Geology topics

L. J. Poppe

Publications and source records attributed to L. J. Poppe.

At least 19 recordsLinked to original sources

USGS2024

Effect of chlorine in clay-mineral specimens prepared on silver metal-membrane mounts for X-ray powder diffraction analysis

Silver metal-membrane filters are commonly used as substrates in the preparation of oriented clay-mineral specimens for X-ray powder diffraction (XRD). They are relatively unaffected by organic solvent treatments and specimens can be prepared rapidly. The filter mounts are adaptable to automatic sample changers, have few discrete reflections at higher 20 angles, and, because of the high atomic number of silver, produce a relatively low overall background compared with other membrane filters, such as cellulose (Poppe and Hathaway, 1979). The silver metal-membrane filters, however, present some problems after heat treatment if either the filters or the samples contain significant amounts of chlorine. At elevated temperature, the chloride ions react with the silver substrate to form crystalline compounds. These compounds change the mass-absorption coefficient of the sample, reducing peak intensities and areas and, therefore, complicating the semiquantitative estimation of clay minerals. A simple procedure that eliminates most of the chloride from a sample and the silver metal-membrane substrate is presented here.

Clays and Clay Minerals↗

USGS2013

Sea-floor geology and topography offshore in northeastern Long Island Sound

Datasets of gridded multibeam bathymetry, covering approximately 52.9 square kilometers, were used to interpret character and geology of the sea floor in northeastern Long Island Sound. Although originally collected for charting purposes during National Oceanic and Atmospheric Administration hydrographic survey H12012, these acoustic data and the sea-floor sampling and photography stations subsequently occupied to verify the acoustic data are interpreted (1) to define the composition and terrain of the seabed, (2) to provide information on sediment transport and benthic habitat, and (3) as part of an expanding series of studies that provide a fundamental framework for research and resource management (for example, cables, pipelines, and dredging) activities in this major east coast estuary.

Connecticut;New York↗

USGS2012

Sea-floor geology of Long Island Sound north of Duck Pond Point, New York

The U.S. Geological Survey, the National Oceanic and Atmospheric Administration (NOAA), and the Connecticut Department of Environmental Protection are mapping the sea floor in coastal areas of the northeastern United States. As part of the project, more than 100 square kilometers of multibeam-echosounder data, 23 sediment samples, bottom video, and 86 still photographs were obtained from an area in Long Island Sound north of Duck Pond Point, New York, in the study area of NOAA survey H11999. This report delineates the sediment types and sea-floor features found within this area in order to better understand the sea-floor processes occurring in this part of Long Island Sound. The sea floor in the study area is dominated by ubiquitous sand-wave fields and three northeast-southwest trending bathymetric depressions. Barchanoid and transverse sand waves, including sinusoidal, bifurcating, arced, and straight-crested morphologies, are variably present. Asymmetrical sand-wave profiles indicate a westward to southwestward direction of sediment transport in most of the study area; current ripples and megaripples on the stoss slopes of the sand waves indicate transport is ongoing. The majority of the sediment on the sea floor is sand, although bouldery, gravelly, and muddy sediments are also present. Gray, cohesive mud crops out on the walls of some of the scour depressions associated with the troughs of large sand waves. Clasts of the muddy sediment scattered on the sea floor around the depressions demonstrate the intensity of the scour and suggest erosion of the underlying distal deltaic sediments.

New York↗

USGS2012

Sea-floor geology and sedimentary processes in the vicinity of Cross Rip Channel, Nantucket Sound, offshore southeastern Massachusetts

Gridded multibeam bathymetry covers approximately 10.4 square kilometers of sea floor in the vicinity of Cross Rip Channel in Nantucket Sound, offshore southeastern Massachusetts. Although originally collected for charting purposes during National Oceanic and Atmospheric Administration hydrographic survey H12007, these acoustic data, and the sea-floor sediment sampling and bottom photography stations subsequently occupied to verify them, show the composition and terrain of the seabed and provide information on sediment transport and benthic habitat. This report is part of an expanding series of cooperative studies by the U.S. Geological Survey, National Oceanic and Atmospheric Administration, and Massachusetts Office of Coastal Zone Management that provide a fundamental framework for research and resource-management activities (for example, windfarms, pipelines, and dredging) along the inner continental shelf offshore of Massachusetts.

Massachusetts↗

USGS2012

Sea-floor geology in central Rhode Island Sound south of Sakonnet Point, Rhode Island

The U.S. Geological Survey (USGS) and the National Oceanic and Atmospheric Administration (NOAA) are working together to study the sea floor along the northeastern coast of the United States. NOAA collected multibeam-echosounder data during hydrographic survey H11995 in a 63-square-kilometer area in central Rhode Island Sound, south of Sakonnet Point, Rhode Island. The USGS collected sediment samples, bottom video, and still photographs from 27 stations in this study area to verify an interpretation of the bathymetric data. Collected data are used to map areas of scour depressions and erosional outliers, megaripples, boulders, and relatively undisturbed modern marine sediments. In general, much of the eastern part of the study area, a submerged segment of the Harbor Hill-Roanoke Point-Charlestown-Buzzards Bay moraine, is bouldery. Bottom photography shows boulders are generally encrusted with hydrozoans, algae, and anemone. Scour depressions, presumably formed by long-period storm waves, and erosional outliers of Holocene sediments dominate the western part of the study area and several large areas in the east. The scour depressions tend to have coarser grained sediment than intervening erosional outliers. The coarseness likely creates turbulence in the water over these areas, which prevents fine-grained sediment deposition. Several small areas of megaripples are visible in the bathymetry data in the west. Other sandy areas are typically rippled, with burrows, worm tubes, and starfish present.

Rhode Island↗

USGS2012

Sea-floor character and sedimentary processes of Block Island Sound, offshore Rhode Island

Gridded multibeam bathymetry covers approximately 634 square kilometers of sea floor in Block Island Sound. Although originally collected for charting purposes during National Oceanic and Atmospheric Administration hydrographic surveys H12009, H12010, H12011, H12015, H12033, H12137, and H12139, these combined acoustic data and the sea-floor sediment sampling and photography stations subsequently occupied to verify them during U.S. Geological Survey cruise 2011-006-FA (1) show the composition and terrain of the seabed, (2) provide information on sediment transport and benthic habitat, and (3) are part of an expanding series of studies that provide a fundamental framework for research and management activities (for example, wind farms and fisheries) along the Rhode Island inner continental shelf.

Rhode Island↗

USGS2011

Surficial geology of the sea floor in Long Island Sound offshore of Orient Point, New York

The U.S. Geological Survey (USGS), the National Oceanic and Atmospheric Administration (NOAA), and the Connecticut Department of Environmental Protection (CT DEP) are working cooperatively to map and interpret features of the sea floor along the northeastern coast of the United States. This report presents multibeam bathymetry and sidescan-sonar data obtained during NOAA survey H11446, which was conducted in a 12-km2 area in Long Island Sound offshore of Orient Point, NY. In addition, sediment and photographic data from 26 stations obtained during a USGS verification cruise are presented. Overall, the sea floor slopes gently seaward, but topography is more complex in sand-wave and boulder areas, which are evident in the multibeam and sidescan-sonar data from the study area. Sand waves generally have north-south-oriented crests with 10- to 20-m wavelengths. Sand-wave asymmetry indicates eastward net sediment transport in the east and westward net sediment transport in the northern and western parts of the study area. Areas with boulders on the sea floor are typically hummocky and are part of a glacial moraine system. Boulders are typically encrusted with seaweed, sponges, and anemones as shown in the bottom photography.

Open-File Report↗

USGS2011

Sea-floor geology and topography offshore in Eastern Long Island Sound

A gridded multibeam bathymetric dataset covers approximately 133.7 square kilometers of sea floor offshore in eastern Long Island Sound. Although originally collected for charting purposes during National Oceanic and Atmospheric Administration hydrographic survey H11997, these acoustic data, and the sea-floor sampling and photography stations subsequently occupied to verify them during USGS cruise 2010-015-FA, are part of an expanding series of studies that provide a fundamental framework for research and resource management (for example, cables, pipelines, and dredging) activities in this major East Coast estuary. Results show the composition and terrain of the seabed and provide information on sediment transport and benthic habitat. Bedrock outcrops, erosional outliers, lag deposits of boulders, scour depressions, and extensive gravel pavements are common in the eastern part of the study area. These features, which result from the near-constant exposure to strong tidal currents, indicate sedimentary environments dominated by processes associated with erosion. Large fields of transverse and barchanoid sand waves in the western part of the study area reflect slightly lower energy levels and sedimentary environments where processes associated with coarse bedload transport prevail.

Open-File Report↗

USGS2011

Combined multibeam and LIDAR bathymetry data from eastern Long Island Sound and westernmost Block Island Sound-A regional perspective

Detailed bathymetric maps of the sea floor in Long Island Sound are of great interest to the Connecticut and New York research and management communities because of this estuary's ecological, recreational, and commercial importance. The completed, geologically interpreted digital terrain models (DTMs), ranging in area from 12 to 293 square kilometers, provide important benthic environmental information, yet many applications require a geographically broader perspective. For example, individual surveys are of limited use for the planning and construction of cross-sound infrastructure, such as cables and pipelines, or for the testing of regional circulation models. To address this need, we integrated 12 multibeam and 2 LIDAR (Light Detection and Ranging) contiguous bathymetric DTMs, produced by the National Oceanic and Atmospheric Administration during charting operations, into one dataset that covers much of eastern Long Island Sound and extends into westernmost Block Island Sound. The new dataset is adjusted to mean lower low water, is gridded to 4-meter resolution, and is provided in UTM Zone 18 NAD83 and geographic WGS84 projections. This resolution is adequate for sea floor-feature and process interpretation but is small enough to be queried and manipulated with standard Geographic Information System programs and to allow for future growth. Natural features visible in the grid include exposed bedrock outcrops, boulder lag deposits of submerged moraines, sand-wave fields, and scour depressions that reflect the strength of the oscillating and asymmetric tidal currents. Bedform asymmetry allows interpretations of net sediment transport. Anthropogenic artifacts visible in the bathymetric data include a dredged channel, shipwrecks, dredge spoils, mooring anchors, prop-scour depressions, buried cables, and bridge footings. Together the merged data reveal a larger, more continuous perspective of bathymetric topography than previously available, providing a fundamental framework for research and resource management activities in this major east-coast estuary.

Open-File Report↗

USGS2011

Sea-Floor geology and character of Eastern Rhode Island Sound West of Gay Head, Massachusetts

Gridded multibeam bathymetry covers approximately 102 square kilometers of sea floor in eastern Rhode Island Sound west of Gay Head, Massachusetts. Although originally collected for charting purposes during National Oceanic and Atmospheric Administration hydrographic survey H11922, these acoustic data and the sea-floor stations subsequently occupied to verify them (1) show the composition and terrain of the seabed, (2) provide information on sediment transport and benthic habitat, and (3) are part of an expanding series of studies that provide a fundamental framework for research and management activities (for example, windfarms and fisheries) along the Massachusetts inner continental shelf. Most of the sea floor in the study area has an undulating to faintly rippled appearance and is composed of bioturbated muddy sand, reflecting processes associated with sediment sorting and reworking. Shallower areas are composed of rippled sand and, where small fields of megaripples are present, indicate sedimentary environments characterized by processes associated with coarse bedload transport. Boulders and gravel were found on the floors of scour depressions and on top of an isolated bathymetric high where erosion has removed the Holocene marine sediments and exposed the underlying relict lag deposits of Pleistocene drift. The numerous scour depressions, which formed during storm-driven events, result in the juxtaposition of sea-floor areas with contrasting sedimentary environments and distinct gravel, sand, and muddy sand textures. This textural heterogeneity in turn creates a complex patchwork of habitats. Our observations of local variations in community structure suggest that this small-scale textural heterogeneity adds dramatically to the sound-wide benthic biological diversity.

Eastern Rhode Island Sound;West Of Gay Head;Massac↗

USGS2011

Surficial geology of the sea floor in Central Rhode Island Sound Southeast of Point Judith, Rhode Island

The U.S. Geological Survey (USGS) and the National Oceanic and Atmospheric Administration (NOAA) are working together to study sea-floor environments off the northeast coast of the United States. During 2008, NOAA survey H11996 collected multibeam echosounder data in a 65-square kilometer area in central Rhode Island Sound, southeast of Point Judith, Rhode Island. During 2010, the USGS collected bottom photographs and sediment samples from 25 stations in this study area. The bathymetry, photography, and sediment data are used to interpret sea-floor features including scour depressions, sand waves, trawl marks, and dredge spoils. Scour depressions cover the bathymetric highs in much of the study area. Sand waves are located mostly in the southwest, and trawl marks tend to be in the northern regions. Dredge spoils are located at a disposal site in a bathymetric low in the western end of the study area. Most stations have a sea-floor surface of sand or silty sand, but eight of the stations have boulders to pea-sized gravel or gravelly sediment on the surface. Photographs show sandy areas typically have scattered burrows, shells, amphipod communities, and worm tubes. Boulders and cobbles are commonly overgrown with hydrozoans and anemones.

Central Rhode Island Sound;Southeast Of Point Judi↗

USGS2010

Geological Interpretation of the Sea Floor Offshore of Edgartown, Massachusetts

Gridded bathymetry and sidescan-sonar imagery together cover approximately 37.3 square kilometers of sea floor in the vicinity of Edgartown Harbor, Massachusetts. Although originally collected for charting purposes during National Oceanic and Atmospheric Administration hydrographic survey H11346, these acoustic data, and the sea-floor stations and seismic-reflection lines subsequently occupied to verify them, 1) show the composition and terrain of the seabed, 2) provide information on sediment transport and benthic habitat, and 3) are part of an expanding series of studies that provide a fundamental framework for research and management (for example, windfarms, pipelines, and dredging) activities along the Massachusetts inner continental shelf.

Open-File Report↗

USGS2010

Integrated Multibeam and LIDAR Bathymetry Data Offshore of New London and Niantic, Connecticut

Nearshore areas within Long Island Sound are of great interest to the Connecticut and New York research and resource management communities because of their ecological, recreational, and commercial importance. Although advances in multibeam echosounder technology permit the construction of high-resolution representations of sea-floor topography in deeper waters, limitations inherent in collecting fixed-angle multibeam data make using this technology in shallower waters (less than 10 meters deep) difficult and expensive. These limitations have often resulted in data gaps between areas for which multibeam bathymetric datasets are available and the adjacent shoreline. To address this problem, the geospatial data sets released in this report seamlessly integrate complete-coverage multibeam bathymetric data acquired off New London and Niantic Bay, Connecticut, with hydrographic Light Detection and Ranging (LIDAR) data acquired along the nearshore. The result is a more continuous sea floor representation and a much smaller gap between the digital bathymetric data and the shoreline than previously available. These data sets are provided online and on CD-ROM in Environmental Systems Research Institute (ESRI) raster-grid and GeoTIFF formats in order to facilitate access, compatibility, and utility.

Open-File Report↗

USGS2010

Surficial geology of the sea floor in Long Island Sound offshore of Plum Island, New York

The U.S. Geological Survey (USGS), the Connecticut Department of Environmental Protection, and the National Oceanic and Atmospheric Administration (NOAA) have been working cooperatively to interpret surficial sea-floor geology along the coast of the Northeastern United States. NOAA survey H11445 in eastern Long Island Sound, offshore of Plum Island, New York, covers an area of about 12 square kilometers. Multibeam bathymetry and sidescan-sonar imagery from the survey, as well as sediment and photographic data from 13 stations occupied during a USGS verification cruise are used to delineate sea-floor features and characterize the environment. Bathymetry gradually deepens offshore to over 100 meters in a depression in the northwest part of the study area and reaches 60 meters in Plum Gut, a channel between Plum Island and Orient Point. Sand waves are present on a shoal north of Plum Island and in several smaller areas around the basin. Sand-wave asymmetry indicates that counter-clockwise net sediment transport maintains the shoal. Sand is prevalent where there is low backscatter in the sidescan-sonar imagery. Gravel and boulder areas are submerged lag deposits produced from the Harbor Hill-Orient Point-Fishers Island moraine segment and are found adjacent to the shorelines and just north of Plum Island, where high backscatter is present in the sidescan-sonar imagery.

Open-File Report↗

USGS2010

Sea-floor geology and character offshore of Rocky Point, New York

Open-File Report↗

USGS2009

Sidescan-Sonar Imagery and Surficial Geologic Interpretations of the Sea Floor in Western Rhode Island Sound

The U.S. Geological Survey (USGS) and National Oceanic and Atmospheric Administration (NOAA) have been working together to interpret sea-floor geology along the northeastern coast of the United States. In 2004, the NOAA Ship RUDE completed survey H11322, a sidescan-sonar and bathymetric survey that covers about 60 square kilometers of the sea floor in western Rhode Island Sound. This report interprets sidescan-sonar and bathymetric data from NOAA survey H11322 to delineate sea-floor features and sedimentary environments in the study area. Paleozoic bedrock and Cretaceous Coastal Plain sediments in Rhode Island Sound underlie Pleistocene glacial drift that affects the distribution of surficial Holocene marine and transgressional sediments. The study area has three bathymetric highs separated by a channel system. Features and patterns in the sidescan-sonar imagery include low, moderate, and high backscatter; sand waves; scarps; erosional outliers; boulders; trawl marks; and dredge spoils. Four sedimentary environments in the study area, based on backscatter and bathymetric features, include those characterized by erosion or nondeposition, coarse-grained bedload transport, sorting and reworking, and deposition. Environments characterized by erosion or nondeposition and coarse-grained bedload transport are located in shallower areas and environments characterized by deposition are located in deeper areas; environments characterized by sorting and reworking processes are generally located at moderate depths.

Open-File Report↗

USGS2009

Digital seismic-reflection data from western Rhode Island Sound, 1980

During 1980, the U.S. Geological Survey (USGS) conducted a seismic-reflection survey in western Rhode Island Sound aboard the Research Vessel Neecho. Data from this survey were recorded in analog form and archived at the USGS Woods Hole Science Center's Data Library. Due to recent interest in the geology of Rhode Island Sound and in an effort to make the data more readily accessible while preserving the original paper records, the seismic data from this cruise were scanned and converted to Tagged Image File Format (TIFF) images and SEG-Y data files. Navigation data were converted from U.S. Coast Guard Long Range Aids to Navigation (LORAN-C) time delays to latitudes and longitudes, which are available in Environmental Systems Research Institute, Inc. (ESRI) shapefile format and as eastings and northings in space-delimited text format.

Rhode Island↗

USGS2009

Digital Seismic-Reflection Data from Eastern Rhode Island Sound and Vicinity, 1975-1980

During 1975 and 1980, the U.S. Geological Survey (USGS) conducted two seismic-reflection surveys in Rhode Island Sound (RIS) aboard the research vessel Asterias: cruise ASTR75-June surveyed eastern RIS in 1975 and cruise AST-80-6B surveyed southern RIS in 1980. Data from these surveys were recorded in analog form and archived at the USGS Woods Hole Coastal and Marine Science Center's Data Library. In response to recent interest in the geology of RIS and in an effort to make the data more readily accessible while preserving the original paper records, the seismic data from these cruises were scanned and converted to black and white Tagged Image File Format and grayscale Portable Network Graphics images and SEG-Y data files. Navigation data were converted from U.S. Coast Guard Long Range Aids to Navigation time delays to latitudes and longitudes that are available in Environmental Systems Research Institute, Inc., shapefile format and as eastings and northings in space-delimited text format. This report complements two others that contain analog seismic-reflection data from RIS (McMullen and others, 2009) and Long Island and Block Island Sounds (Poppe and others, 2002) and were converted into digital form.

Open-File Report↗