USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Earthquake Engineering (JEE)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,705 records · Page 24Linked to original sources
USGS2025

Seismic moment and local magnitude scales in Ridgecrest, CA from the SCEC/USGS Community Stress Drop Validation Study

We illustrate the systematic difference between moment magnitude and local magnitude caused by underlying earthquake source physics, using seismic moments submitted to the Statewide California Earthquake Center/United States Geological Survey Community Stress Drop Validation Study 2019 Ridgecrest data set. While the relationship between seismic moment and moment magnitude ( M or M w ) of log 10 ( M 0 ) ~ 1.5* M is uniformly valid for all earthquake sizes by definition (Hanks and Kanamori, 1979), the relationship between local magnitude M L and moment is itself magnitude dependent. For moderate events, ~3< M < ~6, M and M L are coincident; for earthquakes smaller than ~3, M L ~ 1.0 log 10 M 0 (Hanks and Boore, 1984). This is a physical consequence of the corner frequency fc becoming larger than the upper frequency of observation and implies that M L and M differ systematically by a factor of 1.5 for these small events. While this idea is not new, we propose a new, continuous relationship between local magnitude and moment, for magnitudes 2 to 6 which extrapolates to smaller and larger magnitudes, applicable to southern California specific to the Ridgecrest region. We make use of the plethora of seismic moments as submitted by many participants of the Community Stress Drop study, compared to the Southern California Seismic Network (SCSN) catalog magnitudes. Overall, the seismic moments in the Community Study recover moment magnitude well, so we use our new M L - M 0 to convert M L to M , refining the SCSN operational M Lr scale. This systematic difference of 50% in slope between local and moment magnitude at small magnitudes has implications for spectral stress drop estimates, earthquake ground motion modeling, as well as other magnitude scales and earthquake occurrence statistics.

California↗
USGS2026

Ground-motion aleatory-variability models for Puerto Rico and the U.S. Virgin Islands

I develop independent logic trees for aleatory variability for crustal and subduction-zone (interface and intraslab) earthquakes for seismic hazards analyses in Puerto Rico and the U.S. Virgin Islands (PRVI) from existing suites of ground-motion models (GMMs) and from ground-motion datasets, including a regional PRVI dataset. The aleatory variability models are parameterized using a partially nonergodic partitioning of standard deviation that consists of independently developed between-event ( ), site-to-site ( ), and event-corrected single-station ( ) standard deviation components. The effects of nonlinear site response on aleatory variability are incorporated through additional terms that modify the standard deviation components. Because one goal of this work is to develop independent logic trees for aleatory variability that synthesize the aleatory variability models from GMMs, I make use of the functional forms of the input GMMs. The PRVI dataset contains a limited number of stations with high-quality site metadata and does not contain records from earthquakes with magnitudes greater than 6.1, so I choose not to develop the aleatory variability models from the regional dataset alone. Instead, the standard deviation components from regional ground-motion data are evaluated against the components derived from GMMs and from available global datasets, and regionalized standard deviation components are incorporated where there is evidence that regional effects exhibit substantial differences. The resulting logic trees for aleatory variability consist of models of and that are consistent with semiempirical GMMs for active crustal and subduction-zone regimes, and two alternative models of , including one model that exhibits site-to-site variability informed by PRVI data, with values that exceed global models. The aleatory variability models may be considered in future hazards assessments in PRVI to simplify the hazard calculations, to incorporate regional ground-motion variability effects, and to enable direct logic-tree weighs of aleatory variability.

Puerto Rico, U.S. Virgin Islands↗
USGS2025

Implications of physics-based M9 ground motions on liquefaction-induced damage in the Cascadia Subduction Zone: Looking forward and backward

Given the likelihood of future M9 Cascadia Subduction Zone (CSZ) earthquakes, various estimates of the resulting, regional ground motions have been made, including a suite of 30 physics-based simulations that reflect key modeling uncertainties. However, because the last CSZ interface rupture occurred in 1700 CE, the shaking expected in such an event is especially uncertain, as are the impacts to the built and living environments. Like other coseismic impacts, soil liquefaction poses a significant threat and must be considered by any scenario study used to inform planning and response, or to focus mitigation resources. Liquefaction is also notable for its potential to “ground truth” ground-motion estimates, given that its presence or absence in the geologic record can provide constraint on the intensities of shaking in past events. It is thus an important phenomenon looking both forward and backward. Accordingly, using recent physics-based simulations, this study (1) predicts liquefaction in M9 CSZ ruptures at 400 locations in Oregon, Washington, and British Columbia (BC) using an array of cone-penetration-test based models and (2) uses paleoliquefaction evidence at ten sites spanning from Southern Oregon to Vancouver, BC to constrain possible ground-motion intensities experienced in the 1700 CE earthquake. The forward predictions indicate that liquefaction in M9 events could be pervasive in the region and affect numerous population hubs, with the potential for damage across hundreds of square kilometers. The backward analyses suggest that 1700 CE ground-motion intensities may have been less than expected from M9 simulations in some northern portions of the CSZ (e.g. Seattle), given the paucity of 1700 CE liquefaction evidence in these areas. Ultimately, further discovery and analysis of CSZ paleoliquefaction, or lack thereof, will confirm or modify this possibility and the conclusions drawn herein.

Oregon, Washington↗
USGS2026

Design and function of the Autonomous Benthic Imaging and Surveying System (ABISS) for remote sensing of lake and seabed environments

Lake and seabed environments are home to fisheries and other biota that are important to ecosystems and economies, yet these environments and the species that use them are difficult to accurately assess and monitor. Traditional benthic survey techniques, like bottom trawling used by the U.S. Geological Survey, are limited by substrate constraints, poor spatial resolution and precision, and operational depth limits, hindering accurate assessment of benthic species and habitats. In response to these limitations, the U.S. Geological Survey developed the Autonomous Benthic Imaging and Surveying System, a camera system integrated into underwater vehicles, to capture high-resolution images of the lakebed. The system uses color and stereo cameras to collect imagery, which can be analyzed using computational methods to detect organisms and (or) characterize habitat features, such as geologic substrate types. The system has been integrated into autonomous underwater vehicles and into an underwater housing used by self-contained underwater breathing apparatus (SCUBA) divers. Although the engineering of the system was motivated by the need for data collection in the Great Lakes, it has potential to collect high quality data in any aqueous setting with sufficient water clarity and safe operating conditions. The Autonomous Benthic Imaging and Surveying System can operate across diverse depths and light conditions to map and quantify ecological patterns that were difficult or impossible to assess using traditional methods. The Autonomous Benthic Imaging and Surveying System offers the potential for accurate and precise monitoring and assessment of native benthic biota, invasive species, and habitat, potentially providing natural resource managers with improved information to support decision making about benthic resource management.

Great Lakes↗
USGS2026

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2024

Potentiometric-surface and depth-to-water maps for spring 2024 were created for the Mississippi River Valley alluvial aquifer using groundwater-altitude data from 1,151 wells completed in the Mississippi River Valley alluvial aquifer and from the altitude of the top of the water surface in area rivers from 160 U.S. Geological Survey and U.S. Army Corps of Engineers streamgages. The potentiometric-surface and depth-to-water maps for 2024 were created to support investigations to characterize the Mississippi River Valley alluvial aquifer as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the Mississippi River Valley alluvial aquifer for spring 2024 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 330 feet (ft) above the North American Vertical Datum of 1988. The regional direction of the groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient direction was into the depression, and near rivers, where the groundwater gradient direction was either from the aquifer to the river or from the river into the aquifer. Groundwater depressions in the potentiometric-surface map are in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions. Depth to water by well in the Mississippi River Valley alluvial aquifer in spring 2024 ranged from 0.27 ft above land surface to 145.65 ft below land surface.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗
USGS2025

The impact of 3D structure on coseismic coastal land-level change and tsunami generation in the Cascadia Subduction Zone

Estimates of coseismic vertical displacements from past and potential future subduction zone earthquakes provide critical constraints on regional seismic and tsunami hazard. Many studies use elastic homogeneous half-space models to calculate vertical displacements from a specified earthquake slip distribution, neglecting complexities of 3D structure in subduction zone settings. Here, we use 3D ground motion simulations of potential Cascadia Subduction Zone earthquakes to investigate the impact of realistic 3D Earth structure on estimated vertical displacements. We show that offshore uplift increases when including 3D structure due to high fault slip in low-rigidity accretionary wedge sediments and coastal subsidence decreases due to higher rigidity material at depth. These larger offshore uplifts cause increased tsunami maximum wave heights, and coastal subsidence at paleoseismic sites decreases on average by ∼17 cm, or ∼60%, which can have important implications for the amplitude and extent of slip in earthquake scenarios developed based on paleoseismic data constraints.

California, Oregon, Washington↗
USGS2026

Ground motions from finite faults with unknown geometry

Earthquake emergency response and loss modeling require accurate models of ground‐motion intensity metrics (IMs), such as those produced by ShakeMap. In the critical minutes and hours after an earthquake, however, knowledge of the earthquake source geometry limits the accuracy of these models, especially in areas where seismic instrumentation is insufficient to constrain the shaking intensity pattern. Previous attempts to overcome this limitation have centered on computing the mean distance metrics from a suite of assumed source geometries. That approach is inadequate with modern ground‐motion models (GMMs) because they typically include terms for the hanging wall effect, depth to top of rupture, and other nonlinear terms. Such approaches also propagate the distance uncertainty through the GMMs and may not properly allocate the additional uncertainty into the between‐ and within‐event components. Here we present Finite‐Fault SIMulation with Mixed Effects Regression (FFSIMMER), a method to address these limitations by computing IM distributions from a suite of rupture realizations that fully accounts for all geometry‐related GMM terms and allows for the separation of the between‐ and within‐event components of the total uncertainty. The accuracy of this method is limited by the available constraints on the source parameters. To address this, FFSIMMER can incorporate constraints based on knowledge of the source, such as the approximate strike and dip based on knowledge of the plate tectonics and focal mechanism of the earthquake. We demonstrate the improvement in accuracy that can be achieved with the 2025 M 7.7 Mandalay, Burma (Myanmar), earthquake by incorporating constraints on the range of plausible source parameters.

Bulletin of the Seismological Society of America↗
USGS2025

Fault displacement model for surface principal rupture of strike-slip faults

The probability distribution model for principal displacement accommodated on the surface main trace is a critical input to the fault displacement hazard analysis. This article presents a new model for strike-slip ruptures in the moment magnitude ( M ) range of 6 to 8.3. The new model is the outcome of a multi-year research effort to update the widely used model developed by Petersen and others in 2011. Updates include the adoption of the Fault Displacement Hazard Initiative database and enhancements to rupture and displacement data preparation. Statistical formulation and estimation have also been updated substantially. A three-parameter modified normal distribution that we refer to as the negative Exponentially Modified Gaussian distribution is adopted to model the probability distribution of the natural logarithm of principal displacement. Formulation for the mean parameter of the modified normal includes a random earthquake term, a nonlinear scaling relation with M , and an ellipse function for along-main-trace variation. The aleatory variability of the updated model now depends on M as well as site’s along-main-trace position. These updates not only significantly improve the fit to the distribution of the observed displacements but also yield reasonable 95th percentile predictions for M > 7.5 events. Alternative models representing the estimation uncertainty of the M -scaling relation are also developed. These new models are compared to the previous model in terms of percentile predictions and the calculated hazard curves. The steeper hazard curves from the new models yield a lower exceedance rate than the normal-distribution based model developed previously by Petersen and others.

Earthquake Spectra↗
USGS2024

The 2023 U.S. 50-state National Seismic Hazard Model: Changes in 2023 compared to 2018 ground motions

We present the 2023 U.S. National Seismic Hazard Model (NSHM) for all 50 states that applies new smoothed seismicity, fault rupture, and ground motion models. New data and methods are introduced in the 2023 earthquake rupture forecast that include: new earthquake catalogs - excluding induced earthquakes, alternative declustering methods, spatially smoothed seismicity distributions, full-catalog scaled rates to account for aftershocks, updated CEUS-WUS attenuation boundary, new magnitude-scaling equations, new geodetic and geologic deformation models, and alternative fault system solutions accounting for a more complete representation of epistemic uncertainty potential for earthquake generation in Alaska, Hawaii, and the conterminous U.S. Improved ground motion models consider new Next Generation Attenuation NGASubduction, modified NGA-East, and adjustments to account for regional biases in ground shaking observations. Semi-empirical and 3D simulations of ground motion are applied to account for shaking at 21 oscillator periods, 2 peak motions, and 8 site conditions. Site effects models are constructed for western U.S. basins (Seattle, Portland/Tualatin, San Francisco, Central Valley of California, Los Angeles, and Salt Lake City) and for sites with deep sedimentary wedges found across the central and eastern U.S. Gulf Coast and Atlantic coastal plain regions. These models result in substantial changes compared to the older NSHMs and are differentiated for the earthquake rupture forecast and ground motion model changes to display sensitivities and impacts.

Conference Paper↗
USGS2024

Representation of surface-water flows using Gradient-Related Discharge in an Everglades Network

The Everglades Depth Estimation Network interpolates water-level gage data to produce daily water-level elevations for the Everglades in south Florida. These elevations were used to estimate flow vectors (gradients and directions) and volumetric flow rates using the Gradient-Related Discharge in an Everglades Network (GARDEN) application developed by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers. Flow rates in both the east-west and north-south directions were computed on a 400-meter square grid using modified parameters in the Manning’s equation. The frictional resistance parameter in the Manning’s equation was calibrated to measured flow rates at coastal creeks fed by Everglades Depth Estimation Network boundary flows. Levees and other features that act as barriers to flow were defined as “no-flow” grid cells where vectors were set to zero. The flow volume magnitudes were calibrated with 2020 daily values of coastal river flows, and verification was performed using 2021 data. Within a given day, the measured coastal river flows fluctuate more than the GARDEN boundary flows because of tidal and wind forcings. Because the GARDEN boundary flows were the upstream water source for the coastal rivers, calibration focused on matching average daily flow volumes rather than daily fluctuations. The Pearson’s correlation coefficient is 0.766 for the 2020 calibration period and 0.566 for the 2021 verification period. Applying GARDEN to periods with hydraulic-control-structure releases allows the propagation of structure flows to be seen in the daily flow-vector maps along with the multiday response of flows farther downgradient. Flow vectors may be overestimated near control structures because of difficulties in resolving the water gradient downstream from the structure. Flow vectors farther from the structure are more accurate than those near the structure.

Florida↗
USGS2025

Dendroseismological investigation of redwood trees along the North Coast section of the San Andreas Fault

Sequoia sempervirens (coast redwood) tree rings have the potential to annually resolve late-Holocene earthquakes on the northern San Andreas Fault based on direct (e.g., physical damage) and indirect (e.g., co-seismic environmental change) impacts, but scarcity of suitable samples and challenges crossdating this long-lived species have limited progress. More precise dating of the pre-1906 (penultimate) earthquake can improve hazard assessment and understanding of rupture segmentation. We target old trees (maximum >815 yr) along the North Coast section of the fault (increment cores via rope-climbing, 11 living trees; plunge cuts, 23 stumps) and employ complementary disturbance detection methods including radial-growth averaging (tree- and series-level), cataloging anatomical indicators (e.g., traumatic resin ducts, TRD), and dating structural components (e.g., reiterated trunks, leans). Multi-centennial ring-width chronologies at Fort Ross (1569−2023) and Gualala (1397−2023) promote continued study with incomplete crossdating limiting utilization of some series. Growth pulses (reductions, releases) and TRD dispersed across the record reflect dynamic environments that obfuscate detection of earthquake signals. The 1906 earthquake did not leave strong signatures on most trees, and when it did, within-tree response varied from normal presentation to discoloration, TRD, and missing rings. Synchrony of indicators at both locations identified 1678−1680 (6 of 15 trees) and 1698−1700 (8 of 16 trees) as the strongest disturbances among dated rings in the time range of the penultimate earthquake, peaking at 1698 (15.7 % of possible growth and anatomical indicators), but the triggering mechanisms for these events are unknown.

California↗
USGS2025

Bayesian ETAS modeling for the Pacific Northwest: Uncovering effects of tectonic regimes, regional differences, and swarms on aftershock parameters

The Pacific Northwest (PNW) of North America has high seismic hazard due to numerous earthquake sources under populated areas. It hosts several tectonic regimes and subregional seismic zones that are hypothesized to have different patterns of earthquake and aftershock occurrence. It is also predisposed to earthquake swarms, which can complicate the statistical modeling of these patterns. We present the first statistical seismicity model of the PNW catalog using the epidemic‐type aftershock sequence (ETAS) framework. We develop a Bayesian inference procedure that provides a stable estimation of both ETAS parameters and their uncertainties for different sets of PNW earthquakes, even those with very sparse catalogs. The Bayesian approach allows us to investigate how parameter estimates change between the intraslab and crustal tectonic regimes, the northern and southern PNW, and when swarms are included and excluded from the catalog. We also utilize our Bayesian framework to calculate parameter estimates under different prior beliefs about PNW seismicity, as well as to propagate catalog measurement errors into ETAS parameter estimates. We discuss the implications of parameter differences across the region for aftershock forecasting for the PNW.

Pacific Northwest↗
USGS2024

Uncertainty and spatial correlation in station measurements for mb magnitude estimation

The body‐wave magnitude (⁠⁠) is a long‐standing network‐averaged, amplitude‐based magnitude used to estimate the magnitude of seismic sources from teleseismic observations. The U.S. Geological Survey National Earthquake Information Center (NEIC) relies on in its global real‐time earthquake monitoring mission. Although waveform modeling‐based moment magnitudes are the modern standard to characterize earthquake size, is important because (1) in many cases, waveform modeling is not possible (e.g., low signal‐to‐noise events), (2) is applicable over a broad range of magnitudes, ∼M 4–7, and (3) there is a many decades‐long history of estimating magnitudes. We use the NEIC Preliminary Determination of Epicenters earthquake catalog to investigate the uncertainty in NEIC station measurements. We show that measurements are spatially correlated, which can bias event ⁠, and we describe an empirical relation between this spatial correlation and station‐to‐station distance. We further describe an approach to mitigate bias from the spatial correlation. Accounting for the spatial covariance of observations can change the event from −0.15 to 0.07 units (10th to 90th percentile) for smaller events (⁠⁠). These smaller events have the largest standard deviations ranging from 0.05 to 0.15 units (10th to 90th percentile).

The Seismic Record↗
USGS2025

A soil velocity model for improved ground motion simulations in the U. S. Pacific Northwest

Near-surface seismic velocity structure may significantly impact the intensity, duration, and frequency content of ground shaking during an earthquake. In this study, we compile 649 shear wave velocity (Vs) profiles throughout the U.S. Pacific Northwest and southern British Columbia (PNW) and use these measured profiles to develop a representative soil velocity model for four major Holocene soil provinces: Puget Lowlands, Willamette Valley, fill and alluvium, and `other' soils. The resulting soil velocity model shows good agreement to measured data for a wide range of site conditions, with variability between different geologic domains reflecting fundamental differences in depositional environments. We then show that using this regional soil velocity model in simulations of the 2001 M6.8 Nisqually, Washington earthquake improves the fit to observed high-frequency (≥ 0.5 Hz) ground motions in the Puget Sound region compared to simulations that do not incorporate shallow (≤ 200 m) seismic velocity structure. Overall, this work shows that incorporating localized soil velocity profiles into seismic velocity models is important for accurately estimating high-frequency ground motion and regional seismic hazard in earthquake simulations. Future earthquake simulations and hazard studies in the PNW could incorporate these soil velocity profiles to capture the region's distinct site response characteristics.

Washington↗
USGS2026

Regreening, restoring, and reconnecting a southwestern wetland ecosystem – the Zeedyk wetland

Alluvial wetland ecosystems are vital as biodiversity hotspots but are increasingly threatened by anthropogenic stressors and drought. These pressures are especially acute in arid and semi-arid regions, where eco-hydrologic connectivity is fragile and recovery is slow. This study quantifies the efficacy of nature-based solutions, particularly the ‘Zeedyk approach,’ which employs low-tech Natural Infrastructure in Dryland Streams (NIDS)—including rock detention structures—to slow surface water, raise groundwater tables, and restore wetland function at a spring-fed wetland in Cebolla Canyon, New Mexico, U.S.A. Our results depict a Restoration Feedback Loop that captures stages of change from a healthy wetland in 1935, altered by 20th-century agriculture and grazing, to the re-establishment of the historical flow regime by 2024 documented through an 89-year archive of aerial imagery (1935–2024). By the end of our study period, the Spring-Fed Wetland had expanded by roughly 229% of the original 1935 area, to 4.13 ha. Using 40 years of satellite data, we assess changes in vegetation and hydrology with remote sensing indices. Spatial and temporal analyses reveal significant increases in vegetation greenness and wetness, particularly in an Expanded Wetland subregion, which exhibited ∼3.5x higher wetness and ∼1.5x higher greenness trends compared to adjacent areas. Monthly metrics highlight seasonal variability, with increases in greenness linked to monsoonal rainfall and lateral water redistribution, indicating that restoration impacts extend beyond the primary wetland. This study demonstrates the utility of cloud-based platforms like Google Earth Engine and USGS EarthExplorer for long-term monitoring of wetland restoration, while quantifying the efficacy of the ‘Zeedyk approach’ and demonstrating its potential as a scalable method to restore and conserve wetland meadows in other arid and semi-arid landscapes.

New Mexico↗
USGS2026

Testing characteristic magnitude distributions in modern PSHA models

The characteristic magnitude distribution hypothesis predicts a higher rate of large earthquakes than a Gutenberg–Richter extrapolation of the small‐earthquake rate would imply. Characteristic magnitude distributions have been commonly applied to faults in probabilistic seismic hazard analysis (PSHA), and in modern models they can emerge from the way short‐term seismicity constraints are combined with long‐term geologic and geodetic constraints. We test the characteristic magnitude distribution hypothesis by comparing the fault‐based magnitude distributions from the 2023 update to the National Seismic Hazard Model (NSHM23) in the Western United States with observed seismicity over the past 93 yr. We find that observed magnitude distributions fall outside the model‐predicted confidence bounds in regions where NSHM23 produces characteristic magnitude distributions: in these regions, the model predicts higher rates of large earthquakes than are observed. An analysis of the earlier California model (Uniform California Earthquake Rupture Forecast, version 3) also reveals discrepancies between the modeled and observed magnitude distributions. In addition, we find that observed magnitude distributions near modeled faults are not significantly different from those in background regions. These results challenge the prevalence of characteristic magnitude distributions in fault‐based seismic hazard models and call for a reassessment of how disparate data sets are integrated in PSHA.

western United States↗
USGS2025

Estimated average annualized tsunami losses for the United States

Tsunami hazards are substantial threats to coastal communities across the United States (U.S.) and its territories. U.S. states and territories collaborate through the National Tsunami Hazard Mitigation Program (NTHMP) to develop their own tsunami-hazard information for outreach and evacuation planning. An effort to curate this tsunami-hazard information to support comprehensive risk analysis at the national level has not yet been completed. In support of this effort, the Federal Emergency Management Agency (FEMA) collaborated with the NTHMP, the National Oceanic and Atmospheric Administration (NOAA) and the U.S. Geological Survey (USGS) starting in 2023. This collaboration included the collection and analysis of existing tsunami hazard data and methods in the U.S. Tsunami subject matter experts identified and selected scientifically defensible methods for estimating the risks to buildings and populations in coastal communities. These efforts may support decision making regarding resilience policies, priorities, strategies and funding levels. Tsunamis can be triggered by earthquakes, subaerial or submarine landslides, volcanic eruptions, glacial calving, near-earth objects, weather or other events. These events can cause severe destruction, injuries, and loss of life due to powerful currents and flooding. Tsunamis pose a substantial threat to the western United States and all U.S. territories, as described below. ■ Hawaii is threatened by distant tsunamis due to its central location in the Pacific Ocean basin and has a history of local events. ■ Alaska, particularly the Aleutian Islands, faces local tsunami threats due to proximity to the Alaska-Aleutian Subduction Zone, as well as distant tsunamis from around the Pacific Ocean basin. ■ The western coast of the U.S. is threatened by distant tsunamis from around the Pacific Ocean basin and local source tsunamis from earthquakes generated within the Cascadia Subduction Zone in the Pacific Northwest. ■ American Samoa faces local tsunami threats from earthquakes generated in the nearby Tonga Trench, as well as distant tsunami threats. ■ Guam and the Commonwealth of the Northern Mariana Islands are threatened by local tsunamis from the nearby Mariana Subduction Zone, as well as distant sources from around the Pacific Ocean Basin. ■ Puerto Rico and the United States Virgin Islands are threatened by multiple local and distant tsunami sources, such as the Puerto Rico Trench (PRT), given their location in the complex seismic region of the Caribbean Sea. Several historical events stand out because of their catastrophic impacts. ■ In the Pacific Northwest, the 1700 Cascadia earthquake caused a tsunami that affected coastal Native American communities, though the extent of the damage is not fully documented (Ludwin, et al., 2005). ■ In Puerto Rico, the 1918 earthquake triggered a tsunami that caused $77 million in damage in 2022 dollars and 116 fatalities, primarily along the western coast (Coffman et al., 1982). ■ The 1946 Aleutian Islands earthquake triggered a massive tsunami that devastated Hilo, Hawaii, killing 158 people and resulting in approximately $375 million in damage (adjusted to 2022 dollars) (Fisher et al., 2023). ■ The 1964 Alaska earthquake (M 9.2) generated tsunamis that caused severe destruction in some communities across Alaska, Oregon, and California. This disaster led to a total of 124 fatalities and approximately $2.9 billion in property damage (adjusted to 2022 dollars) (Brocher et al., 2014) (Alaska Science Center, 2024). ■ In American Samoa, a tsunami generated by the 2009 Samoa earthquake (Mw 8.1) caused widespread devastation, resulting in 34 confirmed fatalities (Apatu et al., 2013) and economic losses exceeding $160 million (adjusted to 2022 dollars) (DHS, 2011). More recent events, including the 2010 Chile earthquake, the 2011 Japan earthquake, and the 2022 Tonga volcanic eruption, resulted in millions of dollars in damage to numerous ports and harbors in the U.S. South Pacific territories, Hawaii, and along the west coast of the U.S. (Lynett, et al., 2022) (Wilson, et al., 2013). Since these events, the expansion of the built environment in lowlying areas along the coast has increased the exposure of buildings and people, thereby further escalating community risk from tsunamis. This report provides a comprehensive national assessment of earthquake-generated tsunami risk. It does not include impacts from tsunamis generated by landslides, volcanic eruptions, glacial calving, near-earth objects, weather, or other events. This study is based on the best available hazard data from the U.S. Pacific Coast (California, Oregon and Washington), Alaska, Hawaii, U.S. Pacific Territories (American Samoa, Guam and Commonwealth of the Northern Mariana Islands) and Caribbean Territories (Puerto Rico and United States Virgin Islands). Tsunami risks associated with states along the East Coast, Gulf Coast, and Great Lakes are not included in this study because Hazus 6.1 software (FEMA 2024a) does not currently include the ability to analyze tsunami risk in those states. Once modeling capabilities and tsunami hazard data become available for additional states, FEMA may incorporate these data into future editions of this study.

Alaska, California, Hawaii Oregon, Washington↗
USGS2025

Probing lower-crustal fault properties with frequency-dependent tidal tremor triggering

The way seismicity responds to periodic stress perturbations offers crucial insights into the processes that can trigger an earthquake. Laboratory and theoretical analyses have shown that the period of imposed forcing and source properties affect the sensitivity to triggering, but frequency-dependent triggering of tectonic faults is poorly understood. The rate of low-frequency earthquakes (LFEs) near Parkfield, California has been found to be strongly correlated with solid earth tides. Tidal forcing acts over multiple frequencies, and the sensitivity to tidal triggering of LFEs therefore provides a unique opportunity to probe the physics of earthquake triggering and underlying fault properties. Here, we find that the response of LFEs to solid earth tides at diurnal and semi-diurnal frequencies is highly variable but spatially coherent along the San Andreas Fault. Using rate-state friction modeling, we find that the variation of the amplitude of tidal modulation is mainly affected by the spatial variation of the background effective normal stress, whereas the spatially varied tidal modulation at diurnal and semi-diurnal frequencies is mainly affected by the fault frictional property. The spatial variations of the LFE response reveal a heterogeneous lower-crustal geologic structure and complex physical faulting processes below the rupture zone of eventual great earthquakes.

California↗