USGS Science⌕ Search

SEARCH · USGS Science

Results for “Water Surface Techniques”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS2007

Surface-Water Techniques: On Demand Training Opportunities

The U.S. Geological Survey (USGS) has been collecting streamflow information since 1889 using nationally consistent methods. The need for such information was envisioned by John Wesley Powell as a key component for settlement of the arid western United States. Because of Powell?s vision the nation now has a rich streamflow data base that can be analyzed with confidence in both space and time. This means that data collected at a stream gaging station in Maine in 1903 can be compared to data collected in 2007 at the same gage in Maine or at a different gage in California. Such comparisons are becoming increasingly important as we work to assess climate variability and anthropogenic effects on streamflow. Training employees in proper and consistent techniques to collect and analyze streamflow data forms a cornerstone for maintaining the integrity of this rich data base.

Fact Sheet↗
USGS1968

General procedure for gaging streams

This chapter briefly describes the objectives and procedures used in obtaining streamflow records. It is considered an introduction to other chapters on surface-water techniques which treat individual procedures in greater detail.

Techniques of Water-Resources Investigations↗
USGS1998

Comparison of two stable hydrogen isotope-ratio measurement techniques on Antarctic surface-water and ice samples

A comparison of the new hydrogen isotope-ratio technique of Vaughn et al. ([Vaughn, B.H., White, J.W.C., Delmotte, M., Trolier, M., Cattani, O., Stievenard, M., 1998. An automated system for hydrogen isotope analysis of water. Chem. Geol. (Isot. Geosci. Sect.), 152, 309-319]; the article immediately preceding this article) for the analysis of water samples utilizing automated on-line reduction by elemental uranium showed that 94% of 165 samples of Antarctic snow, ice, and stream water agreed with the ??2H values determined by H2-H2O platinum equilibration, exhibiting a bias of +0.5??? and a 2 - ?? variation of 1.9???. The isotopic results of 10 reduction technique samples, however, gave ??2H values that differed by 3.5??? or more, and were too negative by as much as 5.4??? and too positive by as much as 4.9??? with respect to those determined using the platinum equilibration technique.

Chemical Geology↗
USGS1996

Documentation of programs used to determine a wetlands hydroperiod from model-simulated water-surface elevations

A technique has been developed to determine a wetlands hydroperiod by comparing simulated water levels from a ground-water flow model and land- surface elevation data through a geographic information system. The simulated water levels are compared with the land-surface elevation data to determine the height of the water surface above or below land surface for the area of interest. Finally, the hydroperiod is determined for established time periods using criteria specified by the user. The program application requires the use of geographic information system software (ARC/INFO), including the TIN and GRID subsystems of the software. The application consists of an ANSI compatible C program to translate ground- water data output from the U.S. Geological Survey modular three-dimensional, finite-difference, ground-water flow model (MODFLOW) into a format that can be used as input for the geographic information system programs (AML's). The application uses ARC/INFO AML programs and ARC/INFO menu interface programs to create digital spatial data layers of the land surface and water surface and to determine the hydroperiod. The technique can be used to evaluate and manage wetlands hydrology.

Open-File Report↗
USGS2003

Application of Tracer-Injection Techniques to Demonstrate Surface-Water and Ground-Water Interactions Between an Alpine Stream and the North Star Mine, Upper Animas River Watershed, Southwestern Colorado

Tracer-injection studies were done in Belcher Gulch in the upper Animas River watershed, southwestern Colorado, to determine whether the alpine stream infiltrates into underground mine workings of the North Star Mine and other nearby mines in the area. The tracer-injection studies were designed to determine if and where along Belcher Gulch the stream infiltrates into the mine. Four separate tracer-injec-tion tests were done using lithium bromide (LiBr), optical brightener dye, and sodium chloride (NaCl) as tracer solu-tions. Two of the tracers (LiBr and dye) were injected con-tinuously for 24 hours, one of the NaCl tracers was injected continuously for 12 hours, and one of the NaCl tracers was injected over a period of 1 hour. Concentration increases of tracer constituents were detected in water discharging from the North Star Mine, substantiating a surface-water and ground-water connection between Belcher Gulch and the North Star Mine. Different timing and magnitude of tracer breakthroughs indicated multiple flow paths with different residence times from the stream to the mine. The Pittsburgh and Sultan Mines were thought to physically connect to the North Star Mine, but tracer breakthroughs were inconclusive in water from these mines. From the tracer-injection tests and synoptic measure-ments of streamflow discharge, a conceptual model was devel-oped for surface-water and ground-water interactions between Belcher Gulch and the North Star Mine. This information, combined with previous surface geophysical surveys indicat-ing the presence of subsurface voids, may assist with decision-making process for preventing infiltration and for the remedia-tion of mine drainage from these mines.

Water-Resources Investigations Report↗
USGS1965

Computer technique for slope-area measurements

The report gives detailed instructions on preparation of input data for automatic computation of a discharge measurement by the slope-area method. The program follows standardized methods of computing cross section properties and uses multi-section discharge equations. The printout comprises hydraulic properties of each section and computed discharges for each component sub-reach and for the entire reach. One example demonstrates the technique.

Surface Water Techniques↗
USGS1977

Uranium and coexisting element behaviour in surface waters and associated sediments with varied sampling techniques used for uranium exploration

Optimum sampling methods in surface water and associated sediments for use in uranium exploration are being studied at thirty sites in Colorado, New Mexico, Arizona and Utah. For water samples, filtering is recommended to increase sample homogeneity and reproducibility because for most elements studied water samples which were allowed to remain unfiltered until time of analysis contained higher concentrations than field-filtered samples of the same waters. Acidification of unfiltered samples resulted in still higher concentrations. This is predominantly because of leaching of the elements from the suspended fraction. U in water correlates directly with Ca, Mg, Na, K, Ba, B, Li and As. In stream sediments, U and other trace elements are concentrated in the finer size fractions. Accordingly, in prospecting, grain size fractions less than 90 μm (170 mesh) should be analyzed for U. A greater number of elements (21) show a significant positive correlation with U in stream sediments than in water. Results have revealed that anomalous concentrations of U found in water may not be detected in associated sediments and vice versa. Hence, sampling of both surface water and coexisting sediment is strongly recommended.

Journal of Geochemical Exploration↗
USGS2010

Levels at gaging stations

Operational procedures at U.S. Geological Survey gaging stations include periodic leveling checks to ensure that gages are accurately set to the established gage datum. Differential leveling techniques are used to determine elevations for reference marks, reference points, all gages, and the water surface. The techniques presented in this manual provide guidance on instruments and methods that ensure gaging-station levels are run to both a high precision and accuracy. Levels are run at gaging stations whenever differences in gage readings are unresolved, stations may have been damaged, or according to a pre-determined frequency. Engineer’s levels, both optical levels and electronic digital levels, are commonly used for gaging-station levels. Collimation tests should be run at least once a week for any week that levels are run, and the absolute value of the collimation error cannot exceed 0.003 foot/100 feet (ft). An acceptable set of gaging-station levels consists of a minimum of two foresights, each from a different instrument height, taken on at least two independent reference marks, all reference points, all gages, and the water surface. The initial instrument height is determined from another independent reference mark, known as the origin, or base reference mark. The absolute value of the closure error of a leveling circuit must be less than or equal to 0.003√n ft, where n is the total number of instrument setups, and may not exceed |0.015| ft regardless of the number of instrument setups. Closure error for a leveling circuit is distributed by instrument setup and adjusted elevations are determined. Side shots in a level circuit are assessed by examining the differences between the adjusted first and second elevations for each objective point in the circuit. The absolute value of these differences must be less than or equal to 0.005 ft. Final elevations for objective points are determined by averaging the valid adjusted first and second elevations. If final elevations indicate that the reference gage is off by |0.015| ft or more, it must be reset.

Techniques and Methods↗
USGS2008

Field Techniques for Estimating Water Fluxes Between Surface Water and Ground Water

This report focuses on measuring the flow of water across the interface between surface water and ground water, rather than the hydrogeological or geochemical processes that occur at or near this interface. The methods, however, that use hydrogeological and geochemical evidence to quantify water fluxes are described herein. This material is presented as a guide for those who have to examine the interaction of surface water and ground water. The intent here is that both the overview of the many available methods and the in-depth presentation of specific methods will enable the reader to choose those study approaches that will best meet the requirements of the environments and processes they are investigating, as well as to recognize the merits of using more than one approach. This report is designed to make the reader aware of the breadth of approaches available for the study of the exchange between surface and ground water. To accomplish this, the report is divided into four chapters. Chapter 1 describes many well-documented approaches for defining the flow between surface and ground waters. Subsequent chapters provide an in-depth presentation of particular methods. Chapter 2 focuses on three of the most commonly used methods to either calculate or directly measure flow of water between surface-water bodies and the ground-water domain: (1) measurement of water levels in well networks in combination with measurement of water level in nearby surface water to determine water-level gradients and flow; (2) use of portable piezometers (wells) or hydraulic potentiomanometers to measure hydraulic gradients; and (3) use of seepage meters to measure flow directly. Chapter 3 focuses on describing the techniques involved in conducting water-tracer tests using fluorescent dyes, a method commonly used in the hydrogeologic investigation and characterization of karst aquifers, and in the study of water fluxes in karst terranes. Chapter 4 focuses on heat as a tracer in hydrological investigations of the near-surface environment.

Techniques and Methods↗
USGS1965

Use of flumes in measuring discharge at gaging stations

This report discusses the general principles underlying the design of various types of flumes for measuring open-channel flow. Four flumes are described in detail, and the recommended discharge ratings for each are presented.

Water Surface Techniques↗
USGS1981

The U.S. Geological Survey Coal Hydrology Program and the potential of hydrologic models for impact assessments

A requirement of Public Law 95-87, the Surface Mining Control and Reclamation Act of 1977, is the understanding of the hydrology in actual and proposed surface-mined areas. Surface-water data for small specific-sites and for larger areas such as adjacent and general areas are needed also to satisfy the hydrologic requirements of the Act. The Act specifies that surface-water modeling techniques may be used to generate the data and information. The purpose of this report is to describe how this can be achieved for smaller watersheds. This report also characterizes 12 ' state-of-the-art ' strip-mining assessment models that are to be tested with data from two data-intensive studies involving small watersheds in Tennessee and Indiana. Watershed models are best applied to small watersheds with specific-site data. Extending the use of modeling techniques to larger watersheds remains relatively untested, and to date the upper limits for application have not been established. The U.S. Geological Survey is currently collecting regional hydrologic data in the major coal provinces of the United States and this data will be used to help satisfy the ' general-area ' data requirements of the Act. This program is reviewed and described in this report. (USGS)

Open-File Report↗
USGS2021

Two-dimensional hydraulic analyses of Joachim Creek, De Soto, Missouri

A two-dimensional hydraulic model; water-surface profiles; and digital maps of water-surface elevation, velocities, and water depths were developed for a 6.7-mile reach of Joachim Creek within and near the city of De Soto, Missouri. Water-surface profiles were generated for the 10-, 4-, 2-, 1-, and 0.2-percent annual exceedance probability (10-, 25-, 50-, 100-, and 500-year recurrence interval) flows. Digital maps of water-surface elevation, water depth, and velocity were generated for the 1- and 0.2-percent annual exceedance probability flows. Water-surface elevations and inundation extents of generated profiles and maps were substantially lower than similar products produced for the 2019 flood-insurance study that included the study reach. The differences in water-surface elevations can be attributed to differences in input streamflows and hydraulic simulation techniques. The water-surface elevations generated for the 1- and 0.2-percent annual exceedance probability flows were used to assess the vulnerability and inundation depths of 231 selected structures within the city of De Soto. Results indicate that 157 to 177 of the 231 structures were affected at the 1-percent annual exceedance probability flow, depending on the adjacent grade elevation used for reference. Between 185 and 198 structures were affected at the 0.2-percent annual exceedance probability flow, depending on grade elevation. Inundation depths at the affected structures were 0.02 to 9.28 feet (ft), depending on the flow and adjacent grade reference. Flood elevations were computed for Joachim Creek using a two-dimensional, finite-volume numerical modeling application for river hydraulics. The hydraulic model was calibrated using high-water marks from the April 18, 2013, flood and the maximum measured streamflow at the U.S. Geological Survey streamgage Joachim Creek at De Soto, Mo. (station 07019500), on September 8, 2018. The calibrated model was then used to compute the hydraulic conditions associated with the 10-, 4-, 2-, 1-, and 0.2-percent annual exceedance probability flows. The simulated water-surface elevations and digital elevation model (derived from light detection and ranging data having a 0.60-ft vertical accuracy and a 1.97-ft horizontal resolution) were used to generate products including water-surface profiles and maps of inundated area, water depth, and velocities using model postprocessing software.

Missouri↗
USGS2016

Multi-laboratory survey of qPCR enterococci analysis method performance in U.S. coastal and inland surface waters

Quantitative polymerase chain reaction (qPCR) has become a frequently used technique for quantifying enterococci in recreational surface waters, but there are several methodological options. Here we evaluated how three method permutations, type of mastermix, sample extract dilution and use of controls in results calculation, affect method reliability among multiple laboratories with respect to sample interference. Multiple samples from each of 22 sites representing an array of habitat types were analyzed using EPA Method 1611 and 1609 reagents with full strength and five-fold diluted extracts. The presence of interference was assessed three ways: using sample processing and PCR amplifications controls; consistency of results across extract dilutions; and relative recovery of target genes from spiked enterococci in water sample compared to control matrices with acceptable recovery defined as 50 to 200%. Method 1609, which is based on an environmental mastermix, was found to be superior to Method 1611, which is based on a universal mastermix. Method 1611 had over a 40% control assay failure rate with undiluted extracts and a 6% failure rate with diluted extracts. Method 1609 failed in only 11% and 3% of undiluted and diluted extracts analyses. Use of sample processing control assay results in the delta–delta Ct method for calculating relative target gene recoveries increased the number of acceptable recovery results. Delta–delta tended to bias recoveries from apparent partially inhibitory samples on the high side which could help in avoiding potential underestimates of enterococci — an important consideration in a public health context. Control assay and delta–delta recovery results were largely consistent across the range of habitats sampled, and among laboratories. The methodological option that best balanced acceptable estimated target gene recoveries with method sensitivity and avoidance of underestimated enterococci densities was Method 1609 without extract dilution and using the delta–delta calculation method. The applicability of this method can be extended by the analysis of diluted extracts to sites where interference is indicated but, particularly in these instances, should be confirmed by augmenting the control assays with analyses for target gene recoveries from spiked target organisms.

Journal of Microbiological Methods↗
USGS1996

Estimated depth to the water table and estimated rate of recharge in outcrops of the Chicot and Evangeline aquifers near Houston, Texas

In 1989, the U.S. Geological Survey, in cooperation with the Harris-Galveston Coastal Subsidence District, began a field study to determine the depth to the water table and to estimate the rate of recharge in outcrops of the Chicot and Evangeline aquifers near Houston, Texas. The study area comprises about 2,000 square miles of outcrops of the Chicot and Evangeline aquifers in northwest Harris County, Montgomery County, and southern Walker County. Because of the scarcity of measurable water-table wells, depth to the water table below land surface was estimated using a surface geophysical technique, seismic refraction. The water table in the study area generally ranges from about 10 to 30 foot below land surface and typically is deeper in areas of relatively high land-surface altitude than in areas of relatively low land- surface altitude. The water table has demonstrated no long-term trends since ground-water development began, with the probable exception of the water table in the Katy area: There the water table is more than 75 feet deep, probably due to ground-water pumpage from deeper zones. An estimated rate of recharge in the aquifer outcrops was computed using the interface method in which environmental tritium is a ground-water tracer. The estimated average total recharge rate in the study area is 6 inches per year. This rate is an upper bound on the average recharge rate during the 37 years 1953-90 because it is based on the deepest penetration (about 80 feet) of postnuclear-testing tritium concentrations. The rate, which represents one of several components of a complex regional hydrologic budget, is considered reasonable but is not definitive because of uncertainty regarding the assumptions and parameters used in its computation.

Texas↗
USGS1978

Backwater at bridges and densely wooded flood plains, Tallahala Creek at Waldrup, Mississippi

New techniques for predicting water-surface profiles, needed in the design of economical, structurally sound, and environmentally compatible stream crossings, are under investigation. The investigation has accelerated with the advent of digital computers capable of analyzing large quantities of data. Among the techniques is the development of two-dimensional (2-D) digital models. Field data are essential for development and evaluation of these techniques for predicting water-surface profiles. This atlas is the first of a series that will provide a wide range of field data.

Mississippi↗
USGS1978

Backwater at bridges and densely wooded flood plains, Bogue Chitto near Summit, Mississippi

New techniques for predicting water-surface profiles, needed in the design of economical, structurally sound, and environmentally compatible stream crossings, are under investigation. The investigation has accelerated with the advent of digital computers capable of analyzing large quatities of data. Among the techniques is the development of two-dimensional (2-D) digital models. Field data are essential for development and evaluation of these techniques for predicting water-surface profiles. This atlas is one of a series that provide a wide range of field data.

Mississippi↗
USGS2006

Measuring underground-explosion effects on water levels in surrounding aquifers

Underground detonations may produce observable effects in surrounding aquifers and wells. The nature and the duration of the effect at any observation point seem to depend on several factors such as the amount of energy released by the detonation, the geologic environment, the position of the buried explosive device in relation to the saturated zone, aquifer characteristics, and the distance from point of detonation. Precise measurement of these effects in wells presented numerous technical problems and resulted in the development of specialized techniques. Initially, these effects were observed by measuring the fluctuation of the free water surface in wells. The current technique employs high-resolution pressure transducers deep in the water column. Pneumatic packers may be used to restrict the movement of water into the well. Data are recorded on high-speed oscillographs.

Groundwater↗
USGS2014

Distribution of metals in water and bed sediment in a mineral-rich watershed, Montana, USA

We sampled the Blackfoot River (Montana) and its major tributaries from the headwaters of the basin to near its confluence with the Clark Fork River over the course of 5 days in August 1998. We measured streamflow, collected fine-grained (<63 μm) streambed sediment, and sampled the dissolved (operationally defined as < 0.2 μm) phase of the surface water using clean techniques. Water and sediment collected from near the historic Heddleston mining district contained the highest concentrations of most trace elements in the basin. Many solute trace metals were at their highest several kilometers downstream from the mining district, where the river flows through an unremediated marsh system that has collected mine wastes in the past. Downstream on the headwaters area, water and bed sediment metal concentrations declined sharply. Comparison of sediment samples with those collected by other workers in August 1989 and August 1995 do not show evidence of basin-scale long term changes, despite the onset of remediation efforts in 1993. The area of the proposed McDonald gold deposit near the confluence of the Landers Fork with the Blackfoot River was not contributing anomalous concentrations of naturally-occurring dissolved and bed-sediment metals into the basin.

Montana↗