USGS Science⌕ Search

Geology topics

L. J. Poppe

Publications and source records attributed to L. J. Poppe.

At least 37 records · Page 2Linked to original sources
USGS2008

Estuarine sediment transport by gravity-driven movement of the nepheloid layer, Long Island Sound

Interpretation of sidescan-sonar imagery provides evidence that down-slope gravity-driven movement of the nepheloid layer constitutes an important mode of transporting sediment into the basins of north-central Long Island Sound, a major US East Coast estuary. In the Western Basin, this transport mechanism has formed dendritic drainage systems characterized by branching patterns of low backscatter on the seafloor that exceed 7.4 km in length and progressively widen down-slope, reaching widths of over 0.6 km at their southern distal ends. Although much smaller, dendritic patterns of similar morphology are also present in the northwestern part of the Central Basin. Because many contaminants display affinities for adsorption onto fine-grained sediments, and because the Sound is affected by seasonal hypoxia, mechanisms and dispersal pathways by which inorganic and organic sediments are remobilized and transported impact the eventual fate of the contaminants and environmental health of the estuary.

Connecticut, Massachussetts, New York↗
USGS2008

A Visual Basic program to plot sediment grain-size data on ternary diagrams

Sedimentologic datasets are typically large and compiled into tables or databases, but pure numerical information can be difficult to understand and interpret. Thus, scientists commonly use graphical representations to reduce complexities, recognize trends and patterns in the data, and develop hypotheses. Of the graphical techniques, one of the most common methods used by sedimentologists is to plot the basic gravel, sand, silt, and clay percentages on equilateral triangular diagrams. This means of presenting data is simple and facilitates rapid classification of sediments and comparison of samples. The original classification scheme developed by Shepard (1954) used a single ternary diagram with sand, silt, and clay in the corners and 10 categories to graphically show the relative proportions among these three grades within a sample. This scheme, however, did not allow for sediments with significant amounts of gravel. Therefore, Shepard's classification scheme was later modified by the addition of a second ternary diagram with two categories to account for gravel and gravelly sediment (Schlee, 1973). The system devised by Folk (1954, 1974)\ is also based on two triangular diagrams, but it has 21 categories and uses the term mud (defined as silt plus clay). Patterns within the triangles of both systems differ, as does the emphasis placed on gravel. For example, in the system described by Shepard, gravelly sediments have more than 10% gravel; in Folk's system, slightly gravelly sediments have as little as 0.01% gravel. Folk's classification scheme stresses gravel because its concentration is a function of the highest current velocity at the time of deposition as is the maximum grain size of the detritus that is available; Shepard's classification scheme emphasizes the ratios of sand, silt, and clay because they reflect sorting and reworking (Poppe et al., 2005). The program described herein (SEDPLOT) generates verbal equivalents and ternary diagrams to characterize sediment grain-size distributions. It is written in Microsoft Visual Basic 6.0 and provides a window to facilitate program execution. The inputs for the sediment fractions are percentages of gravel, sand, silt, and clay in the Wentworth (1922) grade scale, and the program permits the user to select output in either the Shepard (1954) classification scheme, modified as described above, or the Folk (1954, 1974) scheme. Users select options primarily with mouse-click events and through interactive dialogue boxes. This program is intended as a companion to other Visual Basic software we have developed to process sediment data (Poppe et al., 2003, 2004).

Computers & Geosciences↗
USGS2008

Sidescan-sonar imagery and surficial geologic interpretations of the sea floor in central Rhode Island Sound

The U.S. Geological Survey (USGS) has been working with the National Oceanic and Atmospheric Administration (NOAA) to interpret the surficial geology of areas along the northeastern coast of the United States. During 2004, the NOAA Ship RUDE conducted Hydrographic Survey H11321 in Rhode Island Sound. This sidescan-sonar and bathymetry survey covers an area of 93 km? located 12 km southeast of Brenton Point, RI in water depths of 28-39 m (fig. 1). The purpose of this report is to delineate sea floor features and sedimentary environments of this area in central Rhode Island Sound using sidescan-sonar and bathymetric data from NOAA Survey H11321 and seismic-reflection data from a previous USGS field study (Needell and others, 1983a). This is important for the study of benthic habitats and provides a framework for future research. Prior work in this area includes the mapping of surface sediments and surficial geology. McMaster (1960) collected sediment samples from Rhode Island Sound and Narragansett Bay and mapped our study area as having a sandy sea floor. In addition, one sample of sand from the National Ocean Service (NOS) Hydrographic Database came from a location in the northeast part of our study area in 1939 (fig. 2; Poppe and others, 2003). McMaster and others (1968) used seismic-reflection profiles to map the locations of a cuesta of Cretaceous sediments crossing Rhode Island Sound and post-Cretaceous drainage channels. Knebel and others (1982) identified sedimentary environments in Rhode Island Sound using sidescan sonographs. Needell and others (1983b) studied the Quaternary geology and mapped the structure, sedimentary environments, and geologic hazards in Rhode Island Sound using sidescan-sonar and seismic-reflection data. Sidescan-sonar and bathymetric data from NOAA Survey H11320, which overlaps the far eastern edge of our study area, was interpreted to consist of basins surrounded by a moraine and bathymetric highs composed of till with areas of rocks, sand waves, hummocks, glaciolacustrine erosional outliers, small scarps and elongate hills (fig. 1; McMullen and others, 2007). Some of those features extend into this study area.

Rhode Island↗
USGS2008

Interpolation of reconnaissance multibeam and single-beam bathymetry offshore of Milford, Connecticut

This report releases echosounder data from the northern part of the National Oceanic and Atmospheric Administration (NOAA) hydrographic survey H11044 in Long Island Sound, off Milford, Connecticut. The data have been interpolated and regridded into a complete-coverage data set and image of the sea floor. The grid produced as a result of the interpolation is at 10-m resolution. These data extend an already published set of reprocessed bathymetric data from the southern part of survey H11044. In Long Island Sound, the U.S. Geological Survey, in cooperation with NOAA and the Connecticut Department of Environmental Protection, is producing detailed maps of the sea floor. Part of the current phase of research involves studies of sea-floor topography and its effect on the distributions of sedimentary environments and benthic habitats. This data set provides a more continuous perspective of the sea floor than was previously available. It helps to define topographic variability and benthic-habitat diversity for the area and improves our understanding of oceanographic processes controlling the distribution of sediments and benthic habitats. Inasmuch as precise information on environmental setting is important for selecting sampling sites and accurately interpreting point measurements, this data set can also serve as a base map for subsequent sedimentological, geochemical, and biological research.

Connecticut↗
USGS2008

Enhanced sidescan-sonar imagery, north-central Long Island Sound

The U.S. Geological Survey, National Oceanic and Atmospheric Administration (NOAA), and Connecticut Department of Environmental Protection have been working cooperatively to map the sea-floor geology within Long Island Sound. Sidescan-sonar imagery collected during three NOAA hydrographic surveys (H11043, H11044, and H11045) was used to interpret the surficial-sediment distribution and sedimentary environments within the Sound. The original sidescan-sonar imagery generated by NOAA was used to evaluate hazards to navigation, which does not require consistent tonal matching throughout the survey. In order to fully utilize these data for geologic interpretation, artifacts within the imagery, primarily due to sidescan-system settings (for example, gain changes), processing techniques (for example, lack of across-track normalization) and environmental noise (for example, sea state), need to be minimized. Sidescan-sonar imagery from surveys H11043, H11044, and H11045 in north-central Long Island Sound was enhanced by matching the grayscale tones between adjacent sidescan-sonar lines to decrease the patchwork effect caused by numerous artifacts and to provide a more coherent sidescan-sonar image for use in geologic interpretation.

New York, Connecticut↗
USGS2007

Geologic interpretation and multibeam bathymetry of the sea floor in the vicinity of the Race, eastern Long Island Sound

Digital terrain models (DTMs) produced from multibeam bathymetric data provide valuable base maps for marine geological interpretations (Todd and others, 1999; Mosher and Thomson, 2002; ten Brink and others, 2004; Poppe and others, 2006a, b, c, d). These maps help define the geological variability of the sea floor (one of the primary controls of benthic habitat diversity), improve our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats and associated infaunal community structures, and provide a detailed framework for future research, monitoring, and management activities. The bathymetric survey interpreted herein (National Oceanic and Atmospheric Administration (NOAA) survey H11250) covers roughly 94 km² of sea floor in an area where a depression along the Orient Point-Fishers Island segment of the Harbor Hill-Roanoke Point-Charlestown Moraine forms the Race, the eastern opening to Long Island Sound. The Race also divides easternmost Long Island Sound from northwestern Block Island Sound (fig. 1). This bathymetry has been examined in relation to seismic reflection data collected concurrently, as well as archived seismic profiles acquired as part of a long-standing geologic mapping partnership between the State of Connecticut and the U.S. Geological Survey (USGS). The objective of this work was to use these acoustic data sets to interpret geomorphological attributes of the sea floor, and to use these interpretations to better understand the Quaternary geologic history and modern sedimentary processes.

Connecticut;New York↗
USGS2007

The geology of Six Mile Reef, eastern Long Island Sound

Digital terrain models, which can be produced from multibeam bathymetric data, are ordered arrays of depths for a number of sea-floor positions sampled at regularly spaced intervals. These models provide valuable base maps for marine geological interpretations that help define the variability of the sea floor (one of the primary controls of benthic habitat diversity), improve our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats, and provide a detailed framework to guide and assist future research, monitoring, and management activities. The bathymetry interpreted herein was processed from data collected by National Oceanic and Atmospheric Administration vessels during hydrographic surveys H11361 and H11252. These surveys mapped roughly 156 km² of sea floor in the vicinity of Six Mile Reef, an area of eastern Long Island Sound where the sea floor is characterized by fields of large sand waves and an east-west decreasing gradient of bottom tidal-current speeds (fig. 1). Interpretations of the bathymetry are supplemented by concurrently collected seismic reflection data, as well as archived historic seismic profiles, sediment samples and bottom photography collected as part of a long-standing geologic mapping partnership between the State of Connecticut and the U.S. Geological Survey (fig. 2). The purpose of this digital report is 1) to provide the acoustic data layers produced during the above mentioned surveys, 2) to use them to describe the sea-floor character and bedform morphologies near Six Mile Reef, and 3) to relate these descriptions to ongoing processes and sedimentary environments.

Connecticut, New York↗
USGS2006

Character and distribution of exposed glaciodeltaic deposits off outer Cape Cod, Massachusetts, and their effects on hydrogeology and benthic habitats

Seabed outcrops of glaciodeltaic sediments were identified in four places east of Cape Cod, Massachusetts, during seismic-reflection, multibeam bathymetric and backscatter, bottom photographic, and sediment sampling surveys. These strata record coarser-grained ice-proximal glaciofluvial topset to finer-grained distal glaciolacustrine bottomset deposition within deltaic systems that prograded southwestward into glacial lakes from the South Channel lobe about 18 ka B.P. These beds are important because they (1) influence the outer Cape's hydrogeologic framework, and (2) constitute relatively stable, locally rough habitats within an area of seafloor dominated by mobile sand and gravelly sediment, and benefit the benthic fauna by providing shelter and a substrate amenable to burrow construction. ?? Springer-Verlag 2006.

Massachusetts↗
USGS2005

Surficial geologic interpretation and sidescan sonar imagery of the sea floor in west-central Long Island Sound

The United States Geological Survey (USGS) is working cooperatively with the National Oceanic and Atmospheric Administration (NOAA) and Connecticut Department of Environmental Protection (CT-DEP) to conduct detailed studies of the surficial geology in Long Island Sound (LIS). The study goals are to interpret sedimentary environments within the Sound, to further understand processes controlling sediment distribution, and to provide a framework for future studies. Sidescan-sonar mosaics produced by USGS and NOAA show detailed acoustic images of the sea floor with 1- m resolution. These images, along with data obtained from sediment samples, seismic-reflection profiles, and seafloor video, are used to interpret the surficial geology. As part of this cooperative program, since 1995, 12 sidescan-sonar surveys of the LIS sea floor have been completed (Poppe and others, 1997; Twichell and others, 1997; Poppe and others, 1998a; Poppe and others, 1998b; Twichell and others, 1998; Poppe and others, 1999a; Poppe and others, 1999b; Poppe and others, 2001; Poppe and others, 2004; Zajac and others, 2003). The purpose of this report is to release digital versions of the imagery and interpretations from NOAA survey H11044 originally published in McMullen and others (2005). Survey H11044, which covers an area of 293 km 2 in west-central LIS , includes the area of the previously published Milford Survey (Twichell and others, 1998) and the westernmost part of the New Haven Harbor Survey (Poppe and others, 2001). These two surveys detailed surficial geology and mapped sediment distributions. In this study, we map the sediment distribution across a broader, previously unstudied area and the sedimentary environments.

Connecticut↗
USGS2004

A visual basic program to generate sediment grain-size statistics and to extrapolate particle distributions

Measures that describe and summarize sediment grain-size distributions are important to geologists because of the large amount of information contained in textural data sets. Statistical methods are usually employed to simplify the necessary comparisons among samples and quantify the observed differences. The two statistical methods most commonly used by sedimentologists to describe particle distributions are mathematical moments (Krumbein and Pettijohn, 1938) and inclusive graphics (Folk, 1974). The choice of which of these statistical measures to use is typically governed by the amount of data available (Royse, 1970). If the entire distribution is known, the method of moments may be used; if the next to last accumulated percent is greater than 95, inclusive graphics statistics can be generated. Unfortunately, earlier programs designed to describe sediment grain-size distributions statistically do not run in a Windows environment, do not allow extrapolation of the distribution's tails, or do not generate both moment and graphic statistics (Kane and Hubert, 1963; Collias et al., 1963; Schlee and Webster, 1967; Poppe et al., 2000) 1 . Owing to analytical limitations, electro-resistance multichannel particle-size analyzers, such as Coulter Counters, commonly truncate the tails of the fine-fraction part of grain-size distributions. These devices do not detect fine clay in the 0.6–0.1 μm range (part of the 11-phi and all of the 12-phi and 13-phi fractions). Although size analyses performed down to 0.6 μm microns are adequate for most freshwater and near shore marine sediments, samples from many deeper water marine environments (e.g. rise and abyssal plain) may contain significant material in the fine clay fraction, and these analyses benefit from extrapolation. The program (GSSTAT) described herein generates statistics to characterize sediment grain-size distributions and can extrapolate the fine-grained end of the particle distribution. It is written in Microsoft Visual Basic 6.0 and provides a window to facilitate program execution. The input for the sediment fractions is weight percentages in whole-phi notation (Krumbein, 1934; Inman, 1952), and the program permits the user to select output in either method of moments or inclusive graphics statistics (Fig. 1). Users select options primarily with mouse-click events, or through interactive dialogue boxes.

Computers & Geosciences↗
USGS2004

Sidescan sonar imagery and surficial geologic interpretation of the sea floor off Branford, Connecticut

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Connecticut Department of Environmental Protection (CT DEP), Figure 1 - Map of Study Areahas produced detailed geologic maps of the sea floor in Long Island Sound, a major East Coast estuary surrounded by the most densely populated region of the United States. These studies have built upon cooperative research between the USGS and the State of Connecticut that was initiated in 1982. The current phase of this research program is directed toward studies of sea-floor sediment distribution, processes that control sediment distribution, nearshore environmental concerns, and the relation of benthic community structures to the sea-floor geology. Anthropogenic wastes, toxic chemicals, and changes in land-use patterns resulting from residential, commercial, and recreational development have stressed the environment of the Sound, causing degradation and potential loss of benthic habitats (Koppelman and others, 1976; Long Island Sound Study, 1994). Detailed maps of the sea floor are needed to help evaluate the extent of adverse impacts and to help wisely manage resources in the future. Therefore, in a continuing effort to better understand Long Island Sound, we are constructing and interpreting sidescan sonar mosaics (complete-coverage acoustic images of the sea floor) within specific areas of special interest (Poppe and Polloni, 1998). The mosaic presented herein, which was produced during survey H11043 by NOAA 's Atlantic Hydrographic Branch, covers approximately 41.1 km 2 of the sea floor in north-central Long Island Sound off Branford, Connecticut. Shell bed provides shelter for juvenille skate.The mosaic and its interpretation serve many purposes, including: (1) defining the geological variability of the sea floor, which is one of the primary controls of benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats and associated infaunal community structures; and (3) providing a detailed framework for future research, monitoring, and management activities. The sidescan sonar mosaic also serves as a base map for subsequent sedimentological, geochemical, and biological observations, because precise information on environmental setting is important for selection of sampling sites and for appropriate interpretation of point measurements.

Connecticut↗
USGS2004

Petrography and character of the bedrock surface beneath western Cape Cod, Massachusetts

Cores collected during recent drilling in western Cape Cod, Massachusetts provide insight into the topography and petrology of the underlying bedrock. 62 drill sites spread over a ???140 km2 study area produced cores of granitoids (31), orthogneisses (20), basalts/diabases (4), amphibolites (3), felsic mylonites (2), and dolomitic rock (2). Granitoid cores range in composition from granite to tonalite to quartz diorite, but are dominated by single-mica granites. Alteration is common in nearly all cores examined in this study, and is evidenced by the secondary growth of chlorite and epidote. The granitoids resemble rocks of the Dedham and Fall River terranes (Wones and Goldsmith 1991). Gneisses from the study area generally contain the mineral assemblage hornblende+plagioclase+quartz+biotite+epidote??chlorite?? sphene??K-feldspar??sericite+oxides. Based on mineral assemblages, we estimate peak metamorphic grade to be of lower amphibolite facies. X-ray powder diffraction of unmetamorphosed dolomitic cores shows presence of layered silicates (clays), plagioclase, and possible magnesite. Contours of the bedrock surface show locally irregular topography suggesting erosion by glacial scour. The distribution of lithologies suggests a possible continuation of the New Bedford gneissic terrane that outcrops 25 km to the west. Dolomitic rocks may represent a lithified fault gouge material at the eastern edge of the gneissic zone. Basalts/diabases are interpreted to be post-metamorphic dikes of Late Paleozoic age, or possibly associated with Mesozoic rifting.

Massachussets↗
USGS2003

A Visual Basic program to classify sediments based on gravel-sand-silt-clay ratios

Nomenclature describing size distributions is important to geologists because grain size is the most basic attribute of sediments. Traditionally, geologists have divided sediments into four size fractions that include gravel, sand, silt, and clay, and classified these sediments based on ratios of the various proportions of the fractions. Definitions of these fractions have long been standardized to the grade scale described by Wentworth (1922), and two main classification schemes have been adopted to describe the approximate relationship between the size fractions. Specifically, according to the Wentworth grade scale gravel-sized particles have a nominal diameter of ⩾2.0 mm; sand-sized particles have nominal diameters from <2.0 mm to ⩾62.5 μm; silt-sized particles have nominal diameters from <62.5 to ⩾4.0 μm; and clay is <4.0 μm. As for sediment classification, most sedimentologists use one of the systems described either by Shepard (1954) or Folk (1954, 1974). The original scheme devised by Shepard (1954) utilized a single ternary diagram with sand, silt, and clay in the corners to graphically show the relative proportions among these three grades within a sample. This scheme, however, does not allow for sediments with significant amounts of gravel. Therefore, Shepard's classification scheme (Fig. 1) was subsequently modified by the addition of a second ternary diagram to account for the gravel fraction (Schlee, 1973). The system devised by Folk (1954, 1974) is also based on two triangular diagrams (Fig. 2), but it has 23 major categories, and uses the term mud (defined as silt plus clay). The patterns within the triangles of both systems differ, as does the emphasis placed on gravel. For example, in the system described by Shepard, gravelly sediments have more than 10% gravel; in Folk's system, slightly gravelly sediments have as little as 0.01% gravel. Folk's classification scheme stresses gravel because its concentration is a function of the highest current velocity at the time of deposition, together with the maximum grain size of the detritus that is available; Shepard's classification scheme emphasizes the ratios of sand, silt, and clay because they reflect sorting and reworking (Poppe et al., 2000).

Computers & Geosciences↗
USGS2002

Geological framework data from Long Island Sound, 1981-1990: A digital data release

Introduction Since 1980 the Coastal and Marine Geology Program of the U.S. Geological Survey and Connecticut Department of Environmental Protection have conducted a joint program of cooperative geologic research in Long Island Sound and its vicinity. As part of this program, a highly successful regional-scale study of the geologic framework was completed. Reconnaissance high-resolution seismic reflection data were collected and used to establish the basic stratigraphy within the Sound and to map the major geologic units; field verification of the geologic interpretations of the seismic profiles was primarily accomplished with vibratory cores. These interpretations were in turn used to produce basin-wide syntheses of the late Quaternary depositional history. Unfortunately, the original seismic records and core logs were generated only in analog form. These unique paper documents, which are still under demand for industrial applications and academic research, are fragile and have become ragged from frequent use. The purpose of this report is to preserve these data by converting the seismic profiles, core descriptions, and ancillary reports into digital form, and to organize these files into a product that can be more readily accessed and disseminated. Not all of the existing high-resolution seismic-reflection surveys, collected in Long Island Sound through cooperatives with the U.S. Geological Survey and the Connecticut Department of Environmental Protection, have been incorporated into this report. These surveys, whose records are still in need of preprocessing and annotation, generally cover smaller areas along the Connecticut coast and were originally intended to provide additional detail to the larger, more regional data sets presented herein. The digital release of the omitted data sets is planned as part of a future product.

Connecticut, New York↗