USGS Science⌕ Search

FIND YOUR NEXT DISCOVERY

Results for “Journal of the Mechanics and Physics of Solids”

Original records, connected by a shared subject.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,261 recordsLinked to original sources
USGS2025

Impact of gas/liquid phase change of CO2 during injection for sequestration

CO 2 sequestration in deep saline formations is an effective and important process to control the rapid rise in CO 2 emissions. The process of injecting CO 2 requires reliable predictions of the stress in the formation and the fluid pressure distributions – particularly since monitoring of the CO 2 migration is difficult – to mitigate leakage, prevent induced seismicity, and analyze wellbore stability. A key aspect of CO 2 is the gas–liquid phase transition at the temperatures and pressures of relevance to leakage and sequestration, which has been recognized as being critical for accurate predictions but has been challenging to model without ad hoc empiricisms. This paper presents a robust multiphase thermodynamics-based poromechanics model to capture the complex phase transition behavior of CO 2 and predict the stress and pressure distribution under super- and sub- critical conditions during the injection process. A finite element implementation of the model is applied to analyze the behavior of a multiphase porous system with CO 2 as it displaces the fluid brine phase. We find that if CO 2 undergoes a phase transition in the geologic reservoir, the spatial variation of the density is significantly affected, and the migration mobility of CO 2 decreases in the reservoir. A key feature of our approach is that we do not a priori assume the location of the CO 2 gas/liquid interface – or even if it occurs at all – but rather, this is a prediction of the model, along with the spatial variation of the phase of CO 2 and the change of the saturation profile due to the phase change.

Journal of the Mechanics and Physics of Solids↗
USGS2024

RegionGrow3D: A deterministic analysis for characterizing discrete three-dimensional landslide source areas on a regional scale

Regional-scale characterization of shallow landslide hazards is important for reducing their destructive impact on society. These hazards are commonly characterized by (a) their location and likelihood using susceptibility maps, (b) landslide size and frequency using geomorphic scaling laws, and (c) the magnitude of disturbance required to cause landslides using initiation thresholds. Typically, this is accomplished through the use of inventories documenting the locations and triggering conditions of previous landslides. In the absence of comprehensive landslide inventories, physics-based slope stability models can be used to estimate landslide initiation potential and provide plausible distributions of landslide characteristics for a range of environmental and forcing conditions. However, these models are sometimes limited in their ability to capture key mechanisms tied to discrete three-dimensional (3D) landslide mechanics while possessing the computational efficiency required for broad-scale application. In this study, the RegionGrow3D (RG3D) model is developed to broadly simulate the area, volume, and location of landslides on a regional scale (≥1,000 km 2 ) using 3D, limit-equilibrium (LE)-based slope stability modeling. Furthermore, RG3D is incorporated into a susceptibility framework that quantifies landsliding uncertainty using a distribution of soil shear strengths and their associated probabilities, back-calculated from inventoried landslides using 3D LE-based landslide forensics. This framework is used to evaluate the influence of uncertainty tied to shear strength, rainfall scenarios, and antecedent soil moisture on potential landsliding and rainfall thresholds over a large region of the Oregon Coast Range, USA.

Journal of Geophysical Research: Earth Surface↗
USGS2026

Small-volume tephra deposits of the May 1924 explosions from Halemaʻumaʻu, Kīlauea volcano, and their origin

More than 50 explosive eruptions occurred from Halemaʻumaʻu at Kīlauea volcano over 17 days from May 11 to 27, 1924. Ballistics weighing as much as 14,000 kg were ejected and most landed within 2 km of the vent. Fine ash made up a major component of the tephra and was dispersed tens of kilometers downwind. Draining of the Halemaʻumaʻu lava lake occurred in late February 1924, with the crater floor eventually subsiding by a further ∼70 m (to ∼180 m below the crater rim) by the time the first explosions took place during the night of May 10–11. The largest explosions occurred on May 17–18 and smaller explosions continued until May 27, at which point Halemaʻumaʻu had more than doubled in width and depth. The explosions generated plumes reaching up to ∼10 km high with ballistics ejected up to 2 km from the crater. Almost 100 years later, we investigate and characterize the preserved tephra deposits within ∼3 km of the 1924 crater rim. Grain size and shape analyses were performed on 202 samples collected from 34 tephra profiles using dynamic image analysis, with a subset of layers from nine tephra profiles used for componentry (200 grains per layer in the 0.5–1 mm size fraction). Additionally, we characterize the average diameters (using the five largest clasts) at 216 locations and measure the average diameters of 2291 ballistics (largest per ∼100 m 2 area). Physical descriptions from fieldwork and grain size distributions were used to subdivide the tephra layers into five lithofacies: coarse homogeneous, fine homogenous, red ash, accretionary lapilli-bearing, and finely laminated. Grain size versus shape data show a range of values that demonstrate most grains are dense, smooth, and equant, in alignment with lithic clasts dominating the tephra componentry. The fine grained and accretionary lapilli-bearing nature of some of these lithofacies confirms that water influenced the style of the explosions. However, we also note juvenile clasts within many of the tephra layers, indicating that many of the layers were formed during phreatomagmatic explosions (sensu stricto), despite the eruptive mechanism being dominantly phreatic. Juvenile clasts are more abundant higher in the tephra profiles, suggesting that juvenile magma was more involved later in the explosive sequence. Thermal and hydrologic modeling indicate that groundwater inflow into a short-lived, small-diameter volcanic conduit (10-m to 120-m-diameter used for modeling) during the 78–85 days preceding the first explosion provides a physically plausible mechanism for this eruptive sequence.

Hawaii↗
USGS2025

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology↗
USGS2025

3D viscoelastic models of slip-deficit rate along the Cascadia subduction zone

Interseismic deformation in the Pacific Northwest is constrained by the horizontal crustal velocity field derived from the Global Positioning System (GPS) in addition to vertical rates derived from GPS, leveling, and tide gauge measurements. Such measurements were folded in to deformation models of fault slip rates as part of the 2023 National Seismic Hazard Model (NSHM) update. Here I build upon one of the contributing models, the viscoelastic earthquake-cycle model of Pollitz [2022]. This model permits inclusion of effects of time-dependent viscoelastic relaxation within earthquake cycles (i.e., ‘ghost transients’) and laterally variable elastic and/or ductile material properties. I lever-age these capabilities to incorporate the Cascadia megathrust into Western U.S.-wide deformation models in which crustal fault slip rates are estimated simultaneously with slip deficit rates along the interplate boundary between the descending Juan de Fuca plate and North American plate. This effort includes construction of a margin-wide model of viscoelastic structure founded on the Slab 2.0 model and probes different models of the ductile properties of the surrounding oceanic asthenosphere, continental lower crust, and mantle asthenosphere. This results in new estimates of the distribution of slip deficit rate along the ∼ 1000 km long margin, highlights the importance of correcting for glacial-isostatic adjustment effects, and permits assessment of sensitivity of results to assumed ductile properties.

California, Oregon, Washington↗
USGS2025

Timescales of surface faulting preservation in low-strain intraplate regions from landscape evolution modeling and the geomorphic and historical record

Large surface-rupturing intraplate earthquakes in stable continental regions (SCRs) are uncommon globally and have recurrence intervals of thousands to hundreds of thousands of years based on the paleoseismic and geomorphic record, challenging accurate active fault identification in these regions. To constrain the timescales of preservation for scarps created by surface ruptures from dip-slip earthquakes, we use a two-dimensional scarp diffusion model for typical intraplate settings and explore which parameters influence fault scarp preservation. These parameters include the coseismic vertical surface offset, the recurrence interval of similar magnitude earthquakes, diffusivity (as a proxy for mean annual precipitation rate), and the erodibility of the surficial material. We constrain parameter ranges from a compilation of historical surface ruptures in intraplate settings in a variety of climates, including the Central and Eastern United States, Australia, Europe, Central Asia (Mongolia, China), India, and West Africa. The timescales of scarp preservation from landscape evolution modeling agree well with observations of scarp preservation in low-strain SCR and intraplate tectonic settings, with some notable exceptions for Australian scarps. We find that the erodibility of the surficial material and earthquake recurrence interval have a stronger effect on the timescales of scarp preservation than diffusivity or coseismic vertical surface offset. Our model results may aid in identifying and characterizing subtle, slow-moving active faults in low-strain SCR and intraplate tectonic settings for different tectonic, geomorphic, and climatic characteristics. Accurate fault locations and characterization from the landscape record has implications for both probabilistic seismic and fault displacement hazard analyses.

Journal of Geophysical Research Solid Earth↗
USGS2025

A spatiotemporal deep learning approach for predicting daily air-water temperature signal coupling and identification of key watershed physical parameters in a montane watershed

Seasonal shifts from runoff to groundwater dominance influence daily headwater stream temperatures, especially where local groundwater input is strong. This input buffers temperature during hot periods, supporting cold-water habitats. Recent studies use air–water temperature signal metrics to identify zones of strong stream–groundwater connectivity. While Previous studies used air–water signal ratios as proxies for groundwater influence but were limited to specific sites and periods, without dynamic forecasting. This study is the first to forecast daily A r as a spatiotemporal signal using a Graph Convolutional Network–Long Short-Term Memory (GCN-LSTM) model. The model was trained using hydroclimate data (air temperature, precipitation, shortwave radiation, streamflow) and watershed physical features (e.g., sand content, slope). Results showed high predictive skill, achieving R 2 (NSE, RMSE) of 0.86 (0.73, 0.0004) for one-day-ahead to 0.52 (0.50, 0.0009) for seven-days ahead forecasts. Prior studies often have not explicitly incorporated spatial hydrogeologic drivers, but this model explicitly incorporates them to assess their impact on A r forecasting and stream-groundwater connectivity. Feature analysis identified mean sand, elevation, slope, clay, and TWI as key predictors of A r . Stronger groundwater signals appeared in hillslopes, elevations, and tributaries, highlighting watershed influence on streamflow. However, limitations include reliance on historical air–water temperature patterns for training and limited representation of extreme climate conditions. Despite these limitations, unlike previous studies relying on measured in-situ stream and air temperature, this study forecasts A r directly from climate and physiographic features after training, avoiding in-situ data requirements. Findings aiding predictions of stream ecosystem resilience.

New York↗
USGS2025

Total uncertainty quantification in inverse solutions with deep learning surrogate models

We propose an approximate Bayesian method for quantifying the total uncertainty in inverse partial differential equation (PDE) solutions obtained with machine learning surrogate models, including operator learning models. The proposed method accounts for uncertainty in the observations, PDE, and surrogate models. First, we use the surrogate model to formulate a minimization problem in the reduced space for the maximum a posteriori (MAP) inverse solution. Then, we randomize the MAP objective function and obtain samples of the posterior distribution by minimizing different realizations of the objective function. We test the proposed framework by comparing it with the iterative ensemble smoother and deep ensembling methods for a nonlinear diffusion equation with an unknown space-dependent diffusion coefficient. Among other applications, this equation describes the flow of groundwater in an unconfined aquifer. Depending on the training dataset and ensemble sizes, the proposed method provides similar or more descriptive posteriors of the parameters and states than the iterative ensemble smoother method. Deep ensembling underestimates uncertainty and provides less-informative posteriors than the other two methods. Our results show that, despite inherent uncertainty, surrogate models can be used for parameter and state estimation as an alternative to the inverse methods relying on (more accurate) numerical PDE solvers.

Journal of Computational Physics↗
USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗
USGS2025

Potential for continental scientific drilling to inform fault mechanics and earthquake science

Our understanding of fault mechanics and earthquake processes remains limited, largely due to minimal direct observations near active faults at seismogenic depths. This lack of data restricts our ability to accurately assess and mitigate both natural and human-induced seismic hazards. However, recent advancements in drilling capabilities and downhole sensing technologies offer an opportunity: the ability to observe the physical conditions within a volume near active fault zones. In this contribution, we highlight how scientific drilling can provide access to the near-fault environment, enabling measurements of the stress, temperature, fluid pressure, and rock properties at depths where ruptures initiate, propagate, and arrest. These observations are essential to refine models of earthquake nucleation and dynamic rupture, bridging gaps between laboratory experiments, numerical simulations, and surface observations. These insights can advance fundamental understanding in earthquake science but also support the development of more effective seismic hazard assessments and risk mitigation strategies.

Seismica↗
USGS2025

Avian navigation: Comparing the olfactory navigational “map” and the infrasound direction-finding hypotheses to aeronautics

Animal navigation has long been a fascinating but bewildering subject. Humans and animals might well share similar navigational strategies because they developed within the same physical environments. A “map-and-compass” model has been proposed to explain the two-step avian navigational process, but the “map” step has remained elusive. Although scalar values from bicoordinate geomagnetic or atmospheric olfactory gradients have been considered foundational to the avian map, neither has proved convincing engendering decades of controversy. The olfactory map, and an alternative infrasound direction-finding (IDF) hypothesis, are discussed in this review. The olfactory map hypothesis currently requires extensive stable gradients of trace-odor ratios, but such gradients are highly unlikely within a turbulent and rapidly mixed lower atmosphere. The IDF hypothesis, on the other hand, postulates a two-step navigational model analogous to the maritime and aeronautical radio direction-finding technique. This review was also written to encourage further investigation, and direct testing, of the acoustic navigational process. The IDF hypothesis, at present, appears the better explanation of observed avian navigational behavior and accuracy within the atmosphere’s physical environment.

Journal of Comparative Physiology A↗
USGS2025

Probing lower-crustal fault properties with frequency-dependent tidal tremor triggering

The way seismicity responds to periodic stress perturbations offers crucial insights into the processes that can trigger an earthquake. Laboratory and theoretical analyses have shown that the period of imposed forcing and source properties affect the sensitivity to triggering, but frequency-dependent triggering of tectonic faults is poorly understood. The rate of low-frequency earthquakes (LFEs) near Parkfield, California has been found to be strongly correlated with solid earth tides. Tidal forcing acts over multiple frequencies, and the sensitivity to tidal triggering of LFEs therefore provides a unique opportunity to probe the physics of earthquake triggering and underlying fault properties. Here, we find that the response of LFEs to solid earth tides at diurnal and semi-diurnal frequencies is highly variable but spatially coherent along the San Andreas Fault. Using rate-state friction modeling, we find that the variation of the amplitude of tidal modulation is mainly affected by the spatial variation of the background effective normal stress, whereas the spatially varied tidal modulation at diurnal and semi-diurnal frequencies is mainly affected by the fault frictional property. The spatial variations of the LFE response reveal a heterogeneous lower-crustal geologic structure and complex physical faulting processes below the rupture zone of eventual great earthquakes.

California↗
USGS2026

Orientation dependence of probabilistic seismic hazard estimates from CyberShake physics-based simulations

Earthquake ground‐motion intensities, such as pseudospectral accelerations (SAs), can vary significantly with horizontal orientation. However, conducting probabilistic seismic hazard analysis (PSHA) for each horizontal orientation is challenging because current ground‐motion models used in PSHA consider only a single horizontal intensity value, usually the median across all orientations, known as RotD50. To address this limitation, we employ physics‐based simulations for PSHA, which contain full waveforms from which ground‐motion intensities can be computed for all horizontal orientations to study directional seismic hazard. We apply our approach to the latest CyberShake study of the Greater Los Angeles metropolitan area, developed by the Statewide California Earthquake Center, finding that seismic hazard at a 2475‐yr return period, a common value used for earthquake‐resistant design, varies significantly with horizontal orientation. For instance, for SAs at 3 s, the maximum seismic hazard across all horizontal orientations is, on average, 15% higher than the median RotD50 hazard, with these differences becoming more pronounced at longer periods. These observed variations can generally be attributed to physical mechanisms that polarize seismic waves, such as the radiation pattern of the earthquake source and the influence of the subsurface structure. These results may have important implications for earthquake engineering applications, particularly for long‐period structures in areas with substantial horizontal variations in seismic hazard.

California↗
USGS2026

A temporal look at the influence of topographic amplification on earthquake-triggered landslides in 3D seismic simulations

Earthquakes are a primary trigger for landslides, often leading to catastrophic consequences. While numerous studies have explored the spatial distribution of earthquake-triggered landslides, understanding the interaction between seismic waves and topography remains a critical challenge. Topographic irregularities can cause seismic wave amplification, altering ground shaking, and can trigger landslides that are challenging for predictive models to anticipate. This study investigates the spatial and temporal evolution of topographically amplified landslides, focusing on coseismic landslides triggered by the Mw 7.5 mainshock of the 2018 Papua New Guinea earthquake and post-seismic landslides associated with its four aftershocks, each exceeding Mw 6.0. We employ low-frequency, three-dimensional numerical ground shaking simulations and data-driven multivariate analyses to examine how landslides evolved from the coseismic to post-seismic periods. Our findings reveal a spatial shift in landslide distribution, in which the mainshock triggered slope failures predominantly on steep hillslopes, and the aftershocks triggered landslides on gentler slopes, often near geologic boundaries. We attribute this transition partly to the earthquake legacy effect of the mainshock, where the mainshock caused weakening of these hillslopes, making them more prone to failure when aftershocks occur. Additionally, the concentration of failures along geologic contacts in the post-seismic phase suggests that site amplification, stemming from contrasts in subsurface materials, exerts a key influence on landslide occurrence. Although not explicitly captured in our current numerical simulations, this mechanism warrants further investigation for more accurate hazard modeling.

JGR Solid Earth↗
USGS2026

A review and synthesis of post-wildfire shifts in hydrologic processes and streamflow generation mechanisms

Critical water supply watersheds in the western United States (WUS) are impacted by wildfires, with potential negative effects on water quality and quantity. Scientific understanding is currently insufficient to deliver estimates of wildfire consequences for water quantity that are regionally accurate. Regional variability in the directionality and magnitude of post-wildfire shifts in streamflow generation fuels uncertainty in estimates of wildfire effects on water supply. In this work we provide a narrative review of wildfire effects on hydrologic processes and the resulting changes in streamflow generation mechanisms with a focus on the WUS, incorporating other global regions when pertinent. A conceptual model summary of wildfire effects on streamflow generation emphasizes: (1) precipitation seasonality, (2) synchrony of precipitation and potential evapotranspiration, (3) net shifts in interception, evaporation, and transpiration relative to total annual precipitation, (4) vegetation changes, including compensatory uptake and type conversion, (5) degree of overlap in rainfall rates and infiltration, (6) fire extent and severity, (7) burn scar positioning (e.g. in headwaters or proximal to watershed outlet), (8) scale-dependent groundwater leakage, (9) near-surface water storage reduction, and (10) soil to groundwater connectivity. Ongoing gaps and challenges include separating the influences of precipitation variability, water withdrawals, and post-fire land management; compound and overlapping disturbances; and lack of pre-fire data. Notable future opportunities include: harnessing ever-improving gridded and remotely sensed precipitation and fire-effects data; linking geophysical, isotopic tracer, and geochemical signatures to diagnose hydrologic changes; leveraging physically based and data-driven model advancements; and analyzing streamflow generation recovery trajectories across diverse watersheds.

western United States↗
USGS2025

To heal or not to heal?: 2. The moment-recurrence time behavior of repeating earthquakes in the 2011 Prague, Oklahoma aftershock sequence is consistent with laboratory healing rates

The timing and failure conditions of an earthquake are governed by the interplay between fault reloading and restrengthening. The moment-recurrence time behavior of repeating earthquakes can give observational estimates of fault healing rates; however, it is difficult to link these observed healing rates to laboratory studies of frictional healing in part because of uncertainty in lithology. Here, we study the 2011 Prague earthquake sequence, which includes repeating earthquakes in the Arbuckle group and the granitic basement, and compare them to laboratory experiments on samples of the Arbuckle and Troy granite (representative of the basement rock) (Okamoto et al., 2025, https://doi.org/10.1029/2024JB030573 ). We find three spatially distinct groups of repeating earthquakes with different moment-recurrence behavior: (a) constant moment-recurrence time in the Arbuckle group, (b) scattered moment-recurrence time at the intersection of the foreshock-mainshock fault in the granitic basement, and (c) moment-predictable behavior outside of the foreshock-mainshock fault intersection also in the granitic basement. Our observation of stagnant healing for repeating sequences in the Arbuckle group is consistent with laboratory observations of low healing rates for moderately high pore fluid pressures in Arbuckle samples. For the moment-predictable group, the source radius that is required in order to match healing rates is consistent with source radius estimations when taking into account reasonable attenuation of the P- pulse width. Overall, we observe diverse healing behaviors in the seismic families that are consistent with laboratory healing rates, providing seismic evidence that contact-scale frictional mechanisms are relevant to large-scale earthquake dynamics.

Oklahoma↗
USGS2026

Thermal detectability of subsurface water ice on Mars: A comparative analysis for the Subsurface Water Ice Mapping (SWIM) Project

We have developed a new global map of shallow ground ice distribution, SWIM23, based on Mars Global Surveyor Thermal Emission Spectrometer data and made systematic comparisons between this new map and two similar, previously developed data products. We have explored the origin of differences between the three ice maps by detailing technical and procedural differences in their development, by making global pixel-by-pixel comparisons, and by carrying out a series of one-dimensional thermal simulations to explore fundamental physical limitations of thermal ice-detection techniques. These efforts and the production of a composite thermal ice-consistency map supported integration of multiple geophysical data products relevant to ice detection in the upper meter of the Martian regolith into the larger Mars Subsurface Water Ice Mapping project. Our work also highlights fundamental physical limitations to thermal ice detection as a technique, particularly the rapid fall-off in ice detection sensitivity at depths >30 cm, which produces maximum uncertainty in the presence and depth of ice within regions preferred for potential human landing sites. A future Mars orbiter mission designed to detect ice and support crewed landing site selection in the midlatitude region should give payload priority to an instrument capable of probing the 1–5 m depth range (i.e., a high-frequency radar), over a next-generation thermal spectrometer, which is unlikely to offer clarity on ice table depths or lateral continuity of the ice table in the locations of highest interest.

Planetary Science Journal↗
USGS2025

Deterministic physics-based earthquake sequence simulators match empirical ground-motion models and enable extrapolation to data poor regimes: Application to multifault multimechanism ruptures

We use the deterministic earthquake simulator RSQSim to generate complex sequences of ruptures on fault systems used for hazard assessment. We show that the source motions combined with a wave propagation code create surface ground motions that fall within the range of epistemic uncertainties for the Next Generation Attenuation‐West2 set of empirical models. We show the model is well calibrated where there are good data constraints, and has good correspondence in regions with fewer data constraints. We show magnitude, distance, and mechanism dependence all arising naturally from the same underlying friction. The deterministic physics‐based approach provides an opportunity for better understanding the physical origins of ground motions. For example, we find that reduced stress drops in shallow layers relative to constant stress drop with depth lead to peak ground velocities in the near field that better match empirical models. The simulators may also provide better extrapolations into regimes that are poorly empirically constrained by data because physics, rather than surface shaking data parameterizations, is underlying the extrapolations. Having shown the model is credible, we apply it to a problem where observations are lacking. We examine the case of crustal faults above a shallow subduction interface seen to break coseismically in simulations of the New Zealand fault system. These types of events were left out of consideration in the most recent New Zealand national seismic hazard model due to the modeling complexity and lack of observational data to constrain ground‐motion models (GMMs). Here, we show that in the model, by breaking up the coseismic crustal and interface rupturing fault motions into two separate subevents, and then recombining the resulting ground‐motion measures in a square‐root‐of‐sum‐of‐squares incoherent manner, we reproduce well the ground‐motion measures from the full event rupture. This provides a new method for extrapolating GMMs to more complex multifault ruptures.

Seismological Research Letters↗