USGS Science⌕ Search

SEARCH · USGS Science

Results for “Water Resource Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97Linked to original sources
USGS1974

Application of surface geophysics to ground-water investigations

This manual reviews the standard methods of surface geophysics applicable to ground-water investigations. It covers electrical methods, seismic and gravity methods, and magnetic methods. The general physical principles underlying each method and its capabilities and limitations are described. Possibilities for non-uniqueness of interpretation of geophysical results are noted. Examples of actual use of the methods are given to illustrate applications and interpretation in selected geohydrologic environments. The objective of the manual is to provide the hydrogeologist with a sufficient understanding of the capabilities, imitations, and relative cost of geophysical methods to make sound decisions as to when to use of these methods is desirable. The manual also provides enough information for the hydrogeologist to work with a geophysicist in designing geophysical surveys that differentiate significant hydrogeologic changes.

Techniques of Water-Resources Investigations↗
USGS1971

Application of borehole geophysics to water-resources investigations

This manual is intended to be a guide for hydrologists using borehole geophysics in ground-water studies. The emphasis is on the application and interpretation of geophysical well logs, and not on the operation of a logger. It describes in detail those logging techniques that have been utilized within the Water Resources Division of the U.S. Geological Survey, and those used in petroleum investigations that have potential application to hydrologic problems. Most of the logs described can be made by commercial logging service companies, and many can be made with small water-well loggers. The general principles of each technique and the rules of log interpretation are the same, regardless of differences in instrumentation. Geophysical well logs can be interpreted to determine the lithology, geometry, resistivity, formation factor, bulk density, porosity, permeability, moisture content, and specific yield of water-bearing rocks, and to define the source, movement, and chemical and physical characteristics of ground water. Numerous examples of logs are used to illustrate applications and interpretation in various ground-water environments. The interrelations between various types of logs are emphasized, and the following aspects are described for each of the important logging techniques: Principles and applications, instrumentation, calibration and standardization, radius of investigation, and extraneous effects.

Techniques of Water-Resources Investigations↗
USGS1990

Borehole geophysics applied to ground-water investigations

The purpose of this manual is to provide hydrologists, geologists, and others who have the necessary background in hydrogeology with the basic information needed to apply the most useful borehole-geophysical-logging techniques to the solution of problems in ground-water hydrology. Geophysical logs can provide information on the construction of wells and on the character of the rocks and fluids penetrated by those wells, as well as on changes in the character of these factors over time. The response of well logs is caused by petrophysical factors, by the quality, temperature, and pressure of interstitial fluids, and by ground-water flow. Qualitative and quantitative analysis of analog records and computer analysis of digitized logs are used to derive geohydrologic information. This information can then be extrapolated vertically within a well and laterally to other wells using logs. The physical principles by which the mechanical and electronic components of a logging system measure properties of rocks, fluids, and wells, as well as the principles of measurement, must be understood if geophysical logs are to be interpreted correctly. Plating a logging operation involves selecting the equipment and the logs most likely to provide the needed information. Information on well construction and geohydrology is needed to guide this selection. Quality control of logs is an important responsibility of both the equipment operator and the log analyst and requires both calibration and well-site standardization of equipment. Logging techniques that are widely used in ground-water hydrology or that have significant potential for application to this field include spontaneous potential, resistance, resistivity, gamma, gamma spectrometry, gamma-gamma, neutron, acoustic velocity, acoustic televiewer, caliper, and fluid temperature, conductivity, and flow. The following topics are discussed for each of these techniques: principles and instrumentation, calibration and standardization, volume of investigation, extraneous effects, and interpretation and applications.

Techniques of Water-Resources Investigations↗
USGS1969

Measurement of discharge by the moving-boat method

This chapter describes the procedures for measuring discharge in large streams by the moving-boat technique. During the traverse of a boat across a stream, a sonic sounder records the geometry of the cross section, and a continuously operating current meter senses the combined stream and boat velocities. These data are converted to discharge for the cross section quickly, efficiently, and inexpensively. Measurements obtained by the moving-boat technique compare within 5 percent of measurements obtained by conventional means. Field and office procedures applicable to this method are outlined. Theory of technique is developed and equipment required is described. Selection and preparation of the cross section is detailed. A complete facsimile example of computation of a moving-boat measurement is given, and the determination and application of adjustment factors are described.

Techniques of Water-Resources Investigations↗
USGS1986

Fluorometric procedures for dye tracing

This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The advantages of dye tracing are (1) low detection and measurement limits and (2) simplicity and accuracy in measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section on aerial photography is included because of its possible use to supplement ground-level fluorometry.

Techniques of Water-Resources Investigations↗
USGS1968

Fluorometric procedures for dye tracing

This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The advantages of dye tracing are (1) low detection and measurement limits and (2) simplicity and accuracy in measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section on aerial photography is included because of its possible use to supplement ground-level fluorometry.

Techniques of Water-Resources Investigations↗
USGS1983

Use of flumes in measuring discharge

Flumes for measuring discharge are usually of two general groups-critical-flow flumes and supercritical-flow flumes. In this chapter, the underlying design principles for each group are discussed; the most commonly used flumes are described and their discharge ratings presented. There is also discussion of considerations in choosing and fitting the appropriate flume for a given situation as well as flume construction techniques and operational experiences.

Techniques of Water-Resources Investigations↗
USGS1985

Measurement of discharge using tracers

The development of fluorescent dyes and fluorometers that can measure these dyes at very low concentrations has made dye-dilution methods practical for measuring discharge. These methods are particularly useful for determining discharge under certain flow conditions that are unfavorable for current meter measurements. These include small streams, canals, and pipes where 1. Turbulence is excessive for current-meter measurement but conducive to good mixing. 2. Moving rocks and debris may damage instruments placed in the flow. 3. Cross-sectional areas or velocities are indeterminate or changing. 4. The flow is unsteady, such as the flow that exists with storm-runoff events on small streams and urban storm-sewer systems. 5. The flow is physically inaccessible or unsafe. From a practical standpoint, such methods are limited primarily to small streams, because of the excessively long channel-mixing lengths required for larger streams. Very good accuracy can be obtained provided that 1. Adequate mixing length and time are allowed. 2. Careful field and laboratory techniques are used. 3. Dye losses are not significant. This manual describes the slug-injection and constant-rate injection methods of performing tracer-dilution measurements. Emphasis is on the use of fluorescent dyes as tracers and the equipment, field methods, and laboratory procedures for performing such measurements. The tracer-velocity method is also briefly discussed.

Techniques of Water-Resources Investigations↗
USGS1989

Determination of stream reaeration coefficients by use of tracers

Stream reaeration is the physical absorption of oxygen from the atmosphere by a flowing stream. This is the primary process by which a stream replenishes the oxygen consumed in the biodegradation of organic wastes. Prior to 1965, reaeration rate coefficients could be estimated only by indirect methods. In 1965, a direct method of measuring stream reaeration coefficients was developed whereby a radioactive tracer gas was injected into a stream-the principle being that the tracer gas would be desorbed from the stream inversely to how oxygen would be absorbed. The technique has since been modified by substituting hydrocarbon gases for the radioactive tracer gas. This manual describes the slug-injection and constant-rate-injection methods of measuring gas-tracer desorption. Emphasis is on the use of rhodamine WT dye as a relatively conservative tracer and propane as the nonconservative gas tracer, on planning field tests, on methods of injection, sampling, and analysis, and on techniques for computing desorption and reaeration coefficients.

Techniques of Water-Resources Investigations↗
USGS1990

Levels at streamflow gaging stations

This manual establishes the surveying procedures for (1) setting gages at a streamflow gaging station to datum and (2) checking the gages periodically for errors caused by vertical movement of the structures that support them. Surveying terms and concepts are explained, and procedures for testing, adjusting, and operating the instruments are described in detail. Notekeeping, adjusting level circuits, checking gages, summarizing results, locating the nearest National Geodetic Vertical Datum of 1929 bench mark, and relating the gage datum to the national datum are also described.

Techniques of Water-Resources Investigations↗
USGS1968

Measurement of peak discharge by the slope-area method

This chapter describes application of the Manning equation to measure peak discharge in open channels. Field and office procedures limited to this method are described. Selection of reaches and cross sections is detailed, discharge equations are given, and a complete facsimile example of computation of a slope-area measurement is also given.

Techniques of Water-Resources Investigations↗
USGS1993

Simulation of soluble waste transport and buildup in surface waters using tracers

Soluble tracers can be used to simulate the transport and dispersion of soluble wastes that might have been introduced or are planned for introduction into surface waters. Measured tracer-response curves produced from the injection of a known quantity of soluble tracer can be used in conjunction with the superposition principle to simulate potential waste buildup in streams, lakes, and estuaries. Such information is particularly valuable to environmental and water-resource planners in determining the effects of proposed waste discharges. The theory, techniques, analysis, and presentation of results of tracer-waste simulation tests in rivers, lakes, and estuaries are described. This manual builds on other manuals dealing with dye tracing by emphasizing the expanded use of data from time-of-travel studies.

Techniques of Water-Resources Investigations↗
USGS1995

Stream-gaging cableways

This manual provides a series of standard designs for stream-gaging cableways used by the U.S. Geological Survey (USGS). It provides helpful information on construction, inspection, and maintenance of cableways.

Techniques of Water-Resources Investigations↗
USGS1968

Measurement of peak discharge at culverts by indirect methods

This chapter classifies culvert flow into six types, gives discharge equations based on continuity and energy equations, and describes procedures for measuring peak discharges using culverts in the field. Discharge coefficients for a variety of geometries and flow types arc given. Ten examples detail step-by-step computation procedures.

Techniques of Water-Resources Investigations↗
USGS1967

Measurement of peak discharge at width contractions by indirect methods

This chapter describes procedures for measuring peak discharges using open-channel width contractions. Field and office procedures limited to this method are described. The discharge equation based on the continuity and energy equations between an approach cross section and the contracted section under a bridge or contraction is given. Contractions are classified into four geometric types. Discharge coefficients and computation procedures are given with a complete facsimile example of computation of a contracted-opening measurement. Additional procedures are given for multiple-opening contractions.

Techniques of Water-Resources Investigations↗
USGS1967

Measurement of peak discharge at dams by indirect methods

This chapter describes procedures for measuring peak discharges using dams, weirs, and embankments. Field and office procedures limited to this method are described. Discharge coefficients and formulas are given for three general classes of weirs-sharp-crested, broad-crested, and round-crested-and for highway embankments and weirs of unusual shape. The effects of submergence are defined for most forms.

Techniques of Water-Resources Investigations↗
USGS1968

General procedure for gaging streams

This chapter briefly describes the objectives and procedures used in obtaining streamflow records. It is considered an introduction to other chapters on surface-water techniques which treat individual procedures in greater detail.

Techniques of Water-Resources Investigations↗
USGS1989

Measurement of time of travel in streams by dye tracing

The use of fluorescent dyes and tracing techniques provides a means for measuring the time-of-travel and dispersion characteristics of steady and gradually varied flow in streams. Measurements of the dispersion and concentration of dyes give insight into the behavior of soluble contaminants that may be introduced into a stream. This manual describes methods of measuring time of travel of water and waterborne solutes by dye tracing. The fluorescent dyes, measuring equipment used, and the field and laboratory procedures are also described. Methods of analysis and presentation to illustrate time-oftravel and dispersion characteristics of streams are provided.

Techniques of Water-Resources Investigations↗