USGS ScienceSearch

USGS · 70043887

Seismic-refraction measurements of crustal structure between Nevada Test Site and Ludlow, California

Abstract

Seismic-refraction measurements from nuclear and chemical explosions were made along a line from the Nevada Test Site (NTS) to Ludlow, California, and additional recordings from nuclear explosions were made southward toward Calexico, California. The time of first arrivals from the Ludlow shotpoint is expressed as T 0 = 0.00 + Δ/2.50 (assumed), T 1 = 1.00 + Δ6.10, T 2 = 2.81 + Δ/6.80, and T 3 = 5.48 + ~7.76, where T is in seconds and distance Δ is in km. First arrival times from NTS fit the lines T 1 = 0.74 + Δ/6.10, T 2 = 2.81 + Δ/6.80 (assumed), T 3 = 6.70 + Δ/8.04 to a distance of 265 km, beyond 265 km T 3 = 5.83 + Δ/7.75. The difference in the apparent velocities of the P n (T 3 ) arrival is caused by variations in the dip of the Mohorovicic discontinuity. The thickness of the successive layers at NTS are H 0 s 1.0 km (V 0 ~ 2.5 km/sec), H 1 = 13 km (v 1 = 6.1 km/sec), and H 2 = 20 km (v 2 = 6.8 km/ sec); the total crustal thickness is 34 km. The successive crustal layers at Ludlow have a thickness of H 0 = 1.4 km, H 1 = 13 km, and H 2 = 13 km; the total crustal thickness is 27 km.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 32.4982° to 36.0013° latitude; -116.9975° to -114.5009° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. F. Gibbs, J. C. Roller. 1964. Seismic-refraction measurements of crustal structure between Nevada Test Site and Ludlow, California. https://doi.org/10.3133/70043887

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

The Parkfield-Cholame, California, earthquakes of June-August, 1966; instrumental seismic studies

U.S. Geological Survey instrumental seismic studies in the Parkfield-Cholame area consist of three related parts that were undertaken as pilot studies in a program designed to develop improved tools and concepts for investigating the properties and behavior of the San Andreas fault. These studies include: 1. The long=term monitoring of the seismic background on the San Andreas fault in Cholame Valley by means of a short-period Benioff seismograph station at Gold Hill. 2. The investigation of the geometry of the zone of aftershocks of the June 27 earthquakes by means of a small portable cluster of short-period, primarily vertical-component seismographs. 3. The seismic-refraction calibration of the region enclosing the aftershock source by means of three short reversed refraction profiles and a "calibration shot" near the epicenter of the main June 27 earthquake. This brief report outlines the work that has been completed and presents some preliminary results obtained from analysis of records from Gold Hill and the portable cluster.

California

Calculations of upper-mantle velocity from published Soviet earthquake data

The lack of information on mantle velocities and crustal structure of the U.S.S.R. has led to a preliminary examination of published Soviet earthquake bulletins in the hope of deriving useful velocity and structure information from the data they contain. Mantle velocities deduced from earthquake data on several Russian earthquakes are in excellent agreement with results of Soviet deep seismic sounding.

Soviet Union

Variations in regional traveltimes

Precise epicentral location of a seismic event is made difficult by variations in regional traveltimes. A discussion is presented on delays to be expected in the various segments of a generalized travel path of seismic waves. Traveltime variations caused by changes in crustal structure and velocity introduce a major part of the uncertainty in traveltime at both the seismic source and receiver. Consideration of geologic factors that tend to be related to crustal thickness and mantle velocity may permit an estimate of the amount of delay introduced at the source. Delay at the seismic receiving stations can be determined and corrected for by a study of crustal thickness and a calibration of the velocity structure under the stations.

Crustal Studies Technical Letter