USGS ScienceSearch

SEARCH · USGS Science

Results for “npj Natural Hazards”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

487 records · Page 17Linked to original sources

WellSTIC: A cost-effective sensor for performing point dilution tests to measure groundwater velocity in shallow aquifers

Many individual measurement points are required to characterize groundwater velocity within an aquifer. Groundwater velocity is most commonly measured using a network of >5 cm diameter monitoring wells, which, if not already present at a site, are expensive and labor-intensive to install. Drive-point piezometers—simple, cost-effective wells that can be installed by hand—are a common tool for sampling groundwater in shallow, alluvial aquifers, but most groundwater velocity measurement techniques require equipment that is too large for these narrow (usually <2 cm inside diameter) piezometers. In this technical note, we introduce a low-cost sensor and well packer system (<$90 USD) for performing point dilution tests in narrow piezometers. Field data show that the magnitude of groundwater velocity measured with this technique agrees with velocities computed from natural gradient tracer tests. Additionally, with proper calibration, these sensors can be used to continuously monitor in-well specific conductance, either during inter-well tracer tests with saline tracers or for water quality monitoring. This system is a viable tool for rapid assessment of the magnitude of groundwater velocity in shallow aquifers.

Water Resources Research

Multiple-well monitoring site adjacent to the Midway- Sunset and Buena Vista Oil Fields, Kern County, California

Groundwater quality in and around oil fields in the Southern San Joaquin Valley is of interest to many California residents that rely heavily on groundwater for domestic, commercial, and agricultural use. To help assess the effects of historical oil-field activities and natural geologic sources on groundwater near the southwest margins of the Kern County Groundwater Subbasin, a multiple-well monitoring site was installed near the administrative boundary between the Midway-Sunset and Buena Vista Oil Fields in Kern County, California. The installation of the Midway-Sunset Buena Vista multiple-well monitoring site (MSBV) supports regional analysis of the relations of oil and gas sources to groundwater quality by providing information about the geology, hydrology, geophysical properties, and water quality of the alluvial and upper Tulare aquifers in areas where groundwater data were limited. Data collected from the site included drill cuttings, whole core samples, sidewall core samples, mud-gas analysis, borehole geophysical logs, depth to water measurements, and water quality samples. Whole cores were scanned using dual energy computed tomography. Subsamples of selected cores were analyzed for density, porosity, specific retention, and bulk minerology. Thin sections of the subsamples were prepared, photographed, and examined. Two samples were analyzed using scanning electron microscope technology to examine the microporosity of diatomite laden sediment. Instrumentation installed in the wells collect hourly depth to water measurements. Analysis of the data show there is 355 feet of alluvium overlying the Tulare Formation at the well site. The contact between the two formations is an aquitard resulting in a perched aquifer in the alluvium and unconfined aquifer in the Tulare Formation. The alluvium is more heterogenous and finer grained than the Tulare Formation resulting in markedly higher porosity in the alluvium compared to the Tulare Formation. Higher specific retention observed in the alluvium is attributed to the finer grained sediment and greater abundance of reworked diatomite (as represented by opal-CT [cristobalite-tridymite]) compared to the Tulare Formation. Total dissolved solids (TDS) approached or exceeded 10,000 milligrams per liter (mg/L) in the alluvium from approximately 176 to 242 feet below land surface and at the top of the Amnicola clay at approximately 670 feet below land surface within the Tulare Formation. Elevated TDS, chloride, and boron concentrations in the alluvium and on top of the Amnicola clay likely reflect groundwater that is mixed with oil-field water. Water chemistry and modern-aged groundwater in the alluvial monitoring well (MSBV #3) are consistent with the oil-field water in the alluvium being derived from documented historical surface disposal of oil-field water upslope (northwest) of the site. Water chemistry and pre-modern groundwater age in the deeper Tulare monitoring well (MSBV #1) on top of the Amnicola clay are consistent with oil-field fluids derived from upslope natural geologic sources or old oil wells that leak in the subsurface. Shallow groundwater in the Tulare (MSBV #2) is not affected by mixing with oil-field sources.

EarthArXiv

Flood-inundation maps for the Cuyahoga River in and near Independence, Ohio, 2024

Digital flood-inundation maps for a 9.9-mile reach of the Cuyahoga River in and near Independence, Ohio, were created by the U.S. Geological Survey (USGS) in cooperation with the Northeast Ohio Regional Sewer District Board of Trustees. Water-surface profiles were computed for the stream reach by using a one-dimensional steady-state step-backwater model. The model was calibrated to the current (2024) stage-streamflow relation (rating curve 43.0) for the USGS streamgage 04208000, Cuyahoga River at Independence, Ohio. The resulting hydraulic model was then used to compute 13 water-surface profiles for water levels (flood stages) ranging from 14.00 to 26.00 feet. The flood stages range from “action stage” to above “major flood stage” as reported by the National Weather Service. The simulated water-surface profiles were then used in combination with a digital elevation model derived from light detection and ranging data to map the inundated areas associated with each flood profile. The flood-inundation maps and the supporting hydraulic model produced by this study can be used by emergency managers and local officials to assess flood mitigation strategies and to define flood hazard areas to protect life and property, to coordinate flood response activities such as evacuations and road closures, and to aid postflood recovery efforts.

Ohio

Cultural benefits knowledge and social learning in Elwha River dam removal and ecosystem decision-making

In a retrospective case study of the seminal Elwha River dam removal in Washington State, USA, we explore pathways through which ecosystem services (ES) knowledge can inform environmental decision-making. We specifically investigate how knowledge of cultural benefits linked to the Elwha River ecosystem was made available. Through interviews and historical document review we identify diverse forms of cultural benefits knowledge (i.e., how individuals or groups know the contributions of an ecosystem to their identities, experiences, and capabilities), including both knowledge in the form of practices – embodied or enacted forms of knowledge, and knowledge in the form of products – quantitative or written documentation. Recognizing and learning from the diverse forms in which benefits knowledges are conveyed can support more accurate and equitable consideration of the diverse values, well-beings, and human-nature relationships linked to ecosystems. With this case study, we illuminate pathways for meaningful consideration of multiple knowledge forms, and the plural ecosystem values they convey, with relevance for environmental decision processes in the Puget Sound and beyond.

Washington

3D viscoelastic models of slip-deficit rate along the Cascadia subduction zone

Interseismic deformation in the Pacific Northwest is constrained by the horizontal crustal velocity field derived from the Global Positioning System (GPS) in addition to vertical rates derived from GPS, leveling, and tide gauge measurements. Such measurements were folded in to deformation models of fault slip rates as part of the 2023 National Seismic Hazard Model (NSHM) update. Here I build upon one of the contributing models, the viscoelastic earthquake-cycle model of Pollitz [2022]. This model permits inclusion of effects of time-dependent viscoelastic relaxation within earthquake cycles (i.e., ‘ghost transients’) and laterally variable elastic and/or ductile material properties. I lever-age these capabilities to incorporate the Cascadia megathrust into Western U.S.-wide deformation models in which crustal fault slip rates are estimated simultaneously with slip deficit rates along the interplate boundary between the descending Juan de Fuca plate and North American plate. This effort includes construction of a margin-wide model of viscoelastic structure founded on the Slab 2.0 model and probes different models of the ductile properties of the surrounding oceanic asthenosphere, continental lower crust, and mantle asthenosphere. This results in new estimates of the distribution of slip deficit rate along the ∼ 1000 km long margin, highlights the importance of correcting for glacial-isostatic adjustment effects, and permits assessment of sensitivity of results to assumed ductile properties.

California, Oregon, Washington

Temporal and spatial changes in seismic attenuation associated with inferred fluid migration in the 2016 central Apennines earthquake sequence

Prior work suggests that high‐frequency seismic attenuation acts as a highly sensitive proxy for crustal permeability and fluid mobility in fractured media. We test the hypothesis that the fault system responsible for the 2016–2017 Amatrice–Visso–Norcia–Capitignano sequence acted as an impermeable seal, compartmentalizing pressurized fluids until dynamic rupture triggered widespread fluid diffusion. By tracking across the sequence the spatiotemporal evolution of the S ‐wave anelastic attenuation parameter, we identify large, positive low‐frequency attenuation anomalies emerging within the hanging wall following the Amatrice mainshock and strictly preceding subsequent large ruptures. Conversely, we observe weaker, negative anomalies in the footwall, anticorrelated in time with those of the hanging wall, revealing a massive asymmetry in fluid redistribution and permeability evolution across the fault system. Furthermore, aftershock migration rates reveal distinct linear alignments in a distance‐reduced time space, allowing us to explicitly track and quantify episodes of lateral and upward fluid migration. These physically consistent patterns suggest that stress‐driven fluid diffusion directly weakens adjacent fault patches, dictating the spatiotemporal migration of seismicity. We conclude that near‐real‐time monitoring of seismic attenuation may help detect fluid redistribution in active fault systems and may provide useful information for time‐dependent seismic hazard assessment.

central Apennines

Characterization and validation of tidally calibrated strains from the Alto Tiberina Near Fault Observatory Strainmeter Array (TABOO-NFO-STAR)

Six horizontal borehole tensor strainmeters (TSM1-6) installed from Fall 2021 to Spring 2022 comprise the Alto Tiberina Near Fault Observatory Strainmeter Array (STAR), providing an unprecedented opportunity to investigate seismic and aseismic deformation from hazardous high- and low-angle normal faults in Italy. Prior to use in tectonic applications, they require in-situ calibration and correction for non-tectonic signals. We tidally calibrate the instruments, characterize the calibration uncertainty, and test the results against environmental and earthquake signals originating from local to teleseismic distances. The STAR sites demonstrably deviate from assumptions common to the standard manufacturer's calibrations, including negative areal coupling at TSM3-6. While the tidally calibrated strains have ~3-56% uncertainty, the calibrated dynamic strains show interstation precision and accuracy to nanostrain levels, and static coseismic offsets in the array footprint are within uncertainty. TSM3 records a complex series of strains that may arise from dynamically triggered near-borehole fracture slip and fluid flow that does not appear to affect its sensitivity to lower strain rate deformation. Future calibration improvement may be afforded with longer stable timeseries, particularly for TSM4. Overall, our analyses demonstrate expanded geodetic capability for detecting deformation in the Alto Tiberina Near Fault Observatory.

Alto Tiberina Near Fault Observatory

No evidence for an active margin-spanning megasplay fault at the Cascadia Subduction Zone

It has been previously proposed that a megasplay fault within the Cascadia accretionary wedge, spanning from offshore Vancouver Island to Oregon, has the potential to slip during a future Cascadia subduction zone earthquake. This hypothetical fault has major implications for tsunami size and arrival times and is included in disaster-planning scenarios currently in use in the region. This hypothesis is evaluated in this study using CASIE21 deep-penetrating and U.S. Geological Survey high-resolution seismic reflection profiles. We map changes in wedge structural style and seismic character to identify the inner-outer wedge transition zone where a megasplay fault has been previously hypothesized to exist and evaluate evidence for active faulting within this zone. Our results indicate that there is not an active, through-going megasplay fault in Cascadia, but instead, the structure and activity of faulting at the inner-outer wedge transition zone is highly variable and segmented along strike, consistent with the segmentation of other physical and mechanical properties in Cascadia. Wedge sedimentation, plate dip, and subducting topography are proposed to play a major role in controlling megasplay fault development and evolution. Incorporating updated megasplay fault location, geometry, and activity into modeling of Cascadia earthquakes and tsunamis could help better constrain associated hazards.

British Columbia, Oregon, Washington

Permafrost thaw controls iron flux from wetlands and sulfide-bearing rocks to Arctic rivers and streams

Recent warming has caused widespread iron mobilization into Arctic waterbodies that degrades ecosystems and threatens natural resources. Yet, understanding where and when iron flux occurs remains limited. Here, we investigate iron loading across regional to local scales in Arctic Alaska using climate, water chemistry, and borehole data together with mapped geology and permafrost presence. We show that both anoxic microbial iron reduction and acid rock drainage from iron-sulfide oxidation mobilize iron. Iron influx is strongly associated with lowland wetlands, sulfide-rich upland bedrock, and near-surface permafrost. Acid rock drainage chemistry correlates very strongly with the depth of seasonal thaw above permafrost from the previous year, indicating a one-year lag. These findings clarify the spatial and temporal dynamics of Arctic river rusting, provide a mechanistic understanding of the phenomenon, and may allow anticipation of its occurrence and assessment of its implications for aquatic ecosystem health and subsistence resources under ongoing climate change.

Alaska

Preliminary geologic map of the Sparta East, Sparta West, and parts of the Glade Valley and Whitehead 7.5-minute quadrangles, North Carolina and Virginia, and the epicentral area of the August 9, 2020, Mw 5.1 earthquake near Sparta, North Carolina

Introduction New bedrock and surficial geologic mapping in the Sparta East, Sparta West, and parts of the Glade Valley and Whitehead 7.5-minute quadrangles, North Carolina and Virginia, investigates the geologic framework and causative mechanisms of the August 9, 2020, Mw 5.1 earthquake near Sparta, North Carolina. The mapping documents (1) the coseismic surface rupture from the 2020 earthquake and related brittle structures in the bedrock; (2) the fault contact between the western Blue Ridge and eastern Blue Ridge; (3) lithostratigraphy in the Lynchburg Group, Ashe Metamorphic Suite, and Alligator Back Metamorphic Suite; (4) the nature of the contact between the Lynchburg Group, Ashe Metamorphic Suite, and Alligator Back Metamorphic Suite; and (5) surficial deposits.

North Carolina, Virginia

Exploring the dynamic interactions between the Southern San Andreas Fault and a normal fault under the Salton Sea

We investigate the dynamic interactions between the Southern San Andreas Fault (SSAF) and a proximal normal fault (NF) beneath the Salton Sea in southern California. The NF, positioned near the SSAF terminus at Bombay Beach, exhibits 11–15 displacement events across 14 stratigraphic sequences, with a range of 0.2–1.4 m of vertical offset since ∼2–3 ka. Notably, four of these events may align temporally with SSAF earthquakes, raising questions about the possible interplay between the two faults. Utilizing dynamic rupture models, we analyze the coseismic interactions between the SSAF and NF, addressing under what conditions the SSAF induces slip on the NF. Our findings reveal that a suite of SSAF ruptures, particularly those propagating from north to south, can trigger slip on the normal fault and replicate observed vertical offsets. If the SSAF extends beneath the Salton Sea, earthquakes originating south of the NF intersection are less likely to trigger normal fault slip, although we cannot exclude this possibility. Some SSAF ruptures do not trigger discernible slip on the NF, rendering such events undetectable in the stratigraphic record. Our research contributes toward discussions regarding the seismic hazard in southern California, shedding light on the interplay between the SSAF and NF.

California

Characterizing directivity in small (M 2.4-5) aftershocks of the Ridgecrest sequence

Directivity, or the focusing of energy along the direction of an earthquake rupture, is a common property of earthquakes of all sizes and can cause increased hazard due to azimuthally dependent ground‐motion amplification. For small earthquakes, the effects of directivity are generally less pronounced due to reduced rupture size, yet the directivity in small events can bias source property estimates and provide important insights into general regional faulting patterns. However, due to observational limitations, directivity is usually only measured and modeled for large events. As such, many studies of small earthquakes either ignore directivity altogether or assume a constant rupture direction for all events in a cluster. In our study, we apply a refined directivity fitting method constrained with two separate methods of source deconvolution to the dataset of aftershocks of the 2019 Ridgecrest earthquakes, which contain a large number of well‐recorded small‐to‐mid sized earthquakes occurring in close proximity to each other. The revealed directivity of 100+ small (M 2.4–5) earthquakes is highly heterogeneous and primarily oblique to and away from the main fault strike, suggesting a complex postseismic stress redistribution. In addition, the energy focusing effect of directivity appears to bias the selection of high‐quality data from stations in the direction of rupture, leading to average stress‐drop increases of 50% if directivity is not accounted for.

California

Grand Canyon landslide-dam and paleolake triggered by the Meteor Crater impact at 56 ka

This paper hypothesizes that the Meteor Crater impact in Arizona, USA, 56,000 years ago triggered landslides in Grand Canyon that dammed the Colorado River and formed Nankoweap paleolake. This is compatible with shock and earthquake physics for the impact that infer a M5.4 seismic event, attenuated to an effective magnitude of M3.5 at Grand Canyon. Results that support the hypothesis include radiocarbon dating of driftwood and luminescence dating of associated slack-water lake sediments that are preserved in caves up to 60 m above the modern Colorado River. Radiocarbon ages from two locations, including Stanton’s Cave, date the driftwood as 55.25 ± 2.44 ka (n = 4). Sediments associated with the driftwood gave a luminescence age of 56.00 ± 6.39 ka (n = 2). These six Grand Canyon dates, and three published ages for the Meteor Crater impact, show statistically indistinguishable results that support the hypothesis for a geologically instantaneous series of events with a mean age of 55.60 ± 1.30 ka. This work highlights the value of radiocarbon dating near the limits of the technique, integration of multiple dating methods, and seismic and landslide hazards associated with meteorite impacts in regions of extreme topography like Grand Canyon.

Arizona

Landslide volume estimation from seismic waveform features using a global catalog of seismogenic events

Seismic waves generated by large, rapid landslides encode information about the source and can be analyzed rapidly following an event. Even remote landslides can pose hazards to downstream communities, so rapid detection and characterization using existing seismic monitoring networks could be beneficial. In this study, we expand on past regionally limited work by presenting a globally applicable method for estimating landslide volume from seismic features that could be integrated into future landslide seismic monitoring frameworks. We train the model using multivariable linear regression and five seismic features derived from recordings of 129 landslide events of a range of styles and locations with independently estimated volumes. We present two preferred models, one that combines long‐period (LP) and high‐frequency (HF) features and one for use on smaller landslides without observed long‐period signals. We find that our best‐performing model, applicable to landslides larger than 100,000 m 3 with signals containing observable long‐period energy, requires only two features: LP (20–100 s) absolute maximum amplitude and HF (1–5 Hz) rise time (time between the signal start and the maximum envelope amplitude) and has an R 2 score of 0.79. This model predicted volumes within one order of magnitude for 55 out of 58 events. We find that this combination mitigates the trade‐off between mass and acceleration and other variations of landslide style that limit methods based on amplitude alone.

Seismological Research Letters

From landslide susceptibility to risk assessment in the conterminous U.S.

Understanding the spatial distribution of landslide prone-areas and what consequences they may have is important for risk management and land-use planning. In the United States, although landslides occur in every state, a comprehensive landslide risk assessment is still missing. Existing efforts, such as the Federal Emergency Management Agency (FEMA)’s National Risk Index, rely on aggregated products and coarse cartographic units, limiting their geomorphological and practical accuracy. In this study, we present a methodological advance for landslide risk assessment across large areas with incomplete and sparse data. We apply our procedures to the conterminous United States by integrating geomorphologically meaningful partitions and spatial and temporal probability data-driven models. Landslide susceptibility is estimated using a Generalized Additive Mixed Model incorporating a bias capture/correction scheme to account for inventory inaccuracies (reference Area Under the Curve = 0.75). The exceedance probabilities of landslide occurrence are defined for three temporal scenarios (2, 5, and 10 year). Then, we explore the associated potential economic consequences for human settlements and agricultural areas. The findings indicate that the spatial variability of risk is primarily controlled by exposure rather than by susceptibility/hazard alone. The mean risk increases by ∼170% from the 2-year to the 10-year scenario. Beyond its quantitative outcomes, this study offers a blueprint for continental or sub-continental scale landslide risk assessments, demonstrating both the opportunities and current limitations.

Engineering Geology

Afterslip and creep in the rate-dependent framework: Joint inversion of borehole strain and GNSS displacements for the Mw 7.1 Ridgecrest earthquake

The elusive transition toward afterslip following an earthquake is challenging to capture with typical data resolution limits. A dense geodetic network recorded the Mw 7.1 Ridgecrest earthquake, including 16 Global Navigation Satellite System (GNSS) stations and 3 borehole strainmeters (BSM). The sub-nanostrain precision and sub-second sampling rate of BSMs bridges a gap between conventional seismologic and geodetic methods, exemplified by atypical postseismic shear strain reversals observed at nearfield (<2 km) station B921 that remain unexplained. We jointly invert GNSS displacements and BSM strains for coseismic and postseismic slip spanning hours to months over 7 independent periods. Cosiesmically, our model resolves the largest slip magnitudes of up to 6.6 m on the mainshock rupture plane, with similar patterns to other inferred slip distributions. The foreshock fault appears to slip coincidently with mainshock, revealing potential asperities activated during the preceding Mw 6.4 event. Postseismically, the best-fitting models adhere to mechanical rate-and-state expectations of logarithmically decaying slip adjacent to the coseismic rupture terminus, and where deep rheologic conditions favor creep. Most spatial variation occurs in the early postseismic timeframe (<1–2 weeks), with evidence for regional rheologic control and static stress dependence. Triggered creep on the neighboring Garlock Fault unexpectedly persists for >178 days—further highlighting the importance of fault networks in postseismic stress redistribution, critical to assessing future hazard.

Journal of Geophysics Research

Streams, springs, and volcanic lakes for volcano monitoring

Introduction Volcanic unrest can trigger appreciable change to surface waters such as streams, springs, and volcanic lakes. Magma degassing produces gases and soluble salts that are absorbed into groundwater that feeds streams and lakes. As magma ascends, the amount of heat and degassing will increase, and so will any related geochemical and thermal signal. Subsurface magma movement can cause pressurization that alters hydrostatic head and may induce groundwater discharge. Fluid-pressure changes have been linked to distal volcano-tectonic earthquakes (White and McCausland, 2016; Coulon and others, 2017) and phreatic eruptions (for example, Yamaoka and others, 2016). Clearly, changes in groundwater and surface waters are both indicators of unrest and clues to how and where magma is rising toward the surface. Where possible, it is prudent to incorporate real-time hydrologic data into multiparameter monitoring of restless volcanoes. Hydrologic dynamics can also be tracked by changes in groundwater levels that are commonly measured in shallow boreholes (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume, on boreholes; Hurwitz and Lowenstern, 2024). Although inferred to be common, relatively few volcano-hydrology anomalies are well documented, and many are essentially anecdotal (Newhall and others, 2001), reflecting the fact that high-resolution time series remain rare. Extreme examples include the 2008 eruption of Nevado del Huila, Colombia, where relatively minor phreatomagmatic eruptions were accompanied by expulsion of as much as 300 million cubic meters of groundwater from fissures high on the volcano (Worni and others, 2011), generating large lahars. Substantial decreases in flow rate from springs about 8 kilometers from the summit of Mayon Volcano, Philippines, have been noted before most eruptions in the 20th century (Newhall and others, 2001). Stream monitoring at Redoubt Volcano in 2009 allowed Werner and others (2012) to recognize that groundwater was unable to absorb (or scrub) the high flux of volcanic gas and that a high CO 2 /SO 2 precursor signal had been evident for 5 months prior to the eruption. A key to better interpreting hydrologic anomalies—or even identifying them—is therefore obtaining adequate baseline data. Most hydrologic monitoring at U.S. volcanoes has been accomplished by intermittent sampling surveys with annual or less frequent sampling (for example, https://hotspringchem.wr.usgs.gov/index.php ). More frequent sampling, however, generally is needed to establish reliable baselines. A recent hydrologic and hydrothermal monitoring experiment at 25 sites and 10 of the 12 level 4 (very high threat) volcanoes in the U.S. portion of the Cascade Range demonstrated that there is sufficient temporal variability in hydrothermal fluxes, even during quiescent periods, that one-time measurements will commonly have limited interpretive value (Crankshaw and others, 2018). Thus, surveys are best augmented with data from streamgages (for example, Evans and others, 2004; Bergfeld and others, 2008). Streamflow (water discharge) data allow measured temperature and specific conductance to be converted to heat and solute mass fluxes, which could be insightful parameters for detecting anomalous activity (McCleskey and others, 2012). At the Yellowstone Caldera, long-term monitoring of river solutes has allowed calculation of the chloride flux, a proxy for heat discharge (Hurwitz and others, 2007; McCleskey and others, 2016) from the subsurface magma. This is readily accomplished because data from streamgages are continuously recorded and archived by the U.S. Geological Survey (USGS) National Water Information System (NWIS) (USGS, 2024). Similar studies on stratovolcanoes or shield volcanoes would be scientifically useful, and yet are logistically challenging, requiring streamgages on numerous radial drainages complemented by either frequent manual sampling or numerous deployments of equipment to measure water temperature and specific conductance as a proxy for water chemistry. Another challenge is that some volcanic areas, especially shield volcanoes, are characterized by near-surface porous rocks and soils, such that surface streams are rare and replaced by distant, dilute large-volume springs with only a trace of any original volcanically sourced water (Manga, 2001; Hurwitz and others, 2021). Volcanic lakes are worthy of special attention for monitoring efforts, as their temperature and composition can provide evidence of increased flux of volatile-rich fluids from below. Quantifying changes in volatile and heat release from magma can be simpler in lakes than for volcanoes with radial drainages and no major lakes. Moreover, volcanic lakes pose a range of hazards themselves, including phreatomagmatic eruptions, debris flows, flank collapse, tsunamis, and toxic gas release (Mastin and Witter, 2000; Delmelle and others, 2015; Manville, 2015; Rouwet and others, 2015)—hazards that have historically been responsible for substantial loss of life at many volcanoes worldwide (Manville, 2015). Catastrophic CO 2 release at Lake Nyos, Cameroon, in 1986 suffocated about 1,750 people and about 3,500 livestock and was probably triggered by a large landslide into the gas-saturated lake (Kling and others, 1987; Evans and others, 1993). Gas-charged springs in Soda Bay within Clear Lake (California) have caused almost a dozen deaths to bathers in the past hundred years (ABC News, 2000). A 2005 example of lake overturn and abundant gas release was documented at Mount Chiginagak in Alaska (Schaefer and others, 2008) but did not result in any human casualties. Although thermally stratified lakes, which promote trapping of exsolved magmatic gas, tend to develop in tropical regions, the phenomenon can also arise where salinity creates meromixis (a condition in which a lake does not mix completely), as occurs in Mono Lake, California (Jellison and Melack, 1993; Jellison and others, 1998). If magma erupts or flows into a lake, the interaction between hot magma and cold water can be explosive (Mastin and others, 2004; Zimanowski and others, 2015) and substantially expand the area affected by the eruption. Another hazard is the breaching of crater rims by landslides triggered by volcanic and (or) seismic activity. Under some circumstances, substantial volumes of water can be displaced, leading to large floods and lahars. Late Holocene lake flooding from Aniakchak Crater in the Alaska Peninsula (Waythomas, 2022) and from Paulina Lake in Newberry Crater, Oregon (Chitwood and Jensen, 2000), caused by the failure of outlet sills, testify to the substantial hazards at lake-filled calderas. Several volcanic systems in the United States host lakes known to receive heat and gas from underlying magma. These lakes vary widely in area, depth, and chemical composition. Lakes are present at level 4 volcanoes, including Crater Lake and Newberry Volcano in Oregon; Yellowstone Caldera in Wyoming; Long Valley Caldera, Clear Lake volcanic field, Medicine Lake, and Salton Buttes in California; and Aniakchak Crater, Mount Katmai, Fisher Caldera, Mount Okmok, and Kaguyak Crater, among others, in Alaska. A water lake was present in Halemaʻumaʻu, the crater of Kīlauea, Hawai‘i (fig. F1), from October 2019 to December 2020. Level 3 volcanoes with lakes include Mono Lake volcanic field (Calif.), Mount Bachelor (Ore.), Ukinrek Maars and Mount Chiginagak (Alaska), and Soda Lake (Nevada). In addition, there are lakes at many levels 1 and 2 volcanoes. In the United States, there are no strongly acidic lakes that receive abundant input of magmatic gas, such as those found at Mount Ruapehu (New Zealand), Ijen and Kelud (Indonesia), and Poás (Costa Rica). Nevertheless, many contain fluids that provide clues to magmatic processes below. Since publication of a previous report on recommended instrumentation for volcano monitoring (Moran and others, 2008), continuous hydrologic monitoring has become increasingly feasible. However, changes in water pressure, temperature, and chemistry remain, in general, poorly studied phenomena at volcanoes (Sparks, 2003; National Academies of Sciences, Engineering, and Medicine, 2017). Recent efforts by the USGS have included the temporary study of Cascade Range volcanoes, which included frequent (15 minute to hourly) temporal sampling of temperature, depth, and conductivity (Crankshaw and others, 2018; Ingebritsen and Evans, 2019). At Yellowstone Caldera, many streamgages have now added thermistors and specific conductance sensors, allowing estimation of time-dependent chloride flux as a proxy for variations in subsurface heat flux (McCleskey and others, 2012, 2016). Efforts to better understand lakes have also accelerated, with bathymetric mapping and sampling carried out at several locations in the United States. Especially thorough work was done at Yellowstone Lake thanks to the Hydrothermal Dynamics of Yellowstone Lake (HD-YLAKE, https://hdylake.org ) project, funded primarily by the National Science Foundation. In addition to geophysical surveys and recovery of cores and other samples, HD-YLAKE investigations included remotely operated vehicle (ROV) investigations of hydrothermal vents on the lake floor (fig. F2). Data collected by the ROV provided a better understanding of the thermal and chemical influx from lake-bottom hydrothermal systems (Sohn and others, 2017). In this chapter, we focus on detecting changes in the chemistry, temperature, discharge, or water levels of streams, springs, and lakes that can be caused by seismicity, volumetric strains, or increases in gas flux associated with ascending magma. There is unavoidable overlap with other chapters of this report. Samples of water and gas can also be obtained in boreholes ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume; Hurwitz and Lowenstern, 2024), both shallow and deep. Gas monitoring ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–E, 11 p., https://doi.org/10.3133/sir20245062e.">chapter E , this volume; Lewicki and others, 2024) relies in part on samples from springs and wells, particularly where measurable gas plumes are absent. Water acts as a trigger and lubricant for landslides and sediment-rich floods, and so hydrology has obvious relevance for lahar monitoring, as discussed in of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–H, 6 p., https://doi.org/10.3133/sir20245062h. ">chapter H (this volume; Thelen and others, 2024). Shared situational awareness among scientists engaged in geophysical, gas, and hydrologic monitoring will improve overall understanding of the volcanic hazard.

Scientific Investigations Report

Global patterns of coseismic landslide runout mobility differ from aseismic landslide trends

Coseismic landslides significantly contribute to human and economic losses during and immediately following earthquakes, yet very little data on the runout of such landslides exist. While well-established behavior of aseismic (e.g., hydrologically triggered) landslide runout mobility suggests strong correlation between landslide size and mobility, limited studies of coseismic landslide runout find conflicting mobility trends. We present a global dataset of runout lengths produced from a new automated method for estimating landslide runout, developed and validated using 1726 manually mapped landslides from five unique earthquakes. We then apply the automated runout tool to 23 global earthquake-induced landslide inventories, producing a compiled database of 73,665 measured and estimated runout lengths of coseismic landslides to assess mobility trends. We find a significant divergence between well-established aseismic mobility trends and that of coseismic landslides, with far greater scatter and more complex mobility patterns in earthquake-triggered landslides. As a function of landslide size, we observe global coseismic landslide mobility patterns are bilinear, becoming increasingly less mobile with increasing size above some threshold. This discordance between aseismic and coseismic landslide mobility may be a function of landslide type, kinematics, hydrology, and or setting that systematically differ between triggering mechanisms and should be explored in more depth to develop predictive models of these unique runout patterns. These results suggest hazard and risk models for coseismic landslides may significantly under-predict or over-predict impacts, depending on the size of triggered landslides.

Engineering Geology