SEARCH · USGS Science

Results for “Alaska Reflections”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

USGS2021

Evolution in eruptive style of the 2018 eruption of Veniaminof volcano, Alaska, reflected in groundmass textures and remote sensing

Variable eruptive style and explosivity is common in basaltic to basaltic andesite volcanoes but can have uncertain origins. Veniaminof volcano in the Alaska-Aleutian arc is a frequently active open-vent center, regularly producing Strombolian eruptions and small lava flows from an intracaldera cone within an intracaldera ice cap. The September–December 2018 eruption of Veniaminof evolved in explosivity over time. The eruption was documented with frequent satellite observations, syn- and post-eruption structure-from-motion photo surveys, and post-eruption sampling of lava flows and tephra preserved in the syn-eruption snowpack. Lava flows with a total volume of ~ 6 × 10 6 m 3 flowed down the cone flanks into the ice cap, overthickening at ice marginal flow fronts. Smaller tephra deposits were estimated at ~ 1–2 × 10 6 m 3 dense rock equivalent, with almost half of this volume deposited directly on the eruptive cone itself. Erupted products were basaltic andesite, and composition (54 ± 0.7 wt% bulk rock, 58 ± 0.7 wt% glass SiO 2 ), sideromelane microlite crystallinity (20–30%), and microlite number density (plagioclase 6.4 ± 2.6 × 10 5 n/mm 3 ) did not change significantly over the eruption suggesting a similar magma source and ascent rate. We defined tephra componentry with groundmass microcrystalline textures using backscatter electron images. The componentry of tephra groundmass showed significant increases in tachylite grains, defined here by the presence of dendritic interstitial nanolites, corresponding to increasing seismic tremor and periods of increased ash emissions. We suggest that these componentry changes reflect increasing undercooled zones on the conduit margins that increased brittle shearing, fragmentation, and ultimately ash emissions.

Alaska↗

USGS2000

Map of Distribution of Bottom Sediments on the Continental Shelf, Gulf of Alaska

Introduction The U.S. Geological Survey has a long history of exploring marine geology in the Gulf of Alaska. As part of a cooperative program with other federal and state agencies, the USGS is investigating the relations between ocean-floor geology and benthic marine biohabitats. This bottom sediment map, compiled from published literature will help marine biologists develop an understanding of sea-floor geology in relation to various biological habitats. The pattern of sea-floor sedimentation and bottom morphology in the Gulf of Alaska reflects a complex interplay of regional tectonism, glacial advances and retreats, oceanic and tidal currents, waves, storms, eustatic change, and gravity-driven processes. This map, based on numerous cruises during the period of 1970-1996, shows distribution of bottom sediments in areas of study on the continental shelf. The samples were collected with piston, box, and gravity corers, and grab samplers. The interpretations of sediment distribution are the products of sediment size analyses combined with interpretations of high-resolution seismic reflection profiles. The sea floor was separated into several areas as follows: Cook Inlet -- Hazards studies in this embayment emphasized sediment distribution, sediment dynamics, bedforms, shallow faults, and seafloor stability. Migrating mega-sandwaves, driven by strong tidal currents, influence seabed habitats and stability of the seafloor, especially near pipelines and drilling platforms. The coarseness of the bottom sediment reinforces the influence of the strong tidal currents on the seafloor habitats. Kodiak Shelf -- Tectonic framework studies demonstrate the development of an accretionary wedge as the Pacific Plate underthrusts the Alaskan landmass. Seismic data across the accretionary wedge reveal anomalies indicative of fluid/gas vent sites in this segment of the continental margin. Geologic hazards research shows that movement along numerous shallow faults poses a risk to sea floor structures. Sea-floor sediment on shallow banks is eroded by seasonal wave-generated currents. The winnowing action of the large storm waves results in concentrations of gravel over broad segments of the Kodiak shelf. Northeastern Gulf of Alaska -- Tectonic framework studies demonstrate that rocks of distant origin (Yakutat terrane) are currently attached to and moving with the Pacific Plate, as it collides with and is subducted beneath southern Alaska. This collision process has led to pronounced structural deformation of the continental margin and adjacent southern Alaska. Consequences include rapidly rising mountains and high fluvial and glacial sedimentation rates on the adjacent margin and ocean floor. The northeastern Gulf of Alaska shelf also has concentrations of winnowed (lag) gravel on Tarr Bank and on the outer shelf southeast of Yakutat Bay. Between Kayak Island and Yakutat Bay the outer shelf consists of pebbly mud (diamict). This diamict is a product of glacial marine sedimentation during the Pleistocene and is present today as a relict sediment. A prograding wedge of Holocene sediment consisting of nearshore sand grading seaward into clayey silt and silty clay covers the relict pebbly mud to mid-shelf and beyond. Shelf and slope channel systems transport glacially derived sediment across the continental margin into Surveyor Channel, an abyssal fan and channel system that reaches over 1,000 km to the Aleutian Trench.

Miscellaneous Field Studies Map↗

USGS2005

Studies by the U.S. Geological Survey in Alaska, 2004

The collection of six papers that follow continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation's needs for Earth-science information in Alaska. This professional paper is the first 'online only' version of Studies by the U.S. Geological Survey in Alaska, reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Professional Paper↗

USGS2006

Studies by the U.S. Geological Survey in Alaska, 2005

Summary The collection of papers that follows continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation’s needs for Earth-science information in Alaska. This professional paper is one of a series of “online only” versions of Studies by the U.S. Geological Survey in Alaska , reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Alaska↗

USGS2009

Studies by the U.S. Geological Survey in Alaska, 2007

The collection of papers that follow continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation's needs for Earth-science information in Alaska. This professional paper is one of a series of 'online only' versions of Studies by the U.S. Geological Survey in Alaska, reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Professional Paper↗

USGS2010

Studies by the U.S. Geological Survey in Alaska, 2008-2009

Professional Paper↗

USGS2011

Studies by the U.S. Geological Survey in Alaska, 2010

The collection of papers that follows continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation’s needs for Earth-science information in Alaska. This professional paper is one of a series of “online only” versions of Studies by the U.S. Geological Survey in Alaska , reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Alaska↗

USGS2012

Studies by the U.S. Geological Survey in Alaska, 2011

The collection of papers that follow continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation's needs for Earth-science information in Alaska. This professional paper is one of a series of "online only" versions of Studies by the U.S. Geological Survey in Alaska , reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Alaska↗

USGS2012

Thin, low‐velocity crust beneath the southern Yukon‐Tanana Terrane, east central Alaska: Results from Trans‐Alaska crustal transect refraction/wide‐angle reflection data

A seismic refraction/wide‐angle reflection survey for the Trans‐Alaska Crustal Transect program reveals a thin, reflective crust beneath the southern Yukon‐Tanana terrane (YTT) in east central Alaska. These data are the first detailed refraction survey of the southern YTT and compose a 130‐km‐long reversed profile along the Alaska and Richardson highways. Results from this study indicate that low‐velocity (≤ 6.4 km/s) rocks extend to approximately 27 km in depth. Based on these low velocities and an average Poisson's ratio of 0.23 determined for depths of ≤27 km, an overall silicic composition is interpreted for this portion of the crust beneath the Yukon‐Tanana terrane. From approximately 8 to 27 km depth the crust exhibits an increase in reflectivity. This middle to lower crustal reflectivity is modeled as alternating high‐ and low‐velocity lamellae with an average velocity of 6.1 km/s at 10 km depth to an average velocity of 6.4 km/s at 27 km depth. Beneath these reflective, low‐velocity rocks a 3‐ to 5‐km‐thick, 7.0 km/s basal crustal layer produces a prominent reflection that extends to offsets of up to 280 km. The crust‐mantle boundary, modeled at an average depth of 30 km, produces a variable PmP reflection, which may indicate lateral heterogeneity of this boundary, and a weak and emergent Pn refraction with a velocity of 8.2 km/s. We interpret the crustal section as follows: the low‐velocity rocks of the southern YTT extend from the surface to depths of approximately 10 km; underthrust Mesozoic flysch of the Kahiltna terrane, rocks of the Gravina arc, and basement of the Wrangellia(?) terrane extend from 10 to 27 km depth; a 3‐ to 5‐km‐thick layer of mantle‐derived mafic rocks, relic oceanic crust, or Wrangellia(?) terrane lower crust extends from 27 to approximately 30 km depth; a tectonically young Moho beneath the southern YTT is found at an average depth of 30 km; and it is underlain by a mantle that may be relatively cool and/or olivine rich. In this interpretation, the Yukon‐Tanana terrane is a thin‐skinned terrane. Our results indicate that tectonic, and possibly magmatic, underplating has played a significant role in crustal growth for central Alaska.

Alaska↗

USGS1994

Crustal velocity structure of the northern Yukon-Tanana upland, central Alaska: Results from TACT refraction/wide-angle reflection data

The Fairbanks North seismic refraction/ wide-angle reflection profile, collected by the U.S. Geological Survey Trans-Alaska Crustal Transect (TACT) project in 1987, crosses the complex region between the Yukon-Tanana and Ruby terranes in interior Alaska. This region is occupied by numerous small terranes elongated in a northeast-southwest direction. These seismic data reveal a crustal velocity structure that is divided into three upper-crustal and at least two middle- to lower-crustal domains. The upper-crustal domains are delineated by two steeply dipping low-velocity anomalies that are interpreted as signatures of the Victoria Creek fault, and the Beaver Creek fault or a fault buried by the Beaver Creek fault. This tripartite upper crust extends to 8-10 km depth where a subhorizontal interface undercuts the northern and central domains. Beneath the northern domain, this interface is interpreted as the southeastwardly dipping boundary between the Tozina and Ruby terranes. The continuation of this interface beneath the central domain suggests that it may represent the detachment or basal thrust for thin-skinned tectonic amalgamation of the terranes caught between the Yukon-Tanana and Ruby terranes. The lower crust and Moho reflection exhibit differences from north to south that define at least two lower-crustal domains, interpreted as the Yukon-Tanana and Ruby terranes. Finally, the crustal thickness along the profile is nearly uniform and ranges from 31 to 34 km. Our data suggest that after initial thin-skinned amalgamation of the various terranes, this region experienced thick-skinned tectonic reorganization via strike-slip faulting. This interpretation supports a model in which at least one strand of the Tintina fault exists in this important region of Alaska.

Alaska↗

USGS2021

A decade of Indigenous knowledge research in the Yukon River basin: Reflection on “Indigenous observations of change in the lower Yukon River basin, Alaska”

Herman-Mercer reflects on her first article" Indigenous Observations of Change in the Lower Yukon River Basin, Alaska." The observations and knowledge presented in this study have become part of an ever-growing catalog of studies representing, and part of a chorus of Indigenous communities across the Arctic and Subarctic conveying, the impacts of climate change in this region. The broad observations of environmental change reported in Indigenous Observations 2011, including impacts to subsistence and safety, are more dire and apparent than ten years ago when this article was published. Instances of diseased salmon continue to be reported by subsistence fishers, and the salmon runs have declined so severely since Indigenous Observations 2011 was published that there have been several years in which the commercial and or the subsistence salmon fishery was closed on the Yukon River, with impacts to household economies, food security, and culture. The then-new dangers associated with travel on river ice continue to be a concern across the Yukon River where the thinner river ice and inconsistent freeze up and break up have become the norm.

Alaska↗

USGS1996

Thermal evolution of sedimentary basins in Alaska

The complex tectonic collage of Alaska is reflected in the conjunction of rocks of widely varying thermal maturity. Indicators of the level of thermal maturity of rocks exposed at the surface, such as vitrinite reflectance and conodont color alteration index, can help constrain the tectonic evolution of such complex regions and, when combined with petrographic, modern heat flow, thermogeochronologic, and isotopic data, allow for the detailed evaluation of a region?s burial and uplift history. We have collected and assembled nearly 10,000 vitrinite-reflectance and conodont-color-alteration index values from the literature, previous U.S. Geological Survey investigations, and our own studies in Alaska. This database allows for the first synthesis of thermal maturity on a broadly regional scale. Post-accretionary sedimentary basins in Alaska show wide variability in terms of thermal maturity. The Tertiary interior basins, as well as some of the forearc and backarc basins associated with the Aleutian Arc, are presently at their greatest depth of burial, with immature rocks exposed at the surface. Other basins, such as some backarc basins on the Alaska Peninsula, show higher thermal maturities, indicating modest uplift, perhaps in conjunction with higher geothermal gradients related to the arc itself. Cretaceous ?flysch? basins, such as the Yukon-Koyukuk basin, are at much higher thermal maturity, reflecting great amounts of uplift perhaps associated with compressional regimes generated through terrane accretion. Many sedimentary basins in Alaska, such as the Yukon-Koyukuk and Colville basins, show higher thermal maturity at basin margins, perhaps reflecting greater uplift of the margins in response to isostatic unloading, owing to erosion of the hinterland adjacent to the basin or to compressional stresses adjacent to basin margins.

Alaska↗

USGS1999

Tidally generated sea-floor lineations in Bristol Bay, Alaska, USA

Highly reflective linear features occur in water depths of 20-30 m in northern Bristol Bay (Alaska, USA) and are, in places, over 600 m in length. Their length-to-width ratio is over 100:1. The lineations are usually characterized by large transverse ripples with wavelengths of 1-2 m. The lineations trend about N60??E, and are spaced between 20 and 350 m. Main tidal directions near the lineations are N60??E (flood) and S45??W (ebb), which are parallel to subparallel to the lineations. They suggest that the lineations may be tidally generated. The lineations may be bright sonar reflections from a winnowed lag concentrate of coarse sand.

Geo-Marine Letters↗

USGS1980

Seismic evidence for an extensive gas-bearing layer at shallow depth, offshore from Prudhoe Bay, Alaska

High resolution seismic reflection data recorded offshore from Prudhoe Bay, Alaska, were processed digitally to determine the reflectivity structure of the uppermost layers of the seafloor. A prominent reflector found at 27 m below the mudline (water depths 7-9 m) has a negative reflection coefficient greater than 0.5. The large acoustic impedance contrast, coupled with a report of gas encountered at a corresponding depth in a nearby drillhole, shows that the reflector is the upper boundary of a zone containing gas. The gas exists in sandy gravel capped by stiff, silty clay. Analysis of unprocessed conventional high-resolution records from the region indicates that the gas-bearing layer may extend over an area of at least 50 km at depths of 19-35 m below the mudline. Similar-appearing reflectors, previously unexplained, occur in patches over wide regions of the shelf where offshore oil development is beginning at a rapid pace. This suggests the exercise of caution with respect to possible hazards from shallow gas pockets.

Alaska↗

USGS1982

Rifting history and structural development of the continental margin north of Alaska

Seismic-reflection profiles in the Alaskan Beaufort Sea and onshore geology indicate that the continental margin north of Alaska is of Atlantic type. Rifting appears to have begun in earliest Jurassic time, about 190 to 185 m.y. ago, when crustal extension created a rift-valley system beneath the Beaufort shelf and part of the adjacent coastal plain. Subsequent crustal warming caused rift-margin uplift and erosion, created a breakup unconformity, and initiated breakup and seafloor spreading in the Canada Basin about 125 m.y. ago. Subsequent cooling caused rapid subsidence of the margin, which was followed by vigorous progradation of the present continental terrace of the Beaufort Sea beginning in Albian time.

Book chapter↗

USGS2015

Geologic map of Alaska

Summary This map and associated digital databases are the result of compilation and interpretation of published and unpublished 1:250,000-scale and limited 1:500,000- to 1:63,360-scale maps. Covering the entire state of Alaska, it reflects more than a century of work by a host of geologists and almost two decades of compilation work. There are two versions of the map: a detailed digital version, and a simplified, “generalized” map for print. The map units described in the accompanying pamphlet reflect those of the detailed digital map. At the end of each unit description, the generalized map unit for that unit is listed. Compilation of this map began in September 1996, using available 1:250,000-scale data to compile and release a regional map of central Alaska (Wilson and others, 1998). An ongoing iterative process was used to describe and correlate individual geologic units to produce the units for this statewide map and its interim products—a series of regional geologic map compilations—which were released as the process continued (in the references cited in the pamphlet that are shown with an *). As additional geologic data were acquired, previously released data, correlations, and interpretations were updated as needed. Compilation of this map was complex, because the original source maps were made by different generations of geologists, mapping with very different ideas. Several of the older maps were completed before the concepts of accreted (suspect) terranes or even plate tectonics existed. On the other hand, some of the more recent maps were so governed by terrane analysis that conventional stratigraphic nomenclature was not used or is obscured. We adopted a traditional stratigraphic approach and avoided use of the sometimes controversial and commonly inconsistently defined or applied terrane terminology. Our decision to adopt a traditional approach is evident in a map that emphasizes the age and lithology of map units, rather than differences among fault-bounded packages of rocks. We did our best to resolve conflicting interpretations and map data from the regional compilations and from the individual source maps in areas where regional compilations had not been produced. We made every effort to preserve the original geologic map information, incorporating, where available, new data, but we were careful to not overinterpret the geologic data. Yet even our willingness to make interpretations and revisions did not enable us in some areas to resolve mapping conflicts or to reconcile different mapping styles. Therefore, there are several areas on the map where map units are separated by “quadrangle boundary faults.” More data and fieldwork may allow resolution of these conflicts. This Alaska compilation is unique in that it is integrated with a rich database of information provided in the spatial datasets and standalone attribute databases. Within the spatial files every line and polygon is attributed to its original source; the references to these sources are contained in related tables, as well as in stand-alone tables. Additional attributes include typical lithology, geologic setting, and age range for the map units. Also included are tables of radiometric ages.

Alaska↗

USGS2012

A high-resolution seismic reflection/refraction study of the Chugach-Peninsular terrane boundary, southern Alaska

We present results from a high-resolution seismic refraction analysis of the shallow (approximately 2 km) crustal structure along the 107-km-long Trans-Alaska Crustal Transect Chugach reflection line in southern Alaska and a comparison with laboratory measurements of field samples. The refraction analysis includes the two-dimensional interpretation of several thousand first- and secondary-arrival travel times digitized from 1024-channel split-spread common shot gathers. The velocity model derived from this analysis better defines the location and geometry of terrane boundaries than does the normal incidence reflection section and agrees well with surface mapping of lithologies. Furthermore, the model predicts travel times within 100 ms of the reflection times recorded from the base of the Quaternary on the Chugach reflection section. Thicknesses of Quaternary deposits, with velocities between 1.1 and 2.0 km/s, correlate inversely with the quantity of observed lower crustal reflections on the Chugach section, suggesting that the presence or absence of these sediments in sufficient thickness exerted primary control on the quality of the deeper portion of the section. There is a significant velocity contrast between crystalline rocks across the Border Ranges fault (5.0 versus 5.6 km/s), the major contact between the Chugach and Peninsular terranes, in agreement with laboratory measurements of field specimens. In the Peninsular terrane the modeling indicates that an unnamed fault delimiting the southern flank of the Copper River Basin dips steeply northward at 50° and has about 1300 m of vertical offset. Laboratory measurements document a maximum velocity anisotropy of 20% for phyllitic schists of the Valdez Group in the Chugach terrane. In agreement with the observed E-W strike and near-vertical dip of the Valdez Group, we determined a significant (14%) velocity anisotropy for ray paths oriented N-S versus NE-SW.

Journal of Geophysical Research Solid Earth↗

USGS1975

Map showing paleocurrent and clast-size data from the Devonian-Mississippian Endicott Group, northern Alaska

The Devonian-Mississippian Endicott Group (Tailleur and others, 1967) is an important geologic unit in the Brooks Range of northern Alaska. It reflects a major tectonic event in the middle and late Paleozoic history of the North American Cordillera. Tailleur and Brosge (1970) interpreted the Endicott as a clastic wedge derived from land to the north during the Late Devonian and from land to the northeast during Early Mississippian, when a shallow sea transgressed the area. In the north-central and eastern parts of the range, the Endicott is composed of three formations, in ascending order, the Upper Devonian Hunt Fork Shale and Kanayut Conglomerate and the Lower Mississippian Kayak Shale; in the western part of the range, the stratigraphic relations of these formations with formations in the Endicott is uncertain. Donovan systematically collected paleocurrent and clast-size data from the Endicott Group along the Brooks Range for Mobil Oil Corporation in 1967 and 1968. In recognition of the general interest in the information, Mobil has permitted its release. I.L Tailleur summarized the regional geologic information.

Alaska↗