USGS Science⌕ Search

SEARCH · USGS Science

Results for “Reviews of Geophysics and Space Physics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

14 recordsLinked to original sources
USGS2010

Physical oceanography of continental shelves

Knowledge of the physical oceanography of continental shelves has increased tremendously in recent years, primarily as a result of new current and hydrographic measurements made in locations where no comparable measurements existed previously. In general, observations from geographically distinct continental shelves have shown that the nature of the flow may vary considerably from region to region. Although some characteristics, such as the response of currents to wind forcing, are common to many shelves, the relative importance of various physical processes in influencing the shelf flow field frequently is different. In the last several years, the scientific literature on shelf studies has expanded rapidly, with that for separate regions, to some extent, developing independently because of the variable role played by different physical effects.

Reviews of Geophysics and Space Physics↗
USGS2010

Water quality.

Significant contributions in the broad area of water quality over the quadrennium 1975-78 are highlighted. This summare is concerned primarily with physical and chemical aspects of water quality. The diversity of subject areas within the topic heading and the large volume of published research results necessitated the selection of representative contributions. Over 400 references are cited which are believed to be indicative of general trends in research and of the more important developments during this period.- from Authors

Reviews of Geophysics and Space Physics↗
USGS2010

Lunar basin formation and highland stratigraphy

Multiring impact basins, formed after solidification of the lunar crust, account for most or all premare regional deposits and structures expressed in the lunar landscape and for major topographic and gravity variations. A fresh basin has two or more concentric mountain rings, a lineated ejecta blanket, and secondary impact craters. Crackled material on the floor may be impact melt. The ejecta blanket was emplaced at least partly as a ground‐hugging flow and was probably hot. A suggested model of basin formation is that the center lifts up and the rings form by inward collapse during evisceration. The resulting basin is shallow and has a central uplift of the mantle. This results in a central gravity high and a ring low. Later flooding by mare basalt has since modified most near side basins. Highland deposits of plains, furrowed and pitted terrain, and various hills, domes, and craters that were interpreted before the Apollo missions as being volcanic can now be interpreted as being basin related. A province map of the whole moon shows that the relatively young Orientale and Imbrium basins imprinted and rejuvenated much of the moon's surface; older basins must have also. The most primitive cratered surface remaining is mostly on the far side, distant from Imbrium and Orientale and other large relatively young basins. All five lunar landings in the highlands sampled stratigraphic units probably related to basins. Several nearly obliterated basins have been discovered recently, including a deep one on the far side that is as wide as the moon's radius. The presence of these ancient basins suggests that the surface is effectively saturated by basins and that many others were completely destroyed by later impacts. Basin impacts may have churned the lunar crust to large depths.

Reviews of Geophysics and Space Physics↗
USGS2010

The geology of the terrestrial planets.

During the last four years our knowledge of the geology of the terrestrial planets has advanced rapidly. The advances are particularly noticeable for Venus and Mars. Improved understanding of Venus has come largely from the Pioneer Venus mission. The period was also one of almost continuous data gathering for Mars as the Viking orbiters and landers, emplaced at the planet in 1976, continued to function. The last orbiter ran out of attitude- control gas in August of 1980 by which time about 55 000 pictures and vast amounts of infrared data had been collected. One lander continues to function and is expected to do so for several years. Only modest advances were made in the cases of Moon and Mercury, however, for little new data was acquired. -from Author

Reviews of Geophysics and Space Physics↗
USGS2010

Main field and recent secular variation.

As Cain (1979) indicated might happen in the last IUGG quadrennial report, added resources were made available during the past few years and a real impulse was added to the geomagnetic work in the US by the launching of the MAGSAT Satellite. This new effort paid off in terms of new charts, additional long wavelength studies, and external source studies. As before, however, the future funding for new starts in geomagnetism does not look bright at the present time. A single MAGSAT in orbit a little more than seven months did wonders for main field (M.F.) charting, but did little or nothing for secular variation (S.V.) charting. It would take a number of repeated MAGSATS to help the S.V. picture. Meanwhile, the world magnetic observatory net and surface repeat stations remain as the main source of S.V. data. -from Author

Reviews of Geophysics and Space Physics↗
USGS2010

Ground water: a review.

There is growing documentation that a significant portion of the Nation's fresh ground water in the densely populated areas of the USA is contaminated. Because of the slow rates of ground-water movement, ground water once contaminated will remain so for decades, often longer. Cleanup of contaminated ground water is almost always expensive and often technically unfeasible; the expense is often prohibitive. -from Author

Reviews of Geophysics and Space Physics↗
USGS2010

Rheology of the lithosphere

During the quadrennial term 1979–1982, major advances have been made in our knowledge of the rheology of the oceanic lithosphere by the skillful combination of experimental and theoretical rock mechanics, seismology and marine geophysics in increasingly sophisticated models for the flexure of the oceanic lithosphere at seamounts and island chains, along transform faults, and at subduction zones. The relative simplicity of plate bending geometry, thermal history, and mineralogical and chemical compositions of the oceanic plates in these settings make the geophysical observations very powerful constraints on the in situ rheology of the oceanic lithosphere. In the first part of this paper, I review the laboratory work on materials appropriate to the oceanic lithosphere with emphasis on contributions during the quadrennial period and the need for future work. The important results of flexure models incorporating realistic material properties are then summarized.

Reviews of Geophysics and Space Physics↗
USGS2008

Magnetic monitoring of earth and space

For centuries, navigators of the world’s oceans have been familiar with an effect of Earth’s magnetic field: It imparts a directional preference to the needle of a compass. Although in some settings magnetic orientation remains important, the modern science of geomagnetismhas emerged from its romantic nautical origins and developed into a subject of great depth and diversity. The geomagnetic field is used to explore the dynamics of Earth’s interior and its surrounding space environment, and geomagnetic data are used for geophysical mapping, mineral exploration, risk mitigation, and other practical applications. A global distribution of ground-based magnetic observatories supports those pursuits by providing accurate records of the magnetic-field direction and intensity at fixed locations and over long periods of time. Magnetic observatories were first established in the early 19th century in response to the influence of Alexander von Humboldt and Carl Friedrich Gauss. Since then, magnetic measurement has advanced significantly, progressing from simple visual readings of magnetic survey instruments to include automatic photographic measurement and modern electronic acquisition. To satisfy the needs of the scientific community, observatories are being upgraded to collect data that meet ever more stringent standards, to achieve higher acquisition frequencies, and to disseminate data in real time. To appreciate why data from magnetic observatories can be used for so many purposes, one needs only to recall that the geomagnetic field is a continuum, connecting the different parts of Earth to each other and to nearby space. Beneath our feet and above our heads, electric currents generate magnetic fields that contribute to the totality of the geomagnetic field measured at an observatory on Earth’s surface. The many physical processes that operate in each geophysical domain give rise to a complicated field that exhibits a wide variety of time-dependent behavior. In this article I review the status of the global community of magnetic observatories, show how Earth and space can be monitored for purposes of scientific understanding and practical application, and highlight the role played by magnetic observatories in the history of geomagnetism research.

Physics Today↗
USGS2012

Chapter two: Phenomenology of tsunamis II: Scaling, event statistics, and inter-event triggering

Observations related to tsunami catalogs are reviewed and described in a phenomenological framework. An examination of scaling relationships between earthquake size (as expressed by scalar seismic moment and mean slip) and tsunami size (as expressed by mean and maximum local run-up and maximum far-field amplitude) indicates that scaling is significant at the 95% confidence level, although there is uncertainty in how well earthquake size can predict tsunami size (R 2 ~ 0.4-0.6). In examining tsunami event statistics, current methods used to estimate the size distribution of earthquakes and landslides and the inter-event time distribution of earthquakes are first reviewed. These methods are adapted to estimate the size and inter-event distribution of tsunamis at a particular recording station. Using a modified Pareto size distribution, the best-fit power-law exponents of tsunamis recorded at nine Pacific tide-gauge stations exhibit marked variation, in contrast to the approximately constant power-law exponent for inter-plate thrust earthquakes. With regard to the inter-event time distribution, significant temporal clustering of tsunami sources is demonstrated. For tsunami sources occurring in close proximity to other sources in both space and time, a physical triggering mechanism, such as static stress transfer, is a likely cause for the anomalous clustering. Mechanisms of earthquake-to-earthquake and earthquake-to-landslide triggering are reviewed. Finally, a modification of statistical branching models developed for earthquake triggering is introduced to describe triggering among tsunami sources.

Advances in Geophysics↗
USGS2007

Crust and lithospheric structure – Global crustal structure

The Earth’s crust has played an important role in all aspects of this planet’s evolution. This chapter presents a review of our current understanding of the physical properties of the crust on a global basis. This understanding comes from extensive seismic measurements using many techniques, as well as nonseismic geophysics, including gravity, magnetic, geoelectric, and heat flow measurements. Seismic measurements include those that employ active (man-made) sources and those that use passive (naturally occurring) sources. Deep seismic reflection profiles provide a seismic image of the crust in twodimensions with a high (50–100m) resolution. Local earthquake tomography can provide three-dimensional (3-D) seismic images at moderate (500–1000m) resolution and higher, depending on the number and spacing of seismographs. Nonseismic methods provide estimates of crustal density, magnetic properties, conductivity and geotherms (temperature vs depth). The crust in deep ocean basins is 6–7km thick and has a relatively uniform seismic velocity structure, but there are numerous oceanic regions with anomalous crustal structure, including mid-ocean ridges, trenches, volcanic islands, and oceanic plateaux. Ocean–continent passive margins are also highly variable in structure, and may be classified as volcanic versus nonvolcanic margins. Continental crust ranges in thickness from 16 to 80km, and has a highly variable seismic velocity and density structure. The proportions of continental crust, by area, are 69% shield and platform (cratons), 15% old and young orogens, 9% extended (stretched) crust, 6 % magmatic arc, and 1% rifts. The weighted mean continental crustal thickness and average crustal velocity are 41km (SD 6.2km) and 6.45kms−1 (SD 0.21kms−1), respectively. A global geographic distribution of seismic data has made it possible to create global crustal models with cell sizes as small as 2°×2°. These models provide a complete description of seismic velocities and density within the crust and uppermost mantle, including, where present, ice, water, and sedimentary layers and the crystalline crust (parameterized in three layers, upper, middle and lower crust), and sub-Moho properties. The crust is the most intensely studied region of the Earth’s interior and consequently is the best understood in terms of its structure, composition, and evolution. © 2007 Elsevier B.V. All rights reserved.

Book chapter↗
USGS2007

Thermal Methods for Investigating Ground-Water Recharge

Recharge of aquifers within arid and semiarid environments is defined as the downward flux of water across the regional water table. The introduction of recharging water at the land surface can occur at discreet locations, such as in stream channels, or be distributed over the landscape, such as across broad interarroyo areas within an alluvial ground-water basin. The occurrence of recharge at discreet locations is referred to as focused recharge, whereas the occurrence of recharge over broad regions is referred to as diffuse recharge. The primary interest of this appendix is focused recharge, but regardless of the type of recharge, estimation of downward fluxes is essential to its quantification. Like chemical tracers, heat can come from natural sources or be intentionally introduced to infer transport properties and aquifer recharge. The admission and redistribution of heat from natural processes such as insolation, infiltration, and geothermal activity can be used to quantify subsurface flow regimes. Heat is well suited as a ground-water tracer because it provides a naturally present dynamic signal and is relatively harmless over a useful range of induced perturbations. Thermal methods have proven valuable for recharge investigations for several reasons. First, theoretical descriptions of coupled water-and-heat transport are available for the hydrologic processes most often encountered in practice. These include land-surface mechanisms such as radiant heating from the sun, radiant cooling into space, and evapotranspiration, in addition to the advective and conductive mechanisms that usually dominate at depth. Second, temperature is theoretically well defined and readily measured. Third, thermal methods for depths ranging from the land surface to depths of hundreds of meters are based on similar physical principles. Fourth, numerical codes for simulating heat and water transport have become increasingly reliable and widely available. Direct measurement of water flux in the subsurface is difficult, prompting investigators to pursue indirect methods. Geophysical approaches that exploit the coupled relation between heat and water transport provide an attractive class of methods that have become widely used in investigations of recharge. This appendix reviews the application of heat to the problem of recharge estimation. Its objective is to provide a fairly complete account of the theoretical underpinnings together with a comprehensive review of thermal methods in practice. Investigators began using subsurface temperatures to delineate recharge areas and infer directions of ground-water flow around the turn of the 20th century. During the 1960s, analytical and numerical solutions for simplified heat- and fluid-flow problems became available. These early solutions, though one-dimensional and otherwise restricted, provided a strong impetus for applying thermal methods to problems of liquid and vapor movement in systems ranging from soils to geothermal reservoirs. Today?s combination of fast processors, massive data-storage units, and efficient matrix techniques provide numerical solutions to complex, three-dimensional transport problems. These approaches allow researchers to take advantage of the considerable information content routinely achievable in high-accuracy temperature work.

Professional Paper↗
USGS2012

Earthquake geodesy and hazard monitoring

Catastrophic events such as major earthquakes and volcanic eruptions result when the earth's crust fails in response to accumulated deformation. The accumulation of deformation results from ongoing processes such as aseismic deformation of subcrustal rock associated with relative plate motions, or the ascent of magma through a volcanic plumbing system. Geodetic measurements document the crustal deformation leading to these failures and the deformation resulting from them, providing unique insight into the physical processes involved. By virtue of the space and time domains of ground deformation detected with geodetic measurements, geodesy is a useful tool in monitoring active tectonic and volcanic regimes. For a wide range of natural events including earthquakes, aseismic fault motions, and volcanic events, geodetic measurements constrain physical models of the processes that cause such events. Because these geodetic studies probe the underlying processes leading to and culminating in catastrophic natural events, many such studies are directly applicable to earthquake and volcano hazard assessment.

California↗
USGS2020

Volcanological applications of unoccupied aircraft systems (UAS): Developments, strategies, and future challenges

Unoccupied aircraft systems (UAS) are developing into fundamental tools for tackling the grand challenges in volcanology; here, we review the systems used and their diverse applications. UAS can typically provide image and topographic data at two orders of magnitude better spatial resolution than space-based remote sensing, and close-range observations at temporal resolutions down to those of video frame rates. Responsive deployments facilitate dense time-series measurements, unique opportunities for geophysical surveys, sample collection from hostile environments such as volcanic plumes and crater lakes, and emergency deployment of ground-based sensors (and robots) into hazardous regions. UAS have already been used to support hazard management and decision-makers during eruptive crises. As technologies advance, increased system capabilities, autonomy and availability, supported by more diverse and lighter-weight sensors, will offer unparalleled potential for hazard monitoring. UAS are expected to provide opportunities for pivotal advances in our understanding of complex physical and chemical volcanic processes.

Volcanica↗
USGS1985

Remote sensing; a geophysical perspective

In this review of developments in the field of remote sensing from a geophysical perspective, the subject is limited to the electromagnetic spectrum from 0.4 mu m to 25 cm. Three broad energy categories are covered: solar reflected, thermal infrared, and microwave.The reflected solar region has been the most intensely studied. Photointerpretation of images from individual spectral bands or from color composites remains the most widely used method of analysis. New instrumentation and digital processing, based on analysis of laboratory and field spectra, provide significant advances that are beginning to be applied to resource exploration. Color compositing techniques have been effectively used to detect the characteristic spectral reflectance features of iron oxides and hydroxyl-bearing materials in satellite multispectral data for mapping areas of hydrothermal alteration. Airborne spectrometers can now detect individual spectral features of many minerals which are diagnostic of different stages of hydrothermal alteration. Evolution was from discrimination, based on empirical experience, to mineralogic identification and leading to quantification. Current developments also indicate new, promising extensions to vegetated terrains.Advances in thermal infrared studies are due to development of thermal models that permit mapping of physical property variations and to detection of spectral differences that provide important compositional information. Analysis techniques are still in their infancy, and thermal satellite data remain appropriate only for regional investigations.Microwave data have been acquired mainly with radar systems, which can provide very high resolution from space, but use of textural and slope information has had limited application. Long-wavelength radiation has been shown to penetrate dry materials, and this may be applicable in extremely arid regions.

Geophysics↗