USGS Science⌕ Search

SEARCH · USGS Science

Results for “Ore and Energy Resource Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,664 records · Page 14Linked to original sources
USGS2025

Estimation of dynamic geologic CO2 storage resources in the Illinois Basin, including effects of brine extraction, anisotropy, and hydrogeologic heterogeneity

Since the vast majority of carbon dioxide (CO 2 ) storage resources in the United States are in deep saline aquifers, optimizing the use of these saline storage resources could be crucial for efficient development of geologic CO 2 storage (GCS) resources and basin- or larger-scale deployment of GCS in the country. Maximum CO 2 injection rates can be enhanced by extracting brine from the CO 2 storage unit. However, disposal of the extracted brine is both a technological and economic challenge. The lowest-cost option would likely be reinjection of the extracted brine into another formation above or below the CO 2 storage unit. Therefore, it is important to estimate brine injectivity as it will constrain the potential to increase CO 2 injectivity at an injection site that has access to multiple geologic storage units where either CO 2 or brine can be injected. Using a simulation-optimization framework, coupled with a non-isothermal, multiphase CO 2 -water-salt equation-of-state module, we developed a computationally efficient method for evaluating optimization of simultaneous CO 2 injection, brine extraction, and brine (re)injection at hypothetical injection sites deployed across a geologic basin. The Illinois basin is ideal for testing our methodology because it contains multiple geologic storage units with seals in between them to isolate injection of CO 2 in one unit from interfering with the injection of either brine or CO 2 in another unit above or below it. In addition, we investigated the relative effects of variation in key geologic parameters as well as two reservoir structures (hydrogeologic heterogeneity/anisotropy and homogeneity/isotropy) on CO 2 injectivities and enhancement of CO 2 injectivity through extracting brine. Results suggest that permeability, depth, and especially thickness of the storage unit could be the most influential parameters determining CO 2 injectivity. They also suggest that only injecting CO 2 into the storage unit with the greatest injectivity, enhancing that unit’s injectivity by extracting brine, and disposing of the produced brine in other suitable units could maximize total CO 2 injectivity in limited regions of the basin. At the majority of simulated injection sites, however, we found that injecting CO 2 into all of the accessible and suitable storage units was more likely to maximize the CO 2 storage resource.

Illinois, Kentucky, Indiana↗
USGS2021

Remote sensing-based actual evapotranspiration assessment in a data-scarce area of Brazil: A case study of the Urucuia Aquifer System

The large groundwater reserves of the Urucuia Aquifer System (UAS) enabled agricultural development and economic growth in the western Bahia State, in northeastern Brazil. Over the last several years, concern has grown around the aquifer’s diminishing water levels, and water balance (WB) studies are in demand. Considering the lack of measured actual evapotranspiration (ET a ), a major component of the water cycle, this work uses the Operational Simplified Surface Energy Balance (SSEBop) model to estimate ET a , and compares it to basin-scale estimates from the Soil Moisture Accounting Procedure (SMAP) monthly model and from an annual WB closure method, based on gridded meteorological data and the Gravity Recovery and Climate Experiment (GRACE) product. Additionally, a comparative assessment of different versions of the SSEBop parameterization was performed. Moderate Resolution Imaging Spectroradiometer (MODIS) imagery was used to implement eight different versions of the SSEBop algorithm over the UAS between 2000 and 2013. SSEBop and SMAP ET a yielded similar seasonal patterns, with correlation coefficient (r) up to 0.65, mean difference (MD) of 0.8 mm/month and mean absolute difference (MAD) of 18.5 mm/month. Comparison of SSEBop annual ET a estimates to annual SMAP and WB closure estimates yielded low MD (12.1 and −7.3 mm/year, respectively) and MAD (82.5 and 82.8 mm/year, respectively), but also low r values (0.00 and 0.37, respectively). The comparison of the different SSEBop versions indicated the need to incorporate a calibration step of the aerodynamic heat resistance (r ah ) parameter. SSEBop results were also used for land cover and drought monitoring. Analysis indicates that agriculture, associated with an increasing trend of atmospheric evaporative demand, is responsible for the decrease in groundwater levels and streamflow in the studied time period.

Urucuia Aquifer System↗
USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗
USGS2024

California State Waters Map Series—Benthic habitat characterization in the region offshore Humboldt Bay, California

Coastal and Marine Ecological Classification Standard (CMECS) geoform, substrate, and biotic component geographic information system (GIS) products were developed for the California State Waters of northern California in the region offshore of Humboldt Bay. The study was motivated by interest in development of offshore wind-energy capacity and infrastructure in Federal waters offshore. This project, carried out by the U.S. Geological Survey (USGS), resulted in four data releases for individual map blocks that are part of the “California State Waters Map Series”: (1) Offshore of Arcata, (2) Offshore of Eureka, (3) Offshore of the Eel River, and (4) Offshore of Cape Mendocino. The study area consists of 436 square kilometers of multibeam echo sounder (MBES) data acquired by Fugro Pelagos, Inc., in 2007. Towed camera-sled video was acquired in 2009 and 2010 to supervise the classification of the MBES data into habitats, and single channel sparker data were collected to calculate sediment thickness above the transgressive unconformity. Using video observations of habitat as ground truth, derivatives of the MBES data were classified into 3 seafloor character types (hard-rugose, hard-flat, and soft-flat), 26 induration-slope-depth groups, and 15 geoforms. The study area substrate is predominantly soft-flat sediment (mud and fine sand) covering 73.6 percent of the area. Hard-flat substrate areas, predominantly coarse sediment in scour depressions, cover 5.4 percent of the study area. The hard-rugose substrate areas are primarily outcrops of layered sedimentary bedrock and constitute 20.9 percent of the study area. Fifteen geoforms were identified in the analysis. The predominant geoforms mirror the seafloor character results, shelf geoforms, rock outcrop geoforms, and scour depression geoforms. Rock and scour areas are restricted to the southern portion of the study area off Cape Mendocino where uplift has exposed bedrock. On the flat shelf area post-transgressive sediment varies in thickness from 1.7 meters (m) nearshore to 28.1 m offshore.

California↗
USGS2026

Continental-scale prediction of hydrologic signatures and processes

Understanding how dominant hydrologic processes and their drivers vary across diverse continental-scale landscapes is critical for hydrologic modeling and water management applications. Our research addresses this question by synthesizing large-sample watershed datasets, Caravan and GAGES-II, and developing random forest models to identify patterns in hydrologic function. We assessed dominant processes by examining hydrologic signatures – summary indicators of watershed function derived from hydroclimatic time series and random forest models across 14 146 gauged United States watersheds. The results reveal clear continental-scale gradients in hydrologic processes, including baseflow, overland flow, storage, and water balance losses. Our map of dominant processes highlights, for example, the transition from baseflow to fast responses and back to baseflow along the elevation gradient from the Appalachian spine, through the Piedmont, to the Eastern Coastal Plain; a distinct outer ring around the Great Lakes region; and sharp contrasts between coastal and inland processes in the West. Variable importance analysis from random forest models show that processes in the western U.S. are primarily controlled by climate, whereas in the eastern U.S., soil, geology, and topography play larger roles, with distinct human influences apparent in urban areas. Our approach of estimating dominant processes and their drivers facilitates extending process knowledge from research watersheds to the continental scale, assessing current hydrological understanding, and evaluating hydrological model structures.

conterminous United States↗
USGS2025

Characterizing Meteor Crater impact melts through geochemistry and textural analysis

The U.S. Geological Survey Astrogeology Science Center houses the Meteor Crater sample collection, an assemblage of over 2,500 meters of cuttings from 161 drill holes into Meteor Crater’s rim, flanks, and ejecta blanket. We have utilized this unique collection to study the composition and spatial distribution of impact-generated materials from within the ejecta blanket. Meteor Crater has historically been known to have generated only a relatively small amount of impact melt compared to other terrestrial craters of similar size. A detailed compositional and textural dataset of impact-derived melts from this impact can therefore be a useful asset in improving our understanding of crater formation, and in particular impact melt formation. We have characterized 42 impact-melt particles from Meteor Crater using a scanning electron microscope and an electron microprobe for textural and compositional analysis. We analyzed samples from six drill holes in the ejecta blanket, situated to the northwest, southeast, south, and southwest of the crater (ejecta northeast of the crater is devoid of impact melts). Impact melts were collected from drill cuttings at various depths within the ejecta blanket, ranging from a few centimeters below the surface down to ~6.5 meters. Backscattered electron (BSE) images were acquired for each analyzed impact-melt particle. To characterize the various textures and phases present in each impact melt, we also took many detailed BSE images. Our geochemical analyses include full spectral profiles using energy dispersive X-ray spectrometry and well-calibrated wavelength dispersive spectrometry for a number of phases, including minerals (olivine, pyroxene, and so on), pristine glass, and metallic inclusions. The full dataset is available in ScienceBase as a data release (Gullikson and others, 2024), accessible at https://doi.org/10.5066/P9OGAJ8P . Our goal for this Open-File Report is to provide a summary of this immense dataset, details on data collection, descriptions of the different phases observed within impact-melt particles (both geochemically and texturally), and observable trends.

Arizona↗
USGS2024

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 5 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 5, the subject of this scientific investigations map, has an area of 211 km 2 and has water depths that range from 23 meters (m) on the Stellwagen Bank crest to 105 m in the Stellwagen Basin. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates on the crest and western flank of the south-central part of Stellwagen Bank and in Stellwagen Basin to the west. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 729 stations were analyzed, including 620 sediment samples. The geologic substrate maps of quadrangle 5 show the distribution of 20 substrates that represent a wide range of textures, such as mobile and rippled sand, immobile sand, sand that partially veneers gravel, boulder ridges, and mud. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 5. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that utilize the various substrates, and to support seabed management in the region.

Massachusetts↗
USGS2025

Systematic approach to prioritize wells for effective groundwater monitoring and management in the Arkansas Headwaters Basin, Colorado, USA

Study region The Arkansas Headwaters Basin, an intermountain basin in the Southern Rocky Mountains of North America. Study focus Our specific focus is choosing a set of wells to support a possible future regional groundwater-surface water model that would support water management. We present a three-step process using multiple criteria to score, predict, and choose prioritized wells that capture the full distribution of data including extremes. The three-step process provides accessible visualizations, fiscally efficient well prioritization, and screening useful for subsequent groundwater modeling. The novelty of the proposed methodology is the systematic approach integrating a scoring and a predictive approach to support a selection path. The systematic approach may be broadly adapted for other basins. New hydrological insights for the region Understanding regional hydrology hinges on efficient collection of hydrologic data that captures the relevant dynamics including extremes. The present study, a case study for a particular basin in the Southern Rocky Mountains, is the first use of a scripted (R software) strategy to select an economical and representative set of monitoring wells. Our findings suggest caution when using proximity as a proxy for correlation, because proximal wells in the same geologic formation and similar depths are not always correlated. In the Arkansas Headwaters Basin, subsurface geology may be less influential on groundwater elevations than broader hydrologic influences, such as regional drought.

Colorado↗
USGS2024

Geologic map of Scoggins Dam, Henry Hagg Lake, and Scoggins Valley, Washington County, Oregon

New geologic mapping (Wells and others, 2020b) and geophysical mapping (Blakely and others, 2000; McPhee and others, 2014; Wells and others, 2020a) document kilometers of Cenozoic right-lateral offset along the Gales Creek Fault Zone, a major, northwest-striking fault zone forming the boundary between the Tualatin Valley and the Coast Range. The Bureau of Reclamation’s (Reclamation) Scoggins Dam (fig. 1), in the Coast Range foothills west of Forest Grove, Oregon, lies within the Gales Creek Fault Zone as mapped by Wells and others (2020a, 2020b; fig. 2). Active faults of the Gales Creek Fault Zone defined by paleoseismic trenching (Redwine and others, 2017, 2019b, Horst and others, 2018, 2019, 2021, and Wells and others, 2020a) are presently mapped as projecting through the existing dam. The Pacific Northwest Region of Reclamation requested assistance with geologic studies around Scoggins Dam to provide better understanding of fault locations and their activity, which are needed to design a modification of the dam (Maguire, 2019a, b). The scope of this project includes detailed geology of the existing Scoggins Dam site, Henry Hagg Lake, the reservoir behind the dam, and Scoggins Valley downstream of the existing dam, particularly around a potential new dam site, where Scoggins Creek cuts through a narrow gap formed by a resistant felsic tuff bed that crosses the valley.

Oregon↗
USGS2025

The role of alkali bicarbonate-sulfate brines in the genesis of carbonatite REE resources at the Bear Lodge Alkaline Complex, Wyoming

Rare-earth element (REE) resources in the Bear Lodge Alkaline Complex, Wyoming, are hosted in a variably leached carbonatite dike swarm spatially related to bodies of diatreme breccia. This study examines fluid inclusions in carbonatite dikes, peripheral fluorite breccias, and smoky quartz veins to reconstruct the physiochemical conditions of REE mineralization. Results reveal a multi-stage evolution of carbonatitic fluids: 1) high-temperature (330–432°C), CO 2 -rich magmatic fluids, 2) REE-enriched alkali bicarbonate-sulfate brines, and 3) low-temperature meteoric (117–182°C) or diluted magmatic fluids. Multiphase inclusions (stage-2) contain burbankite, nahcolite, and alkali sulfate daughter crystals, linking the brines to early burbankite [(Na,Ca) 3 (Sr,Ba,REE) 3 (CO 3 ) 5 ] mineralization in carbonatite. REE mobility has been linked to the stability of aqueous complexes with ligands such as Cl-, SO 4 2- , and HCO 3 - . However, light REEs were not initially transported significant distances, rather they crystallized as burbankite from brines or brine-melts associated with the carbonatite magma. Crystallization of burbankite removed Na from the system, leaving residual fluids with high K/Na ratios and promoting potassic fenitization throughout the complex. Fractionation of light and heavy REEs and involvement of low temperature (<300°C), high K/Na bicarbonate brines may have facilitated transport and formation of peripheral occurrences that are more enriched in heavy REEs at Bear Lodge.

Wyoming↗
USGS2025

Near-surface material and topography generate anomalous high-frequency ground motion amplification in Chugiak, Alaska

An ∼3 km long nodal array oriented approximately east–west was deployed in Chugiak, Alaska, by the U.S. Geological Survey during 2021. The array intersects with the permanent NetQuakes station NP.ARTY, where peak ground acceleration (PGA) value of 1.98 g was recorded during the 2018 M w 7.1 Anchorage, Alaska, earthquake, in sharp contrast to the PGA of ∼0.3 g at a site just 4 km to the west. Seismic data for M w 1.8–4.3 aftershocks from the M w 7.1 event recorded by the nodal array confirm the anomalously large ground motions obtained at NP.ARTY as well as similar amplifications at nodes within ∼1 km to the east. Here, we performed 0–10 Hz 3D finite‐difference simulations, including high‐resolution surface topography, to explore the cause of the unexpectedly large amplification. As expected, the simulations computed with a regional 3D tomography velocity model severely underpredict the 0–10 Hz acceleration records at almost all sites. Adding a near‐surface low‐velocity taper to 300 m depth amplifies the accelerations by up to a factor of 5 and enables a reasonable match between the nodal data and simulations at sites to the west of NP.ARTY. However, this model still underpredicts the spectral energy in the area covered by glacial sediments by up to an order of magnitude. The addition of a till layer using a depth‐dependent shear‐wave velocity ( ⁠⁠ V s ) profile along with a homogeneous, 8 m thick low‐velocity layer with V s = 250 m/s representing the kame terraces improves the fit to data to within a factor of 2 at nodes located on top of the glacial sediments. Our study shows that the anomalously large high‐frequency amplification recorded at and near NP.ARTY can be explained by a combination of topographic effects and near‐surface low‐velocity material with amplification effects on the high‐frequency ground motion by up to about 40% and an order of magnitude, respectively.

Alaska↗
USGS2024

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 2 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 2, the subject of this scientific investigations map, has a mapped area of 209 km 2 and has water depths that range from about 19 meters (m) on the Stellwagen Bank crest to about 68 m in the Stellwagen Basin. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates across the southwestern part of Stellwagen Bank, in Stellwagen Basin to the west and southwest of the bank, and in Little Stellwagen Basin and the western part of Race Point Channel to the south of the bank. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 733 stations were analyzed, including 656 sediment samples. The geologic substrate maps of quadrangle 2 show the distribution of 19 geologic substrates that represent a wide range of textures, such as rippled and immobile sand, immobile muddy sand and sandy mud, sand that partially veneers gravel, and a boulder ridge. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 2. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that utilize the various substrates, and support seabed management in the region.

Massachusetts↗
USGS2026

Ten new insights in climate science 2025

Interdisciplinary understanding is vital for delivering sound climate policy advice. However, navigating the ever-growing and increasingly diverse scholarly literature on climate change is challenging for any individual researcher. This annual synthesis highlights and explains recent advances across a variety of fields of climate change research. This year, the 10 insights focus on: (1) the record-warmth of 2023/2024 and the elevated Earth energy imbalance; (2) acceleration of ocean warming and intensifying marine heatwaves; (3) northern land carbon sinks under strain; (4) reinforcing feedback between biodiversity loss and climate change; (5) accelerated depletion of groundwater; (6) global dengue incidence; (7) global income losses and labour productivity declines; (8) strategic scaling of CDR; (9) integrity challenges in carbon credit markets and emerging responses; and (10) effective policy mixes for emissions reductions. The insights have been written to be accessible to researchers from different fields, serving as entry-points to specific topics, as well as providing an overview of the evolving landscape of climate change research. In the final section, the insights are used to develop overarching policy-relevant messages. This paper provides the basis for a science-policy report that was shared with all Party delegations ahead of COP30 in Belém, Brazil.

Global Sustainability↗
USGS2025

Three-dimensional seismic velocity models for the San Francisco Bay region, California from joint body-wave and surface-wave tomography validated by waveform simulation

A high-resolution seismic velocity model for both P and S waves is essential for the San Francisco Bay (SFB) region to accurately simulate earthquake ground motions and assess seismic hazards in this high-risk region. We present new three-dimensional P-wave and S-wave velocity (Vp and Vs) models of the SFB region developed using joint tomographic inversion with a rich set of earthquake and active-source body-wave data and ambient-noise surface-wave data. We designed a dynamic balance strategy to effectively balance the contributions of body-wave and surface-wave data during each iteration of the inversion. Owing to the complementary resolution of body-wave and surface-wave data, our new models are significantly improved compared to previous tomographic models. Major geologic features in the SFB region, including low-velocity basins, high-velocity Franciscan Complex, granite, and gabbro rocks, and across-fault velocity contrasts, are imaged in our Vp and Vs models. Compared to the geology-based U.S. Geological Survey velocity model, our new model has better defined structures for some important areas that are of great concern for seismic hazard assessment, such as the Sacramento-San Joaquin Delta, and the 2014 magnitude 6.0 South Napa earthquake area. We validated our model by simulating waveforms for a set of moderate-magnitude earthquakes. The good performance of our model in waveform simulation indicates its potential for improving ground motion simulation and seismic hazard assessment in the SFB region.

California↗
USGS2025

Favorability mapping for hydrothermal power resource assessments of the Great Basin, USA

The U.S. Geological Survey (USGS) is updating the 2008 assessment of conventional hydrothermal resources for the Great Basin in the western United States. As part of this work, the workflow for hydrothermal resource favorability maps is being modified to integrate modern data-driven machine learning (ML) methods. Improvements include: [1] using new and refined evidence layers (features); [2] using an order of magnitude more training sites (labeled examples); [3] utilizing simple but non-linear supervised ML algorithms; [4] representing positive training sites (wells with measured heat flow) with their ordinal value proportional to the magnitude of convective upflow (i.e., low, high, or very high convective signals instead of past strategies using positive-negative labels); [5] supplementing training sites with additional sites with low convective signals to represent diverse under-sampled areas where hydrothermal systems are unlikely to exist; [6] comparing with competing approaches; and [7] utilizing Monte Carlo cross-validation to estimate and evaluate prediction uncertainty. For the new favorability map, over half of the power-producing systems (i.e., 15 of 28) are predicted in the 99th percentile of most favorable locations (i.e., the highest 1 % of favorability, corresponding to 1 % of the map area), exceeding the performance of past models that have explicitly used power plants as training sites. Previous favorability maps predicted approximately half of the power-producing hydrothermal systems above the 80th percentile (i.e., 20 % of the map area). For the new favorability map, 93 % of power-producing systems (i.e., 26 of 28) are above the 80th percentile. The power-producing systems for which the new model does not perform well are either comparatively small, low-temperature systems or systems also not predicted well by prior modeling approaches, suggesting that these few systems are unusual when compared with most power-producing systems. Focusing research on these known, seemingly different systems may yield new insights and subsequent discovery of new prospects.

California, Idaho, Nevada, Oregon, Utah↗
USGS2024

Characterization of groundwater resources near the southeastern part of Puget Sound, Washington

More than 1 million people live within the active model area (AMA) in the southeastern part of the lowlands surrounding Puget Sound, or Puget Lowland, Washington, and groundwater is the source for approximately one-half of their public, domestic, and irrigation water demands. The 887-square-mile AMA, located in King and Pierce Counties, represents the area of analysis for the conceptual hydrogeologic framework and numerical groundwater-flow models within the study area and includes the Puyallup River and Chambers-Clover Creek watersheds. To assess the potential hydrologic and anthropogenic impacts to groundwater and the connected surface-water resources, conceptual and numerical groundwater-flow models of groundwater flow were developed by the U.S. Geological Survey Washington Water Science Center in close cooperation with 18 water-resource agencies and stakeholders. This multichapter volume documents the development of the conceptual and numerical groundwater-flow models of groundwater flow. Chapters A, B, and C provide an overall introduction to the multichapter volume (Chapter A), the conceptual hydrogeologic framework (Chapter B), and the groundwater budget (Chapter C). Chapters D and E describe numerical groundwater-flow model construction and calibration (Chapter D) and the numerical groundwater-flow model results (Chapter E). Collectively, these reports present a characterization and simulation tool for groundwater resources near the southeastern part of Puget Sound, Washington.

Scientific Investigations Report↗
USGS2024

Site response in the Walnut Creek–Concord region of the San Francisco Bay, California: Ground motion amplification in a fault-bounded basin

Thirty‐seven portable accelerometers were deployed in the eastern San Francisco Bay communities of Walnut Creek and Concord to study site response in a fault‐bounded, urban, sedimentary basin. Local earthquakes were recorded for a period of two years from 2017 to 2019 resulting in 101 well‐recorded events. Site response is estimated by two methods: the reference site spectral ratio method and a source‐site spectral inversion method. The reference site spectral ratio method allows investigation of the variability of site amplification with source azimuth and frequency. The source‐site spectral inversion method yields the best least‐squares fit to site response for a database of ground‐motion records. Both methods show substantial amplification in the Walnut Creek–Concord basin below 2 Hz indicating strong surface‐wave development. Greater amplification is seen for sources aligned along the long axis of the basin. Inversion using close‐in sources at short distances yields lower amplification at longer periods than the entire data set due to reduced surface‐wave generation for steeper angles of incidence. Inversion of site response spectra for shallow shear‐wave velocity using a global search algorithm yields V S30 values consistent with generalized mapping results based on geology and topography but with greater variability due to local site variations. 3D finite‐element modeling shows greater amplification in the Walnut Creek–Concord basin with a basin‐edge effect likely contributing to higher ground motions. Topography is also seen to lead to increased scattering and shadowing effects.

California↗
USGS2026

Quantitative mineral resource assessment of lithium pegmatite deposits in the southern Appalachian orogen

The first quantitative mineral resource assessment for undiscovered lithium pegmatite deposits in the southern Appalachian region of the United States was conducted. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical and mineral occurrence data. Lithium pegmatite prospectivity of the tracts was ranked with simplified mappable criteria, including proximity to Paleozoic felsic intrusions and major lithotectonic structures, stream sediment geochemical anomalies, and pegmatite occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. These estimates were integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was applied to convert the probabilistic estimates of contained lithium into recoverable material. The identified lithium pegmatite resources for the Carolina Lithium and Kings Mountain deposits, North Carolina, contain 1589 thousand tons (kt) of Li 2 O. The median contained undiscovered resource for the southern Appalachian orogen was estimated to be 2240 kt Li 2 O. At 90% confidence, the region contains at least 130 kt Li 2 O, and 10,700 kt at 10% confidence. After applying economic filters, the median recoverable contained resource was 1430 kt Li 2 O, corresponding to approximately 201 years of current lithium imports for consumption in the United States. North and South Carolina are likely to contain most of these resources. Coarse data resolution and intra-state variations in the geological data contribute to uncertainty of undiscovered lithium pegmatite resources. Continued efforts to harmonize disparate geospatial datasets with updated or new information can improve the accuracy and precision of estimated undiscovered lithium pegmatite resources in the study area and at broader scales.

Alabama, Georgia, Maryland, North Carolina, South ↗