USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth System Science Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources
USGS1993

U.S.-Soviet Collaborative Geological and Geophysical Survey of the Mid-Atlantic Ridge near 31 degrees N, the Petrov Fracture Zone

Introduction In February 1989, the first formal U.S.-Soviet joint marine geologic-geophysical study in 10 years was undertaken along the Mid-Atlantic Ridge near 31°N on the 12th Cruise of the RN Akademik Boris Petrov of the Vernadsky Institute of Geochemistry (USSR Academy of Sciences, Moscow). This survey was initiated as part of the U.S.S.R.-U.S. cooperative research project "Mid-Atlantic Ridge Crest Processes" within the framework of the Soviet-U.S. bilateral Ocean Studies Agreement (Ostenso, 1989). U.S. scientists from the U.S. Geological Survey, University of Houston, and Woods Hole Oceanographic Institution participated in this program with Soviet scientists from the Vernadsky Institute of Geochemistry, Institute of Geology, and Schmidt Institute of Physics of the Earth, all institutes of the USSR Academy of Sciences in Moscow (Appendix 1 ). The ship departed from Rotterdam, Nederlands on February 2, 1989 and docked in Bridgetown, Barbados on February 28, 1989. A log of the ship's schedule during this cruise is given in Appendix 2. This study involved a limited multibeam-bathymetric, gravity, magnetic, and seismic- reflection survey. and dredging program of a short-offset transform fault named the Petrov Fracture Zone near 31 °N, located just north of the Atlantis Fracture Zone on the Mid Atlantic Ridge. A site survey at King's Trough in the northeast Atlantic for a MIR submersible program in June 1989 was originally planned as part of this program, but bad weather and the resultant poor quality geophysical data forced this work to be terminated after only one day. Nearly 6000 km of geophysical profile data and 13 dredge stations were completed during this cruise. A description of the geophysical systems aboard the RN Petrov is given in Appendices 3 and 4. All geophysical data were recorded on magnetic tape in data formats described in Appendix 5. Dredge locales and description summaries only are presented in Appendix 6. Detailed descriptions of dredge samples will be presented elsewhere. Operational plan for the studies on this cruise was developed as a cooperative effort between U.S. and Soviet scientists, who established jointly the basic objectives of the study. The U.S. scientists were given the responsibility for developing the detailed survey and dredge sampling plans. Dredge operations and basic geophysical systems operations were the responsibility of the Soviet personnel.

Open-File Report↗
USGS2016

Radiocarbon constraints imply reduced carbon uptake by soils during the 21st century

Soil is the largest terrestrial carbon reservoir and may influence the sign and magnitude of carbon cycle-climate feedbacks. Many Earth system models (ESMs) estimate a significant soil carbon sink by 2100, yet the underlying carbon dynamics determining this response have not been systematically tested against observations. We used 14C data from 157 globally distributed soil profiles sampled to 1 m depth to show that ESMs underestimated the mean age of soil carbon by more than six-fold (430±50 years vs. 3100±1800 years). Consequently, ESMs overestimated the carbon sequestration potential of soils by nearly two-fold (40±27%). These biases suggest that ESMs must better represent carbon stabilization processes and the turnover time of slow and passive reservoirs when simulating future atmospheric CO2 dynamics.

Science↗
USGS2019

Lidar-based approaches for estimating solar insolation in heavily forested streams

Methods to quantify solar insolation in riparian landscapes are needed due to the importance of stream temperature to aquatic biota. We have tested three lidar predictors using two approaches developed for other applications of estimating solar insolation from airborne lidar using field data collected in a heavily forested narrow stream in western Oregon, USA. We show that a raster methodology based on the light penetration index (LPI) and a synthetic hemispherical photograph approach both accurately predict solar insolation, explaining more than 73 % of the variability observed in pyranometers placed in the stream channel. We apply the LPI-based model to predict solar insolation for an entire riparian system and demonstrate that no field-based calibration is necessary to produce an unbiased prediction of solar insolation using airborne lidar alone.

Oregon↗
USGS1994

Deglaciation, lake levels, and meltwater discharge in the Lake Michigan basin

The deglacial history of the Lake Michigan basin, including discharge and routing of meltwater, is complex because of the interaction among (1) glacial retreats and re-advances in the basin (2) the timing of occupation and the isostatic adjustment of lake outlets and (3) the depositional and erosional processes that left evidence of past lake levels. In the southern part of the basin, a restricted area little affected by differential isostasy, new studies of onshore and offshore areas allow refinement of a lake-level history that has evolved over 100 years. Important new data include the recognition of two periods of influx of meltwater from Lake Agassiz into the basin and details of the highstands gleaned from sedimentological evidence. Major disagreements still persist concerning the exact timing and lake-level changes associated with the Algonquin phase, approximately 11,000 BP. A wide variety of independent data suggests that the Lake Michigan Lobe was thin, unstable, and subject to rapid advances and retreats. Consequently, lake-level changes were commonly abrupt and stable shorelines were short-lived. The long-held beliefs that the southern part of the basin was stable and separated from deformed northern areas by a hinge-line discontinuity are becoming difficult to maintain. Numerical modeling of the ice-earth system and empirical modeling of shoreline deformation are both consistent with observed shoreline tilting in the north and with the amount and pattern of modern deformation shown by lake-level gauges. New studies of subaerial lacustrine features suggest the presence of deformed shorelines higher than those originally ascribed to the supposed horizontal Glenwood level. Finally, the Lake Michigan region as a whole appears to behave in a similar manner to other areas, both local (other Great Lakes) and regional (U.S. east coast), that have experienced major isostatic changes. Detailed sedimentological and dating studies of field sites and additional development of geophysical models offer hope for reconciling the field data with our understanding of earth rheology. ?? 1995.

Lake Michigan Basin↗
USGS2022

Landsat data ecosystem case study: Actor perceptions of the use and value of landsat

It is well-known that Earth observation (EO) data plays a critical role in scientific understanding about the global environment. There is also growing support for the use of EO data to provide context-specific insights, with significant implications for their use in decision support systems. Technological development over recent years, including cloud computing infrastructure, machine learning techniques, and rapid expansion of the velocity, volume, and variety of space-borne data sources, offer huge potential to provide solutions to the myriad environmental problems facing society and the planet. The USGS/NASA Landsat Program, the longest continuously gathered source of land surface data, has played a central role in our understanding of environmental change, particularly for its contribution of longitudinal products that offer greater context for present research and decision support activities. The challenge facing the Landsat and EO data community, however, now lies in moving beyond context-specific knowledge generation to translating such knowledge into tangible value for society. Drawing from an open data ecosystem framework and qualitative social science methods, we map the Landsat data ecosystem (LDE) and the relationships linking multiple actors responsible for processing, indexing, analyzing, synthesizing, and translating raw Landsat data into information that is useful, useable, and used by end users in particular social-environmental contexts. Both the role of Big Data and associated technologies are discussed as they relate to the ultimate use of Landsat-derived information products to guide decision-making, and key data ecosystem characteristics that shape the likelihood of these products’ use are highlighted.

Frontiers in Environmental Science↗
USGS1995

Osmium-187 enrichment in some plumes: Evidence for core-mantle interaction?

Calculations with data for asteroidal cores indicate that Earth's outer core may have a rhenium/osmium ratio at least 20 percent greater than that of the chondritic upper mantle, potentially leading to an outer core with an osmium-187/osmium-188 ratio at least 8 percent greater than that of chondrites. Because of the much greater abundance of osmium in the outer core relative to the mantle, even a small addition of metal to a plume ascending from the D" layer would transfer the enriched isotopic signature to the mixture. Sources of certain plume-derived systems seem to have osmium-187/osmium-188 ratios 5 to 20 percent greater than that for chondrites, consistent with the ascent of a plume from the core-mantle boundary.

Science↗
USGS1994

Airborne remote sensing for geology and the environment; present and future

In 1988, a group of leading experts from government, academia, and industry attended a workshop on airborne remote sensing sponsored by the U.S. Geological Survey (USGS) and hosted by the Branch of Geophysics. The purpose of the workshop was to examine the scientific rationale for airborne remote sensing in support of government earth science in the next decade. This report has arranged the six resulting working-group reports under two main headings: (1) Geologic Remote Sensing, for the reports on geologic mapping, mineral resources, and fossil fuels and geothermal resources; and (2) Environmental Remote Sensing, for the reports on environmental geology, geologic hazards, and water resources. The intent of the workshop was to provide an evaluation of demonstrated capabilities, their direct extensions, and possible future applications, and this was the organizational format used for the geologic remote sensing reports. The working groups in environmental remote sensing chose to present their reports in a somewhat modified version of this format. A final section examines future advances and limitations in the field. There is a large, complex, and often bewildering array of remote sensing data available. Early remote sensing studies were based on data collected from airborne platforms. Much of that technology was later extended to satellites. The original 80-m-resolution Landsat Multispectral Scanner System (MSS) has now been largely superseded by the 30-m-resolution Thematic Mapper (TM) system that has additional spectral channels. The French satellite SPOT provides higher spatial resolution for channels equivalent to MSS. Low-resolution (1 km) data are available from the National Oceanographic and Atmospheric Administration's AVHRR system, which acquires reflectance and day and night thermal data daily. Several experimental satellites have acquired limited data, and there are extensive plans for future satellites including those of Japan (JERS), Europe (ESA), Canada (Radarsat), and the United States (EOS). There are currently two national airborne remote sensing programs (photography, radar) with data archived at the USGS' EROS Data Center. Airborne broadband multispectral data (comparable to Landsat MSS and TM but involving several more channels) for limited geographic areas also are available for digital processing and analysis. Narrow-band imaging spectrometer data are available for some NASA experiment sites and can be acquired for other locations commercially. Remote sensing data and derivative images, because of the uniform spatial coverage, availability at different resolutions, and digital format, are becoming important data sets for geographic information system (GIS) analyses. Examples range from overlaying digitized geologic maps on remote sensing images and draping these over topography, to maps of mineral distribution and inferred abundance. A large variety of remote sensing data sets are available, with costs ranging from a few dollars per square mile for satellite digital data to a few hundred dollars per square mile for airborne imaging spectrometry. Computer processing and analysis costs routinely surpass these expenses because of the equipment and expertise necessary for information extraction and interpretation. Effective use requires both an understanding of the current methodology and an appreciation of the most cost-effective solution.

Bulletin↗
USGS1994

Geologic studies in Alaska by the U.S. Geological Survey, 1993

This collection of 19 papers continues the annual series of U.S. Geological Survey reports on geologic investigations in Alaska. Contributions include 14 Articles and 5 shorter Geologic Notes that report results from all corners of the State. USGS activities in Alaska cover a broad spectrum of earth science topics, including the environment, hazards, resources, and geologic framework studies. Three articles focus on the environmental geochemistry of parts of south-central, west-central, and southwestern Alaska. An article on methane released from permafrost near Fairbanks and a note on paleowind direction indicators on the Arctic coastal plain contribute to ongoing climate and paleoclimate investigations. Landslide hazards in the Talkeetna Mountains and Wrangell-St. Elias National Park are discussed in two notes. Possible active fault traces near Alaska's main population center are described in an article on the Castle Mountain fault. An article on Aniakchak volcano presents evidence for a previously unrecognized catastrophic flooding event. Resources and resource assessment on gold, base metals, and coal are discussed in several articles and a note. Geologic framework studies cover tectonics, paleontology, stratigraphy, and metamorphic petrology. One contribution involves field methods; it evaluates the relative accuracy of global positioning systems and topographic map-based methods for deriving location data for field stations. Two bibliographies at the end of the volume list reports about Alaska in USGS publications released in 1993 and reports about Alaska by USGS authors in non-USGS publications in 1993.

Alaska↗
USGS2011

Building transparent data access for ocean observatories: Coordination of U.S. IOOS DMAC with NSF's OOI Cyberinfrastructure

The NOAA-led U.S. Integrated Ocean Observing System (IOOS) and the National Science Foundation's Ocean Observatories Initiative (OOI) have been collaborating since 2007 on advanced tools and technologies that ensure open access to ocean observations and models. Initial collaboration focused on serving ocean data via cloud computing-a key component of the OOI cyberinfrastructure (CI) architecture. As the OOI transitioned from planning to execution in the Fall of 2009, an OOI/IOOS team developed a customer-based "use case" to align more closely with the emerging objectives of OOI-CI team's first software release scheduled for Summer 2011 and provide a quantitative capacity for stress-testing these tools and protocols. A requirements process was initiated with coastal modelers, focusing on improved workflows to deliver ocean observation data. Accomplishments to date include the documentation and assessment of scientific workflows for two "early adopter" modeling teams from IOOS Regional partners (Rutgers-the State University of New Jersey and University of Hawaii's School of Ocean and Earth Science and Technology) to enable full understanding of data sources and needs; generation of all-inclusive lists of the data sets required and those obtainable through IOOS; a more complete understanding of areas where IOOS can expand data access capabilities to better serve the needs of the modeling community; and development of "data set agents" (software) to facilitate data acquisition from numerous data providers and conversions of the data format to the OOI-CI canonical form. ?? 2011 MTS.

Conference Paper↗
USGS2019

Debris-flow monitoring and warning: Review and examples

Debris flows represent one of the most dangerous types of mass movements, because of their high velocities, large impact forces and long runout distances. This review describes the available debris-flow monitoring techniques and proposes recommendations to inform the design of future monitoring and warning/alarm systems. The selection and application of these techniques is highly dependent on site and hazard characterization, which is illustrated through detailed descriptions of nine monitoring sites: five in Europe, three in Asia and one in the USA. Most of these monitored catchments cover less than ∼10 km 2 and are topographically rugged with Melton Indices greater than 0.5. Hourly rainfall intensities between 5 and 15 mm/h are sufficient to trigger debris flows at many of the sites, and observed debris-flow volumes range from a few hundred up to almost one million cubic meters. The sensors found in these monitoring systems can be separated into two classes: a class measuring the initiation mechanisms, and another class measuring the flow dynamics. The first class principally includes rain gauges, but also contains of soil moisture and pore-water pressure sensors. The second class involves a large variety of sensors focusing on flow stage or ground vibrations and commonly includes video cameras to validate and aid in the data interpretation. Given the sporadic nature of debris flows, an essential characteristic of the monitoring systems is the differentiation between a continuous mode that samples at low frequency (“non-event mode”) and another mode that records the measurements at high frequency (“event mode”). The event detection algorithm, used to switch into the “event mode” depends on a threshold that is typically based on rainfall or ground vibration. Identifying the correct definition of these thresholds is a fundamental task not only for monitoring purposes, but also for the implementation of warning and alarm systems.

Earth-Science Reviews↗
USGS1986

Management of the life and death of an earth-science database: some examples from geotherm

Productive earth-science databases require managers who are familiar with and skilled at using available software developed specifically for database management. There also should be a primary user with a clearly understood mission. The geologic phenomenon addressed by the database must be sufficiently understood, and adequate appropriate data must be available to construct a useful database. The database manager, in concert with the primary user, must ensure that data of adequate quality are available in the database, as well as prepare for mechanisms of releasing the data when the database is terminated. The primary user needs to be held accountable along with the database manager to ensure that a useful database will be created. Quality of data and maintenance of database relevancy to the user's mission are important issues during the database's lifetime. Products prepared at termination may be used more than the operational database and thus are of critical importance. These concepts are based, in part, on both the shortcomings and successes of GEOTHERM, a comprehensive system of databases and software used to store, locate, and evaluate the geology, geochemistry, and hydrology of geothermal systems. ?? 1986.

Computers & Geosciences↗
USGS2023

Hydrologic compartmentalization and analytic-element groundwater-flow simulations for a draining mine tunnel

Draining mine tunnels contribute contaminants to groundwater and surface water, but remediation strategies may be hindered as hydrogeologic characterization and modeling of these heterogeneous features generally relies on sparse data sets. The Captain Jack mine site in Colorado, USA, presents a unique data set allowing for temporal evaluation of groundwater connectivity in the vicinity of an abandoned mine, where a hydraulic bulkhead is impounding water within the mine workings. This study applied statistical analysis of system pressure responses to bulkheading and used an analytic-element modeling approach to characterize heterogeneity and groundwater flow. Groundwater-level elevation data collected over a period of 4 years, both prior to and after bulkheading, indicate that the mine workings act as a sink to the local groundwater system. Despite groundwater flow being generally oriented towards the mine workings, there are also large vertical and horizontal hydraulic gradients which persist through time. Although the groundwater system is highly compartmentalized, statistical analysis using Kendall’s Tau indicates correlations between hydraulic head changes in the mine workings and several wells completed in crystalline bedrock, indicating the influence of fracture flow. An analytic-element model was parameterized to account for uncertainty in hydraulic conductivity, recharge, and discharge. Model results reproduced the range of observed hydraulic heads in the mine workings and adjacent igneous dikes but failed to closely simulate hydraulic heads in several wells located distal from the mine workings in granitic bedrock. The modeling approach shows potential promise, however, for conducting preliminary modeling to guide data collection at other similar mine sites.

Colorado↗
USGS2003

To the National Map and beyond

Scientific understanding, technology, and social, economic, and environmental conditions have driven a rapidly changing demand for geographic information, both digital and analog. For more than a decade, the U.S. Geological Survey (USGS) has been developing innovative partnerships with other government agencies and private industry to produce and distribute geographic information efficiently; increase activities in remote sensing to ensure ongoing monitoring of the land surface; and develop new understanding of the causes and consequences of land surface change. These activities are now contributing to a more robust set of geographic information called The National Map (TNM). The National Map is designed to provide an up-to-date, seamless, horizontally and vertically integrated set of basic digital geographic data, a frequent monitoring of changes on the land surface, and an understanding of the condition of the Earth's surface and many of the processes that shape it. The USGS has reorganized its National Mapping Program into three programs to address the continuum of scientific activities-describing (mapping), monitoring, understanding, modeling, and predicting. The Cooperative Topographic Mapping Program focuses primarily on the mapping and revision aspects of TNM. The National Map also includes results from the Land Remote Sensing and Geographic Analysis and Monitoring Programs that provide continual updates, new insights, and analytical tools. The National Map is valuable as a framework for current research, management, and operational activities. It also provides a critical framework for the development of distributed, spatially enabled decision support systems.

Cartography and Geographic Information Science↗
USGS2022

Biology: Integrating core to essential variables (Bio-ICE) task team report for marine mammals

Marine mammals are wide-ranging, relatively long-lived organisms that play a crucial role in maintaining healthy ocean ecosystems. Often referred to as ecosystem engineers and sentinel species in marine ecosystems, these charismatic megafauna feed at a variety of trophic levels, affecting food web dynamics and cycling of chemicals and nutrients in the water column as well as in benthic habitats, both nearshore and in the deep ocean. An understanding of their abundance and distribution is an essential starting point for evaluating their role in ocean ecosystems. Accordingly, marine mammals have been included among key variables to monitor in ocean observing systems, from core variables for the U.S. Integrated Ocean Observing System (IOOS) to an Essential Ocean Variable (EOV) for the Global Ocean Observing System (GOOS). They also contribute to several Essential Biodiversity Variables (EBVs) for the Group on Earth Observations Biodiversity Observation Network (GEO BON). Further, evaluation of the health of marine mammal populations will help deliver societal benefits by contributing to the UN Decade of Ocean Science for Sustainable Development; informing reporting activities such as the World Ocean Assessment; and supporting achievement of Sustainable Development Goal 14, the post-2020 framework for the Convention for Biological Diversity, and a new treaty for conservation and sustainable use of marine biodiversity beyond national jurisdiction. In the U.S., the National Marine Fisheries Service (NMFS) and the U.S. Fish and Wildlife Service (FWS) are required to produce stock assessments for marine mammals under the Marine Mammal Protection Act (MMPA, 16 U.S.C. §1371 et seq.). Stock assessment analyses require accurate, up to-date information on abundance and distribution to inform appropriate management and/or conservation measures. Despite the availability of information on abundance and distribution within the stock assessment reports, availability and accessibility of the underlying data to the broader ocean observing community and contribution to EOVs remain inconsistent.

Report↗
USGS2016

Effect of phytoremediation on concentrations of benzene, toluene, naphthalene, and dissolved oxygen in groundwater at a former manufactured gas plant site, Charleston, South Carolina, USA, 1998–2014

Concentrations of benzene, toluene, naphthalene, and dissolved oxygen in groundwater at a former manufactured gas plant site near Charleston, South Carolina, USA, have been monitored since the installation of a phytoremediation system of hybrid poplar trees in 1998. Between 2000 and 2014, the concentrations of benzene, toluene, and naphthalene (BT&N) in groundwater in the planted area have decreased. For example, in the monitoring well containing the highest concentrations of BT&N, benzene concentrations decreased from 10,200 µg/L to less than 4000 µg/L, toluene concentrations decreased from 2420 µg/L to less than 20 µg/L, and naphthalene concentrations decreased from 6840 µg/L to less than 3000 µg/L. Concentrations of BT&N in groundwater in all wells were observed to be lower during the summer months relative to the winter months of a particular year during the first few years after installing the phytoremediation system, most likely due to increased transpiration and contaminant uptake by the hybrid poplar trees during the warm summer months; this pathway of uptake by trees was confirmed by the detection of benzene, toluene, and naphthalene in trees during sampling events in 2002, and later in the study in 2012. These data suggest that the phytoremediation system affects the groundwater contaminants on a seasonal basis and, over multiple years, has resulted in a cumulative decrease in dissolved-phase contaminant concentrations in groundwater. The removal of dissolved organic contaminants from the aquifer has resulted in a lower demand on dissolved oxygen supplied by recharge and, as a result, the redox status of the groundwater has changed from anoxic to oxic conditions. This study provides much needed information for water managers and other scientists on the viability of the long-term effectiveness of phytoremediation in decreasing groundwater contaminants and increasing dissolved oxygen at sites contaminated by benzene, toluene, and naphthalene.

South Carolina↗
USGS2014

Landsat TM and ETM+ thermal band calibration

Landsat-5 has been imaging the Earth since March 1984, and Landsat-7 was added to the series of Landsat instruments in April 1999. The Landsat Project Science Office and the Landsat-7 Image Assessment System have been monitoring the on-board calibration of Landsat-7 since launch. Additionally, two separate university teams have been evaluating the on-board thermal calibration of Landsat-7 through ground-based measurements since launch. Although not monitored as closely over its lifetime, a new effort is currently being made to validate the calibration of Landsat-5. Two university teams are beginning to collect ground truth under Landsat-5, along with using other vicarious calibration methods to go back into the archive to validate the history of the calibration of Landsat-5. This paper considers the calibration efforts for the thermal band, band 6, of both the Landsat-5 and Landsat-7 instruments. Though stable since launch, Landsat-7 had an initial calibration error of about 3 K, and changes were made to correct for this beginning 1 October 2000 for data processed with the National Landsat Archive Production System (NLAPS) and beginning 20 December 2000 for data processed with the Landsat Product Generation System (LPGS). Recent results from Landsat-5 vicarious calibration efforts show an offset of –0.7 K over the lifetime of the instrument. This suggests that historical calibration efforts may have been detecting errors in processing systems rather than changes in the instrument. A correction to the Landsat-5 processing has not yet been implemented but will be in the near future.

Canadian Journal of Remote Sensing↗
USGS2017

The importance of parameterization when simulating the hydrologic response of vegetative land-cover change

Computer models of hydrologic systems are frequently used to investigate the hydrologic response of land-cover change. If the modeling results are used to inform resource-management decisions, then providing robust estimates of uncertainty in the simulated response is an important consideration. Here we examine the importance of parameterization, a necessarily subjective process, on uncertainty estimates of the simulated hydrologic response of land-cover change. Specifically, we applied the soil water assessment tool (SWAT) model to a 1.4 km 2 watershed in southern Texas to investigate the simulated hydrologic response of brush management (the mechanical removal of woody plants), a discrete land-cover change. The watershed was instrumented before and after brush-management activities were undertaken, and estimates of precipitation, streamflow, and evapotranspiration (ET) are available; these data were used to condition and verify the model. The role of parameterization in brush-management simulation was evaluated by constructing two models, one with 12 adjustable parameters (reduced parameterization) and one with 1305 adjustable parameters (full parameterization). Both models were subjected to global sensitivity analysis as well as Monte Carlo and generalized likelihood uncertainty estimation (GLUE) conditioning to identify important model inputs and to estimate uncertainty in several quantities of interest related to brush management. Many realizations from both parameterizations were identified as behavioral in that they reproduce daily mean streamflow acceptably well according to Nash–Sutcliffe model efficiency coefficient, percent bias, and coefficient of determination. However, the total volumetric ET difference resulting from simulated brush management remains highly uncertain after conditioning to daily mean streamflow, indicating that streamflow data alone are not sufficient to inform the model inputs that influence the simulated outcomes of brush management the most. Additionally, the reduced-parameterization model grossly underestimates uncertainty in the total volumetric ET difference compared to the full-parameterization model; total volumetric ET difference is a primary metric for evaluating the outcomes of brush management. The failure of the reduced-parameterization model to provide robust uncertainty estimates demonstrates the importance of parameterization when attempting to quantify uncertainty in land-cover change simulations.

Hydrology and Earth System Sciences↗
USGS2018

Technical note: False low turbidity readings from optical probes during high suspended-sediment concentrations

Turbidity, a measure of water clarity, is monitored for a variety of purposes including (1) to help determine whether water is safe to drink, (2) to establish background conditions of lakes and rivers and detect pollution caused by construction projects and stormwater discharge, (3) to study sediment transport in rivers and erosion in catchments, (4) to manage siltation of water reservoirs, and (5) to establish connections with aquatic biological properties, such as primary production and predator–prey interactions. Turbidity is typically measured with an optical probe that detects light scattered from particles in the water. Probes have defined upper limits of the range of turbidity that they can measure. The general assumption is that when turbidity exceeds this upper limit, the values of turbidity will be constant, i.e., the probe is pegged ; however, this assumption is not necessarily valid. In rivers with limited variation in the physical properties of the suspended sediment, at lower suspended-sediment concentrations, an increase in suspended-sediment concentration will cause a linear increase in turbidity. When the suspended-sediment concentration in these rivers is high, turbidity levels can exceed the upper measurement limit of an optical probe and record a constant pegged value. However, at extremely high suspended-sediment concentrations, optical turbidity probes do not necessarily stay pegged at a constant value. Data from the Colorado River in Grand Canyon, Arizona, USA, and a laboratory experiment both demonstrate that when turbidity exceeds instrument-pegged conditions, increasing suspended-sediment concentration (and thus increasing turbidity) may cause optical probes to record decreasing false turbidity values that appear to be within the valid measurement range of the probe. Therefore, under high-turbidity conditions, other surrogate measurements of turbidity (e.g., acoustic-attenuation measurements or suspended-sediment samples) are necessary to correct these low false turbidity measurements and accurately measure turbidity.

Hydrology and Earth System Sciences↗