Observations of quasistatic fault growth from acoustic emissions

Abstract

The location of acoustic emission (AE) sources during deformation of rock has proven to be a useful non-destructive analytic technique. We present experimental results,based on AE observations, that show the nucleation and growth of macroscopic fault planes in granite and sandstone samples. By controlling axial stress to maintain constant AE rate rather than more conventional loading conditions such as constant strain rate or constant stress, we have been successful in retarding the failure process in triaxial experiments. As a result, the post-failure stress curve has been followed quasistatically, extending to minutes or hours the fault growth process that normally would occur violently in a fraction of a second. In addition to this novel control system, three-dimensional locations of AE events were determined by analyzing the relative arrival times of AE pulses recorded on a network of transducers attached to the sample. In this manner, as many as 40 000 AE events were located in the course of a single experiment. While the details of fault formation varied from experiment to experiment, a number of features were consistently observed. In all three granite experiments, the fault plane nucleated abruptly at a point on the sample surface soon after reaching peak stress. Prior to fault nucleation, microcrack growth was distributed evenly throughout the granite samples. From the nucleation site, the fault plane grew across the sample, accompanied by a gradual drop in axial stress. AE locations showed that the fault propagated as a fracture front (process zone) with in-plane dimension of 10-50 mm. As the fracture front passed, the AE from a given region would drop to a low level. If allowed to progress to completion, stress eventually dropped to the frictional sliding strength. Sandstone samples showed somewhat different response. In these experiments, a diffuse damage zone appeared prior to peak strength and gradually localized into an incipient fault plane. After passing through peak stress, this plane grew, as in the granite samples, to eventually bisect the sample.