USGS Science⌕ Search

USGS · ofr70316

Test of airborne fluorometer over land surfaces and geologic materials

Abstract

Response of an experimental Fraunhofer line discriminator(FLD) to a wide range of surficial deposits common in deserts and semideserts was tested in the laboratory and from an 1-1-19 helicopter. By design the instrument sensed radiation from the ground specifically at the sodium D2 Fraunhofer line (5890 angstroms). It is capable of detecting a fluorescence component emanating from ground targets irradiated by sunlight along the line of flight, provided the aircraft is nearly level. However, no signals attributable to fluorescence were recorded during 540 miles of aerial traverses over southeastern California and west-central Arizona. It is concluded that exposed surfaces of target materials throughout the traverses were either non-luminescent at 5890 A or not sufficiently so to be detectable. It cannot be ruled out that the lack of fluorescence is partly attributable to surficial coatings of non-luminescent weathered material. The principal route surveyed from the air was from Needles, California to Furnace Creek Ranch, Death Valley and return via the Amargosa River valley, Silurian Lake (dry), Silver Lake (dry), and Soda Lake (dry). Principal targets traversed were unconsolidated elastic sediments ranging from silty clay to cobbles, and a wide range of evaporite deposits. Evaporite minerals thought to have been viewed in high concentrations are halite (sodium chloride), gypsum (hydrous calcium sulfate), probably other sulfate minerals, borax and probably ulexite (hydrous sodium borates), possibly colemanite (hydrous calcium borate), and probably some carbonate minerals. Extensive manganese-rich outcrops midway between Needles and Prescott had to be by-passed because of low sun-angles, cloudiness, and a heavy load in relation to altitude (above 5,000 feet). Several of the more common evaporite minerals were tested under the FLD on the ground, while being irradiated by bright sunlight. Minerals tested were chiefly from salt fiats (salars) in the Atacama Desert of northern Chile, and included halite, gypsum, ulexite, thenardite (sodium sulfate), aragonite (calcium carbonate) and nitrate ore containing soda niter (sodium nitrate). Crude oil from the Santa Barbara leak was tested in its natural state and in solutions of methyl-isobutyl-ketone (MIBK). Petroliferous sandstone samples containing both high and moderate concentrations of oil were tested on both fresh and weathered surfaces. No response definitely attributable to fluorescence at 5890 A was noted from any of the foregoing geologic materials, although a possible very weak response to one oil sample in MBK solution appears on the record. Although no fluorescence was detected, the mechanical operation of the FLD was satisfactory throughout 8 hours of flight, with attendant vibrations, and during a wide range of sun angles, from 13° to 33°. In accord with design, the FLD showed no appreciable response to moderate contrasts in reflectivity among targets, although there was a marked response to strong contrasts in reflectivity. Airborne tests also established that a minimum instrumental warm-up time of seven minutes is required, and that response is not entirely independent of either the vertical angle (tilt) or horizontal angle (flight direction) of the aircraft.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

George Eimert Stoertz, William R. Hemphill. 1970. Test of airborne fluorometer over land surfaces and geologic materials. https://doi.org/10.3133/ofr70316

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗