USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Sedimentary Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS2007

Field test comparison of an autocorrelation technique for determining grain size using a digital 'beachball' camera versus traditional methods

This extensive field test of an autocorrelation technique for determining grain size from digital images was conducted using a digital bed-sediment camera, or 'beachball' camera. Using 205 sediment samples and >1200 images from a variety of beaches on the west coast of the US, grain size ranging from sand to granules was measured from field samples using both the autocorrelation technique developed by Rubin [Rubin, D.M., 2004. A simple autocorrelation algorithm for determining grain size from digital images of sediment. Journal of Sedimentary Research, 74(1): 160-165.] and traditional methods (i.e. settling tube analysis, sieving, and point counts). To test the accuracy of the digital-image grain size algorithm, we compared results with manual point counts of an extensive image data set in the Santa Barbara littoral cell. Grain sizes calculated using the autocorrelation algorithm were highly correlated with the point counts of the same images (r2 = 0.93; n = 79) and had an error of only 1%. Comparisons of calculated grain sizes and grain sizes measured from grab samples demonstrated that the autocorrelation technique works well on high-energy dissipative beaches with well-sorted sediment such as in the Pacific Northwest (r2 ??? 0.92; n = 115). On less dissipative, more poorly sorted beaches such as Ocean Beach in San Francisco, results were not as good (r2 ??? 0.70; n = 67; within 3% accuracy). Because the algorithm works well compared with point counts of the same image, the poorer correlation with grab samples must be a result of actual spatial and vertical variability of sediment in the field; closer agreement between grain size in the images and grain size of grab samples can be achieved by increasing the sampling volume of the images (taking more images, distributed over a volume comparable to that of a grab sample). In all field tests the autocorrelation method was able to predict the mean and median grain size with ???96% accuracy, which is more than adequate for the majority of sedimentological applications, especially considering that the autocorrelation technique is estimated to be at least 100 times faster than traditional methods.

Sedimentary Geology↗
USGS1991

High-energy carbonate-sand accumulation, the Quicksands, southwest Florida Keys

High-resolution seismic-reflection profiles of the Quicksands, located along a broad ridge on the platform shelf west of Key West, Florida, indicate a significant deposit of non-oolitic carbonate sand occurs in a belt 47 km long by 28 km wide. The surface of the belt is ornamented by large (5 m), migrating tidal bars, oriented in a north-south direction, on which sand waves, oriented in an east-west direction, are superimposed. Some of the sand waves are awash at low tide. The sand waves are formed by strong reversing tidal currents flowing between the Gulf of Mexico and the Straits of Florida. The waves migrate directly over Pleistocene bedrock to the east, but the deposit thickens to the west and sand waves there overlie non-oolitic Holocene accumulations as thick as 12 m. Westward-dipping accretionary bedding indicates that net migration of the sands is to the west, despite north-south movement of tidal currents. The westward edge of the accumulation has accreted over deeper, muddier deposits. Although tidal currents and resultant bedforms appear identical to those of active ooid deposits in the Bahamas and elsewhere, no oolitically coated grains were found in this study. Thin-section analyses show the principal component (average 48%) of the sands is fragmented plates of species of the green alga Halimeda , followed by particulate coral (average 17%), which increases off the flanks of the main sand body. Short vibracores confirm the presence of cross-bedding.

Florida↗
USGS1998

Quantitative controls on location and architecture of carbonate depositional sequences: upper miocene, cabo de gata region, se Spain

Sequence stratigraphy, pinning-point relative sea-level curves, and magnetostratigraphy provide the quantitative data necessary to understand how rates of sea-level change and different substrate paleoslopes are dominant controls on accumulation rate, carbonate depositional sequence location, and internal architecture. Five third-order (1-10 my) and fourth-order (0.1-1.0 my) upper Miocene carbonate depositional sequences (DS1A, DS1B, DS2, DS3, TCC) formed with superimposed higher-frequency sea-level cycles in an archipelago setting in SE Spain. Overall, our study indicates when areas of high substrate slope (>15 degrees ) are in shallow water, independent of climate, the location and internal architecture of carbonate deposits are not directly linked to sea-level position but, instead, are controlled by location of gently sloping substrates and processes of bypass. In contrast, if carbonate sediments are generated where substrates of low slope (<15 degrees in our area) are in shallow water, then architecture and location of deposits may be more directly controlled by the relative position of sea level. For these systems, the rates of relative sea-level change are important for determining which systems tracts develop. DS1A-DS1B, cooler-water ramps, result from sediment bypass across steep paleoslopes to toes of slopes. Accumulation rates decreased from >15.6 cm/ky to approximately 2 cm/ky and overall relative sea level rose at rates of 17-21.4 cm/ky. Higher frequency sea-level rates were about 111 to more than 260 cm/ky, producing onlapping, fining- (deepening-) upward cycles. Decreasing accumulation rates resulted from decreasing surface area for shallow-water sediment production, drowning of shallow-water substrates, and complex sediment dispersal related to the archipelago setting. Typical systems tract and parasequence development should not be expected in "bypass ramp" settings; facies of onlapping strata do not track base level and are likely to be significantly different compared to onlapping strata associated with coastal onlap. Basal and upper DS2 reef megabreccias (indicating the transition from cool to warmer climatic conditions) were eroded from steep upslope positions and redeposited downslope onto areas of gentle substrate during rapid sea-level falls (>22.7 cm/ky) of short duration. Such rapid sea-level falls and presence of steep slopes are not conducive to formation of forced regressive systems tracts composed of down-stepping reef clinoforms. The DS3 reefal platform formed where shallow water coincided with gently sloping substrates created by earlier deposition. Slow progradation (0.39-1.45 km/my) is best explained by the lack of an extensive bank top, progressively falling sea level, and low productivity resulting from siliciclastic debris and excess nutrients shed from nearby volcanic islands. Although DS3 strata were deposited during a third-order relative sea-level cycle, a typical transgressive systems tract is not recognizable, indicating that the initial relative rise in sea level was too rapid (>>19 cm/ky). Downstepping reefs, forming a forced regressive systems tract, were deposited during the relative sea-level fall at the end of DS3, indicating that relatively slow rates of fall (10 cm/ky or less) over favorable paleoslope conditions are conducive to generation of forced regressive systems tracts consisting of downstepping reef clinoforms. The TCC sequence consists of four shallow-water sedimentary cycles that were deposited during a 400 ky to 100 ky time span. Such shallow-water cycles, typical of many platforms, form only where shallow water intersects gently sloping substrates. The relative thicknesses of cycles (<2 m to 15 m thick), magnitudes of relative sea-level fluctuations associated with each cycle (25-30 m), high rates of relative sea-level fluctuations (minimum of 25-120 cm/ky), and the widespread distribution of similar TCC cycles in the Mediterranean and elsewhere are supportive of a glacio-eustatic influence. With rates of sea-level change so high, typical systems tracts do not form.

Journal of Sedimentary Research↗
USGS2010

Correlation of aptian-albian carbon isotope excursions in continental strata of the cretaceous Foreland Basin, Eastern Utah, U.S.A.

Nodular carbonates ("calcretes") in continental foreland-basin strata of the Early Cretaceous Cedar Mountain Formation (CMF) in eastern Utah yield ??13C and ??O records of changes in the exogenic carbon cycle related to oceanic anoxic events (OAEs), and terrestrial paleoclimate. Chemostratigraphic profiles of both forebulge and foredeep sections show two prominent positive ??13C excursions, each with a peak value of -3% VPDB, and having background ??13C values of about -6% VPDB. These excursions correlate with the global early Aptian (Ap7) and late Aptian-early Albian (Apl2-All) carbon isotope excursions. Aptian-Albian positive ??13C excursions in the CMF also correspond to 3-4 per mil increases in carbonate ??18O. These phenomena record local aridification events. The chemostratigraphic profile on the thinner forebulge section of the CMF is calibrated, for the first time, by a radiogenic U-Pb date of 119.4 ?? 2.6 Ma on a carbonate bed, and by detrital zircon U-Pb dates on two bounding sandstone units (maximum depositional ages of 146 Ma and 112 Ma). P??trographie observations and diagenetic analyses of micritic to microsparitic carbonates from nodules indicate palustrine origins and demonstrate that they crystallized in shallow early meteoric phreatic environments. Meteoric calcite lines derived from CMF carbonates have ??18O values ranging between -8.1 to -7.5%o VPDB, supporting an estimate of zonal mean groundwater ??18O of -6% VSMOW for an Aptian-Albian paleolatitude of 34?? N. Furthermore, our two chemostratigraphic profiles exhibit a generally proportionate thinning of correlative strata from the foredeep on to the forebulge, suggesting that there were consistently lower rates of accumulation on the forebulge during the Aptian-Albian. Identification of the global Aptian-Albian ??13C excursions in purely continental strata, as demonstrated in this paper, opens a new avenue of research by identifying specific stratigraphie intervals that record the terrestrial paleoclimatic impacts of perturbations of the global carbon cycle. Copyright ?? 2010, SEPM (Society for Sedimentary Geology).

Journal of Sedimentary Research↗
USGS1993

Digital imaging of sediment cores for archives and research

A system is described for digitally imaging split sediment cores that is relatively inexpensive, simple, and provides an image of the core that can be used for quantitative measurements as well as for archiving. The system is composed of a Macintosh computer equipped for 24-bit color, a large-volume storage medium, a Hi-8 video camera, and a digital framegrabber.

Journal of Sedimentary Research↗
USGS1982

A new instrument for sampling flocculent material at the water/sediment interface

We have designed an instrument to collect fine-grained and flocculent material from the water/sediment interface for chemical and mineralogical analysis. The sampler can be used from a manned research submersible or by a diver in shallow water. In areas of active deposition, the material collected represents the most recently deposited sediment. This material is of interest for determining the concentration of anthropogenic contaminants at the sea floor and may be a much more sensitive indicator of early contamination than are bulk samples collected by means of conventional grab samplers or corers. The instrument also may be well suited for sampling freshly flocculated or precipitated material from the sea floor, for example in estuaries or around thermal vents on mid ocean ridges.

Journal of Sedimentary Research↗
USGS2022

Sedimentary geochemistry of deepwater slope deposits in southern Lake Tanganyika (East Africa): Effects of upwelling and minor lake level oscillations

Lake Tanganyika ranks among the most valuable modern analogs for understanding depositional processes of carbonaceous sediments in ancient tropical rifts. Prior research on Lake Tanganyika has emphasized the importance of bottom-water anoxia, depositional processes (hemipelagic settling versus gravity flows), and large-scale (100s of meters) lake level change on the quality of sedimentary organic matter content. Here, facies analysis and numerous organic geochemical tools (elemental, carbon isotope, and programmed pyrolysis) were applied to a radiocarbon-dated core from southern Lake Tanganyika to investigate the accumulation of carbonaceous sediments in a deepwater slope environment influenced by high-frequency climatic fluctuations accompanied by only minor (10s of meters) lake level changes. Considerable variability in lithofacies and geochemistry characterizes the ∼ 1030-year-long core record, chiefly driven by climate-mediated changes to the lake's upwelling system. Laminated diatom oozes and sapropels with mean total organic carbon (TOC) concentrations and hydrogen indices of 6.9 wt.% and 385 mg hydrocarbon/g TOC, respectively, characterize sediments deposited during periods of strong upwelling and variable water levels. Silty sediments deposited via gravity-flow processes were likewise rich in organic matter, likely due to preservation-enhancing bottom-water anoxia. Dilution by reworked tephra was the chief constraint on organic enrichment at the study site. Data from this study reveal that oscillations in atmospheric and limnological processes in the absence of major shoreline movements can result in geochemically diverse deepwater slope sediments, which have implications for improving depositional models of petroliferous continental rift basins.

Journal of Sedimentary Research↗
USGS2002

High-precision measurements of wetland sediment elevation. I. Recent improvements to the sedimentation--erosion table

The sedimentation-erosion table (SET) developed by Boumans and Day (1993) is herein renamed the surface elevation table (SET) to better reflect the conceptual view of the processes being measured. The SET was designed for making high-resolution measurements of small-scale changes in elevation of loose, unconsolidated sediments in shallow water and mudflat habitats. The SET has undergone three major improvements to increase precision and so that it can be used to measure sediment elevation in vegetated wetlands as well as shallow water habitats. The remote-release 'sliding plate' mechanism has been replaced with a single plate, collars (first 2.5 cm then 7.5 cm in length) have been attached to the plate to reduce play in the placement of the measuring pins, and the brass measuring pins have been replaced with fiberglass pins to reduce bending and consequent loss of precision. Under ideal laboratory conditions, the 95% confidence limit for individual pin measurements averaged about A? 1.4 mm (range A? 0.7 to A? 1.9 mm). These modifications have resulted in a reduction of error by about 50%.

Journal of Sedimentary Research↗
USGS2002

High-precision measurements of wetland sediment elevation. II The rod surface elevation table

A new high-precision device for measuring sediment elevation in emergent and shallow water wetland systems is described. The rod surface-elevation table (RSET) is a balanced, lightweight mechanical leveling device that attaches to both shallow (< 1 m) and deep (driven to refusal) rod bench marks. The RSET was built to complement the surface-elevation table (SET), a larger and heavier mechanical leveling device first described by Boumans and Day (1993). Because of its size and weight, the SET must be attached to a pipe bench mark, which typically must be driven to a depth > 1 m in order to be stable. The pipe is driven to refusal but typically to a depth shallower than the rod bench mark because of greater surface resistance of the pipe. Thus, the RSET makes it possible to partition change in sediment elevation over shallower (e.g., the root zone) and deeper depths of the sediment profile than is possible with the SET. The confidence intervals for the height of an individual pin measured by two different operators with the RSET under laboratory conditions were A? 1.0 and A? 1.5 mm. Under field conditions, confidence intervals for the measured height of an individual pin ranged from A? 1.3 mm in a mangrove forest up to A? 4.3 mm in a salt marsh.

Journal of Sedimentary Research↗
USGS2000

A method for measuring vertical accretion, elevation, and compaction of soft, shallow-water sediments

High-resolution measures of vertical accretion, elevation, and compaction of shallow-water sediments are fundamental to understanding the processes that control elevation change and the mechanisms of progradation (e.g., development of mudflats and intertidal wetlands) in coastal systems. Yet, measurements of elevation by traditional survey methods often are of low accuracy because of the compressible nature of the substrates. Nor do they provide measures of vertical accretion or sediment compaction. This paper evaluates the use in shallow-water systems of an approach designed to measure these variables in vegetated wetlands. The approach employs simultaneous measures of elevation from temporary benchmarks using a sedimentation-erosion table (SET) and vertical accretion from marker horizons with sediment cores collected with a cryogenic coring apparatus. The measures are made with a level of resolution sufficient to distinguish between the influence of surface and subsurface processes on elevation, thus providing quantitative estimates of shallow subsidence. The SET-marker horizon approach was evaluated on a developing splay created by an artificial crevasse of a distributary in the Mississippi River delta. The approach provided high-resolution measures of vertical accretion (48.3 ' 2.0 cm.) and elevation (36.7 ' 1.6 cm) over a 4-year period, with the difference between the two indicating the amount of shallow subsidence. In addition, by laying new marker horizons in later years, the approach provided rates not only of shallow subsidence (3.9 ' 0.5 cm y-1) but also compaction of newly deposited seiments (2.1 ' 0.6 cm y-1) and compaction of underlying sediments (1.8 ' 2.0 cm y-1 ) over a two-year period. Hence, the SET-marker horizon approach has widespread applicability in both emergent wetland and shallow water environments for providing high resolution measures of the processes controlling elevation change.

Journal of Sedimentary Research↗
USGS2004

Annual layers revealed by GPR in the subsurface of a prograding coastal barrier, southwest Washington, U.S.A

The southwest Washington coastline has experienced extremely high rates of progradation during the late Holocene. Subsurface stratigraphy, preserved because of progradation and interpreted using ground-penetrating radar (GPR), has previously been used successfully to document coastal response to prehistoric storm and earthquake events. New GPR data collected at Ocean Shores, Washington, suggest that the historic stratigraphy of the coastal barrier in this area represents a higher resolution record of coastal behavior than previously thought. GPR records for this location at 200 MHz reveal a series of gently sloping, seaward-dipping reflections with slopes similar to the modern beach and spacings on the order of 20-45 cm. Field evidence and model results suggest that thin (1-10 cm), possibly magnetite-rich, heavy-mineral lags or low-porosity layers left by winter storms and separated by thick (20-40 cm) summer progradational sequences are responsible for generating the GPR reflections. These results indicate that a record of annual progradation is preserved in the subsurface of the prograding barrier and can be quantified using GPR. Such records of annual coastal behavior, where available, will be invaluable in understanding past coastal response to climatic and tectonic forcing.

Washington↗
USGS2001

Modern sedimentation on the shoreface and inner continental shelf at Wrightsville Beach, North Carolina, U.S.A

The geologic framework and surficial morphology of the shoreface and inner continental shelf off the Wrightsville Beach, North Carolina, barrier island were mapped using high-resolution sidescan-sonar, bathymetric, and seismic-reflection surveying techniques, a suite of over 200 diver vibracores, and extensive seafloor observations by divers. The inner shelf is a sediment-starved, active surface of marine erosion; modern sediments, where present, form a patchy veneer over Tertiary and Quaternary units. The lithology of the underlying units exerts a primary control on the distribution, texture, and composition of surficial sediments, as well as inner-shelf bathymetry. The shoreface is dominated by a linear, cross-shore morphology of rippled scour depressions (RSDs) extending from just seaward of the surf zone onto the inner shelf. On the upper shoreface, the RSDs are incised up to 1 m below surrounding areas of fine sand, and have an asymmetric cross section that is steeper-sided to the north. On the inner shelf, the RSDs have a similar but more subdued cross-sectional profile. The depressions are floored primarily by shell hash and quartz gravel. Vibracore data show a thick (up to 1.5 m) sequence of RSD sediments that unconformably overlies ancient coastal lithosomes. In this sediment-starved inner shelf setting, rippled scour depressions probably form initially on preexisting coarse-sediment substrates such as modern lag deposits of paleofluvial channel lithosomes or ancient tidal inlet thalwegs. Interannual observations of seafloor morphologic change and the longer-term record contained in vibracores suggest that the present seafloor morphology is either relatively stable or represents a recurring, preferential morphologic state to which the seafloor returns after storm-induced perturbations. The apparent stability is interpreted to be the result of interactions at several scales that contribute to a repeating, self-reinforcing pattern of forcing and sedimentary response which ultimately causes the RSDs to be maintained as sediment-starved bedforms responding to both along-shore and across-shore flows. Sediment accumulation from over 30 years of extensive beach nourishment at Wrightsville Beach appears to have exceeded the local shoreface accommodation space, resulting in the "leaking" of beach and shoreface sediment to the inner shelf. A macroscopically identifiable beach nourishment sediment on the shoreface and inner shelf was used to identify the decadal-scale pattern of sediment dispersal. The nourishment sediment is present in a seaward-thinning wedge that extends from the beach over a kilometer onto the inner shelf to waters depths of 14 m. This wedge is best developed offshore of the shoreline segment that has received the greatest volume of beach nourishment.

North Carolina↗
USGS2002

Plotting equation for Gaussian percentiles and a spreadsheet program for generating probability plots

Two-dimensional plotting tools can be of invaluable assistance in analytical scientific pursuits, and have been widely used in the analysis and interpretation of sedimentologic data. We consider, in this work, the use of arithmetic probability paper (APP). Most statistical computer applications do not allow for the generation of APP plots, because of apparent intractable nonlinearity of the percentile (or probability) axis of the plot. We have solved this problem by identifying an equation(s) for determining plotting positions of Gaussian percentiles (or probabilities), so that APP plots can easily be computer generated. An EXCEL example is presented, and a programmed, simple-to-use EXCEL application template is hereby made publicly available, whereby a complete granulometric analysis including data listing, moment measure calculations, and frequency and cumulative APP plots, is automatically produced.

Journal of Sedimentary Research↗
USGS2003

Quaternary sedimentation and subsidence history of Lake Baikal, Siberia, based on seismic stratigraphy and coring

The long, continuous, high-latitude, stratigraphic record of Lake Baikal was deposited in three broad sedimentary environments, defined by high-resolution seismic-reflection and coring methods: (1) turbidite depositional systems, by far the most widespread, characterizing most of the margins and floors of the main basins of the lake, (2) large deltas of major drainages, and (3) tectonically or topographically isolated ridges and banks. Holocene sedimentation rates based on radiocarbon ages vary by more than an order of magnitude among these environments, from less than about 0.03 mm/yr on ridges and banks to more than about 0.3 mm/yr on basin floors. Extrapolating these rates, with a correction for compaction, yields tentative estimates of about 25 and 11 Ma for the inception of rifting in the Central and North basins, respectively, and less than 6 Ma for the 200-m sediment depth on Academician Ridge. The Selenga Delta has the distinctive form of a classic prograding Gilbert-type delta, but its history appears to represent a complex combination of tectonism and sedimentation. The central part of the delta is underlain by prograding, shallow-water sequences, now several hundred meters below the lake surface. These deposits and much of the delta slope are mantled by fine-grained, deep-water, hemipelagic deposits whose base is estimated to be about 650,000 years old. Modern coarse-grained sediment bypasses the delta slope through fault-controlled canyons that feed large, subaqueous fans at the ends of the South and Central basins. These relations, along with abundant other evidence of recent faulting and the great depths of the Central and South basins, suggest that these two rift basins have experienced a period of unusually rapid subsidence over the last 650,000 years, during at least part of which sedimentation has failed to keep pace.

Lake Baikal↗
USGS2004

A simple autocorrelation algorithm for determining grain size from digital images of sediment

Autocorrelation between pixels in digital images of sediment can be used to measure average grain size of sediment on the bed, grain-size distribution of bed sediment, and vertical profiles in grain size in a cross-sectional image through a bed. The technique is less sensitive than traditional laboratory analyses to tails of a grain-size distribution, but it offers substantial other advantages: it is 100 times as fast; it is ideal for sampling surficial sediment (the part that interacts with a flow); it can determine vertical profiles in grain size on a scale finer than can be sampled physically; and it can be used in the field to provide almost real-time grain-size analysis. The technique can be applied to digital images obtained using any source with sufficient resolution, including digital cameras, digital video, or underwater digital microscopes (for real-time grain-size mapping of the bed). ?? 2004, SEPM (Society for Sedimentary Geology).

Journal of Sedimentary Research↗
USGS2003

Interplay of late Cenozoic siliciclastic supply and carbonate response on the southeast Florida platform

High-resolution seismic-reflection data collected along the length of the Caloosahatchee River in southwestern Florida have been correlated to nannofossil biostratigraphy and strontium-isotope chemostratigraphy at six continuously cored boreholes. These data are interpreted to show a major Late Miocene(?) to Early Pliocene fluvial-deltaic depositional system that prograded southward across the carbonate Florida Platform , interrupting nearly continuous carbonate deposition since early in the Cretaceous. Connection of the platform top to a continental source of siliciclastics and significant paleotopography combined to focus accumulation of an immense supply of siliciclastics on the southeastern part of the Florida Platform . The remarkably thick (> 100 m), sand-rich depositional system, which is characterized by clinoformal progradation, filled in deep accommodation, while antecedent paleotopography directed deltaic progradation southward within the middle of the present-day Florida Peninsula. The deltaic depositional system may have prograded about 200 km southward to the middle and upper Florida Keys, where Late Miocene to Pliocene siliciclastic form the foundation of the Quaternary carbonate shelf and shelf margin of the Florida Keys. These far-traveled siliciclastic deposits filled accommodation on the southeastern part of the Florida Platform so that paleobathymetry was sufficiently shallow to allow Quaternary recovery of carbonate sedimentation in the area of southern peninsular Florida and the Florida Keys.

Florida↗
USGS2004

Holocene reef development where wave energy reduces accommodation

Analyses of 32 drill cores obtained from the windward reef of Kailua Bay, Oahu, Hawaii, indicate that high wave energy significantly reduced accommodation space for reef development in the Holocene and produced variable architecture because of the combined influence of sea-level history and wave exposure over a complex antecedent topography. A paleostream valley within the late Pleistocene insular limestone shelf provided accommodation space for more than 11 m of vertical accretion since sea level flooded the bay 8000 yr BP. Virtually no net accretion (<1 m) took place on surrounding Pleistocene substrates shallower than 10 m. Holocene reef accretion ocurred in three stages: (1) an early stage of catch-up framestone development in water depths of 11-17 m, (2) an intermediate stage characterized by either no accretion or by the pile-up of fore-reef-derived rubble (rudstone) and sparse bindstone, and (3) a final stage of catch-up bindstone accretion in depths > 6 m. Coral framestone accreted at rates of 2.5-6.0 mm/yr in water depths > 11 m during the early Holocene; it abruptly terminated at ~4500 yr BP because of wave scour as sea level stabilized. More than 4 m of rudstone derived from the upper fore reef accreted at depths of 6 to 13 m below sea level between 4000 and 1500 yr BP coincident with late Holocene relative sea-level fall. Variations in the thickness, composition, and age of these reef facies across spatial scales of 10-1000 m within Kailua Bay illustrate the importance of antecedent topography and wave-related stress in reducing accommodation space for reef development set by sea level. Although accommodation space of 6 to 17 m has existed through most of the Holocene, the Kailua reef has been unable to catch up to sea level because of persistent high wave stress.

Hawai'i↗
USGS2003

A multi-level pore-water sampler for permeable sediments

The construction and operation of a multi - level piezometer (multisampler) designed to collect pore water from permeable sediments up to 230 cm below the sediment - water interface is described. Multisamplers are constructed from 1 1/2 inch schedule 80 PVC pipe. One-quarter-inch flexible PVC tubing leads from eight ports at variable depths to a 1 1/2 inch tee fitting at the top of the PVC pipe. Multisamplers are driven into the sediments using standard fence-post drivers. Water is pumped from the PVC tubing with a peristaltic pump. Field tests in Banana River Lagoon, Florida, demonstrate the utility of multisamplers. These tests include collection of multiple samples from the permeable sediments and reveal mixing between shallow pore water and overlying lagoon water .

Journal of Sedimentary Research↗