USGS Science⌕ Search

Geology topics

Minerals & deposits

Find USGS publications on mineral resources and deposits. Search commodities and geographic names, then check source reports for geology and assessment methods.

At least 1,585 records · Page 88Linked to original sources

REMOTE-SENSING MINERAL DISCOVERIES IN THE MOJAVE DESERT OF CALIFORNIA.

As a result of remote sensing studies in the Mojave Desert of California three previously unknown stockwork molybdenum systems have been discovered. It is not known if economic deposits of molybdenum and associated minerals occur in these areas; there is, however, sufficient data to judge that these areas are worthy of further exploration. The purpose of this paper is to present case histories of two of these discoveries. These discoveries have been made from laboratory analyses of Landsat multispectral scanner images to map limonitic materials and from field reconnaissance to determine if the limonite is due to hydrothermal alteration. In those areas that seemed most promising, airborne spectrometer surveys were employed to mapped Al-OH minerals, and audio-magnetotelluric (AMT) and telluric-traversing surveys were performed to obtain information at depth.

Conference Paper↗

Mineralogical studies of the nitrate deposits of Chile. V. Iquiqueite, Na4K3Mg(CrO4)B24O39(OH).12H2O, a new saline mineral.

Iquiqueite (Na4K3Mg(CrO4)B24O39(OH).12H2O, a 11.6369(14), c 30.158(7) A, P31c, Z = 3) occurs as a widespread minor constituent in the nitrate fields of northern Chile. It is particularly abundant in the vicinity of Zapiga, Tarapaca province. Associated minerals include nitratite, halite, nitre, darapskite, blodite, glauberite, dietzeite, bruggenite, ulexite and gypsum. Iquiqueite forms thin, yellow, hexagonal platelets (5-50 mu m in diameter, <5 mu m in thickness) that are disseminated singly or in vermiform aggregates in nitrate ore. Observed forms are c(0001) and m(1010). Cleavage is perfect on (0001) and imperfect on (1010); H. = or <2. D(calc.) 2.05 g/cm3 and measured sp. gr. 2.05 + or - 0.09. The mineral is uniaxial negative, epsilon 1.447(2), omega 1.502(2). The XRD pattern has the six strongest lines 3.02(100), 2.856(100), 10.11(85), 6.04(85), 3.28(85), 3.22(85) A. The name is for the city of Iquique, Chile.-J.A.Z.

American Mineralogist↗

Mineralogical studies of the nitrate deposits of Chile: VI. Hectorfloresite, Na9(IO3)(SO4)4, a new saline mineral

The new mineral hectorfloresite, known to occur in only one locality in the nitrate fields of northern Chile, consists of tiny prismatic crystals, generally less than 1 mm long and 0.2 mm in diameter, in cavities in dense nitrate ore consisting of saline-cemented silt, sand, and small rock fragments. The physical, optical and crystallographic properties of the new mineral are described. -from Authors

American Mineralogist↗

Mineralization potential along the trend of the Keweenawan- age Central North American Rift System in Iowa, Nebraska, and Kansas

The tectonic and sedimentary environment of the Central North American Rift System (CNARS) provides an excellent setting for major mineral deposits. Major north-northeast-trending high-angle normal or reverse faults and northwest-trending transcurrent fault systems may exercise control over ore forming processes. Gabbro and basalt are the dominant igneous rock types. Carbonatite and kimberlite occur in Nebraska and Kansas. Concentrations of Cu, Ni, Co, Ti, Au, Ag and PG minerals are known to occur in this setting. Arkosic sandstone, siltstone, shale, and minor carbonate units occur on top of the rift basalts and in flanking basins where they may reach thicknesses of 10 km (6 miles). The potential for stratiform or unconformity-related metalliferous deposits should be considered. The rift as a whole remains largely unexplored.

Mining Engineering↗

Emerald mineralization and metasomatism of amphibolite, khaltaro granitic pegmatite - Hydrothermal vein system, Haramosh Mountains, Northern Pakistan

Emerald mineralization is found within 0.1- to 1-m-thick hydrothermal veins and granitic pegmatites cutting amphibolite within the Nanga Parbat - Haramosh massif, in northern Pakistan. The amphibolite forms a sill-like body within garnet-mica schist, and both are part of a regional layered gneiss unit of Proterozoic (?) age. The 40Ar/39Ar data for muscovite from a pegmatite yield a plateau age of 9.13 ?? 0.04 Ma. Muscovite from mica schist and hornblende from amphibolite yield disturbed spectra with interpreted ages of 9 to 10 Ma and more than 225 Ma, respectively, which indicate that peak Tertiary metamorphism reached 325 to 550??C prior to 10 Ma. Pegmatites were emplaced after peak metamorphism during this interval and are older than pegmatites farther south in the massif. At Khaltaro, simply zoned albite-rich miarolitic pegmatites and hydrothermal veins containing various proportions of quartz, albite, tourmaline, muscovite, and beryl are associated with a 1- to 3-m-thick heterogeneous leucogranite sill, that is locally albitized. The pegmatites likely crystallized at 650 to 600??C at pressures of less than 2 kbar. Crystals of emerald form within thin (<30 cm) veins of quartz and tourmaline-albite, and more rarely in pegmatite, near the contacts with altered amphibolite. The emerald-green coloration is produced by Cr and Fe. The Cr and total Fe contents, expressed as Cr2O3 and Fe2O3, respectively, decrease systematically from emerald (>0.20, 0.54-0.89 wt%), to pale blue beryl (<0.07, 0.10-0.63%), to colorless beryl (<0.07, 0.07-0.28%). The amphibolite is metasomatized in less than 20-cm-wide selvages that are symmetrically zoned around veins or pegmatites. A sporadic inner zone containing F-rich biotite, tourmaline, and fluorite, with local albite, muscovite, quartz, and rare beryl, gives way to an intermediate zone containing biotite and fluorite with local plagioclase and quartz, and to an outer zone of amphibolite containing sparse biotite and local quartz. The inner and intermediate zones experienced gains of K, H, F, B, Li, Rb, Cs, Be, Ta, Nb, As, Y and Sr, and losses of Si, Mg, Ca, Fe, Cr, V and Sc. The outer alteration zone has gained F, Li, Rb, Cs, and As. Oxygen isotope analyses of igneous and hydrothermal minerals indicate that a single fluid of magmatic origin with ??18OH2O = 8??? produced the pegmatite-vein system and hydrothermal alteration at temperatures between 550 and 400??C. The formation of emerald results from introduction of HF-rich magmatic-hydrothermal fluids into the amphibolite, which caused hydrogen ion metasomatism and released Cr and Fe into the pegmatite-vein system.

Canadian Mineralogist↗

Phosphovanadylite: a new vanadium phosphate mineral with a zeolite-type structure

Phosphovanadylite, whose simplified formula is (Ba,Ca,K,Na)x([(Va,Al)4P2(P,OH)16].12H2), is a new vanadium phosphate zeolite mineral found in the Phosphoria Formation at Monsanto's Enoch Valley Mine, Soda Springs, Idaho. Its formula in more detail is (Ba0.38Ca0.20K0.006Na0.02)??0.66 [P2(V3.44Al0.046)??3.90O10.34(OH)5.66] .12H2O. The drusy mineral occurs as pale greenish-blue euhedral cubes (20-50 ??m edge) coating phosphatic, organic-rich mudstone. The chemical composition determined by electron microprobe is (in weight percent) V-28.02, P-9.91, Al-1.97, Ca-1.31, Ba-8.28, Cd-0.09, Zn-0.34, Na-0.15, K-0.73, O-46.57, and F-0.03. The index of refraction is nD = 1.566 (4) and specific gravity is 2.16 (3). The X-ray powder pattern shows strong reflections at 3.16 A (422), 2.58 (600), 2.44 (620), and 7.73 (200), which are indexed on the basis of a cubic body-centered unit cell with a = 15.470 (4) A. From the single-crystal structure analysis, its space group was determined to be I43m, Z = 6, and its structure consists of V4O18 16 octahedral clusters linked to each other by P atoms to form a cubic lattice, creating cavities 7.0 and 5.5 A in diameter where mainly H2O resides. Final residual indexes are R = 0.066, Rw = 0.061, goodness-of-fit = 0.75, and 93 observations and 24 parameters.

American Mineralogist↗

Mineral resources of Peru's ancient societies

Northern Peru has an exceptionally rich archaeological heritage that includes metalwork, ceramics and textiles. The success of at least a half-dozen pre-Columbian societies dating back 3,000 years and subsequent Spanish colonization in the 1400s has rested on the effective use of northern Peru's abundant resources. In the summer of 2000, my son Matt and I learned about that connection firsthand by volunteering at the Santa Rita B archaeological site in the Chao Valley near Trujillo in northern Peru. Riding donkey-back through the Andes and talking with local people, we got our hands dirty in the rich archaeology and geology of the area. We were able to correlate mineral occurrences to their various roles in society - opening a window into the region's fascinating past. From construction to metallurgy, pre-Columbian societies flourished and advanced because of their understanding and use of the available mineral resources.

Geotimes↗

Killer clays! Natural antibacterial clay minerals

The clay chemical properties that may be important in medicine were investigated. It was found that natural clay minerals can have striking and very specific effects on microbial populations. The effects can range from potentially enhanced microbial growth to complete sterilization. This paper presents evidence that natural clay minerals can be effective antimicrobial agents.

Mineralogical Society Bulletin↗

Mineral resource of the month: vermiculite

Vermiculite, a hydrated magnesium-aluminum-iron silicate mineral, has a range of uses that take advantage of its fire resistance, good insulating properties, high liquid absorption capacity, inertness and low density. Most applications for vermiculite use an exfoliated (heat-expanded) form of the mineral. In general, coarser grades of vermiculite are used as loose fill insulation and in horticulture. Finer grades are used in wallboard and plasters and for animal feeds and fertilizers.

Geotimes↗

Mineral resource of the month: gypsum

You may not realize it, but the walls of your office are probably made from a mineral: gypsum. Gypsum is an abundant, evaporite-derived sedimentary mineral with deposits located throughout the world. It is often associated with paleoenvironmental lake and marine environments. In its pure form, gypsum consists of calcium sulfate dihydrate, although most crude gypsum naturally occurs in combination with anhydrite, clay, dolomite and/or limestone.

Earth↗

US nonfuel mineral exploration: Selected findings for 1995-2009 from the USGS

The U.S. Geological Survey (USGS) has been systematically monitoring global nonfuel mineral exploration activities to anticipate the location and quantity of future nonfuel minerals supply for about 100 commodities, with an emphasis on precious and base metals. Since 1995, the USGS has developed an annual list of 100 noteworthy prospects that were considered to have a high level of potential for near-term development based on such criteria as intensity of drilling, level of capital investment, and size of resource. This study reviews the status of the U.S. sites included on these lists as of July 2011 and addresses domestic prospects not included on the lists that have come into production since 1995.

Mining Engineering↗

Mineral resource of the month: indium

Geologically, the occurrence of indium minerals is rare. The element most often occurs as a sulfide inclusion or substitutes in other base-metal minerals, including cassiterite, chalcopyrite, sphalerite and stannite. Indium’s abundance in the crust is estimated to be 0.05 parts per million, which makes it more abundant than silver, but it is so widely disseminated that it does not occur in high enough concentrations to form mineable deposits. Therefore, indium is most often recovered from byproduct residues produced during the refining of lead and zinc. But only about one-quarter of the indium mined worldwide is refined into metal, as many indium-bearing concentrates are sent to refineries that do not have the capability of recovering the metal.

Earth↗

Mineral resource of the month: potash

The article offers basic information about the mineral resource potash. According to the author, potash is the generic term for a variety of mined and manufactured salts that contain the mineral potassium in a water-soluble form. The author adds that potash is used in fertilizers, soaps and detergents, glass and ceramics, and alkaline batteries.

Earth↗

Earth mineral resource of the month: asbestos

The article discusses the characteristics and feature of asbestos. According to the author, asbestos is a generic name for six needle-shaped minerals that possess high tensile strengths, flexibility, and resistance to chemical and thermal degradation. These minerals are actinolite, amosite, anthophyllite, chrysolite, crocilodite and tremolite. Asbestos is used for strengthening concrete pipe, plastic components, and gypsum plasters.

Earth↗

Mineral resource of the month: clays

Clays represent one of the largest mineral commodities in the world in terms of mineral and rock production and use. Many people, however, do not recognize that clays are used in an amazingly wide variety of applications. Use continues to increase worldwide as populations and their associated needs increase. Robert Virta, clay and shale commodity specialist for the U.S. Geological Survey, has prepared the following information about clays.

Geotimes↗

Mineral resource of the month: tantalum

The article offers information on a rare transition metal called tantalum. It says that the blue-gray mineral resource was discovered in 1801 or 1802 and was used for capacitors in 1940. It adds that the tantalite ore and other minerals in the ore should be separated in order to generate concentrates of tantalum. The use of tantalum are also cited.

Earth↗

Mineral resource of the month: feldspar

The article focuses on feldspar, a mineral that composes of potassium, sodium, or a fusion of the two, and its various applications. According to estimates by scientists, the mineral is present at 60 percent of the crust of Earth, wherein it is commonly used for making glass and ceramics. Global mining of feldspar was about 20 million metric tons in 2010, wherein Italy, Turkey, and China mine 55 percent of the feldspar worldwide.

Earth↗