USGS Science⌕ Search

SEARCH · USGS Science

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS1990

Thrust-ridge paleodepositional model for the Upper Freeport coal bed and associated clastic facies, Upper Potomac coal field, Appalachian Basin, U.S.A.

A blind-thrust-ridge model is proposed to explain the lack of coarse clastic material in the vast minable Upper Freeport coal bed (UF). This coal bed contains only fine elastic partings and is overlain by regionally extensive, closely spaced channel-belt deposits in the Upper Potomac coal field of the Appalachian basin. A blind-thrust ridge may have formed a sediment trap and prevented c coarse fluvial sediments from entering the swamp during a period (Westphalian D) when the thick Upper Freeport peat accumulated. Anticlinal thrust ridges and associated depressions may have existed uninterrupted for about 40 km parallel to the Appalachian orogen. Sediment shed from the breached anticlinal ridges accumulated in the sediment trap and was carried out of the ends of the trap by streams that occupied the shear zone at the ends of the blind-thrust ridge. The extent, parallel to the orogen, of thick, areally extensive UF is related to the length of the blind-thrust ridge that, in turn, controlled the spacing of the river-derived coarse clastic sediments that entered the main basin from the east. The thrust plane eventually emerged to the surface of the blind-thrust ridge and peat accumulation was terminated when the ridge became eroded and the sediment trapped behind it was released. The peat was buried by abundant coarse clastic sediment, which formed closely spaced channel belts and intervening flood basins. This model has implications for widespread peat deposits (now coal) that developed in tropical regions a few hundred kilometers from the sea in a tectonically active foreland basin.

International Journal of Coal Geology↗
USGS1996

Metamorphic facies map of southeastern Alaska: Distribution, facies, and ages of regionally metamorphosed rocks

Nearly all of the bedrock in Southeastern Alaska has been metamorphosed, much of it under medium-grade conditions during metamorphic episodes that were associated with widespread plutonism. The oldest metamorphisms affected probable arc rocks near southern Prince of Wales Island and occurred during early and middle Paleozoic orogenies. The predominant period of metamorphism and associated plutonism occurred during Early Cretaceous to early Tertiary time and resulted in the development of the Coast plutonic-metamorphic complex that extends along the inboard half of Southeastern Alaska. Middle Tertiary regional thermal metamorphism affected a large part of Baranof Island.

Alaska↗
USGS1989

Dinoflagellate species and organic facies evidence of marine transgression and regression in the atlantic coastal plain

Palynological evidence is used to date and interpret depositional environments of sediments of Campanian, Maestrichtian and early Danian ages cored in three wells from South Carolina and Georgia. The evidence is usefil for distinguishing environments which lithofacies evidence indicates a range from nonmarine to coastal to inner neritic shallow shelf. Numerous dinoflagellate species and an organic facies defined abundant amoprphous debris (amorphous debris facies) distinguish shallow shelf sediments deposited during marine transgression. The nearshore amorphous debris facies of late Campanian age consists of heterogenous assemblages dominated by Palaeohystrichophora infusorioides Deflandre or Hystrichosphaerina varians (May). The farther offshore amorphous debris facies of late early Maestrichtian to late Maestrichtian age consists of heterogenous assemblages dominated by Glaphyrocysta retiintexta (Cookson) and/or Areoligera medusettiformis (Wetzel). The larger number of dinoflagellate species in the offshore facies represents the maximum transgression detected in the investigated interval. A multiple occurrence datum defined by the combination of first appearance, klast appearances and sole occurrence of dinoflagellate species at the base of each interval distinguished by the amorphous debris facies provides the first evidence of marine transgression. Relatively small organic residues consisting of intertinite and few or no palynomorphs define the inertinite facies in nonmarine deltaic and in coastal (lagoonal, tidal flat, interdistributary bary) sediments. Dinocyt{star, open}s are absent in the nonmarine sediments and are represented by few species and few specimens in the coastal inertinite faceis. A third organic facies (vascular tissue facies) is defined by the abundance of land plant tissue. Sporomorph species, including those of the Normapolles pollen group and of pteridophyte spores, comprise a large proportion of the total palynomorph flora in the inertinite and vascular tissue facies. The vascular tissue facies occurs in the proximal prodelta and nearshore shallow shelf lithofacies of early Maestrichtian age. Baed in the sequence of organuic facies, dinoflagellate species abundance, and lithofacies in the investigated wells, the nonmarine and coastal inertinite facies was first deposited and was followed during the late Campanian by a marine trangression when the nearshore amorphous debris facies was deposited. This was followed in the early Maestrichtian by the influx of terrigenous organic matter (vascular tissue facies) in response to deltaic progradation on the shallow shelf. A marine regression occurred towards the close of the early Maestrichtian, emplacing the coastal inertinite facies. The major marine transgression occurred near the end of the early Maestrichtian, developing a farther offshore amorphous debris facies on an expanded continental shelf which persisted through the late Maestrichtian. The inertinite facies returned during marine regression in the approximate position of the Maestrichtian/Danian boudnary. ?? 1989.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS1999

Influence of the Atlantic inflow and Mediterranean outflow currents on late Quaternary sedimentary facies of the Gulf of Cadiz continental margin

The late Quaternary pattern of sedimentary facies on the Spanish Gulf of Cadiz continental shelf results from an interaction between a number of controlling factors that are dominated by the Atlantic inflow currents flowing southeastward across the Cadiz shelf toward the Strait of Gibraltar. An inner shelf shoreface sand facies formed by shoaling waves is modified by the inflow currents to form a belt of sand dunes at 10-20 m that extends deeper and obliquely down paleo-valleys as a result of southward down-valley flow. A mid-shelf Holocene mud facies progrades offshore from river mouth sources, but Atlantic inflow currents cause extensive progradation along shelf toward the southeast. Increased inflow current speeds near the Strait of Gibraltar and the strong Mediterranean outflow currents there result in lack of mud deposition and development of a reworked transgressive sand dune facies across the entire southernmost shelf. At the outer shelf edge and underlying the mid-shelf mud and inner shelf sand facies is a late Pleistocene to Holocene transgressive sand sheet formed by the eustatic shoreline advance. The late Quaternary pattern of contourite deposits on the Spanish Gulf of Cadiz continental slope results from an interaction between linear diapiric ridges that are oblique to slope contours and the Mediterranean outflow current flowing northwestward parallel to the slope contours and down valleys between the ridges. Coincident with the northwestward decrease in outflow current speeds from the Strait there is the following northwestward gradation of contourite sediment facies: (1) upper slope sand to silt bed facies, (2) sand dune facies on the upstream mid-slope terrace, (3) large mud wave facies on the lower slope, (4) sediment drift facies banked against the diapiric ridges, and (5) valley facies between the ridges. The southeastern sediment drift facies closest to Gibraltar contains medium-fine sand beds interbedded with mud. The adjacent valley floor facies is composed of gravelly, shelly coarse to medium sand lags and large sand dunes on the valley margins. By comparison, the northwestern drift contains coarse silt interbeds and the adjacent valley floors exhibit small to medium sand dunes of fine sand. Because of the complex pattern of contour-parallel and valley-perpendicular flow paths of the Mediterranean outflow current, the larger-scale bedforms and coarser-grained sediment of valley facies trend perpendicular to the smaller-scale bedforms and finer-grained contourite deposits of adjacent sediment drift facies. Radiocarbon ages verify that the inner shelf shoreface sand facies (sedimentation rate 7.1 cm/kyr), mid-shelf mud facies (maximum rate 234 cm/kyr) and surface sandy contourite layer of 0.2-1.2 m thickness on the Cadiz slope (1-12 cm/kyr) have deposited during Holocene time when high sea level results in maximum water depth over the Gibraltar sill and full development of the Atlantic inflow and Mediterranean outflow currents. The transgressive sand sheet of the shelf, and the mud layer underlying the surface contourite sand sheet of the slope, correlate, respectively, with the late Pleistocene sea level lowstand and apparent weak Mediterranean outflow current.

Marine Geology↗
USGS2013

Traces in the dark: sedimentary processes and facies gradients in the upper shale member of the Upper Devonian-Lower Mississippian Bakken Formation, Williston Basin, North Dakota, U.S.A.

Black, organic-rich rocks of the upper shale member of the Upper Devonian–Lower Mississippian Bakken Formation, a world-class petroleum source rock in the Williston Basin of the United States and Canada, contain a diverse suite of mudstone lithofacies that were deposited in distinct facies belts. The succession consists of three discrete facies associations (FAs). These comprise: 1) siliceous mudstones; 2) quartz- and carbonate-bearing, laminated mudstones; and 3) macrofossil-debris-bearing massive mudstones. These FAs were deposited in three facies belts that reflect proximal to distal relationships in this mudstone system. The macrofossil-debris-bearing massive mudstones (FA 3) occur in the proximal facies belt and contain erosion surfaces, some with overlying conodont and phosphate–lithoclast lag deposits, mudstones with abundant millimeter-scale siltstone laminae showing irregular lateral thickness changes, and shell debris. In the medial facies belt, quartz- and carbonate-bearing, laminated mudstones dominate, exhibiting sub-millimeter-thick siltstone layers with variable lateral thicknesses and localized mudstone ripples. In the distal siliceous mudstone facies belt, radiolarites, radiolarian-bearing mudstones, and quartz- and carbonate-bearing, laminated mudstones dominate. Overall, total organic carbon (TOC) contents range between about 3 and 10 wt %, with a general proximal to distal decrease in TOC content. Abundant evidence of bioturbation exists in all FAs, and the lithological and TOC variations are paralleled by changes in burrowing style and trace-fossil abundance. While two horizontal traces and two types of fecal strings are recognized in the proximal facies belt, only a single horizontal trace fossil and one type of fecal string characterize mudstones in the distal facies belt. Radiolarites intercalated into the most distal mudstones are devoid of traces and fecal strings. Bedload transport processes, likely caused by storm-induced turbidity currents, were active across all facies belts. Suspended sediment settling from near the ocean surface, however, most likely played a role in the deposition of some of the mudstones, and was probably responsible for deposition of the radiolarites. The distribution pattern of high-TOC sediments in proximal and lower-TOC deposits in some distal facies is interpreted as a function of higher accumulation rates during radiolarian depositional events leading to a decrease in suspension-derived organic carbon in radiolarite laminae. The presence of burrows in all FAs and nearly all facies in the upper Bakken shale member indicates that dysoxic conditions prevailed during its deposition. This study shows that in intracratonic high-TOC mudstone successions such as the upper Bakken shale member bed-load processes most likely dominated sedimentation, and conditions promoted a thriving infaunal benthic community. As such, deposition of the upper Bakken shale member through dynamic processes in an overall dysoxic environment represents an alternative to conventional anoxic depositional models for world-class source rocks.

North Dakota↗
USGS2023

The edge of a Permian erg: Eolian facies and provenance of the Lyons Sandstone in northern Colorado

Facies of the Permian Lyons Sandstone are described and interpreted based on analyses of 23 cores from Larimer and Weld counties, Colorado. Here, the Lyons Sandstone consists of very fine- to medium-grained sandstone with minor silt and mudstone interbeds. The unit has five recurrent siliciclastic facies that can be grouped into two facies associations (FA). FA1 consists of (1) high-angle, cross-laminated sandstone (Facies 1; interpreted as eolian dune remnants); (2) low-angle, cross-laminated and horizontally laminated sandstone (Facies 2; interdune); and (3) chaotically bedded to folded sandstone (Facies 3; lower dune flanks). FA2 , in contrast, is mainly (4) wavy- to irregularly laminated silty sandstone (Facies 4; wet to damp interdune); and (5) massive to wavy-laminated silt-rich mudstone (Facies 5; ponded water areas between dunes) with minor amounts of high-angle, cross-laminated sandstone (Facies 1) and low-angle, cross-laminated and horizontally laminated sandstone (Facies 2). FA1 is hypothesized to have been produced in an eolian system akin to those that might exist in the dune-dominated portion of an erg, whereas FA2 was deposited in the intermittently wet portion of this eolian system, perhaps along erg margins or in flat dune-adjacent settings that were impacted by the water table. Isopach data suggests that the study area is on the fringe of a larger Lyons system that spans > 100,000 km 2 , and was deposited close to the Ancestral Rockies—a paleogeography consistent with deposition in erg to erg-margin paleoenvironments. Detrital zircon populations from nearby Colorado Front Range outcrops and from 12 correlative eolian units are dominated by small, well-rounded Paleoproterozoic and Mesoproterozoic grain populations that are remarkably similar between units, signaling a well-mixed system that also received an influx of distally sourced sediment from the Appalachian orogen. Detrital zircon-based maximum depositional ages of the Lyons Sandstone and its equivalents are internally consistent with deposition of the unit during the latest Artinskian to Kungurian.

Colorado↗
USGS1989

Depositional facies, petrofacies, and diagenesis of siliciclastics of Morrow and Springer rocks, Anadarko Basin, Oklahoma

Investigations of 6,500 ft of core and -100 thin-sectioned core samples from 30 drill holes from the Oklahoma Panhandle to the southeast part of the Anadarko basin, Oklahoma, have led to the recognition of three depositional facies of the Springer and Morrow Formations of Mississippian and Pennsylvanian age, as recognized by geologists working in the subsurface of the Midcontinent region. Lithofacies include (1) fluvial-influenced coastal (FIC), (2) tidal-influenced nearshore (TINS), and (3) mixed, which shows mixed tidal and non-tidal marine influence (MT/NTM). The FIC facies is restricted to down-hole depths of 4,400-8,000 ft; the TINS facies is recognized only between down-hole depths of 4,000 and 18,000 ft. Thin-section study of sandstone indicates that quartz arenite is the most common rock type in both the FIC and TINS facies. Subarkose is present, but not common, in the FIC facies. Sublitharenite is moderately common in the TINS facies. Calcite skeletal fragments, mainly of brachiopods and crinoids, are more abundant in the FJC facies than in the TINS facies. The mixed facies includes quartz arenite, subarkose, and sublitharenite. Iron-bearing carbonate cements are observed in rocks of all three depositional facies. Porosity is typically <10%, and has been reduced by compaction and redistribution of silica, as well as by iron-bearing carbonate cements. Clay cements are less common, but are locally important. Loss of porosity due to mechanical compaction is significant in some samples from depths > 12,000 ft. Thin films of bitumen have inhibited the effects of diagenesis in some samples. Fractures are identified in core samples, but are rare in thin sections. Porosity is due primarily to dissolution of glauconite, clays or clayey matrix, and some framework grains, but many dissolution pores are partly or completely filled with various clays, and only microporosity remains.

Oklahoma↗
USGS1991

Facies development in the Lower Freeport coal bed, west-central Pennsylvania, U.S.A.

The Lower Freeport coal bed in west-central Pennsylvania is interpreted to have formed within a lacustrine-mire environment. Conditions of peat formation, caused by the changing chemical and physical environments, produced five coal facies and two mineral-rich parting facies within the coal bed. The coal bed facies are compositionally unique, having developed under varying conditions, and are manifested by megascopic, petrographic, palynologic and quality characteristics. The initial environment of the Lower Freeport peat resulted in a coal facies that is relatively high in ash yield and contains large amounts of lycopod miospores and moderate abundances of cryptotelinite, crypto-gelocollinite, inertinite and tree fern miospores. This initial Lower Freeport peat is interpreted to have been a topogenous body that was low lying, relatively nutrient rich (mesotrophic to eutrophic), and susceptible to ground water and to sediment influx from surface water. The next facies to form was a ubiquitous, clay-rich durain parting which is attributed to a general rise in the water table accompanied by widespread flooding. Following formation of the parting, peat accumulation resumed within an environment that inhibited clastic input. Development of doming in this facies restricted deposition of the upper shale parting to the margins of the mire and allowed low-ash peat to form in the interior of the mire. Because this environment was conducive to preservation of cellular tissue, this coal facies also contains large amounts of crypto-telinite. This facies development is interpreted to have been a transitional phase from topogenous, planar peat formation to slightly domed, oligotrophic (nutrient-poor) peat formation. As domed peat formation continued, fluctuations in the water table enabled oxidation of the peat surface and produced high inertinite concentrations toward the top of the coal bed. Tree ferns became an increasingly important peat contributor in the e upper facies, based on the palynoflora. This floral change is interpreted to have resulted from the peat surface becoming less wet or better drained, a condition that inhibited proliferation of lycopod trees. Accumulation of the peat continued until rising water levels formed a freshwater lake within which clays and silts were deposited. The development of the Lower Freeport peat from a planar mire through transitional phases toward domed peat formation may be an example of the type of peat formation of other upper Middle and Upper Pennsylvanian coal beds.

International Journal of Coal Geology↗
USGS1966

Hydrochemical facies and ground-water flow patterns in northern part of Atlantic Coastal Plain

The part of the Atlantic Coastal Plain that extends from New Jersey through Virginia was selected as a suitable field model in which to study the relationships between geology, hydrology, and chemical character of ground water. The ground-water flow pattern is the principal hydrologic control on the chemical character of the water. Within the Coastal Plain sediments, the proportions of clay, glauconitic sand, and calcareous material are the principal lithologic controls over the chemistry of the water. A subsurface body of salt water extends from southern New Jersey through southern Virginia and occupies the deposits deeper than about 500 feet below land surface in the eastern part of the Coastal Plain. The position of its top is determined by the relative head, which in turn is influenced by topography, drainage density, and the thickness and permeability of the Coastal Plain sediments. Hydrochemical facies is a term used in this paper to denote the diagnostic chemical aspect of ground-water solutions occurring in hydrologic systems. The facies reflect the response of chemical processes operating within the lithologic framework and also the pattern of flow of the water. The distribution of these facies is shown in trilinear diagrams and isometric fence diagrams and on maps showing isopleths of chemical constituents within certain formations. The occurrence of the various facies within one formation or within a group of formations of uniform mineralogy indicates that the ground-water flow through the aquifer system modifies the distribution of the facies. Flow patterns of fresh ground water shown on maps and in cross sections have been deduced from available water-level data. These patterns are controlled by the distribution of the higher landmasses and by the depth to either bedrock or to the salt-water interface. The mapping of hydrochemical facies shows that at shallow depths within the Coastal Plain (less than about 200 ft) the calcium-magnesium cation facies generally predominates. The bicarbonate anion facies occurs within more of the shallow Coastal Plain sediments than does the sulfate or the chloride facies. In deeper formations, the sodium chloride character predominates. The lower dissolved-solids content of the ground water in New Jersey indicates less upward vertical leakage than in Maryland and Virginia, where the shallow formations contain solutions of higher concentration.

Delaware, Maryland, New Jersey, Pennsylvania, Virg↗
USGS2003

Sand ridges off Sarasota, Florida: A complex facies boundary on a low-energy inner shelf environment

The innermost shelf off Sarasota, Florida was mapped using sidescan-sonar imagery, seismic-reflection profiles, surface sediment samples, and short cores to define the transition between an onshore siliciclastic sand province and an offshore carbonate province and to identify the processes controlling the distribution of these distinctive facies. The transition between these facies is abrupt and closely tied to the morphology of the inner shelf. A series of low-relief nearly shore-normal ridges characterize the inner shelf. Stratigraphically, the ridges are separated from the underlying Pleistocene and Tertiary carbonate strata by the Holocene ravinement surface. While surficial sediment is fine to very-fine siliciclastic sand on the southeastern sides of the ridges and shell hash covers their northwestern sides, the cores of these Holocene deposits are a mixture of both of these facies. Along the southeastern edges of the ridges the facies boundary coincides with the discontinuity that separates the ridge deposits from the underlying strata. The transition from siliciclastic to carbonate sediment on the northwestern sides of the ridges is equally abrupt, but it falls along the crests of the ridges rather than at their edges. Here the facies transition lies within the Holocene deposit, and appears to be the result of sediment reworking by modern processes. This facies distribution primarily appears to result from south-flowing currents generated during winter storms that winnow the fine siliciclastic sediment from the troughs and steeper northwestern sides of the ridges. A coarse shell lag is left armoring the steeper northwestern sides of the ridges, and the fine sediment is deposited on the gentler southeastern sides of the ridges. This pronounced partitioning of the surficial sediment appears to be the result of the siliciclastic sand being winnowed and transported by these currents while the carbonate shell hash falls below the threshold of sediment movement and is left as a lag. The resulting facies boundaries on this low-energy, sediment-starved inner continental shelf are of two origins which both are tied to the remarkably subtle ridge morphology. Along the southeastern sides of the ridges the facies boundary coincides with a stratigraphic discontinuity that separates Holocene from the older deposits while the transition along the northwestern sides of the ridges is within the Holocene deposit and is the result of sediment redistribution by modern processes. ?? 2003 Elsevier B.V. All rights reserved.

Marine Geology↗
USGS2012

Sequential development of platform to off-platform facies of the great American carbonate bank in the central Appalachians

In the central Appalachians, carbonate deposition of the great American carbonate bank began during the Early Cambrian with the creation of initial ramp facies of the Vintage Formation and lower members of the Tomstown Formation. Vertical stacking of bioturbated subtidal ramp deposits (Bolivar Heights Member) and dolomitized microbial boundtsone (Fort Duncan Member) preceded the initiation of platform sedimentation and creation of sand shoal facies (Benevola Member) that was followed by the development of peritidal cyclicity (Daragan Member). Initiation of peritidal deposition coincided with the development of a rimmed platform that would persist throughout much of the Cambrian and Early Odrovician. At the end of deposition of the Waynesboro Formation, the platform became subaerially exposed because of the Hawke Bay regression, bringing the Sauk I supersequence to and end. In the Conestoga Valley of eastern Pennsylvania, Early Cambrian ramp deposition was succeeded by deposition of platform-margin and periplatfrom facies of the Kinzers Formation. The basal Sauk II transgression during the early Middle Cambrian submerged the platform and reinitiated the pertidal cyclicity that had characterized the pre-Hawke Bay deposition, This thick stack of meter-scale cycles is preserved as the Pleasant Hill and Warrior Formations of the Nittany arch, the Elbrook Formation of the Great Valley, and the Zooks Corner Formations of the Conestoga Valley. Deposition of peritidal cycles was interrupted during deposition of the Glossopleura and Bathuriscus-Elrathina Biozones by third-order deepening episodes that submerged the platform with subtidal facies. Regressive facies of the Sauk II supersequence produced platform-wide restrictions and the deposition of the lower sandy member of the Gatesburg Formation, the Big Spring Station Member of the Conococheague Formation, and the Snitz Creek Formation. Submergence of the platform was initiated during the late Steptoean ( Elvinia Zone) with the epansion of extensive subtidal thrombotic boundstone facies. Vertical stacking of no fewer than four of these thrombolite-dominated intervals records third-order deepening episodes separated by intervening shallowing episodes that produced peritidal ribbony and laminated mudcracked dolostone. The maximum deepening of the Sauk III transgression produced the Stonehenge Formation in two separate and distinct third-order submergences. Circulation restriction during the Sauk III regression produced a thick stack of meter-scale cycles of the Rockdale Run Formation, and the lower Bellefonte Dolomite of the Nittany arch (central Pennsylvania). This regressive phase was interrupted by a third-order deepening event that produced the oolitic member of the lower Rockdale Run and the Woodsboro Member of the Grove Formation in the Frederick Valley. Restricted circulation continued into the Whiterockian, with deposition of the upper Rockdale Run and the Pinesberg Station Dolomite in the Great Valley and the missile and upper parts of the Bellefonte Dolomore and the Nittany Arch region. This deposition was continuous from the Ibexian into the Whiterockian; the succession lacks significant unconformities and there are no missing biozones through this interval, the top of which marks the end of the Sauk megasequence. During deposition of the Tippecanoe megasequence, the peritidal shelf cycles were reestablished during deposition of the St. Paul Group. The vertical stacking of lithologies in the Row Park and New Market Limestones represents transgressive and regressice facies of a third-order deepening event. This submergence reached its maximum deepening within the lower Row Park Limestone and extended with the Nittany arch region with deposition of equivalent Loysburg Formation.. Shallow tidal-flat deposits were bordered to the south and east by deep-water ramp deposits of the Lincolnshire Formation. The St. Paul Group is succeeded upsection by ramp facies of the Chamersberg and the Edinburg Formations in the Great Valley, whereas shallow-shelf sedimentation continued in the Nittany-arch area with the depostion of the Hatter Limestoen and the Snyder and Linden Hall Formations. Carbonate deposition on the great American carbonate bank was brought to an end when it was buried beneath clastic flysch deposits of the Martinsberg Formation. Foundering of the bamk was diachronus, and the flysch seidments prograded from east to west.

Maryland, Pennsylvania, Virginia, West Virginia↗
USGS1989

Distribution, facies, ages, and proposed tectonic associations of regionally metamorphosed rocks in northern Alaska

Approximately half of the exposed bedrock in northern Alaska has been regionally metamorphosed. The most widespread metamorphic episode that affected northern Alaska occurred under low-grade, initially high-pressure (blueschist-facies) conditions during Mesozoic time. This episode is thought to have been related to the obduction of one or more oceanic terranes onto the continental margin of North America. Rocks whose metamorphism is considered to have been part of this major episode have an aerial distribution of approximately 10,000 km 2 in the southern Brooks Range, 5,000 km 2 across much of the Seward Peninsula, and 800 km 2 in the Ruby geanticline within the southeastern borderlands of the Yukon-Koyukuk basin. In the southern Brooks Range and on the Seward Peninsula, continental rocks experienced a clockwise pressure-temperature path that evolved during Middle Jurassic to late Early Cretaceous time from the low- to high-temperature subfacies of the blueschist facies and, finally, due to decreasing pressure, evolved to the greenschist facies. Metamorphism in the southern Brooks Range was associated with north-vergent compression along a south-dipping subduction zone that emplaced the oceanic rocks of the Angayucham terrane (represented by klippen of ultramafic rocks and prehnite-pumpellyite-facies metabasite, metatuff, metachert, and metasedimentary rocks) onto the continental margin. The present structural and metamorphic relation between the continental blueschistand greenschist-facies rocks and the structurally overlying lower temperature and pressure oceanic prehnite-pumpellyite-facies rocks to the south indicates that postmetamorphic or late metamorphic down-to-the-south, low-angle extensional faulting has dismembered the upper plate and removed much of the section that originally buried the blueschists. High-pressure metamorphism on the Seward Peninsula probably had a similar origin to that in the southern Brooks Range, but remnants of the overriding plate have not been identified, and the mechanism (such as left-lateral strike-slip faulting or oroclinal bending) by which the high-pressure rocks in the two areas were separated is not known. A significant difference between the thermal histories of these two metamorphic belts also is enigmatic: low-grade metamorphism on the Seward Peninsula was followed by intermediate-pressure amphibolite-facies and, locally, granulite-facies metamorphism as well as plutonism in mid-Cretaceous time, but no such high-temperature events have been documented within the high-pressure belt of the southern Brooks Range. In the Ruby geanticline, glaucophane, attesting to high-pressure metamorphism, is sporadically developed both within the continental rocks of the lower plate and, less commonly, near the base of the overlying oceanic thrust sheets. The direction from which the oceanic rocks were thrust and determination of which oceanic sheets were involved is unclear. Although the majority of the metamorphic episodes that affected northern Alaska occurred during the Mesozoic, older episodes have been documented or are suspected in a few areas. Late Proterozoic medium-grade metamorphism has been documented in a small area in the southwestern Brooks Range, Middle to Late Proterozoic or early Paleozoic metamorphism just south of the Ruby geanticline, and middle Paleozoic metamorphism in the eastern Brooks Range. High-temperature, high-pressure metamorphism of klippen in the Yukon-Tanana upland is tentatively considered to have occurred in early Paleozoic time. Metamorphic ages of units in several areas, particularly in the Ruby geanticline and the Yukon-Tanana upland, can be bracketed only between the probable Paleozoic age of their protoliths and the late Early Cretaceous age of postmetamorphic granitoids that intrude them.

Alaska↗
USGS2001

Geomorphology, facies architecture, and high-resolution, non-marine sequence stratigraphy in avulsion deposits, Cumberland Marshes, Saskatchewan

This paper demonstrates field relationships between landforms, facies, and high-resolution sequences in avulsion deposits. It defines the building blocks of a prograding avulsion sequence from a high-resolution sequence stratigraphy perspective, proposes concepts in non-marine sequence stratigraphy and flood basin evolution, and defines the continental equivalent to a parasequence. The geomorphic features investigated include a distributary channel and its levee, the Stage I crevasse splay of Smith et al. (Sedimentology, vol. 36 (1989) 1), and the local backswamp. Levees and splays have been poorly studied in the past, and three-dimensional (3D) studies are rare. In this study, stratigraphy is defined from the finest scale upward and facies are mapped in 3D. Genetically related successions are identified by defining a hierarchy of bounding surfaces. The genesis, architecture, geometry, and connectivity of facies are explored in 3D. The approach used here reveals that avulsion deposits are comparable in process, landform, facies, bounding surfaces, and scale to interdistributary bayfill, i.e. delta lobe deposits. Even a simple Stage I splay is a complex landform, composed of several geomorphic components, several facies and many depositional events. As in bayfill, an alluvial ridge forms as the feeder crevasse and its levees advance basinward through their own distributary mouth bar deposits to form a Stage I splay. This produces a shoestring-shaped concentration of disconnected sandbodies that is flanked by wings of heterolithic strata, that join beneath the terminal mouth bar. The proposed results challenge current paradigms. Defining a crevasse splay as a discrete sandbody potentially ignores 70% of the landform's volume. An individual sandbody is likely only a small part of a crevasse splay complex. The thickest sandbody is a terminal, channel associated feature, not a sheet that thins in the direction of propagation. The three stage model of splay evolution proposed by Smith et al. (Sedimentology, vol. 36 (1989) 1) is revised to include facies and geometries consistent with a bayfill model. By analogy with delta lobes, the avulsion sequence is a parasequence, provided that its definition is modified to be independent from sea level. In non-marine settings, facies contacts at the tops of regional peats, coals, and paleosols are analogous to marine flooding surfaces. A parasequence is redefined here as a relatively conformable succession of genetically related strata or landforms that is bounded by regional flooding surfaces or their correlative surfaces. This broader definition incorporates the concept of landscape evolution between regional flooding surfaces in a variety of depositional settings. With respect to landscape evolution, accommodation space has three spatial dimensions - vertical (x), lateral (y), and down-the-basin (z). A flood basin fills in as landforms vertically (x) and laterally accrete (y), and prograde down-the-basin (z). Vertical aggradation is limited by the elevation of maximum flood stage (local base level). Differential tectonism and geomorphology control the slope of the flood basin floor and the direction of landscape evolution. These processes produce parasequences that include inclined stratal surfaces and oriented, stacked macroforms (clinoforms) that show the magnitude and direction of landscape evolution. ?? 2001 Elsevier Science B.V. All rights reserved.

Sedimentary Geology↗
USGS2026

An integrated mudstone facies classification scheme and revised interpretation of the sedimentologic processes driving carbon burial in the Cenomanian–Turonian Greenhorn Formation, Colorado, U.S.A.

Standardizing facies descriptions has proven key to integrating interpretations of depositional processes and environments from sedimentologic observations with geochemistry data for mudstone lithologies. Because of their fine-grained nature, high degree of compaction, and heterogeneous composition, standardizing methods for mudstone descriptions has proven difficult, but it is critical to formulating meaningful interpretations of the processes that govern the accumulation of organic-rich lithologies and their role in both petroleum systems and the global carbon cycle. In this study, we have developed a modified facies classification scheme for mudstone lithologies that incorporates sedimentologic and compositional observation at the hand-sample and thin-section scales with geochemical measurements, including bulk organic and inorganic geochemistry, to characterize these rocks and their variability more completely for improved interpretations of depositional environments during a low-order sea-level transgression. The facies described in this study are of the Cenomanian–Turonian Greenhorn Formation in the USGS #1 Portland Core drilled in Fremont County, Colorado. Strata of the Greenhorn Formation span Oceanic Anoxic Event 2 (OAE-2) and the preceding interval. Lithologies range from organic-rich argillaceous mudstones with varied sedimentary structures to organic-lean, highly bioturbated limestones. Six facies were identified, each differentiated by varied sedimentary structures and geochemical composition. These facies occur in a predictable stratigraphic stacking pattern that represents a low-order sea-level transgression with interpreted depositional environments ranging from terrigenous-dominated pro-delta and muddy continental shelf at the base of the interval to pelagic offshore marine at the top of the Greenhorn Formation. Though the facies are consistent with previous interpretations of depositional environments at this locale in the Cretaceous Western Interior Seaway during the Greenhorn cyclothem, the sedimentary processes governing the accumulation of organic-rich strata that have defined this interval are significantly revised. Variability in the proximity and intensity of bottom currents driven by storms and geostrophic flows were key to the accumulation of each facies, with significant sediment transport occurring even through deposition in the most oxygen-depleted bottom waters. The methodology and interpretations provided here are now being employed to basin-scale predictions of organic enrichment utilizing calibrated petrophysical methods. The approach and results from this study improve understanding of how organic and inorganic carbon was sequestered during perturbations to the global carbon cycle associated with events such as OAE-2.

Colorado↗
USGS1954

Sedimentary facies of iron-formation

The sedimentary iron -formations of Precambrian age in the Lake Superior region can be divided on the basis of the dominant original iron mineral into four principal facies : sulfide, carbonate, oxide, and silicate. As chemical sediments, these rocks reflect certain aspects of the chemistry of the depositional environments. The major control, at least for the sulfide, carbonate, and oxide types, probably was the oxidation potential. The evidence indicates that deposition took place in restricted basins, which were separated from the open sea by thresholds that inhibited free circulation and permitted development of abnormalities in oxidation potential and water composition. The sporadic distribution of metamorphism and of later oxidation permits description of the primary facies on the basis of unoxidized, essentially unmetamorphosed material. The sulfide facies is represented by black slates in which pyrite may make up as much as 40 percent of the rock. The free-carbon content of these rocks typically ranges from 5 to 15 percent, indicating that ultra-stagnant conditions prevailed during deposition. Locally, the pyritic rocks contain layers of iron -rich carbonate. The carbonate facies consists, in its purer form, of interbedded iron -rich carbonate and chert. It is a product of an environment in which oxygen concentration was sufficiently high to destroy most of the organic material but not high enough to permit formation of ferric compounds. The oxide facies is found as two principal types, one characterized by magnetite and the other by hematite. Both minerals appear to be of primary origin. The magnetite-banded rock is one of the dominant lithologies in the region; it consists typically of magnetite interlayered with chert, carbonate, or iron silicate, or combinations of the three. Its mineralogy and association suggest origin under weakly oxidizing to moderately reducing conditions, but the mode of precipitation of magnetite is not clearly understood. The hematite-banded rocks consist of finely crystalline hematite interlayered with chert or jasper. Oolitic structure is common. This facies doubtless accumulated in a strongly oxidizing, probably near-shore, environment similar to that in which younger hema-titic ironstones such as the Clinton oolite were deposited. The silicate facies contains one or more of the hydrous ferrous silicates (greenalite, minnesotaite, stilpnomelane, chlorite) as a major constituent. Granule structure, similar to that of glauconite, is typical of some varieties; others are nongranular and finely laminated. The most common association of the silicate rocks is with either carbonate- or magnetite-bearing rocks, which suggests that the optimum conditions for deposition ranged from slightly oxidizing to slightly reducing. The relationship between the iron -rich rocks and volcanism, stressed by many authors, is considered by the writer to be structural, not chemical: in the Lake Superior region both iron -deposition and volcanism are believed to be related to geosynclinal development during Huronian time. In Michigan, the lower Huronian rocks are iron -poor quartzite and dolomite-typical "stable-shelf" deposits; much of the upper Huronian consists of iron -poor graywacke and slate with associated volcanic rocks -a typical "geosynclinal" assemblage. Thus the iron -rich beds of the middle Huronian and lower part of the upper Huronian were deposited during a transitional stage in structural history. The major environmental requirement for deposition of iron - formation is the closed or restricted basin; this requirement coincides in time with what would be a normal stage in evolution of the geosyncline: namely, structural development of offshore buckles or swells that subsequently develop into island arcs characterized by volcanism.

Lake Superior↗