USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environment and Resources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99Linked to original sources
USGS1998

Modeling of flood-deposited sand distributions in a reach of the Colorado River below the Little Colorado River, Grand Canyon, Arizona

A release from Glen Canyon Dam during March-April 1996 was designed to test the effectiveness with which the riparian environment could be renewed with discharges greatly in excess of the normal powerplant-restricted maximum. Of primary concern was the rebuilding of sand deposits along the channel sides that are important to the flora and fauna along the river corridor and that provide the only camp sites for riverside visitors to the Grand Canyon National Park. Analysis of the depositional processes with a model of flow, sand transport, and bed evolution shows that the sand deposits formed along the channel sides early during the high flow were affected only slightly by the decline in suspended-sand concentrations over the course of the controlled flood. Modeling results suggest that the removal of a large sand deposit over several hours was not a response to declining suspended-sand concentrations. Comparisons of the controlled-flood deposits with deposits formed during a flood in January 1993 on the Little Colorado River that contributed sufficient sand to raise the suspended-sand concentrations to predam levels in the main stem show that the depositional pattern as well as the magnitude is strongly influenced by the suspended-sand concentrations.

Water-Resources Investigations Report↗
USGS2021

Identifying sources of contaminants in urban stormwater and evaluation of their removal efficacy across a continuum of urban best management practices

Precipitation events in urban areas often result in stormwater runoff containing a diverse array of chemical contaminants. Although many traditional contaminants, such as nutrients, heavy metals, and polycyclic aromatic hydrocarbons have been studied extensively, only recently has evidence emerged showing that trace organic compounds (TrOCs), including pharmaceuticals, personal care products and pesticides are frequently found in stormwater runoff. As there is little existing information about the sources of TrOCs in urban stormwater or their removal efficacy across a range of stormwater treatment options, we conducted a study to address these knowledge gaps and to characterize the potential contribution of TrOCs to groundwater resources from stormwater infiltration practices, based on several synoptic measurements. The current study allowed us to enhance an existing effort to assess TrOC presence and toxicity in stormwater runoff and treatment pond outflow by addressing questions related to TrOC sources to stormwater and TrOC transport to groundwaters. Analysis of eDNA confirms multiple sources of TrOCs to stormwater including human sewage, dog waste, and feces from waterfowl. It is likely that the presence of some TrOCs detected in stormwater are the result of direct, untreated sewage inputs to stormwater from either human (i.e., leaking sewer infrastructure) or pet waste (washed from sidewalks into storm drains). The seasonal detection of avian eDNA is noteworthy as it highlights seasonality and patterns of migration patterns as contributing factors to stormwater contamination. In contrast to human and pet waste, which likely enters stormwater ponds via the stormwater conveyance system, avian feces may enter ponds either through stormwater runoff or through direct inputs by waterfowl stopping-over temporarily at stormwater ponds. Stormwater ponds had little effect in reducing TrOCs as determined by comparative inflow and outflow analysis. Our results also indicate that overall few TrOCs were present in receiving groundwater adjacent to underground infiltration basins, compared to inflow. However, some contaminants were present at relatively high concentrations compared to stormwater flowing into the basins. This is particularly true for pesticides and their degradants. Fewer TrOCs were detected in interstitial water collected near stormwater ponds compared to inflow and outflow. The presence and concentrations of TrOCs in outflow from ponds was generally similar to or higher than what was observed in inflow. The data collected as part of this study can be used to guide future research or monitoring in an effort to better understand TrOC fate and transport in the environment via stormwater BMPs. Specifically, more work is needed to track parcels of water as they flow through BMPs to better quantify transport and degradation of TrOCs, monitor flow into and out of ponds for mass balance calculations, and conduct tracer tests to better quantify the amount of water that monitoring wells are intercepting from underground infiltration basins. These results have been shared in multiple presentations and in meetings with high school teachers to develop age-appropriate curriculum to highlight the role of individuals in reducing and preventing stormwater contamination. The ongoing pandemic hindered some of these efforts (cancelled conferences; suspended MN Water Roundtable meetings; pre-occupation with teachers moving materials online), however, as dissemination activities become more common in the near future, we will continue to educate stakeholders and educators about the root causes and effects of urban stormwater contamination.

Minnesota↗
USGS2021

Using heat to trace vertical water fluxes in sediment experiencing concurrent tidal pumping and groundwater discharge

Heat has been widely applied to trace groundwater‐surface water exchanges in inland environments, but it is infrequently applied in coastal sediment where head oscillations induce periodicity in water flux magnitude/direction and heat advection. This complicates interpretation of temperatures to estimate water fluxes. We investigate the convolution of thermal and hydraulic signals to assess the viability of using heat as a tracer in environments with tidal head oscillations superimposed on submarine groundwater discharge. We first generate sediment temperature and head time series for conditions ranging from no tide to mega‐tidal using a numerical model (SUTRA) forced with periodic temperature and tidal head signals. We then analyze these synthetic temperature time series using heat tracing software (VFLUX2 and 1DTempPro) to evaluate if conventional terrestrial approaches to infer fluxes from temperatures are applicable for coastal settings. We consider high‐frequency water flux variability within a tidal signal and averaged over tidal signals. Results show that VFLUX2 analytical methods reasonably estimated the mean discharge fluxes in most cases but could not reproduce the flux variability within tidal cycles. The model results further reveal that high‐frequency time series of water fluxes varying in magnitude and direction can be accurately estimated if paired temperature and hydraulic head are analyzed using numerical models (e.g. 1DTempPro) that consider both dynamic hydraulic gradients and thermal signals. These results point to the opportunity to incorporate pressure sensors within heat tracing instrumentation to better assess sub‐daily flux oscillations and associated reactive processes.

Water Resources Research↗
USGS1996

Hydrogeologic setting and simulation of pesticide fate and transport in the unsaturated zone of a regolith-mantled, carbonate-rock terrain near Newville, Pennsylvania

Physical and chemical data were collected from May 1991 through April 1993 at a 4.5 hectare field site in Cumberland County, Pa., about 5 kilometers southeast of Newville. These data were used to define the hydrogeologic setting of a field site representative of the intensively farmed carbonate valleys of southeastern and south-central Pennsylvania. The environmental processing of commonly used pesticides (herbicides, fungicides, and insecticides) in the unsaturated zone was simulated with a process- oriented digital model to evaluate the environmental fate and transport of pesticides to ground water. Site data and modelling results provide a basis for a discussion of water-quality implications of agricultural best-management practices. The carbonate valleys of Pennsylvania comprise regolith-mantled carbonate-rock terrains that consist of broad undulating upland areas dissected by mostly dry valleys and widely spaced spring-fed creeks. The upland areas are farmed and exhibit possess a doline karst topography with many closed depressions, sinkholes, and bedrock outcrops. Unsaturated materials at the field site consist of an almost continuous soil cover composed of fine-grained residuum underlain by an intermediate vadose zone composed of karstified limestone. Soils are absent on scattered bedrock outcrops and are more than 12 meters thick in other areas of the site. The soil profile stores appreciable quantities of water with a volumetric average of about 36 percent water at field capacity. Organic carbon content of soil materials is about 1.7 percent in the Ap-horizon and from 0.1 to 0.3 percent throughout the full thickness of the B- and C-horizons. Atrazine, metolachlor, simazine, and the atrazine soil metabolites deethylatrazine and deisopropylatrazine were detected at concentrations above 0.05 mg/L in just the upper 0.6 meters of soil materials. However, detectable concentrations of atrazine, simazine, and atrazine soil metabolites were measured in water samples from lysimeters installed in soil materials at depths of 1.2, 2.1, and 3.7 meters and from monitor wells completed in the saturated zone to depths of 122 meters. Data collected from the field site were used to configure a pesticide screening model based on the pesticide version of the leaching estimation and chemistry model (LEACHP) developed by Wagenet and Hutson (1987). Model simulations show that most field-applied pesticides volatilize to the atmosphere, accumulate in soils, degrade in the subsurface environment, or leach to ground water. Model results were used to rank the leaching potentials of 66 pesticides. Eighteen of 32 herbicides, 4 of 9 fungicides, and 10 of 25 insecticides have moderate to large potential for leaching to ground water. A review of available pesticide monitoring data suggests that many compounds given moderate or high leaching potentials have not been tested for in ground water and the presence of pesticides in Pennsylvania's ground water may be underreported. Monitoring data do not exist for more than two-thirds of the pesticide compounds currently used in agricultural, carbonate areas of Pennsylvania. Knowledge of processes that govern fate and transport of pesticides is needed to facilitate development of effective pesticide best-management practices. In addition to comprehensive monitoring for pesticides and pesticide degradation products in ground water downgradient of areas of pesticide use, improved (1) characterization of unsaturated flow and transport through regolith mantled carbonate rocks, (2) estimates of pesticide degradation rates, (3) understanding of soil-property controls on pesticide movement, and (4) management models developed from process-oriented research would aid in understanding the processes.

Water-Resources Investigations Report↗
USGS2001

Occurrence and distribution of organochlorine pesticides, polychlorinated biphenyls, and trace elements in fish tissue in the lower Tennessee River basin, 1980-98

The U.S. Geological Survey, as part of the National Water-Quality Assessment Program, evaluated the occurrence and distribution of organochlorine pesticides, polychlorinated biphenyls, and trace elements in fish tissue in samples collected in the lower Tennessee River Basin study unit. Fish tissue analysis provides a time-averaged measurement of contaminants as well as a direct measurement of the contaminants that bioaccumulate in fish tissue. Bioaccumulation of contaminants in fish tissue may result in concentrations that can affect human, wildlife, or aquatic health. Data for two types of tissue analyses were evaluated to assess the occurrence and distribution of contaminants: whole fish for organochlorine pesticides and polychlorinated biphenyls and fish fillets for organochlorine pesticides, polychlorinated biphenyls, and trace elements. The fish tissue data analyzed for this study cover an 18-year span including data collected in 1998 by the U.S. Geological Survey as part of the National Water-Quality Assessment Program; data collected from 1980 through 1997 by the Tennessee Valley Authority; and data collected from 1992 through 1997 by the Tennessee Department of Environment and Conservation. Concentration data for constituents that are on the U.S. Environmental Protection Agency Priority Pollutant List were summarized and compared against existing action levels or guidelines.From the list of organochlorine pesticide compounds analyzed, p,p'-dichlorodiphenyldichloroethylene (p,p'-DDE), a breakdown product of dichlorodiphenyltrichloroethane (DDT), was the most commonly detected compound with detections at 83 percent of the sites sampled. Eleven p,p'-DDE samples exceeded action levels or guidelines with concentrations ranging from 0.20 to 12.8 milligrams per kilogram. Five other organochlorine compounds, p,p'-dichlorodiphenyldichloroethane (p,p'-DDD), dieldrin, endrin, chlordane, and polychlorinated biphenyls, also exceeded action levels and guidelines, but the detection frequencies at sampling sites generally were less than 70 percent. Mercury, the only trace element to exceed a guideline, was detected at 51 of 102 sites sampled for trace elements. Selenium was detected in fish fillet samples from 70 of 102 sites sampled, which was more sites than for any other trace element; however, selenium did not exceed the 50 micrograms per gram U.S. Environmental Protection Agency screening criteria. Arsenic and cadmium also were detected at 44 and 54 percent of the sampling sites, respectively.

Water-Resources Investigations Report↗
USGS2024

Discerning sediment provenance in the Outer Banks (USA) through detrital zircon geochronology

Detrital zircon data from modern barrier island and estuarine environments in the Outer Banks (Atlantic Coast, USA) were statistically compared to sands from nearby rivers to assist in determining source-to-sink pathways. Fluvial samples, collected from near the Fall Line contact between the Appalachian Orogen and sediments of the coastal plain, all have age unique distributions, making them ideal for tracing provenance. Three samples from the Atlantic foreshore showed high similarities to one another, as well as to three samples from the estuarine (back-barrier) Pamlico and Albemarle Sounds. Mixture modeling with multiple data reduction methods and three different statistical tests for similarity consistently indicated that the nearby Potomac River was the primary source for all Atlantic foreshore and estuarine zircons, followed by minor contributions from the James River in some models. The models indicate little or no sediment contribution from the Susquehanna, Roanoke, Tar, Neuse, Cape Fear, and Peedee Rivers. Both Atlantic foreshore and estuarine sands are therefore interpreted to have initially originated from Appalachian bedrock to the north of their present-day location, and subsequently to have been transported southward through the Chesapeake Bay watershed before deposition in Virginia and North Carolina. Prior to barrier island formation in the last several thousand years, differing geomorphology of the Chesapeake Bay facilitated southward movement of sediments from its constituent rivers via longshore drift, where they were deposited in coastal settings on the mainland. The modern barrier islands, formed during the most recent post-glacial transgression, may be reworked from these deposits, but may also include a contribution from sediments that were derived more recently from relict deposits on the shelf. Oceanographic and sedimentological evidence suggests that movement of sand-sized grains from southern rivers across the back-barrier sounds is unlikely. These findings can assist with coastal resilience planning and resource management in a region under severe threat from climate change and rising sea levels.

North Carolina, Virgina↗
USGS2024

Integrated science for the study of microplastics in the environment—A strategic science vision for the U.S. Geological Survey

Executive Summary Evidence of the widespread occurrence of microplastics throughout our environment and exposure to humans and other organisms over the past decade has led to questions about the possibility of health hazards and mitigation of exposures. This document discusses nanoplastics as well as microplastics (referred to solely as microplastics); the microplastics have a range from 1 micrometer to 5 millimeters (1 μm–5 mm) in length, whereas the nanoplastics are less than 1 μm in length (sidebar ES1). A myriad of environmental exposure pathways with microplastics to humans and wildlife, including ingestion, inhalation, and bodily absorption, are likely to exist. A growing body of evidence has documented bioaccumulation of microplastics in tissues and organs of humans and wildlife, benthic community effects, and potential nutritional and reproductive effects in some wildlife species. Understanding if or when environmental exposures pose a health risk is complicated by the diversity of microplastic sizes, morphologies, polymer types, and chemicals added during manufacturing or sorbed from the environment; ongoing challenges in analytical methods used to detect, quantify, and characterize microplastics and associated chemicals in our ecosystems; and the fact that ecotoxicological studies regarding microplastics are still in their infancy. Therefore, the study of environmental exposures and potential related health hazards of microplastics to the public and wildlife is a One Health (sidebar ES2) research topic that necessitates integrated science approaches. A better understanding of the sources, pathways, fate, and biological effects of microplastics has become a priority of the Federal Government, State governments, Tribes, stakeholders, and the public. Examples of Federal and State microplasticfocused legislation and programs to prioritize microplastic research and reduction include the Federal Microbead-Free Waters Act of 2015, California Senate Bills 1422 and 1263 (2018), the U.S. Environmental Protection Agency (EPA) Trash Free Waters Program, the National Institute of Standards and Technology’s Microplastic and Nanoplastic Metrology project, and Minnesota’s microplastic project. With its unique expertise and capabilities, the U.S. Geological Survey (USGS) is well positioned to help fill some of the most important microplastic science gaps. This strategic science vision document for microplastics identifies current (2023) microplastic science gaps and prioritizes research relevant to the mission, expertise, and capabilities of the USGS. It is intended for USGS scientists and stakeholders to use as a starting point for planning, prioritizing, and designing collaborative environmental microplastic science. Many of the microplastic science gaps and priorities are scalable, from local to national, and thus, can be made commensurate with available funding and evolving analytical and field tools, laboratory capacity, and stakeholder needs. Current (2023) or future research by academia and other Federal or State agencies, and Tribes may be aimed at some of the same microplastic science gaps identified in this document. Therefore, this document can be used as an information resource to maximize strengths and capabilities and minimize redundancy in communication and collaboration.

Circular↗
USGS2009

Obtaining parsimonious hydraulic conductivity fields using head and transport observations: A Bayesian geostatistical parameter estimation approach

Flow path delineation is a valuable tool for interpreting the subsurface hydrogeochemical environment. Different types of data, such as groundwater flow and transport, inform different aspects of hydrogeologic parameter values (hydraulic conductivity in this case) which, in turn, determine flow paths. This work combines flow and transport information to estimate a unified set of hydrogeologic parameters using the Bayesian geostatistical inverse approach. Parameter flexibility is allowed by using a highly parameterized approach with the level of complexity informed by the data. Despite the effort to adhere to the ideal of minimal a priori structure imposed on the problem, extreme contrasts in parameters can result in the need to censor correlation across hydrostratigraphic bounding surfaces. These partitions segregate parameters into facies associations. With an iterative approach in which partitions are based on inspection of initial estimates, flow path interpretation is progressively refined through the inclusion of more types of data. Head observations, stable oxygen isotopes ( 18 O/ 16 O ratios), and tritium are all used to progressively refine flow path delineation on an isthmus between two lakes in the Trout Lake watershed, northern Wisconsin, United States. Despite allowing significant parameter freedom by estimating many distributed parameter values, a smooth field is obtained.

Water Resources Research↗
USGS2010

Groundwater transport of strontium 90 in a glacial outwash environment

As part of the investigation of groundwater contamination at a uranium-scrap recovery plant at Wood River Junction, Rhode Island, laboratory experiments led to the development of a model for predicting the transport of strontium 90 in glacial outwash sediments based on an approximate mechanism for ion exchange. The multicomponent system was simplified to two components by regarding all exchangeable cations other than strontium 90 as a single component. The binary ion-exchange parameter was a function of the variable, total ion concentration. A one-dimensional solute transport model was formulated to evaluate the time necessary for natural groundwater flow to remove the strontium 90 contamination plume from the groundwater system to the Pawcatuck River. The finite difference transport equations were solved sequentially for total ion concentrations, then strontium 90 concentrations. Clay-free quartz and feldspar sands at the study site have little potential for strontium 90 sorption, and high calcium, magnesium, and sodium concentrations compete for the few ion exchange sites. As the total ion concentration plume moves out of the system, ion exchange of strontium 90 increases, reducing the strontium 90 concentration in the groundwater. Cleanout times predicted using the binary ion exchange mechanism were about two thirds of those predicted using a constant distribution coefficient. It is suggested that this type of model can simulate solute transport more realistically in many groundwater systems where the total ion concentration is not constant.

Rhode Island↗
USGS2015

Air- and stream-water-temperature trends in the Chesapeake Bay region, 1960-2014

Water temperature is a basic, but important, measure of the condition of all aquatic environments, including the flowing waters in the streams that drain our landscape and the receiving waters of those streams. Climatic conditions have a strong influence on water temperature, which is therefore naturally variable both in time and across the landscape. Changes to natural water-temperature regimes, however, can result in a myriad of effects on aquatic organisms, water quality, circulation patterns, recreation, industry, and utility operations. For example, most species of fish, insects, and other organisms, as well as aquatic vegetation, are highly dependent on water temperature. Warming waters can result in shifts in floral and faunal species distributions, including invasive species and pathogens previously unable to inhabit the once cooler streams. Many chemical processes are temperature dependent, with reactions occurring faster in warmer conditions, leading to degraded water quality as contaminants are released into waterways at greater rates. Circulation patterns in receiving waters, such as bays and estuaries, can change as a result of warmer inflows from streams, thereby affecting organisms in those receiving waters. Changes in abundance of some aquatic species and (or) degradation of water quality can reduce the recreational value of water bodies as waters are perceived as less desirable for water-related activities or as sportfish become less available for anglers. Finally, increasing water temperatures can affect industry and utilities as the thermal capacity is reduced, making the water less effective for cooling purposes. Chesapeake Bay is the largest estuary in the United States. Eutrophication, the enrichment of a water body with excess nutrients, has plagued the bay for decades and has led to extensive restoration efforts throughout the bay watershed. The warming of stream water can exacerbate eutrophication through increased release of nutrients from in-stream sediments, so understanding changes in stream-water temperature throughout the bay watershed is critical to resource managers seeking to restore the bay ecosystem. The U.S. Environmental Protection Agency (EPA) uses indicators that “represent the state or trend of certain environmental or societal conditions … to track and better understand the effects of changes in the Earth’s climate” (U.S. Environmental Protection Agency, 2014). Updates to these indicators are published biennially by the EPA. The U.S. Geological Survey (USGS), in cooperation with the EPA, has completed analyses of air- and stream-water-temperature trends in the Chesapeake Bay region to be included as an indicator in a future release of the EPA report.

Delaware, Maryland, New York, Pennsylvania, Virgin↗
USGS2001

Critical habitat for ovigerous Dungeness crabs

The Dungeness crab, Cancer magister , supports an important fishery in the northeastern Pacific Ocean, yet there is limited knowledge of ovigerous female brooding locations and brooding behavior. Our earlier research suggests that ovigerous crabs aggregate at the same brooding locations for many years. Within these locations, ovigerous females occur in high densities, with the majority of the aggregation buried within the sediment. These locations often have similar water depths and sediment types and appear to be critical for this life history stage. Our study was designed to examine the bathymetric distribution of Dungeness crabs in bays with and without sea otters at eight locations within the Glacier Bay area by conducting transects with a video-equipped manned submersible. Two of the bays investigated contained large aggregations of ovigerous females. At both sites the substrate was composed primarily of sand. However, only a small percentage of the 33 km of transects were classified as sand. These data suggest that sand substrate may be a limiting resource. Since crab brooding aggregations represent a large portion of the crab population within a small area, and because they are a critical component of Dungeness life history, areas with these characteristics need to be investigated, mapped, and protected from development or exploitation. The areas requiring protection from the impact of anthropogenic wastes, fishing, and logging activities could be quite small, thus limiting conflict with alternative users.

Conference Paper↗
USGS2001

An evaluation of borehole flowmeters used to measure horizontal ground-water flow in limestones of Indiana, Kentucky, and Tennessee, 1999

Three borehole flowmeters and hydrophysical logging were used to measure ground-water flow in carbonate bedrock at sites in southeastern Indiana and on the west-central border of Kentucky and Tennessee. The three flowmeters make point measurements of the direction and magnitude of horizontal flow, and hydrophysical logging measures the magnitude of horizontal flowover an interval. The directional flowmeters evaluated include a horizontal heat-pulse flowmeter, an acoustic Doppler velocimeter, and a colloidal borescope flowmeter. Each method was used to measure flow in selected zones where previous geophysical logging had indicated water-producing beds, bedding planes, or other permeable features that made conditions favorable for horizontal-flow measurements. Background geophysical logging indicated that ground-water production from the Indiana test wells was characterized by inflow from a single, 20-foot-thick limestone bed. The Kentucky/Tennessee test wells produced water from one or more bedding planes where geophysical logs indicated the bedding planes had been enlarged by dissolution. Two of the three test wells at the latter site contained measurable vertical flow between two or more bedding planes under ambient hydraulic head conditions. Field measurements and data analyses for each flow-measurement technique were completed by a developer of the technology or by a contractor with extensive experience in the application of that specific technology. Comparison of the horizontal-flow measurements indicated that the three point-measurement techniques rarely measured the same velocities and flow directions at the same measurement stations. Repeat measurements at selected depth stations also failed to consistently reproduce either flow direction, flow magnitude, or both. At a few test stations, two of the techniques provided similar flow magnitude or direction but usually not both. Some of this variability may be attributed to naturally occurring changes in hydraulic conditions during the 1-month study period in August and September 1999. The actual velocities and flow directions are unknown; therefore, it is uncertain which technique provided the most accurate measurements of horizontal flow in the boreholes and which measurements were most representative of flow in the aquifers. The horizontal heat-pulse flowmeter consistently yielded flow magnitudes considerably less than those provided by the acoustic Doppler velocimeter and colloidal borescope. The design of the horizontal heat-pulse flowmeter compensates for the local acceleration of ground-water velocity in the open borehole. The magnitude of the velocities estimated from the hydrophysical logging were comparable to those of the horizontal heat-pulse flowmeter, presumably because the hydrophysical logging also effectively compensates for the effect of the borehole on the flow field and averages velocity over a length of borehole rather than at a point. The acoustic Doppler velocimeter and colloidal borescope have discrete sampling points that allow for measuring preferential flow velocities that can be substantially higher than the average velocity through a length of borehole. The acoustic Doppler velocimeter and colloidal borescope also measure flow at the center of the borehole where the acceleration of the flow field should be greatest. Of the three techniques capable of measuring direction and magnitude of horizontal flow, only the acoustic Doppler velocimeter measured vertical flow. The acoustic Doppler velocimeter consistently measured downward velocity in all test wells. This apparent downward flow was attributed, in part, to particles falling through the water column as a result of mechanical disturbance during logging. Hydrophysical logging yielded estimates of vertical flow in the Kentucky/Tennessee test wells. In two of the test wells, the hydrophysical logging involved deliberate isolation of water-producing bedding planes with a packer to ensure that small horizontal flow could be quantified without the presence of vertical flow. The presence of vertical flow in the Kentucky/Tennessee test wells may preclude the definitive measurement of horizontal flow without the use of effective packer devices. None of the point-measurement techniques used a packer, but each technique used baffle devices to help suppress the vertical flow. The effectiveness of these baffle devices is not known; therefore, the effect of vertical flow on the measurements cannot be quantified. The general lack of agreement among the point-measurement techniques in this study highlights the difficulty of using measurements at a single depth point in a borehole to characterize the average horizontal flow in a heterogeneous aquifer. The effective measurement of horizontal flow may depend on the precise depth at which measurements are made, and the measurements at a given depth may vary over time as hydraulic head conditions change. The various measurements also demonstrate that the magnitude and possibly the direction of horizontal flow are affected by the presence of the open borehole. Although there is a lack of agreement among the measurement techniques, these results could mean that effective characterization of horizontal flow in heterogeneous aquifers might be possible if data from many depth stations and from repeat measurements can be averaged over an extended time period. Complications related to vertical flow in the borehole highlights the importance of using background logging methods like vertical flowmeters or hydrophysical logging to characterize the borehole environment before horizontal-flow measurements are attempted. If vertical flow is present, a packer device may be needed to acquire definitive measurements of horizontal flow. Because hydrophysical logging provides a complete depth profile of the borehole, a strength of this technique is in identifying horizontal- and vertical-flow zones in a well. Hydrophysical logging may be most applicable as a screening method. Horizontal- flow zones identified with the hydrophysical logging then could be evaluated with one of the point-measurement techniques for quantifying preferential flow zones and flow directions. Additional research is needed to determine how measurements of flow in boreholes relate to flow in bedrock aquifers. The flowmeters may need to be evaluated under controlled laboratory conditions to determine which of the methods accurately measure ground-water velocities and flow directions. Additional research also is needed to investigate variations in flow direction with time, daily changes in velocity, velocity corrections for fractured bedrock aquifers and unconsolidated aquifers, and directional differences in individual wells for hydraulically separated flow zones.

Indiana, Kentucky, Tennessee↗
USGS2024

Limitations of invasive snake control tools in the context of a new invasion on an island with abundant prey

In October 2020, a new population of invasive brown treesnakes ( Boiga irregularis ) was discovered on the 33-ha Cocos Island, 2.5 km off the south coast of Guam. Cocos Island is a unique conservation resource, providing refuge for many lizards and birds, including endangered species, which were extirpated from mainland Guam by invasive predators including brown treesnakes. We sought to evaluate the usefulness of toxic baiting with acetaminophen-treated carrion baits and cage trapping, common tools for the control of brown treesnakes on mainland Guam, as potential eradication tools on Cocos Island. We evaluated multiple bait types and bait presentations: on the ground, suspended in the canopy emulating aerial bait applications and in four plastic-tube bait station configurations intended to exclude non-target species. We monitored all baits with time-lapse cameras. Despite improved exclusion of non-targets by bait station design, most baits were quickly removed by non-target species, particularly coconut crabs ( Birgus latro ) and Mariana monitors ( Varanus tsukamotoi ). Monitoring of 1,250 baits available for 2,427 bait nights resulted in no observations of brown treesnakes taking any bait. Subsequently, we tested two trap types commonly used on Guam and compared trapping success with live versus dead mouse lures. In 10,553 trap nights using live and dead mouse lures, we only captured one brown treesnake, in a trap with a live mouse lure. These baiting and trapping rates are so low as to be ineffectual for all practical purposes. Concurrent visual searching and hand capture of brown treesnakes during initial rapid response efforts demonstrates that these low baiting and trapping success rates are not a result of low snake density. We make a case for our assumption that the ineffectiveness of these tools on Cocos Island is due to the context of extremely high abundance of preferred live prey, primarily large geckos and birds. Our results have profound conservation ramifications, because any future island invasions by brown treesnakes are likely to occur within similarly prey-rich environments where these baiting and trapping methods might be similarly ineffective.

NeoBiota↗
USGS2025

Tracking the sources of metals to the San Juan River, Four Corners Region, USA: An introduction to the thematic issue

Surface water quantity and quality is important for arid and semi-arid regions where many people, including underserved and Indigenous communities, rely on a scarce resource for drinking water, irrigation, livestock and ceremonial uses. The southwestern United States, and specifically the Four Corners Region (Colorado, Arizona, New Mexico and Utah), is an example of this situation. Elevated concentrations of metals including aluminium, arsenic and lead were identified in previous studies and this study in the San Juan River from below the Navajo Dam, through the Navajo Nation to Mexican Hat, Utah. An interdisciplinary team applied approaches and principles of geology, geochemistry, geomorphology, hydrology and statistics to gain a better understanding of the tributaries supplying the source(s) of metals to the San Juan River. This introductory paper provides an overview of the ‘Metal geochemical fingerprinting to identify sub-watershed source contributions to surface water at a regional arid watershed scale, Four Corners Region, USA’ thematic collection . An overview of sampling sites, techniques and potential sources of metals is provided. Approaches used in this study could be applied to investigations in similar systems globally.

Four Corners region↗
USGS2002

Prioritizing conservation potential of arid-land montane natural springs and associated riparian areas

Using inventory data and input from natural resource professionals, we developed a classification system that categorizes conservation potential for montane natural springs. This system contains 18 classes based on the presence of a riparian patch, wetland species, surface water, and evidence of human activity. We measured physical and biological components of 276 montane springs in the Oscura Mountains above 1450 m and the San Andres Mountains above 1300 m in southern New Mexico. Two of the 18 classes were not represented during the inventory, indicating the system applies to conditions beyond the montane springs in our study area. The class type observed most often (73 springs) had a riparian patch, perennial surface water, and human evidence. We assessed our system in relation to 13 other wetland and riparian classification systems regarding approach, area of applicability, intended users, validation, ease of use, and examination of system response. Our classification can be used to rapidly assess priority of conservation potential for isolated riparian sites, especially springs, in arid landscapes. We recommend (1) including this classification in conservation planning, (2) removing deleterious structures from high-priority sites, and (3) assessing efficiency and use of this classification scheme elsewhere. ?? 2002 Elsevier Science Ltd.

Journal of Arid Environments↗
USGS2016

Mercury in western North America: A synthesis of environmental contamination, fluxes, bioaccumulation, and risk to fish and wildlife

Western North America is a region defined by extreme gradients in geomorphology and climate, which support a diverse array of ecological communities and natural resources. The region also has extreme gradients in mercury (Hg) contamination due to a broad distribution of inorganic Hg sources. These diverse Hg sources and a varied landscape create a unique and complex mosaic of ecological risk from Hg impairment associated with differential methylmercury (MeHg) production and bioaccumulation. Understanding the landscape-scale variation in the magnitude and relative importance of processes associated with Hg transport, methylation, and MeHg bioaccumulation requires a multidisciplinary synthesis that transcends small-scale variability. The Western North America Mercury Synthesis compiled, analyzed, and interpreted spatial and temporal patterns and drivers of Hg and MeHg in air, soil, vegetation, sediments, fish, and wildlife across western North America. This collaboration evaluated the potential risk from Hg to fish, and wildlife health, human exposure, and examined resource management activities that influenced the risk of Hg contamination. This paper integrates the key information presented across the individual papers that comprise the synthesis. The compiled information indicates that Hg contamination is widespread, but heterogeneous, across western North America. The storage and transport of inorganic Hg across landscape gradients are largely regulated by climate and land-cover factors such as plant productivity and precipitation. Importantly, there was a striking lack of concordance between pools and sources of inorganic Hg, and MeHg in aquatic food webs. Additionally, water management had a widespread influence on MeHg bioaccumulation in aquatic ecosystems, whereas mining impacts where relatively localized. These results highlight the decoupling of inorganic Hg sources with MeHg production and bioaccumulation. Together the findings indicate that developing efforts to control MeHg production in the West may be particularly beneficial for reducing food web exposure instead of efforts to simply control inorganic Hg sources.

Science of the Total Environment↗
USGS2004

Surface-water-quality conditions and relation to taste-and-odor occurrences in the Lake Olathe Watershed, Northeast Kansas, 2000-02

Surface water in the Lake Olathe watershed, located in northeast Kansas, was sampled from June 2000 through December 2002 to characterize water-quality conditions in relation to physical properties, major ions, sediment, nutrients, selected trace elements, selected pesticides, fecal indicator bacteria, phytoplankton, and taste-and-odor compounds. In addition, two continuous real-time water-quality monitors were operated?one in Cedar Creek at Highway 56, the main tributary to Lake Olathe, and one in Lake Olathe, a supplemental domestic water supply and recreational resource for the city of Olathe. Median concentrations of dissolved and total forms of nitrogen and phosphorus in samples from Cedar Creek were larger than in samples from Lake Olathe, indicating that nutrients in the watershed were transported to Lake Olathe by Cedar Creek from June 2000 through December 2002. Increased concentrations of total phosphorus in samples from the hypolimnion of Lake Olathe compared to the epilimnion indicated that release of total phosphorus from bottom sediments occurred in the lake. Of the 50 pesticides analyzed in water samples from Cedar Creek and Lake Olathe, 10 pesticides were detected at concentrations greater than 0.01 microgram per liter in samples from Cedar Creek, and 9 pesticides were detected at concentrations greater than 0.01 microgram per liter in Lake Olathe, including four herbicides with concentrations exceeding 1.0 microgram per liter. Atrazine was detected at larger concentrations than any other pesticide in samples from both Cedar Creek and Lake Olathe during 2001 and 2002. Concentrations did not exceed the U.S. Environmental Protection Agency drinking-water annual average criterion of 3.0 micrograms per liter; however, concentrations in single samples were larger than 3.0 micrograms per liter. Regression analysis was used to assist in the estimation of sediment and chemical loads and yields. The estimated mean orthophosphate load for 2001 and 2002 represented 29 percent of the total phosphorus load to Lake Olathe. Estimated yields to Lake Olathe of both total nitrogen and total phosphorus, 13.0 and 1.1 pounds per acre per year, respectively, were consistent with mixed agricultural land use occurring in the watershed. Concentrations of fecal coliform bacteria samples from Lake Olathe were less than both primary and secondary single-sample criteria for recreational water in Kansas in place at the time of sampling. Sufficient samples were not collected to compare to the December 2003 Kansas Department of Health and Environment criteria, but single-sample Escherichia coli samples collected from Cedar Creek during storm runoff exceeded 2,000 colonies per 100 milliliters of water (former secondary recreation water-quality criterion for fecal coliform bacteria) in four of the seven samples collected. Water from Cedar Creek and Lake Olathe was analyzed in 2002 by enzyme-linked immunosorbent assay for microcystin-LR, a toxic algal compound. Concentrations of microcystin-LR in Lake Olathe during 2002 ranged from less than 0.1 to 0.41 microgram per liter, which is not considered a significant health risk according to guidelines published by the World Health Organization. Regression models were developed for four taste-and-odor phytoplankton species detected frequently in Lake Olathe? Melosira granulata, Anabaena, Oscillatoria, and Cryptomonas. The coefficient of determinations, R2, ranged from 0.64 to 0.89, and p-values ranged from less than 0.001 to 0.014, indicating a statistically significant relation with lake-residence time, specific conductance, turbidity, Secchi transparency depth, real-time continuous fluorescence, and total ammonia plus organic nitrogen as nitrogen. Actinomycetes, filamentous bacteria that are known producers of geosmin and 2-methylisoborneol (MIB), were sampled and analyzed in 2002 in water from Cedar Creek and Lake Olathe. In Lake Olathe, actinomycetes concentrations rang

Scientific Investigations Report↗
USGS2015

Critical metals in manganese nodules from the Cook Islands EEZ, abundances and distributions

The Cook Islands (CIs) Exclusive Economic Zone (EEZ) encompasses 1,977,000 km 2 and includes the Penrhyn and Samoa basins abyssal plains where manganese nodules flourish due to the availability of prolific nucleus material, slow sedimentation rates, and strong bottom currents. A group of CIs nodules was analyzed for mineralogical and chemical composition, which include many critical metals not before analyzed for CIs nodules. These nodules have varying sizes and nuclei material; however all are composed predominantly of δ-MnO 2 and X-ray amorphous iron oxyhydroxide. The mineralogy, Fe/Mn ratios, rare earth element contents, and slow growth rates (mean 1.9 mm/10 6 years) reflect formation primarily by hydrogenetic precipitation. The paucity of diagenetic input can be explained by low primary productivity at the surface and resultant low organic matter content in seafloor sediment, producing oxic seafloor and sub-seafloor environments. The nodules contain high mean contents of Co (0.41%), Ni (0.38%), Ti (1.20%), and total rare earth elements plus yttrium (REY; 0.167%), and also high contents of Mo, Nb, V, W, and Zr. Compiled data from a series of four cruises by the Japan International Cooperation Agency and the Mining agency of Japan from 1985 to 2000 were used to generate a map that defines the statistical distribution of nodule abundance throughout the EEZ, except the Manihiki Plateau. The abundance distribution map shows a belt of high nodule abundance (19–45 kg/m 2 ) that starts in the southeast corner of the EEZ, runs northwest, and also bifurcates into a SW trending branch. Small, isolated areas contain abundances of nodules of up to 58 kg/m 2 . Six ~ 20,000 km 2 areas of particularly high abundance were chosen to represent potential exploration areas, and maps for metal concentration were generated to visualize metal distribution and to extrapolate estimated metal tonnages within the six sites and the EEZ as a whole. Grades for Mn, Cu, and Ni are low in CIs nodules in areas of high abundance; however, Ti, Co, and REY show high contents where nodule abundances are high. Of the six areas identified to represent a range of metal contents, one at the northern end of the N-S abundance main belt optimizes the most metals and would yield the highest dry metric tons for Mn (61,002,292), Ni (1,247,834), Mo (186,166), V (356,247), W (30,215), and Zr (195,323). When compared with the Clarion–Clipperton Zone, the CIs nodules show higher nodule abundances (> 25 kg/m 2 over ~ 123,844 km 2 ), and are more enriched in the green-tech, high-tech, and energy metals Co, Ti, Te, Nb, REY, Pt, and Zr. The CIs EEZ shows a significant resource potential for these critical metals due to their high prices, high demand, and the high nodule abundance, which will allow for a smaller footprint for a 20-year mine site and therefore smaller environmental impact.

Ore Geology Reviews↗