USGS ScienceSearch

USGS · 70142173

Mining-impacted sources of metal loading to an alpine stream based on a tracer-injection study, Clear Creek County, Colorado

Abstract

Base flow water in Leavenworth Creek, a tributary to South Clear Creek in Clear Creek County, Colorado, contains copper and zinc at levels toxic to aquatic life. The metals are predominantly derived from the historical Waldorf mine, and sources include an adit, a mine-waste dump, and mill-tailings deposits. Tracer-injection and water-chemistry synoptic studies were conducted during low-flow conditions to quantify metal loads of mining-impacted inflows and their relative contributions to nearby Leavenworth Creek. During the 2-year investigation, the adit was rerouted in an attempt to reduce metal loading to the stream. During the first year, a lithium-bromide tracer was injected continuously into the stream to achieve steady-state conditions prior to synoptic sampling. Synoptic samples were collected from Leavenworth Creek and from discrete surface inflows. One year later, synoptic sampling was repeated at selected sites to evaluate whether rerouting of the adit flow had improved water quality. The largest sources of copper and zinc to the creek were from surface inflows from the adit, diffuse inflows from wetland areas, and leaching of dispersed mill tailings. Major instream processes included mixing between mining- and non-mining-impacted waters and the attenuation of iron, aluminum, manganese, and othermetals by precipitation or sorption. One year after the rerouting, the Zn and Cu loads in Leavenworth Creek from the adit discharge versus those from leaching of a large volume of dispersed mill tailings were approximately equal to, if not greater than, those before. The mine-waste dump does not appear to be a major source of metal loading. Any improvement that may have resulted from the elimination of adit flow across the dump was masked by higher adit discharge attributed to a larger snow pack. Although many mine remediation activities commonly proceed without prior scientific studies to identify the sources and pathways of metal transport, such strategies do not always translate to water-quality improvements in the stream. Assessment of sources and pathways to gain better understanding of the system is a necessary investment in the outcome of any successful remediation strategy.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 39.48920467334085° to 39.75365697136308° latitude; -106.00433349609375° to -105.42755126953125° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

David L. Fey, Laurie Wirt. 2007. Mining-impacted sources of metal loading to an alpine stream based on a tracer-injection study, Clear Creek County, Colorado. https://doi.org/10.1130/2007.4017(05)

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Shallow landslide hazard map of Seattle, Washington

Landslides, particularly debris flows, have long been a significant cause of damage and destruction to people and property in the Puget Sound region. Following the years of 1996 and 1997, the Federal Emergency Management Agency designated Seattle as a “Project Impact” city with the goal of encouraging the city to become more disaster resistant to landslides and other natural hazards. A major recommendation of the Project Impact council was that the city and the U.S. Geological Survey collaborate to produce a landslide hazard map. An exceptional data set archived by the city containing more than 100 yr of landslide data from severe storm events allowed comparison of actual landslide locations with those predicted by slope-stability modeling. We used an infinite-slope analysis, which models slope segments as rigid friction blocks, to estimate the susceptibility of slopes to debris flows, which are water-laden slurries that can form from shallow failures of soil and weathered bedrock and can travel at high velocities down steep slopes. Data used for the analysis consisted of a digital slope map derived from recent light detection and ranging (LiDAR) imagery of Seattle, recent digital geologic mapping of the city, and shear-strength test data for the geologic units found in the surrounding area. The combination of these data layers within a geographic information system (GIS) platform allowed us to create a shallow landslide hazard map for Seattle.

Washington

Assessing deep-seated landslide susceptibility using 3-D groundwater and slope-stability analyses, southwestern Seattle, Washington

In Seattle, Washington, deep-seated landslides on bluffs along Puget Sound have historically caused extensive damage to land and structures. These large failures are controlled by three-dimensional (3-D) variations in strength and pore-water pressures. We assess the slope stability of part of southwestern Seattle using a 3-D limit-equilibrium analysis coupled with a 3-D groundwater flow model. Our analyses use a high-resolution digital elevation model (DEM) combined with assignment of strength and hydraulic properties based on geologic units. The hydrogeology of the Seattle area consists of a layer of permeable glacial outwash sand that overlies less permeable glacial lacustrine silty clay. Using a 3-D groundwater model, MODFLOW-2000, we simulate a water table above the less permeable units and calibrate the model to observed conditions. The simulated pore-pressure distribution is then used in a 3-D slope-stability analysis, SCOOPS, to quantify the stability of the coastal bluffs. For wet winter conditions, our analyses predict that the least stable areas are steep hillslopes above Puget Sound, where pore pressures are elevated in the outwash sand. Groundwater flow converges in coastal reentrants, resulting in elevated pore pressures and destabilization of slopes. Regions predicted to be least stable include the areas in or adjacent to three mapped historically active deep-seated landslides. The results of our 3-D analyses differ significantly from a slope map or results from one-dimensional (1-D) analyses.

Washington

A prototype system for forecasting landslides in the Seattle, Washington, area

Empirical rainfall thresholds and related information form the basis of a prototype system for forecasting landslides in the Seattle area. The forecasts are tied to four alert levels, and a decision tree guides the use of thresholds to determine the appropriate level. From analysis of historical landslide data, we developed a formula for a cumulative rainfall threshold (CT), P 3 = 88.9 − 0.67 P 15 , defined by rainfall amounts in millimeters during consecutive 3 d (72 h) periods, P 3 , and the 15 d (360 h) period before P 3 , P 15 . The variable CT captures more than 90% of historical events of three or more landslides in 1 d and 3 d periods recorded from 1978 to 2003. However, the low probability of landslide occurrence on a day when the CT is exceeded at one or more rain gauges (8.4%) justifies a low-level of alert for possible landslide occurrence, but it does trigger more vigilant monitoring of rainfall and soil wetness. Exceedance of a rainfall intensity-duration threshold I = 82.73 D −1.13 , for intensity, I (mm/hr), and duration, D (hr), corresponds to a higher probability of landslide occurrence (30%) and forms the basis for issuing warnings of impending, widespread occurrence of landslides. Information about the area of exceedance and soil wetness can be used to increase the certainty of landslide forecasts (probabilities as great as 71%). Automated analysis of real-time rainfall and subsurface water data and digital quantitative precipitation forecasts are needed to fully implement a warning system based on the two thresholds.

Washington