USGS Science⌕ Search

FIND YOUR NEXT DISCOVERY

Results for “Physical Review Letters”

Original records, connected by a shared subject.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

235 recordsLinked to original sources
USGS2026

Velocity-independent dry friction on mica: A realization of ideal Amontons-Coulomb friction

The Amontons-Coulomb friction law assumes that the frictional force between materials is independent of sliding velocity. However, as Coulomb noted, this is a rough approximation, and a second-order dependence of friction on the logarithm of sliding velocity is incorporated in a commonly used ‘rate- and state-dependent’ friction representation. Here we conduct shear experiments on mica, a layer-structured mineral, at temperatures ranging from 25 to 200ºC and under normal stress of 100 MPa. The friction coefficient clearly depends on the logarithmic sliding velocity at 25ºC, but rate sensitivity decreases with increasing temperature until at 200ºC, the friction coefficient is independent of sliding velocity. Our findings could initiate the development of velocity-independent frictional materials, realizing the ideal Amontons-Coulomb friction.

Physical Review Letters↗
USGS2025

High-pass corner frequency selection and review tool for use in ground-motion processing

Raw seismological waveform data contain noise from the instrument’s surroundings and the instrument itself that can dominate recordings at low and high frequencies. To use these data in ground‐motion modeling, the effects of noise on the signals must be reduced and the signals’ usable frequency range identified. We present automated procedures to efficiently reduce low‐frequency noise that are implemented in the software package gmprocess. These procedures check for, and as needed remove, low‐frequency artifacts in the displacement record using polynomial fits, which can be used in combination with existing signal‐to‐noise ratio (SNR)‐based corner‐frequency selection procedures. The automated selections are then efficiently verified and refined using a graphical user interface (GUI) that plots relevant ground‐motion time series and spectra and tracks modifications to signal processing parameters. We demonstrate these procedures using recordings from the 2020 M 5.1 Sparta, North Carolina, and the 2013 M 4.7 southern Ontario earthquakes. Data processed with the SNR‐only and polynomial criteria for these events contain displacement artifacts in 37% and 23% of processed traces, respectively. Records with remaining artifacts are corrected manually using the GUI. These processing steps illustrate the workflow for efficient data processing with quality control.

Seismological Research Letters↗
USGS2025

Deterministic physics-based earthquake sequence simulators match empirical ground-motion models and enable extrapolation to data poor regimes: Application to multifault multimechanism ruptures

We use the deterministic earthquake simulator RSQSim to generate complex sequences of ruptures on fault systems used for hazard assessment. We show that the source motions combined with a wave propagation code create surface ground motions that fall within the range of epistemic uncertainties for the Next Generation Attenuation‐West2 set of empirical models. We show the model is well calibrated where there are good data constraints, and has good correspondence in regions with fewer data constraints. We show magnitude, distance, and mechanism dependence all arising naturally from the same underlying friction. The deterministic physics‐based approach provides an opportunity for better understanding the physical origins of ground motions. For example, we find that reduced stress drops in shallow layers relative to constant stress drop with depth lead to peak ground velocities in the near field that better match empirical models. The simulators may also provide better extrapolations into regimes that are poorly empirically constrained by data because physics, rather than surface shaking data parameterizations, is underlying the extrapolations. Having shown the model is credible, we apply it to a problem where observations are lacking. We examine the case of crustal faults above a shallow subduction interface seen to break coseismically in simulations of the New Zealand fault system. These types of events were left out of consideration in the most recent New Zealand national seismic hazard model due to the modeling complexity and lack of observational data to constrain ground‐motion models (GMMs). Here, we show that in the model, by breaking up the coseismic crustal and interface rupturing fault motions into two separate subevents, and then recombining the resulting ground‐motion measures in a square‐root‐of‐sum‐of‐squares incoherent manner, we reproduce well the ground‐motion measures from the full event rupture. This provides a new method for extrapolating GMMs to more complex multifault ruptures.

Seismological Research Letters↗
USGS2025

Probing lower-crustal fault properties with frequency-dependent tidal tremor triggering

The way seismicity responds to periodic stress perturbations offers crucial insights into the processes that can trigger an earthquake. Laboratory and theoretical analyses have shown that the period of imposed forcing and source properties affect the sensitivity to triggering, but frequency-dependent triggering of tectonic faults is poorly understood. The rate of low-frequency earthquakes (LFEs) near Parkfield, California has been found to be strongly correlated with solid earth tides. Tidal forcing acts over multiple frequencies, and the sensitivity to tidal triggering of LFEs therefore provides a unique opportunity to probe the physics of earthquake triggering and underlying fault properties. Here, we find that the response of LFEs to solid earth tides at diurnal and semi-diurnal frequencies is highly variable but spatially coherent along the San Andreas Fault. Using rate-state friction modeling, we find that the variation of the amplitude of tidal modulation is mainly affected by the spatial variation of the background effective normal stress, whereas the spatially varied tidal modulation at diurnal and semi-diurnal frequencies is mainly affected by the fault frictional property. The spatial variations of the LFE response reveal a heterogeneous lower-crustal geologic structure and complex physical faulting processes below the rupture zone of eventual great earthquakes.

California↗
USGS2026

A review and synthesis of post-wildfire shifts in hydrologic processes and streamflow generation mechanisms

Critical water supply watersheds in the western United States (WUS) are impacted by wildfires, with potential negative effects on water quality and quantity. Scientific understanding is currently insufficient to deliver estimates of wildfire consequences for water quantity that are regionally accurate. Regional variability in the directionality and magnitude of post-wildfire shifts in streamflow generation fuels uncertainty in estimates of wildfire effects on water supply. In this work we provide a narrative review of wildfire effects on hydrologic processes and the resulting changes in streamflow generation mechanisms with a focus on the WUS, incorporating other global regions when pertinent. A conceptual model summary of wildfire effects on streamflow generation emphasizes: (1) precipitation seasonality, (2) synchrony of precipitation and potential evapotranspiration, (3) net shifts in interception, evaporation, and transpiration relative to total annual precipitation, (4) vegetation changes, including compensatory uptake and type conversion, (5) degree of overlap in rainfall rates and infiltration, (6) fire extent and severity, (7) burn scar positioning (e.g. in headwaters or proximal to watershed outlet), (8) scale-dependent groundwater leakage, (9) near-surface water storage reduction, and (10) soil to groundwater connectivity. Ongoing gaps and challenges include separating the influences of precipitation variability, water withdrawals, and post-fire land management; compound and overlapping disturbances; and lack of pre-fire data. Notable future opportunities include: harnessing ever-improving gridded and remotely sensed precipitation and fire-effects data; linking geophysical, isotopic tracer, and geochemical signatures to diagnose hydrologic changes; leveraging physically based and data-driven model advancements; and analyzing streamflow generation recovery trajectories across diverse watersheds.

western United States↗
USGS2025

Avian navigation: Comparing the olfactory navigational “map” and the infrasound direction-finding hypotheses to aeronautics

Animal navigation has long been a fascinating but bewildering subject. Humans and animals might well share similar navigational strategies because they developed within the same physical environments. A “map-and-compass” model has been proposed to explain the two-step avian navigational process, but the “map” step has remained elusive. Although scalar values from bicoordinate geomagnetic or atmospheric olfactory gradients have been considered foundational to the avian map, neither has proved convincing engendering decades of controversy. The olfactory map, and an alternative infrasound direction-finding (IDF) hypothesis, are discussed in this review. The olfactory map hypothesis currently requires extensive stable gradients of trace-odor ratios, but such gradients are highly unlikely within a turbulent and rapidly mixed lower atmosphere. The IDF hypothesis, on the other hand, postulates a two-step navigational model analogous to the maritime and aeronautical radio direction-finding technique. This review was also written to encourage further investigation, and direct testing, of the acoustic navigational process. The IDF hypothesis, at present, appears the better explanation of observed avian navigational behavior and accuracy within the atmosphere’s physical environment.

Journal of Comparative Physiology A↗
USGS2025

Preface to the focus section on earthquake-induced ground deformation

Ground failure due to earthquake-induced liquefaction, surface fault rupture, and landsliding has caused substantial damage in the past and continues to pose risks to critical infrastructure in the future. The consideration of ground failure is central to engineering analysis and design, ranging from site-specific engineering assessments of ground failure potential to broader regional-scale ground failure assessments of near-real-time earthquake impacts or longer-term portfolio risk. Uncertainties in all aspects of the problem complicate the prediction of earthquake-induced ground failure, including the identification of hazard-susceptible geomaterials, characterizing their spatial extent and physical properties, spatio-temporal variability in groundwater conditions, characterization of earthquake ground motions, assessing ground failure severity, and linking ground failure severity to infrastructure damage and loss.

Seismological Research Letters↗
USGS2024

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗
USGS2026

Navigating uncertainty and competing objectives: Spring chinook salmon recovery in the upper Willamette river

Globally, anadromous fish populations are threatened with extinction due to multiple factors, including river impoundments that block migration, widespread alteration of physical habitat, temperature, and flow regimes, commercial and recreational harvest, changes in biological communities, and long-term climate trends. In this synthesis, we describe how physical and biological factors, policy and law, and public resource allocation affect management of spring-run Chinook Salmon ( Oncorhynchus tshawytscha ) in the Upper Willamette River (UWR), Oregon, USA. Efforts to restore salmon populations often involve trade-offs, for example, water management decisions must account for flood control, agricultural and municipal water use, and management of other species. UWR Chinook Salmon recovery efforts are also governed by multiple laws, policies, and action agencies that in some cases have incongruent objectives. Competing and conflicting objectives, combined with uncertainty regarding the outcomes of proposed management actions, create significant challenges for decision makers. Resource limitations, regulatory constraints, and incongruent objectives have created challenges for managers in the UWR, but opportunities exist for improved adaptive management and collaboration, which could build trust and engagement among stakeholders and ultimately support the successful implementation of decision tools. A suite of decision support tools that have been used in the Willamette River basin and elsewhere across the range of Pacific salmon have the potential to enhance decision processes. These tools can be effective when decision makers and stakeholders commit to long-term, collaborative utilization of the tools for decision making, and when available resources and regulatory environments are conducive to implementation and adaptive refinement of both the decision-support tools and management plans. The general biological and institutional principles discussed for UWR Chinook Salmon in this work apply more generally to populations of anadromous fishes across their range, especially to populations in highly regulated river systems.

Oregon↗
USGS2025

Haunted Summerville: Ghostly lights or earthquake lights?

Among the colorful local lore in the Charleston, South Carolina, area, are a number of ghost stories, shared not only over campfires but also in published books. Among the most well-known of the stories is the tale of the Summerville Light. Local lore holds that a strange light sometimes seen in a remote area is a lantern carried by the ghost of a local woman who once waited hours for her husband, who turned out to have been decapitated earlier that day in a train accident (DePoppe, 2023). Extant sources suggest the ghost stories began to circulate in the 1950s to 1960s. So pervasive was the lore that (Old) Sheep Island Road became known among local residents as Light Road, with a local stretch of road known today as Old Light Road. Reviewing the location where the lights appear as well as the nature of accounts, I suggest that many if not all of the anecdotal observations can be most readily attributed to natural phenomena, including earthquake lights from earthquakes that were too small to be felt. Accounts of lights near Summerville cluster in proximity to the generally accepted epicenter of the 1886 Charleston, South Carolina, earthquake, where foreshocks to the 1886 mainshock were apparently concentrated, and within a few kilometers of three M3.5 – 4.4 earthquakes in 1959 and 1960.

South Carolina↗
USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗
USGS2025

Estimating earthquake source depth using teleseismic broadband waveform modeling at the USGS National Earthquake Information Center

The U.S. Geologic Survey National Earthquake Information Center (NEIC) monitors global seismicity, producing a catalog of earthquake source parameters in near-real-time to provide information that can help mitigate the societal impact of earthquakes. The NEIC commonly relies on teleseismic observations to constrain earthquake source parameters (e.g., location, depth, magnitude, and mechanism) due to a lack of local and regional observations. For these ‘teleseismic’ events, depth phase (i.e., pP , sP ) arrival time observations provide the best estimate on source depth. However, depth phases are often difficult to accurately identify and/or pick. Therefore, NEIC relies on waveform modeling, such as those determined from W-phase ( M ww ), body wave ( M wb ), and regional ( M wr ) moment tensor estimations, to provide constraints on source depth. While depth estimates from these approaches are informative, higher frequency observations provide more precise estimates because depth phases are more prominently observed at higher frequencies. Here, we present NEIC’s relatively high-frequency (~0.04 to 1 Hz) teleseismic waveform modeling approach, termed Synthetic Depth Phase Modeling (SynDepth), for determining source depth. SynDepth was developed to provide NEIC with a tool that enables rapid, accurate, and quantifiable estimates of earthquake source depth in cases where locator depths are not reliable. This relatively simple and fast procedure searches over 1 km-incremented source depths and an expanding triangular source-time function to find the best-fitting solution. We compare automatic SynDepth solutions for a dataset of 1,216 earthquakes (M5.5-M7.6) between 2017 and 2021 to NEIC-derived depth estimates from other methods. Our approach provides a robust depth estimate for earthquakes lacking local arrival time data, and it minimizes the need for analyst review of depth-phase picks ( pP , sP ) or using predefined ‘fixed’ depths.

Seismological Research Letters↗
USGS2026

Estimating paleotemperature using stable isotopes of soil-formed phyllosilicates from paleosols: A review

Fossilized soils, or paleosols, contain soil-formed phyllosilicates whose stable isotopic compositions may be used to calculate paleotemperature and thus reconstruct ancient terrestrial environments. Though paleosols are common in the geologic record, the use of phyllosilicates as paleotemperature proxies is limited in the literature owing to difficulties with selecting optimal paleosols, isolation from non-clay minerals and organic materials, mixtures of phyllosilicates in natural samples, wide variations of chemical compositions for phyllosilicates, and limited to undefined equilibrium fractionation factors between phyllosilicates-water. Here, we address these challenges by examining and comparing methods used for sample selection, mineral isolation, pretreatments, mineral identification, conventional and developing methods for oxygen and hydrogen isotopic analyses, and determination of phyllosilicate-water equilibrium fractionation factors, concluding with recommendations for best approaches for paleotemperature estimation. Additionally, we discuss how to identify and avoid detrital phyllosilicates, the impacts of diagenesis, comparison of stable isotope and non-isotope paleosol paleotemperature proxies, and challenges and opportunities for broadly using paleosols as paleoclimate archives. With ongoing efforts to refine this multi-faceted paleotemperature approach, the stable isotope geochemistry of soil-formed phyllosilicates continues to be an invaluable proxy system, enhancing our understanding of terrestrial paleoenvironments and paleoclimate.

Kansas↗
USGS2021

Critical review of mercury methylation and methylmercury demethylation rate constants in aquatic sediments for biogeochemical modeling

Mercury is a toxin that causes neurological impairments in adults, is particularly harmful for fetuses and children, and is deadly in severe cases, making it a worldwide health concern. Methylmercury (MeHg) is the environmentally relevant form of mercury (Hg) because it biomagnifies along the food chain. Methylmercury is mainly produced in aquatic sediments via methylation of inorganic Hg (Hg(II)) and transformed back via demethylation. Because transformation rates determine MeHg concentrations, quantification of methylation and demethylation rates is needed to inform management of MeHg. Published rate constants for Hg(II) methylation ( 𝑘 𝑚 ) and MeHg demethylation ( 𝑘 𝑑 ) vary greatly, stemming partly from differences in experimental methods. We conducted a comprehensive review of rate laws, evaluated published rate constants, and performed biogeochemical simulations to assess variability in reported 𝑘 𝑚 and 𝑘 𝑑 . Based on selected studies employing the same pseudo-first-order rate law and similar experimental methods, we found that 𝑘 𝑚 = 0.04 ± 0.03 d −1 is a reasonable range for wetland sediments. Over a number of environments, maximum 𝑘 𝑑 was smaller at sites without Hg source ( 𝑘 𝑑 = 0.5 d −1 ) than at sites with identified Hg source ( 𝑘 𝑑 = 1.8 d −1 ). Larger variability and higher uncertainty in 𝑘 𝑑 compared to 𝑘 𝑚 highlight the need for more research on MeHg demethylation rates. This critical review: (a) aids the design of future experimental studies of 𝑘 𝑚 and 𝑘 𝑑 ; (b) provides guidance for comparing rate constants from different studies; (c) presents a biogeochemical reaction model to assess rate constants; and (d) informs selection of 𝑘 𝑚 and 𝑘 𝑑 values from the literature for use in model simulations.

Critical Reviews in Environmental Science and Tech↗
USGS2026

Assessing the state of hydrologic science in the Upper Klamath Basin—A comprehensive review of data, tools, and models

Water demand in the Upper Klamath Basin (UKB) from various stakeholders and ecological needs often outstrips available supply, leading to persistent management challenges. This study reviews the state of hydrologic science within the UKB as of 2025—specifically, the tools, data, and models available for assessing five key components of the water system: (1) surface water; (2) precipitation; (3) evapotranspiration; (4) groundwater; and (5) water use. The UKB water supply is critical for Native American communities, regional agriculture, and federally listed fishes and faces challenges from competing needs, climate variability, and operational/regulatory requirements. We assess existing datasets, regional and national models, and historical studies to understand the available resources and identify gaps that may hinder integrated water assessments and management. Our findings indicate areas where improvements in data collection and model precision could improve the accuracy of water-availability forecasts and support water-management practices. This review can inform near-term forecasting, assist in optimizing water-resource data collection and management strategies, and support regional water-availability assessments of the basin.

Oregon↗