Reply to Comments by Kelletat (2008) comments to Dawson, A.G. and Stewart, I. (2007) tsunami deposits in the geological record [Sedimentary Geology, 200, 166-183]
[No abstract available]
Sedimentary Geology↗
SEARCH · USGS Science
Results for “Sedimentary Geology”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Geology of the Arabian Peninsula: Sedimentary geology of Saudi Arabia
Systematic mapping of the sedimentary geology of Saudi Arabia by Arabian-American Oil Co. (Aramco) began in 1933. By 1959, exploration parties of one type or another had surveyed more than 1,300,000 square kilometers (500,000 square miles) of sedimentary outcrop. The foundation for sedimentary deposition is the Arabian Shield a vast Precambrian complex of igneous and metamorphic rocks that occupies roughly one-third of the Arabian Peninsula in the west and crops out sporadically along the southern coast. Since the outset of the Paleozoic Era the shield has been amazingly stable, subject only to gentle, epeirogenic movement. On this rigid land mass was deposited an aggregate total of nearly 5,500 meters (18,000 feet) of sedimentary rocks ranging in age from presumed Cambrian to Pliocene(?). Paleozoic, Mesozoic, and lower Tertiary strata are magnificently exposed in central Arabia where they crop out in a great curved belt bordering the shield. Here the landscape is dominated by a series of essentially parallel west-facing escarpments, each supported by a resistant limestone cap. Exposures are unusually good, and many rock units can be traced without significant interruption for 500 to nearly 1,000 km. Beds reflecting buried basement configuration dip gently and uniformly away from the escarpment region into the Persian Gulf and Rub' al Khali basins. East of the escarpment belt is a broad expanse of relatively low-relief terrain in which Tertiary and younger deposits effectively mask older units. Clues to the character of pre-Tertiary rocks in this large area, which includes the Rub' al Khali desert and most of northeastern Arabia, are afforded only by widely scattered bore holes and oil wells. In extreme northwestern Arabia, largely lower Paleozoic sedimentary rocks are exposed, although a basinal area bordering the Paleozoic rocks on the north is characterized by thick Upper Cretaceous to Tertiary strata. Tertiary to Recent volcanic rocks cover substantial parts of the area. In general the older sedimentary rocks are exposed in north-central and northwestern Arabia near the Precambrian basement where as much as 2,000 m of lower Paleozoic rocks are present. Although unfossiliferous, the lower 600 m can be equated, at least in part, to rocks of certain Cambrian age in Jordan. Higher beds contain intervals confidently dated as Lower Ordovician, Silurian, and Lower Devonian. Lower Paleozoic rocks are chiefly coarse-grained sandstone of terrestrial origin, although marine shale occurs at several levels and the upper 300 m is mainly shale with thin beds of limestone. Lower Paleozoic strata are succeeded in the central escarpment region by a thick sequence (about 1,000 m) of Upper Permian and Triassic sedimentary rocks. The initial deposit, the Khuff Formation, is mostly shallow-water limestone; overlying beds are nonmarine elastics except for thick carbonate units in the middle part of the section. Above the Triassic System is some 200 to 500 m of Lower and Middle Jurassic rocks which, near the middle of the escarpment region, are interbedded marine shale and shelf limestone. These grade to sandstone, in part continental, in the northern and southern areas of outcrop. The Middle Jurassic is overlain by a great sequence-of nearly pure carbonate rocks, highly fossiliferous and accurately dated as Upper Jurassic and early Lower Cretaceous. The Jurassic System is spectacularly displayed in central Arabia where it forms the backbone of the escarpment region the Tuwayq Mountains. Carbonate sedimentation was interrupted several times in the closing stages of the Jurassic b^ the onset of evaporite conditions which gave rise to cyclic deposits of anhydrite and calcarenite. The resulting sequence the Arab Formation is of prime importance for its porous carbonate members contain billions of barrels of proved oil reserves The carbonate sequence is succeeded by a thick body of late Lower and Middle Cretaceous sandstone. (The Middle Cretaceous Series and Epoch, as defined by European geologist-, are used in this report.) Late Lower Cretaceous rocks are nonmarine and appear only in the middle and southern parts of the escarpment region. Middle Cretaceous rocks, nonmarine in the south, become progressively more marine in the north where they follow a transgressive path northwest across older beds as far as Jordan. Upper Cretaceous and Eocene rocks, almost exclusively in limestone and dolomite facies, are extensively exposed alorc the eastern edge of the escarpment belt and continue northwest into Iraq. The sequence, with an average thickness of about 5^0 m, includes rocks of Upper Cretaceous, Paleocene, lower Eocene, and middle Eocene ages. The stratigraphic sequence above the Eocene consists of 200 to 600 m of Miocene and Pliocene rocks, mostly of nonmarine origin. These deposits a heterogeneous assemblage of marly sandstone, sandy marl, and sandy limestone blanket the Rub' al Khali and northeastern Arabia. Above the Miocene and Pliocene rocks are unconsolidated Quaternary deposits which comprise great sand deserts and widespread gravel sheets. Sand of the Rub' al Khali Desert alone covers about 600,000 sq km (230,000 sq mi) or most of southern Arabia. Two major structural provinces are recognized within the Arabian Peninsula and adjacent areas. One is the comparatively stable interior region whose rigidity is controlled by the Precambrian basement. The other is the great mobile belt of Taurus, Zagros, and Oman Mountains, bordering the stable region on the north and east. Saudi Arabia falls entirely within the stable region. The interior stable region contains the Arabian shield as well as the Arabian Shelf an extension of the basement thinly veneered with little-disturbed sedimentary rocks. Widespread structural events, presumably related to epeirogenic movement within the basement, have divided the Arabian Shelf into several distinct and significant structural elements the Interior Homocline, the Interior Platform, and several basinal areas. Bordering the shield is a great belt of sedimentary rocks whose dip basinward is so slight and uniform as to be impreceptible to the eye. This Interior Homocline has an average width of about 400 km and a persistent dip varying from slightly more than 1°00' in older units to less than 0°30' in the youngest. One structural feature of the homocline the central Arabian arch has greatly influenced the present surface distribution of sedimentary rocks in the interior escarpment region. The arch, which affects all rocks from the basement up, marks the area of maximum curvature of the homocline in central Arabia. Although the arch has a varied history, it is apparently a residual high between the periodically sinking Persian Gulf and Rub' al Khali basins rather than a true independent positive feature. Support for this concept conies from the presence of a great arc of tensional structures the central Arabian graben and trough system near the crest of the arch and along the hinge line between the Persian Gulf basin and the stable western block. Bordering the homocline is the Interior Platform, a remarkably flat area of varying width in which systematic dip off the crystalline core no longer prevails. Superimposed on the platform are several major north-south anticlinal trends which include the great oil fields of Arabia Adjacent to the platform are several basinal areas that have from time to time received thick sedimentary deposits. Such basinal sags have developed on the shelf in the northeastern Rub' al Khali, northern Persian Gulf, Dibdibah and Sirhan-Turayf areas.
Professional Paper↗
Bibliography of the geology of sedimentary phosphorite and igneous apatite
Ten indexed listings are given for world-wide publications related to the geology of sedimentary phosphorite and igneous apatite. The bibliography contains 4,957 references.
Open-File Report↗
Sea-floor geology and sedimentary processes in the vicinity of Cross Rip Channel, Nantucket Sound, offshore southeastern Massachusetts
Gridded multibeam bathymetry covers approximately 10.4 square kilometers of sea floor in the vicinity of Cross Rip Channel in Nantucket Sound, offshore southeastern Massachusetts. Although originally collected for charting purposes during National Oceanic and Atmospheric Administration hydrographic survey H12007, these acoustic data, and the sea-floor sediment sampling and bottom photography stations subsequently occupied to verify them, show the composition and terrain of the seabed and provide information on sediment transport and benthic habitat. This report is part of an expanding series of cooperative studies by the U.S. Geological Survey, National Oceanic and Atmospheric Administration, and Massachusetts Office of Coastal Zone Management that provide a fundamental framework for research and resource-management activities (for example, windfarms, pipelines, and dredging) along the inner continental shelf offshore of Massachusetts.
Massachusetts↗
Geologic setting, sedimentary architecture, and paragenesis of the Mesoproterozoic sediment-hosted Sheep Creek Cu-Co-Ag deposit, Helena embayment, Montana
The northern margin of the Helena Embayment contains extensive syngenetic to diagenetic massive pyrite horizons that extend over 25 km along the Volcano Valley-Buttress fault zone and extend up to 8 km basinward (south) within the Mesoproterozoic Newland Formation. The Sheep Creek Cu-Co deposit occurs within a structural block along a bend in the fault system, where replacement-style chalcopyrite mineralization is spatially associated mostly with the two stratigraphically lowest massive pyrite zones. These mineralized pyritic horizons are intercalated with debris flows derived from synsedimentary movement along the Volcano Valley-Buttress fault zone. Cominco American Inc. delineated a geologic resource of 4.5 Mt at 2.5% Cu and 0.1% Co in the upper sulfide zone and 4 Mt at 4% Cu within the lower sulfide zone. More recently, Tintina Resources Inc. has delineated an inferred resource of 8.48 Mt at 2.96% Cu, 0.12% Co, and 16.4 g/t Ag in the upper sulfide zone. The more intact upper sulfide zone displays significant thickness variations along strike thought to represent formation in at least three separate subbasins. The largest accumulation of mineralized sulfide in the upper zone occurs as an N-S–trending body that thickens southward from the generally E trending Volcano Valley Fault and probably occupies a paleograben controlled by normal faults in the hanging wall of the Volcano Valley Fault. Early microcrystalline to framboidal pyrite was accompanied by abundant and local barite deposition in the upper and lower sulfide zones, respectively. The sulfide bodies underwent intense (lower sulfide zone) to localized (upper sulfide zone) recrystallization and overprinting by coarser-grained pyrite and minor marcasite that is intergrown with and replaces dolomite. Silicification and paragenetically late chalcopyrite, along with minor tennantite in the upper sulfide zone, replaces fine-grained pyrite, barite, and carbonate. The restriction of chalcopyrite to inferred synsedimentary E- and northerly trending faults and absence of definitive zonation with respect to the Laramide Volcano Valley Fault in the lower sulfide zone suggest a diagenetic age related to basin development for the Sheep Creek Cu-Co-Ag deposit.
Montana↗
Quaternary geology and sedimentary processes in the vicinity of Six Mile Reef, eastern Long Island Sound
Six Mile Reef, a sandy, 22-m-high shoal trending east-west and located about 7.8 km off the Connecticut coast, has a core of postglacial marine deltaic deposits mantled by tidally reworked modern sediments. Sedimentary environments off the eastern end of the shoal are characterized by processes associated with long-term erosion or nondeposition, a mobile-sediment-limited seafloor armored by gravelly sand, and scattered elongate fields of barchanoid sand waves. The barchanoid waves reach amplitudes of 20 m, are concave westward, and occur in individual and coalesced forms that become progressively more complex westward. The seafloor on and adjacent to the shoal is characterized by processes associated with coarse bedload transport and covered primarily with asymmetrical transverse sand waves. The transverse waves exceed 8 m in amplitude, have slip faces predominantly oriented to the west and southwest, and have straight, slightly sinuous, and curved crests. Megaripples, which mimic the asymmetry of the sand waves, are commonly present on stoss slopes and in troughs; current ripples are ubiquitous. The amplitude and abundance of large bedforms decrease markedly westward of Six Mile Reef. The seabed there is covered with small, degraded ripples, reflecting lower-energy environments and processes associated with sorting and reworking of seafloor sediments. Megaripples and current ripples on the sand waves suggest that transport is active and that the bedforms are propagating under the present hydraulic regime. Net bedload sediment transport is primarily to the west, as evidenced by textural trends of surficial sediments, orientation of the barchanoid waves, and asymmetry of the transverse waves and of the scour marks around bedrock outcrops, boulders, and shipwrecks. One exception occurs at the western tip of the shoal, where sand-wave morphology indicates long-term eastward transport, suggesting that countercurrents in this area shape the shoal and are important to its maintenance.
Long Island Sound↗
A summary of the geology of sedimentary basins of the United States, with reference to the disposal of radioactive wastes
Explore the source record for details and available documents.
Open-File Report↗
Geology of sedimentary rocks in southern Yellowstone National Park, Wyoming
No abstract available.
Idaho, Montana, Wyoming↗
A summary of the geology of sedimentary basins of the United States, with reference to the disposal of radioactive wastes
No abstract available.
Trace Elements Investigations↗
Archive of chirp subbottom data collected during USGS cruise ORGN00005, northeastern Gulf of Mexico, 15 February-2 March 2000
In 1999, the Gulf of Mexico Fishery Management Council recommended that NOAA 's National Marine Fisheries Service establish two approximately 11-square-mile areas on the shelf edge in the northeastern Gulf of Mexico as no-fishing areas. One of the areas, the Madison-Swanson Marine Protected Area ( MPA ) lies about 100 km south of Panama City, Florida. The second area, Steamboat Lumps MPA lies about 150 km SSE of Madison-Swanson. The high-resolution seismic-reflection data contained herein were collected as part of a larger study of the effectiveness of no-fishing reserves in protecting grouper spawning aggregations. These subbottom profiles will be used in conjunction with other data to map the seafloor geology and the character and extent of benthic habitats within and surrounding the two MPAs. They show the shape and acoustic impedence of the seafloor and the thicknesses and orientations of shallow subsurface horizons. These data may be helpful in the following applications: choosing biological monitoring sites management decisions in the MPA s choosing sites for future MPA s studies of paleo-sealevel studies of the inter-relationships between seafloor geology and benthic ecology studies of sedimentary geology and geologic framework of the northeastern Gulf of Mexico
Open-File Report↗
Anatomy and dynamics of a floodplain, Powder River, Montana, U.S.A.
Centimeter-scale measurements on several Powder River floodplains provide insights into the nature of overbank depositional processes that created the floodplains; during a 20-year period after a major flood in 1978. Rising stages initially entered across a sill at the downriver end of the floodplains. Later, as stages continued to rise, water entered the floodplains through distinct low saddles along natural levees. The annual maximum depth of water over the levee crest averaged 0.19 in from 1983 through 1996, and the estimated flow velocities were approximately 0.15 m s-1. Water ponded in the floodplain trough, a topographic low between the natural levee and the pre-flood riverbank, and mud settled as thin layers of nearly constant thickness. Mud layers alternated with sand layers, which were relatively thick near the channel. Together, these beds created a distinctive natural levee. In some locations, individual flood deposits began as a thin mud layer that gradually coarsened upwards to medium-grained sand. Coarsening-upwards sequences form initially as mud because only the uppermost layers of water in the channel supply the first overbank flows, which are rich in mud but starved of sand. At successively higher stages, fine sands and then medium sands increase in concentration in the floodwater and are deposited as fine- and medium-sand layers overlying the initial mud layer. Theoretical predictions from mathematical models of sediment transport by advection and diffusion indicate that these processes acting alone are unlikely to create the observed sand layers of nearly uniform thickness that extend across much of the floodplain. We infer that other transport processes, notably bedload transport, must be important along Powder River. Even with the centimeter-scale measurements of floodplain deposits, daily hydraulic data, and precise annual surface topographic surveys, we were unable to determine any clear correspondence between the gauged flow record of overbank floods and the depositional layers mapped in the floodplain. These results provide a detailed example of floodplain deposits and depositional processes that should prove useful for interpreting natural levee deposits in a variety of geologic settings. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).
Journal of Sedimentary Research↗
A simple autocorrelation algorithm for determining grain size from digital images of sediment
Autocorrelation between pixels in digital images of sediment can be used to measure average grain size of sediment on the bed, grain-size distribution of bed sediment, and vertical profiles in grain size in a cross-sectional image through a bed. The technique is less sensitive than traditional laboratory analyses to tails of a grain-size distribution, but it offers substantial other advantages: it is 100 times as fast; it is ideal for sampling surficial sediment (the part that interacts with a flow); it can determine vertical profiles in grain size on a scale finer than can be sampled physically; and it can be used in the field to provide almost real-time grain-size analysis. The technique can be applied to digital images obtained using any source with sufficient resolution, including digital cameras, digital video, or underwater digital microscopes (for real-time grain-size mapping of the bed). ?? 2004, SEPM (Society for Sedimentary Geology).
Journal of Sedimentary Research↗
Mudstone sedimentation at high latitudes: Ice as a transport medium for mud and supplier of nutrients
Controls on mudstone deposition at high latitudes are poorly known relative to low latitudes. In recent sediments deposited in these environments, ice significantly influences sediment transport and primary productivity. The products of ice transport are relatively well known in glacimarine settings, but are less well known from below melting sea ice. This latter setting is significant as today it is associated with high primary organic productivity. The aim of this study is to assess how sea ice might have controlled lithofacies variability and organic-matter distribution and preservation in an ancient marine, siliciclastic mudstone-dominated succession deposited at high latitudes. Combined sedimentary logging, optical and electron optical (back-scatte red electron imagery), geochemical, and isotopic methods were used to determine sample variability in forty-five samples collected from the Lower Cretaceous succession in the Mikkelsen Bay State #1 borehole (North Slope, Alaska). The succession overall fines upward and contains muddy sandstones and sand- and silt-bearing, clay-rich mudstones towards its base in contrast to clay-rich and clay-dominated mudstones towards its top. Some of the mudstone units exhibit thin (< 5 mm), relic-beds that fine upward weakly. In some units small (0.5 mm), bed-parallel silt-filled microburrows disrupt depositional laminae whereas in others pervasive burrowing completely obliterates original depositional textures. Many of the units are pelleted. These mudstones are unusual in that they contain minor but very striking outsize grains, composed of subrounded to rounded sand and granule-size material. In addition, they are good petroleum source rocks, with between 2.8 and 5.9 wt % total organic carbon, of predominantly Type II kerogen. The organic matter has an isotopic signature ranging from -25.4??? ??13C to -28.1??? ??13C. Thin tuffs (< 20 mm) and carbonate-cemented units are also present. Given the absence of significant polar ice in the Early Cretaceous the outsized grains are interpreted to have been deposited from a combination of melting, dirty anchor, and fast ice. The mud fraction, which forms the bulk of the sediment, is interpreted to have been deposited from melting, sediment-laden frazil ice, and fast ice. After deposition sediments were partially reworked by bottom currents generated by brine rejection during sea ice formation. Sympagic organisms, grazing on algae and bacteria both within and below the ice, pelleted the sediment. Bioturbation, which varies through the succession, indicates that sedimentation probably occurred beneath a predominantly oxic or dysoxic water column. In this setting productivity was fueled by nutrients released from melting sea ice in the marginal ice zone. The good petroleum source potential of these mudstones is attributed to high organic productivity coupled to episodic and rapid sedimentation rather than existence of bottom-water anoxia linked to upwelling. Because sea-ice rafting was probably the dominant sediment transport mechanism it is not appropriate to use sequence stratigraphic methodology to predict lithofacies variability in this environment. Copyright ?? 2005, SEPM (Society for Sedimentary Geology).
Journal of Sedimentary Research↗
Stratigraphic response across a structurally dynamic shelf: The latest guadalupian composite sequence at Walnut Canyon, New Mexico, U.S.A
The uppermost Yates and Tansill formations (Late Permian), as exposed along Walnut Canyon in Carlsbad Caverns National Park, New Mexico, USA, provide a unique opportunity to document the depositional architecture of a progradational, oversteepened, and mechanically failure-prone carbonate platform. Detailed facies mapping permitted critical assessment of depositional processes operating along this structurally dynamic platform margin. At the shelf crest, thick (12 m), vertically stacked fenestral-pisolite-tepee complexes indicate a stable shoreline. Early lithification of sediments and extensive cementation fostered rapid vertical accretion and allowed the shelf crest to easily adjust to base-level oscillations by stepping landward, stepping seaward, or aggrading. This production imbalance-in combination with syndepositional brittle failure and down-to-the-basin tilting(< 5??)-generated 22 m of depositional relief as measured from nearly horizontal (< 2??) shelf-crest toplap to an outer-shelf downlap surface (< 1??). Mechanical failure of Capitan-equivalent back-reef strata is constrained by stratigraphic architecture, fracture properties, and a highly refined fusulinid biostratigraphic framework. Where fractures tip out, down-to-the-basin rotation is often observed with concurrent seaward thickening of overlying beds, indicating that such fractures functioned as a syndepositional hinge. A facies disjunction and horizontally juxtaposed fusulinid zonation were documented across an 80?? seaward-dipping dilational fracture filled with polymict breccia. An overlying damage zone consisting of spar-cemented fractures nested within silt-filled fractures illustrates periodic reactivation. Field relationships indicate that the dilational fracture approximates a paleoescarpment that resulted from catastrophic failure of the Capitan platform margin. Younger strata onlapped the paleoescarpment and gradually filled the reentrant. This mechanically compromised paleoescarpment was subsequently reactivated during the latest Guadalupian lowstand and was subaerially filled by siliciclastics and polymict breccia derived from the platform top. Results from Walnut Canyon indicate that shelf crest aggradation dominantly controlled the shelf-crest to outer-shelf profile, although this was temporarily modified by brittle failure and down-to-the-basin tilting, and mass wasting. Copyright ?? 2010, SEPM (Society for Sedimentary Geology).
Journal of Sedimentary Research↗
Quantitative mineralogy of surface sediments of the Iceland shelf, and application to down-core studies of holocene ice-rafted sediments
Quantitative X-ray diffraction analyses on the < 2 mm sediment fraction from the Iceland shelves are reported for subglacial diamictons, seafloor surface sediments, and the last 2000 cal yr BP from two cores. The overall goal of the paper is to characterize the spatial variability of the mineralogy of the present-day surface sediments (18 non-clay minerals and 7 clay minerals), compare that with largely in situ erosional products typified by the composition of subglacial diamictons, and finally examine the late Holocene temporal variability in mineral composition using multi-mineral compositions. The subglacial diamictons are dominated in the non-clay-mineral fraction by the plagioclase feldspars and pyroxene with 36.7 ?? 6.1 and 17.9 ?? 3.5 wt % respectively, with smectites being the dominant clay minerals. The surface seafloor sediments have similar compositions although there are substantial amounts of calcite, plus there is a distinct band of sites from NW to N-central Iceland that contain 1-6 wt% of quartz. This latter distribution mimics the modern and historic pattern of drift ice in Iceland waters. Principal component analysis of the transformed wt% (log-ratio) non-clay minerals is used to compare the subglacial, surface, and down-core mineral compositions. Fifty-eight percent of the variance is explained by the first two axes, with dolomite, microcline, and quartz being important "foreign" species. These analyses indicate that today the NW-N-central Iceland shelf is affected by the import of exotic minerals, which are transported and released from drift ice. The down-core mineralogy indicates that this is a process that has varied over the last 2000 cal yr BP. Copyright ?? 2007, SEPM (Society for Sedimentary Geology).
Journal of Sedimentary Research↗
Response of Late Cretaceous migrating deltaic facies systems to sea level, tectonics, and sediment supply changes, New Jersey Coastal Plain, U.S.A.
Paleogeographic, isopach, and deltaic lithofacies mapping of thirteen depositional sequences establish a 35 myr high resolution (> 1 Myr) record of Late Cretaceous wave- and tide-influenced deltaic sedimentation. We integrate sequences defined on the basis of lithologic, biostratigraphic, and Sr-isotope stratigraphy from cores with geophysical log data from 28 wells to further develop and extend methods and calibrations of well-log recognition of sequences and facies variations. This study reveals the northeastward migration of depocenters from the Cenomanian (ca. 98 Ma) through the earliest Danian (ca. 64 Ma) and documents five primary phases of paleodeltaic evolution in response to long-term eustatic changes, variations in sediment supply, the location of two long-lived fluvial axes, and thermoflexural basement subsidence: (1) Cenomanian-early Turonian deltaic facies exhibit marine and nonmarine facies and are concentrated in the central coastal plain; (2) high sediment rates, low sea level, and high accommodation rates in the northern coastal plain resulted in thick, marginal to nonmarine mixed-influenced deltaic facies during the Turonign-Coniacian; (3) comparatively low sediment rates and high long-term sea level in the Santonian resulted in a sediment-starved margin with low deltaic influence; (4) well-developed Campanian deltaic sequences expand to the north and exhibit wave reworking and longshore transport of sands, and (5) low sedimentation rates and high long-term sea level during the Maastrichtian resulted in the deposition of a sediment-starved glauconitic shelf. Our study illustrates the widely known variability of mixed-influence deltaic systems, but also documents the relative stability of deltaic facies systems on the 106-107 yr scale, with long periods of cyclically repeating systems tracts controlled by eustasy. Results from the Late Cretaceous further show that although eustasy provides the template for sequences globally, regional tectonics (rates of subsidence and accommodation), changes in sediment supply, proximity to sediment input, and flexural subsidence from depocenter loading determines the regional to local preservation and facies expression of sequences. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).
Journal of Sedimentary Research↗
Seasonal variations in modern speleothem calcite growth in Central Texas, U.S.A
Variations in growth rates of speleothem calcite have been hypothesized to reflect changes in a range of paleoenvironmental variables, including atmospheric temperature and precipitation, drip-water composition, and the rate of soil CO2 delivery to the subsurface. To test these hypotheses, we quantified growth rates of modern speleothem calcite on artificial substrates and monitored concurrent environmental conditions in three caves across the Edwards Plateau in central Texas. Within each of two caves, different drip sites exhibit similar annual cycles in calcite growth rates, even though there are large differences between the mean growth rates at the sites. The growth-rate cycles inversely correlate to seasonal changes in regional air temperature outside the caves, with near-zero growth rates during the warmest summer months, and peak growth rates in fall through spring. Drip sites from caves 130 km apart exhibit similar temporal patterns in calcite growth rate, indicating a controlling mechanism on at least this distance. The seasonal variations in calcite growth rate can be accounted for by a primary control by regional temperature effects on ventilation of cave-air CO2 concentrations and/or drip-water CO2 contents. In contrast, site-to-site differences in the magnitude of calcite growth rates within an individual cave appear to be controlled principally by differences in drip rate. A secondary control by drip rate on the growth rate temporal variations is suggested by interannual variations. No calcite growth was observed in the third cave, which has relatively high values of and small seasonal changes in cave-air CO2. These results indicate that growth-rate variations in ancient speleothems may serve as a paleoenvironmental proxy with seasonal resolution. By applying this approach of monitoring the modern system, speleothem growth rate and geochemical proxies for paleoenviromnental change may be evaluated and calibrated. Copyright ?? 2007, SEPM (Society for Sedimentary Geology).
Journal of Sedimentary Research↗
Coarse-clast ridge complexes of the Caribbean: A preliminary basis for distinguishing tsunami and storm-wave origins
Coastal gravel-ridge complexes deposited on islands in the Caribbean Sea are recorders of past extreme-wave events that could be associated with either tsunamis or hurricanes. The ridge complexes of Bonaire, Jamaica, Puerto Rico (Isla de Mona), and Guadeloupe consist of polymodal clasts ranging in size from sand to coarse boulders that are derived from the adjacent coral reefs or subjacent rock platforms. Ridge-complex morphologies and crest elevations are largely controlled by availability of sediments, clast sizes, and heights of wave runup. The ridge complexes are internally organized, display textural sorting and a broad range of ages including historical events. Some display seaward-dipping beds and ridge-and-swale topography, and some terminate in fans or steep avalanche slopes. Together, the morphologic, sedimentologic, lithostratigraphic, and chronostratigraphic evidence indicates that shore-parallet ridge complexes composed of gravel and sand that are tens of meters wide and several meters thick are primarily storm-constructed features that have accumulated for a few centuries or millennia as a result of multiple high-frequency intense-wave events. They are not entirely the result of one or a few tsunamis as recently reported. Tsunami deposition may account for some of the lateral ridge-complex accretion or boulder fields and isolated blocks that are associated with the ridge complexes. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).
Journal of Sedimentary Research↗