Demand and supply of nonfuel minerals and materials for the United States energy industry, 1975-1990 :a preliminary report
Explore the source record for details and available documents.
Professional Paper↗
SEARCH · USGS Science
Results for “Minerals and Energy - Raw Materials Report”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Non-fuel minerals and materials needed by the United States energy industry, 1975-1990; a preliminary report
Explore the source record for details and available documents.
Open-File Report↗
Gallery of melt textures developed in Westerly Granite during high-pressure triaxial friction experiments
Introduction Melting occurred during stick-slip faulting of granite blocks sheared at room-dry, room-temperature conditions in a triaxial apparatus at 200–400 megapascals (MPa) confining pressure. Petrographic examinations of melt textures focused largely on the 400-MPa run products. This report presents an overview of the petrographic data collected on those samples, followed by brief descriptions of annotated versions of all the images. Scanning electron microscope (SEM) images of the starting materials and the three examined 400-MPa samples are presented in this report. Secondary-electron (SE) and backscattered-electron (BSE) imaging techniques were used on different samples. The SE images look down on the sawcut surfaces, yielding topographic and three-dimensional textural information. The BSE imaging was done on samples cut to provide cross-sectional views of the glass-filled shear band (or zone) that developed along the sawcut. Brightness in the BSE images increases with increasing mean atomic number of the material. Additional chemical information about the quenched melt and adjoining minerals was obtained using the energy dispersive system of the SEM during BSE examinations. However, the very narrow shear-band thicknesses and common occurrence of very fine lamellar compositional layering limited the usefulness of this technique for estimating melt chemistry.
Open-File Report↗
Technology advancement: A factor in increasing resource use
The specter of mineral resource scarcity has been repeatedly raised as a concern because ever-growing populations with seemingly insatiable appetites for minerals place claims against a finite resource endowment. This report analyzes how technology has helped to ease resource constraints, and uses case studies of aluminum, copper, potash, and sulfur minerals to identify the effects of technology on resource supply. In spite of heightened demand for and increased loss of resources to environmental policy and urbanization, mineral producers historically have been able to continually expand production and lower costs. Specific production increases for the years 1900-98 were: aluminum (3,250 percent), copper (2,465 percent), potash (3,770 percent), and sulfur (6,000 percent). For the same period, constant-dollar (1998) prices decreased: aluminum (90 percent), copper (75 percent), potash (94 percent), and sulfur (89 percent). The application of technology has made available mineral deposits that were previously overlooked or considered non-viable. Using technology, producers can meet the demand for stronger, energy-efficient, more environmentally safe products with less physical material. Technologies have been developed to increase the amount of materials recycled and remanufactured. Technology development can occur in breakthroughs, but most often advances incrementally. Technological development is driven by the profit motive.
Open-File Report↗
Examination of Libby, Montana, Fill Material for Background Levels of Amphibole from the Rainy Creek Complex Using Scanning Electron Microscopy and X-Ray Microanalysis
Natural background levels of Libby-type amphibole in the sediment of the Libby valley in Montana have not, up to this point, been determined. The purpose of this report is to provide the preliminary findings of a study designed by both the U.S. Geological Survey and the U.S. Environmental Protection Agency and performed by the U.S. Geological Survey. The study worked to constrain the natural background levels of fibrous amphiboles potentially derived from the nearby Rainy Creek Complex. The material selected for this study was sampled from three localities, two of which are active open-pit sand and gravel mines. Seventy samples were collected in total and examined using a scanning electron microscope equipped with an energy dispersive x-ray spectrometer. All samples contained varying amounts of feldspars, ilmenite, magnetite, quartz, clay minerals, pyroxene minerals, and non-fibrous amphiboles such as tremolite, actinolite, and magnesiohornblende. Of the 70 samples collected, only three had detectable levels of fibrous amphiboles compatible with those found in the rainy creek complex. The maximum concentration, identified here, of the amphiboles potentially from the Rainy Creek Complex is 0.083 percent by weight.
Open-File Report↗
Hydrologic assessment and numerical simulation of groundwater flow, San Juan Mine, San Juan County, New Mexico, 2010–13
Coal combustion byproducts (CCBs), which are composed of fly ash, bottom ash, and flue gas desulfurization material, produced at the coal-fired San Juan Generating Station (SJGS), located in San Juan County, New Mexico, have been buried in former surface-mine pits at the San Juan Mine, also referred to as the San Juan Coal Mine, since operations began in the early 1970s. This report, prepared by the U.S. Geological Survey in cooperation with the Mining and Minerals Division of the New Mexico Energy, Minerals and Natural Resources Department, describes results of a hydrogeologic assessment, including numerical groundwater modeling, to identify the timing of groundwater recovery and potential pathways for groundwater transport of metals that may be leached from stored CCBs and reach hydrologic receptors after operations cease. Data collected for the hydrologic assessment indicate that groundwater in at least one centrally located reclaimed surface-mining pit has already begun to recover. The U.S. Geological Survey numerical modeling package MODFLOW–NWT was used with MODPATH particle-tracking software to identify advective flow paths from CCB storage areas toward potential hydrologic receptors. Results indicate that groundwater at CCB storage areas will recover to the former steady state, or in some locations, groundwater may recover to a new steady state in 6,600 to 10,600 years at variable rates depending on the proximity to a residual cone-of-groundwater depression caused by mine dewatering and regional oil and gas pumping as well as on actual, rather than estimated, groundwater recharge and evapotranspirational losses. Advective particle-track modeling indicates that the number of particles and rates of advective transport will vary depending on hydraulic properties of the mine spoil, particularly hydraulic conductivity and porosity. Modeling results from the most conservative scenario indicate that particles can migrate from CCB repositories to either the Shumway Arroyo alluvium after 1,320 years and from there to the San Juan River alluvium after 1,520 years or from southernmost CCB repositories directly to the San Juan River alluvium after 2,400 years after the cessation of mining.
New Mexico↗
Chemical analyses of soils and other surficial materials, Alaska
Introduction: The favorable response to the reports on the geochemistry of unconsolidated surficial materials of the conterminous United States (informally called the '50-mile geochemical survey,' Shacklette and others, 1971a, 1971b, 1973, and 1974) led us, in 1975, to initiate a somewhat similar survey of Alaska. The principal objective of studies of this type is to establish estimates of the abundance of elements in soils and other surficial materials. Such information is useful in the evaluation of geochemical data for (1) mineral resources, (2) environmental appraisals, and (3) the definition of broad-scale geochemical patterns. For about six years this effort progressed slowly on a non-funded, time-available basis. During fiscal years 1982 and 1983, however, some funds were made available through the USGS Energy Lands and Alaska Mineral Surveys programs which allowed for the completion of the field-work phase of the project. The sampling plan was kept simple because, as with the 50-mile study, the acquisition of samples depended on the voluntary cooperation of field personnel (only about 40 percent of the total number of samples was obtained by the authors).
Open-File Report↗
Summary of the mineral- and energy-resource endowment, BLM roswell resource area, east-central New Mexico
In this summary of two comprehensive resource reports produced by the U.S. Bureau of Mines and the U.S. Geological Survey for the U.S. Bureau of Land Management, we discuss the mineral- and energyresource endowment of the 14-millon-acre Roswell Resource Area, New Mexico, managed by the Bureau of Land Management. The Bureau and Survey reports result from separate studies that are compilations of published and unpublished data and integrate new findings on the geology, geochemistry, geophysics, mineral, industrial, and energy commodities, and resources for the seven-county area. The reports have been used by the Bureau of Land Management in preparation of the Roswell Resource Area Resource Management Plan, and will have future use in nationwide mineral- and energy-resource inventories and assessments, as reference and training documents, and as public-information tools. In the Roswell Resource Area, many metals, industrial mineral commodities, and energy resources are being, or have been, produced or prospected. These include metals and high-technology materials, such as copper, gold, silver, thorium, uranium and/or vanadium, rare-earth element minerals, iron, manganese, tungsten, lead, zinc, and molybdenum; industrial mineral resources, including barite, limestone/dolomite, caliche, clay, fluorspar, gypsum, scoria, aggregate, and sand and gravel; and fuels and associated resources, such as oil, gas, tar sand and heavy oil, coal, and gases associated with hydrocarbons. Other commodities that have yet to be identified in economic concentrations include potash, halite, polyhalite, anhydrite, sulfur, feldspar, building stone and decorative rock, brines, various gases associated with oil and gas exploration, and carbon dioxide. ?? 1993 Oxford University Press.
Nonrenewable Resources↗
From Projectile Points to Microprocessors - The Influence of Some Industrial Minerals
In the language of economic geology, Earth materials are classified as metallic ores, fuel minerals, gemstones, and industrial minerals. Most people know that metallic ores yield shiny, conductive, ductile elements such as copper, iron, or gold. Most understand that energy-producing coals constitute a fuel mineral. Likewise, dazzling rubies and rare sapphires are universally recognized as gemstones. The fourth group, industrial minerals, is largely unknown to the general public, even though industrial minerals are as essential to daily life as metals and fuel minerals. This report examines the occurrence and practical uses of nine important industrial minerals - constituting just a few of the more than 50 industrial minerals that shape human culture.
Circular↗
The Alaska Mineral Resource Assessment Program: Background information to accompany folio of geologic and resource maps of the Ugashik, Bristol Bay, and western part of Karluk quadrangles, Alaska
The Ugashik, Bristol Bay, and western part of Karluk quadrangles (1:250,000) are a part of the Alaska Peninsula in southwestern Alaska. This circular, in conjunction with a companion folio of MF-series maps, two I-series geologic maps, and three bulletins, represents the results of integrated field and laboratory studies on the geology, geophysics, geochemistry, paleontology, geochronology, and mineral resources of the quadrangles. These studies were undertaken to provide a modern assessment of the mineral and energy resources of the quadrangles. Each map contains descriptive text, explanatory material, tables, diagrams, and pertinent references. This circular provides background information for the mineral resource assessment map (MF-1539-1) and integrates the component M F- and I-series maps. A comprehensive bibliography cites both specific and general references relevant to the geology and resources of the quadrangles.
Alaska↗
Rare earth element and rare metal inventory of central Asia
Rare earth elements (REE), with their unique physical and chemical properties, are an essential part of modern living. REE have enabled development and manufacture of high-performance materials, processes, and electronic technologies commonly used today in computing and communications, clean energy and transportation, medical treatment and health care, glass and ceramics, aerospace and defense, and metallurgy and chemical refining. Central Asia is an emerging REE and rare metals (RM) producing region. A newly compiled inventory of REE-RM-bearing mineral occurrences and delineation of areas-of-interest indicate this region may have considerable undiscovered resources.
Fact Sheet↗
Contributions to economic geology, 1902
This bulletin has been prepared primarily with a view to securing prompt publication of the economic results of investigations by the United States Geological Survey. It is designed to meet the wants of the busy man, and is so condensed that he will be able to obtain results and conclusions with a minimum expenditure of time and energy. It also affords a better idea of the work which the Survey as an organization is-carrying on for the direct advancement of mining interests throughout the country than can readily be obtained from the more voluminous reports. Should this bulletin be favorably received by those interested in the development of the mineral industries of the United States, it is proposed to publish early in each calendar year a similar bulletin containing the results of the last year's field work in economic geology. In the preparation of the present volume, promptness of publication has been made secondary only to the economic utility of the material presented. The papers included are such only as have a direct economic bearing, all questions of purely scientific interest being excluded. The papers represent three classes : (1) Preliminary discussions of the results of extended economic investigations, which will later be published by the Survey in more detailed form; (2) comparatively detailed descriptions of occurrences of economic interest, noted by geologists of the Survey in the course of their field work, but not of sufficient importance to necessitate a later and more extended description; (3) abstracts of certain economic papers which have appeared in Survey publications during the last year, chiefly such as give a general account of the distribution and mode of occurrence of particular mineral deposits throughout the United States. The papers have been grouped according to the subjects treated. At the end of each section is given a list of previous publications on that subject by this Survey. These lists will be found serviceable by those who wish to ascertain what has been accomplished by the Survey in the investigation of any particular group of mineral products. They are generally confined to Survey publications, though a few titles of important papers published elsewhere by members of the Survey are included.
Bulletin↗
Determination of pre-mining geochemical conditions and paleoecology in the Animas River Watershed, Colorado
Determination of the pre-mining geochemical baseline in bed sediments and the paleoecology in a watershed impacted by historical mining activity is of utmost importance in establishing watershed restoration goals. We have approached this problem in the Animas River watershed using geomorphologic mapping methods to identify old pre-mining sediments. A systematic evaluation of possible sites resulted in collection of a large number of samples of pre-mining sediments, overbank sediments, and fluvial tailings deposits from more than 50 sites throughout the watershed. Chemical analysis of individual stratigraphic layers has resulted in a chemical stratigraphy that can be tied to the historical record through geochronological and dendochronological studies at these sites. Preliminary analysis of geochemical data from more than 500 samples from this study, when coupled with both the historical and geochronological record, clearly show that there has been a major impact by historical mining activities on the geochemical record preserved in these fluvial bed sediments. Historical mining activity has resulted in a substantial increase in metals in the very fine sand to clay sized component of the bed sediment of the upper Animas River, and Cement and Mineral Creeks. Enrichment factors for metals in modern bed sediments, relative to the pre-mining sediments, range from a factor of 2 to 6 for arsenic, 4 to more than 10 for cadmium, 2 to more than 10 for lead, 2 to 5 for silver, and 2 to more than 15 for zinc. However, the pre-mining bed sediment geochemical baseline is high relative to crustal abundance levels of many orerelated metals and the watershed would readily be identified as a highly mineralized area suitable for mineral exploration if it had not been disturbed by historical mining activity. We infer from these data that the water chemistry in the streams was less acidic prior to historical mining activity in the watershed. Paleoentologic evidence does not indicate a healthy aquatic habitat in any of the stream reaches investigated above the confluence of the Animas River with Mineral Creek (fig. 1) prior to the impact of historical mining activity. The absence of paleoentologic remains is interpreted to reflect the poor preservation regime of the bed sediment materials sampled. The fluvial sediments sampled in this study represent higher energy environments than are conducive to the preservation of most aquatic organisms including fish remains. We interpret the sedimentological data to indicate that there has been substantial loss of riparian habitat in the upper Animas River above Howardsville as a result of historical mining activity.
Colorado↗
Carnotite resources of the upper group area, San Miguel County, Colorado
The Upper group area, which consists of 10 Government claims and adjoining public land, is 2 miles southeast of Slick Rock, San Miguel County, Colo., in unsurveyed secs. 5 and 6, T. 43 N., R. 18 W., New Mexico principal meridian. The area is equidistant from mills at Monticello, Utah, and Naturita, Colo. Both mills are reached by about 45 miles of all-weather roads. About 2,700 tons of carnotite ore was produced from the area between 1921 and 1943 (tons used in this report are short tons). This ore had an estimated average grade of 0.25 percent U30g and 1.7 percent V205. The ore deposits are in the top sandstone stratum of the Salt Wash sandstone member of the Tipper Jurassic Morrison formation. The principal ore-bearing minerals, which mainly impregnate the sandstone, consist of uranium-bearing carnotite and a micaceous vanadium-bearing mineral called “roscoelite." The deposits are mostly in small podlike masses called "rolls." The size of the rolls ranges from less than 50 to more than 1,500 tons each. The long axes of the rolls have a dominant northeasterly to easterly trend. Exploration by the Geological Survey was done on behalf of the Atomic Energy Commission to test unexplored ground for new deposits of carnotite ore and to gain a better appraisal of the reserves in the area. From 1948 to 1950, 186 diamond-drill holes were completed for a total of 14,577 feet. The areas of favorable sandstone were found and defined by holes drilled 300 to 500 feet apart. Altered mudstone, carbonaceous material in the sandstone, and color of the sandstone were used to determine the favorability of the sandstone. Within areas containing favorable sandstone holes were drilled on 100- to 150-foot centers to find deposits. Where deposits were found more than 20 feet below the surface, they were roughly outlined by holes drilled on 50- to 75- foot centers. Deposits discovered within 20 feet of the surface were not outlined. Reserves in deposits found by the drilling are classed as indicated and inferred, whereas those reserves that are predicted solely on geologic evidence are classed as potential. Indicated reserves computed at the highest thickness and grade cut-offs (1 foot or more thick and 0.10 percent U3O8 or .10 percent V205) total 5,000 tons, averaging 0.19 percent U308 and 1.6 percent V205. Inferred reserves computed at the same cut-offs total 3,500 tons, averaging .22 percent U308 and 1.7 percent V205. Both the indicated and inferred reserves, as well as the pounds of contained U3O8and V205, are summarized in table 1. Potential reserves are predicted to total about 1,500 tons, averaging about 0.20 percent U3O8 and 1.6 percent V205. Most of the potential reserves are expected to be in small scattered deposits within 20 feet of the surface. No additional diamond drilling by the Geological Survey is planned in the Upper group area. Several specific localities, principally in the central part of the area, are recommended for further exploration by jackhammer and wagon drilling by lessees and operators.
Colorado↗
Developing integrated methods to address complex resource and environmental issues
Introduction This circular provides an overview of selected activities that were conducted within the U.S. Geological Survey (USGS) Integrated Methods Development Project, an interdisciplinary project designed to develop new tools and conduct innovative research requiring integration of geologic, geophysical, geochemical, and remote-sensing expertise. The project was supported by the USGS Mineral Resources Program, and its products and acquired capabilities have broad applications to missions throughout the USGS and beyond. In addressing challenges associated with understanding the location, quantity, and quality of mineral resources, and in investigating the potential environmental consequences of resource development, a number of field and laboratory capabilities and interpretative methodologies evolved from the project that have applications to traditional resource studies as well as to studies related to ecosystem health, human health, disaster and hazard assessment, and planetary science. New or improved tools and research findings developed within the project have been applied to other projects and activities. Specifically, geophysical equipment and techniques have been applied to a variety of traditional and nontraditional mineral- and energy-resource studies, military applications, environmental investigations, and applied research activities that involve climate change, mapping techniques, and monitoring capabilities. Diverse applied geochemistry activities provide a process-level understanding of the mobility, chemical speciation, and bioavailability of elements, particularly metals and metalloids, in a variety of environmental settings. Imaging spectroscopy capabilities maintained and developed within the project have been applied to traditional resource studies as well as to studies related to ecosystem health, human health, disaster assessment, and planetary science. Brief descriptions of capabilities and laboratory facilities and summaries of some applications of project products and research findings are included in this circular. The work helped support the USGS mission to “provide reliable scientific information to describe and understand the Earth; minimize loss of life and property from natural disasters; manage water, biological, energy, and mineral resources; and enhance and protect our quality of life.” Activities within the project include the following: Spanned scales from microscopic to planetary; Demonstrated broad applications across disciplines; Included life-cycle studies of mineral resources; Incorporated specialized areas of expertise in applied geochemistry including mineralogy, hydrogeology, analytical chemistry, aqueous geochemistry, biogeochemistry, microbiology, aquatic toxicology, and public health; and Incorporated specialized areas of expertise in geophysics including magnetics, gravity, radiometrics, electromagnetics, seismic, ground-penetrating radar, borehole radar, and imaging spectroscopy. This circular consists of eight sections that contain summaries of various activities under the project. The eight sections are listed below: Laboratory Facilities and Capabilities, which includes brief descriptions of the various types of laboratories and capabilities used for the project; Method and Software Development, which includes summaries of remote-sensing, geophysical, and mineralogical methods developed or enhanced by the project; Instrument Development, which includes descriptions of geophysical instruments developed under the project; Minerals, Energy, and Climate, which includes summaries of research that applies to mineral or energy resources, environmental processes and monitoring, and carbon sequestration by earth materials; Element Cycling, Toxicity, and Health, which includes summaries of several process-oriented geochemical and biogeochemical studies and health-related research activities; Hydrogeology and Water Quality, which includes descriptions of innovative geophysical, remote-sensing, and geochemical research pertaining to hydrogeology and water-quality applications; Hazards and Disaster Assessment, which includes summaries of research and method development that were applied to natural hazards, human-caused hazards, and disaster assessments; and Databases and Framework Studies, which includes descriptions of fundamental applications of geophysical studies and of the importance of archived data.
Circular↗
Estimates of electricity requirements for the recovery of mineral commodities, with examples applied to sub-Saharan Africa
To produce materials from mine to market it is necessary to overcome obstacles that include the force of gravity, the strength of molecular bonds, and technological inefficiencies. These challenges are met by the application of energy to accomplish the work that includes the direct use of electricity, fossil fuel, and manual labor. The tables and analyses presented in this study contain estimates of electricity consumption for the mining and processing of ores, concentrates, intermediate products, and industrial and refined metallic commodities on a kilowatt-hour per unit basis, primarily the metric ton or troy ounce. Data contained in tables pertaining to specific currently operating facilities are static, as the amount of electricity consumed to process or produce a unit of material changes over time for a great number of reasons. Estimates were developed from diverse sources that included feasibility studies, company-produced annual and sustainability reports, conference proceedings, discussions with government and industry experts, journal articles, reference texts, and studies by nongovernmental organizations.
Open-File Report↗
Environmental considerations related to mining of nonfuel minerals
Throughout most of human history, environmental stewardship during mining has not been a priority partly because of the lack of applicable laws and regulations and partly because of ignorance about the effects that mining can have on the environment. In the United States, the National Environmental Policy Act of 1969, in conjunction with related laws, codified a more modern approach to mining, including the responsibility for environmental stewardship, and provided a framework for incorporating environmental protection into mine planning. Today, similar frameworks are in place in the other developed countries of the world, and international mining companies generally follow similar procedures wherever they work in the world. The regulatory guidance has fostered an international effort among all stakeholders to identify best practices for environmental stewardship. The modern approach to mining using best practices involves the following: (a) establishment of a pre-mining baseline from which to monitor environmental effects during mining and help establish geologically reasonable closure goals; (b) identification of environmental risks related to mining through standardized approaches; and (c) formulation of an environmental closure plan before the start of mining. A key aspect of identifying the environmental risks and mitigating those risks is understanding how the risks vary from one deposit type to another—a concept that forms the basis for geoenvironmental mineral-deposit models. Accompanying the quest for best practices is the goal of making mining sustainable into the future. Sustainable mine development is generally considered to be development that meets the needs of the present generation without compromising the ability of future generations to meet their own needs. The concept extends beyond the availability of nonrenewable mineral commodities and includes the environmental and social effects of mine development. Global population growth, meanwhile, has decreased the percentage of inhabitable land available to support society’s material needs. Presently, the land area available to supply the mineral resources, energy resources, water, food, shelter, and waste disposal needs of all Earth’s inhabitants is estimated to be 135 square meters per person. Continued global population growth will only increase the challenges of sustainable mining. Current trends in mining are also expected to lead to new environmental challenges in the future, among which are mine-waste management issues related to mining larger deposits for lower ore grade; water-management issues related to both the mining of larger deposits and the changes in precipitation brought about by climate change; and greenhouse gas issues related to reducing the carbon footprint of larger, more energy-intensive mining operations.
Professional Paper↗
A proposed U.S. resource classification system
Energy is a worldwide problem calling for worldwide communication to resolve the many supply and distribution problems. Essential to a communication problem is a definition and comparability of elements being communicated. The U.S. Geological Survey, with the cooperation of the U.S. Bureau of Mines and the U.S. Department of Energy, has devised a classification system for all mineral resources, the principles of which we believe offer the possibility of world communication. At this time several other systems, extant or under development (Potential Gas Committee of the U.S., United Nations Resource Committee, and the American Society of Testing and Materials), are internally consistent and provide easy communication linkage. The system in use by the uranium community in the United States, however, ties resource quantities to Forward-Cost dollar values rendering them inconsistent with other classifications and not therefore comparable. The paper will then develop the rationale for the new USGS resource classification and note its benefits relative to a Forward-Cost classification and its relationship specifically to other extant classifications.
Open-File Report↗