USGS Science⌕ Search

Geology topics

H. A. Tourtelot

Publications and source records attributed to H. A. Tourtelot.

12 recordsLinked to original sources
USGS2024

Black shale - Its deposition and diagenesis.

Black shale is a dark-colored mudrock containing organic matter that may have generated hydrocarbons in the subsurface or that may yield hydrocarbons by pyrolysis. Many black shale units are enriched in metals severalfold above expected amounts in ordinary shale. Some black shale units have served as host rocks for syngenetic metal deposits. Black shales have formed throughout the Earth's history and in all parts of the world. This suggests that geologic processes and not geologic settings are the controlling factors in the accumulation of black shale. Geologic processes are those of deposition by which the raw materials of black shale are accumulated and those of diagenesis in response to increasing depth of burial. Depositional processes involve a range of relationships among such factors as organic productivity, clastic sedimentation rate, and the intensity of oxidation by which organic matter is destroyed. If enough organic material is present to exhaust the oxygen in the environment, black shale results. Diagenetic processes involve chemical reactions controlled by the nature of the components and by the pressure and temperature regimens that continuing burial imposes. For a thickness of a few meters beneath the surface, sulfate is reduced and sulfide minerals may be deposited. Fermentation reactions in the next several hundred meters result in biogenic methane, followed successively at greater depths by decarboxylation reactions and thermal maturation that form additional hydrocarbons. Suites of newly formed minerals are characteristic for each of the zones of diagenesis.

Clays and Clay Minerals↗
USGS1980

Composition and properties of the Pierre Shale and equivalent rocks, northern Great Plains region

The Pierre Shale and equivalent rocks of Late Cretaceous age consist in the east-central Dakotas of several hundred feet of offshore-marine shale and minor marl; in west-central Montana near the sediment source the equivalents of the Pierre Shale consist of several thousand feet of volcanic-rich and mostly nonmarine sediments; and in the area between, both types of rock are separated by tongues of nearshore-marine siltstone and sandstone that mark three major transgressions of the sea across the area. The major-, minor-, and trace-element composition was determined for 226 samples of these rocks, and the mineralogical composition was determined for 1,350 samples. Slurry pH, Atterberg limits, and grain and bulk densities were determined on some samples. The arithmetic mean, in percent, and standard deviation (in parentheses) of major and minor elements, mostly in shale and siltstone and excluding the 23 chemically analyzed bentonite samples, are as follows: SiO2 60.8 (7.9) Al2O3 14.4 (2.5) Fe2O3 3.4 (1.4) FeO 1.1 (1.2) MgO 2.2 (1.0) CaO 2.7 (0.48) Na2O 1.1 (0.56) K2O 2.4 (0.57) H2O- 3.2 (1.3) H2O+ 4.3 (1.2) TiO2 0.58 (0.12) P2O5 0.14 (0.073) S 0.37 (1.1) F 0.71 (0.15) Cl 0.16 (0.024) CO2 2.1 (7.0) C, organic 0.94 (1.8) The mean and standard deviation of minerals as determined by X-ray methods, excluding bentonite samples, is as follows: clay minerals, 53 (20); quartz, 24 (13); cristobalite, 1 (5); potassium-feldspar, 1 (2); plagioclase, 6 (7); anorthite content from 20 to 40 percent; calcite, 5 (14); dolomite, 4 (7); organic matter, 1 (2); and sparsely scattered gypsum, jarosite, pyrite, zeolites, augite, siderite, and probably minor amounts of hydrated iron-manganese (Fe-Mn) oxides. The mean and standard deviation of the clay-mineral fraction is as follows: mixed-layer illite-smectite, 70 (20); illite, 16 (9); chlorite, 3 (6); and kaolinite, 9 (13). The mixed-layer clay, except in the Montana disturbed belt, is a random interlayering of 20 to 60 percent illite-type layers, about 35 percent beidelite-type layers, and the remainder montmorillonite-type layers; chlorite or vermiculite layers are rare. Most bentonite differs from shale in its small quartz content, rarely more than a few percent, in the more calcic composition and hightemperature thermal state of its plagioclase, and in its rare kaolinite, near absence of chlorite, and lack of illite-either free or mixed layered with smectite. Bentonite commonly consists of more than 90 percent smectite in which montmorillonite is interlayered with a smaller amount of beidellite. The clay-mineral composition of marine rock, including proportions of layers in the dominant illite-smectite, averages about the same as in the nonmarine rock, though in the latter the composition is more variable. The average content of major chemical constituents also is closely similar, partly because the large clay content of fine-grained offshore-marine shale is balanced by the small clay content of nearshore-marine siltstone and sandstone. In addition, the alumina and alkalic elements in an average of 10 percent more clay in marine rock are partly balanced by these constituents in the 5 percent more feldspar in nonmarine rock. Much of the observed regional and stratigraphic variation in maj or constituents is the result of the three major east-west migrations of the depositional sites of nearshore-marine sandstone and siltstone. Dolomite is found almost exclusively in relatively coarse-grained rock, particularly in nearshore-marine siltstone where diagenetic dolomite is expected, but it is found almost as frequently in nonmarine siltstone. Amounts of minor constituents are nearly equal in marine and nonmarine rocks, except that pyrite and consequently sulfur are relatively sparse in nonmarine rock. Average amounts of organic matter found in marine and nonmarine rocks are nearly identical. However, organic matter in nonmarine rock occurs almost entirely in volumetric

North Dakota, South Dakota, Montana↗
USGS1979

Geochemical surveys in the United States in relation to health.

Geochemical surveys in relation to health may be classified as having one, two or three dimensions. One-dimensional surveys examine relations between concentrations of elements such as Pb in soils and other media and burdens of the same elements in humans, at a given time. The spatial distributions of element concentrations are not investigated. The primary objective of two-dimensional surveys is to map the distributions of element concentrations, commonly according to stratified random sampling designs based on either conceptual landscape units or artificial sampling strata, but systematic sampling intervals have also been used. Political units have defined sample areas that coincide with the units used to accumulate epidemiological data. Element concentrations affected by point sources have also been mapped. Background values, location of natural or technological anomalies and the geographic scale of variation for several elements often are determined. Three-dimensional surveys result when two-dimensional surveys are repeated to detect environmental changes. -Author

Philosophical Transactions of the Royal Society B:↗
USGS1970

Isotopic composition of strontium in sea water throughout Phanerozoic time

Isotopic analyses of strontium in primary fossil carbonate reveal significant variations in Sr 87 Sr 86 "> Sr87Sr86 of sea water during the Phanerozoic. The strontium isotopic composition may have been uniform from the Ordovician through the Mississippian, with an average Sr 87 Sr 86 "> Sr87Sr86 of 0.7078. A subsequent decrease in this value into the Mesozoic is interrupted by two provisionally documented positive pulses in Sr 87 Sr 86 "> Sr87Sr86 —one in the Early Pennsylvanian and one in the Early Triassic. The lowest observed value (0.7068) occurred in Late Jurassic time, and this was followed by a gradual increase to 0.7075 in the Late Cretaceous and a more rapid increase through the Tertiary to 0.7090 for modern sea water. These variations are thought to be the result of a complex interplay of periods of intense volcanism and epeirogenic movements of the continents on a worldwide scale.

Geochimica et Cosmochimica Acta↗
USGS1969

Distribution of oxygen and carbon isotopes in fossils of late cretaceous age, western interior region of North America

The oxygen isotope composition of both calcite and aragonite of the pelecypod Inoceramus is lighter than the composition of the aragonite of associated baculites and other cephalopods from the western interior region, the Gulf and Atlantic Coastal Plains, parts of Canada, and West Greenland. This difference cannot be explained by biotic and oceanographic factors or by postdepositional alteration of original isotopic compositions. Metabolic fractionation of oxygen isotopes by Inoceramus is strongly implied by the data and is not contradicted by what is known of the processes involved in the biologic deposition of shell carbonate. In addition, the oxygen isotope compositions of the inocerams and of some baculites are so light as to indicate temperatures greater than 30° C, which is too high for mollusks to tolerate. The unreasonable range of the indicated temperatures seems to be partly the result of metabolic fractionation of oxygen and partly the result of the Late Cretaceous sea in the western interior region having had a light oxygen isotope composition because of dilution with fresh water. The carbon isotope composition of the aragonite from Inoceramus is consistently heavier than that of the calcite in the same specimen by amounts ranging from 1 to 3 per mil. Metabolic fractionation of carbon isotopes within Inoceramus thus is indicated. The carbon isotope composition of the aragonite from baculites and other cephalopods is consistently lighter than that in either the aragonite or calcite in Inoceramus, indicating either that the cephalopods fractionated carbon isotopes from the dissolved carbonate in sea water differently than did inocerams or that the cephalopods utilized carbon of a different isotopic composition, probably from their food source, for their metabolic processes. While oxygen isotope data from the inocerams are not useful for paleotemperature interpretations, the oxygen isotope data from the baculites, if taken at face value, suggest either warmer temperatures for the western interior sea than around the periphery of Cretaceous North America, or water of oxygen isotope composition lighter than world oceans, or both. Data from British Columbia, southeastern Alaska, and West Greenland to the Gulf Coastal Plain do not indicate a well-developed latitudinal distribution of temperature in Late Cretaceous time. A general decline in temperatures during late Campanian and early Maestrichtian time is not evident. © 1969, The Geological Society of America, Inc.

Geological Society of America Bulletin↗
USGS1964

Minor-element composition and organic carbon content of marine and nonmarine shales of Late Cretaceous age in the western interior of the United States

The composition of nonmarine shales of Cretaceous age that contain less than 1 per cent organic carbon is assumed to represent the inherited minor-element composition of clayey sediments delivered to the Cretaceous sea that occupied the western interior region of North America. Differences in minor-element content between these samples and samples of 1. (a) nonmarine carbonaceous shales (1 to 17 per cent organic carbon), 2. (b) nearshore marine shales (less than 1 per cent organic carbon), and 3. (c) offshore marine shales (as much as 8 per cent organic carbon), all of the same age, reveal certain aspects of the role played by clay minerals and organic materials in affecting the minor-element composition of the rocks. The organic carbon in the nonmarine rocks occurs in disseminated coaly plant remains. The organic carbon in the marine rocks occurs predominantly in humic material derived from terrestrial plants. The close similarity in composition between the organic isolates from the marine samples and low-rank coal suggests that the amount of marine organic material in these rocks is small. The minor-element content of the two kinds of nonmarine shales is the same despite the relatively large amount of organic carbon in the carbonaceous shales. The nearshore marine shales, however, contain larger median amounts of arsenic, boron, chromium, vanadium and zinc than do the nonmarine rocks; and the offshore marine shales contain even larger amounts of these elements. Cobalt, molybdenum, lead and zirconium show insignificant differences in median content between the nonmarine and marine rocks, although as much as 25 ppm molybdenum is present in some offshore marine samples. The gallium content is lower in the marine than in the nonmarine samples. Copper and selenium contents of the two kinds of nonmarine rocks and the nearshore marine samples are the same, but those of the offshore samples are larger. In general, arsenic, chromium, copper, molybdenum, selenium, vanadium and zinc are concentrated in those offshore marine samples having the largest amounts of organic carbon, but samples with equal amounts of vanadium, for instance, may differ by a factor of 3 in their amount of organic carbon. Arsenic and molybdenum occur in some samples chiefly in syngenetic pyrite but also are present in relatively large amounts in samples that contain little pyrite. The data on nonmarine carbonaceous shales indicate that organic matter of terrestrial origin in marine shales contributes little to the minor-element content of such rocks. It is possible that marine organic matter, even though seemingly small in amount in marine shales, contributes to the minor-element composition of the shales. In addition to any such contribution, however, the great effectiveness in sorption processes of humic materials in conjunction with clay minerals suggests that such processes must have played an important role as these materials moved from the relatively dilute solutions of the nonmarine environment to the relatively concentrated solution of sea water. The volumes of sea water sufficient to supply for sorption the amounts of most minor elements in the offshore marine samples are insignificant compared to the volumes of water with which the clay and organic matter were in contact during their transportation and sedimentation. Consequently, the chemical characteristics of the environment in which the clay minerals and organic matter accumulated and underwent diagenesis probably were the most important factors in controlling the degree to which sorption processes and the formation of syngenetic minerals affected the final composition of the rocks.

Geochimica et Cosmochimica Acta↗