USGS Science⌕ Search

SEARCH · USGS Science

Results for “Mechanics of Materials”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
USGS1970

Surfactants as blackbird stressing agents

Applications of wetting-agent solutions produce mortality in birds. The exact cause of death is undetermined but it is believed that destruction of the insulating qualities of the plumage permits ambient cold temperatures and evaporation to lower the body temperature to a lethal level. The original concept of using these materials as bird-control tools was developed in 1958 at the Patuxent Wildlife Research Center, Bureau of Sport Fisheries and Wildlife Laurel, Maryland. Early field trials by personnel of the Division of Wildlife Services and the Denver Wildlife Research Center indicated that ground-application techniques had promise but limitations of the equipment precluded successful large-scale roost treatments. In 1966, Patuxent Center personnel began using tanker-type aircraft to evaluate high-volume aerial applications of wetting agents. The success of these tests led to the use of small aircraft to make low-volume, high-concentration aerial applications just prior to expected rainfall. Recent trials of the low-volume method show that, with some limitations, it is effective, inexpensive, and safe to the environment. Current research emphasizes the screening of new candidate materials for efficacy, biodegradability, and toxicity to plants and non-target animals, as well as basic investigations of the avian physiological mechanisms involved. Field trials to develop more effective application techniques will continue.

Proceedings of the Vertebrate Pest Conference↗
USGS1996

Limestone characterization to model damage from acidic precipitation: Effect of pore structure on mass transfer

The pore structure of Salem limestone is investigated, and conclusions regarding the effect of the pore geometry on modeling moisture and contaminant transport are discussed based on thin section petrography, scanning electron microscopy, mercury intrusion porosimetry, and nitrogen adsorption analyses. These investigations are compared to and shown to compliment permeability and capillary pressure measurements for this common building stone. Salem limestone exhibits a bimodal pore size distribution in which the larger pores provide routes for convective mass transfer of contaminants into the material and the smaller pores lead to high surface area adsorption and reaction sites. Relative permeability and capillary pressure measurements of the air/water system indicate that Salem limestone exhibits high capillarity end low effective permeability to water. Based on stone characterization, aqueous diffusion and convection are believed to be the primary transport mechanisms for pollutants in this stone. The extent of contaminant accumulation in the stone depends on the mechanism of partitioning between the aqueous and solid phases. The described characterization techniques and modeling approach can be applied to many systems of interest such as acidic damage to limestone, mass transfer of contaminants in concrete and other porous building materials, and modeling pollutant transport in subsurface moisture zones.

Environmental Science & Technology↗
USGS2025

Source(s) of the smooth Caloris exterior plains on Mercury: Mapping, remote analyses, and scenarios for future testing with BepiColombo data

Mercury hosts widespread smooth plains that are concentrated in the Caloris impact basin, in an annulus surrounding the Caloris basin, and in the adjacent northern smooth plains. The origins of these smooth plains are uncertain, although prior work suggests these plains in the northwestern Caloris annulus might reflect volcanic activity, impact ejecta, or a combination of the two. Deciphering the timing and mode of emplacement of these plains would provide a critical constraint on regional late-stage volcanism or impact effects. In this work, the region northwest of Caloris was investigated using geomorphological and color-based mapping, crater counting techniques, and spectral analyses with the goal of placing constraints on the source of the observed units and identifying the primary emplacement mechanism. Mapping and spectral analyses confirm previous findings of two distinct, yet intermingled, units within these plains, each with similar crater count model ages that postdate the formation of the Caloris impact basin. Mapping, spectra analysis, ages, and the identification of potential flow pathways are more consistent with a predominantly volcanic origin for the smooth plains materials, although these data do not rule out contributions from impact ejecta or impact melt. We propose several hypothetical scenarios, including post-emplacement modification by near-surface volatiles, to explain these observations and clarify the emplacement mechanism for these specific smooth plains regions. Further observations from the BepiColombo mission should provide data to potentially address the outstanding questions from this work.

Remote Sensing↗
USGS1986

Ecological life histories of the three aquatic nuisance plants, Myriophyllum spicatum, Potamogeton crispus and Elodea canadensis

The life histories of Myriophyllum spicatum L., Elodea canadensis Michx., and Potamogeton crispus L., serious aquatic nuisances in many regions of the world, are reviewed to provide insights into the life style of successful aquatic nuisance plants. Specifically, their distribution and spread in North America; their life cycle, productive and reproductive potential; and their ecosystem relationships are reviewed. Hopefully this review will improve a manager's ability to deal with aquatic nuisance problems. It also provides suggestions for basic research needed to develop more effective management practices. It was found that all three species possess a number of adaptations, including an ability to rapidly propagate vegetatively, an opportunistic nature for obtaining nutrients, a life cycle that favors cool weather, and a number of mechanisms which enhance photosynthetic efficiency, which allow them to proliferate. These three species do provide benefits to the ecosystem through their roles in materials cycling and energy flow. Therefore, management of these species should take an integrated approach which recognizes these benefits. The life history information available about the three species varies tremendously; however, a better understanding of resource gain and allocation is needed to manage all three species. Specifically, more research is needed to provide a better understanding of: 1) the role bicarbonate plays in photosynthesis, 2) the role roots play in supplying CO2 to the plabts, 3) resource accumulation and allocation under different temperature and light regimes, 4) resource allocation on a seasonal basis, and 5) nutrient cycling under different management regimes. ?? 1986 Dr W. Junk Publishers.

Hydrobiologia↗
USGS2026

Discrete element investigation of the influence of shallow soil density on the manifestations of strike-slip surface fault rupture

This study investigates the influence of soil relative density on strike-slip surface fault rupture manifestations using three-dimensional numerical simulations performed with the discrete element method (DEM). The simulations capture the formation of distinctive fault strands within complex flower structures using tens of millions of grains. The tendency for dense soils to localize shear manifests as multiple localized shear bands within wide zones of deformation in strike-slip fault rupture, whereas diffuse shear deformation develops within narrow zones in loose soils. The spatial extents of soil deformation are consistent between simulations having similar relative densities but with different quantities of grains. However, individual shears are more distinguishable in assemblages of finer grains than in assemblages of coarser grains. The simulations show the progressive development of new shears within the bounds of previously developed shears. Shear activity transitions inward as fault activity diminishes along the outermost shears and continues along newly developed shears until a vertically dipping throughgoing shear structure develops that accommodates most of the fault displacement thereon. The throughgoing fault develops at smaller fault displacements in looser soils because the first shear rupture propagates closer to the vertical direction and does not undergo as much inward translation of shear activity, as is observed in denser soils. In all simulations, ground surface uplift develops between nonintersecting active shears, and ground surface subsidence tends to develop where new shears intersect previous shears. The surface traces in these simulations are shown to be consistent with analog models and case histories of surface fault rupture occurring in different shallow subsurface materials. Although computationally costly, these modeling results are valuable for providing a strong numerical supplement to traditional analog models used to represent the mechanics of strike-slip zones in soil, and they provide quantifiable stresses and large-strain deformations throughout the model domain.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2014

Event sedimentation in low-latitude deep-water carbonate basins, Anegada passage, northeast Caribbean

The Virgin Islands and Whiting basins in the Northeast Caribbean are deep, structurally controlled depocentres partially bound by shallow-water carbonate platforms. Closed basins such as these are thought to document earthquake and hurricane events through the accumulation of event layers such as debris flow and turbidity current deposits and the internal deformation of deposited material. Event layers in the Virgin Islands and Whiting basins are predominantly thin and discontinuous, containing varying amounts of reef- and slope-derived material. Three turbidites/sandy intervals in the upper 2 m of sediment in the eastern Virgin Islands Basin were deposited between ca. 2000 and 13 600 years ago, but do not extend across the basin. In the central and western Virgin Islands Basin, a structureless clay-rich interval is interpreted to be a unifite. Within the Whiting Basin, several discontinuous turbidites and other sand-rich intervals are primarily deposited in base of slope fans. The youngest of these turbidites is ca. 2600 years old. Sediment accumulation in these basins is low (−1) for basin adjacent to carbonate platform, possibly due to limited sediment input during highstand sea-level conditions, sediment trapping and/or cohesive basin walls. We find no evidence of recent sediment transport (turbidites or debris flows) or sediment deformation that can be attributed to the ca. M7.2 1867 Virgin Islands earthquake whose epicentre was located on the north wall of the Virgin Islands Basin or to recent hurricanes that have impacted the region. The lack of significant appreciable pebble or greater size carbonate material in any of the available cores suggests that submarine landslide and basin-wide blocky debris flows have not been a significant mechanism of basin margin modification in the last several thousand years. Thus, basins such as those described here may be poor recorders of past natural hazards, but may provide a long-term record of past oceanographic conditions in ocean passages.

Basin Research↗
USGS2011

Anticipated sediment delivery to the lower Elwha River during and following dam removal: Chapter 2 in Coastal habitats of the Elwha River, Washington--biological and physical patterns and processes prior to dam removal

During and after the planned incremental removal of two large, century-old concrete dams between 2011 and 2014, the sediment-transport regime in the lower Elwha River of western Washington will initially spike above background levels and then return to pre-dam conditions some years after complete dam removal. Measurements indicate the upper reaches of the steep-gradient Elwha River, draining the northeast section of the Olympic Mountains, carries between an estimated 120,000 and 290,000 cubic meters of sediment annually. This large load has deposited an estimated 19 million cubic meters of sediment within the two reservoirs formed by the Elwha and Glines Canyon Dams. It is anticipated that from 7 to 8 million cubic meters of this trapped sediment will mobilize and transport downstream during and after dam decommissioning, restoring the downstream sections of the sediment-starved river and nearshore marine environments. Downstream transport of sediment from the dam sites will have significant effects on channel morphology, water quality, and aquatic habitat during and after dam removal. Sediment concentrations are expected to be between 200 and 1,000 milligrams per liter during and just after dam removal and could rise to as much as 50,000 milligrams per liter during high flows. Downstream sedimentation in the river channel and flood plain will be potentially large, particularly in the lower Elwha River, an alluvial reach with a wide flood plain. Overall aggradation could be as much as one to several meters. Not all reservoir sediment, however, will be released to the river. Some material will remain on hill slopes and flood plains within the drained reservoirs in quantities that will depend on the hydrology, precipitation, and mechanics of the incising channel. Eventually, vegetation will stabilize this remaining reservoir sediment, and the overall sediment load in the restored river will return to pre-dam levels.

Washington↗
USGS2017

Geology and mining history of the Southeast Missouri Barite District and the Valles Mines, Washington, Jefferson, and St. Francois Counties, Missouri

The Southeast Missouri Barite District and the Valles Mines are located in Washington, Jefferson, and St. Francois Counties, Missouri, where barite and lead ore are present together in surficial and near-surface deposits. Lead mining in the area began in the early 1700’s and extended into the early 1900’s. Hand mining of lead in the residuum resulted in widespread pits (also called shafts or diggings), and there was some underground mining of lead in bedrock. By the 1860’s barite was recovered from the residuum by hand mining, also resulting in widespread diggings, but generally not underground mines in bedrock. Mechanized open-pit mining of the residuum for barite began in the 1920’s. Barite production slowed by the 1980’s, and there has not been any barite mining since 1998. Mechanized barite mining resulted in large mined areas and tailings ponds containing waste from barite mills. The U.S. Environmental Protection Agency (EPA) has determined that lead is present in surface soils in Washington and Jefferson Counties at concentrations exceeding health-based screening levels. Also, elevated concentrations of barium, arsenic, and cadmium have been identified in surface soils, and lead concentrations exceeding the Federal drinking-water standard of 15 micrograms per liter have been identified in private drinking-water wells. Potential sources of these contaminants are wastes associated with barite mining, wastes associated with lead mining, or unmined natural deposits of barium, lead, and other metals. As a first step in helping EPA determine the source of soil and groundwater contamination, the U.S. Geological Survey (USGS), in cooperation with the EPA, investigated the geology and mining history of the Southeast Missouri Barite District and the Valles Mines. Ore minerals are barite (barium sulfate), galena (lead sulfide), cerussite (lead carbonate), anglesite (lead sulfate), sphalerite (zinc sulfide), smithsonite (zinc carbonate), and chalcopyrite (copper-iron sulfide). The Cambrian Potosi Dolomite is the most important formation for the ore deposits, followed by the Eminence Dolomite. Because galena, sphalerite, and barite are less soluble than dolomite, chemical weathering of the ore-bearing dolomite bedrock resulted in the concentration of ore minerals in the residuum. Most of the barite and lead mining was in the residuum, which averages 10 to 15 feet thick. Lead mining by French explorers may have begun in 1719 along Old Mines Creek at Cabanage de Renaudiere, which was followed shortly by the discovery of lead and the development of lead mines at Mine Renault (also called Forche a Renault Mine), Old Mines, and at other places along the Big River, Mineral Fork, and Forche a Renault Creek. Lead mining began sometime between 1775 and 1780 at Mine a Breton, the name of which was later changed to Potosi. Other mining areas were developed in the early part of the 19th century, including Fourche a Courtois (Palmer Mines), the French Diggings, and the Richwoods Mines. Zinc became a valuable resource after the Civil War, and the Valles Mines was an important supplier of zinc as well as lead, with at least some production up until the 1920’s. Lead mining declined in the early part of the 20th century as mining in the Old Lead Belt, Mine La Motte, and the Tri-State District expanded. The earliest lead mines were diggings in the residuum and were round holes (shafts) about 4 feet in diameter dug with pick and shovel about 15–20 feet deep, with drifts dug a short distance laterally from the bottom of the shafts. This mining process was repeated a short distance away until a large area was covered with pits. Some mining in bedrock began by about 1800, with shafts as deep as 170 feet and as much as several hundred feet of lateral drifts. Smelting of the lead ore to elemental lead was first done using a log furnace, which was inefficient; estimates have been made that only about 50 percent of the lead was recovered, and the remainder was lost to the ashes (slags) and to volatilization. Starting in 1798, ash furnaces were used to smelt the ashes from the log furnaces. These two furnaces were worked in tandem for many years but were gradually replaced by other furnaces, including the Scotch hearth. Estimates of lead recovery as high as 80–90 percent have been made for the Scotch hearth. By the mid-1870’s the air furnace was being used, also with estimated lead recovery as high as 80–90 percent. Zinc furnaces were built when zinc became a valuable commodity, but much of the zinc ore was shipped out of the area, either to a smelter in St. Louis, Missouri, or to other smelters. The total lead and zinc production from the Southeast Missouri Barite District and the Valles Mines is estimated at 180,000 tons of lead and 60,000 tons of zinc. An estimated 97,000 tons of lead and an estimated 120,000 tons of zinc were lost during smelting. The estimated losses do not include losses at the mine site during mining and preparation for smelting, such as the loss of fine-grained galena during hand cleaning or the discarding of zinc ore before its value was known, for which no estimates are available. Hand mining for barite in the residuum was active by at least the 1860’s and peaked from 1905 to the 1930’s when several thousand people were engaged in barite mining. Hand mining (diggings) and cleaning of the ore was done in much the same way as earlier lead mining, with the additional use of a rattle box to further clean the barite. Mechanized open-pit mining of old barite diggings began in 1924 to recover barite left behind by hand mining, and washing plants were used to clean the clay from the barite. Hand mining, however, continued to thrive, and washer plants began to close temporarily in 1931; nearly all of the barite produced before 1937 was by hand mining. By the 1940’s, however, all barite mining was mechanized. Mechanized mining used shovels powered by steam, gasoline, or electricity (and by the 1950’s draglines and front-end loaders) to mine the residuum. The ore was loaded onto rail cars (and by the 1940’s, trucks) for shipment to washer plants. Clay was removed from the barite using a log washer, and a jig was used to concentrate the barite. Overflow from the log washers was waste and went to a mud (tailings) pond. The coarse jig tailings went to tailings piles or were used as railroad ballast and, later, to create roads within the mine pit. Some barite was ground, depending on its final use, and some ground barite was bleached using a hot solution of sulfuric acid to remove impurities such as iron minerals and lead sulfide (galena). An earlier bleaching process used lead-lined tanks. Large quantities of water were required for milling the barite; some was recirculated water and the remainder came from dammed streams or was pumped from wells. Tailings and wastewater were impounded behind dikes that were built across small valleys and were increased in height as necessary using washer waste and any overburden that had been stripped. In some cases, dikes were built across valleys that had already been mined for barite. The total production of barite from the Southeast Missouri Barite District and the Valles Mines is estimated to have been about 13.1 million tons. Most of the barite production was from Washington County. Hand mining and processing of barite was inefficient. Estimates of barite recovery range from less than one-fourth to about one-half because pillars between the shafts in the residuum needed to be left unmined for stability. With mechanized mining, large amounts of barite were lost during the milling process. It has been estimated that about 30 percent of the barite was lost and that about two-thirds of the lost barite was fine-grained and was discharged to the tailings ponds. Some galena was lost to the tailings ponds. A 1972 inventory of tailings ponds by the Missouri Geological Survey identified 67 ponds in the Southeast Missouri Barite District (there are more than this currently documented). Results from samples from four ponds that were drilled were used to estimate that the 67 ponds contained almost 39 million tons (or cubic yards) of tailings averaging about 5 percent barite, for a potential reserve of 1.935 million tons of barite. It is not known how much lead was removed during barite mining, either by hand or mechanized mining and processing, how much lead was recovered, or how much lead went as fines to the tailing ponds or as coarse material to mine roads or was otherwise lost.

Missouri↗
USGS1987

Volcanic processes in the solar system

Eruptions of ammonia, water, and sulfur. These have become some of the concerns of planetary volcanologists as they try to understand volcanic processes on other planetary bodies. As exploration of the Solar System has continues, we have been confronted with more and more exotic forms of volcanism and have come to realize that the types of volcanic activity observed on Earth represent only a fraction of the array of volcanic phenomena that are possible. Some volcanic features of other planets have close terrestrial counterparts and appear to have been formed by similar mechanisms and from similar magmas to those on the Earth. but other features are totally different and appear to have been formed from materials that are not normally associated with volcanism on Earth.

Earthquakes & Volcanoes (USGS)↗
USGS2010

Land-use controls on sources and processing of nitrate in small watersheds: Insights from dual isotopic analysis

Studies have repeatedly shown that agricultural and urban areas export considerably more nitrogen to streams than forested counterparts, yet it is difficult to identify and quantify nitrogen sources to streams due to complications associated with terrestrial and in-stream biogeochemical processes. In this study, we used the isotopic composition of nitrate (??15N-NO3- and ??18O- NO3-) in conjunction with a simple numerical model to examine the spatial and temporal variability of nitrate (NO3-) export across a land-use gradient and how agricultural and urban development affects net removal mechanisms. In an effort to isolate the effects of land use, we chose small headwater systems in close proximity to each other, limiting the variation in geology, surficial materials, and climate between sites. The ??15N and ??18Oof stream NO 3- varied significantly between urban, agricultural, and forested watersheds, indicating that nitrogen sources are the primary determinant of the ??15N-NO3-, while the ??18O-NO3- was found to reflect biogeochemical processes. The greatest NO3- concentrations corresponded with the highest stream ??15N-NO3- values due to the enriched nature of two dominant anthropogenic sources, septic and manure, within the urban and agricultural watersheds, respectively. On average, net removal of the available NO3- pool within urban and agricultural catchments was estimated at 45%. The variation in the estimated net removal of NO3- from developed watersheds was related to both drainage area and the availability of organic carbon. The determination of differentiated isotopic land-use signatures and dominant seasonal mechanisms illustrates the usefulness of this approach in examining the sources and processing of excess nitrogen within headwater catchments. ?? 2010 by the Ecological Society of America.

Ecological Applications↗
USGS1993

Aquatic photolysis: photolytic redox reactions between goethite and adsorbed organic acids in aqueous solutions

Photolysis of mono and di-carboxylic acids that are adsorbed onto the surface of the iron oxyhydroxide (goethite) results in an oxidation of the organic material and a reduction from Fe(III) to Fe(II) in the iron complex. There is a subsequent release of Fe2+ ions into solution. At constant light flux and constant solution light absorption, the factors responsible for the degree of photolytic reaction include: the number of lattice sites that are bonded by the organic acid; the rate of acid readsorption to the surface during photolysis; the conformation and structure of the organic acid; the degree of oxidation of the organic acid; the presence or absence of an ??-hydroxy group on the acid, the number of carbons in the di-acid chain and the conformation of the di-acid. The ability to liberate Fe(III) at pH 6.5 from the geothite lattice is described by the lyotropic series: tartrate>citrate> oxalate > glycolate > maleate > succinate > formate > fumarate > malonate > glutarate > benzoate = butanoate = control. Although a larger amount of iron is liberated, the series is almost the same at pH 5.5 except that oxalate > citrate and succinate > maleate. A set of rate equations are given that describe the release of iron from the goethite lattice. It was observed that the pH of the solution increases during photolysis if the solutions are not buffered. There is evidence to suggest the primary mechanism for all these reactions is an electron transfer from the organic ligand to the Fe(III) in the complex. Of all the iron-oxyhydroxide materials, crystalline goethite is the least soluble in water; yet, this study indicates that in an aqueous suspension, iron can be liberated from the goethite lattice. Further, it has been shown that photolysis can occur in a multiphase system at the sediment- water interface which results in an oxidation of the organic species and release of Fe2+ to solution where it becomes available for further reaction. ?? 1993.

Journal of Photochemistry and Photobiology A: Chem↗
USGS1992

A model of late quaternary landscape development in the Delaware Valley, New Jersey and Pennsylvania

In the Delaware Valley of New Jersey and eastern Pennsylvania the late Quaternary history of colluviation, fluvial adjustment, and soil formation is based on the ages of pre-Wisconsinan soils and glacial deposits which are indicated by feld relationships and inferred from mid-latitude climate changes indicated by marine oxygen-isotope records. The area is divided into four terranes characterized by sandstone, gneiss, slate and carbonate rocks. Since the last pre-Wisconsinan glaciation (> 130 ka, inferred to be late Illinoian), each terrane responded differently to chemical and mechanical weathering. During the Sangamon interglacial stage (∼ 130-75 ka) in situ weathering is inferred to have occurred at rates greater than transportation of material which resulted in the formation of deep, highly weathered soil and saprolite, and dissolution of carbonate rocks. Cold climatic conditions during the Wisconsinan, on the other hand, induced erosion of the landscape at rates faster than soil development. Upland erosion during the Wisconsinan removed pre-Wisconsinan soil and glacial sediment and bedrock to produce muddy to blocky colluvium, grézes litées, and alluvial fans on footslopes. Fluvial gravel and overlying colluvium in the Delaware Valley, both buried by late Wisconsinan outwash, are inferred to represent episodes of early and middle Wisconsinan (∼ 75-25 ka) upland erosion and river aggradiation followed by river degradation and colluvium deposition. Early-middle Wisconsinan colluvium is more voluminous than later colluvium despite colder, possibly permafrost conditions during the late Wisconsinan ∼ 25-10 ka). Extensive colluviation during the early and middle Wisconsinan resulted from a longer (50 kyr), generally cold interval of erosion with a greater availability of easily eroded pre-Wisconsinan surficial materials on uplands than during the late Wisconsinan. After recession of late Wisconsinan ice from its terminal position, soil formation and landscape stability were delayed until the Holocene by a lingering cold climate, slope erosion, colluvium and alluvial fan deposition, and eolian sedimentation. Late Quaternary erosion in the Delaware Valley was dominated by glacial and periglacial processes during glacial stages. During the warm interglacial stages, soils developed on a more stable landscape. These souls were easily colluviated by periglacial erosion during periods of intermittent cold climate.

Geomorphology↗
USGS2025

Seismic response of rock towers at the Trona Pinnacles (U.S.A.) to the 2019 Ridgecrest earthquake sequence: Theory, observations, and models

We analyze the seismic response of a class of fragile geologic features (FGFs), referred to as rock towers (RTs) at the Trona Pinnacles, a group of RTs in southern California that suffered strong shaking during the 2019 Ridgecrest earthquake sequence. FGFs, including RTs, may provide maximum constraints on past earthquake shaking intensity, and thereby support probabilistic seismic hazard assessments (PSHAs). In a rare case study, we explore the hypothesis that RT structural integrity is time dependent, as damage accumulates progressively. We develop finite‐element method (FEM) models of the RTs using photogrammetric shape models. We validate the models by comparing numerical simulations of their response to broadband ground shaking with low‐intensity seismic recordings obtained at the Pinnacles. Results of our simulations are in good agreement with the seismic recordings of actual earthquake aftershocks. We next use the results of the FEM models to analyze the response and evolution of RTs. Our analyses elucidate the influence of geometry over their seismic response, providing a rationale that may explain the rarity of slender RTs at Trona: high‐aspect‐ratio structures that respond in bending develop detrimental tensile stresses that crack the rock, whereas low‐aspect‐ratio ones’ response also includes shearing, which does not compromise material integrity as much as tension. Field measurements with a rebound hammer support this finding, suggesting that the material around the base of slender rocks has been weakened relative to other parts of the RT. We also study how to define simplified mechanical models (“archetypes”) to predict the natural frequencies of RTs. Results from our work illuminate the fundamental mechanisms of seismic response and progressive failure of RTs, and open new avenues of research to potentially incorporate these geologic features as long‐return period constraints on PSHA, in ways analogous to those of the widely used precariously balanced rocks.

California↗
USGS1970

Test of airborne fluorometer over land surfaces and geologic materials

Response of an experimental Fraunhofer line discriminator(FLD) to a wide range of surficial deposits common in deserts and semideserts was tested in the laboratory and from an 1-1-19 helicopter. By design the instrument sensed radiation from the ground specifically at the sodium D2 Fraunhofer line (5890 angstroms). It is capable of detecting a fluorescence component emanating from ground targets irradiated by sunlight along the line of flight, provided the aircraft is nearly level. However, no signals attributable to fluorescence were recorded during 540 miles of aerial traverses over southeastern California and west-central Arizona. It is concluded that exposed surfaces of target materials throughout the traverses were either non-luminescent at 5890 A or not sufficiently so to be detectable. It cannot be ruled out that the lack of fluorescence is partly attributable to surficial coatings of non-luminescent weathered material. The principal route surveyed from the air was from Needles, California to Furnace Creek Ranch, Death Valley and return via the Amargosa River valley, Silurian Lake (dry), Silver Lake (dry), and Soda Lake (dry). Principal targets traversed were unconsolidated elastic sediments ranging from silty clay to cobbles, and a wide range of evaporite deposits. Evaporite minerals thought to have been viewed in high concentrations are halite (sodium chloride), gypsum (hydrous calcium sulfate), probably other sulfate minerals, borax and probably ulexite (hydrous sodium borates), possibly colemanite (hydrous calcium borate), and probably some carbonate minerals. Extensive manganese-rich outcrops midway between Needles and Prescott had to be by-passed because of low sun-angles, cloudiness, and a heavy load in relation to altitude (above 5,000 feet). Several of the more common evaporite minerals were tested under the FLD on the ground, while being irradiated by bright sunlight. Minerals tested were chiefly from salt fiats (salars) in the Atacama Desert of northern Chile, and included halite, gypsum, ulexite, thenardite (sodium sulfate), aragonite (calcium carbonate) and nitrate ore containing soda niter (sodium nitrate). Crude oil from the Santa Barbara leak was tested in its natural state and in solutions of methyl-isobutyl-ketone (MIBK). Petroliferous sandstone samples containing both high and moderate concentrations of oil were tested on both fresh and weathered surfaces. No response definitely attributable to fluorescence at 5890 A was noted from any of the foregoing geologic materials, although a possible very weak response to one oil sample in MBK solution appears on the record. Although no fluorescence was detected, the mechanical operation of the FLD was satisfactory throughout 8 hours of flight, with attendant vibrations, and during a wide range of sun angles, from 13° to 33°. In accord with design, the FLD showed no appreciable response to moderate contrasts in reflectivity among targets, although there was a marked response to strong contrasts in reflectivity. Airborne tests also established that a minimum instrumental warm-up time of seven minutes is required, and that response is not entirely independent of either the vertical angle (tilt) or horizontal angle (flight direction) of the aircraft.

Open-File Report↗
USGS1992

An earthquake mechanism based on rapid sealing of faults

Recent seismological, heat flow and stress measurements in active fault zones such as the San Andreas have led to the suggestion 1,2 that such zones can be relatively weak. One explanation for this may be the presence of overpressured fluids along the fault 3–5 , which would reduce the shear stress required for sliding by partially 'floating' the rock. Although several mechanisms have been proposed for overpressurizing fault fluids 3,4,6,7 , we recall that 'pressure seals' are known to form in both sedimentary 8 and igneous 9 rocks by the redistribution of materials in solution; the formation of such a seal along the boundaries of a fault will prevent the communication of fluids between the porous, deforming fault zone and the surrounding country rock. Compaction of fault gouge, under hydrostatic loading and/or during shear, elevates pore pressure in the sealed fault and allows sliding at low shear stress. We report the results of laboratory sliding experiments on granite, which demonstrate that the sliding resistance of faults can be significantly decreased by sealing and compaction. The weakening that results from shear-induced compaction can be rapid, and may provide an instability mechanism for earthquakes.

Nature↗
USGS2016

Mountain building on Io driven by deep faulting

Jupiter’s volcanic moon Io possesses some of the highest relief in the Solar System: massive, isolated mountain blocks that tower up to 17   km above the surrounding plains. These mountains are likely to result from pervasive compressive stresses induced by subsidence of the surface beneath the near-continual emplacement of volcanic material. The stress state that results from subsidence and warming of Io’s lithosphere has been investigated in detail 1 , 2 , 3 , 4 ; however, the mechanism of orogenesis itself and its effect on regional tectonism and volcanism has not been firmly established. Here we present viscoelastic–plastic finite element simulations demonstrating that Io’s mountains form along deep-seated thrust faults that initiate at the base of the lithosphere and propagate upward. We show that faulting fundamentally alters the stress state of Io’s lithosphere by relieving the large volcanism-induced subsidence stresses. Notably, in the upper portion of the lithosphere, stresses become tensile (near-zero differential stress). A number of processes are therefore altered post-faulting, including magma transport through the lithosphere, interactions with tidal stresses and potentially the localization of mountain formation by thermoelastic stresses. We conclude that Io’s mountains form by a unique orogenic mechanism, compared with tectonic processes operating elsewhere in the Solar System.

Nature Geoscience↗
USGS2003

Effects of disturbance on contribution of energy sources to growth of juvenile chinook salmon (Oncorhynchus tshawytscha) in boreal streams

We used stable isotopes of carbon in a growth-dependent tissue-turnover model to quantify the relative contribution of autochthonous and terrestrial energy sources to juvenile chinook salmon (Oncorhynchus tshawytscha) in five small boreal streams tributary to the upper Yukon River. We used a tissue-turnover model because fish did not grow enough to come into isotopic equilibrium with their diet. In two streams, autochthonous energy sources contributed 23 and 41% to the growth of juvenile salmon. In the other three, fish growth was largely due to terrestrial (i.e., allochthonous) energy sources. This low contribution of autochthonous energy appeared to be related to stream-specific disturbances: a recent forest fire impacted two of the streams and the third was affected by a large midsummer spate during the study. These disturbances reduced the relative abundance of herbivorous macroinvertebrates, the contribution of autochthonous material to other invertebrates, and ultimately, the energy flow between stream algae and fish. Our findings suggest that disturbances to streams can be an important mechanism affecting transfer of primary energy sources to higher trophic levels.

Canadian Journal of Fisheries and Aquatic Sciences↗
USGS1990

Rheological analysis of fine-grained natural debris-flow material

Experiments were conducted on large samples of fine-grained material (???2mm) from a natural debris flow using a wide-gap concentric-cylinder viscometer. The rheological behavior of this material is compatible with a Bingham model at shear rates in excess of 5 sec. At lesser shear rates, rheological behavior of the material deviates from the Bingham model, and when sand concentration of the slurry exceeds 20 percent by volume, particle interaction between sand grains dominates the mechanical behavior. Yield strength and plastic viscosity are extremely sensitive to sediment concentration.

Conference Paper↗