USGS Science⌕ Search

SEARCH · USGS Science

Results for “Advances in Geosciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS2008

Geophysical characterization of the American River levees, Sacramento, California, with electromagnetics, capacitively coupled resistivity, and DC resistivity

A geophysical characterization of a portion of American River levees in Sacramento, California was conducted in May, 2007. Targets of interest included the distribution and thickness of sand lenses that underlie the levees and the depth to a clay unit that underlies the sand. The concern is that the erosion of these sand lenses can lead to levee failure in highly populated areas of Sacramento. DC resistivity (Geometric’s OhmMapper and Advanced Geosciences, Inc.’s SuperSting R8 systems) and electromagnetic surveys (Geophex’s GEM-2) were conducted over a 6 mile length of the levee on roads and bicycle and horse trails. 2-D inversions were conducted on all the geophysical data. The OhmMapper and SuperSting surveys produced consistent inversion results that delineated potential sand and clay units. GEM-2 apparent resistivity data were consistent with the DC inversion results. However, the GEM-2 data could not be inverted due to low electromagnetic response levels, high ambient electromagnetic noise, and large system drifts. While this would not be as large a problem in conductive terrains, it is a problem for a small induction number electromagnetic profiling system such as the GEM-2 in a resistive terrain (the sand lenses). An integrated interpretation of the geophysical data acquired in this investigation is presented in this report that includes delineation of those areas consisting of predominantly sand and those areas consisting predominantly of clay. In general, along most of this part of the American River levee system, sand lenses are located closest to the river and clay deposits are located further away from the river. The interpreted thicknesses of the detected sand deposits are variable and range from 10 ft up to 60 ft. Thus, despite issues with the GEM-2 inversion, this geophysical investigation successfully delineated sand lenses and clay deposits along the American River levee system and the approximate depths to underlying clay zones. The results of this geophysical investigation should help the USACE to maintain the current levee system while also assisting the designers and planners of levee enhancements with the knowledge of what is to be expected from the near-surface geology and where zones of concern may be located.

California↗
USGS2000

The 1999 Southern California Seismic Network bulletin

The Pasadena office of the U.S. Geological Survey (USGS), together with the Caltech Seismological Laboratory, operates a network of more than 350 remote seismometers in southern California called the S outhern C alifornia S eismic N etwork (SCSN). SCSN is part of TriNet, a cooperative project between the USGS, Caltech, and the California Division of Mines and Geology (CDMG). The TriNet project is halfway completed and is upgrading the existing network to digital, adding new stations, and developing real-time and earthquake-alert capabilities. Signals from the SCSN sites are telemetered to a central processing location at the Caltech Seismological Lab in Pasadena. Computers that detect and record thousands of earthquakes each year continuously monitor these signals. Phase arrival times for these events are picked by analysts and are archived along with digital seismograms. Data acquisition, processing, and archiving are achieved using the Caltech/USGS Seismic Processing (CUSP) system ( Dollar, 1989 ). These data have been compiled into the SCSN Catalog of Earthquakes, a list beginning in 1932 that currently contains more than 356,300 events. Waveform, phase, and catalog data are archived by the Southern California Earthquake Center Data Center (SCEC_DC). This data set is critical to the evaluation of earthquake hazards in California and to the advancement of geoscience as a whole.

California↗
USGS2015

“Points requiring elucidation” about Hawaiian volcanism

Hawaiian volcanoes, which are easily accessed and observed at close range, are among the most studied on the planet and have spurred great advances in the geosciences, from understanding deep Earth processes to forecasting volcanic eruptions. More than a century of continuous observation and study of Hawai‘i's volcanoes has also sharpened focus on those questions that remain unanswered. Although there is good evidence that volcanism in Hawai‘i is the result of a high-temperature upwelling plume from the mantle, the source composition and dynamics of the plume are controversial. Eruptions at the surface build the volcanoes of Hawai‘i, but important topics, including how the volcanoes grow and collapse and how magma is stored and transported, continue to be subjects of intense research. Forecasting volcanic activity is based mostly on pattern recognition, but determining and predicting the nature of eruptions, especially in serving the critical needs of hazards mitigation, require more realistic models and a greater understanding of what drives eruptive activity. These needs may be addressed by better integration among disciplines as well as by developing dynamic physics- and chemistry-based models that more thoroughly relate the physiochemical behavior of Hawaiian volcanism, from the deep Earth to the surface, to geological, geochemical, and geophysical data.

Hawaii↗
USGS2022

What did they just say? Building a Rosetta stone for geoscience and machine learning

Modern advancements in science and engineering are built upon multidisciplinary projects that bring experts together from different fields. Within their respective disciplines, researchers rely on precise terminology for specific ideas, principles, methods, and theories. Hence, the potential for miscommunication is substantial, especially when common words have been adopted by one (or both) group(s) to represent very specific, precise, but, perhaps, different concepts. Under the best circumstances, misunderstanding key terms will lead toward a breakdown of efficiency. Under less optimal conditions, miscommunication will sow frustration, lead to errors, and inhibit scientific breakthroughs. Here, our research group of geoscientists and machine learning experts presents a process to help geoscientists understand the fundamentals of supervised learning by describing the general workflow (i.e., a conceptual pipeline) for supervised learning that must be understood by all the parties involved in a geoscience-machine learning endeavor. Terms critical for machine learning are introduced, defined, and used within the context of an overly simplified mock hydrological study to illustrate their appropriate usage, and then used again in the context of a published geothermal-machine learning study. These key terms are divided into two groups, which are 1) essential to the field of machine learning but are predominantly absent in geoscience or 2) homonyms (i.e., words with the same spelling or pronunciation but with different meanings) between the fields. Lastly, we discuss a few other important homonyms that were not introduced in the general workflow but arise regularly in machine learning applications

Conference Paper↗
USGS2022

Achievements and prospects of global broadband seismographic networks after 30 years of continuous geophysical observations

Global seismographic networks (GSNs) emerged during the late nineteenth and early twentieth centuries, facilitated by seminal international developments in theory, technology, instrumentation, and data exchange. The mid- to late-twentieth century saw the creation of the World-Wide Standardized Seismographic Network (1961) and International Deployment of Accelerometers (1976), which advanced global geographic coverage as seismometer bandwidth increased greatly allowing for the recording of the Earth's principal seismic spectrum. The modern era of global observations and rapid data access began during the 1980s, and notably included the inception of the GEOSCOPE initiative (1982) and GSN (1988). Through continual improvements, GEOSCOPE and the GSN have realized near-real time recording of ground motion with state-of-art data quality, dynamic range, and timing precision to encompass 180 seismic stations, many in very remote locations. Data from GSNs are increasingly integrated with other geophysical data (e.g., space geodesy, infrasound and Interferometric Synthetic Aperture Radar). Globally distributed seismic data are critical to resolving crust, mantle, and core structure; illuminating features of the plate tectonic and mantle convection system; rapid characterization of earthquakes; identification of potential tsunamis; global nuclear test verification; and provide sensitive proxies for environmental changes. As the global geosciences community continues to advance our understanding of Earth structure and processes controlling elastic wave propagation, GSN infrastructure offers a springboard to realize increasingly multi-instrument geophysical observatories. Here, we review the historical, scientific, and monitoring heritage of GSNs, summarize key discoveries, and discuss future associated opportunities for Earth Science.

Reviews of Geophysics↗
USGS2008

Rainfall-triggered landslides, anthropogenic hazards, and mitigation strategies

Rainfall-triggered landslides are part of a natural process of hillslope erosion that can result in catastrophic loss of life and extensive property damage in mountainous, densely populated areas. As global population expansion on or near steep hillslopes continues, the human and economic costs associated with landslides will increase. Landslide hazard mitigation strategies generally involve hazard assessment mapping, warning systems, control structures, and regional landslide planning and policy development. To be sustainable, hazard mitigation requires that management of natural resources is closely connected to local economic and social interests. A successful strategy is dependent on a combination of multi-disciplinary scientific and engineering approaches, and the political will to take action at the local community to national scale.

Advances in Geosciences↗
USGS2008

The critical role of volcano monitoring in risk reduction

Data from volcano-monitoring studies constitute the only scientifically valid basis for short-term forecasts of a future eruption, or of possible changes during an ongoing eruption. Thus, in any effective hazards-mitigation program, a basic strategy in reducing volcano risk is the initiation or augmentation of volcano monitoring at historically active volcanoes and also at geologically young, but presently dormant, volcanoes with potential for reactivation. Beginning with the 1980s, substantial progress in volcano-monitoring techniques and networks - ground-based as well space-based - has been achieved. Although some geochemical monitoring techniques (e.g., remote measurement of volcanic gas emissions) are being increasingly applied and show considerable promise, seismic and geodetic methods to date remain the techniques of choice and are the most widely used. Availability of comprehensive volcano-monitoring data was a decisive factor in the successful scientific and governmental responses to the reawakening of Mount St. Helens (Washington, USA) in 1980 and, more recently, to the powerful explosive eruptions at Mount Pinatubo (Luzon, Philippines) in 1991. However, even with the ever-improving state-ofthe-art in volcano monitoring and predictive capability, the Mount St. Helens and Pinatubo case histories unfortunately still represent the exceptions, rather than the rule, in successfully forecasting the most likely outcome of volcano unrest.

Advances in Geosciences↗
USGS2009

Volcanism and associated hazards: The Andean perspective

Andean volcanism occurs within the Andean Volcanic Arc (AVA), which is the product of subduction of the Nazca Plate and Antarctica Plates beneath the South America Plate. The AVA is Earth's longest but discontinuous continental-margin volcanic arc, which consists of four distinct segments: Northern Volcanic Zone, Central Volcanic Zone, Southern Volcanic Zone, and Austral Volcanic Zone. These segments are separated by volcanically inactive gaps that are inferred to indicate regions where the dips of the subducting plates are too shallow to favor the magma generation needed to sustain volcanism. The Andes host more volcanoes that have been active during the Holocene (past 10 000 years) than any other volcanic region in the world, as well as giant caldera systems that have produced 6 of the 47 largest explosive eruptions (so-called "super eruptions") recognized worldwide that have occurred from the Ordovician to the Pleistocene. <br><br> The Andean region's most powerful historical explosive eruption occurred in 1600 at Huaynaputina Volcano (Peru). The impacts of this event, whose eruptive volume exceeded 11 km 3 , were widespread, with distal ashfall reported at distances >1000 km away. Despite the huge size of the Huaynaputina eruption, human fatalities from hazardous processes (pyroclastic flows, ashfalls, volcanogenic earthquakes, and lahars) were comparatively small owing to the low population density at the time. In contrast, lahars generated by a much smaller eruption (<0.05 km 3 ) in 1985 of Nevado del Ruiz (Colombia) killed about 25 000 people - the worst volcanic disaster in the Andean region as well as the second worst in the world in the 20th century. The Ruiz tragedy has been attributed largely to ineffective communications of hazards information and indecisiveness by government officials, rather than any major deficiencies in scientific data. Ruiz's disastrous outcome, however, together with responses to subsequent hazardous eruptions in Chile, Colombia, Ecuador, and Peru has spurred significant improvements in reducing volcano risk in the Andean region. But much remains to be done.

Huaynaputina Volcano↗
USGS2014

Effects of 2010 Hurricane Earl amidst geologic evidence for greater overwash at Anegada, British Virgin Islands

A post-hurricane survey of a Caribbean island affords comparisons with geologic evidence for greater overwash at the same place. This comparison, though of limited application to other places, helps calibrate coastal geology for assessment of earthquake and tsunami potential along the Antilles Subduction Zone. The surveyed island, Anegada, is 120 km south of the Puerto Rico Trench and is near the paths of hurricanes Donna (1960) and Earl (2010), which were at or near category 4 when at closest approach. The survey focused on Earl's geologic effects, related them to the surge from Hurricane Donna, and compared them further with erosional and depositional signs of southward overwash from the Atlantic Ocean that dates to 1200–1450 AD and to 1650–1800 AD. The main finding is that the geologic effects of these earlier events dwarf those of the recent hurricanes. Hurricane Earl's geologic effects at Anegada, observed mainly in 2011, were limited to wrack deposition along many of the island's shores and salt ponds, accretion of small washover (spillover) fans on the south shore, and the suspension and deposition of microbial material from interior salt ponds. Earl's most widespread deposit at Anegada, the microbial detritus, was abundantly juxtaposed with evidence for catastrophic overwash in prior centuries. The microbial detritus formed an extensive coating up to 2 cm thick that extended into breaches in beach-ridge plains of the island's north shore, onto playas that are underlain by a sand-and-shell sheet that extends as much as 1.5 km southward from the north shore, and among southward-strewn limestone boulders pendant to outcrops as much as 1 km inland. Earl's spillover fans also contrast with a sand-and-shell sheet, which was dated previously to 1650–1800, by being limited to the island's south shore and by extending inland a few tens of meters at most. These findings complement those reported in this issue by Michaela Spiske and Robert Halley (Spiske and Halley, 2014), who studied a coral-rubble ridge that lines part of Anegada's north shore. Spiske and Halley attribute the ridge to storms that were larger than Earl. But they contrast the ridge with coral boulders that were scattered hundreds of meters inland by overwash in 1200–1450.

Anegada↗
USGS2021

Earthcasting: Geomorphic forecasts for society

Over the last several decades, the study of Earth surface processes has progressed from a descriptive science to an increasingly quantitative one due to advances in theoretical, experimental, and computational geosciences. The importance of geomorphic forecasts has never been greater, as technological development and global climate change threaten to reshape the landscapes that support human societies and natural ecosystems. Here we explore best practices for developing socially relevant forecasts of Earth surface change, a goal we are calling “earthcasting”. We suggest that earthcasts have the following features: they focus on temporal (∼1–∼100 years) and spatial (∼1 m–∼10 km) scales relevant to planning; they are designed with direct involvement of stakeholders and public beneficiaries through the evaluation of the socioeconomic impacts of geomorphic processes; and they generate forecasts that are clearly stated, testable, and include quantitative uncertainties. Earthcasts bridge the gap between Earth surface researchers and decision-makers, stakeholders, researchers from other disciplines, and the general public. We investigate the defining features of earthcasts and evaluate some specific examples. This paper builds on previous studies of prediction in geomorphology by recommending a roadmap for (a) generating earthcasts, especially those based on modeling; (b) transforming a subset of geomorphic research into earthcasts; and (c) communicating earthcasts beyond the geomorphology research community. Earthcasting exemplifies the social benefit of geomorphology research, and it calls for renewed research efforts toward further understanding the limits of predictability of Earth surface systems and processes, and the uncertainties associated with modeling geomorphic processes and their impacts.

Earth's Future↗
USGS2025

On the importance of geological and geophysical lunar field work enabled by Artemis Base Camp

We report on six Findings related to the benefit of Artemis Base Camp (ABC) to lunar geoscience (Figure 1). These Findings are on the topics of 1) Repeat field site visits; 2) Geological experiments; 3) Satellite ABC campus(es); 4) Advanced lab equipment; 5) Frequent and resource-intensive EVAs; and 6) Geoscience STEM engagement. Lastly, we consider certain issues and caveats meriting further study in any base camp architecture.

Report↗
USGS2007

Advances through collaboration: sharing seismic reflection data via the Antarctic Seismic Data Library System for Cooperative Research (SDLS)

The Antarctic Seismic Data Library System for Cooperative Research (SDLS) has served for the past 16 years under the auspices of the Antarctic Treaty (ATCM Recommendation XVI-12) as a role model for collaboration and equitable sharing of Antarctic multichannel seismic reflection (MCS) data for geoscience studies. During this period, collaboration in MCS studies has advanced deciphering the seismic stratigraphy and structure of Antarctica’s continental margin more rapidly than previously. MCS data compilations provided the geologic framework for scientific drilling at several Antarctic locations and for high-resolution seismic and sampling studies to decipher Cenozoic depositional paleoenvironments. The SDLS successes come from cooperation of National Antarctic Programs and individual investigators in “on-time” submissions of their MCS data. Most do, but some do not. The SDLS community has an International Polar Year (IPY) goal of all overdue MCS data being sent to the SDLS by end of IPY. The community science objective is to compile all Antarctic MCS data to derive a unified seismic stratigraphy for the continental margin – a stratigraphy to be used with drilling data to derive Cenozoic circum-Antarctic paleobathymetry maps and local-to-regional scale paleoenvironmental histories.

Open-File Report↗
USGS1980

Geoscientists for international development

Professional societies are usually concerned with the advancement of scientific knowledge, but a relative newcomer to the international scene has a different focus - geoscience development in the Third World. David Hastings, a member of AGID, explains.

The British Geologist↗
USGS2015

Diverting lava flows in the lab

Recent volcanic eruptions in Hawai'i, Iceland and Cape Verde highlight the challenges of mitigating hazards when lava flows threaten infrastructure. Diversion barriers are the most common form of intervention, but historical attempts to divert lava flows have met with mixed success and there has been little systematic analysis of optimal barrier design. We examine the interaction of viscous flows of syrup and molten basalt with barriers in the laboratory. We find that flows thicken immediately upslope of an obstacle, forming a localized bow wave that can overtop barriers. Larger bow waves are generated by faster flows and by obstacles oriented at a high angle to the flow direction. The geometry of barriers also influences flow behaviour. Barriers designed to split or dam flows will slow flow advance, but cause the flow to widen, whereas oblique barriers can effectively divert flows, but may also accelerate flow advance. We argue that to be successful, mitigation of lava-flow hazards must incorporate the dynamics of lava flow–obstacle interactions into barrier design. The same generalizations apply to the effect of natural topographic features on flow geometry and advance rates .

Nature Geoscience↗
USGS2023

Rapid estimation of minimum depth-to-bedrock from lidar leveraging deep-learning-derived surficial material maps

Previously glaciated landscapes often share similar surficial characteristics, including large areas of exposed bedrock, blankets of till deposits, and alluvium-floored valleys. These materials play significant roles in geologic and hydrologic resources, geohazards, and landscape evolution; however, the vast extents of many previously glaciated landscapes have rendered comprehensive, detailed field mapping difficult. While recent advances in remote sensing have facilitated mapping of surficial materials and landforms, manual map creation has remained a time-intensive task. The development of convolutional neural networks (CNNs) for image classification has provided a new opportunity for rapid characterization of digital elevation models, thus enabling efficient mapping of surficial materials and landforms. We have developed a methodology that leverages existing geologic maps and high-resolution (1–3 m) lidar data to train a U-Net CNN to classify alluvium and exposed bedrock in previously glaciated regions. Coupled with U.S. Geological Survey-developed geomorphometry tools capable of approximating stream incision depths, these classifications can be used to estimate the minimum thicknesses of stream-proximal hillslope sediments in areas where streams have undergone minimal incision into bedrock. We validate this approach in the context of the Neversink River watershed, a subbasin of the Delaware River Basin and significant water source for New York City. Evaluation of deep learning model performance demonstrates substantial agreement with manually drawn maps of alluvium and exposed bedrock. Validation of the minimum sediment thickness map using borehole data and passive seismic measurements shows the greatest performance for shallow materials and decreased performance in deep sediments, as well as in areas where bedrock exposures were too small to be resolved by lidar. To resolve these issues and create more accurate surficial maps, we are training new CNNs with additional geologic data and exploring advanced approaches for estimating depths of stream incision.

Delaware, New Jersey, New York, Pennsylvania↗
USGS2025

Critical Minerals in Ores (CMiO) database

Critical minerals are commodities essential to modern industrial and strategic technologies and are highly vulnerable to supply chain disruption. The Critical Minerals Mapping Initiative (CMMI) is a collaboration among the U.S. Geological Survey (USGS), the Geological Survey of Canada, and Geoscience Australia that aims to deepen global understanding of where critical minerals are located. A key output of this initiative is the Critical Minerals in Ores (CMiO) database that is advancing our collective understanding of critical minerals distributions. For instance, publicly available data on the concentrations of many critical minerals are sparse because these commodities can only be produced in small, yet essential, quantities compared to the primary commodities like copper and zinc. The CMiO database helps bridge this gap by offering high-quality, multielement geochemical data from a wide variety of critical mineral-bearing deposits around the world. Importantly, it uses a novel consensus deposit environment, group, and type classification scheme developed by the agencies that allows comparisons among ore deposits from different regions. The CMiO database contains geochemical data for more than 20,000 samples from more than 100 deposit types comprising 10 deposit environments.

Fact Sheet↗
USGS2024

Cathodoluminescence differentiates sedimentary organic matter types

High-resolution scanning electron microscopy (SEM) visualization of sedimentary organic matter is widely utilized in the geosciences for evaluating microscale rock properties relevant to depositional environment, diagenesis, and the processes of fluid generation, transport, and storage. However, despite thousands of studies which have incorporated SEM methods, the inability of SEM to differentiate sedimentary organic matter types has hampered the pace of scientific advancement. In this study, we show that SEM-cathodoluminescence (CL) properties can be used to identify and characterize sedimentary organic matter at low thermal maturity conditions. Eleven varied mudstone samples with a broad array of sedimentary organic matter types, ranging from the Paleoproterozoic to Eocene in age, were investigated. Sedimentary organic matter fluorescence intensity and CL intensity showed an almost one-to-one correspondence, with certain exceptions in three samples potentially related to radiolytic alteration. Therefore, because CL emission can be used as a proxy for fluorescence emission from sedimentary organic matter, CL emission during SEM visualization can be used to differentiate fluorescent from non-fluorescent sedimentary organic matter. This result will allow CL to be used as a visual means to quickly differentiate sedimentary organic matter types without employing correlative optical microscopy and could be widely and rapidly adapted for SEM-based studies in the geosciences.

Scientific Reports↗