USGS Science⌕ Search

SEARCH · USGS Science

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources
USGS1993

The Hatu gold anomaly, Xinjiang-Uygur Autonomous Region, China - testing the hypothesis of aeolian transport of gold

In 1987, a cooperative project between the U.S. Geological Survey and the Institute of Geophysical and Geochemical Exploration was initiated to evaluate the origin of the Hatu gold anomaly. The anomaly is located in the Hatu mining district in the northwest corner of Xinjiang-Uygur Autonomous Region in northwest China. The climate is semiarid to arid and wind erosion predominates. A regional soil survey of the Hatu district, based on samples collected on a 200 by 500 m grid and composited prior to chemical analysis to a density of one sample per square km, delineated a series of south-southeast-trending Au anomalies. Anomalous Au values range from 5 ppb to more than 700 ppb. The Hatu anomaly, the most prominent of these anomalies, is more than 30 km long and about 5 km wide. The mining town of Hatu and the economic gold deposits of Qiqu 1 and Qiqu 2 are at the northern end of this anomaly. The axis of the Hatu anomaly cuts across mapped structure and stratigraphy in the district, but is parallel to the prevailing wind direction. This observation led to the hypothesis that the Hatu anomaly is the result of acolian dispersion of gold from the vicinity of Qiqu 1 and Qiqu 2. The alternative interpretation, that the anomalies reflected additional primary gold occurrences, was not consistent with existing information on the known occurrences and the geology.

Journal of Geochemical Exploration↗
USGS2010

Geologic map of the Bartlett Springs Fault Zone in the vicinity of Lake Pillsbury and adjacent areas of Mendocino, Lake, and Glenn Counties, California

The Lake Pillsbury area lies in the eastern part of the northern California Coast Ranges, along the east side of the transform boundary between the Pacific and North American plates (fig. 1). The Bartlett Springs Fault Zone is a northwest-trending zone of faulting associated with this eastern part of the transform boundary. It is presently active, based on surface creep (Svarc and others, 2008), geomorphic expression, offset of Holocene units (Lienkaemper and Brown, 2009), and microseismicity (Bolt and Oakeshott, 1982; Dehlinger and Bolt, 1984; DePolo and Ohlin, 1984). Faults associated with the Bartlett Springs Fault Zone at Lake Pillsbury are steeply dipping and offset older low to steeply dipping faults separating folded and imbricated Mesozoic terranes of the Franciscan Complex and interleaved rocks of the Coast Range Ophiolite and Great Valley Sequence. Parts of this area were mapped in the late 1970s and 1980s by several investigators who were focused on structural relations in the Franciscan Complex (Lehman, 1978; Jordan, 1975; Layman, 1977; Etter, 1979). In the 1980s the U.S. Geological Survey (USGS) mapped a large part of the area as part of a mineral resource appraisal of two U.S. Forest Service Roadless areas. For evaluating mineral resource potential, the USGS mapping was published at a scale of 1:62,500 as a generalized geologic summary map without a topographic base (Ohlin and others, 1983; Ohlin and Spear, 1984). The previously unpublished mapping with topographic base is presented here at a scale of 1:30,000, compiled with other mapping in the vicinity of Lake Pillsbury. The mapping provides a geologic framework for ongoing investigations to evaluate potential earthquake hazards and structure of the Bartlett Springs Fault Zone. This geologic map includes part of Mendocino National Forest (the Elk Creek Roadless Area) in Mendocino, Glenn, and Lake Counties and is traversed by several U.S. Forest Service Routes, including M1 and M6 (fig. 2). The study area is characterized by northwest-trending ridges separated by steep-sided valleys. Elevations in this part of the Coast Ranges vary from 1,500 ft (457 m) to 6,600 ft (2,012 m), commonly with gradients of 1,000 ft per mile (90 m per km). The steep slopes are covered by brush, grass, oak, and conifer forests. Access to most of the area is by county roads and Forest Service Route M6 from Potter Valley to Lake Pillsbury and by county road and Forest Service Route M6 and M1 from Upper Lake and State Highway 20. From the north, State Highway 261 provides access from Covelo. Forest Service Route M1 trends roughly north from its intersection with Route M6 south of Hull Mountain and through the Elk Creek and Black Butte Roadless areas to State Highway 261. Side roads used for logging and jeep trails provide additional access in parts of the area.

Open-File Report↗
USGS1987

The crustal structure of the axis of the Great Valley, California, from seismic refraction measurements

In 1982 the U.S. Geological Survey collected six seismic refraction profiles in the Great Valley of California: three axial profiles with a maximum shot-to-receiver offset of 160 km, and three shorter profiles perpendicular to the valley axis. This paper presents the results of two-dimensional raytracing and synthetic seismogram modeling of the central axial profile. The crust of the central Great Valley is laterally heterogeneous along its axis, but generally consists of a sedimentary section overlying distinct upper, middle, and lower crustal units. The sedimentary rocks are 3-5 km thick along the profile, with velocities increasing with depth from 1.6 to 4.0 km/s. The basement (upper crust) consists of four units: 1. (1) a 1.0-1.5 km thick layer of velocity 5.4-5.8 km/s, 2. (2) a 3-4 km thick layer of velocity 6.0-6.3 km/s, 3. (3) a 1.5-3.0 km thick layer of velocity 6.5-6.6 km/s, and 4. (4) a laterally discontinuous, 1.5 km thick layer of velocity 6.8-7.0 km/s. The mid-crust lies at 11-14 km depth, is 5-8 km thick, and has a velocity of 6.6-6.7 km/s. On the northwest side of our profile the mid-crust is a low-velocity zone beneath the 6.8-7.0 km/s lid. The lower crust lies at 16-19 km depth, is 7-13 km thick, and has a velocity of 6.9-7.2 km/s. Crustal thickness increases from 26 to 29 km from NW to SE in the model. Although an unequivocal determination of crustal composition is not possible from P-wave velocities alone, our model has several geological and tectonic implications. We interpret the upper 7 km of basement on the northwest side of the profile as an ophiolitic fragment, since its thickness and velocity structure are consistent with that of oceanic crust. This fragment, which is not present 10-15 km to the west of the refraction profile, is probably at least partially responsible for the Great Valley gravity and magnetic anomalies, whose peaks lie about 10 km east of our profile. The middle and lower crust are probably gabbroic and the product of magmatic or tectonic underplating, or both. The crustal structure of the Great Valley is dissimilar to that of the adjacent Diablo Range, suggesting the existence of a fault or suture zone throughout the crust between these provinces.

California↗
USGS2001

The geology of a part of Acadia and the nature of the Acadian orogeny across Central and Eastern Maine

The zone of Acadian collision between the Medial New England and Composite Avalon terranes is well preserved in Maine. A transect from northwest (Rome) to southeast (Camden) crosses the eastern part of Medial New England comprising the Central Maine basin, Liberty-Orrington thrust sheet, and Fredericton trough, and the western part of Composite Avalon, including the Graham Lake, Clarry Hill, and Clam Cove thrust sheets. U-Pb geochronology of events before, during, and after the Acadian orogeny helps elucidate the nature and distribution of tectonostratigraphic belts in this zone and the timing of some Acadian events in the Northern Appalachians. The Central Maine basin consists of sedimentary and volcanic rocks of Middle Ordovician (∼470 to ∼460 Ma) age overlain with probable conformity by latest Ordovician(?) through earliest Devonian marine rift and flysch sedimentary rocks; these are intruded by weakly to undeformed plutonic rocks of Early and Middle Devonian age (∼399–378 Ma). The Fredericton trough consists of Early Silurian gray pelite and sandstone to earliest Late Silurian calcareous turbidite, deformed and variably metamorphosed prior to the emplacement of Late Silurian (∼422 Ma) and Early to Late Devonian (∼418 to ∼368 Ma) plutons. The Liberty-Orrington thrust sheet consists of Cambrian(?)-Ordovician (>∼474 to ∼469 Ma and younger) clastic sedimentary and volcanic rocks intruded by highly deformed Late Silurian (∼424 to ∼422 Ma) and Devonian (∼418 to ∼389 Ma) plutons, possibly metamorphosed in Late Silurian time (prior to ∼417 Ma), and metamorphosed to amphibolite facies in Early to Middle Devonian time (∼400 to ∼381 Ma). The Graham Lake thrust sheet contains possible Precambrian rocks, Cambrian sedimentary rocks with a volcanic unit dated at ∼503 Ma, and Ordovician rocks with possible Caradocian Old World fossils, metamorphosed and deformed in Silurian time and intruded by mildly to undeformed Late Silurian (∼421 Ma) and Late Devonian (∼371 to ∼368 Ma) plutons. The Clarry Hill thrust sheet consists of poorly studied, highly metamorphosed Cambrian (?) rocks. The Clam Cove thrust sheet contains highly deformed Precambrian limestone, shale, sandstone, and conglomerate, metamorphosed to epidote amphibolite facies and intruded by a mildly deformed pluton dated at ∼421 Ma. Metamorphism, deformation, and voluminous intrusive igneous activity of Silurian age are common to both the most southeastern parts of Medial New England and the thrust sheets of Composite Avalon. In contrast to Medial New England, the thrust sheets of Composite Avalon show only modest effects of Devonian deformation and metamorphism. Regional stratigraphic relations, paleontologic findings, and U-Pb geochronology suggest that the Graham Lake, Clarry Hill, and Clam Cove thrust sheets are far-traveled allochthons that were widely separated from Medial New England in the Silurian. One hundred nine (109) new U-Pb analyses of zircon, monazite, and sphene from 25 samples of metamorphosed, stratified, and intrusive igneous rocks are used to decipher the history of events along the transect. In our view, many of the structures within Medial New England were formed during the closing of the back-arc ocean during the waning stages of the Taconian orogeny. These features include the precursors to the upright folds found in Silurian sedimentary rocks, the west-facing Liberty-Orrington thrust sheet, and the Silurian plutons of Medial New England. Acadian tectonic features, including flysch sedimentation, igneous activity, deformation with nappe emplacement, and metamorphism record the progressive loading of Medial New England by a stack of thrust nappes emplaced in latest Silurian to Middle Devonian time. The Acadian orogeny is a prolonged event, lasting from earliest Late Silurian to the Late Devonian, whose evolution involved: (1) convergence between Medial New England and Composite Avalon along an east-dipping subduction zone from earliest Late Silurian to Early Devonian time; (2) collision and concurrent delamination of lithospheric mantle beneath Medial New England in Early Devonian time resulting in deformation, high-grade metamorphism, and intrusive igneous activity in the most eastern part of Medial New England and the western parts of Composite Avalon; (3) Early to Middle Devonian northwest-migrating penetrative deformations of the Acadian Main stage, including northwest-directed thrusting and recumbent folding followed by tightening of folds possibly produced in the waning stages of the Taconian orogeny and forming folded wave trains of isoclinal folds (∼419 to ∼404 Ma), (4) asymmetrical folds produced by east-west shortening (∼399 to ∼380 Ma); and (5) final westward emplacement of Composite Avalon thrust sheets onto Medial New England in Late Devonian time (∼380 to ∼371 Ma). The present boundary between rocks of Medial New England and Composite Avalon at the surface is the Sennebec Pond fault, a high-angle fault that cuts the Graham Lake and Clarry Hill thrusts, and is intruded by the Mt. Waldo pluton (∼371), one of several Late Devonian plutons (∼371 to ∼367 Ma) that mark the end of the Acadian orogeny in coastal Maine. The thrust sheets of Composite Avalon carried rocks of peri-Gondwanan affinity and with possible Old World fauna many kilometers to the west over Medial New England, thus potentially hiding the original suture at depth under the Gulf of Maine.

Maine↗
USGS1999

McVCO handbook 1999

McVCO is a microcontroller-based frequency generator that replaces the voltage controlled oscillator (VCO) used in the analog telemetry of seismic data. It accepts low-level signals from a seismometer and produces a frequency modulated subcarrier suitable for radio or telephone links to a data collection site. McVCO was designed for the purpose of improving the analog telemetry of signals within the Pacific Northwest Seismograph Network (PNSN). Its development received support from the University of Washington Geophysics Program, and both the Volcano Hazards and Earthquake Hazards programs of the United States Geological Survey (USGS). This handbook covers operation of McVCO, provides a technical reference for those who require a closer look at how McVCO works, and covers a collection of topics that need explicit treatment or that spring from deployment of the instrument.

Open-File Report↗
USGS2016

Potentiometric surfaces, summer 2013 and winter 2015, and select hydrographs for the Southern High Plains aquifer, Cannon Air Force Base, Curry County, New Mexico

Cannon Air Force Base (Cannon AFB) is located in the High Plains physiographic region of east-central New Mexico, about 5 miles west of Clovis, New Mexico. The area surrounding Cannon AFB is primarily used for agriculture, including irrigated cropland and dairies. The Southern High Plains aquifer is the principal source of water for Cannon AFB, for the nearby town of Clovis, and for local agriculture and dairies. The Southern High Plains aquifer in the vicinity of Cannon AFB consists of three subsurface geological formations: the Chinle Formation of Triassic age, the Ogallala Formation of Tertiary age, and the Blackwater Draw Formation of Quaternary age. The Ogallala Formation is the main water-yielding formation of the Southern High Plains aquifer. Groundwater-supplied, center-pivot irrigation dominates pumping from the Southern High Plains aquifer in the area surrounding Cannon AFB, where the irrigation season typically extends from early March through October. The U.S. Geological Survey has been monitoring groundwater levels in the vicinity of Cannon AFB since 1954 and has developed general potentiometric-surface maps that show groundwater flow from northwest to southeast in the study area. While previous potentiometric-surface maps show the general direction of groundwater flow, a denser well network is needed to show details of groundwater flow at a local scale. Groundwater levels were measured in 93 wells during summer 2013 and 100 wells during winter 2015. The summer and winter potentiometric-surface maps display the presence of what is interpreted to be a groundwater trough trending from the northwest to the southeast through the study area. This groundwater trough may be the hydraulic expression of a Tertiary-age paleochannel. Groundwater north of the trough flows in a southerly direction into the trough, and groundwater south of the trough flows in an easterly direction into the trough. During the 18-month period between summer 2013 and winter 2015, changes in groundwater levels ranged from a rise of 10.0 to a decline of 3.8 feet. The regions to the north and south of the groundwater trough contained the majority of the rises in groundwater levels, whereas the regions within the trough contained the majority of the declines in groundwater levels. In contrast, the long-term groundwater-level trend in wells with 20 to 60 years of record is a steady decline in average annual water levels, with declines ranging from 0.41 to 2.81 feet per year. Overall, the northwestern part of the study area exhibits the smallest average annual declines, while the southeastern part of the study area exhibits the largest average annual declines.

New Mexico↗
USGS2020

Hydrogeology and groundwater flow in alluvial deposits, north Summerset, South Dakota

The city of Summerset is a growing community in west South Dakota. The Sun Valley Estates subdivision in the north part of the city was developed on unconsolidated deposits surrounded by steep terrain. During years with greater than normal precipitation, particularly in 2019, groundwater levels increased in the unconsolidated deposits and caused damage to stormwater systems, sewer infrastructure, and houses with basements. The U.S. Geological Survey, in cooperation with the City of Summerset, completed a study of the hydrogeology and groundwater flow in the alluvial aquifer part of the unconsolidated deposits in north Summerset to understand the groundwater system in the area and to provide hydrogeologic information in support of future development planning. The study area included most of the Sun Valley Estates subdivision in the north part of the city of Summerset in the east Black Hills of west South Dakota. About 0.7 square mile of water-bearing alluvial deposits is included in the study area. Precipitation in the study area from 2017 to 2019 was compared to the monthly normal values at a nearby climate site. The largest departure from normal was in May 2019 with precipitation exceeding the monthly normal by about 5 inches (in.). All months in 2019, except March, exceeded the monthly normal precipitation. Cumulative departure from normal precipitation in 2019 increased from about 4 in. greater than normal in January to about 18 in. greater than normal in December. The geologic setting of the study area is characterized by the surrounding Black Hills. Unconsolidated Quaternary-age deposits overlie consolidated to partially consolidated Mesozoic-age and Paleozoic-age shales, sandstones, and limestones. Surficial deposits of alluvium and other unconsolidated deposits are the primary surficial geologic units in the study area and form the components of the alluvium hydrogeologic unit of the study area. Results from previous studies of alluvium along nearby Rapid Creek estimated hydraulic conductivity to range from 89 to 2,292 feet per day (ft/d), transmissivity to range from 1,001 to 32,083 feet squared per day, and storage coefficients to range from 0.0002 to 0.16. Hydraulic conductivity and transmissivity generally decreased downstream along Rapid Creek (west to east). Slug tests were completed August 16, 2019, at two observation wells completed in the alluvial aquifer in the Sun Valley Estates subdivision to determine hydraulic conductivity. Hydraulic conductivity estimated from AQTESOLV curve-fitting analysis using the Bouwer-Rice method for all slug-in and slug-out trials from two observation wells in the study ranged from 0.20 to 0.26 ft/d for well 441318103220001 (SunValley1 well) and from 0.54 to 14 ft/d for well 441319103215701 (SunValley2 well). The mean, median, and standard deviation of all trials at both wells were 4.3 ft/d, 0.8 ft/d, and 5.6 ft/d, respectively. The extent of the alluvial aquifer was determined by geologic maps and lithologic logs. Alluvial deposits in the study area extend to about 1 mile in the north–south direction and about 1.5 miles in the southeast–northwest direction. The direction of groundwater flow was estimated using water-level records and topographic maps. The resulting potentiometric map indicated that groundwater in the alluvial aquifer under the Sun Valley Estates subdivision originates from higher elevations of the west part of the area of interest and from streams in the southeast part. Recharge and evapotranspiration estimates were results from a Soil-Water Balance model that calculated a matrix of recharge for 2019 with values ranging from 0 to 11.4 in. and an annual mean value of 5.1 in. across the study area. Soil-Water Balance-estimated potential evapotranspiration for 2019 ranged from 28.90 to 28.75 in. and the estimated annual mean was 28.86 in. across the study area. Estimated groundwater budget components for the alluvial aquifer in the area of interest included inflows and outflows. Total estimated groundwater budget components for inflows for 2019 were about 66 percent from recharge, 33 percent from streamflow, and 1 percent from inflow from adjacent aquifers. Total estimated outflows were about 99-percent evapotranspiration and less than 1-percent outflow to adjacent aquifers.

South Dakota↗
USGS1995

Geohydrology and water quality of the Durham Center Area, Durham, Connecticut

Contaminated ground water is widespread and persistent beneath the Durham Center area in the town of Durham, Conn. Most of the contaminants are organic halides, usually trichloroethene, 1,1,1-trichloroethane, and tetrachloroethene. Less extensive chemical contamination of surface water, soil, and glacial sediments also has been detected. Two manufacturing companies, located at the northern and southern ends of this largely residential area, are believed to be the principal sources of the organic compounds detected in ground water. The contamination of water in the bedrock, the primary source of drinking water throughout the area, is the major environmental concern. Maximum concentrations of trichloroethene in three bed- rock wells range from 4,500 to about 5,500 mg/L (micrograms per liter). Concentrations of trichloroethene greater than 5 mg/L, the maximum contaminant level established for drinking water by the U.S Environmental Protection Agency, have regularly been detected in water samples from many other bedrock wells for at least 9 years. The geohydrology of the area is highly complex. Compact lodgment till that is up to 30 feet thick and probably fractured, overlies the bedrock. The bedrock is lithologically heterogeneous, and con- sists mostly of red fluvial sandstone, siltstone, and conglomerate; it is locally interbedded with black lacustrine shales and gray sandstones. Lithology and stratigraphy interpreted from borehole-geophysical logs at Durham Center are consistent with the Portland Formation subfacies described in earlier geologic studies. Beds strike nearly north-south and dip gently eastward. At least one high-angle normal fault transects the bedrock; it strikes northeast and dips northwest. Acoustic televiewer logs, measurements at out-crops, and azimuthal, square-array, resistivity data indicate a dominance of northeast-striking fractures that dip steeply northwest and southeast. Less prevalent strike directions are north to east-north-east. The till and sedimentary bedrock are dual-porosity, dual-permeability media. The hydraulic conductivity of the bulk mass of till is believed to be on the order of tenths of a foot per day to about 2.5 feet per day, with a total porosity of about 25 percent and an estimated average fracture porosity of less than 1 percent. The reported transmissivities of the bedrock range from less than 1 to about 17,000 feet squared per day and storativity is generally about 10-4, but the accuracy of these values is uncertain. The intergranular porosity of the sandstone units is estimated to average 5 percent, and estimates of fracture porosity from square-array, resistivity soundings at two sites were 1.1 and 2.7 percent. The bedrock has characteristics of both a single aquifer and a multi-unit, artesian or leaky aquifer system. A local ground-water-flow system that includes the upper part of the bedrock is unconfined. A large- scale flow system in deeper parts of the bedrock has transported organic compounds across topographic drainage divides. Borehole-geophysical logs and head measurements indicate that the natural ground- water-flow system in the bedrock has been altered by drilled wells that connect fractures and by with- drawals from wells. A conceptual model of the movement and fate of organic contaminants suggests that (1) nonaqueous phase organic halides are retained near their source; (2) flow is primarily through fractures in the till and through fractures and bedding-plane openings in the sedimentary rocks; (3) retardation of contaminants occurs primarily by diffusion from fractures into the aquifer matrix; and (4) transport directions of dissolved organic halides are controlled by a combination of natural hydraulic gradients, hydraulic gradients produced by the cyclical pumping of wells, and by the strike directions of bedrock faults, fractures, and bedding planes.

Connecticut↗
USGS1999

Application of continuous seismic-reflection techniques to delineate paleochannels beneath the Neuse River at U.S. Marine Corps Air Station, Cherry Point, North Carolina

A continuous seismic-reflection profiling survey was conducted by the U.S. Geological Survey on the Neuse River near the Cherry Point Marine Corps Air Station during July 7-24, 1998. Approximately 52 miles of profiling data were collected during the survey from areas northwest of the Air Station to Flanner Beach and southeast to Cherry Point. Positioning of the seismic lines was done by using an integrated navigational system. Data from the survey were used to define and delineate paleochannel alignments under the Neuse River near the Air Station. These data also were correlated with existing surface and borehole geophysical data, including vertical seismic-profiling velocity data collected in 1995. Sediments believed to be Quaternary in age were identified at varying depths on the seismic sections as undifferentiated reflectors and lack the lateral continuity of underlying reflectors believed to represent older sediments of Tertiary age. The sediments of possible Quaternary age thicken to the southeast. Paleochannels of Quaternary age and varying depths were identified beneath the Neuse River estuary. These paleochannels range in width from 870 feet to about 6,900 feet. Two zones of buried paleochannels were identified in the continuous seismic-reflection profiling data. The eastern paleochannel zone includes two large superimposed channel features identified during this study and in re-interpreted 1995 land seismic-reflection data. The second paleochannel zone, located west of the first paleochannel zone, contains several small paleochannels near the central and south shore of the Neuse River estuary between Slocum Creek and Flanner Beach. This second zone of channel features may be continuous with those mapped by the U.S. Geological Survey in 1995 using land seismic-reflection data on the southern end of the Air Station. Most of the channels were mapped at the Quaternary-Tertiary sediment boundary. These channels appear to have been cut into the older sediments and deepen in a southerly or downgradient direction. If these paleochannels continue beneath the Marine Corps Air Station and are filled with permeable sediment, they may act as conduits for ground-water flow or movement of contaminants between the surficial and underlying freshwater aquifers where confining units are breached.

North Carolina↗
USGS2014

Digital data for preliminary geologic map of the Mount Hood 30- by 60-minute quadrangle, northern Cascade Range, Oregon

The Mount Hood 30- by 60-minute quadrangle covers the axis and east flank of the Cascade Range in northern Oregon. Its namesake, Mount Hood volcano, dominates the view in the northwest quarter of the quadrangle, but the entire area is underlain by Oligocene and younger volcanic and volcaniclastic rocks of the Cascade Range. Since the time of the Columbia River Basalt Group about 15 million years (m.y.) ago, the locus and composition of Cascade Range volcanism have shifted sporadically across the map area. Andesitic eruptions were predominant in the western part from about 14 to 10 m.y. ago (Salmon and Sandy Rivers area), producing the Rhododendron Formation and overlying lava flows. From about 8 to 6.5 m.y. ago, lithic pyroclastic debris of the Dalles Formation was shed by chiefly andesitic volcanoes in the north-central part of the map area (Hood River valley escarpment). Andesitic to dacitic volcanism was again predominant about 5 to 3 m.y. ago, with known eruptive centers located from Lookout Mountain westward to Lolo Pass, probably including the area now occupied by Mount Hood. A major episode of mafic volcanism-basalt and basaltic andesite-began about 3-4 m.y. ago and lasted until about 2 m.y. ago. Volcanism since about 2 m.y. ago has been concentrated along the axis of the High Cascades. North and south of Mount Hood these youngest rocks are predominantly basaltic andesite lava flows; whereas at Mount Hood itself, andesite is predominant, forming pyroclastic and debris-flow deposits and lava flows. This geodatabase contains information derived from legacy mapping that was published in 1995 as U.S. Geological Survey Open-File Report 95-219. The main component of this publication is a geologic map database prepared using geographic information system (GIS) applications. Included are pdf files to view or print the map sheet, the accompanying pamphlet from Open-File Report 95-219, and links to the original publication, which is available as scanned files in pdf format.

Oregon↗
USGS2000

Origin of Amazon mudbanks along the northeastern coast of South America

Seismic profiles, sediment cores, and water column measurements were collected along the northeastern coast of Brazil to examine the origin of mudbanks in the Amazon coastal mud belt. These 10-60-km-long, shore-attached features previously had been observed to migrate along the 1200 km coast of the Guianas in response to wave forcing. CHIRP (3.5 kHz) seismic profiles of the shoreface and inner shelf located two mudbanks updrift of the previous eastern limit in French Guiana. 210Pb geochronology shows that these two banks are migrating to the northwest over a relict mud surface in 5-20 m water depth. The mudbanks are 3-4 m thick and are translating over a modern shoreface mud wedge deposited by previous mudbank passage in < 5 m water depth. Initial mudbank development is taking place on the intertidal and shallow subtidal mudflats at Cabo Cassipore, associated with an alongshore-accreting clinoform feature. Sediment trapping in this area is controlled by the nearshore presence of strong water column stratification produced by the enormous Amazon freshwater discharge on the shelf and by proximity to the Cassipore River estuary. Seasonal and decadal periods of sediment supply and starvation in this area likely are controlled by variations in northwest trade wind intensity. (C) 2000 Elsevier Science B.V.

Marine Geology↗
USGS1986

Age of -360-m reef terrace, Hawaii, and the rate of late Pleistocene subsidence of the island

Observations from a manned submersible vehicle indicate that the −360-m reef terrace northwest of the island of Hawaii is a drowned coral reef. The preferred uranium-series age of coralline algae collected from the reef face is 120 ± 5 ka. This age agrees with the notion that the reef was drowned during the sea-level rise following the major lowstand of the sea that occurred at 145 ka (oxygen isotope stage 6). This drowning pattern is similar to the previously determined radiocarbon age of 13 ka for drowning of the −150-m reef off west Hawaii, which drowned during the sea-level rise following the last major lowstand of the sea at 18 ka (oxygen isotope stage 2). Estimated average subsidence of the reef site off northwest Hawaii is 2.7 mm/yr since final drowning of the −360-m reef.

Hawaii↗
USGS2021

Field response and surface rupture characteristics of the 2020 M6.5 Monte Cristo Range earthquake, central Walker Lane, Nevada

The M 6.5 Monte Cristo Range earthquake that occurred in the central Walker Lane on 15 May 2020 was the largest earthquake in Nevada in 66 yr and resulted in a multidisciplinary scientific field response. The earthquake was the result of left‐lateral slip along largely unmapped parts of the Candelaria fault, one of a series of east–northeast‐striking faults that comprise the Mina deflection, a major right step in the north–northwest structural grain of the central Walker Lane. We describe the characteristics of the surface rupture and document distinct differences in the style and orientation of fractures produced along the 28 km long rupture zone. Along the western part of the rupture, left‐lateral and extensional displacements occurred along northeasterly and north‐striking planes that splay off the eastern termination of the mapped Candelaria fault. To the east, extensional and right‐lateral displacements occurred along predominantly north‐striking planes that project toward well‐defined Quaternary and bedrock faults. Although, the largest left‐lateral displacement observed was ∼ 20 cm ⁠ , the majority of displacements were < 5 cm and were distributed across broad zones up to 800 m wide, which are not likely to be preserved in the geologic record. The complex pattern of surface rupture is consistent with a network of faults defined in the shallow subsurface by aftershock seismicity and suggests that slip partitioning between east‐striking left‐lateral faults and north to northwest‐striking right‐lateral faults plays an important role in accommodating northwest‐directed transtension in the central Walker Lane.

Nevada↗
USGS2020

U.S. Geological Survey Earthquake Science Center

The mission of the U.S. Geological Survey (USGS) Earthquake Science Center is to collect a wide range of data on earthquakes, faults, and crustal deformation; conduct research to increase our understanding of earthquake source processes, occurrence, and effects; and synthesize this knowledge into probabilistic seismic hazard assessments, aftershock forecasts, and ground-shaking scenarios for anticipated major earthquakes. We disseminate these data products, hazard assessments, and research discoveries to scientists, engineers, emergency managers, and the public. With university and State partners, we operate the California Integrated Seismic Network and the Pacific Northwest Seismic Network, as well as geodetic networks throughout the western United States. We also lead the National Strong Motion Project and the ShakeAlert earthquake early warning (EEW) system; house renowned rock mechanics laboratories and deep borehole geophysics facilities; and conduct extensive geophysical, geologic, and paleoseismic investigations along active faults. We are funded primarily by the USGS Earthquake Hazards Program, with additional support from the USGS Volcano Hazards and Energy Resources Programs, other Federal and State agencies, private foundations, and public and private utilities and corporations.

California↗
USGS2007

Publications of the Western Earth Surfaces Processes Team 2005

Introduction The Western Earth Surface Processes Team (WESPT) of the U.S. Geological Survey (USGS) conducts geologic mapping, earth-surface process investigations, and related topical earth science studies in the western United States. This work is focused on areas where modern geologic maps and associated earth-science data are needed to address key societal and environmental issues such as ground-water quality, landslides and other potential geologic hazards, and land-use decisions. Areas of primary emphasis in 2005 included southern California, the San Francisco Bay region, the Mojave Desert, the Colorado Plateau region of northern Arizona, and the Pacific Northwest. The team has its headquarters in Menlo Park, California, and maintains smaller field offices at several other locations in the western United States. The results of research conducted by the WESPT are released to the public as a variety of databases, maps, text reports, and abstracts, both through the internal publication system of the USGS and in diverse external publications such as scientific journals and books. This report lists publications of the WESPT released in 2005 as well as additional 2002, 2003, and 2004 publications that were not included in the previous lists (USGS Open-File Reports 03-363, 2004- 1267, 2005-1362). Most of the publications listed were authored or coauthored by WESPT staff. The list also includes some publications authored by non-USGS cooperators with the WESPT, as well as some authored by USGS staff outside the WESPT in cooperation with WESPT projects. Several of the publications listed are available on the World Wide Web; for these, URL addresses are provided. Many of these web publications are USGS Open-File reports that contain large digital databases of geologic map and related information. Information on ordering USGS publications can be found on the World Wide Web at http://www.usgs.gov/pubprod/, or by calling 1-888-ASK-USGS. The U.S. Geological Survey's web server for geologic information in the western United States is located at http://geology.wr.usgs.gov/. More information is available about the WESPT is available on-line at http://geology.wr.usgs.gov/wgmt.

Open-File Report↗
USGS2019

Geology and assessment of undiscovered oil and gas resources of the Vilkitskii Basin Province, 2008

The Vilkitskii Basin is a separate petroleum province that lies beneath the continental shelf of the East Siberian Sea east of the New Siberian Islands and northwest of Wrangel Island. It is a basin known only on the basis of gravity data and three seismic profiles. A small, southern part of the basin overlies the Brooks Range–Chukotka late Mesozoic-early Paleogene orogenic belt, but most of the basin lies north of that belt. Its regional setting suggests that it may have similarities to other post-orogenic (successor) basins on the East Siberian Shelf as well as to foreland, rift-sag, and passive margin basins lying north of the orogenic belt such as the North Slope, North Chukchi and Podvodnikov Basins. Although the basin’s petroleum potential is poorly known, extremely thick sediments, diapiric structures, and gas plumes interpreted from a seismic profile are considered favorable features for petroleum presence and imply that there may be an active petroleum system. An overall probability of about 30 percent of at least one petroleum accumulation >50 MMBOE (million barrels of oil equivalent) was determined based on estimated probabilities of the occurrence of petroleum source, adequate reservoir, trap and seal, and favorable timing. A single assessment unit (AU) was defined and assessed, resulting in mean estimates of undiscovered, technically recoverable resources that include about 100 million barrels of oil and 5,500 billion cubic feet of nonassociated gas.

Professional Paper↗
USGS1947

Geology and ground-water resources of the island of Molokai, Hawaii

The island of Molokai is the fifth largest of the Hawaiian Islands, with an area of 250 square miles. It lies 25 miles southeast of Oahu, and 8.5 miles northwest of Maui. It consists of two principal parts, each a major volcanic mountain. East Molokai rises to 4,970 feet altitude. It is built largely of basaltic lavas, with a thin cap of andesites and a little trachyte. The volcanic rocks of East Molokai are named the East Molokai volcanic series, the basaltic part being separated as the lower member of the series, and the andesites and trachytes as the upper member. Large cinder cones and bulbous domes are associated with the lavas of the upper member. Thin beds of ash are present locally in both members. The lavas of the lower member are cut by innumerable dikes lying in two major rift zones trending eastward and northwestward. A large caldera, more than 4 miles long, and a smaller pit 0.8 mile across existed near the summit of the volcano. The rocks formed in and under the caldera are separated on plate 1 as the caldera complex. Stream erosion has cut large amphitheater-headed valleys into the northern coast of East Molokai, exposing the dikes and the caldera complex. West Molokai is lower than East Molokai, rising to 1,380 feet altitude. It was built by basaltic lavas erupted along rift zones trending southwestward and northwestward. Many of the flows were unusually fluid. The volcanic rocks of West Molokai Volcano are named the West Molokai volcanic series. Along its eastern side, the mountain is broken by a series of faults along which its eastern edge has been dropped downward. West Molokai Volcano became extinct earlier than East Molokai Volcano, and its flank is partly buried beneath lavas of East Molokai. Both volcanic mountains were built upward from the sea floor probably during Tertiary time. Following the close of volcanic activity stream erosion cut large canyons on East Molokai, but accomplished much less on drier West Molokai. Marine erosion attacked both parts of the island, producing high sea-cliffs on the windward coast. In late Tertiary or early Pleistocene time the island was submerged to a level at least 560 feet above the present shore line, then reemerged. Later shifts of sea level, probably partly resulting from Pleistocene glaciation and deglaciation, ranged from 300 feet below to 100 feet or more above present sea level. Marine deposits on the southern slope extend to an altitude of at least 200 feet. Eruption of the Kalaupapa basalt built a small lava cone at the foot of the northern cliff, forming Kalaupapa peninsula; and a small submarine eruption off the eastern end of Molokai built the Mokuhooniki tuff cone, the fragments of which now form Hooniki and Kanaha Islands. Deposition of marine and fluviatile sediments has built a series of narrow flats close to sea-level along the southern coast. Nearly the entire island is underlain, close to sea level, by ground water of the basal zone of saturation. Beneath West Molokai, the Hoolehua Plain between West and East Molokai, and the southern coastal area of East Molokai, the basal water is brackish. Beneath much of East Molokai, fresh basal water is obtainable. Small amounts of fresh water are perched at high levels in East Molokai by thin poorly permeable ash beds. Fresh water is confined at high levels in permeable compartments between poorly permeable dikes in the rift zones of East Molokai, and can be developed by tunnels. Projects to bring the abundant surface and ground water of the large wind ward valleys to the Hoolehua Plain are described. Future developments are suggested. All wells and water-development tunnels are described in tables.

Hawaii↗