Geology topics

Maureen A. L. Walton

Publications and source records attributed to Maureen A. L. Walton.

17 recordsLinked to original sources

USGS2022

Revisiting the 1899 earthquake series using integrative geophysical analysis in Yakutat Bay, Alaska

A series of large earthquakes in 1899 affected southeastern Alaska near Yakutat and Disenchantment Bays. The largest of the series, a M W 8.2 event on 10 September 1899, generated an ~12-m-high tsunami and as much as 14.4 m of coseismic uplift in Yakutat Bay, the largest coseismic uplift ever measured. Several complex fault systems in the area are associated with the Yakutat terrane collision with North America and the termination of the Fairweather strike-slip system, but because faults local to Yakutat Bay have been incompletely or poorly mapped, it is unclear which fault system(s) ruptured during the 10 September 1899 event. Using marine geophysical data collected in August 2012, we provide an improved tectonic framework for the Yakutat area, which advances our understanding of earthquake hazards. We combined 153 line km of 2012 high-resolution multichannel seismic (MCS) reflection data with compressed high-intensity radar pulse (Chirp) profiles, basin-scale MCS data, 2018 seafloor bathymetry, published geodetic models and thermochronology data, and previous measurements of coseismic uplift to better constrain fault geometry and subsurface structure in the Yakutat Bay area. We did not observe any active or concealed faults crossing Yakutat Bay in our high-resolution data, requiring faults to be located entirely onshore or nearshore. We interpreted onshore faults east of Yakutat Bay to be associated with the transpressional termination of the Fairweather fault system, forming a series of splay faults that exhibit a horsetail geometry. Thrust and reverse faults on the west side of the bay are related to Yakutat terrane underthrusting and collision with North America. Our results include an updated fault map, structural model of Yakutat Bay, and quantitative assessment of uncertainties for legacy geologic coseismic uplift measurements. Additionally, our results indicate the 10 September 1899 rupture was possibly related to stress loading from the earlier Yakutat terrane underthrusting event of 4 September 1899, with the majority of 10 September coseismic slip occurring on the Esker Creek system on the northwest side of Yakutat Bay. Limited (~2 m) coseismic or postseismic slip associated with the 1899 events occurred on faults located east of Yakutat Bay.

Alaska↗

USGS2022

California Deepwater Investigations and Groundtruthing (Cal DIG) I, volume 3 — Benthic habitat characterization offshore Morro Bay, California

Coastal and Marine Ecological Classification Standard (CMECS) geoform, substrate, and biotic component geographic information system (GIS) products were developed for the U.S. Exclusive Economic Zone (U.S. EEZ) of south-central California in the region of Santa Lucia Bank motivated by interest in development of offshore wind-energy capacity and infrastructure. The Bureau of Ocean Energy Management (BOEM), in coordination with the State of California and many other members of the California Task Force, issued calls for information in 2018 for the study area offshore of Morro Bay, California. The study area is in depths of 500 to 1,200 meters (m) and adjacent to a decommissioned nuclear power plant with a developed electric grid connection, and in an area of high wind resource. BOEM is the lead agency responsible for planning and leasing in the U.S. EEZ and funded this project to assess baseline conditions of, and the potential effects on, the seafloor environment. This project, carried out by the U.S. Geological Survey (USGS), resulted in three reports: one on biological analysis of seafloor video data, one on analysis of the geologic framework and hazards, and this report on seafloor habitat. The study area consists of 8,424 square kilometers (km 2 ) of multibeam echo sounder (MBES) data acquired during five surveys from 2016 to 2019. Remotely operated vehicle (ROV) video was acquired in 2019 to supervise the classification of the MBES data into habitats. Derivatives of the MBES data were classified into 16 unique biotopes, 6 substrate types, 28 modifier groups, and 22 geoforms. The study area substrate is predominantly soft sediment (mud and fine sand) covering 7,804 km 2 (92.7 percent) of the area. Mixed substrate areas on rocky banks, channel scarps, and the shelf break comprise 404 km 2 (4.8 percent) of the study area. Hard substrate areas are found predominantly on the tops and flanks of banks and on bank ridges that separate canyons incising the banks. Hard substrates comprise 211 km 2 of the study area (2.5 percent). After the bathymetry and backscatter raster images (rasters) were classified, manual editing was also done to remove noise artifacts. This effort was not completely successful and there are numerous erroneous small areas in the rasters that have been passed on to the CMECS polygon product. Nearly 120,000 annotations of organisms and their habitat were made from 25 video transects selected from 185 hours of ROV video. In total, 2,714 km 2 of seafloor were successfully assigned to biotopes. Some biotopes were assigned to separate areas spatially distant from the transects that define the biotope. Expected relations between physical habitat and biota such as the number of species and the substrate induration and rugosity were verified. Slope is typically a predictive variable and was used in the classification of habitat, but the ground truth used for biotic component analysis included very little steeply sloping area. Ground-truth ROV operations were reduced by the sea state; additional ground truth could improve the biotic results and increase confidence in the spatial distribution of classifications reported here.

California↗

USGS2022

Seismic evidence for magmatic underplating along the Kodiak-Bowie Seamount Chain, Gulf of Alaska

Oceanic crust formed at mid-ocean ridges may be later modified by off-ridge magmatism forming seamounts, guyots, and islands. We investigate processes associated with seamount formation in the Gulf of Alaska Seamount Province using two coincident seismic reflection/wide-angle profiles. A north-south profile crosses the Kodiak-Bowie Seamount Chain and Aja fracture zone (FZ), and an orthogonal east-west profile is located about 90 km south of the seamount chain over Pacific plate oceanic crust. Structure along the profile away from the seamount chain is consistent with typical oceanic crust. Crust in our study region is thinnest (about 5.6 km) at the Aja FZ. Unlike observations from active transform faults, no low-velocity anomaly is observed at the Aja FZ suggesting that the crustal velocities have recovered to normal values through crack closure and crack healing. Higher lower crustal velocities (∼7.3 and > 7.5 km/s) and thicker crust (∼8.5 and ∼7.0 km) are observed near the Pratt and Durgin Seamounts and at the intersection of the Kodiak-Bowie Seamount Chain linear trend, respectively. These observations are attributed to magmatic underplating associated with seamount province magmatism. Lithospheric thickness variations across the Aja FZ may form a barrier or impediment to magmatic flow. The thickest crust (8.5 km) along our two profiles is located on the younger side of the FZ, and we suggest that the majority of magmatism jumped south of the Aja FZ when thinner lithosphere was encountered by the Bowie hot spot. The crustal structure near the Kodiak-Bowie Seamount Chain is most similar to that of other seamounts and guyots that formed on similarly young lithosphere (8–12 Ma). Our results suggest that lithospheric thickness at the time of hot spot interaction has a large control on magmatic underplating at seamounts and seamount provinces.

Alaska↗

USGS2021

Colored shaded-relief bathymetry, acoustic backscatter, and selected perspective views of the northern part of the California Continental Borderland, southern California

The California Continental Borderland is the complex continental margin in southern California that extends from Point Conception southward into northern Baja California (Fisher and others, 2009). This colored shaded-relief bathymetry map of the northern continental borderland in southern California was generated primarily from multibeam-echosounder data collected by the University of Washington in 2016, the Ocean Exploration Trust-Nautilus Exploration Program in 2015–17, and the National Oceanic and Atmospheric Administration in 2017. These datasets were processed in part by the U.S. Geological Survey. Additional smaller amounts of publicly available multibeam-bathymetry data collected by other federal and local agencies, academic institutions, and private firms were also incorporated into this map. Since the production of this map, other multibeam-bathymetry data have been collected in this region.

California↗

USGS2021

Toward an integrative geological and geophysical view of Cascadia subduction zone earthquakes

The Cascadia subduction zone (CSZ) is an exceptional geologic environment for recording evidence of land level changes, tsunamis, and ground motion that reveals at least 19 great megathrust earthquakes over the past 10 kyr. Such earthquakes are among the most impactful natural hazards on Earth, transcend national boundaries, and can have global impact. Reducing the societal impacts of future events in the U.S. Pacific Northwest and coastal British Columbia, Canada requires improved scientific understanding of megathrust earthquake rupture, recurrence, and corresponding hazards. Despite substantial knowledge gained from decades of research, large uncertainties remain about the characteristics and frequencies of past CSZ earthquakes. In this review, we summarize geological, geophysical, and instrumental evidence relevant to understanding megathrust earthquakes along the CSZ and associated uncertainties. We discuss how the evidence constrains various models of great megathrust earthquake recurrence in Cascadia and identify potential paths forward for the earthquake science community.

British Columbia, Oregon, Washington↗

USGS2021

California deepwater investigations and groundtruthing (Cal DIG) I: Fault and shallow geohazard analysis offshore Morro Bay

The California Deepwater Investigations and Groundtruthing (Cal DIG) I project focuses on the potential seafloor hazards and impacts of alternative energy infrastructure in the outer continental shelf region offshore of south-central California. This is one of three reports covering a single study area located between Monterey and Point Conception, California in federal waters outside of the State of California three nautical mile limit and in water depths of 400 to 1500 meters. The goal of this report is to provide baseline geologic interpretations of the area for the purpose of improving regional models of shallow geologic hazards and sedimentary processes. Geophysical and geological data from this project will help to address important issues associated with marine spatial planning and potential offshore infrastructure development, such as offshore floating wind turbines. Datasets covered in this report include comprehensive high-resolution sub-bottom (multi-channel and Chirp seismic reflection profiles), seafloor (bathymetry), and sampling (piston, gravity, and vibracore) data collected in 2018-2019 during a series of seven seagoing geological and geophysical surveys. Specifically, this report outlines interpretation of subsurface geologic structure from the geophysical data, details preliminary core analysis results related to fluid, gas, and sediment transport activity, provides interpretations of the current geohazards in the area, and suggests next steps for improving interpretations of geohazard processes. Specific targets of geohazard interest in the study area are geological structures such as faults and folds, seafloor pockmarks within a large field (the Big Sur pockmark field), submarine channels, and mass wasting (slope failure) features. The vast majority of faults and other structures in the study occur within sediment and rock formations we interpret to be pre-Quaternary (older than 2.58 Myr BP), and thus we interpret that these structures are unlikely to present significant current hazard to seabed infrastructure, although we note that the numerous structures mapped in the study area may have the potential to become reactivated. Similarly, we find no new evidence of Holocene (younger than 11,650 years BP) fluid or gas advection in the Big Sur pockmark field. However, such fluid and gas hazards are currently difficult to assess, as additional analyses and sampling of existing core data is needed to better understand pockmark formation processes and potential gas accumulations we have mapped in the subsurface. Mass wasting along the eastern and western edges of the Santa Lucia Bank during earthquakes, as well as sediment transport down the Lucia Chica and San Simeon channels, are among the most significant, although still likely infrequent during the Holocene, hazards to seabed stability in the study area. Further analyses of the existing cores, including radiocarbon dating, stable isotope, and compositional analyses, are again needed to better understand the timing and sources of the numerous sand deposits found throughout the study area, which may have been transported downslope due to mass wasting and/or earthquake shaking processes.

California↗

USGS2020

Morphology, structure, and kinematics of the San Clemente and Catalina faults based on high-resolution marine geophysical data, southern California Inner Continental Borderland

Catalina Basin, located within the southern California Inner Continental Borderland (ICB), is traversed by two active submerged fault systems that are part of the broader North America-Pacific plate boundary: the San Clemente fault (along with a prominent splay, the Kimki fault) and the Catalina fault. Previous studies have suggested that the San Clemente fault (SCF) may be accommodating up to half of the approximately 8 mm/yr right-lateral slip distributed across the ICB between San Clemente Island and the mainland coast, and that the Catalina fault (CF) acts as a significant restraining bend in the larger transform system. Here, we provide new high-resolution geophysical constraints on the seabed morphology, deformation history, and kinematics of the active faults in and on the margins of Catalina Basin. We significantly revise SCF mapping and describe a discrete releasing bend that corresponds with lows in gravity and magnetic anomalies, as well as a connection between the SCF and the Santa Cruz fault to the north. Subsurface seismic-reflection data show evidence for a vertical SCF with significant lateral offsets, while the CF exhibits lesser cumulative deformation with a vertical component indicated by folding adjacent to the CF. Geodetic data are consistent with SCF right-lateral slip rates as high as ~3.6 mm/yr and transpressional convergence of <1.5 mm/yr accommodated along the CF. The Quaternary strands of the SCF and CF consistently cut across Miocene and Pliocene structures, suggesting generation of basin and ridge morphology in a previous tectonic environment that has been overprinted by Quaternary transpression. Some inherited crustal fabrics, especially thinned crust and localized, relatively hard crustal blocks, appear to have had a strong influence on the geometry of the main trace of the SCF, whereas inherited faults and other structures (e.g., the Catalina Ridge) appear to have minimal influence on the geometry of active faults in the ICB.

California↗

USGS2020

Active steady-state creep on a nontectonic normal fault in southeast Utah: Implications for strain release in a rapidly deforming salt system

Characterizing short-term temporal variations of fault creep provides insight into the evolution, mechanics, and strength of fault systems. Using spirit leveling and an extensome- ter, we measured surface displacement of a fault southwest of the Needles District, Canyon- lands National Park, Utah, where extension is driven by differential unloading of a subsur- face salt layer due to incision of the Colorado River. Results show continuous creep at max- imum rates of 0.7±0.2 mm/yr without large temporal variations typical of episodic creep events. Occasional, minor transient events in fault slip velocity coincided with water infil- tration; however, we found no significant relationship between precipitation and transient events. Detailed mapping of regionally widespread, fault-parallel sinkholes provide evidence for dilation of faults at shallow depth, a process that lowers fault strength. We propose con- tinuous slip is related to low fault strength and differential unloading, as opposed to other salt systems where dissolution has been linked to episodic slip.

Southeastern Utah↗

USGS2019

Seismic velocity structure across the 2013 Craig, Alaska rupture from aftershock tomography: Implications for seismogenic conditions

The 2013 Craig, Alaska M W 7.5 earthquake ruptured along ∼150 km of the Queen Charlotte Fault (QCF), a right-lateral strike-slip plate boundary fault separating the Pacific and North American plates. Regional shear wave analyses suggest that the Craig earthquake rupturepropagated in the northward direction faster than the S-wave (supershear). Theoretical studies suggest that a bimaterial interface, such as that along the QCF, which separates oceanic and continental crust with differing elastic properties, can promote supershear rupture propagation. We deployed short-period ocean-bottom seismometers (OBS) as a part of a rapid-response effort less than four months after the Craig earthquake mainshock. During a 21-day period, 1,133 aftershocks were recorded by 8 OBS instruments. Aftershock spatial distribution indicates that the base of the seismogenic zone along the QCF approaches ∼25 km depth, consistent with a thermally-controlled fault rheology expected for igneous rocks at oceanic transform faults. The spatial distribution also provides supporting evidence for a previously hypothesized active strand of the QCF system within the Pacific Plate. Tomographic traveltime inversion for velocity structure indicates a low-velocity (V P and V S ) zone on the Pacific side of the plate boundary at 5–20 km depths, where NeogenePacific crust and upper mantle seismic velocities average ∼3–11% slower than the North American side, where the Paleozoic North American crust is seismically faster. Our results suggest that elastic properties along the studied portion of the QCF are different than those of a simple oceanic–continental plate boundary fault. In our study region, velocity structure across the QCF, while bimaterial, does not support faster material on the west side of the fault, which has been proposed as one possible explanation for northward supershear propagation during the Craig earthquake. Instead, we image low-velocity material on the west side of the fault. Explanations could include that part of the rupture was subshear, or that fault damage zone properties or fault smoothness are more important controls on supershear rupture than a bimaterial contrast.

Alaska↗

USGS2018

Submarine deposition of a subaerial landslide in Taan Fiord, Alaska

A large subaerial landslide entered Taan Fiord, Alaska, on 17 October 2015 producing a tsunami with runup to 193 m. We use LiDAR data to show the slide volume to be 76 + 3/−4 million cubic meters and that 51,000,000 m 3 entered Taan Fiord. In 2016, we mapped the fjord with multibeam bathymetry and high‐resolution seismic data. Landslide and postlandslide deposits extend 6 km downfjord, are up to 70 ± 11 m thick, and have a total volume of ~147,000,000 m 3 . Seismic data image a blocky landslide unit and two units deposited immediately after the landslide. The blocky landslide unit is ~65,000,000 m 3 . We infer it consists dominantly of subaerially derived material and secondarily of fjord floor sediment. The overlying units are likely megaturbidites presumably deposited within minutes to days after the landslide. We infer that these deposits dominantly consist of fjord floor material mobilized and suspended as the slide entered and traveled downfjord. The lower postlandslide unit is up to 35 ± 6 m thick, and the upper unit is up to 12 ± 3 m thick. These deposits are distinctive and will leave a lasting record of the event. This subaerial‐to‐submarine landslide deposit is distinct from other submarine landslide deposits studied in Alaskan fjords because it has a much greater thickness, larger and more angular blocks, distinctive postlandslide megaturbidites, and a higher‐amplitude acoustic signature of the blocky deposit. The tight constraints on the landslide source and deposit volumes, topography, bathymetry, and tsunami runup heights and flow directions should make this a benchmark site for landslide‐tsunami models.

Alaska↗

USGS2018

The 2015 landslide and tsunami in Taan Fiord, Alaska

Glacial retreat in recent decades has exposed unstable slopes and allowed deep water to extend beneath some of those slopes. Slope failure at the terminus of Tyndall Glacier on 17 October 2015 sent 180 million tons of rock into Taan Fiord, Alaska. The resulting tsunami reached elevations as high as 193 m, one of the highest tsunami runups ever documented worldwide. Precursory deformation began decades before failure, and the event left a distinct sedimentary record, showing that geologic evidence can help understand past occurrences of similar events, and might provide forewarning. The event was detected within hours through automated seismological techniques, which also estimated the mass and direction of the slide - all of which were later confirmed by remote sensing. Our field observations provide a benchmark for modeling landslide and tsunami hazards. Inverse and forward modeling can provide the framework of a detailed understanding of the geologic and hazards implications of similar events. Our results call attention to an indirect effect of climate change that is increasing the frequency and magnitude of natural hazards near glaciated mountains.

Alaska↗

USGS2018

The tectonically controlled San Gabriel Channel–Lobe Transition Zone, Catalina Basin, Southern California Borderland

High-resolution geophysical data across the Catalina Basin, offshore southern California, USA, reveal a complex channel–lobe transition zone (CLTZ) and provide an opportunity to characterize an entire seafloor CLTZ in a tectonically active and confined-basin setting. The seafloor morphology, distribution of depositional and erosional features, and location of depocenters in the CLTZ are controlled by shifting confinement and seafloor gradient related to inherited basement structures, active faults, and basin margins. Below a Holocene hemipelagic drape, the Catalina Basin is dominated by CLTZ and lobe sedimentation from the San Gabriel Channel, with lesser accumulations from local sediment sources limited to basin margins. The San Gabriel Channel is structurally confined as it enters the Catalina Basin and appears unable to avulse; it continues into the basin as a channel that rapidly widens, decreases in relief, and becomes scoured at its margins. A CLTZ is imaged between the confined San Gabriel channel and its terminal lobes deposited > 50 km into the basin. Narrow, apparently disconnected channels with knickpoints occur throughout the proximal and mid-CLTZ and are concentrated near basement highs and basin-bounding Quaternary-active dextral strike-slip faults. A field of small-scale erosional crescent-shaped scours (∼ 100 m length, ∼ 200 m width, up to ∼ 10 m relief across ∼ 30 km 2 region) occurs above a partially buried basement high that creates perturbations in seafloor gradient. Likewise, above a buried basement structure that locally increases seafloor gradient (up to 0.4°), the distal CLTZ may contain sediment waves (∼ 2–4 m wave height and ∼ 200–300 m wavelength) that are smaller than many other CLTZ examples. This study of the San Gabriel CLTZ in Catalina Basin provides high-resolution geophysical data coverage of a complete CLTZ and illustrates a tectonically controlled end-member CLTZ from the modern seafloor.

Journal of Sedimentary Research↗

USGS2018

Slope failure and mass transport processes along the Queen Charlotte Fault Zone, western British Columbia

Multibeam echosounder (MBES) images, 3.5 kHz seismic-reflection profiles and piston cores obtained along the southern Queen Charlotte Fault Zone are used to map and date mass-wasting events at this transform margin – a seismically active boundary that separates the Pacific Plate from the North American Plate. Whereas the upper continental slope adjacent to and east (upslope) of the fault zone offshore of the Haida Gwaii is heavily gullied, few large-sized submarine landslides in this area are observed in the MBES images. However, smaller submarine seafloor slides exist locally in areas where fluid flow appears to be occurring and large seafloor slides have recently been detected at the base of the steep continental slope just above its contact with the abyssal plain on the Queen Charlotte Terrace. In addition, along the subtle slope re-entrant area offshore of the Dixon Entrance shelf bathymetric data suggest that extensive mass wasting has occurred in the vicinity of an active mud volcano venting gas. We surmise that the relative lack of submarine slides along the upper slope in close proximity to the Queen Charlotte Fault Zone may be the result of seismic strengthening (compaction and cohesion) of a sediment-starved shelf and slope through multiple seismic events.

British Columbia↗

USGS2018

Slope failure and mass transport processes along the Queen Charlotte Fault, southeastern Alaska

The Queen Charlotte Fault defines the Pacific–North America transform plate boundary in western Canada and southeastern Alaska for c. 900 km. The entire length of the fault is submerged along a continental margin dominated by Quaternary glacial processes, yet the geomorphology along the margin has never been systematically examined due to the absence of high-resolution seafloor mapping data. Hence the geological processes that influence the distribution, character and timing of mass transport events and their associated hazards remain poorly understood. Here we develop a classification of the first-order shape of the continental shelf, slope and rise to examine potential relationships between form and process dominance. We found that the margin can be split into six geomorphic groups that vary smoothly from north to south between two basic end-members. The northernmost group (west of Chichagof Island, Alaska) is characterized by concave-upwards slope profiles, gentle slope gradients (<6°) and relatively low along-strike variance, all features characteristic of sediment-dominated siliciclastic margins. Dendritic submarine canyon/channel networks and retrogressive failure complexes along relatively gentle slope gradients are observed throughout the region, suggesting that high rates of Quaternary sediment delivery and accumulation played a fundamental part in mass transport processes. Individual failures range in area from 0.02 to 70 km2 and display scarp heights between 10 and 250 m. Transpression along the Queen Charlotte Fault increases southwards and the slope physiography is thus progressively more influenced by regional-scale tectonic deformation. The southernmost group (west of Haida Gwaii, British Columbia) defines the tectonically dominated end-member: the continental slope is characterized by steep gradients (>20°) along the flanks of broad, margin-parallel ridges and valleys. Mass transport features in the tectonically dominated areas are mostly observed along steep escarpments and the larger slides (up to 10 km2) appear to be failures of consolidated material along the flanks of tectonic features. Overall, these observations highlight the role of first-order margin physiography on the distribution and type of submarine landslides expected to occur in particular morphological settings. The sediment-dominated end-member allows for the accumulation of under-consolidated Quaternary sediments and shows larger, more frequent slides; the rugged physiography of the tectonically dominated end-member leads to sediment bypass and the collapse of uplifted tectonic features. The maximum and average dimensions of slides are an order of magnitude smaller than those of slides observed along other (passive) glaciated margins. We propose that the general patterns observed in slide distribution are caused by the interplay between tectonic activity (long- and short-term) and sediment delivery. The recurrence (<100 years) of M > 7 earthquakes along the Queen Charlotte Fault may generate small, but frequent, failures of under-consolidated Quaternary sediments within the sediment-dominated regions. By contrast, the tectonically dominated regions are characterized by the bypass of Quaternary sediments to the continental rise and the less frequent collapse of steep, uplifted and consolidated sediments.

Alaska↗

USGS2018

Seafloor fluid seeps on Kimki Ridge, offshore southern California: Links to active strike-slip faulting

The Kimki Ridge fluid seeps are located in western Catalina Basin about 60 km southwest of the southern California mainland and at a water depth of approximately 1100 m. Multichannel seismic reflection profiles collected by the U.S. Geological Survey (USGS) in 2014 show acoustic transparency within the Kimki Ridge, suggesting the possibility of fluid seeps and possible sub-seafloor fluid pathways. Subsequent multibeam bathymetric and backscatter intensity data collected during a cooperative University of Washington/USGS cruise in early 2016 show subtle seafloor buildups with high acoustic backscatter (reflectivity) in three places along Kimki Ridge, supporting the existence of fluid seepage. A Remotely Operated Vehicle (ROV) dive, conducted as part of the Nautilus Exploration Program, took place in August 2016 to confirm the presence of these previously unknown seeps and document their characteristics as well as those of any associated biological communities. Two of the three seeps were explored by ROV, and showed abundant evidence of fluid seepage, including characteristic algal mats, chemosynthetic clams, and authigenic carbonate formation. The seeps are comprised of carbonate buildups 1–3 m thick and 300–500 m across. Within these areas, we interpret broad crater-like depressions 30–50 m across and 1–2 m deep to be individual seep vents. The seep areas appear to be broad zones of diffuse seepage that support chemosynthetic biologic communities; however, active venting was not observed. Geochemical analyses of rock samples collected from the seeps indicate microbially driven anaerobic oxidation of methane at or near the sediment water interface. Seismic-reflection profiles show chimney-like fluid pathways along the limbs and in the axis of the fold forming Kimki Ridge, and evidence of methane in shallow sediments can be traced into the adjacent Catalina Basin. A system of closely spaced faults located at the axis of the Kimki Ridge anticline may serve as pathways to allow fluid flow to the seafloor. Our data are consistent with other studies that suggest that transpression is an important component in the formation and localization of fluid seeps in a strike-slip setting, implying that seep formation may be a common occurrence at fault stepovers or transpressional bends in strike-slip systems.

California↗

USGS2015

Basement and regional structure along strike of the Queen Charlotte Fault in the context of modern and historical earthquake ruptures

The Queen Charlotte fault (QCF) is a dextral transform system located offshore of southeastern Alaska and western Canada, accommodating &sim;4.4  cm/yr of relative motion between the Pacific and North American plates. Oblique convergence along the fault increases southward, and how this convergence is accommodated is still debated. Using seismic reflection data, we interpret offshore basement structure, faulting, and stratigraphy to provide a geological context for two recent earthquakes, an M w 7.5 strike‐slip event near Craig, Alaska, and an M w 7.8 thrust event near Haida Gwaii, Canada. We map downwarped Pacific oceanic crust near 54° N, between the two rupture zones. Observed downwarping decreases north and south of 54° N, parallel to the strike of the QCF. Bending of the Pacific plate here may have initiated with increased convergence rates due to a plate motion change at &sim;6  Ma. Tectonic reconstruction implies convergence‐driven Pacific plate flexure, beginning at 6 Ma south of a 10° bend the QCF (which is currently at 53.2° N) and lasting until the plate translated past the bend by &sim;2  Ma. Normal‐faulted approximately late Miocene sediment above the deep flexural depression at 54° N, topped by relatively undeformed Pleistocene and younger sediment, supports this model. Aftershocks of the Haida Gwaii event indicate a normal‐faulting stress regime, suggesting present‐day plate flexure and underthrusting, which is also consistent with reconstruction of past conditions. We thus favor a Pacific plate underthrusting model to initiate flexure and accommodation space for sediment loading. In addition, mapped structures indicate two possible fault segment boundaries along the QCF at 53.2° N and at 56° N.

Alaska↗

USGS2014

Dynamic response to strike-slip tectonic control on the deposition and evolution of the Baranof Fan, Gulf of Alaska

The Baranof Fan is one of three large deep-sea fans in the Gulf of Alaska, and is a key component in understanding large-scale erosion and sedimentation patterns for southeast Alaska and western Canada. We integrate new and existing seismic reflection profiles to provide new constraints on the Baranof Fan area, geometry, volume, and channel development. We estimate the fan’s area and total sediment volume to be &sim;323,000 km 2 and &sim;301,000 km 3 , respectively, making it among the largest deep-sea fans in the world. We show that the Baranof Fan consists of channel-levee deposits from at least three distinct aggradational channel systems: the currently active Horizon and Mukluk channels, and the waning system we call the Baranof channel. The oldest sedimentary deposits are in the northern fan, and the youngest deposits at the fan’s southern extent; in addition, the channels seem to avulse southward consistently through time. We suggest that Baranof Fan sediment is sourced from the Coast Mountains in southeastern Alaska, transported offshore most recently via fjord to glacial sea valley conduits. Because of the translation of the Pacific plate northwest past sediment sources on the North American plate along the Queen Charlotte strike-slip fault, we suggest that new channel formation, channel beheadings, and southward-migrating channel avulsions have been influenced by regional tectonics. Using a simplified tectonic reconstruction assuming a constant Pacific plate motion of 4.4 cm/yr, we estimate that Baranof Fan deposition initiated ca. 7 Ma.

Geosphere↗