USGS Science⌕ Search

Geology topics

Research about Colorado

Source-linked reports with geographic coverage including Colorado.

At least 829 records · Page 46Linked to original sources

Temporal and spatial variations in precipitation, streamflow, suspended-sediment loads and yields, and land-condition trend analysis at the U.S. Army Piñon Canyon Maneuver Site, Las Animas County, Colorado, 1983 through 2007

In 2007, the U.S. Geological Survey, in cooperation with the U.S. Department of the Army, began an assessment of the spatial and temporal variations in precipitation, streamflow, suspended-sediment loads and yields, changes in land condition, effects of the tributaries on the Purgatoire River and the possible relation of effects from military training to hydrology and land conditions that have occurred at Pinon Canyon Maneuver Site (PCMS) from 1983 through 2007. Data were collected for precipitation (19 stations) and streamflow and sediment load (5 tributary and 2 main-stem Purgatoire River stations) during 1983 through 2007 for various time periods. The five tributary stations were Van Bremer Arroyo near Model, Taylor Arroyo below Rock Crossing, Lockwood Canyon Creek near Thatcher, Red Rock Canyon Creek at the mouth, and Bent Canyon Creek at the mouth. In addition, data were collected at two Purgatoire River stations: Purgatoire River near Thatcher and Purgatoire River at Rock Crossing.

Colorado↗

Rocks above the clouds: A hiker's and climber's guide to Colorado mountain geology

A Colorado mountain geology book written specifically for climbers, scramblers and hikers. A geologic primer for mountain people with range-by-range geological descriptions of Colorado mountains and detailed geologic information on the Fourteeners. Rocks Above the Clouds is the first geology book written for climbers, scramblers and hikers. It is an exploration of how the nature of mountains and the challenges they present to the climber and hiker are influenced by the rocks that form them, in other words, by their geology. After describing the types of rocks found in mountains, the authors of Rocks Above the Clouds cover the geologic process from the big bang through the processes that continue to shape the mountains today. This mountain geology primer is a range-by-range description of what to expect in the Colorado mountains followed by some very curious information on the Colorado 14ers. Whether you travel in the mountains as a casual hiker, peak bagging scrambler, or technical climber, knowledge of mountain geology can help in planning your route, selecting your campsite and evaluating the hazards you face. Knowing something about different rock types might enable you to pick a route that avoids loose rock. Knowing that when wet, a particular rock surface will feel like oil might encourage you to forgo that siesta on the summit and head down before the afternoon thunderstorm.

Colorado↗

Possible young faulting in the Piedmont of North-Central Colorado

We interpret several linear topographic scarps in both alluvium and bedrock in the piedmont of north-central Colorado between Denver and Wyoming to be fault scarps. The scarps, ranging from tens of feet to about 150 ft in height, bound trough-like (graben and half-graben) forms. These features coincide in part with the floodplains of the South Platte River and Lone Tree, St. Vrain, and Boulder Creeks. Details of their topographic forms as well as relations of the Holocene and Pleistocene gravels underlying the floodplains suggest to us that the forms resulted from Quaternary tectonism.

Colorado↗

Boulder Creek: A stream ecosystem in an urban landscape

The Boulder Creek Watershed, within the Front Range region of Colorado, is typical of many western watersheds because it is composed of a high-gradient upper reach mostly fed by snowmelt, a substantial change in gradient at the range front, and an urban corridor within the lower gradient section. A stream ecosystem within an urban landscape not only can provide water for municipal, industrial, and agricultural needs, but also can be utilized for recreation, esthetic enjoyment, and wastewater disposal. The purpose of this 26 km bicycle field trip is to explore the hydrology and geochemistry of Boulder and South Boulder Creeks and to discuss topics including flood frequency and hazards, aqueous geochemistry of the watershed, and potential impacts of invasive species and emerging contaminants on stream ecology.

Colorado↗

A model for radial dike emplacement in composite cones based on observations from Summer Coon volcano, Colorado, USA

We mapped the geometry of 13 silicic dikes at Summer Coon, an eroded Oligocene stratovolcano in southern Colorado, to investigate various characteristics of radial dike emplacement in composite volcanoes. Exposed dikes are up to about 7 km in length and have numerous offset segments along their upper peripheries. Surprisingly, most dikes at Summer Coon increase in thickness with distance from the center of the volcano. Magma pressure in a dike is expected to lessen away from the pressurized source region, which would encourage a blade-like dike to decrease in thickness with distance from the center of the volcano. We attribute the observed thickness pattern as evidence of a driving pressure gradient, which is caused by decreasing host rock shear modulus and horizontal stress, both due to decreasing emplacement depths beneath the sloping flanks of the volcano. Based on data from Summer Coon, we propose that radial dikes originate at depth below the summit of a host volcano and follow steeply inclined paths towards the surface. Near the interface between volcanic cone and basement, which may represent a neutral buoyancy surface or stress barrier, magma is transported subhorizontally and radially away from the center of the volcano in blade-like dikes. The dikes thicken with increasing radial distance, and offset segments and fingers form along the upper peripheries of the intrusions. Eruptions may occur anywhere along the length of the dikes, but the erupted volume will generally be greater for dike-fed eruptions far from the center of the host volcano owing to the increase in driving pressure with distance from the source. Observed eruptive volumes, vent locations, and vent-area intrusions from inferred post-glacial dike-fed eruptions at Mount Adams, Washington, USA, support the proposed model. Hazards associated with radial dike emplacement are therefore greater for longer dikes that propagate to the outer flanks of a volcano.

Colorado↗

Water quality in shallow alluvial aquifers, Upper Colorado River Basin, Colorado, 1997

Shallow ground water in areas of increasing urban development within the Upper Colorado River Basin was sampled for inorganic and organic constituents to characterize water-quality conditions and to identify potential anthropogenic effects resulting from development. In 1997, 25 shallow monitoring wells were installed and sampled in five areas of urban development in Eagle, Grand, Gunnison, and Summit Counties, Colorado. The results of this study indicate that the shallow ground water in the study area is suitable for most uses. Nonparametric statistical methods showed that constituents and parameters measured in the shallow wells were often significantly different between the five developing urban areas. Radon concentrations exceeded the proposed USEPA maximum contaminant level at all sites. The presence of nutrients, pesticides, and volatile organic compounds indicate anthropogenic activities are affecting the shallow ground-water quality in the study area. Nitrate as N concentrations greater than 2.0 mg/L were observed in ground water recharged between the 1980s and 1990s. Low concentrations of methylene blue active substances were detected at a few sites. Total coliform bacteria were detected at ten sites; however, E. coli was not detected. Continued monitoring is needed to assess the effects of increasing urban development on the shallow ground-water quality in the study area.

Colorado↗

Formation of mixed Al-Fe colloidal sorbent and dissolved-colloidal partitioning of Cu and Zn in the Cement Creek - Animas River Confluence, Silverton, Colorado

Transport and chemical transformations of dissolved and colloidal Al, Fe, Cu and Zn were studied by detailed sampling in the mixing zone downstream from the confluence of Cement Creek (pH 4.1) with the Animas River (pH 7.6). Complete mixing resulted in circumneutral pH in the downstream reach of the 1300 m study area. All four metals were transported through this mixing zone without significant losses to the streambed, and they exhibited transformations from dissolved to colloidal forms to varying degrees during the mixing process. Nearly all of the Al formed colloidal hydrous Al oxides (HAO) as pH increased (4.8–6.5), whereas colloidal hydrous Fe oxides (HFO) were supplied by Cement Creek as well as formed in the mixing zone primarily at higher pH (>6.5). The short travel time through the mixing zone (approx. 40 min) and pH limited the formation of HFO from dissolved Fe 2+ supplied by Cement Creek. Although the proportions of HAO and HFO varied as the streams mixed, the colloidal sorbent typically was enriched in HAO relative to HFO by a factor of 1.5–2.1 (by mole) in the pH range where dissolved-to-colloidal partitioning of Cu and Zn was observed. Model simulations of sorption by HFO (alone) greatly underestimated the dissolved-to-colloidal partitioning of Zn. Previous studies have shown that HAO–HFO mixtures can sorb greater amounts of Zn than HFO alone, but the high Zn-to-sorbent ratio in this mixing zone could also account for greater partitioning. In contrast to Zn, comparisons with model simulations did not show that Cu sorption was greater than that for HFO alone, and also indicated that sorption was possibly less than what would be expected for a non-interactive mixture of these two sorbents. These field results for Cu, however, might be influenced by (organic) complexation or other factors in this natural system. Laboratory mixing experiments using natural source waters (upstream of the confluence) showed that the presence of HFO in the mixed sorbent resulted in greater Cu partitioning than for HAO alone, and that the effect was greater with increasing (mole fraction) HFO. This was consistent with field results that showed greater Cu sorption when additional HFO was formed in the downstream reach of the mixing zone. Further research is needed to identify the significance of surface-related mechanisms specific to HAO–HFO mixtures that could affect the partitioning of Cu in natural systems.

Colorado↗

A simulation-based approach for estimating premining water quality: Red Mountain Creek, Colorado

Regulatory agencies are often charged with the task of setting site-specific numeric water quality standards for impaired streams. This task is particularly difficult for streams draining highly mineralized watersheds with past mining activity. Baseline water quality data obtained prior to mining are often non-existent and application of generic water quality standards developed for unmineralized watersheds is suspect given the geology of most watersheds affected by mining. Various approaches have been used to estimate premining conditions, but none of the existing approaches rigorously consider the physical and geochemical processes that ultimately determine instream water quality. An approach based on simulation modeling is therefore proposed herein. The approach utilizes synoptic data that provide spatially-detailed profiles of concentration, streamflow, and constituent load along the study reach. This field data set is used to calibrate a reactive stream transport model that considers the suite of physical and geochemical processes that affect constituent concentrations during instream transport. A key input to the model is the quality and quantity of waters entering the study reach. This input is based on chemical analyses available from synoptic sampling and observed increases in streamflow along the study reach. Given the calibrated model, additional simulations are conducted to estimate premining conditions. In these simulations, the chemistry of mining-affected sources is replaced with the chemistry of waters that are thought to be unaffected by mining (proximal, premining analogues). The resultant simulations provide estimates of premining water quality that reflect both the reduced loads that were present prior to mining and the processes that affect these loads as they are transported downstream. This simulation-based approach is demonstrated using data from Red Mountain Creek, Colorado, a small stream draining a heavily-mined watershed. Model application to the premining problem for Red Mountain Creek is based on limited field reconnaissance and chemical analyses; additional field work and analyses may be needed to develop definitive, quantitative estimates of premining water quality.

Colorado↗

Species-area curves indicate the importance of habitats' contributions to regional biodiversity

We examined species-area curves, species composition and similarity (Jaccard's coefficients), and species richness in 17 vegetation types to develop a composite index of a vegetation type's contribution to regional species richness. We collected data from 1 to 1000 m2 scales in 147 nested plots in Rocky Mountain National Park, Colorado, USA to compare three species-area curve models' abilities to estimate the number of species observed in each vegetation type. The log(species)-log(area) curve had the largest adjusted coefficients of determination (r2 values) in 12 of the 17 types, followed by the species-log(area) curve with five of the highest values. When the slopes of the curves were corrected for species overlap among plots with Jaccard's coefficients, the species-log(area) curves estimated values closest to those observed. We combined information from species-area curves and measures of heterogeneity with information on the area covered by each vegetation type and found that the types making the greatest contributions to regional biodiversity covered the smallest areas. This approach may provide an accurate and relatively rapid way to rank hotspots of plant diversity within regions of interest.

Colorado↗

Surface-exposure ages of Front Range moraines that may have formed during the Younger Dryas, 8.2 cal ka, and Little Ice Age events

Surface-exposure ( 10 Be) ages have been obtained on boulders from three post-Pinedale end-moraine complexes in the Front Range, Colorado. Boulder rounding appears related to the cirque-to-moraine transport distance at each site with subrounded boulders being typical of the 2-km-long Chicago Lakes Glacier, subangular boulders being typical of the 1-km-long Butler Gulch Glacier, and angular boulders being typical of the few-hundred-m-long Isabelle Glacier. Surface-exposure ages of angular boulders from the Isabelle Glacier moraine, which formed during the Little Ice Age (LIA) according to previous lichenometric dating, indicate cosmogenic inheritance values ranging from 0 to ∼3.0 10 Be ka. 1 Subangular boulders from the Butler Gulch end moraine yielded surface-exposure ages ranging from 5 to 10.2 10 Be ka. We suggest that this moraine was deposited during the 8.2 cal ka event, which has been associated with outburst floods from Lake Agassiz and Lake Ojibway, and that the large age range associated with the Butler Gulch end moraine is caused by cosmogenic shielding of and(or) spalling from boulders that have ages in the younger part of the range and by cosmogenic inheritance in boulders that have ages in the older part of the range. The surface-exposure ages of eight of nine subrounded boulders from the Chicago Lakes area fall within the 13.0–11.7 10 Be ka age range, and appear to have been deposited during the Younger Dryas interval. The general lack of inheritance in the eight samples probably stems from the fact that only a few thousand years intervened between the retreat of the Pinedale glacier and the advance of the Chicago Lakes glacier; in addition, bedrock in the Chicago Lakes cirque area may have remained covered with snow and ice during that interval, thus partially shielding the bedrock from cosmogenic radiation.

Colorado↗

Characterizing infiltration through a mine-waste dump using electrical geophysical and tracer-injection methods, Clear Creek County, Colorado

Infiltration of surface water through mine waste can be an important or even dominant source of contaminants in a watershed. The Waldorf mine site in Clear Creek County, Colorado, is typical of tens of thousands of small mines and prospects on public lands throughout the United States. In this study, electromagnetic (EM) conductivity and direct current (dc) resistivity surveys were conducted in tandem with a NaCl tracer study to delineate ground-water flow paths through a mine-waste dump and adjacent wetland area. The tracer was used to tag adit water infiltrating from braided channels flowing over the top of the dump to seeps at the base of the dump. Infiltration from the braided channels had a maximum flow rate of 92 m/day and a hydraulic conductivity of 1.6 × 10 4 cm 3 /s. After rerouting of adit flow around the waste dump, discharge at some of the largest seeps was reduced, although not all seepage was eliminated entirely. Integrating results of the tracer study with those of the EM and dc geophysical surveys revealed two main flow paths of ground water, one beneath the dump and one through the dump. The main source of water to the first flow path is deeper ground water emerging from the fault zone beneath the collapsed adit. This flow path travels beneath the waste dump and appears to have been unaffected by rerouting of the adit discharge around the waste dump. The source of the second flow path is infiltration of adit water from braided channels flowing over the top of the dump, which is intermediate in depth and flows through the center of the waste dump. Following rerouting of adit flow, discharge to seeps at the toe of the dump along this flow path was reduced by as much as two-thirds, although not eliminated entirely. Improved understanding of ground-water flow paths through this abandoned mine site is important in developing effective remediation strategies to target sources of metals emanating from the adit, waste dump, and contaminated wetland area. Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. government.

Colorado↗

Mining-impacted sources of metal loading to an alpine stream based on a tracer-injection study, Clear Creek County, Colorado

Base flow water in Leavenworth Creek, a tributary to South Clear Creek in Clear Creek County, Colorado, contains copper and zinc at levels toxic to aquatic life. The metals are predominantly derived from the historical Waldorf mine, and sources include an adit, a mine-waste dump, and mill-tailings deposits. Tracer-injection and water-chemistry synoptic studies were conducted during low-flow conditions to quantify metal loads of mining-impacted inflows and their relative contributions to nearby Leavenworth Creek. During the 2-year investigation, the adit was rerouted in an attempt to reduce metal loading to the stream. During the first year, a lithium-bromide tracer was injected continuously into the stream to achieve steady-state conditions prior to synoptic sampling. Synoptic samples were collected from Leavenworth Creek and from discrete surface inflows. One year later, synoptic sampling was repeated at selected sites to evaluate whether rerouting of the adit flow had improved water quality. The largest sources of copper and zinc to the creek were from surface inflows from the adit, diffuse inflows from wetland areas, and leaching of dispersed mill tailings. Major instream processes included mixing between mining- and non-mining-impacted waters and the attenuation of iron, aluminum, manganese, and othermetals by precipitation or sorption. One year after the rerouting, the Zn and Cu loads in Leavenworth Creek from the adit discharge versus those from leaching of a large volume of dispersed mill tailings were approximately equal to, if not greater than, those before. The mine-waste dump does not appear to be a major source of metal loading. Any improvement that may have resulted from the elimination of adit flow across the dump was masked by higher adit discharge attributed to a larger snow pack. Although many mine remediation activities commonly proceed without prior scientific studies to identify the sources and pathways of metal transport, such strategies do not always translate to water-quality improvements in the stream. Assessment of sources and pathways to gain better understanding of the system is a necessary investment in the outcome of any successful remediation strategy.

Colorado↗

From buttes to bowls: Repeated relief inversion in the landscape of the Colorado Piedmont

Mesas and buttes of the central Colorado Piedmont are composed of at least two distinct rock types, which differ in their cohesiveness and resistance to erosion. The lower parts of the exposed stratigraphic section are poorly cemented, Upper Cretaceous to Middle Eocene sandstones of the Dawson Formation. The caprocks are composed of one or more resistant formations of Late Eocene age: the Castle Rock Conglomerate, Wall Mountain Tuff, and the conglomerate of Larkspur Butte. These formations were originally deposited in topographic lows, but due to their resistance,they now cap prominent buttes and mesas of the Colorado Piedmont. Erosion of the caprock through progressive retreat of the butte scarp produces colluvium that has a higher resistance to erosion than the poorly cemented underlying sandstone. Once the caprock of a butte has been removed by erosion, the underlying weakly cemented Dawson Formation is readily eroded. Ultimately, the armored lower slopes of the former butte remain as a circular ridge standing as much as 100 m above the surrounding topography. This process produces a topographic low surrounded by relict faceted slopes where the flat top of the butte once stood. Prominent alluvial fans are associated with some of these annular features, and they record the main phases of butte removal and excavation of the central part of the armored slopes. Multiple generations of alluvial fans contain coarse- and fine-grained facies that represent changes in effective stream power and record alternating phases of aggradation and erosion. The degree of soil development in the fan alluvium and height of the fan surfaces above streams indicates the oldest preserved gravel fan deposit is of late-middle Pleistocene age. The youngest luminescence (optically stimulated luminescence) dated alluvial fans were deposited during the late Pleistocene about the time of the Pinedale glacial maximum in Colorado, ca. 21,000 yr B.P.

Colorado↗

Environmental effects of historical mining in the Animas River watershed, southwestern Colorado

The U.S. Geological Survey has completed an extensive environmental study of the effects of historical mining on water and sediment quality and aquatic and riparian habitat in the Animas River watershed upstream from Silverton, Colorado. Results from this study are being used by Federal and State agencies and by the local watershed stakeholders group to implement remediation and cleanup activities. The Watershed Approach provides an effective means to rank and evaluate environmental impact of historical mining throughout a region: The mining-related sites that, upon evaluation, are shown to cause the greatest impact can become the subjects of remediation planning and implementation. This process helps land managers evaluate risk and focus remediation efforts on sites that may be the most deleterious to water quality and aquatic and riparian habitat.

Colorado↗

Geochemistry of Surface and Ground Water in Cement Creek from Gladstone to Georgia Gulch and in Prospect Gulch, San Juan County, Colorado

In San Juan County, Colo., the effects of historical mining continue to contribute metals to ground water and surface water. Previous research by the U.S. Geological Survey identified ground-water discharge as a significant pathway for the loading of metals to surface water in the upper Animas River watershed from both acid-mine drainage and acid-rock drainage. In support of this ground-water research effort, Prospect Gulch was selected for further study and the geochemistry of surface and ground water in the area was analyzed as part of four sampling plans: (1) ten streamflow and geochemistry measurements at five stream locations (four locations along Cement Creek plus the mouth of Prospect Gulch from July 2004 through August 2005), (2) detailed stream tracer dilution studies in Prospect Gulch and in Cement Creek from Gladstone to Georgia Gulch in early October 2004, (3) geochemistry of ground water through sampling of monitoring wells, piezometers, mine shafts, and springs, and (4) samples for noble gases and tritium/helium for recharge temperatures (recharge elevation) and ground-water age dating. This report summarizes all of the surface and ground-water data that was collected and includes: (1) all sample collection locations, (2) streamflow and geochemistry, (3) ground-water geochemistry, and (4) noble gas and tritium/helium data.

Colorado↗

Selected field parameters from streams and preliminary analytical data from water and macroinvertebrate samples, Central Colorado Assessment Project, task, 2004 and 2005

The U.S. Geological Survey (USGS) Central Colorado Assessment Project (CCAP) began in October 2003 and is planned to last through September 2008. One major goal of this project is to compare the relationships between surface-water chemistry and aquatic fauna in mined and unmined areas. To accomplish this goal, we are conducting a State-scale reconnaissance sampling program, in which we are collecting water and macroinvertebrate samples. Selected results from the first two years of project analyses are reported here. We plan to develop statistical models and use geographic information system (GIS) technology to quantify the relationships between ecological indicators of metal contamination in Rocky Mountain streams and water quality, landscape and land-use characteristics (for example, mine density, geology, geomorphology, vegetation, topography). Our research will test the hypothesis that physicochemical variables and ecological responses to metal concentrations in stream water in Rocky Mountain streams are ultimately determined largely by historical land uses.

Colorado↗

Chemical and hydrologic data from the Cement Creek and upper Animas River confluence and mixing zone, Silverton, Colorado, September 1997

Cement Creek, an acidic tributary, discharges into the circum-neutral Animas River (pH>7) in Silverton, Colorado located in the high-elevation San Juan Mountains. Mixing of Animas River water with acidic metal rich Cement Creek water raises water pH and produces metal precipitates. This report presents selected anion, cation, chloride, and sulfate data along with hydrologic data highlighting the mixing of these streams during the low-flow period in late summer 1997.

Colorado↗

Road impacts on the Baca National Wildlife Refuge, Colorado, with emphasis on effects to surface- and shallow ground-water hydrology - A literature review

A review of published research on unpaved road effects on surface-water and shallow ground-water hydrology was undertaken to assist the Baca National Wildlife Refuge, Colorado, in understanding factors potentially influencing refuge ecology. Few studies were found that addressed hydrological effects of roads on a comparable area of shallow slope in a semiarid region. No study dealt with road effects on surface- and ground-water supplies to ephemeral wetlands, which on the refuge are sustained by seasonal snowmelt in neighboring mountains. Road surfaces increase runoff, reduce infiltration, and serve as a sediment source. Roadbeds can interfere with normal surface- and ground-water flows and thereby influence the quantity, timing, and duration of water movement both across landscapes and through the soil. Hydrologic effects can be localized near the road as well as widespread and distant. The number, arrangement, and effectiveness of road-drainage structures (culverts and other devices) largely determine the level of hydrologic alteration produced by a road. Undesirable changes to natural hydrologic patterns can be minimized by considering potential impacts during road design, construction, and maintenance. Road removal as a means to restore desirable hydrologic conditions to landscapes adversely affected by roads has yet to be rigorously evaluated.

Colorado↗