USGS ScienceSearch

SEARCH · USGS Science

Results for “Bulletin of the Association of Engineering Geologists”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

10 recordsLinked to original sources

Trends in Engineering Geologic and Related Mapping 1972–1983

Progress is reviewed that has been made during the period 1972-1982 in producing medium- and small-scale engineering geologic maps with a variety of content. Improved methods to obtain and present information are evolving. Standards concerning text and map content, soil and rock classification, and map symbols have been proposed. Application of geomorphological techniques in terrain evaluation has increased, as has the use of aerial photography and other remote sensing. Computers are being used to store, analyze, retrieve, and print both text and map information. Development of offshore resources, especially petroleum, has led to marked improvement and growth in marine engineering geology and geotechnology. Coordinated planning for societal needs has required broader scope and increased complexity of both engineering geologic and environmental geologic studies. Refs.

Bulletin of the Association of Engineering Geologi

Electrical Techniques for Engineering Applications

Surface electrical geophysical methods have been used in such engineering applications as locating and delineating shallow gravel deposits, depth to bedrock, faults, clay zones, and other geological phenomena. Other engineering applications include determining water quality, tracing ground water contaminant plumes and locating dam seepages. Various methods and electrode arrays are employed to solve particular geological problems. The sensitivity of a particular method or electrode array depends upon the physics on which the method is based, the array geometry, the electrical contrast between the target and host materials, and the depth to the target. Each of the available electrical methods has its own particular advantages and applications which the paper discusses.

Bulletin of the Association of Engineering Geologi

Economic Losses and Fatalities Due to Landslides

Annual losses in the United States, Japan, Italy, and India have been estimated at 1 billion or more each. During the period 1971-74, nearly 600 people per year were killed by landslides worldwide; about 90 percent of these deaths occurred in the Circum-Pacific region. From 1967-82, 150 people per year died in Japan as a result of slope failures. In the United States, the number of landslide-related fatalities per year exceeds 25. Japan leads other nations in development of comprehensive programs to reduce economic losses and fatalities due to landslides. The United States recently has proposed a national landslide hazard reduction program.

Bulletin of the Association of Engineering Geologi

Some Techniques for Reducing Landslide Hazards

Many techniques are available for reducing landslide hazards; 27 are described in this paper. Prerequisites for the successful use of these techniques are hazard information understandable to nongeologists and adequate communication of this information to those who will, or are required to, use it. It is concluded that certain factors needed to ensure the lasting effectiveness of these techniques are usually beyond the control of the public planner, engineer, and decisionmaker.

Bulletin of the Association of Engineering Geologi

Bluff recession rates along the Lake Michigan shoreline in Illinois

For two time periods, 1872-1937 and 1937-1987, rates of retreat vary from 10 to 75 cm/yr between discrete segments of bluffs (defined by lithology) and between time periods for a given bluff segment. The average retreat rates for the entire area, however, do not vary significantly between the two time periods and are approximately 20-25 cm/yr. The temporally constant regional retreat rates and the regular shape of the local shoreline indicate that a long-term uniform rate of retreat prevails and that local variations in rates balance out through time to produce long-term parallel (in map view) bluff retreat in the area.

Illinois

An engineering rock classification to evaluate seismic rock-fall susceptibility and its application to the Wasatch Front

Investigations of earthquakes world wide show that rock falls are the most abundant type of landslide that is triggered by earthquakes. An engineering classification originally used in tunnel design, known as the rock mass quality designation (Q), was modified for use in rating the susceptibility of rock slopes to seismically-induced failure. Analysis of rock-fall concentrations and Q-values for the 1980 earthquake sequence near Mammoth Lakes, California, defines a well-constrained upper bound that shows the number of rock falls per site decreases rapidly with increasing Q. Because of the similarities of lithology and slope between the Eastern Sierra Nevada Range near Mammoth Lakes and the Wasatch Front near Salt Lake City, Utah, the probabilities derived from analysis of the Mammoth Lakes region were used to predict rock-fall probabilities for rock slopes near Salt Lake City in response to a magnitude 6.0 earthquake. These predicted probabilities were then used to generalize zones of rock-fall susceptibility.

Bulletin of the Association of Engineering Geologi

Modeling and analysis of the 1949 Narrows landslide, Tacoma, Washington

A large landslide failed catastrophically along steep, 90-m (300-ft) high bluffs overlooking the waters of Puget Sound at Tacoma, Washington, in April of 1949, three days after the region was struck by a magnitude 7.1 earthquake. The area of failure was investigated to estimate the static and seismic stability of the pre-earthquake slope and to identify factors that contributed to the failure. Results of static analyses suggest that the slope was marginally stable and that high ground-water conditions would have significantly reduced slope stability. The Newmark analysis of dynamic (seismic) slope stability was used to calculate predicted inertial displacements for the landslide for a range of possible material property and ground-water conditions. Comparison of predicted displacements with a reported displacement suggests that the ground motion could have initiated the large-scale failure. Results of the study provide a basis for discussion and comparison of similar bluffs in the Puget Sound region that may be susceptible to catastrophic, earthquake-induced slope failure.

Washington

The susceptibility of rock slopes to earthquake-induced failure

Faulure of rock slopes is a major cause of damage and casualties during moderate and strong earthquakes. This article presents a method for assessing the seismic stability of rock slopes, which can be applied on a regional scale, using data from existing maps, reports, aerial photographs, and reconnaissance-level field observations. The method is based on observed associations between landslide concentrations and slope characteristics in 24 earthquakes that occurred in various parts of the world.

Bulletin of the Association of Engineering Geologi

Petroleum system and production characteristics of the Muddy (J) Sandstone (Lower Cretaceous) Wattenberg continuous gas field, Denver basin, Colorado

Wattenberg field is a continuous-type gas accumulation. Estimated ultimate recovery from current wells is 1.27 tcf of gas from the Lower Cretaceous Muddy (J) Sandstone. Mean gas resources that have the potential to be added to these reserves in the next 30 yr are 1.09 tcf; this will be primarily through infill drilling to recover a greater percentage of gas in place and to drain areas that are isolated because of geologic compartmentalization. Greatest gas production from the Muddy (J) Sandstone in Wattenberg field occurs (1) from within the most permeable and thickest intervals of Fort Collins Member delta-front and nearshore-marine sandstones, (2) to a lesser extent from the Horsetooth Member valley-fill channel sandstones, (3) in association with a large thermal anomaly that is delineated by measured temperatures in wells and by vitrinite reflectance contours of 0.9% and greater, (4) in proximity to the bounding Mowry, Graneros, and Skull Creek shales that are the hydrocarbon source rocks and reservoir seals, and (5) between the Lafayette and Longmont right-lateral wrench fault zones (WFZs) with secondary faults that act as conduits in areas of the field. The axis of greatest gas production is north 25 to 35 degrees northeast, which parallels the basin axis. Recurrent movement along five right-lateral WFZs that crosscut Wattenberg field shifted the Denver basin axis to the northeast and influenced depositional and erosional patterns of the reservoir and seal intervals. Levels of thermal maturity within the Wattenberg field are anomalously high compared to other areas of the Denver basin. The Wattenberg field thermal anomaly may be due to upward movement of fluids along faults associated with probable igneous intrusions. Areas of anomalous high heat flow within the field correlate with an increased and variable gas-oil ratio. Debra Higley has 5 years experience in uranium exploration and 20 years as a petroleum geologist with the U.S. Geological Survey. Her research interests include and integrate reservoir characterization, thermal maturation studies, and petroleum resource assessment in basins in North and South America. She received a B.S. degree in geology from Mesa State College (Colorado) and an M.S. degree in geochemistry and Ph.D. in geology from the Colorado School of Mines.Dave Cox is vice president of Reservoir Engineering for Questa Engineering in Golden, Colorado. He has 25 years experience in the oil and gas industry, primarily in reservoir engineering and property evaluations, and has analyzed reservoirs in 31 states of the United States and 19 other countries. He is an expert in coalbed methane, tight gas reservoirs, and enhanced oil recovery. He has B.S. and M.S. degrees in petroleum engineering from the Colorado School of Mines. Robert Weimer has taught courses in stratigraphy, regional and field geology, and energy resource exploration and development for 43 years. He earned B.A. and M.A. degrees from the University of Wyoming and his Ph.D. from Stanford University. He has been a visiting professor at universities in Calgary, Canada; Adelaide, Australia; and Bandung, Indonesia. He is currently professor emeritus, Colorado School of Mines. Weimer has been honored for teaching excellence, blending basic and applied research, national and international continuing education, and service to scientific societies and to state and national boards.

Colorado