Geology topics

Jeffrey T. Morisette

Publications and source records attributed to Jeffrey T. Morisette.

28 records · Page 2Linked to original sources

USGS2015

Caveats for correlative species distribution modeling

Correlative species distribution models are becoming commonplace in the scientific literature and public outreach products, displaying locations, abundance, or suitable environmental conditions for harmful invasive species, threatened and endangered species, or species of special concern. Accurate species distribution models are useful for efficient and adaptive management and conservation, research, and ecological forecasting. Yet, these models are often presented without fully examining or explaining the caveats for their proper use and interpretation and are often implemented without understanding the limitations and assumptions of the model being used. We describe common pitfalls, assumptions, and caveats of correlative species distribution models to help novice users and end users better interpret these models. Four primary caveats corresponding to different phases of the modeling process, each with supporting documentation and examples, include: (1) all sampling data are incomplete and potentially biased; (2) predictor variables must capture distribution constraints; (3) no single model works best for all species, in all areas, at all spatial scales, and over time; and (4) the results of species distribution models should be treated like a hypothesis to be tested and validated with additional sampling and modeling in an iterative process.

Ecological Informatics↗

USGS2015

Combining state-and-transition simulations and species distribution models to anticipate the effects of climate change

State-and-transition simulation models (STSMs) are known for their ability to explore the combined effects of multiple disturbances, ecological dynamics, and management actions on vegetation. However, integrating the additional impacts of climate change into STSMs remains a challenge. We address this challenge by combining an STSM with species distribution modeling (SDM). SDMs estimate the probability of occurrence of a given species based on observed presence and absence locations as well as environmental and climatic covariates. Thus, in order to account for changes in habitat suitability due to climate change, we used SDM to generate continuous surfaces of species occurrence probabilities. These data were imported into ST-Sim, an STSM platform, where they dictated the probability of each cell transitioning between alternate potential vegetation types at each time step. The STSM was parameterized to capture additional processes of vegetation growth and disturbance that are relevant to a keystone species in the Greater Yellowstone Ecosystem—whitebark pine ( Pinus albicaulis ). We compared historical model runs against historical observations of whitebark pine and a key disturbance agent (mountain pine beetle, Dendroctonus ponderosae ), and then projected the simulation into the future. Using this combination of correlative and stochastic simulation models, we were able to reproduce historical observations and identify key data gaps. Results indicated that SDMs and STSMs are complementary tools, and combining them is an effective way to account for the anticipated impacts of climate change, biotic interactions, and disturbances, while also allowing for the exploration of management options.

AIMS Environmental Science↗

USGS2014

Ten ways remote sensing can contribute to conservation

In an effort to increase conservation effectiveness through the use of Earth observation technologies, a group of remote sensing scientists affiliated with government and academic institutions and conservation organizations identified 10 questions in conservation for which the potential to be answered would be greatly increased by use of remotely sensed data and analyses of those data. Our goals were to increase conservation practitioners’ use of remote sensing to support their work, increase collaboration between the conservation science and remote sensing communities, identify and develop new and innovative uses of remote sensing for advancing conservation science, provide guidance to space agencies on how future satellite missions can support conservation science, and generate support from the public and private sector in the use of remote sensing data to address the 10 conservation questions. We identified a broad initial list of questions on the basis of an email chain-referral survey. We then used a workshop-based iterative and collaborative approach to whittle the list down to these final questions (which represent 10 major themes in conservation): How can global Earth observation data be used to model species distributions and abundances? How can remote sensing improve the understanding of animal movements? How can remotely sensed ecosystem variables be used to understand, monitor, and predict ecosystem response and resilience to multiple stressors? How can remote sensing be used to monitor the effects of climate on ecosystems? How can near real-time ecosystem monitoring catalyze threat reduction, governance and regulation compliance, and resource management decisions? How can remote sensing inform configuration of protected area networks at spatial extents relevant to populations of target species and ecosystem services? How can remote sensing-derived products be used to value and monitor changes in ecosystem services? How can remote sensing be used to monitor and evaluate the effectiveness of conservation efforts? How does the expansion and intensification of agriculture and aquaculture alter ecosystems and the services they provide? How can remote sensing be used to determine the degree to which ecosystems are being disturbed or degraded and the effects of these changes on species and ecosystem functions?

Conservation Biology↗

USGS2014

A cross comparison of spatiotemporally enhanced springtime phenological measurements from satellites and ground in a northern U.S. mixed forest

Cross comparison of satellite-derived land surface phenology (LSP) and ground measurements is useful to ensure the relevance of detected seasonal vegetation change to the underlying biophysical processes. While standard 16-day and 250-m Moderate Resolution Imaging Spectroradiometer (MODIS) vegetation index (VI)-based springtime LSP has been evaluated in previous studies, it remains unclear whether LSP with enhanced temporal and spatial resolutions can capture additional details of ground phenology. In this paper, we compared LSP derived from 500-m daily MODIS and 30-m MODIS-Landsat fused VI data with landscape phenology (LP) in a northern U.S. mixed forest. LP was previously developed from intensively observed deciduous and coniferous tree phenology using an upscaling approach. Results showed that daily MODIS-based LSP consistently estimated greenup onset dates at the study area (625 m × 625 m) level with 4.48 days of mean absolute error (MAE), slightly better than that of using 16-day standard VI (4.63 days MAE). For the observed study areas, the time series with increased number of observations confirmed that post-bud burst deciduous tree phenology contributes the most to vegetation reflectance change. Moreover, fused VI time series demonstrated closer correspondences with LP at the community level (0.1-20 ha) than using MODIS alone at the study area level (390 ha). The fused LSP captured greenup onset dates for respective forest communities of varied sizes and compositions with four days of the overall MAE. This study supports further use of spatiotemporally enhanced LSP for more precise phenological monitoring.

Wisconsin↗

USGS2013

Land surface phenology

Certain vegetation types (e.g., deciduous shrubs, deciduous trees, grasslands) have distinct life cycles marked by the growth and senescence of leaves and periods of enhanced photosynthetic activity. Where these types exist, recurring changes in foliage alter the reflectance of electromagnetic radiation from the land surface, which can be measured using remote sensors. The timing of these recurring changes in reflectance is called land surface phenology (LSP). During recent decades, a variety of methods have been used to derive LSP metrics from time series of reflectance measurements acquired by satellite-borne sensors. In contrast to conventional phenology observations, LSP metrics represent the timing of reflectance changes that are driven by the aggregate activity of vegetation within the areal unit measured by the satellite sensor and do not directly provide information about the phenology of individual plants, species, or their phenophases. Despite the generalized nature of satellite sensor-derived measurements, they have proven useful for studying changes in LSP associated with various phenomena. This chapter provides a detailed overview of the use of satellite remote sensing to monitor LSP. First, the theoretical basis for the application of satellite remote sensing to the study of vegetation phenology is presented. After establishing a theoretical foundation for LSP, methods of deriving and validating LSP metrics are discussed. This chapter concludes with a discussion of major research findings and current and future research directions.

Book chapter↗

USGS2013

VisTrails SAHM: visualization and workflow management for species habitat modeling

The Software for Assisted Habitat Modeling (SAHM) has been created to both expedite habitat modeling and help maintain a record of the various input data, pre- and post-processing steps and modeling options incorporated in the construction of a species distribution model through the established workflow management and visualization VisTrails software. This paper provides an overview of the VisTrails:SAHM software including a link to the open source code, a table detailing the current SAHM modules, and a simple example modeling an invasive weed species in Rocky Mountain National Park, USA.

Ecography: Pattern and Diversity in Ecology↗

USGS2013

Data management challenges in species distribution modeling

An important component in the fields of ecology and conservation biology is understanding the environmental conditions and geographic areas that are suitable for a given species to inhabit. A common tool in determining such areas is species distribution modeling which uses computer algorithms to determine the spatial distribution of organisms. Most commonly the correlative relationships between the organism and environmental variables are the primary consideration. The data requirements for this type of modeling consist of known presence and possibly absence locations of the species as well as the values of environmental or climatic covariates thought to define the species habitat suitability at these locations. These covariate data are generally extracted from remotely sensed imagery, interpolated/gridded historical climate data, or downscaled climate model output. Traditionally, ecologists and biologists have constructed species distribution models using workflows and data that reside primarily on their local workstations or networks. This workflow is becoming challenging as scientists increasingly try to use these modeling techniques to inform management decisions under different climate change scenarios. This challenge stems from the fact that remote sensing products, gridded historical climate, and downscaled climate models are not only increasing in spatial and temporal resolution but proliferating as well. Any rigorous assessment of uncertainty requires a computationally intensive sensitivity analysis accounting for various sources of uncertainty. The scientists fitting these models generally do not have the background in computer science required to take advantage of recent advances in web-service based data acquisition, remote high-powered data processing, or scientific workflow systems. Ecologists in the field of modeling are in need of a tractable platform that abstracts the inherent computational complexity required to incorporate the burgeoning field of coupled climate and ecological response modeling. In this paper we describe the computational challenges in species distribution modeling and solutions using scientific workflow systems. We focus on the Software for Assisted Species Modeling (SAHM) a package within VisTrails, an open-source scientific workflow system.

Bulletin of the Technical Committee on Data Engine↗

USGS2012

North Central Climate Science Center--science agenda 2012-2017

The information presented here provides the five-year science agenda for the North Central Climate Science Center. It is meant to be a high-level guide that describes the spatial context of the center, the primary partners and stakeholders, and the strategic framework the center will use in applying climate science to inform management.

Open-File Report↗

USGS2011

Applying remote sensing to invasive species science—A tamarisk example

The Invasive Species Science Branch of the Fort Collins Science Center provides research and technical assistance relating to management concerns for invasive species, including understanding how these species are introduced, identifying areas vulnerable to invasion, forecasting invasions, and developing control methods. This fact sheet considers the invasive plant species tamarisk (Tamarix spp), addressing three fundamental questions: *Where is it now? *What are the potential or realized ecological impacts of invasion? *Where can it survive and thrive if introduced? It provides peer-review examples of how the U.S. Geological Survey, working with other federal agencies and university partners, are applying remote-sensing technologies to address these key questions.

Fact Sheet↗

USGS2011

Improving national-scale invasion maps: Tamarisk in the western United States

New invasions, better field data, and novel spatial-modeling techniques often drive the need to revisit previous maps and models of invasive species. Such is the case with the at least 10 species of Tamarix , which are invading riparian systems in the western United States and expanding their range throughout North America. In 2006, we developed a National Tamarisk Map by using a compilation of presence and absence locations with remotely sensed data and statistical modeling techniques. Since the publication of that work, our database of Tamarix distributions has grown significantly. Using the updated database of species occurrence, new predictor variables, and the maximum entropy (Maxent) model, we have revised our potential Tamarix distribution map for the western United States. Distance-to-water was the strongest predictor in the model (58.1%), while mean temperature of the warmest quarter was the second best predictor (18.4%). Model validation, averaged from 25 model iterations, indicated that our analysis had strong predictive performance (AUC = 0.93) and that the extent of Tamarix distributions is much greater than previously thought. The southwestern United States had the greatest suitable habitat, and this result differed from the 2006 model. Our work highlights the utility of iterative modeling for invasive species habitat modeling as new information becomes available.

Western United States↗