USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Mustang”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS2007

Water-quality, sediment-quality, stream-habitat, and biological data for Mustang Bayou near Houston, Texas, 2004-05

The U.S. Geological Survey, in cooperation with the Houston-Galveston Area Council and the Texas Commission on Environmental Quality, collected water-quality, stream-habitat, and biological data from six sites (downstream order M6-M1) primarily in Brazoria County southeast of Houston, Texas, during September 2004-August 2005 and collected bed sediment data from one site in September 2005. Water-quality data collection consisted of continuously monitored (for periods of 24 hours to several days, six times) water temperature, pH, specific conductance, and dissolved oxygen and periodically collected samples of several properties and constituents. Monitored dissolved oxygen measurements were below minimum and 24-hour criteria at all sites except M2. Nitrogen compounds, phosphorus, biochemical oxygen demand, chlorophyll-a, E. coli, chloride, sulfate, solids, suspended sediment concentration, and pesticides were assessed at all sites. Concentrations of nitrogen compounds and phosphorus did not exceed Texas State screening levels. Biochemical oxygen demand was less than 4.0 milligrams per liter at all sites except M6, where the maximum concentration was 8.1 milligrams per liter. Concentrations of chlorophyll-a were less than the State screening level at all sites except M6, where four of eight samples equaled or exceeded the screening level. Twenty of 48 samples from Mustang Bayou had E. coli densities that exceeded the State single-sample water-quality standard. Median chloride concentrations from each site were between 42.2 and 123 milligrams per liter. Fifteen pesticide compounds (six herbicides and nine insecticides) were detected in 24 water samples. The most frequently detected pesticide was atrazine, which was found in every sample. Other frequently detected pesticides were 2-chloro-4-isopropylamino-6-amino-s-triazine (CIAT), prometon, tebuthiuron, fipronil, and the pesticide degradates, fipronil sulfide and fipronil sulfone. Sediment samples were collected from the stream bottom at M1 and analyzed for concentrations of trace elements (metals), polycyclic aromatic hydrocarbons, organochlorine pesticides, and polychlorinated biphenyls. No organochlorine pesticides or polychlorinated biphenyls were detected. No concentrations of metals exceeded State screening levels. Measurable concentrations of 11 polycyclic aromatic hydrocarbon (PAH) compounds were detected, and three other PAH compounds were detected but not quantified by the laboratory. Stream habitat and aquatic biota (benthic macroinvertebrates and fish) were surveyed at each site three times during the study to evaluate aquatic life use. Characteristics of habitat measured during each survey were scored using a habitat quality index. Average aquatic-life-use scores were 'limited' for M3-M6 and 'intermediate' for M1 and M2. A total of 2,557 macroinvertebrate individuals were identified from Mustang Bayou. Benthic macroinvertebrate assemblages were scored using indexes specified by the Texas Commission on Environmental Quality. Average aquatic-life-use scores were 'limited' at M1, 'intermediate' at M3-M6, and 'high' at M2. Forty-six species of fish representing 20 families were collected from Mustang Bayou. A total of 4,115 fish were collected. Sunfish (Centrarchidae) was the most abundant family, accounting for about 28 percent. Aquatic-life-use scores at sites in Mustang Bayou were determined using the regional index of biotic integrity for ecoregion 34 and were 'high' for all sites.

Data Series↗
USGS2009

Using the Soil and Water Assessment Tool (SWAT) to Simulate Runoff in Mustang Creek Basin, California

This study is an evaluation of the calibration and validation of the Soil and Water Assessment Tool (SWAT) version 2005 watershed model for the Mustang Creek Basin, San Joaquin Valley, California. The study is part of a national study on the process of agricultural chemical movement through the hydrologic system, which is being done by the U.S. Geological Survey (USGS) National Water-Quality Assessment program. The SWAT model was used to simulate streamflow in the Mustang Creek Basin on the basis of a set of model inputs derived and modified from various data sources. The 2005 version of the model was calibrated for 29 days in February 2004, and validated for 58 days in January and February 2005. Measured streamflow for a USGS gaging station was used for model calibration and validation. Results of the simulated monthly streamflow had a Nash Sutcliffe efficiency value of 0.72 during the calibration period. The 2005 version of the model was unsuccessful in simulating streamflow during the validation period, as indicated by a Nash Sutcliffe efficiency value of 0.33. This lack of a successful simulation probably is due to the limited amount of measured streamflow data available for calibration, the ephemeral nature of flows in Mustang Creek, and the fact that the SWAT model was developed primarily for long time period (2 years and more) simulations and not for limited monthly simulations as used in Mustang Creek.

Scientific Investigations Report↗
USGS2010

Fault zone structure from topography: signatures of en echelon fault slip at Mustang Ridge on the San Andreas Fault, Monterey County, California

We used high-resolution topography to quantify the spatial distribution of scarps, linear valleys, topographic sinks, and oversteepened stream channels formed along an extensional step over on the San Andreas Fault (SAF) at Mustang Ridge, California. This location provides detail of both creeping fault landform development and complex fault zone kinematics. Here, the SAF creeps 10–14 mm/yr slower than at locations ∼20 km along the fault in either direction. This spatial change in creep rate is coincident with a series of en echelon oblique-normal faults that strike obliquely to the SAF and may accommodate the missing deformation. This study presents a suite of analyses that are helpful for proper mapping of faults in locations where high-resolution topographic data are available. Furthermore, our analyses indicate that two large subsidiary faults near the center of the step over zone appear to carry significant distributed deformation based on their large apparent vertical offsets, the presence of associated sag ponds and fluvial knickpoints, and the observation that they are rotating a segment of the main SAF. Several subsidiary faults in the southeastern portion of Mustang Ridge are likely less active; they have few associated sag ponds and have older scarp morphologic ages and subdued channel knickpoints. Several faults in the northwestern part of Mustang Ridge, though relatively small, are likely also actively accommodating active fault slip based on their young morphologic ages and the presence of associated sag ponds.

California↗
USGS2019

Establishing high-frequency noise baselines to 100 Hz based on millions of power spectra from IRIS MUSTANG

Advances in seismic instrumentation have enabled data to be recorded at increasing sample rates. This has in turn created a need to establish higher-frequency baselines for assessing data quality, as the widely-used New High (NHNM) and Low Noise Models (NLNM) of Peterson (1993) do not extend to frequencies above 10 Hz. To provide a baseline for higher frequencies (10-100 Hz), we examine power spectral density probability density functions (PSDPDFs) for high-sample-rate stations available from the Incorporated Research Institutions for Seismology Data Services (IRIS DS) MUSTANG quality control system. We compute high-frequency high and low noise baselines by matching the appropriate composite PSDPDF percentile points to NHNM and NLNM power levels at overlapping frequencies (1-10 Hz) and then extending to higher frequencies (10-100 Hz) with piecewise linear fits to the matching PSDPDF percentile. We find that the Peterson NLNM remains an accurate representation of the lower bound of global ambient Earth noise since it is matched by only 0.1% of Global Seismographic Network (GSN) PSDs. We present high-frequency high and low noise baselines intended primarily for use by temporary networks targeting high-frequency signals (e.g. monitoring of aftershocks or induced seismicity) based on statistics of PSDPDFs from all publicly available high-sample-rate data. Most publicly-available high-sample-rate data is recorded by temporary deployments, and the experiment design and scientific targets of these deployments strongly influence the observed statistical distribution of high-frequency noise. We anticipate that the noise baselines presented here will be useful in automated quality control of high-sample-rate seismic data. However, we note that establishing a low noise model that accurately represents the lowest possible ambient Earth noise at frequencies up to 100 Hz will require additional continuous high-sample-rate data from high-quality permanent stations in low-noise environments.

Bulletin of the Seismological Society of America↗
USGS2000

Evaluation of geophysical logs and slug tests, phase II, at AIW Frank/Mid-County Mustang Superfund Site, Chester County, Pennsylvania

Between September 1997 and October 1998, nine monitor wells were drilled at the AIW Frank/Mid-County Mustang Superfund Site in Chester County, Pa., to determine the horizontal and vertical distribution of contaminated ground water migrating from known contaminant sources. The U.S. Geological Survey conducted borehole geophysical logging and borehole television surveys in these boreholes to identify water-producing zones so that appropriate intervals could be screened in each borehole. Caliper logs and borehole television surveys were used to locate fractures; inflections on fluid-temperature and fluid-resistivity logs were used to locate possible water-bearing fractures, and heatpulseflowmeter measurements verified these locations. The borehole television surveys indicated that locally, the rocks of the Conestoga Limestone and Ledger Dolomite that underlie the site strike generally from northeast-southwest to east-west and dip steeply to the southeast and south approximately 63? to 76?. Slug tests were conducted at six boreholes to estimate transmissivity. Transmissivity from slug tests ranged from 21 feet squared per day in borehole CH-5669 to greater than 12,000 feet squared per day in boreholes CH-5665 and CH-5667. After interpretation of geophysical logs, borehole television surveys, and driller's logs, all boreholes were screened such that water-level fluctuations could be monitored and discrete water samples collected from one or more water-producing zones in each borehole.

Open-File Report↗
USGS2001

Evaluation of borehole geophysical logs and hydraulic tests, phase III, at AIW Frank/Mid-County Mustang Superfund Site, Chester County, Pennsylvania

Borehole geophysical logs, heatpulse-flowmeter measurements, and aquifer-isolation tests were used to characterize the ground-water-flow system at the AIW Frank/Mid-County Mustang Superfund Site. The site is underlain by fractured carbonate rocks. Caliper, natural-gamma, single-point-resistance, fluid-resistivity, and fluid-temperature logs were run in six wells, and an acoustic borehole televiewer and borehole deviation log was run in one well. The direction and rate of borehole-fluid movement was measured with a high-resolution heatpulse flowmeter for both nonpumping and pumping conditions in four wells. The heatpulse-flowmeter measurements showed flow within the borehole during nonpumping conditions in three of the four wells tested. Flow rates up to 1.4 gallons per minute were measured. Flow was upward in one well and both upward and downward in two wells. Aquifer-isolation (packer) tests were conducted in four wells to determine depth-discrete specific capacity values, to obtain depth-discrete water samples, and to determine the effect of pumping an individual fracture or fracture zone in one well on water levels in nearby wells. Water-level data collected during aquifer-isolation tests were consistent with and confirmed interpretations of borehole geophysical logs and heatpulse-flowmeter measurements. Seven of the 13 fractures identified as water-producing or water-receiving zones by borehole geophysical methods produced water at a rate equal to or greater than 7.5 gallons per minute when isolated and pumped. The specific capacities of isolated fractures range over three orders of magnitude, from 0.005 to 7.1 gallons per minute per foot. Vertical distribution of specific capacity between land surface and 298 feet below land surface is not related to depth. The four highest specific capacities, in descending order, are at depths of 174-198, 90-92, 118-119, and 34-37 feet below land surface.

Pennsylvania↗
USGS2021

Nest site selection of White-tailed Hawks (Geranoaetus albicaudatus) on Texas barrier islands

The distribution of the White-tailed Hawk ( Geranoaetus albicaudatus ) in the United States is restricted to the prairies and savannas of the Gulf Coastal Plain of Texas. Although listed as a state threatened species, it remains one of the least studied raptors in North America. It appears to reach high densities on some Texas barrier islands despite the island vegetation communities being structurally simple and providing few nesting substrates. We compared vegetation and landscape characteristics for sets of White-tailed Hawk nest sites and random sites on 3 Texas barrier islands (Matagorda, Mustang, and North Padre) representing a gradient of low to high human presence and impact. We constructed model sets consisting of vegetation and landscape features measured at a random subsample of nest sites and random sites, then assessed model sets with logistic regression. Our best constructed model correctly differentiated 83% of nest sites from random sites on Matagorda Island, 70% on Mustang Island, and 50% on North Padre Island. Overall, it appears that the structure of nest substrates was important to White-tailed Hawk nest-site selection: shrubs categorized as densely structured with or without thorns accounted for 78% of nest substrates compared to only 13% of paired, random potential substrates. The most frequently selected nest substrates overall were yaupon ( Ilex vomitoria ; 43%) and Macartney rose ( Rosa bracteata ; 24%). If White-tailed Hawks are to be conserved on the barrier islands, a balance will need to be found between continued anthropogenic development, maintenance of habitat patches, and availability of suitable nesting substrates.

Texas↗
USGS2020

How processing methodologies can distort and bias power spectral density estimates of seismic background noise

Power spectral density (PSD) estimates are widely used in seismological studies to characterize background noise conditions, assess instrument performance, and study quasi‐stationary signals that are difficult to observe in the time domain. However, these studies often utilize different processing techniques, each of which can inherently bias the resulting PSD estimates. The level of smoothing, the size of the data window, and the method used for actually estimating the spectral content can all have strong influences on PSD estimates and background noise statistics. We show that although smoothing reduces the variance of the PSD estimate, the corresponding decrease in frequency resolution can eliminate or distort features of interest. For instance, popular software packages such as Incorporated Research Institutions for Seismology Modular Utility for STAatistical kNowledge Gathering (MUSTANG) and earlier versions of Portable Array Seismic Studies of the Continental Lithosphere Quick Look eXtended (PQLX), which were designed for data quality control and are effective in that regard, are less suitable for scientific studies that require accurate resolution of spectral peaks, even for peaks as broad as the primary ( ⁠ ∼ 14    s "> ∼ 14 s period) and secondary ( ⁠ ∼ 7    s "> ∼ 7 s period) microseisms. We also demonstrate how the 1 and 3 hr data windows used in MUSTANG and PQLX can be strongly influenced by energy generated from moderate‐size ( ⁠ M > ∼ 4.8 "> M > ∼ 4.8 ⁠ ) teleseismic earthquakes. The ubiquity of these events is likely skewing median ambient‐noise estimates by as much as 5 dB upward, for periods of 10–50 s at high‐quality broadband stations. Finally, we illustrate that many of the discrepancies between global low‐noise models are attributable to processing methodologies rather than fundamental differences in the underlying seismic data.

Seismological Research Letters↗
USGS2020

Distribution of aseismic deformation along the central San Andreas and Calaveras Faults from differencing repeat airborne lidar

Fault creep reduces seismic hazard and serves as a window into plate boundary processes; however, creep rates are typically constrained with sparse measurements. We use differential lidar topography (11–13 year time span) to measure a spatially dense surface deformation field along a 150 km section of the Central San Andreas and Calaveras faults. We use an optimized windowed‐iterative‐closest‐point approach to resolve independent creep rates every 400 m at 1–2 km apertures. Rates vary from <10 mm/year along the creeping fault ends to over 30 mm/year along much of the central 100 km of the fault. Creep rates are 3–8 mm/year higher than most rates from alignment arrays and creepmeters, likely due to the larger aperture of the topographic differencing. Creep is often focused along discrete fault traces, but strain is sometimes distributed in areas of complex fault geometry, such as Mustang Ridge. Our observations constrain shallow seismic moment accumulation and the location of the creeping fault trace.

California↗
USGS2012

Paleomagnetism of three upper Jurassic ash-flow sheets in southeastern Arizona: Implications for regional deformation

A sequence of three petrologically distinct Upper Jurassic ash-flow tuffs has been sampled for paleomagnetic analysis in the Huachuca Mountains, Canelo Hills, and Mustang Mountains of southeastern Arizona. Site-mean paleomagnetic directions for these units indicate significant vertical-axis rotations between sampling localities (≃15°–40°), and a comparison of these and previously published data with reference directions from the Colorado Plateau implies that the Jurassic rocks in southeastern Arizona have been rotated in a clockwise sense with respect to stable North America. These new data are consistent with paleomagnetic results showing clockwise rotation of Upper Cretaceous rocks in south central Arizona, and further indicate that studies of North American apparent polar wander based on rocks from southern Arizona could be subject to error. The clockwise rotations in southern Arizona are likely related to Late Cretaceous and early Tertiary strike-slip movement on northwest-trending high-angle faults in the region, and this movement may be linked to an increase in oblique Farallon-North American plate convergence at that time.

Arizona↗
USGS2006

A field guide to the central, creeping section of the San Andreas fault and the San Andreas Fault Observatory at Depth

This field trip is along the central section of the San Andreas fault and consists of eight stops that illustrate surface evidence of faulting, in general, and features associated with active fault creep, in particular. Fault creep is slippage along a fault that occurs either in association with small-magnitude earthquakes or without any associated large-magnitude earthquakes. Another aspect of the trip is to highlight where there are multiple fault traces along this section of the San Andreas fault zone in order to gain a better understanding of plate-boundary processes. The first stop is along the Calaveras fault, part of the San Andreas fault system, at a location where evidence of active fault creep is abundant and readily accessible. The stops that follow are along the San Andreas fault and at convenient locations to present and discuss rock types juxtaposed across the fault that have been transported tens to hundreds of kilometers by right-lateral motion along the San Andreas fault. Stops 6 and 7 are examples of recent studies of different aspects of the fault: drilling into the fault at the depth of repeating magnitude (M) 2 earthquakes with the San Andreas Fault Observatory at Depth (SAFOD) and the geological, geophysical, and seismological study of M 6 earthquakes near the town of Parkfield. Along with the eight official stops on this field trip are 12 “rolling stops”—sites of geologic interest that add to the understanding of features and processes in the creeping section of the fault. Many of the rolling stops are located where stopping is difficult to dangerous; some of these sites are not appropriate for large vehicles (buses) or groups; some sites are not appropriate for people at all. We include photographs of or from many of these sites to add to the reader's experience without adding too many stops or hazards to the trip. An extensive set of literature is available for those interested in the San Andreas fault or in the creeping section, in particular. For more scientifically oriented overviews of the fault, see Wallace ( 1990 ) and Irwin ( 1990 ); for a more generalized overview with abundant, colorful illustrations, see Collier ( 1999 ). Although the presence of small sections of the San Andreas fault was known before the great 1906 San Francisco earthquake, it was only after that event and subsequent geologic investigations reported in Lawson ( 1908 ) that showed the fault as a long structure, extending all the way from east of Los Angeles into northern California. Prentice ( 1999 ) described the importance of the 1908 “Lawson report” and how it pivotally influenced the understanding of the San Andreas. Hill ( 1981 ) presented a wonderful introduction to the evolution of thought on the San Andreas. Geologic maps and maps of the most recently active fault trace in the creeping section, or large parts of it, include those by Brown ( 1970 ), Dibblee ( 1971 , 1980 ), and Wagner et al. ( 2002 ); detailed geologic maps are discussed at various stops in this guide. Various aspects of the creeping section of the San Andreas fault have been the focus of many geologic field trips in the past few decades. Guidebooks for some of those trips include those by Gribi ( 1963a , 1963b ), Brabb et al. ( 1966 ), Rogers ( 1969 ), Bucknam and Haller ( 1989 ), Harden et al. ( 2001 ), and Stoffer ( 2005 ). The creeping section of the San Andreas fault zone lies between areas that experienced large-displacement surface breakage during great earthquakes in 1857 and 1906 (Fig. 1 inset). Burford and Harsh ( 1980 ) divided the creeping section into three segments: (1) a northwest section where the creep rate increases to the southeast in step-like increments, (2) a central section where the creep rate is relatively constant at a maximum value of ∼30 mm/yr (∼1.2 in/yr), and (3) a southeast section where the creep rate decreases to the southeast (Fig. 2 ). The rate of slip along the creeping section of the fault zone has been measured using creepmeters, alignment arrays, and laser distance-measuring devices. The aperture of measurements over which these measurements are made ranges from 10 m (∼33 ft) (creepmeters) to 100 m (∼330 ft) (alignment arrays) to kilometers and tens of kilometers (laser measuring devices). Creepmeter and alignment-array measurements are here termed “near-fault” measurements; laser measurements over distances of 1–2 km (∼0.6–1.2 mi) are termed “intermediate-scale” measurements; laser measurements over tens of kilometers (miles) are termed “broadscale” measurements. Comparisons among near-fault, intermediate-scale, and broadscale measurements and geologic maps show that the northwest part of the creeping section of the fault is composed of two narrow zones of active deformation, one along the San Andreas fault and one along the Calaveras-Paicines fault, whereas the central and southeast sections are both composed of a single relatively narrow zone of deformation. The southeast section is transitional to a locked zone southeast of Cholame; a locked fault is one that slips only in association with a moderate to large earthquake. Throughout the creeping section of the San Andreas fault zone, broadscale measurements generally indicate more deformation than near-fault and intermediate-scale measurements, which are in reasonably close agreement except at Monarch Peak (Mustang Ridge), near the center of the creeping section and our Stop 5 ((Figs. 1 ) and 2 ). Features that we see on this trip include offset street curbs, closed depressions (sag ponds), fault scarps (steep slopes formed by movement along a fault), a split and displaced tree, offset fence lines, fresh fractures, and offset road lines (Fig. 3 is a sketch showing some of the landforms that represent deformation by an active fault). We also see evidence of long-term maturity of the San Andreas fault, as indicated by fault features and displaced rock types (Fig. 4 ). Finally, we will visit sites of ongoing research into the processes associated with earthquakes and their effects. Discussions include drilling into the San Andreas fault at the SAFOD drill site and the 2004 Parkfield earthquake and its effects and implications.

California↗