The geographical distribution of the population of the United States
No abstract available.
Publications of the American Statistical Associati↗
SEARCH · USGS Science
Results for “Publications of the American Statistical Association”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Handbook of acute toxicity of chemicals to fish and aquatic invertebrates : summaries of toxicity tests conducted at Columbia National Fisheries Research Laboratory, 1965-78
Acute toxicity is a major subject of research at Columbia National Fisheries Research Laboratory for evaluating the impact of toxic chemicals on fishery resources. The Laboratory has played a leading role in developing research technology for toxicity testing and data interpretation. In 1965-78, more than 400 chemicals were tested against a variety of invertebrates and fish species representative of both cold- and warm-water climates. The use of acute toxicity tests for assessing the potential hazard of chemical contaminants to aquatic organisms is well documented (Boyd 1957; Henderson et al. 1960; Sanders and Cope 1966; Macek and McAllister 1970). Static acute toxicity tests provide rapid and (within limits) reproducible concentration-response curves for estimating toxic effects of chemicals on aquatic organisms. These tests provide a database for determining relative toxicity of a large number of chemicals to a variety of species and for estimating acute effects of chemical spills on natural aquatic systems; they also assist in determining priority and design of additional toxicity studies. Acute toxicity tests usually provide estimates of the exposure concentration causing 50% mortality (LC50) to test organisms during a specified period of time. For certain invertebrates, the effective concentration is based on immobilization, or some other identifiable endpoint, rather than on lethality. The application of the LC50 has gained acceptance among toxicologists and is generally the most highly rated test for assessing potential adverse effects of chemical contaminants to aquatic life (Brungs and Mount 1978; American Institute for Biological Sciences 1978 a ). The literature contains numerous papers dealing with the acute toxicity of chemicals to freshwater organisms. However, there is a tremendous need for a concise compendium of toxicity data covering a large variety of chemicals and test species. This Handbook is a compilation of a large volume of acute toxicity data from the Columbia Laboratory and its field laboratories. It presents definitive acute toxicity data on 271 chemicals tested against a variety of freshwater invertebrates and fishes. The chemicals represent all major groups of pesticides, as well as numerous industrial chemicals. This compilation should serve as a useful database for the many agencies and organizations dealing with research and management programs concerned with the impact of chemicals on aquatic resources. The Columbia Laboratory has played a major role in developing currently used standard methodology for static acute toxicity testing. The use of standardized methodology greatly reduces variation in results. The data presented here have been carefully scrutinized to eliminate tests that failed to follow acceptable procedures. Handling of test organisms and procedures for static toxicity tests followed those described by Lennon and Walker (1964) and Macek and McAllister (1970), and conform well with those recommended by Brauhn and Schoettger (1975) and the Committee on Methods for Toxicity Tests with Aquatic Organisms (1975). The species of fish and invertebrates that were tested are listed in phylogenetic order in Tables 1 and 2. Fish were obtained from Federal and State hatcheries as either eggs or fry. Original stocks of invertebrates were collected and cultured from wild populations with no known source of contamination; these populations were replenished regularly. The invertebrates were cultured in the Laboratory by methods similar to those described by Sanders and Cope (1966). Test chemicals usually consisted of technical or analytical grade samples of known purity. Formulations of the chemicals were also tested when available. When purity of test chemicals was known, all calculated concentrations were based on percent active ingredients. Stock solutions were prepared immediately before each test, with commercial grade acetone as the carrier solvent. Occasionally, ethanol or dimethyl-formamide was substituted. Solvent concentrations did not exceed 0.5 mL/L in final dilution water. Test water (dilution water) was reconstituted from deionized water of at least 10 6 ohms resistivity by the addition of appropriate reagent grade chemicals (Marking 1969). Water was buffered to maintain a pH of 7.2 to 7.5, an alkalinity of 30 to 35 mg/L, and a hardness of 40 to 50 mg/L as CaCO 3 . Test water was mixed thoroughly and aerated before transfer into test chambers. Fish were acclimated to dilution water by gradually changing the water in acclimated tanks from 100% well water to 100% reconstituted water over a 1- to 3-day period at the desired testing temperature. Invertebrates were acclimated from well water to dilution water over a 4- to 6-h period. Toxicity tests were conducted under static conditions without aeration, and the organisms were not fed during acclimation or testing. Temperature of test solutions was maintained within ± 1°C of that required for a given test. Toxicity tests with fish were conducted in 18.9-liter (5-gal) wide-mouthed jars containing 15 liters of test solution. Fingerling fish weighing 0.2 to 1.5 g were tested at each concentration. Caution was taken not to exceed 0.8 g of test organisms per liter of solution. Duplicate test chambers were used to accommodate larger fish. Test chambers varied in size for invertebrates, depending on the species used; volume of test solution ranged from 0.25 to 4 liters. At least 10 organisms were exposed to each concentration for all definitive tests. At least six concentrations were used per toxicity test. The tests began upon initial exposure to the toxicant and continued for 96 h. Immobilization tests with invertebrates were conducted for only 48 h. The number of dead or affected organisms in each test chamber were recorded and the dead organisms were removed every 24 h; general observations on the condition of test organisms were also recorded at these times. Toxicity data were analyzed by a statistical method described by Litchfield and Wilcoxon (1949) to determine LC50 (theoretical estimate of the concentration lethal to 50% of the test animals) and 95% confidence intervals. This method is recommended by the American Public Health Association (1971) and by Sprague (1969) for determining median lethal concentrations. The procedure is easily modified for computing a single LC50 when replicate tests are performed.
Resource Publication↗
Occurrence and temporal variability of methyl tert -butyl ether (MTBE) and other volatile organic compounds in select sources of drinking water : results of the focused survey
The large-scale use of the gasoline oxygenate methyl tert -butyl ether (MTBE), and its high solubility, low soil adsorption, and low biodegradability, has resulted in its detection in ground water and surface water in many places throughout the United States. Studies by numerous researchers, as well as many State and local environmental agencies, have discovered high levels of MTBE in soils and ground water at leaking underground gasoline-storage-tank sites and frequent occurrence of low to intermediate levels of MTBE in reservoirs used for both public water supply and recreational boating. In response to these findings, the American Water Works Association Research Foundation sponsored an investigation of MTBE and other volatile organic compounds (VOCs) in the Nation's sources of drinking water. The goal of the investigation was to provide additional information on the frequency of occurrence, concentration, and temporal variability of MTBE and other VOCs in source water used by community water systems (CWSs). The investigation was completed in two stages: (1) reviews of available literature and (2) the collection of new data. Two surveys were associated with the collection of new data. The first, termed the Random Survey, employed a statistically stratified design for sampling source water from 954 randomly selected CWSs. The second, which is the focus of this report, is termed the Focused Survey, which included samples collected from 134 CWS source waters, including ground water, reservoirs, lakes, rivers, and streams, that were suspected or known to contain MTBE. The general intent of the Focused Survey was to compare results with the Random Survey and provide an improved understanding of the occurrence, concentration, temporal variability, and anthropogenic factors associated with frequently detected VOCs. Each sample collected was analyzed for 66 VOCs, including MTBE and three other ether gasoline oxygenates (hereafter termed gasoline oxygenates). As part of the Focused Survey, 451 source-water samples and 744 field quality-control (QC) samples were collected from 78 ground-water, 39 reservoir and (or) lake, and 17 river and (or) stream source waters at fixed intervals for a period of 1 year. Using a common assessment level of 0.2 μg/L (micrograms per liter) (2.0 μg/L for methyl ethyl ketone), 37 of the 66 VOCs analyzed were detected in both surveys. However, VOCs, especially MTBE and other gasoline oxygenates, were detected more frequently in the Focused Survey than in the Random Survey. MTBE was detected in 55.5 percent of the CWSs sampled in the Focused Survey and in 8.7 percent of those sampled in the Random Survey. Little difference in occurrence, however, was observed for trihalomethanes (THMs), which were detected in 16.4 and 14.8 percent of Focused Survey and Random Survey CWSs, respectively. This may indicate a pervasive occurrence of THMs in several source-water types, regardless of CWS size or geographic location. Using data at or above the method detection limit to assess temporal variability and anthropogenic factors associated with frequent detection of select VOCs, concentrations in the Focused Survey in ground-water, reservoir, and river source waters were typically less than 1 μg/L. Also, at a 95-percent confidence interval, no statistically significant differences were observed in comparing concentrations in the first and second ground-water sample. A weak seasonal pattern was observed in samples collected from reservoirs and lakes where gasoline oxygenates and other gasoline compounds were detected more frequently during spring and summer, presumedly a result of increased use of motorized watercraft during these seasons. In contrast, seasonal patterns were not observed in samples collected from rivers and streams. The lack of seasonal differences in river and stream source waters sampled may indicate a common and continuous source of contamination. The most frequently detected VOC (MTBE) and the two most frequently occurring subgroups of VOCs (gasoline oxygenates and THMs) detected in CWS source waters were further characterized to evaluate some anthropogenic factors that may better explain their frequent occurrence. Gasoline oxygenates were detected in 73.9 percent of all CWSs sampled. The concentration of gasoline oxygenates was slightly correlated with watercraft use on reservoirs inside MTBE high-use areas (r2=0.3783) but not outside of these areas (r2=0.0242). In general, the concentration of gasoline oxygenates increased as watercraft use increased. THMs were detected in 47.8 percent of the CWSs supplied by surface water. The frequent occurrence of THMs in reservoir source waters was determined to be an artifact of disinfection and the recycling of chlorinated water to these reservoirs. All CWSs with frequent occurrence of THMs served by a reservoir indicated that chlorine was added to waters for various reasons and that the chlorinated water was then released back to, or upstream of, the reservoir or lake that was sampled.
Water-Resources Investigations Report↗
Outcomes of control and monitoring of a widespread riparian invader (Tamarix spp.): A comparison of synthesis approaches
Effective ecological restoration requires empirical assessment to determine outcomes of projects, but conclusions regarding the effects of restoration treatments on the whole ecosystem remain rare. Control of invasive shrubs and trees in the genus Tamarix and associated riparian restoration in the American Southwest has been of interest to scientists and resource managers for decades; dozens of studies have reported highly variable outcomes of Tamarix control efforts, as measured by a range of response variables, temporal and spatial scales and monitoring strategies. We conducted a literature search and review, meta-analysis and vote count (comparison of numerical outcomes lacking reported variances and/or sample sizes) on published papers that quantitatively measured a variety of responses to control of Tamarix . From 96 publications obtained through a global search on terms related to Tamarix control, we found 52 publications suitable for a meta-analysis (n = 777 comparisons) and 63 publications suitable for two vote counts (n = 1,460 comparisons total; 622 comparisons reported as statistically significant) of response to Tamarix control. We estimated responses to control by treatment type (e.g. cut-stump treatment, burning, biocontrol) and ecosystem component (e.g. vegetation, fauna, fluvial processes). Finally, we compared results of the various synthesis methods to determine whether the increasingly stringent requirements for inclusion led to biased outcomes. Vegetation metrics, especially measures of Tamarix response, were the most commonly assessed. Ecosystem components other than vegetation, such as fauna, soils and hydrogeomorphic dynamics, were under-represented. The meta-analysis showed significantly positive responses by vegetation overall to biocontrol, herbicide and cut-stump treatments. This was primarily due to reduction of Tamarix cover; impacts on replacement vegetation were highly variable. We found concordance amongst our varied synthesis approaches, indicating that increased granularity from stricter quantitative techniques does not come at the cost of a biased sample. Overall, our results indicate that common control methods are generally effective for reducing Tamarix , but the indirect effects on other aspects of the ecosystem are variable and remain understudied. Given that this is a relatively well-studied invasive plant species, our results also illustrate the limitations of not only individual studies, but also of reviews for measuring the impact of invasive species control. We call on researchers to investigate the less commonly studied responses to Tamarix control and riparian restoration including the effects on fauna, soil and hydrogeomorphic characteristics.
NeoBiota↗
Contrasting water quality from paired domestic/public supply wells, central High Plains
Closely located domestic and public supply wells were sampled using identical sampling procedures to allow comparison of water quality associated with well type. Water samples from 15 pairs of wells with similar screened intervals completed in the central High Plains regional aquifer in parts of Kansas, Oklahoma, and Texas were analyzed for more than 200 water quality constituents. No statistically significant differences were observed between the concentrations of naturally-derived constituents (major ions, trace elements, and radon) in paired wells. However, differences in water quality between paired wells were observed for selected anthrepogenic compounds (pesticides and tritium), in that some public supply wells produced water that was more recently recharged and contained constituents derived from surface activities. The presence of recently recharged water and compounds indicative of anthrepogenic activities in some public supply wells was likely due to operational variations (pumping rate and pumping cycles), as demonstrated in a particle tracking simulation. Water containing surface-derived anthropogenic compounds from near the water table was more quickly drawn to high volume public supply wells (less than five years) than domestic wells (greater than 120 years) with small pumping rates. These findings indicate that water quality samples collected from different well types in the same area are not necessarily directly comparable. Sampling domestic wells provides the best broad-scale assessment of water quality in this aquifer setting because they are less susceptible to localized contamination from near the water table. However, sampiing public supply wells better represents the quality of the used resource because of the population served.
Kansas, Oklahoma, Texas↗
Statistical evaluation of variables affecting occurrence of hydrocarbons in aquifers used for public supply, California
The variables affecting the occurrence of hydrocarbons in aquifers used for public supply in California were assessed based on statistical evaluation of three large statewide datasets; gasoline oxygenates also were analyzed for comparison with hydrocarbons. Benzene is the most frequently detected (1.7%) compound among 17 hydrocarbons analyzed at generally low concentrations (median detected concentration 0.024 μg/l) in groundwater used for public supply in California; methyl tert-butyl ether (MTBE) is the most frequently detected (5.8%) compound among seven oxygenates analyzed (median detected concentration 0.1 μg/l). At aquifer depths used for public supply, hydrocarbons and MTBE rarely co-occur and are generally related to different variables; in shallower groundwater, co-occurrence is more frequent and there are similar relations to the density or proximity of potential sources. Benzene concentrations are most strongly correlated with reducing conditions, regardless of groundwater age and depth. Multiple lines of evidence indicate that benzene and other hydrocarbons detected in old, deep, and/or brackish groundwater result from geogenic sources of oil and gas. However, in recently recharged (since ~1950), generally shallower groundwater, higher concentrations and detection frequencies of benzene and hydrocarbons were associated with a greater proportion of commercial land use surrounding the well, likely reflecting effects of anthropogenic sources, particularly in combination with reducing conditions.
California↗
A multi-scale soil moisture monitoring strategy for California: Design and validation
A multi‐scale soil moisture monitoring strategy for California was designed to inform water resource management. The proposed workflow classifies soil moisture response units (SMRUs) using publicly available datasets that represent soil, vegetation, climate, and hydrology variables, which control soil water storage. The SMRUs were classified, using principal component analysis and unsupervised K‐means clustering within a geographic information system, and validated, using summary statistics derived from measured soil moisture time series. Validation stations, located in the Sierra Nevada, include transect of sites that cross the rain‐to‐snow transition and a cluster of sites located at similar elevations in a snow‐dominated watershed. The SMRUs capture unique responses to varying climate conditions characterized by statistical measures of central tendency, dispersion, and extremes. A topographic position index and landform classification is the final step in the workflow to guide the optimal placement of soil moisture sensors at the local‐scale. The proposed workflow is highly flexible and can be implemented over a range of spatial scales and input datasets can be customized. Our approach captures a range of soil moisture responses to climate across California and can be used to design and optimize soil moisture monitoring strategies to support runoff forecasts for water supply management or to assess landscape conditions for forest and rangeland management.
California↗
Using Christmas Bird Count data in analysis of population change
The scientific credibility of Christmas Bird Count (CBC) results depend on the development and implementation of appropriate methods of statistical analysis. The key to any successful analysis of CBC data is to begin with a careful review of how the limitations of the data are likely to influence the results of the analysis, then to choose methods of analysis that accommodate as much as possible the limitations of the survey. For our analyses of CBC data, we develop a flexible model for effort adjustment and use information from the data to guide the selection of the best model. We include geographic structuring to accommodate the regional variation in number of samples, use a model that allows for overdispersed poisson data appropriate for counts, and employ empirical Bayes procedures to accommodate differences in quality of information in regional summaries. This generalized linear model approach is very flexible, and can be applied to a variety of studies focused on factors influencing wintering bird populations. In particular, the model can be easily modified to contain covariates, allowing for assessment of associations between CBC counts and winter weather, disturbance, and a variety of other environmental factors. These new survey analysis methods have added value in that they provide insights into changes in survey design that can enhance the value of the information. The CBC has been extremely successful as a tool for increasing public interest in birding and bird conservation. Use of the information for bird conservation creates new demands on quality of information, and it is important to maintain a dialogue between users of the information, information needs for the analyses, and survey coordinators and participants. Our work as survey analysts emphasizes the value and limitations of existing data, and provides some indications of what features of the survey could be modified to make the survey a more reliable source of bird population data. Surveys only remain useful if they adapt to current needs, while still maintaining consistency with historical goals.
American Birds↗
Pilot framework for fish habitat assessments across tidal and non tidal waters in the Patuxent River Basin
As part of the 2014 Chesapeake Bay Watershed Agreement, all Bay States and the District of Columbia have committed to improving the condition of the Bay, which includes a goal to achieve sustainable fisheries. One outcome under that broad goal is improved effectiveness of fish habitat conservation and preservation efforts. In support of that outcome, the U.S. Geological Survey Eastern Ecological Science Center (USGS-EESC) and the National Oceanic and Atmospheric Association’s National Centers for Coastal Ocean Science (NOAA-NCCOS) are actively developing datasets, methods, and analyses to conduct fish habitat assessments in the Chesapeake Bay watershed, guided by recommendations from a regional stakeholder workshop held by the Chesapeake Bay Program’s (CBP) Fish Habitat Action Team (FHAT) in 2018. The joint USGS and NOAA team has been collaborating on methods for conducting inland and estuarine assessments and exploring whether a seamless headwater to estuary assessment could be developed. The goals of this assessment are to benefit both State and Federal fisheries managers, help advance fisheries science, and provide beneficial information for the public. While past national and regional assessments (e.g. the National Fish Habitat Partnership National Assessment) treated inland and estuarine fish habitat conditions separately due to differences in environments, GIS data representation, and data availability, a seamless habitat assessment could be of value for a broad range of stakeholders as many fish species, several of which are invasive or under federal jurisdiction, use habitats across both inland and estuarine waters. This project developed a pilot framework, explored and tested methods necessary for a finer scale, seamless assessment across both inland and estuarine waters, and demonstrated its use. Although there was interest by the CBP FHAT for the generation of a Baywide fish habitat assessment that spanned tidal salt, tidal fresh, warm non-tidal and cold non-tidal waters, there are a myriad of implementation details and considerations around conducting a Baywide assessment across all four of these general habitat areas. Therefore, the practical need to conduct a tributary-specific pilot assessment arose. At the beginning of this pilot process, members of the FHAT were presented with a decision matrix to choose a study basin using factors such as data availability and tributary size. FHAT members chose the Patuxent River basin, which has been relatively well sampled and studied. Several spatial frameworks were considered before selection of an inclusive gridded framework for summary and analysis that represented inland drainage networks and landscape influences as well as estuarine bathymetry. A suite of landscape and in-water stressor variables were summarized into the framework and were largely generalized over time. In order to assess the viability of the framework, we chose to use species distribution modeling for each of the species to test the framework’s ability to predict habitat use of non-tidal resident, estuarine resident, and migratory species. Tessellated darter (Etheostoma olmstedi), American eel (Anguilla rostrata), and white perch (Morone americana) were chosen as illustrative fish species based on data availability, and differences in life history and habitat use. A nested modeling approach, which involved successive model runs at multiple scales (1000m, 100m, and 10m raster grids) was developed to examine differences in variable importance at different spatial scales and to enhance modeling efficiency. For white perch, a complementary modeling analysis was performed for variables available only in estuarine waters. For all testing, an ensemble modeling approach was conducted, using a suite of potential statistical techniques driven by model strength and variable predictive power. The statistical testing that we conducted was intended only to test the framework and modeling approach, and not to definitively predict all habitats where specific fish species might be present. The modeling we conducted to test the framework did have some limitations. For example, the spatial distribution of favorable habitat areas for white perch was likely influenced by the predominance of fish survey locations near the center channel of the river and the use of generalized in-water conditions. For all species, the use of juvenile and adult fish survey data limits the estimation of habitat use to those life stages. Despite such limitations of the data inputs and modeling approach, we found the framework could seamlessly predict fish habitat distribution across freshwater and tidal environments and integrate the influence of landscape stressors with local in-water factors. The developed framework presented to the Sustainable Fisheries Goal Implementation Team (GIT) and FHAT is informative and could potentially be used for other modeling applications in the Chesapeake Bay watershed and elsewhere. In particular the framework and modeling approach lend themselves to evaluating living resource distributions and underlying habitat conditions in shallow tidal waters and beyond, as recommended by the recent Comprehensive Evaluation of System Response (CESR) report from the Chesapeake Bay Program.
Maryland↗
Status and understanding of groundwater quality in the northern Sierra Nevada foothills domestic-supply aquifer study units, 2015–17—California GAMA Priority Basin Project
Groundwater quality in the northern Sierra Nevada foothills region of California was investigated as part of California State Water Resources Control Board (SWRCB) Groundwater Ambient Monitoring Assessment Priority Basin Project (GAMA-PBP). The region was divided into two study units: the Yuba-Bear watersheds (YBW) study unit and the American-Cosumnes-Mokelumne watersheds (ACMW) study unit. The GAMA-PBP made a spatially unbiased assessment of aquifer systems used for domestic drinking-water supply in the study region, which are predominantly composed of fractured, hard-rock aquifers of varying lithology. These assessments characterized the quality of raw groundwater to evaluate ambient conditions in the domestic-supply aquifer and not the quality of treated drinking water. The study included three components: (1) a status assessment , which characterized the quality of groundwater resources used for domestic drinking-water supply in the YBW and ACMW study units; (2) an understanding assessment , which evaluated natural and anthropogenic explanatory factors that could potentially affect groundwater quality in the study region; and (3) a comparative assessment between the groundwater resources used for domestic and public drinking-water supply in the study region. The status assessment was based on data collected by the GAMA-PBP from 74 sites in the YBW study unit during 2015–16 and 67 sites in the ACMW study unit from 2016 to 2017. To contextualize water-quality results, concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. The status assessment used a grid-based method to estimate proportions of groundwater resources with concentrations approaching or exceeding benchmark thresholds. This method provides spatially unbiased results and allows inter-comparability with similar groundwater-quality assessments. Inorganic constituents with health-based benchmarks were present at high relative concentration (RC), meaning they exceeded the benchmark threshold, in 5.4 and 10 percent of domestic-supply aquifer systems in the YBW and ACMW study units, respectively. Inorganic constituents with aesthetic-based benchmarks were detected at high-RCs in 20 and 28 percent of the YBW and ACMW study units, respectively. The inorganic constituents present at high RC were arsenic, barium, boron, molybdenum, strontium, nitrate, adjusted gross-alpha particle activity, chloride, total dissolved solids, specific conductance, iron, manganese, and hardness. Groundwater samples were tested for presence or absence of three microbial indicators (total coliform, Escherichia coli , and Enterococci ). At least one microbial indicator was present in 26 and 28 percent of the YBW and ACMW study units, respectively. At least one organic constituent was detected in 30 and 42 percent of the YBW and ACMW study units, respectively. Organic constituents were not present at high RC, but tetrachloroethene (PCE), trichloroethene (TCE), and toluene were detected in the YBW study unit at moderate RC (between the benchmark concentration and one-tenth of the benchmark concentration). Methyl tert -butyl ether (MTBE) and chloroform were present at low RC (less than one-tenth of the benchmark concentration) in the YBW and ACMW study units with detection frequencies greater than 10 percent. Perchlorate, a constituent of special interest, was detected in 31 and 41 percent of the YBW and ACMW study units, respectively, at either low or moderate RCs. Relations among select water-quality constituents and potential explanatory factors were evaluated using statistical and graphical approaches. Nitrate, microbial indicators, and perchlorate were all correlated to elevation-dependent variables relating to climate, land use, and recharge condition. Isotopic and dissolved noble-gas tracers indicated these water-quality constituents are associated with recharge conditions associated with irrigation during the summer dry-season, which is common in areas of rural-residential or agricultural land uses. Higher concentrations of iron and manganese were primarily associated with anoxic groundwater in aquifers of metasedimentary lithology. Increased hardness was primarily associated with anoxic groundwater in aquifers of mafic-ultramafic or metavolcanics lithologies at lower elevations in the study region in the Melones fault zone. Chloroform and MTBE were associated with shallow groundwater (wells depths less than 130 m) under oxic and anoxic redox conditions, respectively. The comparative assessment evaluated differences between the aquifer systems used for domestic- and public-supply in study region based on (1) well-construction characteristics, and (2) water quality. Analysis of over 60,000 well-completion reports in the study region showed that although domestic-supply wells span the deepest depth zones in regional aquifers, median depths for public-supply wells were significantly greater than those of domestic-supply wells in both study units. Water-quality data from more than 300 public-supply wells in the study region were assessed using a spatially weighted method for calculation aquifer-scale proportions and compared with the domestic-supply assessment results. Detections of inorganic constituents at high RC and detection frequencies for organic constituents were generally similar between the domestic- and public-supply aquifer systems in both study units, with a few notable exceptions in the ACMW study unit: nitrate was greater for the public- compared to domestic-supply aquifer system and both manganese, hardness, and MTBE were greater in the domestic- compared to public-supply aquifer system. These differences are likely related to contrasting land uses, aquifer lithologies, landscape positions, and depths characterizing domestic- and public-supply wells in the ACMW study unit. Overall, fewer samples from domestic-supply wells in the northern Sierra Nevada foothills exceeded health-based benchmarks compared to aesthetic-based benchmarks for groundwater quality. Exceedences of health-based benchmarks were primarily caused by nitrate and coliform bacteria, which were associated with recharge from diverted surface water used primarily for irrigation. Exceedences of aesthetic-based benchmarks were primarily caused by iron, managanese, and hardness, which were associated with geologic factors. Regional irrigation practices and aquifer lithology can affect groundwater quality in fractured-rock aquifers in the northern Sierra Nevada foothills used for domestic drinking-water supply.
California↗
Strategic Plan for the North American Breeding Bird Survey: 2006-2010
Executive Summary The mission of the North American Breeding Bird Survey (BBS) is to provide scientifically credible measures of the status and trends of North American bird populations at continental and regional scales to inform biologically sound conservation and management actions. Determining population trends, relative abundance, and distributions of North American avifauna is critical for identifying conservation priorities, determining appropriate conservation actions, and evaluating those actions. The BBS program, jointly coordinated by the U.S. Geological Survey and Environment Canada’s Canadian Wildlife Service, provides the U.S. and Canadian Federal governments, state and provincial agencies, other conservation practitioners, and the general public with science-based avian population trend estimates and other information for regional and national species’ population assessments. Despite the demonstrated value of the BBS for furthering avian conservation across North America, its importance is often underappreciated, and it is underfunded compared with many other government-supported programs that report on status of the environment. Today, BBS resources, adjusted for inflation, are below the amount allocated in the 1970s and are still only sufficient to support two biologists. Yet the number of routes, participants, data, and data requests has quadrupled. Data and information management and delivery requirements and security concerns, non-existent in 1966, impose further demands on BBS resources. In addition, the Mexican expansion of the BBS offers new hope for a truly continental approach to avian conservation, but also brings additional challenges. Meeting the goals of this plan will take cooperation among myriad stakeholders; yet, even with collaboration, most objectives of this plan will be unattainable if BBS program support is not increased. The BBS developed this strategic plan to help set priorities and identify resources required for the program to continue to meet the evolving needs of the conservation community for information on bird population change. By setting clear goals, strategies, and measures of success, this plan provides a cohesive framework and vision for maintenance and development of the BBS. The plan identifies two major goals for the BBS, with a number of strategies and objectives to achieve these goals. Over the next 5 years, progress made in addressing each long-term goal and its associated 5-year strategies and objectives will gage the plan’s success. Specific actions, projected outcomes, and measures of success related to accomplishing these are outlined in Table 1, with a timeline in Table 2. The two main goals for the program, with a summary of the strategies to achieve them, are: Goal 1: Collect scientifically credible measures of the status and trends of North American bird populations at continental and regional scales. The North American Breeding Bird Survey will continue to support North American natural resource conservation through the collection of scientifically credible measures of the status and trends of continental bird populations. While doing this, the BBS will work to improve the science behind the program to better meet its mission and the changing needs of the avian conservation community. In partnership with collaborators, the BBS will address detection probability bias and habitat bias, improve analytical methods, and more fully assess and account for observer quality. Moreover, the BBS will improve the quality and breadth of avian population data through strategic increases in route density and the establishment of a Mexican BBS program. Goal 2: Ensure BBS data and analytical results are widely available and easily accessible for use by the avian conservation and management communities. At the heart of the BBS lies a four-million-record database containing more than 40 years of data on more than 600 bird species. These data are of no value if not well maintained, appropriately analyzed, and widely and easily accessible. The USGS has greatly improved data management and accessibility in recent years. Trend estimates were first made available via the Internet in the mid-1990s, followed closely by the raw data with baseline metadata and standard operating procedures. Nevertheless, numerous enhancements to data management and the usability of BBS results will greatly improve the ability of the BBS to serve avian conservation goals. The BBS needs to ensure that BBS data and results presented on the web site use the best data-management practices and statistical methods, with adequate documentation for users to understand them and any differences between different trend estimates. Moreover, the BBS needs to increase communication with BBS partners and stakeholders to ensure that it continues to meet the avian population status and trends needs of the conservation community and to encourage the development of new products. Working with collaborators, the BBS will develop tools for integrating environmental parameters like habitat change into the analyses, and for integrating BBS data with other avian survey results. In addition, the BBS will continue to improve data and database management through the incorporation of additional data and data fields, such as georeferenced stop locations and more complete metadata for the raw data and results, thus enhancing the uses that can be made of the data.
Circular↗
Scope, setting, and purpose of the Colorado Front Range climate change vulnerability assessment for national forests
No abstract available.
Colorado↗