USGS Science⌕ Search

SEARCH · USGS Science

Results for “Book”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99Linked to original sources

Measuring suspended sediment

Suspended sediment in streams and rivers can be measured using traditional instruments and techniques and (or) surrogate technologies. The former, as described herein, consists primarily of both manually deployed isokinetic samplers and their deployment protocols developed by the Federal Interagency Sedimentation Project. They are used on all continents other than Antarctica. The reliability of the typically spatially rich but temporally sparse data produced by traditional means is supported by a broad base of scientific literature since 1940. However, the suspended sediment surrogate technologies described herein – based on hydroacoustic, nephelometric, laser, and pressure difference principles – tend to produce temporally rich but in some cases spatially sparse datasets. The value of temporally rich data in the accuracy of continuous sediment-discharge records is hard to overstate, in part because such data can often overcome the shortcomings of poor spatial coverage. Coupled with calibration data produced by traditional means, surrogate technologies show considerable promise toward providing the fluvial sediment data needed to increase and bring more consistency to sediment-discharge measurements worldwide.

Book chapter↗

Spatially explicit modeling to evaluate regional stream water quality

Spatially referenced regressions on watershed attributes (SPARROW) models have been developed and applied over the past two decades to address the need for large-scale, spatially explicit information on stream water quality conditions. The strength of SPARROW models is that they describe the primary environmental processes that affect the supply and transport of contaminant mass in watersheds, based on the use of stream monitoring and geospatial data to statistically estimate model parameters. SPARROW models were first applied at the scale of the conterminous US, but their use has grown through applications in many smaller regions of the US and in other countries. Recent developments include a web-based decision support system that provides open access to model results without the assistance of technical experts or special software. As it is highlighted in this chapter, SPARROW modeling provides a flexible framework for studying many aspects of water quality to support both research and resource management objectives.

Book chapter↗

1.13 – Emerging contaminants

Since the Industrial Revolution, a diversity of large-scale chemical innovations has impacted aquatic systems in urban environments. Beginning in the 1990s, there has been a growing scientific interest and public awareness of the effects of the chemicals used in domestic, commercial, industrial, and agricultural applications, referred to in this article as ‘emerging contaminants’ (ECs), on ecosystem and human health. The growing global population and its increasing demands on water supplies in conjunction with climate-induced changes in hydrologic regimes place stress on freshwater resources, resulting in a greater reliance on reuse of reclaimed municipal wastewater treatment plant (WWTP) effluents to meet human and environmental needs. WWTP effluents are a major source of ECs, and it is important to have an understanding of the chemical composition of the reclaimed water, because many ECs are biologically active and the effects of chronic exposure to low concentration complex mixtures are unknown. Several classes of ECs that have been shown to be widespread in the aquatic environment are discussed in this chapter, including surfactants, complexing agents, fragrances, antimicrobials, industrial chemicals, pharmaceuticals, natural and synthetic estrogens, and disinfection byproducts. All of these compounds are biologically active via a variety of modes of action, and can occur in aquatic systems at concentrations ranging from <0.001 to >100 μg l −1 .

Book chapter↗

Chemical mixtures in potable water in the U.S.

In recent years, regulators have devoted increasing attention to health risks from exposure to multiple chemicals. In 1996, the US Congress directed the US Environmental Protection Agency (EPA) to study mixtures of chemicals in drinking water, with a particular focus on potential interactions affecting chemicals' joint toxicity. The task is complicated by the number of possible mixtures in drinking water and lack of toxicological data for combinations of chemicals. As one step toward risk assessment and regulation of mixtures, the EPA and the Agency for Toxic Substances and Disease Registry (ATSDR) have proposed to estimate mixtures' toxicity based on the interactions of individual component chemicals. This approach permits the use of existing toxicological data on individual chemicals, but still requires additional information on interactions between chemicals and environmental data on the public's exposure to combinations of chemicals. Large compilations of water-quality data have recently become available from federal and state agencies. This chapter demonstrates the use of these environmental data, in combination with the available toxicological data, to explore scenarios for mixture toxicity and develop priorities for future research and regulation. Occurrence data on binary and ternary mixtures of arsenic, cadmium, and manganese are used to parameterize the EPA and ATSDR models for each drinking water source in the dataset. The models' outputs are then mapped at county scale to illustrate the implications of the proposed models for risk assessment and rulemaking. For example, according to the EPA's interaction model, the levels of arsenic and cadmium found in US groundwater are unlikely to have synergistic cardiovascular effects in most areas of the country, but the same mixture's potential for synergistic neurological effects merits further study. Similar analysis could, in future, be used to explore the implications of alternative risk models for the toxicity and interaction of complex mixtures, and to identify the communities with the highest and lowest expected value for regulation of chemical mixtures.

Book chapter↗

Surface water quality in streams and rivers: Scaling, and climate change

This chapter explores spatial and temporal scaling and the impact of climate change on four basic water quality parameters: temperature, pH, dissolved oxygen, and suspended sediment. An introduction describing the conditions and changes in these water quality parameters is presented. Temporal scaling of water quality parameters is discussed on diel (24 h), precipitation event, and seasonal time scales. Discussion of longitudinal scaling of these parameters is included as well. Effects of climate change are presented here with a focus on observed trends, modeling results, and confounding factors in predicting climate change-induced shifts in water quality. This review highlights how factors such as geographic location, land cover, and human perturbations can alter water quality trends in rivers and streams.

Book chapter↗

Predictive double-layer modeling of metal sorption in mine-drainage systems

Previous comparison of predictive double-layer modeling and empirically derived metal-partitioning data has validated the use of the double-layer model to predict metal sorption reactions in iron-rich mine-drainage systems. The double-layer model subsequently has been used to model data collected from several mine-drainage sites in Colorado with diverse geochemistry and geology. This work demonstrates that metal partitioning between dissolved and sediment phases can be predictively modeled simply by knowing the water chemistry and the amount of suspended iron-rich particulates present in the system. Sorption on such iron-rich suspended sediments appears to control metal and arsenic partitioning between dissolved and sediment phases, with sorption on bed sediment playing a limited role. At pH > 5, Pb and As are largely sorbed by iron-rich suspended sediments and Cu is partially sorbed; Zn, Cd, and Ni usually remain dissolved throughout the pH range of 3 to 8.

Book chapter↗

Blending local scale information for developing agricultural resilience in Ethiopia

This brief article looks at the intersection of climate, land cover/land use, and population trends in the world's most food insecure country, Ethiopia. As a result of warming in the Indian and Western Pacific oceans, Ethiopia has experienced substantial drying over the past 20 years. We intersect the spatial pattern of this drying with high resolution climatologies, maps of agricultural expansion, population data, and socioeconomic livelihoods information to suggest that the coincidence of drying and agricultural expansion in south-central Ethiopia is likely adversely affecting a densely populated region with high levels of poverty and low wage levels.

Book chapter↗

Desertification of rangelands: 4.20

Desertification, the broad-scale conversion of perennial grasslands to dominance by annuals or xerophytic shrubs, has affected drylands globally over the past several centuries. Desertification is a cumulative threat that includes both climatic (e.g., drought) and land-use drivers (e.g., livestock overgrazing, fire). In this chapter, we determine the vulnerability of different ecosystem services to changes in drivers and ecosystem states, with a focus on the American Southwest. We have four objectives: (1) to describe key services in drylands, (2) to identify consequences of desertification to each service, (3) to explore the vulnerability of each service to future state-changes if existing threats intensify and new threats emerge, and (4) to determine threats expected to have the greatest future impact, and to provide potential actions for mitigation. We conclude with recommendations.

Book chapter↗

Large submarine sand waves and gravel lag substrates on Georges Bank off Atlantic Canada

Georges Bank is a large, shallow, continental shelf feature offshore of New England and Atlantic Canada. The bank is mantled with a veneer of glacial debris transported during the late Pleistocene from continental areas lying to the north. These sediments were reworked by marine processes during postglacial sea-level transgression and continue to be modified by the modern oceanic regime. The surficial geology of the Canadian portion of the bank is a widespread gravel lag overlain in places by well sorted sand occurring as bedforms. The most widespread bedforms are large, mobile, asymmetrical sand waves up to 19 m in height formed through sediment transport by strong tidal-driven and possibly storm-driven currents. Well-defined curvilinear bedform crests up to 15 km long form a complex bifurcating pattern having an overall southwest&ndash;northeast strike, which is normal to the direction of the major axis of the semidiurnal tidal current ellipse. Minor fields of immobile, symmetrical sand waves are situated in bathymetric lows. Rare mobile, asymmetrical barchan dunes are lying on the gravel lag in areas of low sand supply. On Georges Bank, the management of resources and habitats requires an understanding of the distribution of substrate types, their surface dynamics and susceptibility to movement, and their associated fauna.

Georges Bank↗

Seafloor morphology and coral habitat variability in a volcanic environment: Kaloko-Honokohau National Park, Hawaii, USA

Kaloko–Honokohau National Historical Park (KAHO) is one of three National Park lands along the leeward, west, or Kona, coast of the island of Hawaii, USA. The park includes 596 acres (2.4 km2) of submerged lands and marine resources within its official boundaries. The offshore region of KAHO, part of the insular shelf of the island of Hawaii, comprises a volcanic embayment that extends nearly 3.5 km alongshore and varies in width between 120 and 875 m from the shoreline to the 40 m isobath, the limit of the high-resolution bathymetry. Multiple Holocene volcanic flows coalesce within Kaloko-Honokohau National Historical Park (KAHO) on the island of Hawaii to create a complex offshore morphology. The volcanic-dominated morphology includes flat to gently sloping volcanic benches, boulder fields, cliffs and ledges, pinnacles, ridges, arches, and steep shelf escarpments. Each of these environments provide distinct habitat zones for coral species, ranging from isolated heads of Porites lobata and Pocillopora meandrina to dense thickets of Porites compressa . In contrast to coral habitat elsewhere in the Hawaiian Islands, where coral typically populates relict carbonate platforms, coral cover in KAHO is typically only a thin veneer of live coral and rubble on exposed volcanic pavement. In only a few locations does coral or accreted carbonate reef obscure the underlying volcanic surface.

Book chapter↗

Lahars and their deposits

Lahars occur during volcanic eruptions--or, less predictably, through other processes on steep volcanic terrain--when large masses of water mixed with sediment sweep down and off volcano slopes and commonly incorporate additional sediment and water. Because lahars are water-saturated, both liquid and solid interactions influence their behavior and distinguish them from other related phenomena common to volcanoes, such as debris avalanches and floods. The rock fragments carried by lahars make them especially destructive; the abundant liquid contained in them allows them to flow over gentle gradients and inundate areas far away from their sources. People in such distal areas commonly neither expect the danger nor anticipate the destructive power of lahars.

Book chapter↗

Volcano warning systems: Chapter 67

Messages conveying volcano alert level such as Watches and Warnings are designed to provide people with risk information before, during, and after eruptions. Information is communicated to people from volcano observatories and emergency management agencies and from informal sources and social and environmental cues. Any individual or agency can be both a message sender and a recipient and multiple messages received from multiple sources is the norm in a volcanic crisis. Significant challenges to developing effective warning systems for volcanic hazards stem from the great diversity in unrest, eruption, and post-eruption processes and the rapidly advancing digital technologies that people use to seek real-time risk information. Challenges also involve the need to invest resources before unrest to help people develop shared mental models of important risk factors. Two populations of people are the target of volcano notifications–ground- and aviation-based populations, and volcano warning systems must address both distinctly different populations.

Book chapter↗

GRACEnet: addressing policy needs through coordinated cross-location research

GRACEnet (Greenhouse gas Reduction through Agricultural Carbon Enhancement network) was conceived to build upon ongoing USDA Agricultural Research Service (ARS) research to improve soil productivity, while addressing the challenges and opportunities of interest in C sequestration from a climate change perspective. The vision for GRACEnet was and remains: Knowledge and information used to implement scientifically based agricultural management practices from the field to national policy scales on C sequestration, greenhouse gas (GHG) emissions, and environmental benefits. The national focus of GRACEnet uses a standardized approach by ARS laboratories and university and land manager (e.g. farmer and rancher) cooperators to assess C sequestration and GHG emission from different crop and grassland systems. Since 2002, GRACEnet has significantly expanded GHG mitigation science and delivered usable information to agricultural research and policy organizations. Recent developments suggest GRACEnet will have international impact by contributing leadership and technical guidance for the Global Research Alliance on Agricultural Greenhouse Gases.

Book chapter↗

The General Ensemble Biogeochemical Modeling System (GEMS) and its applications to agricultural systems in the United States: Chapter 18

The General Ensemble Biogeochemical Modeling System (GEMS) was es in individual models, it uses multiple site-scale biogeochemical models to perform model simulations. Second, it adopts Monte Carlo ensemble simulations of each simulation unit (one site/pixel or group of sites/pixels with similar biophysical conditions) to incorporate uncertainties and variability (as measured by variances and covariance) of input variables into model simulations. In this chapter, we illustrate the applications of GEMS at the site and regional scales with an emphasis on incorporating agricultural practices. Challenges in modeling soil carbon dynamics and greenhouse emissions are also discussed.

Book chapter↗

Advances in spectroscopic methods for quantifying soil carbon

The current gold standard for soil carbon (C) determination is elemental C analysis using dry combustion. However, this method requires expensive consumables, is limited by the number of samples that can be processed (~100/d), and is restricted to the determination of total carbon. With increased interest in soil C sequestration, faster methods of analysis are needed, and there is growing interest in methods based on diffuse reflectance spectroscopy in the visible, near-infrared or mid-infrared spectral ranges. These spectral methods can decrease analytical requirements and speed sample processing, be applied to large landscape areas using remote sensing imagery, and be used to predict multiple analytes simultaneously. However, the methods require localized calibrations to establish the relationship between spectral data and reference analytical data, and also have additional, specific problems. For example, remote sensing is capable of scanning entire watersheds for soil carbon content but is limited to the surface layer of tilled soils and may require difficult and extensive field sampling to obtain proper localized calibration reference values. The objective of this chapter is to discuss the present state of spectroscopic methods for determination of soil carbon.

Book chapter↗

Drought monitoring and assessment: Remote sensing and modeling approaches for the Famine Early Warning Systems Network

Drought monitoring is an essential component of drought risk management. It is usually carried out using drought indices/indicators that are continuous functions of rainfall and other hydrometeorological variables. This chapter presents a few examples of how remote sensing and hydrologic modeling techniques are being used to generate a suite of drought monitoring indicators at dekadal (10-day), monthly, seasonal, and annual time scales for several selected regions around the world. Satellite-based rainfall estimates are being used to produce drought indicators such as standardized precipitation index, dryness indicators, and start of season analysis. The Normalized Difference Vegetation Index is being used to monitor vegetation condition. Several satellite data products are combined using agrohydrologic models to produce multiple short- and long-term indicators of droughts. All the data sets are being produced and updated in near-real time to provide information about the onset, progression, extent, and intensity of drought conditions. The data and products produced are available for download from the Famine Early Warning Systems Network (FEWS NET) data portal at http://earlywarning.usgs.gov . The availability of timely information and products support the decision-making processes in drought-related hazard assessment, monitoring, and management with the FEWS NET. The drought-hazard monitoring approach perfected by the U.S. Geological Survey for FEWS NET through the integration of satellite data and hydrologic modeling can form the basis for similar decision support systems. Such systems can operationally produce reliable and useful regional information that is relevant for local, district-level decision making.

Book chapter↗

Volcanic ash hazards and aviation risk: Chapter 4

The risks to safe and efficient air travel from volcanic-ash hazards are well documented and widely recognized. Under the aegis of the International Civil Aviation Organization, globally coordinated mitigation procedures are in place to report explosive eruptions, detect airborne ash clouds and forecast their expected movement, and issue specialized messages to warn aircraft away from hazardous airspace. This mitigation framework is based on the integration of scientific and technical capabilities worldwide in volcanology, meteorology, and atmospheric physics and chemistry. The 2010 eruption of Eyjafjallajökull volcano in Iceland, which led to a nearly week-long shutdown of air travel into and out of Europe, has prompted the aviation industry, regulators, and scientists to work more closely together to improve how hazardous airspace is defined and communicated. Volcanic ash will continue to threaten aviation and scientific research will continue to influence the risk-mitigation framework.

Book chapter↗

Lahars at Cotopaxi and Tungurahua Volcanoes, Ecuador: Highlights from stratigraphy and observational records and related downstream hazards

Lahars are volcanic debris flows that are dubbed primary when triggered by eruptive activity or secondary when triggered by other factors such as heavy rainfall after eruptive activity has waned. Variation in time and space of the proportion of sediment to water within a lahar dictates lahar flow phase and the resultant sedimentary character of deposits. Characteristics of source material and of debris eroded and incorporated during flow downstream may strongly affect the grain-size composition of flowing lahars and their deposits. Lahars borne on the flanks of two steep-sided stratocones in Ecuador exemplify two important lahar types. Glacier-clad Cotopaxi volcano has been a producer of primary lahars that flow great distances downstream. Such primary lahars include those of both clast-rich and matrix-rich composition—some of which have flowed as far as 325 km to the Pacific Ocean. Cotopaxi's last important eruption in 1877 generated formidable syneruptive lahars comparable in size to those that buried Armero, Colombia, following the 1985 eruption of Nevado del Ruiz volcano. In contrast, ash-producing eruptive activity during the past 15 years at Tungurahua volcano has generated a continual supply of fresh volcaniclastic debris that is regularly remobilized by precipitation. Between 2000 and 2011, 886 rain-generated lahars were registered at Tungurahua. These two volcanoes pose dramatically different hazards to nearby populations. At Tungurahua, the frequency and small sizes of lahars have resulted in effective mitigation measures. At Cotopaxi 137 years have passed since the last important lahar-producing eruption, and there is now a high-risk situation for more than 100,000 people living in downstream valleys.

Cotopaxi volcano, Tungurahua volcano↗