USGS ScienceSearch

SEARCH · USGS Science

Results for “Geological Society of America Bulletin, Part I”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources

The Uralides and the motion of the Russian and Siberian Platforms

The Uralides—the late Precambrian and Paleozoic orogenic terrane between the Russian and Siberian Platforms—in part are exposed in the Ural Mountains, in the central Soviet Arctic, along the west edge of the Siberian Platform, and in southern Siberia and Kazakhstan, and in part are buried beneath the fill of the West Siberian Lowlands and other basins. Paleomagnetic orientations suggest that the Russian and Siberian Platforms were far apart during the early Paleozoic, converged during the middle Paleozoic, and collided in the Permian or Triassic. The geology of the Uralides accords with the concept that the two subcontinents approached and collided as the intervening oceanic plate slid beneath them along subduction (Benioff) zones. The medial eugeosyncline of the Uralides consists largely of what may be oceanic material scraped off against the edges of the opposed subcontinents. Basalt-and-spilite belts may represent ocean-floor abyssal tholeiite, and the manganiferous cherts and other sediments upon them may be pelagic oozes. Andesite belts may have formed as island arcs within the ocean, swept subsequently against the continents. Fossil subduction zones are recorded by great faults soled by, or containing tectonic injections of, mafic and ultramafic rocks from the lower oceanic crust and upper mantle, and containing high-pressure metamorphic rocks. Granitic and silicic-volcanic rocks may have formed above the subduction zones in the accreted parts of the continental plates. Both these continental-margin magmatic rocks and the island-arc complexes display ratios of potassium to silicon that vary across strike and so indicate the directions of dip of the subduction zones. From the distribution of such indicators of various ages, a history of the continental margins can be deduced. An active subduction zone dipped beneath the Siberian Platform during at least parts of late Precambrian and early, middle, and late Paleozoic time. The late Precambrian and Cambrian history of the Russian side is unclear, but in the Ordovician and Silurian the Russian continental margin was stable, while somewhere offshore an island arc was present whose trench was on the Russian side; the last of the intervening oceanic plate vanished down the subduction zone in about the Early Devonian, and the island arc became part of the continental margin. During the remainder of the Devonian and during the Carboniferous and Early Permian, a subduction zone was present along the margin of the enlarged Russian continent and dipped beneath it. Each subcontinent grew oceanward as oceanic material was accreted against it, and the subduction zones stepped oceanward correspondingly. The continental magmatic zones migrated oceanward behind the accreting edges of the continental plates, so the tectonic and magmatic progression with time at any one place is analogous to the variations present across the entire orogenic belt at any one time. Severe right-lateral deformation of the Uralides, the Russian side having moved northward relative to the Siberian side during Mesozoic and early Cenozoic time, is inferred from structural and magnetic-anomaly patterns. The deformation was accomplished by oroclinal folding, strike-slip faulting, and tensional thinning of the crust. The Uralides may have been continuous in early Mesozoic time with the Ellesmerides of North Greenland and the Canadian Arctic islands. The Cenozoic (and late Mesozoic?) opening of the Arctic Ocean was accomplished by spreading of the Eurasia Basin, and by opening of the Canada Basin behind a counterclockwise-rotating Alaska.

Siberia, Ural Mountains

Variations in lead-isotopic compositions in Mesozoic granitic rocks of California: A preliminary investigation

Six alkali feldspar and two whole-rock samples of granitic rocks from the Sierra Nevada batholith and adjacent Klamath Mountains were analyzed for their lead-isotope compositions. The samples represented each of three 87 Sr/ 86 Sr groupings (< 0.704, 0.704 to 0.706, and > 0.706) for granitic rocks north of the Garlock fault in California. The isotopic compositions of lead in the samples from the Sierra Nevada batholith range from 18.73 to 19.37 for 206 Pb/ 204 Pb, 15.61 to 15.71 for 207 Pb/ 204 Pb, and 38.44 to 39.10 for 208 Pb/ 204 Pb. A crude parallel correspondence was found between lead and strontium isotopes, in that the specimens with the most radiogenic strontium also tend to have the most radiogenic lead similar to the previously studied Boulder batholith of Montana. A parallel correspondence is thought to imply characteristics of the source rocks for the plutons rather than consequences of partial melting or natural contamination. Lead-isotopic compositions for the Sierra Nevada batholith and the Boulder batholith differ, average values of 206 Pb/ 204 Pb being at least 18.8 for the Sierra Nevada batholith and about 18 for the Boulder batholith. In the Late Cretaceous part of the Sierra Nevada batholith, the secondary isochron “age” for the lead data in these rocks is about 2,900 m.y., far older than known Precambrian in California. Sources are proposed for these plutons from the lower continental crust and upper continental mantle or dominantly recycled continental materials, probably of intermediate composition and possibly carried down to the zone of melting by subduction. This source material may have been formed in Pre-cambrian times but did not undergo a Precambrian metamorphism greater than upper amphibolite facies which would have reduced the values of 238 U/ 204 Pb in the source rocks and resulted in Mesozoic leads like those found in the Boulder batholith and elsewhere in the Rocky Mountain region. A trondhjemite from the Klamath Mountains has a lead-isotope composition ( 206 Pb/ 204 Pb, 18.57; 207 Pb/ 204 Pb, 15.50; 208 Pb/ 204 Pb, 38.08) similar to that of oceanic volcanic rocks, particularly like those of island volcanics on oceanic ridges. Derivation of this trondhjemite from an oceanic mantle or recycled mantle material is indicated by this observation and supports the conclusion of Kistler and Peterman (1973) based on its alkali abundances and 87 Sr/ 86 Sr value.

California

Relation of landslides triggered by the Kiholo Bay earthquake to modeled ground motion

The 2006 Kiholo Bay, Hawaii, earthquake triggered high concentrations of rock falls and slides in the steep canyons of the Kohala Mountains along the north coast of Hawaii. Within these mountains and canyons a complex distribution of landslides was triggered by the earthquake shaking. In parts of the area, landslides were preferentially located on east‐facing slopes, whereas in other parts of the canyons no systematic pattern prevailed with respect to slope aspect or vertical position on the slopes. The geology within the canyons is homogeneous, so we hypothesize that the variable landslide distribution is the result of localized variation in ground shaking; therefore, we used a state‐of‐the‐art, high‐resolution ground‐motion simulation model to see if it could reproduce the landslide‐distribution patterns. We used a 3D finite‐element analysis to model earthquake shaking using a 10 m digital elevation model and slip on a finite‐fault model constructed from teleseismic records of the mainshock. Ground velocity time histories were calculated up to a frequency of 5 Hz. Dynamic shear strain also was calculated and compared with the landslide distribution. Results were mixed for the velocity simulations, with some areas showing correlation of landslide locations with peak modeled ground motions but many other areas showing no such correlation. Results were much improved for the comparison with dynamic shear strain. This suggests that (1) rock falls and slides are possibly triggered by higher frequency ground motions (velocities) than those in our simulations, (2) the ground‐motion velocity model needs more refinement, or (3) dynamic shear strain may be a more fundamental measurement of the decoupling process of slope materials during seismic shaking.

Hawai'i

Similarities between the thick-skinned Blue Ridge anticlinorium and the thin-skinned Powell Valley anticline

The Blue Ridge anticlinorium in northern Virginia is a part of an integrated deformational system spanning the area from the Piedmont to the Appalachian Plateaus. Deformation intensity within the system decreases from east to west. Differences of opinion have emerged concerning the central Appalachians as to whether the basement rocks exposed in the core of the Blue Ridge anticlinorium are rooted or are allochthonous. Available surface and subsurface stratigraphic and structural data suggest that the anticlinorium may be a rootless thick-skinned analogue to the rootless thin-skinned Powell Valley anticline in the Valley and Ridge. Both structures were produced during the Alleghenian orogeny by similar deformational processes. The form of the Powell Valley anticline is attributed to duplication of about 4,575 m (15,000 ft) of sedimentary rock during approximately 16 km (10 mi) of northwest movement above a subhorizontal décollement. Similarly, the form of the Blue Ridge anticlinorium is attributed to duplication of about 9,150 m (30,000 ft) of igneous, metamorphic, and sedimentary rock during a minimum of 59 km (37 mi) of northwest movement above an eastward continuation of a subhorizontal décollement within Cambrian sedimentary rocks beneath the Valley and Ridge. Thus, in northern Virginia there is a mixing of structural styles: the thick-skinned rootless Blue Ridge anticlinorium sits above a thin-skinned detachment. This relationship implies that thin- and thick-skinned styles are simply end members of a complex deformational process that includes a transition zone, where characteristics of both styles commingle. © 1979 Geological Society of America.

Virginia

Sierra Nevada plutonic cycle: Part I, origin of composite granitic batholiths

Intrusion of Mesozoic batholiths in California and the western North America Cordillera began in the Late Triassic 210 m.y. ago and ended in the Late Cretaceous 80 m.y. ago. Emplacement of granitic rocks was apparently not continuous but was accomplished during five major epochs of intrusion at approximately 30 m.y. intervals, each epoch taking 10 to 20 m.y. to complete. A progressive transgression of epicontinental seas onto the midcontinent occurred during the same interval of time as the batholithic emplacement to the west. A penecontemporaneous deformation near the loci of granitic emplacement and a temporary regression during the major progressive transgression of seas onto the midcontinent are correlated with each intrusive epoch. The locus of Mesozoic granitic rocks was a source of sediments during most of the period of time required to emplace the batholiths; the origin of the batholithic magmas cannot be related only to localized down-warping of geosynclines. The source of the major proportion of the mobile granodioritic magmas of the Sierra Nevada was within the mantle, as is indicated by Sr isotope data. All plutons now exposed in the Sierra Nevada, whether of Cretaceous age or older, were emplaced at depths of a very few kilometers, the shallowest having been emplaced at depths of 4 km or less. The spatial relationships among these synchronous geologic phenomena and the geochemical and geophysical data from the same region are accounted for by a northwestward drift of North America in the region of the western Cordillera of the United States onto and across a Mesozoic feature that had characteristics like present-day oceanic rises.

California

On the characteristics of local geology and their influence on ground motions generated by the Loma Prieta earthquake in the San Francisco Bay region, California

Strong ground motions recorded at 34 sites in the San Francisco Bay region from the Loma Prieta earthquake show marked variations in characteristics dependent on crustal structure and local geological conditions. Peak horizontal acceleration and velocity inferred for sites underlain by “rock” generally occur on the transverse component of motion. They are consistently greater with lower attenuation rates than the corresponding mean value predicted by empirical curves based on previous strong-motion data. Theoretical amplitude distributions and synthetic seismograms calculated for 10-layer models suggest that “bedrock” motions were elevated due in part to the wide-angle reflection of S energy from the base of a relatively thin (25 km) continental crust in the region. Characteristics of geologic and geotechnical units as currently mapped for the San Francisco Bay region show that average ratios of peak horizontal acceleration, velocity and displacement increase with decreasing mean shear-wave velocity. Ratios of peak acceleration for sites on “soil” (alluvium, fill/Bay mud) are statistically larger than those for sites on “hard rock” (sandstone, shale, Franciscan Complex). Spectral ratios establish the existence of predominant site periods with peak amplifications near 15 for potentially damaging levels of ground motion at some sites underlain by alluvium and fill/bay mud. Average spectral amplifications inferred for vertical and the mean horizontal motion are, respectively, (1,1) for sites on the Franciscan Complex (KJf), (1.4, 1.5) for sites on Mesozoic and Tertiary rocks (TMzs), (2.1, 2.0) for sites on the Santa Clara Formation (QTs), (2.3, 2.9) for sites on alluvium (Qal), and (2.1, 4.0) for sites on fill/Bay mud (Qaf/Qhbm). These mean values are not statistically different at the 5% significance level from those inferred from previous low-strain data. Analyses suggest that soil amplification and reflected crustal shear energy were major contributors to levels of ground motion sufficient to cause damage to vulnerable structures at distances near 100 km in the cities of San Francisco and Oakland.

California

Relationship of the 1999 Hector Mine and 1992 Landers fault ruptures to offsets on neogene faults and distribution of late Cenozoic basins in the eastern California shear zone

This report examines the Hector Mine and Landers earthquakes in the broader context of faults and fault-related basins of the eastern California shear zone (ECSZ). We compile new estimates of total strike-slip offset (horizontal separation) at nearly 30 fault sites based on offset magnetic anomaly pairs. We also present a map of the depth to pre-Cenozoic basement rock (thickness of basin-filling late Cenozoic deposits) for the region, based on an inversion of gravity and geologic data. Our estimates of total long-term strike-slip offsets on faults that slipped during the 1999 Hector Mine (3.4 km), and the 1992 Landers earthquakes (3.1 ? to 4.6 km) fall within the 3- to 5-km range of total strike-slip offset proposed for most faults of the western ECSZ. Faults having offsets as great as 20 km are present in the eastern part of the ECSZ. Although the Landers rupture followed sections of a number of faults that had been mapped as independent structures, the similarity in total strike-slip offset associated with these faults is compatible with one of the following hypotheses: (1) the Landers multistrand rupture is a typical event for this linked fault system or (2) this complex rupture path has acted as a coherent entity when viewed over some characteristic multiearthquake cycle. The second hypothesis implies that, for each cycle, slip associated with smaller earthquakes on individual fault segments integrates to a uniform slip over the length of the linked faults. With one exception, the region surrounding the Hector Mine and Landers ruptures is devoid of deep late Cenozoic basins. In particular, no deep basins are found immediately north of the Pinto Mountain fault, a place where a number of kinematic models for development of the ECSZ have predicted basins. In contrast, some basins exist near Barstow and along the eastern part of the ECSZ, where the model of Dokka et al. (1998) predicts basins.

Bulletin of the Seismological Society of America

40Ar/39Ar age of the Manson impact structure, Iowa, and correlative impact ejecta in the Crow Creek member of the Pierre Shale (Upper Cretaceous), South Dakota and Nebraska

A set of 34 laser total-fusion 40 Ar/ 39 Ar analyses of sanidine from a melt layer in crater-fill deposits of the Manson impact structure in Iowa has a weighted-mean age of 74.1 ± 0.1 Ma. This age is about 9.0 m.y. older than 40 Ar/ 39 Ar ages of shocked microcline from the Manson impact structure reported previously by others. The 74.1 Ma age of the sanidine, which is a melt product of Precambrian microcline clasts, indicates that the Manson impact structure played no part in the Cretaceous-Tertiary (K-T) mass extinction at 64.5 Ma. Moreover, incremental-heating 40 Ar/ 39 Ar ages of the sanidine show that it is essentially free of excess 40 Ar and has not been influenced by postcrystallization heating or alteration. An age spectrum of the matrix of the melt layer shows effects of 39 Ar recoil, including older ages in the low-temperature increments and younger ages in the high-temperature increments. At 17 places in eastern South Dakota and Nebraska, shocked quartz and feldspar grains are concentrated in the lower part of the Crow Creek Member of the Pierre Shale (Upper Cretaceous). The grains are largest (3.2 mm) in southeastern South Dakota and decrease in size (0.45 mm) to the northwest, consistent with the idea that the Manson impact structure was their source. The ubiquitous presence of shocked grains concentrated in a thin calcarenite at the base of the Crow Creek Member suggests it is an event bed recording an instant of geologic time. Ammonites below and above the Crow Creek Member limit its age to the zone of Didymoceras nebrascense of earliest late Campanian age. Plagioclase from a bentonite bed in this zone in Colorado has a 40 Ar/ 39 Ar age of 74.1 ± 0.1 Ma commensurate with our sanidine age of 74.1 Ma for the Manson impact structure. 40 Ar/ 39 Ar ages of bentonite beds below and above the Crow Creek are consistent with our 74.1 ± 0.1 Ma age for the Manson impact structure and limit its age to the interval ±74.5 0.1 to 73.8 ± 0.1 Ma. Recently, two origins for the Crow Creek have been proposed—eastward transgression of the Late Cretaceous sea and a Manson impact-triggered tsunami. We conclude that most data are in accord with an impact origin for the Crow Creek Member and are at odds with the marine transgression hypothesis.

Iowa, Nebraska, South Dakota

Aeromagnetic mapping of the structure of Pine Canyon caldera and Chisos Mountains intrusion, Big Bend National Park, Texas

Analysis of aeromagnetic and gravity data reveals new details of the structure, igneous geology, and temporal evolution of the prominent, enigmatic ca.32 Ma Pine Canyon caldera and the Chisos Mountains (Big Bend National Park, Texas). The main caldera-filling Pine Canyon Rhyolite, the oldest member of the South Rim Formation, is reversely magnetized, allowing it to be used as a key marker bed for determining caldera fill thickness. Modeling of gravity and magnetic anomalies indicates that the Pine Canyon Rhyolite is probably thicker in the northeastern part of the caldera. Lineaments in the magnetic data suggest the presence of buried faults beneath the caldera that may have led to increased downdrop in the northeast versus the southwest, allowing a thicker section of caldera fill to accumulate there. The Pine Canyon caldera has been interpreted as a downsag caldera because it lacks surficial faulting, so these inferred faults are the first mapped features there that could be responsible for caldera collapse. The caldera boundary correlates well with the margins of a gravity low. General features of the caldera match well with basic models of downsag calderas, meaning that the Pine Canyon caldera may be a classic example of downsagging, of which few well-described examples exist, in terms of a geophysical signature. The source of a long-wavelength magnetic high over the Chisos Mountains is interpreted as a previously unknown broad intrusion, the long axis of which trends parallel to a major crustal boundary related to the Ouachita orogeny or an even earlier Precambrian margin. This feature represents the largest intrusion (28-34 km diameter, 1-4 km thick, 700-3000 km3 in volume) in an area where relatively small laccoliths are ubiquitous. The intrusion most likely represents a long-lived (>1 m.y.) reservoir replenished by small batches of magma of varying composition, as reflected in the variation of eruptive products from the Pine Canyon and Sierra Quemada calderas. The intrusion may represent the easternmost occurrence of voluminous Tertiary magmatism in the southwestern United States. ?? 2007 Geological Society of America.

Geological Society of America Bulletin

Accounting for site effects in probabilistic seismic hazard analyses of southern California: Overview of the SCEC Phase III Report

This article presents an overview of the Southern California Earthquake Center (SCEC) Phase-III effort to determine the extent to which probabilistic seismic hazard analysis (PSHA) can be improved by accounting for site effects. The contributions made in this endeavor are represented in the various articles that compose this special issue of BSSA. Given the somewhat arbitrary nature of the site-effect distinction, it must be carefully defined in any given context. With respect to PSHA, we define the site effect as the response, relative to an attenuation relationship, averaged over all damaging earthquakes in the region. A diligent effort has been made to identify any attributes that predispose a site to greater or lower levels of shaking. The most detailed maps of Quaternary geology are not found to be helpful; either they are overly detailed in terms of distinguishing different amplification factors or present southern California strong-motion observations are inadequate to reveal their superiority. A map based on the average shear-wave velocity in the upper 30 m, however, is found to delineate significantly different amplification factors. A correlation of amplification with basin depth is also found to be significant, implying up to a factor of two difference between the shallowest and deepest parts of the Los Angeles basin. In fact, for peak acceleration the basin-depth correction is more influential than the 30-m shear-wave velocity. Questions remain, however, as to whether basin depth is a proxy for some other site attribute. In spite of these significant and important site effects, the standard deviation of an attenuation relationship (the prediction error) is not significantly reduced by making such corrections. That is, given the influence of basin-edge-induced waves, subsurface focusing, and scattering in general, any model that attempts to predict ground motion with only a few parameters will have a substantial intrinsic variability. Our best hope for reducing such uncertainties is via waveform modeling based on first principals of physics. Finally, questions remain with respect to the overall reliability of attenuation relationships at large magnitudes and short distances. Current discrepancies between viable models produce up to a factor of 3 difference among predicted 10% in 50-yr exceedance levels, part of which results from the uncertain influence of sediment nonlinearity.

California

Petrology of Newberry Volcano, central Oregon

Note: This paper is dedicated to Aaron and Elizabeth Waters on the occasion of Dr. Waters' retirement. The eastern flank of the central and southern Cascade Mountains is bordered by a belt of shield volcanoes that appears to be a subprovince of the Oregon high-alumina plateau basalt petrologic province. Most of the volcanoes in this belt are low shields in which differentiation from the parent high-alumina basalt magma has been relatively slight, but several are large complex shield centers where differentiation has been extreme. The location of these large centers, and of some of the smaller volcanoes as well, was largely determined by intersecting concentrations of faults and fault-fissures of three regional fault systems. One of the largest of the complex volcanic centers is Newberry Volcano in central Oregon, a shield volcano with a big caldera at its summit. The stratigraphy of the caldera walls and of features on the caldera floor at Newberry allows detailed interpretation of the history of the younger parts of the volcano and caldera. The formation of Newberry Caldera was apparently a slow process controlled largely by faulting along the three regional fault systems. The magma conduits were probably a gridlike plexus of intersecting dikes and fissures, with larger “magma pockets” at the grid intersections. The magma was trapped in shallow chambers and periodically released by faulting. The entrapment of the magma allowed differentiation in the shallow chambers. The stratigraphy and petrology of the wall sequence also allows determination of the relative time at which the caldera had grown large enough to hold a caldera lake. On differentiation plots, chemical analyses of the Newberry rocks show two trends: rocks erupted before the presence of a lake in the caldera trend toward slight iron enrichment, whereas rocks erupted after water was present in the caldera generally trend toward alkali enrichment. These different trends are attributed to differences in the oxygen fugacity of the magma which, in turn, are related to the presence or absence of large volumes of water in the caldera lake. The interpretation is supported by field, petrographic, petrologic, chemical, trace-element, and isotopic data. Plots of existing data for the Medicine Lake Highland Volcano, another large complex shield center in the belt, show the same type of two-trend relation as those of Newberry Volcano.

Oregon

Paleoecology of an early oligocene biota from Douglass Creek Basin, Montana

Douglass Creek basin lies west of the Continental Divide in the northern part of the Rocky Mountain physiographic province. Numerous minor environmental differences exist between the Douglass Creek area and the Pipestone Springs and Canyon Ferry areas east of the Divide. In the 19th century, however, the three areas had identical mammalian species representation, although not equally dense populations. Fossils of an early Oligocene biota have been collected from the Douglass Creek basin . Presence of all but one of the Douglass Creek mammalian species in the Pipestone Springs-Canyon Ferry early Oligocene fauna suggests that the three ancient ecosystems resembled each other in much the same way as the 19th century systems. The early Oligocene deposits and biota of the Douglass Creek basin indicate a moist, temperate climate with seasonal variations. Sediment size and distribution suggest that the cross-valley relief was no greater than it is now. The fish and invertebrate faunas show that a shallow, hard-water lake existed in the area. The flora included a lowland, lake-border association and an upland coniferous forest. Although the ancient Douglass Creek biota doubtless included many species not represented in the fossil collections, most of the mammalian species are probably represented in the combined Douglass Creek , Pipestone Springs, and Canyon Ferry fossil assemblages. If so, the number of mammalian species was about the same as in the 19th century ecosystem.

Montana

Correlations and problems in belt series stratigraphy, Northern idaho and western Montana

A continuous strip of geologic maps has recently been completed along the Idaho - Montana state line between Clark Fork, Idaho , and Superior, Montana . New stratigraphic and petrographic information provides the basis for stratigraphic correlations and for the interpretation of facies changes in this part of the basin of deposition of the Precambrian Belt Series . Identification of facies changes is aided by the recognition of siltite (low-grade metamorphosed siltstone) as a valid rock type, in addition to quartzite and argillite, to classify most of these rocks and to establish mappable units. The older Belt rocks (Prichard through Wallace Formations) were deposited in a trough whose axis trended northwestward, perhaps approximately through Libby, Montana . Subtle facies changes suggest an ancient shore line southwest of the Coeur d'Alene district, Idaho , perhaps near the present exposed edge of the Idaho batholith. The younger Belt formations of the Missoula Group, however, thicken markedly southeastward toward Superior. Thus, the younger Belt rocks were deposited in a trough whose main axis was about at right angles to that of the older trough and perhaps was near Missoula, Montana . Deposition in the Clark Fork area was scant and often interrupted in Missoula time. The young major cross-warp in the old Belt geosyncline undoubtedly has contributed complexities to Belt correlation farther north. Detailed petrographic studies indicate that the Belt rocks from the Pend Oreille area, Idaho , are remarkably uniform in the mineralogic composition of similar rock types throughout 40,000 feet of strata. Further mineralogic studies are required to determine whether this uniformity is local or widespread.

Idaho, Montana

Early arc development recorded in Permian–Triassic plutons of the northern Mojave Desert region, California, USA

Permian–Middle Triassic plutons in the northern Mojave Desert, USA, are emplaced into the cryptic El Paso terrane, which is characterized by a northwest-striking belt of deep marine eugeoclinal strata juxtaposed against Proterozoic basement and its miogeoclinal cover. Fourteen new zircon U-Pb ages from the El Paso Mountains and Lane Mountain region of the Mojave Desert record nearly continuous magmatism occurring between ca. 275 and 240 Ma. These ages, which are taken to record the onset of subduction-related magmatism along the southwestern Laurentian margin, are older than the earliest arc plutons documented in the southern Sierra Nevada region to the north and in the Transverse Ranges to the south. They overlap, however, with Permian arc plutons documented in Sonora, Mexico. Dated plutons are compositionally variable, but can be characterized as intermediate to felsic, calcic to calc-alkalic, and having chemistries consistent with generation in an arc setting. Whole rock Sr-Nd isotopic compositions vary widely from relatively primitive (Sr i = 0.7035, initial εNd = +3, initial εHf in zircon = +13) to moderately evolved (Sr i = 0.708, initial εNd = –5, initial εHf in zircon = –3). Isotopic signatures differ considerably from partially coeval Triassic suites of the Transverse Ranges and central Mojave, which are more evolved and consistent with emplacement in Proterozoic continental crust of the Mojave province. They also differ considerably from those typical of intermediate plutons generated in intra-oceanic arcs, which are overall much more mantle-like. This suggests that the underpinnings of the El Paso terrane may be at least partly composed of continental crust and that magmas emplaced into the terrane may have been variably contaminated by crustal components. This is supported by the presence of Precambrian and early Paleozoic zircon inheritance recorded in some plutons. In all isotopic systems, values are the most evolved in the oldest plutons (ca. 275–270 Ma), becoming more juvenile in the Middle Triassic. These temporal trends, together with pluton fabrics and new estimates of Permian plate vectors, are interpreted to reflect generation of the earliest arc in a contractional setting that may have driven crustal thickening and a greater involvement of crustal materials in Permian magmas. This result supports a model of forced subduction initiation, which is favored by a change in plate motions along a previously weak margin, and predicts an initial compressive state in the upper plate. The uniformly primitive signatures of Triassic melts are taken to indicate a change to a transtensional upper-plate stress regime that promoted the development of more voluminous, primarily mantle-derived melts. Regional pluton age patterns suggest that arc magmatism initiated in restricted areas of the southwestern Laurentian margin (northern Mojave, Sonora) and then migrated north and south ultimately becoming a continuous arc by Jurassic time.

California

Shallow structure and geomorphology along the offshore northern San Andreas Fault, Tomales Point to Fort Ross, California

We mapped a poorly documented 35-km-long section of the northern San Andreas fault zone (NSAF) between Tomales Point and Fort Ross, California. Mapping is largely based on high-resolution seismic-reflection profiles (38 fault crossings), multibeam bathymetry, and onshore geology. NSAF strike in this section is nearly parallel to plate motion, characterized by a slight (~2°) northerly (transtensional) bend in the south between Tomales Bay and the Bodega isthmus, and a northwesterly (transpressional) ~5° bend in the north between the Bodega isthmus and Fort Ross. The southern transtensional bend is the northern part of the now-submerged, linear, ~50-km-long and 1- to 2-km-wide, "Tomales-Bodega valley." The valley floor is cut by a complex zone of subparallel, variably continuous fault strands and the deformed valley fill is an inferred mix of late Quaternary marine and nonmarine strata. In the northern part of this elongate valley, Holocene fault offset occurred on two fault strands about 740 m apart. The northern transpressional bend is characterized by narrow, elongate, asymmetric basins containing as much as 56 m of inferred latest Pleistocene to Holocene sediment. Between Bodega Head and Fort Ross, the gently dipping (~0.8°) shelf includes two large (4.8 and 5.9 km2) zones of sediment failure that we speculatively correlate with the 1906 San Francisco NSAF earthquake. Similar sediment-failure zones should be common along offshore reaches of the NSAF and other nearshore fault zones, but have apparent limited preservation potential. Onland geomorphic impacts of the mainly offshore NSAF include: (1) Northward upwarping of uplifted marine terraces in the transpressional zone north of Bodega Bay; and (2) Blocking of littoral sediment transport by uplifts on the west flank of the NSAF at Bodega Head and Tomales Point, resulting in rapidly accreting beaches and large coastal sand dune complexes.

California

Mesozoic and Cenozoic tectonics of the eastern and central Alaska Range: Progressive basin development and deformation in a suture zone

Analysis of late Mesozoic and Cenozoic sedimentary basins, metamorphic rocks, and major faults in the eastern and central Alaska Range documents the progressive development of a suture zone that formed as a result of collision of an island-arc assemblage (the Wrangellia composite terrane) with the former North American continental margin. New basin-analysis, structural, and geochronologic data indicate the following stages in the development of the suture zone: (1) Deposition of 3-5 km of Upper Jurassic-Upper Cretaceous marine strata (the Kahiltna assemblage) recorded the initial collision of the island-arc assemblage with the continental margin. The Kahiltna assemblage exposed in the northern Talkeetna Mountains represents a Kimmeridgian-Valanginian backarc basin that was filled by northwestward-flowing submarine-fan systems that were transporting sediment derived from Mesozoic strata of the island-arc assemblage. The Kahiltna assemblage exposed in the southern Alaska Range represents a Valanginian-Cenomanian remnant ocean basin filled by west-southwestward-flowing submarine-fan systems that were transporting sediment derived from Paleozoic continental-margin strata uplifted in the along-strike suture zone. A belt of retrograde metamorphism and a regional anticlinorium developed along the continental margin from 115 to 106 Ma, roughly coeval with the end of widespread deposition in the Kahiltna sedimentary basins. (2) Metamorphism of submarine-fan deposits of the Kahiltna basin, located near the leading edge of the island-arc assemblage, occurred at ca. 74 Ma, as determined from a new U-Pb zircon age for a synkinematic sill. Coeval with metamorphism of deposits of the Kahiltna basin in the southern part of the suture zone was development of a thrust-top basin, the Cantwell basin, in the northern part of the suture zone. Geologic mapping and compositional data suggest that the 4 km of Upper Cretaceous nonmarine and marginal marine sedimentary strata in this basin record regional subaerial uplift of the suture zone. (3) Shortening and exhumation of the suture zone peaked from 65 to 60 Ma on the basis of metamorphic and geochronologic data. In the southern part of the suture zone, submarine-fan deposits of the Kahiltna basin, which had been metamorphosed to kyanite schists at ???25 km depth and ???650 ??C, were exhumed and cooled through the biotite closure temperature (???300 ??C) by ca. 62 Ma. In the northern part of the suture zone, this time period was marked by shortening, uplift, and erosion of sedimentary strata of the Cantwell basin. (4) From 60 to 54 Ma, ???3 km of volcanic strata were deposited over deformed sedimentary strata of the Cantwell basin, and several granitic plutons (the McKinley sequence) were emplaced along the suture zone. (5) Following igneous activity, strikeslip displacement occurred from ca. 54 to 24 Ma along the Denali fault system, which had developed in the existing suture zone. Late Eocene-Oligocene strike-slip displacement resulted in the formation of several small sedimentary basins along the Denali fault system. (6) Regional transpressive shortening characterized the suture zone from ca. 24 Ma to the present. Flexural subsidence, related to regional shortening, is represented by late Eocene to Holocene nonmarine deposits of the Tanana foreland basin. Regional subsidence resulted in Miocene coal seams up to 20 m thick and well-developed lacustrine deposits. Overlying the Miocene deposits are ???1.2 km of Pliocene and Holocene conglomeratic deposits. Compositional and paleocurrent data from these younger deposits record regional Neogene uplift of the suture zone and recycling of detritus from older basins to the south that had become incorporated into the uplifted suture zone. Geologic mapping of major thrust faults along the northern and southern margins of the suture zone documents Paleozoic strata thrust over both Pliocene fluvial deposits and Quaternary glacial deposits of the Tanana basin.

Geological Society of America Bulletin

The Mount Evans batholith in the Colorado Front Range: Revision of its age and reinterpretation of its structure

The Mount Evans batholith, in the central Front Range of Colorado, is composed of a main phase of massive to conspicuously foliated monzogranite and granodiorite and undeformed aplite and pegmatite. The Mount Evans batholith was previously considered to be part of the 1.7 Ga Routt Plutonic Suite. New U-Pb zircon ages on four samples (granodiorite, monzogranite, and granite), however, indicate that the batholith was emplaced at 1,442 ± 2 Ma and belongs to the Berthoud Plutonic Suite. Most of the batholith has igneous textures and structures, except in the vicinity of the Idaho Springs-Ralston shear zone where those features are tectonically recrystallized and foliated. Foliation elsewhere in the batholith is a flow structure. Zircons in two granodiorite samples, collected near the shear zone (just south of the Colorado Mineral Belt), are reversely discordant by about 0.8%-2.1%, with a considerable spread in 207 Pb/ 206 Pb ages. Many of the zircons from these samples contain apatite, K-feldspar, and quartz inclusions that appear to replace zircon along cracks and imperfections from rim to core. We suggest that these inclusions formed during a Laramide ore-forming event and incorporated Early and Middle Proterozoic radiogenic lead scavenged from the country rock. The excess radiogenic lead caused the scatter and reverse discordance in the data. The Mount Evans batholith is anomalous in composition and structure compared to most other 1.4 Ga plutons of the southwestern United States. The differences probably reflect different sources of partial melting; the specific tectonic setting where rocks of such disparate origin are temporally and spatially juxtaposed is not understood.

Colorado

Trans-Andean geophysical profile, southern Colombia

Negative Bouguer anomalies (−80 mgals) near the Pacific coast of southern Colombia define the position of the Tertiary Bolívar trough. Values increase eastward to a huge positive anomaly (+75 mgals) over Mesozoic “eugeosynclinal” rocks of the western Andes. This anomaly is part of the West Colombian gravity high, which extends from Panamá into western Ecuador and is caused by shallow mafic crust. Bouguer anomalies are strongly negative (−220 mgals) over pre-Mesozoic(?) metamorphic rocks, Mesozoic(?) granitic bodies, and Tertiary to Holocene volcanic rocks of the central Andes between Pasto and Ipiales. The steep gravity gradient between the West Colombian gravity high and the negative anomaly of the central Andes represents the transition between mafic crust to the west and continental crust to the east. This zone parallels the Romeral-Cauca megashear system. East of the Andes, Bouguer anomalies range from −50 to −120 mgals over a Mesozoic-Tertiary basin of the Putumayo district, indicating that the crust there is thinner or denser than it is beneath the central Andes. Models derived from gravity data suggest that the crust is about 45 km thick under the south-central Colombian Andes. If this is correct, the crust must thicken southward along the strike of the Andes, as thicknesses of 70 km have been reported in the Andes of southern Perú, Bolivia, and northern Chile by Lomnitz (1962) and James (1971a). Such differing crustal thicknesses may reflect different intensities of tectonic activity, greater crustal thickness indicating more intense or rapid growth of the volcano-plutonic arc or foreshortening of an existing crustal section.

Geological Society of America Bulletin