Geologic map of the Adelphia and Farmingdale quadrangles, Monmouth and Ocean Counties, New Jersey
No abstract available.
New Jersey↗
SEARCH · USGS Science
Results for “New Jersey Geological Survey Map Series”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Seismicity map of the State of New Jersey
This map is one of a series of seismicity maps produced by the U.S. Geological Survey that show earthquake data of individual states or groups of states at the scale of 1:1,000,000. This map shows only those earthquakes with epicenters located within the boundaries of New Jersey, even though earthquakes in nearby states may have been felt or may have caused damage in New Jersey.
New Jersey↗
Back-Island and Open-Ocean Shorelines, and Sand Areas of the Undeveloped Areas of New Jersey Barrier Islands, March 9, 1991, to July 30, 2013
Assessing the physical change to shorelines and wetlands is critical for determining the resiliency of wetland systems that protect adjacent habitat and communities. The wetland and back-barrier shorelines of the New Jersey barrier islands were changed by wave action and storm surge from Hurricane Sandy in 2012. The U.S. Geological Survey Coastal and Marine Geology Program is assessing the impact of Hurricane Sandy to understand its historical context and the vulnerability of wetland systems. These assessments require data that document physical changes over time, such as maps, aerial photographs, satellite imagery, and lidar elevation data. This Data Series Report includes open-ocean shorelines, back-island shorelines, back-island shoreline points, sand polygons, and sand lines for the undeveloped areas of New Jersey barrier islands. These data were extracted from orthoimagery (aerial photography) taken between March 9, 1991, and July 30, 2013. The images used were 0.3–1-meter (m)-resolution U.S. Geological Survey Digital Orthophoto Quarter Quads (DOQQ), U.S. Department of Agriculture National Agriculture Imagery Program (NAIP) images, National Oceanic and Atmospheric Administration images , and New Jersey Geographic Information Network images. The back-island shorelines were hand-digitized at the intersects of the apparent back-island shoreline and transects spaced at 20-m intervals. The open-ocean shorelines were hand-digitized at the approximate still-water level, such as tide level, which was fit through the average position of waves and swash apparent on the beach. Hand-digitizing was done at a scale of approximately 1:2,000. The sand polygons were derived by an image-processing unsupervised classification technique that separates images into classes. The classes were then visually categorized as either sand or not sand. Sand lines were taken from the sand polygons. Also included in this report are 20-m-spaced transect lines and the transect base lines.
New Jersey↗
Surficial sediment character of the New York-New Jersey offshore continental shelf region: A GIS compilation
Broad continental shelf regions such as the New York Bight are the product of a complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression (>100 m sea-level rise) following the end of the last Pleistocene ice advance ~ 20,000 years ago. The area of the U.S. Exclusive Economic Zone (U.S. EEZ) territory, extending 200 nautical miles seaward from the coast, is larger than the continental U.S. and contains submerged landforms that provide a variety of natural functions and societal benefits, such as: critical habitats for fisheries, ship navigation and homeland security, and engineering activities (i.e. oil and gas platforms, pipeline and cable routes, potential wind-energy-generation sites). Some parts of the continental margins, particularly inner-continental shelf regions, also contain unconsolidated hard-mineral deposits such as sand and gravel that are regarded as potential aggregate resources to meet or augment needs not met by onshore deposits (Williams, 1992). The present distribution of surficial sediment off the northeastern United States is shaped from the deposits left by the last glaciation and reflects the cumulative effects of sediment erosion, transport, sorting, and deposition by storm and tidal processes during the Holocene rise in sea level. As a result, the sediments on the sea floor represent both an historical record of former conditions and a guide to possible future sedimentary environments. The U.S. Geological Survey (USGS) through the Coastal and Marine Geology Program, in cooperation with the University of Colorado and other partners, has compiled extant sediment character and textural data as well as other geologic information on the sea floor from all regions around the U.S. into the usSEABED data system (Reid and others, 2005; Buczkowski and others, 2006; Reid and others, 2006). The usSEABED system, which contains information on sediment grain size and lithology for more than 340,500 stations within the U.S. EEZ. has been developed and populated with data as part of the USGS Marine Aggregate Resources and Processes and the National Benthic Habitats projects in order to provide the base-line data needed to update the current maps of offshore surficial geologic character and sediment distribution. The maps are also used to characterize benthic sea floor environments important for marine ecosystems. U.S. Geological Survey, Data Series 118 (Reid and others, 2005), of the usSEABED data release series, represents the combined efforts of the USGS and several other government agencies to provide a unified resource for accessing and preserving records of U.S. east coast sea floor geologic information and sediment texture data. For this present report, we have chosen to focus on the New York-New Jersey region, an area that has been intensely studied by the USGS for many years to address many complex issues. This report illustrates the uses of the usSEABED database for GIS applications, while offering additional insight into the resources and data available from the USGS and its collaborative institutions. This report is based on data contained in U.S. Geological Survey Data Series 118 (Reid and others, 2005) and shows an assortment of example GIS products that are possible using usSEABED. All data are intended to be GIS-ready and should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System. This project employs the Environmental Systems Research Institute's (ESRI) ArcView™ software. Many of these maps were made as part of the ongoing USGS study to assess marine aggregate resources offshore New York and New Jersey, but these maps can serve many other purposes. The marine science community, educators, students and others are encouraged to use these data to generate GIS products for their own purposes. The objectives of the Marine Aggregate Resources and Processes project are to produce a series of new geologic maps and reports of the sea floor that will provide scientific insights into the character and geologic development of U.S. continental margins and to use these maps and information to assess the potential availability of offshore sand and gravel resources. The mapping and aggregate resource assessments are being conducted on a national scale using the usSEABED data base as described in Williams and others (2003). Potential uses for these data include: (1) defining the geological variability of the sea floor in relation to benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and benthic habitats; (3) locating aggregate resources for beach nourishment and industrial applications; and (4) providing a detailed geospatial framework for future marine science research, monitoring, and management activities. The initial assessments are in progress for the New York Bight and Louisiana offshore areas.
New Jersey, New York↗
Preliminary integrated geologic map databases for the United States: Connecticut, Maine, Massachusetts, New Hampshire, New Jersey, Rhode Island and Vermont
The rapid growth in the use of Geographic Information Systems (GIS) has highlighted the need for regional and national scale digital geologic maps that have standardized information about geologic age and lithology. Such maps can be conveniently used to generate derivative maps for manifold special purposes such as mineral-resource assessment, metallogenic studies, tectonic studies, and environmental research. Although two digital geologic maps (Schruben and others, 1994; Reed and Bush, 2004) of the United States currently exist, their scales (1:2,500,000 and 1:5,000,000) are too general for many regional applications. Most states have digital geologic maps at scales of about 1:500,000, but the databases are not comparably structured and, thus, it is difficult to use the digital database for more than one state at a time. This report describes the result for a seven state region of an effort by the U.S. Geological Survey to produce a series of integrated and standardized state geologic map databases that cover the entire United States. In 1997, the United States Geological Survey's Mineral Resources Program initiated the National Surveys and Analysis (NSA) Project to develop national digital databases. One primary activity of this project was to compile a national digital geologic map database, utilizing state geologic maps, to support studies in the range of 1:250,000- to 1:1,000,000-scale. To accomplish this, state databases were prepared using a common standard for the database structure, fields, attribution, and data dictionaries. For Alaska and Hawaii new state maps are being prepared and the preliminary work for Alaska is being released as a series of 1:250,000 scale quadrangle reports. This document provides background information and documentation for the integrated geologic map databases of this report. This report is one of a series of such reports releasing preliminary standardized geologic map databases for the United States. The data products of the project consist of two main parts, the spatial databases and a set of supplemental tables relating to geologic map units. The datasets serve as a data resource to generate a variety of stratigraphic, age, and lithologic maps. This documentation is divided into four main sections: (1) description of the set of data files provided in this report, (2) specifications of the spatial databases, (3) specifications of the supplemental tables, and (4) an appendix containing the data dictionaries used to populate some fields of the spatial database and supplemental tables.
Connecticut, Maine, Massachusetts, New Hampshire, ↗
3.5-kHz Data Collected in the Wilmington Canyon Area During 1980, Endeavor Cruise 80-EN-056
During 1980, geophysical data were collected seaward of New Jersey in the vicinity of Wilmington Canyon on three cruises, GYRE 80-G-7B, GYRE 80-G-BB, and ENDEAVOR 80-EN-056 (discussed here). The objectives of these surveys of the Continental Slope and upper Rise, including Wilmington Canyon and the adjacent margin, were to extend existing geophysical coverage to the south of Wilmington Canyon and to provide detailed geologic and geophysical data on the poss.ible origin and evolution of submarine canyons and on sediment transport and other processes within the canyon domain. The geology of this area near Wilmington Canyon was discussed by McGregor, Stubblefield, and others and Stubblefield and others. On ENDEAVOR Cruise 80-EN-056, during October 9-10, 1980, a series of 3.5-kHz profiles was collected. The objective of acquiring these data was to supplement data from GYRE 80-G-7B so that a bathymetric map based on 1-km-spaced grid of data could be constructed. The 3.5-k.Hz system consisted of a hull-mounted transducer and a signal correlator. Ship's speed during the survey was 10 knots (18 km/hr). Data were recorded on a strip chart at a 1-second sweep rate. Navigational control for the cruise was based on Loran C. All times given on the data and navigation plots are in Greenwich mean time (GMT or Z). The quality of the records is very good, although time marks had to be added manually. Maximum subbottom penetration was approximately 100 m. Original records may be viewed at the u.s. Geological Survey, Woods Hole, MA 02543. Microfilms of the data and 1:40,000 scale trackcharts can be purchased only from the National Geophysical and Solar-Terrestr.ial Data Center, NOAA/EDIS/NGSDC, Code D621, 325 Broadway, Boulder, Colorado, 80303 (303-497-6338).
Open-File Report↗
Sediment data collected in 2014 from Barnegat Bay, New Jersey
In response to the 2010 Governor’s Action Plan to clean up the Barnegat Bay–Little Egg Harbor (BBLEH) estuary in New Jersey, the U.S. Geological Survey (USGS) partnered with the New Jersey Department of Environmental Protection in 2011 to begin a multidisciplinary research project to understand the physical controls on water quality in the bay. Between 2011 and 2013, USGS scientists mapped the geological and morphological characteristics of the seafloor of the BBLEH estuary using a suite of geophysical tools. However, this mapping effort included only surficial characterization of bay sediments; to verify the sub-surface geophysical data, sediment cores were required. This report serves as an archive of sedimentologic data from 18 vibracores collected from Barnegat Bay between May and August of 2014 by the U.S. Department of Agriculture Natural Resources Conservation Service (NRCS) on behalf of the USGS. The vibracores were collected in conjunction with an ongoing NRCS subaqueous soil survey for the BBLEH estuary. The data presented in this report, including descriptive core logs, core photographs, processed grain-size data, and Geographic Information System (GIS) data files with accompanying formal Federal Geographic Data Committee metadata, can be viewed or downloaded from the Data Products and Downloads page.
New Jersey↗
Regional hydrostratigraphic framework of Joint Base McGuire-Dix-Lakehurst and vicinity, New Jersey, in the context of perfluoroalkyl substances contamination of groundwater and surface water
A study was conducted by the U.S. Geological Survey, in cooperation with the U.S. Air Force, to describe the regional hydrostratigraphy of shallow aquifers and confining units underlying Joint Base McGuire-Dix-Lakehurst (JBMDL) and vicinity, New Jersey, in the context of contamination of groundwater and surface water by per- and polyfluoroalkyl substances (PFAS) potentially originating from JBMDL sources. The aquifers studied are two that crop out within JBMDL boundaries—the Kirkwood-Cohansey aquifer system and the Vincentown aquifer—and another aquifer near JBMDL that does not crop out at land surface—the Piney Point aquifer. The unconfined portion of the Vincentown aquifer and portions of the Kirkwood-Cohansey aquifer system that overlie the unconfined portion of the Vincentown aquifer are consolidated into, and described as, a single, separate unconfined aquifer system. Regionally extensive clay subunits that potentially create semiconfined hydrologic conditions within the mostly unconfined Kirkwood-Cohansey aquifer system also are identified. Two confining units were studied—the Manasquan-Shark River confining unit underlying the Kirkwood-Cohansey aquifer system, which includes the basal confining sediment in the Kirkwood Formation, and the Navesink-Hornerstown confining unit underlying the Vincentown aquifer. The hydrostratigraphic units are defined using available borehole geophysical logs, lithologic logs, and (or) drillers’ logs from 131 wells and are presented in a series of 8 aquifer structure maps and 12 cross sections. The framework positions JBMDL into a regional hydrostratigraphic structure for which higher-resolution delineation of the shallow aquifers can be constructed to determine potential pathways of PFAS contamination in groundwater to off-site drinking water wells in areas adjacent to JBMDL.
New Jersey↗
Geospatial compilation and digital map of centerpivot irrigated areas in the mid-Atlantic region, United States
To evaluate water availability within the Northern Atlantic Coastal Plain, the U.S. Geological Survey, in cooperation with the University of Delaware Agricultural Extension, created a dataset that maps the number of acres under center-pivot irrigation in the Northern Atlantic Coastal Plain study area. For this study, the extent of the Northern Atlantic Coastal Plain falls within areas of the States of New York, New Jersey, Delaware, Maryland, Virginia, and North Carolina. The irrigation dataset maps about 271,900 acres operated primarily under center-pivot irrigation in 57 counties. Manual digitizing was performed against aerial imagery in a process where operators used observable center-pivot irrigation signatures—such as irrigation arms, concentric wheel paths through cropped areas, and differential colors—to identify and map irrigated areas. The aerial imagery used for digitizing came from a variety of sources and seasons. The imagery contained a variety of spatial resolutions and included online imagery from the U.S. Department of Agriculture National Agricultural Imagery Program, Microsoft Bing Maps, and the Google Maps mapping service. The dates of the source images ranged from 2010 to 2012 for the U.S. Department of Agriculture imagery, whereas maps from the other mapping services were from 2013. Most of the irrigation in the study area is on the Delmarva Peninsula, where about 75 percent of the total acreage was delineated and where corn and soy bean are the main crops. The methods used to develop this dataset focused primarily on identifying center-pivot irrigation systems. In some instances (such as in in Suffolk County, New York), irrigated rectangular fields were observed through the aerial imagery, and these were included within the dataset. Other irrigation methods included subsurface drip and flood irrigation, which are commonly used on vegetable crops such as peppers and tomatoes and forage crops such as alfalfa in parts the western United States. Some fruit and nursery stock crops also use subsurface drip and flood irrigation. Drip irrigation is especially apparent in New Jersey where large plantings of truck crops are common. Subsurface drip and flood irrigation methods were not accounted for in this dataset. The U.S. Geological Survey collected these data to enhance the understanding of irrigation water demand and associated groundwater withdrawals for the Northern Atlantic Coastal Plain. The digitized acreage totals were compared with the irrigation estimates provided by the U.S. Department of Agriculture farm and ranch irrigation survey, which is the most comprehensive source of information on irrigation water use within the agricultural industry. This survey collects information on a wide range of topics, including the amount of water used, total acres irrigated, crop specific data, and even energy costs. The U.S. Department of Agriculture samples data for both entire States and individual counties.
Data Series↗
EAARL coastal topography–Northeast Barrier Islands 2007: First surface
These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the northeast coastal barrier islands in New York and New Jersey, acquired April 29-30 and May 15-16, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.
New York↗
EAARL coastal topography– Northeast barrier islands 2007: Bare earth
These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the northeast coastal barrier islands in New York and New Jersey, acquired April 29-30 and May 15-16, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.
New York↗
EAARL coastal topography — Sandy Hook 2007
These remotely sensed, geographically referenced elevation measurements of Lidar-derived topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of Gateway National Recreation Area's Sandy Hook Unit in New Jersey, acquired on May 16, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for pre-survey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.
New York↗
EAARL-B coastal topography: eastern New Jersey, Hurricane Sandy, 2012: first surface
These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for a portion of the New Jersey coastline beachface, acquired pre-Hurricane Sandy on October 26, and post-Hurricane Sandy on November 1 and November 5, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar system, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map nearshore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.
New Jersey↗
EAARL-B submerged topography: Barnegat Bay, New Jersey, pre-Hurricane Sandy, 2012
These remotely sensed, geographically referenced elevation measurements of lidar-derived submerged topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Barnegat Bay, New Jersey, acquired pre-Hurricane Sandy on October 18, 22, 23, and 26, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.
New Jersey↗
EAARL-B submerged topography: Barnegat Bay, New Jersey, post-Hurricane Sandy, 2012-2013
These remotely sensed, geographically referenced elevation measurements of lidar-derived submerged topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Barnegat Bay, New Jersey, acquired post-Hurricane Sandy on November 1, 5, 16, 20, and 30, 2012; December 5, 6, and 21, 2012; and January 10, 2013. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar system, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map nearshore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site .
New Jersey↗
EAARL Coastal Topography-Sandy Hook Unit, Gateway National Recreation Area, New Jersey, Post-Nor'Ida, 2009
These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Sandy Hook Unit of Gateway National Recreation Area in New Jersey, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.
Data Series↗
Water-level conditions in the confined aquifers of the New Jersey Coastal Plain, 2013
The Coastal Plain aquifers of New Jersey provide an important source of water for more than 3.5 million people. In 2013, groundwater withdrawals from 10 confined aquifers of the New Jersey Coastal Plain totaled about 190 million gallons per day. Steadily increasing withdrawals from the late 1800s to the early 1990s resulted in declining water levels and the formation of regional cones of depression in many confined Coastal Plain aquifers. Starting in 1978, the U.S. Geological Survey (USGS) began mapping the potentiometric surfaces of the major confined Coastal Plain aquifers every 5 years to provide a regional assessment of groundwater conditions. In a study conducted by the USGS, in cooperation with the New Jersey Department of Environmental Protection, water levels in 10 confined aquifers of the New Jersey Coastal Plain were measured and evaluated to provide a regional overview of groundwater conditions during fall 2013. Water levels were measured in 987 wells in New Jersey, and parts of Pennsylvania and Delaware. Potentiometric-surface maps were prepared for, in ascending order of age, the confined Cohansey aquifer of Cape May County, Rio Grande water-bearing zone, Atlantic City 800-foot sand, Piney Point aquifer, Vincentown aquifer, Wenonah-Mount Laurel aquifer, Englishtown aquifer system, and the Upper, Middle, and Lower aquifers of the Potomac-Raritan-Magothy (PRM) aquifer system. Persistent, regionally extensive cones of depression were present in the potentiometric surfaces of the Englishtown aquifer system and Wenonah-Mount Laurel aquifer in Ocean and Monmouth Counties; Wenonah-Mount Laurel and Upper, Middle, and Lower PRM aquifers in Camden County; and Atlantic City 800-foot sand in Atlantic County. Changes in water levels from 2008 to 2013 were measured in many Coastal Plain aquifers in New Jersey. In some areas, water levels continued to decline as a result of pumping, but in other areas water levels continued to recover as a result of regulated decreases in groundwater withdrawals. Since 2008, in the confined Cohansey aquifer in Cape May County, water levels generally did not change; however, cones of depression in the potentiometric surface of the Piney Point aquifer in some areas of Cumberland County deepened by more than 20 feet (ft). In Critical Area 1, an area of restricted withdrawals, measured water levels in the Wenonah-Mount Laurel aquifer declined in parts of southern Monmouth County by more than 10 ft; however, rises in water levels of more than 10 ft were measured in parts of northern Ocean and Monmouth Counties. Since 2008, in Critical Area 2, also an area of restricted withdrawals, measured water levels in the Wenonah-Mount Laurel aquifer rose more than 20 ft in parts of western Burlington County and more than 20 ft in parts of western Camden County. Since 2008, in Critical Area 1, measured water levels in the Englishtown aquifer system declined in parts of eastern Ocean County by more than 10 ft and in southeastern Monmouth County by more than 20 ft; however, rises in water levels of more than 10 ft were measured in other parts of Ocean and Monmouth Counties. In general, since 2008 in Critical Area 2, in the Upper PRM aquifer, measured water levels continued to rise by 10 ft or more in central and western Burlington and central Camden Counties. In the Middle PRM aquifer in Critical Area 2, measured water levels rose in parts of central Camden County by 10 ft or more. However, measured water levels in the Lower PRM aquifer in Critical Area 2 were more than 10 ft lower in the center of the cone of depression in central Camden County, but measured water levels continued to rise updip from this area in Critical Area 2. Seasonal water-level fluctuations are presented in time-series hydrographs for 77 wells during 1978–2013. Analyses of long-term water-level changes for the period 2008–13 indicate downward water-level trends at 14 wells (18 percent), upward trends at 34 wells (44 percent), and no substantial change at 29 wells (38 percent). Downward trends were most often observed for wells screened in the Piney Point aquifer and the Atlantic City 800-foot sand. Upward water-level trends were most often measured for wells screened in the PRM aquifer system. Upward water-level trends also were measured for wells in the Englishtown aquifer system and the Wenonah-Mount Laurel aquifer in Critical Area 1 in some areas; however, downward trends and no substantial changes were measured in other areas.
New Jersey↗