USGS ScienceSearch

SEARCH · USGS Science

Results for “Geographical Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

The Badain Jaran Desert: Remote sensing investigations.

Approximately half the Badain Jaran Desert in the north-western Alashan Plain of northern China is a sand sea. The remainder is gravel or bedrock. The north-western border of the desert is a playa. The desert has been imaged by both Landsat and the Shuttle Imaging Radar (SIR-A). Landsat analysis indicates there are two dune patterns in the sand sea, north-east oriented crescentic dunes along the northern and western borders, and complex star dunes in the central and eastern desert. Although the orientation and morphology of the dunes are easily visible on Landsat, they cannot be determined with the radar image obtained from the aspect angle used during the SIR-A mission. An abrupt change in wavelength of the dune pattern near the Badain Jaran Playa is mappable on Landsat, but not seen on the radar image. The playa appears to be considerably larger on radar than on the Landsat, and we may be seeing subsurface penetration of dry surficial sands with the radar. Archaeological evidence suggests the playa was the location of prehistoric and historic human activity. SIR-A data indicate the playa was formerly a considerably larger inland lake.

Badain Jaran Desert

Design of a spatial data structure using the relational normal forms

In previous work, a relational data structure aimed at the exchange of spatial data between systems was developed. As this data structure was relational it was of first normal form, but compliance with the higher normal forms was not investigated. Recently, a new procedural method for composing fully normalized data structures from the basic data fields has been developed by H. C. Smith, as an alternative to the process of non-loss decomposition which is difficult to understand. Smith's method has been applied to data fields required to store points, lines and polygons in a chain-node spatial data model. When geographic domain, coverage layer and map are also considered, the procedure naturally leads to a catalogue model, needed for the exchange of spatial data. Although the method produces a fully normalized data structure, it is not as easy to identify which normal forms are responsible for the ultimate arrangement of the data fields into relations, but the benefits of these criteria for data base development also apply to spatial data structures and related ancillary data.

International Journal of Geographical Information

Finite-element mesh generation from mappable features

A vector-based geographical information system (GIS) is used to generate a variably-sized triangular element finite-element mesh from mappable features. Important digitally-mapped features are automatically linked to nodes in the finite-element model, ensuring an efficient, virtually error-free alternative to the tedious process of mesh design and data-input preparation by other methods. The procedure permits the user to work interactively with graphically-displayed hydrologic information about the study area allowing different mesh sizes to be used as needed, based on hydrologic complexity. The mesh-generaiion programs are stand-alone macros within the GIS that set up the basic data defining a finite-element mesh for many different finite-element model programs.

International Journal of Geographical Information

Monitoring grasshopper and locust habitats in Sahelian Africa using GIS and remote sensing technology

Development programmes in Sahelian Africa are beginning to use geographic information system (GIS) technology. One of the GIS and remote sensing programmes introduced to the region in the late 1980s was the use of seasonal vegetation maps made from satellite data to support grasshopper and locust control. Following serious outbreaks of these pests in 1987, the programme addressed a critical need, by national and international crop protection organizations, to monitor site-specific dynamic vegetation conditions associated with grasshopper and locust breeding. The primary products used in assessing vegetation conditions were vegetation index (greenness) image maps derived from National Oceanic and Atmospheric Administration satellite imagery. Vegetation index data were integrated in a GIS with digital cartographic data of individual Sahelian countries. These near-real-time image maps were used regularly in 10 countries for locating potential grasshopper and locust habitats. The programme to monitor vegetation conditions is currently being institutionalized in the Sahel.

International Journal of Geographical Information

Geospatial data resampling and resolution effects on watershed modeling: A case study using the agricultural non-point source pollution model

Researchers have been coupling geographic information systems (GIS) data handling and processing capability to watershed and waterquality models for many years. This capability is suited for the development of databases appropriate for water modeling. However, it is rare for GIS to provide direct inputs to the models. To demonstrate the logical procedure of coupling GIS for model parameter extraction, we selected the Agricultural Non-Point Source (AGNPS) pollution model. Investigators can generate data layers at various resolutions and resample to pixel sizes to support models at particular scales. We developed databases of elevation, land cover, and soils at various resolutions in four watersheds. The ability to use multiresolution databases for the generation of model parameters is problematic for grid-based models. We used database development procedures and observed the effects of resolution and resampling on GIS input datasets and parameters generated from those inputs for AGNPS. Results indicate that elevation values at specific points compare favorably between 3- and 30-m raster datasets. Categorical data analysis indicates that land cover classes vary significantly. Derived parameters parallel the results of the base GIS datasets. Analysis of data resampled from 30-m to 60-, 120-, 210-, 240-, 480-, 960-, and 1920-m pixels indicates a general degradation of both elevation and land cover correlations as resolution decreases. Initial evaluation of model output values for soluble nitrogen and phosphorous indicates similar degradation with resolution. ?? Springer-Verlag 2004.

Journal of Geographical Systems

The use of local indicators of spatial association to improve LiDAR-derived predictions of potential amphibian breeding ponds

We examined whether spatially explicit information improved models that use LiDAR return signal intensity to discriminate in-pond habitat from terrestrial habitat at 24 amphibian breeding ponds. The addition of Local Indicators of Spatial Association (LISA) to LiDAR return intensity data significantly improved predictive models at all ponds, reduced residual error by as much as 74%, and appeared to improve models by reducing classification errors associated with types of in-pond vegetation. We conclude that LISA statistics can help maximize the information content that can be extracted from time resolved LiDAR return data in models that predict the occurrence of small, seasonal ponds. ?? Springer-Verlag 2008.

Journal of Geographical Systems

Alignment of surface water ontologies: A comparison of manual and automated approaches

More data are being collected about the world around us than ever before, but effectively using this information requires different data stores to be integrated in such a way that they can be seamlessly queried and analyzed. Automated alignment algorithms exist to facilitate this data integration challenge. In this paper we examine the utility of two current leading automated alignment systems to integrate four ontologies from the surface water domain. We show that the performance of such systems in this domain lags behind their results on popular benchmarks, and therefore incorporate the alignment task described here into the set of benchmarks used by the alignment community. In addition, we show that, with minor modifications, existing alignment algorithms can be used effectively within a semi-automated alignment system for the surface water domain.

Journal of Geographical Systems

Effects of climate change and urban development on the distribution and conservation of vegetation in a Mediterranean type ecosystem

Climate and land-use changes are projected to threaten biodiversity over this century. However, few studies have considered the spatial and temporal overlap of these threats to evaluate how ongoing land-use change could affect species ranges projected to shift outside conservation areas. We evaluated climate change and urban development effects on vegetation distribution in the Southwest ecoregion, California Floristic Province, USA. We also evaluated how well a conservation network protects suitable habitat for rare plant species under these change projections and identified primary sources of uncertainty. We used consensus-based maps from three species distribution models (SDMs) to project current and future suitable habitat for 19 species representing different functional types (defined by fire-response – obligate seeders, resprouting shrubs – and life forms – herbs, subshrubs), and range sizes (large/common, small/rare). We used one spatially explicit urban growth projection; two climate models, emission scenarios, and probability thresholds applied to SDMs; and high-resolution (90 m) environmental data. We projected that suitable habitat could disappear for 4 species and decrease for 15 by 2080. Averaged centroids of suitable habitat (all species) were projected to shift tens (up to hundreds) of kilometers. Herbs showed a small-projected response to climate change, while obligate seeders could suffer the greatest losses. Several rare species could lose suitable habitat inside conservation areas while increasing area outside. We concluded that (i) climate change is more important than urban development for vegetation habitat loss in this ecoregion through 2080 due to diminishing amounts of undeveloped private land in this region; (ii) the existing conservation plan, while extensive, may be inadequate to protect plant diversity under projected patterns of climate change and urban development, (iii) regional assessments of the dynamics of the drivers of biodiversity change based on high-resolution environmental data and consensus predictive mapping, such as this study, are necessary to identify the species expected to be the most vulnerable and to meaningfully inform regional-scale conservation.

California

Movement analysis of free-grazing domestic ducks in Poyang Lake, China: A disease connection

Previous work suggests domestic poultry are important contributors to the emergence and transmission of highly pathogenic avian influenza throughout Asia. In Poyang Lake, China, domestic duck production cycles are synchronized with arrival and departure of thousands of migratory wild birds in the area. During these periods, high densities of juvenile domestic ducks are in close proximity to migratory wild ducks, increasing the potential for the virus to be transmitted and subsequently disseminated via migration. In this paper, we use GPS dataloggers and dynamic Brownian bridge models to describe movements and habitat use of free-grazing domestic ducks in the Poyang Lake basin and identify specific areas that may have the highest risk of H5N1 transmission between domestic and wild birds. Specifically, we determine relative use by free-grazing domestic ducks of natural wetlands, which are the most heavily used areas by migratory wild ducks, and of rice paddies, which provide habitat for resident wild ducks and lower densities of migratory wild ducks. To our knowledge, this is the first movement study on domestic ducks, and our data show potential for free-grazing domestic ducks from farms located near natural wetlands to come in contact with wild waterfowl, thereby increasing the risk for disease transmission. This study provides an example of the importance of movement ecology studies in understanding dynamics such as disease transmission on a complicated landscape.

Poyang Lake

A new method for discovering behavior patterns among animal movements

Advanced satellite tracking technologies enable biologists to track animal movements at fine spatial and temporal scales. The resultant data present opportunities and challenges for understanding animal behavioral mechanisms. In this paper, we develop a new method to elucidate animal movement patterns from tracking data. Here, we propose the notion of continuous behavior patterns as a concise representation of popular migration routes and underlying sequential behaviors during migration. Each stage in the pattern is characterized in terms of space (i.e., the places traversed during movements) and time (i.e. the time spent in those places); that is, the behavioral state corresponding to a stage is inferred according to the spatiotemporal and sequential context. Hence, the pattern may be interpreted predictably. We develop a candidate generation and refinement framework to derive all continuous behavior patterns from raw trajectories. In the framework, we first define the representative spots to denote the underlying potential behavioral states that are extracted from individual trajectories according to the similarity of relaxed continuous locations in certain distinct time intervals. We determine the common behaviors of multiple individuals according to the spatiotemporal proximity of representative spots and apply a projection-based extension approach to generate candidate sequential behavior sequences as candidate patterns. Finally, the candidate generation procedure is combined with a refinement procedure to derive continuous behavior patterns. We apply an ordered processing strategy to accelerate candidate refinement. The proposed patterns and discovery framework are evaluated through conceptual experiments on both real GPS-tracking and large synthetic datasets.

International Journal of Geographical Information

A spatio-contextual probabilistic model for extracting linear features in hilly terrain from high-resolution DEM data

This paper introduces our research in developing a probabilistic model to extract linear terrain features from high resolution DEM (Digital Elevation Model) data. The proposed model takes full advantage of spatio-contextual information to characterize terrain changes. It first derives a quantifiable measure of spatio-contextual patterns of linear terrain feature, such as ridgelines, valley lines and crater boundaries, and then adopts multiple neighborhood analysis and a probability model to address data uncertainty in terrain surface modeling. Different from traditional approaches, the proposed model has the ability to achieve near-automated processing, and to support effective extraction of terrain features in both smooth and rough surfaces. Through a series of experiments, we demonstrate that the proposed approach outperforms existing techniques, including: thresholding, stream/drainage network analysis, visual descriptor, object-based image analysis and edge detection. We hope this work contributes to both the geospatial data science and geomorphology communities with a new way of utilizing high-resolution imagery in terrain analysis.

International Journal of Geographical Information

Loose-coupling a cellular automaton model and GIS: Long-term urban growth prediction for San Francisco and Washington/Baltimore

Prior research developed a cellular automaton model, that was calibrated by using historical digital maps of urban areas and can be used to predict the future extent of an urban area. The model has now been applied to two rapidly growing, but remarkably different urban areas: the San Francisco Bay region in California and the Washington/Baltimore corridor in the Eastern United States. This paper presents the calibration and prediction results for both regions, reviews their data requirements, compares the differences in the initial configurations and control parameters for the model in the two settings, and discusses the role of GIS in the applications. The model has generated some long term predictions that appear useful for urban planning and are consistent with results from other models and observations of growth. Although the GIS was only loosely coupled with the model, the model's provision of future urban patterns as data layers for GIS description and analysis is an important outcome of this type of calculation.

California, Maryland

Issues and prospects for the next generation of the spatial data transfer standard (SDTS)

The Spatial Data Transfer Standard (SDTS) was designed to be capable of representing virtually any data model, rather than being a prescription for a single data model. It has fallen short of this ambitious goal for a number of reasons, which this paper investigates. In addition to issues that might have been anticipated in its design, a number of new issues have arisen since its initial development. These include the need to support explicit feature definitions, incremental update, value-added extensions, and change tracking within large, national databases. It is time to consider the next stage of evolution for SDTS. This paper suggests development of an Object Profile for SDTS that would integrate concepts for a dynamic schema structure, OpenGIS interface, and CORBA IDL.

International Journal of Geographical Information

The modified polyconic projection for the IMW

The modified Polyconic map projection designed by Lallemand and adopted for the International Map of the World between 1909 and 1962 has two meridians and two parallels which are true to scale. Constructed geometrically in the past, forward and inverse coordinate transformations may be calculated analytically in order to transfer data from existing quadrangles to other maps. The equations for these transformations are derived and used to calculate representative tables of coordinates andscale factors. Although the projection is neither equal-area nor conformai, scale does not vary more than 0.06% throughout the quadrangle.

Cartographica: The International Journal for Geogr

Implications of Web Mercator and its Use in Online Mapping

Online interactive maps have become a popular means of communicating with spatial data. In most online mapping systems, Web Mercator has become the dominant projection. While the Mercator projection has a long history of discussion about its inappropriateness for general-purpose mapping, particularly at the global scale, and seems to have been virtually phased out for general-purpose global-scale print maps, it has seen a resurgence in popularity in Web Mercator form. This article theorizes on how Web Mercator came to be widely used for online maps and what this might mean in terms of data display, technical aspects of map generation and distribution, design, and cognition of spatial patterns. The authors emphasize details of where the projection excels and where it does not, as well as some of its advantages and disadvantages for cartographic communication, and conclude with some research directions that may help to develop better solutions to the problem of projections for general-purpose, multi-scale Web mapping.

Cartographica: The International Journal for Geogr

An examination of techniques for reformatting digital cartographic data. Part 2: The vector-to raster process.

Current graphic devices suitable for high-speed computer input and output of cartographic data are tending more and more to be raster-oriented, such as the rotating drum scanner and the color raster display. However, the majority of commonly used manipulative techniques in computer-assisted cartography and automated spatial data handling continue to require that the data be in vector format. The current article is the second part of a two-part paper that examines the state of the art in these conversion techniques. - from Author

Cartographica: The International Journal for Geogr

An examination of techniques for reformatting digital cartographic data/part 1: The raster-to- vector process.

Current graphic devices suitable for high-speed computer input and output of cartographic data are tending more and more to be raster-oriented, such as the rotating drum scanner and the color raster display. However, the majority of commonly used manipulative techniques in computer-assisted cartography and automated spatial data handling continue to require that the data be in vector format. This situation has recently precipitated the requirement for very fast techniques for converting digital cartographic data from raster to vector format for processing, and then back into raster format for plotting. The current article is part one of a two-part paper concerned with examining the state-of-the-art in these conversion techniques. In part one, algorithms to perform all phases of the raster-to-vector process are systematically outlined, and then compared in general terms. Examples of existing implementations of the raster-to-vector process are also described and evaluated. Part two will outline and compare algorithms to perform the reverse process, vector-to-raster conversion. Part two will also discuss raster-to-vector and vector-to-raster conversion as an integrated process.

Cartographica: The International Journal for Geogr