USGS Science⌕ Search

SEARCH · USGS Science

Results for “Research Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97Linked to original sources
USGS2006

Acoustic bed velocity and bed load dynamics in a large sand bed river

Development of a practical technology for rapid quantification of bed load transport in large rivers would represent a revolutionary advance for sediment monitoring and the investigation of fluvial dynamics. Measurement of bed load motion with acoustic Doppler current profiles (ADCPs) has emerged as a promising approach for evaluating bed load transport. However, a better understanding of how ADCP data relate to conditions near the stream bed is necessary to make the method practical for quantitative applications. In this paper, we discuss the response of ADCP bed velocity measurements, defined as the near-bed sediment velocity detected by the instrument's bottom-tracking feature, to changing sediment-transporting conditions in the lower Missouri River. Bed velocity represents a weighted average of backscatter from moving bed load particles and spectral reflections from the immobile bed. The ratio of bed velocity to mean bed load particle velocity depends on the concentration of the particles moving in the bed load layer, the bed load layer thickness, and the backscatter strength from a unit area of moving particles relative to the echo strength from a unit area of unobstructed bed. A model based on existing bed load transport theory predicted measured bed velocities from hydraulic and grain size measurements with reasonable success. Bed velocities become more variable and increase more rapidly with shear stress when the transport stage, defined as the ratio of skin friction to the critical shear stress for particle entrainment, exceeds a threshold of about 17. This transition in bed velocity response appears to be associated with the appearance of longer, flatter bed forms at high transport stages.

Journal of Geophysical Research F: Earth Surface↗
USGS2011

Collection of mammal manure and other Debris by nesting Burrowing Owls

Burrowing Owls ( Athene cunicularia ) routinely collect and scatter dry manure of mammals around their nesting burrows. Recent studies have suggested this behavior attracts insect prey to the nesting burrow. However, some Burrowing Owls do not use manure, but instead, collect and scatter other materials (e.g., grass, moss, paper, plastic) around their nesting burrow in a similar fashion. Use of these materials seemingly contradicts the prey-attraction hypothesis. Using observational and experimental methods, we tested whether Burrowing Owls preferred manure to other materials commonly found at nesting burrows in eastern Washington. We found a wide variety of materials at nests, but grass and manure were the most common materials. The amount of manure present at nests was negatively correlated with the amount of other materials, and with the distance to the nearest source of manure. Burrowing Owls showed no preference between horse manure and grass divots at experimental supply stations that we placed near nesting burrows. They did prefer these two materials to carpet pieces and aluminum foil (both materials that are often found at Burrowing Owl nests). Our results did not support the premise that Burrowing Owls specifically seek out manure when lining their nesting burrows. The unusual behavior of collecting and scattering mammal manure and other debris at Burrowing Owl nests may serve functions other than (or in addition to) prey attraction and alternative hypotheses need further testing before the function of this behavior is certain.

Journal of Raptor Research↗
USGS2015

Composite Sunrise Butte pluton: Insights into Jurassic–Cretaceous collisional tectonics and magmatism in the Blue Mountains Province, northeastern Oregon

The composite Sunrise Butte pluton , in the central part of the Blue Mountains Province, northeastern Oregon, preserves a record of subduction-related magmatism, arc-arc collision, crustal thickening, and deep-crustal anatexis. The earliest phase of the pluton (Desolation Creek unit) was generated in a subduction zone environment, as the oceanic lithosphere between the Wallowa and Olds Ferry island arcs was consumed. Zircons from this unit yielded a 206 Pb/ 238 U age of 160.2 ± 2.1 Ma. A magmatic lull ensued during arc-arc collision, after which partial melting at the base of the thickened Wallowa arc crust produced siliceous magma that was emplaced into metasedimentary rocks and serpentinite of the overthrust forearc complex. This magma crystallized to form the bulk of the Sunrise Butte composite pluton (the Sunrise Butte unit; 145.8 ± 2.2 Ma). The heat necessary for crustal anatexis was supplied by coeval mantle-derived magma (the Onion Gulch unit; 147.9 ± 1.8 Ma). The lull in magmatic activity between 160 and 148 Ma encompasses the timing of arc-arc collision (159-154 Ma), and it is similar to those lulls observed in adjacent areas of the Blue Mountains Province related to the same shortening event. Previous researchers have proposed a tectonic link between the Blue Mountains Province and the Klamath Mountains and northern Sierra Nevada Provinces farther to the south; however, timing of Late Jurassic deformation in the Blue Mountains Province predates the timing of the so-called Nevadan orogeny in the Klamath Mountains. In both the Blue Mountains Province and Klamath Mountains, the onset of deep-crustal partial melting initiated at ca. 148 Ma, suggesting a possible geodynamic link. One possibility is that the Late Jurassic shortening event recorded in the Blue Mountains Province may be a northerly extension of the Nevadan orogeny. Differences in the timing of these events in the Blue Mountains Province and the Klamath-Sierra Nevada Provinces suggest that shortening and deformation were diachronous, progressing from north to south. We envision that Late Jurassic deformation may have collapsed a Gulf of California-style oceanic extensional basin that extended from the Klamath Mountains (e.g., Josephine ophiolite) to the central Blue Mountains Province, and possibly as far north as the North Cascades (i.e., the coeval Ingalls ophiolite). The lull in magmatic activity between 160 and 148 Ma encompasses the timing of arc-arc collision (159–154 Ma), and it is similar to those lulls observed in adjacent areas of the Blue Mountains Province related to the same shortening event. Previous researchers have proposed a tectonic link between the Blue Mountains Province and the Klamath Mountains and northern Sierra Nevada Provinces farther to the south; however, timing of Late Jurassic deformation in the Blue Mountains Province predates the timing of the so-called Nevadan orogeny in the Klamath Mountains. In both the Blue Mountains Province and Klamath Mountains, the onset of deep-crustal partial melting initiated at ca. 148 Ma, suggesting a possible geodynamic link. One possibility is that the Late Jurassic shortening event recorded in the Blue Mountains Province may be a northerly extension of the Nevadan orogeny. Differences in the timing of these events in the Blue Mountains Province and the Klamath–Sierra Nevada Provinces suggest that shortening and deformation were diachronous, progressing from north to south. We envision that Late Jurassic deformation may have collapsed a Gulf of California–style oceanic extensional basin that extended from the Klamath Mountains (e.g., Josephine ophiolite) to the central Blue Mountains Province, and possibly as far north as the North Cascades (i.e., the coeval Ingalls ophiolite).

Idaho, Oregon↗
USGS2014

Quantifying the predictive consequences of model error with linear subspace analysis

All computer models are simplified and imperfect simulators of complex natural systems. The discrepancy arising from simplification induces bias in model predictions, which may be amplified by the process of model calibration. This paper presents a new method to identify and quantify the predictive consequences of calibrating a simplified computer model. The method is based on linear theory, and it scales efficiently to the large numbers of parameters and observations characteristic of groundwater and petroleum reservoir models. The method is applied to a range of predictions made with a synthetic integrated surface-water/groundwater model with thousands of parameters. Several different observation processing strategies and parameterization/regularization approaches are examined in detail, including use of the Karhunen-Loève parameter transformation. Predictive bias arising from model error is shown to be prediction specific and often invisible to the modeler. The amount of calibration-induced bias is influenced by several factors, including how expert knowledge is applied in the design of parameterization schemes, the number of parameters adjusted during calibration, how observations and model-generated counterparts are processed, and the level of fit with observations achieved through calibration. Failure to properly implement any of these factors in a prediction-specific manner may increase the potential for predictive bias in ways that are not visible to the calibration and uncertainty analysis process.

Water Resources Research↗
USGS2012

Chemical bonding in the outer core: high-pressure electronic structures of oxygen and sulfur in metallic iron

From its density the outer core is believed to be an alloy of iron and a light element such as sulfur or oxygen. The nature of the light element in the core is an important constraint for theories of the Earth's formation. In this paper the electronic structures of oxygen and sulfur impurities in metallic iron are investigated to determine if pressure, temperature, and composition-induced changes in bonding might affect phase equilibria along the Fe-FeS and Fe-FeO binaries. The electronic structure of sulfur in metallic iron is consistent with the miscibility between Fe and FeS liquids. Volume compression strengthens the Fe-S bond, and it is expected that at sufficiently high pressure, sulfur can substitute for Fe and give solid solution behavior between Fe and FeS. In contrast, the electronic structure of oxygen in metallic iron shows that oxygen cannot act as a substitutional impurity (replacing Fe). This explains the observed miscibility gap on the Fe-FeO binary at 1 atm pressure. Volume compression does not greatly change the electronic structure if oxygen substitutes for iron in bcc and fcc iron. Iron-oxygen bonding does occur, however, if oxygen occupies interstitial sites. Insofar as the molar volume of FeO incorporated as interstitial oxygen in metallic iron is smaller than that of pure FeO, the incorporation of oxygen into metallic iron may be favored under the pressures of the Earth's core.

Journal of Geophysical Research↗
USGS1997

Use of a spatial decision support system for analysis of habitat use by wintering northern pintails

A multi-functional spatial decision support system (SDSS) was,developed at the spatial analysis branch Of the National Wetlands Research Center, and the wildlife analysis module of the system was used to study habitat use by wintering pintail. We instrumented female pintails at Catahoula Lake, Louisiana, in October of 1992-94 and located the instrumented birds weekly through the following March. Using the SDSS developed in an ARC/INFO geographical information system (GIS) - environment. We were able to visualize movements of instrumented pintails over varied environmental conditions and landscape features to determine habitat use. Weather data were used to determine factors important in the timing of movements. The analyses indicated that female pintails dispersed from Catahoula Lake, Louisiana, in three general patterns, based upon wetland conditions. Timing of movements coincided with periods of precipitation or disturbance, primarily hunting. Pintails which arrived at Catahoula Lake in October and November remained in the agricultural areas of Louisiana and Arkansas, with very limited movements to the coastal marshes or westward into the agricultural areas of Texas. Northward movements into Arkansas occurred whenever there was substantial rainfall in the agricultural regions, and northward movements generally stopped at the frost-line. No differences in adult or juvenile female movement patterns were apparent.

Louisiana↗
USGS2003

Inferences on the hydrothermal system beneath the resurgent dome in Long Valley Caldera, east-central California, USA, from recent pumping tests and geochemical sampling

Quaternary volcanic unrest has provided heat for episodic hydrothermal circulation in the Long Valley caldera, including the present-day hydrothermal system, which has been active over the past 40 kyr. The most recent period of crustal unrest in this region of east-central California began around 1980 and has included periods of intense seismicity and ground deformation. Uplift totaling more than 0.7 m has been centered on the caldera's resurgent dome, and is best modeled by a near-vertical ellipsoidal source centered at depths of 6-7 km. Modeling of both deformation and microgravity data now suggests that (1) there are two inflation sources beneath the caldera, a shallower source 7-10 km beneath the resurgent dome and a deeper source ???15 km beneath the caldera's south moat and (2) the shallower source may contain components of magmatic brine and gas. The Long Valley Exploration Well (LVEW), completed in 1998 on the resurgent dome, penetrates to a depth of 3 km directly above this shallower source, but bottoms in a zone of 100??C fluid with zero vertical thermal gradient. Although these results preclude extrapolations of temperatures at depths below 3 km, other information obtained from flow tests and fluid sampling at this well indicates the presence of magmatic volatiles and fault-related permeability within the metamorphic basement rocks underlying the volcanic fill. In this paper, we present recently acquired data from LVEW and compare them with information from other drill holes and thermal springs in Long Valley to delineate the likely flow paths and fluid system properties under the resurgent dome. Additional information from mineralogical assemblages in core obtained from fracture zones in LVEW documents a previous period of more vigorous and energetic fluid circulation beneath the resurgent dome. Although this system apparently died off as a result of mineral deposition and cooling (and/or deepening) of magmatic heat sources, flow testing and tidal analyses of LVEW water level data show that relatively high permeability and strain sensitivity still exist in the steeply dipping principal fracture zone penetrated at a depth of 2.6 km. The hydraulic properties of this zone would allow a pressure change induced at distances of several kilometers below the well to be observable within a matter of days. This indicates that continuous fluid pressure monitoring in the well could provide direct evidence of future intrusions of magma or high-temperature fluids at depths of 5-7 km. ?? 2003 Elsevier B.V. All rights reserved.

California↗
USGS1996

Assessing contamination in Great Lakes sediments using benthic invertebrate communities and the sediment quality triad approach

Sediments in many Great Lakes harbors and tributary rivers are contaminated. As part of the USEPA's Assessment and Remediation of Contaminated Sediment (ARCS) program, a number of studies were conducted to determine the nature and extent of sediment contamination in Great Lakes Areas of Concern (AOC). This paper describes the composition of benthic invertebrate communities in contaminated sediments and is one in a series of papers describing studies conducted to evaluate sediment toxicity from three AOC's (Buffalo River, NY; Indiana Harbor, IN; Saginaw River, MI), as part of the ARCS Program. Oligochaeta (worms) and Chironomidae (midge) comprised over 90% of the benthic invertebrate numbers in samples collected from depositional areas. Worms and midge consisted of taxa identified as primarily contaminant tolerant organisms. Structural deformities of mouthparts in midge larvae were pronounced in many of the samples. Good concurrence was evident between measures of laboratory toxicity, sediment contaminant concentration, and benthic invertebrate community composition in extremely contaminated samples. However, in moderately contaminated samples, less concordance was observed between the benthos community composition and either laboratory toxicity test results or sediment contaminant concentration. Laboratory sediment toxicity tests may better identify chemical contamination in sediments than many commonly used measures of benthic invertebrate community composition. Benthic measures may also reflect other factors such as habitat alteration. Evaluation of non-contaminant factors are needed to better interpret the response of benthic invertebrates to sediment contamination.

Journal of Great Lakes Research↗
USGS2024

U.S. Geological Survey Karst Interest Group proceedings, Nashville, Tennessee, October 22-24, 2024

Karst hydrogeologic systems represent challenging and unique conditions to scientists studying groundwater flow and contaminant transport. Karst terrains are characterized by distinct and beautiful landscapes, caverns, and springs, and many of the exceptional karst areas are designated as national or state parks. The range and complexity of landforms and groundwater flow systems associated with karst terrains are enormous, perhaps more than any other aquifer type. The U.S. Geological Survey (USGS) Karst Interest Group (KIG), formed in 2000, is a loosely knit, grassroots organization of USGS and non-USGS scientists and researchers devoted to fostering better communication among scientists working on, or interested in, karst aquifers. The primary mission of the KIG is to encourage and support interdisciplinary collaboration and technology transfer among scientists working in karst areas. To accomplish its mission, the KIG has organized a series of workshops. To date (2024), nine KIG workshops, including the workshop documented in this report, have been held. The abstracts and extended abstracts provide a snapshot in time of past and current karst related studies. The USGS Water Availability and Use Science Program funded the workshop and proceedings. The planning committee for the ninth workshop includes Thomas D. Byl (USGS and Tennessee State University), Allan K. Clark (USGS), Laura M. DeMott (USGS), Eve L. Kuniansky (USGS, Emeritus), Benjamin V. Miller (USGS), and Lawrence E. Spangler (USGS, Emeritus). The workshop proceedings are edited by Eve L. Kuniansky and Lawrence E. Spangler. The field trip guide was produced by Benjamin V. Miller and Brian Ham (Tennessee Department of Environment and Conservation) and included in the proceedings from the KIG’s 2021 virtual workshop to be used on the optional field trip held on Thursday, October 24, 2024.

Open-File Report↗
USGS2013

Lithofacies, age, depositional setting, and geochemistry of the Otuk Formation in the Red Dog District, northwestern Alaska

Complete penetration of the Otuk Formation in a continuous drill core (diamond-drill hole, DDH 927) from the Red Dog District illuminates the facies, age, depositional environment, source rock potential, and isotope stratigraphy of this unit in northwestern Alaska. The section, in the Wolverine Creek plate of the Endicott Mountains Allochthon (EMA), is ~82 meters (m) thick and appears structurally uncomplicated. Bedding dips are generally low and thicknesses recorded are close to true thicknesses. Preliminary synthesis of sedimentologic, paleontologic, and isotopic data suggests that the Otuk succession in DDH 927 is a largely complete, albeit condensed, marine Triassic section in conformable contact with marine Permian and Jurassic strata. The Otuk Formation in DDH 927 gradationally overlies gray siliceous mudstone of the Siksikpuk Formation (Permian, based on regional correlations) and underlies black organic-rich mudstone of the Kingak(?) Shale (Jurassic?, based on regional correlations). The informal shale, chert, and limestone members of the Otuk are recognized in DDH 927, but the Jurassic Blankenship Member is absent. The lower (shale) member consists of 28 m of black to light gray, silty shale with as much as 6.9 weight percent total organic carbon (TOC). Thin limy layers near the base of this member contain bivalve fragments (Claraia sp.?) consistent with an Early Triassic (Griesbachian-early Smithian) age. Gray radiolarian chert dominates the middle member (25 m thick) and yields radiolarians of Middle Triassic (Anisian and Ladinian) and Late Triassic (Carnian-late middle Norian) ages. Black to light gray silty shale, like that in the lower member, forms interbeds that range from a few millimeters to 7 centimeters in thickness through much of the middle member. A distinctive, 2.4-m-thick interval of black shale and calcareous radiolarite ~17 m above the base of the member has as much as 9.8 weight percent TOC, and a 1.9-m-thick interval of limy to cherty mudstone immediately above this contains radiolarians, foraminifers, conodonts, and halobiid bivalve fragments. The upper (limestone) member (29 m thick) is lime mudstone with monotid bivalves and late Norian radiolarians, overlain by gray chert that contains Rhaetian (latest Triassic) radiolarians; Rhaetian strata have not previously been documented in the Otuk. Rare gray to black shale interbeds in the upper member have as much as 3.4 weight percent TOC. At least 35 m of black mudstone overlies the limestone member; these strata lack interbeds of oil shale and chert that are characteristic of the Blankenship, and instead they resemble the Kingak Shale. Vitrinite reflectance values (2.45 and 2.47 percent Ro) from two samples of black shale in the chert member indicate that these rocks reached a high level of thermal maturity within the dry gas window. Regional correlations indicate that lithofacies in the Otuk Formation vary with both structural and geographic position. For example, the shale member of the Otuk in the Wolverine Creek plate includes more limy layers and less barite (as blades, nodules, and lenses) than equivalent strata in the structurally higher Red Dog plate of the EMA, but it has fewer limy layers than the shale member in the EMA ~450 kilometers (km) to the east at Tiglukpuk Creek. The limestone member of the Otuk is thicker in the Wolverine Creek plate than in the Red Dog plate and differs from this member in EMA sections to the east in containing an upper cherty interval that lacks monotids; a similar interval is seen at the top of the Otuk Formation ~125 km to the west (Lisburne Peninsula). Our observations are consistent with the interpretations of previous researchers that Otuk facies become more distal in higher structural positions and that within a given structural level more distal facies occur to the west. Recent paleogeographic reconstructions indicate that the Otuk accumulated at a relatively high paleolatitude with a bivalve fauna typical of the Boreal realm. A suite of δ 13 C org (carbon isotopic composition of carbon) data (n=38) from the upper Siksikpuk Formation through the Otuk Formation and into the Kingak(?) Shale in DDH 927 shows a pattern of positive and negative excursions similar to those reported elsewhere in Triassic strata. In particular, a distinct negative excursion at the base of the Otuk (from ‒23.8 to ‒31.3‰ (permil, or parts per thousand)) likely correlates with a pronounced excursion that marks the Permian-Triassic boundary at many localities worldwide. Another feature of the Otuk δ 13 C org record that may correlate globally is a series of negative and positive excursions in the lower member. At the top of the Otuk in DDH 927, the δ 13 C org values are extremely low and may correlate with a negative excursion that is widely observed at the Triassic-Jurassic boundary.

Alaska↗
USGS2005

Animating the biodynamics of soil thickness using process vector analysis: A dynamic denudation approach to soil formation

This paper expands the dynamic denudation framework of landscape evolution by providing new process insights and details on how soil and its signature morphological feature, the biomantle, form and function in the environment. We examine soils and their biomantles from disparate parts of the world, from the tropics through midlatitudes and hyperarid through perhumid, a range that exhibits varying environments for, and of, life. We then explicate the process pathways that cause soils to thicken and thin, and to even disappear, then reform. We do this by examining thickness relationships, where soil thickness stand biomantle thickness bt are functions of upbuilding u and deepening d minus removal r processes, hence st/bt=f(u+d-r). Upbuilding has two subsets, u1, which includes all exogenous (allochthonous-outside) mineral and/or organic inputs to the soil system, and u2, which includes all endogenous (autochthonous-in situ) processes and productions, including weathering. Exogenous u1 inputs include eolian and slopewash inputs (sedimentations) of mineral and organic materials, mass wasting accumulations and the like. Endogenous u2 processes and productions include the sum of in situ bioturbations, biosynthetic productions, organic accumulations, biovoid productions, weathering and volume increases caused by their sum. Endogenous upbuildings, which dominantly occur in the biomantle, are basically biodynamic bd processes and productions, hence u2=bd. Therefore, if exogenous upbuildings u1 are minimal or zero, then biomantle thickness bt is expressed by bt=f(u2-r) or bt=f(bd-r). Drawing on these relationships, we employ a graphic-conceptual device called process vector analysis in a digital animation (see supplementary materials or cf. https://netfiles.uiuc.edu/jdomier/www/temp/ biomantle.html) that illustrates the main pathways that form both Earth's soil and its unique epidermis, the biomantle. We then discuss the main elements of the animation using still frames that represent thickness turning points. We end by encouraging researchers, instructors and students to view Earth's landforms and soils as integrated dynamic entities that are constantly coevolving elements of a global subaerial-subaqueous continuum. ?? 2004 Elsevier B.V. All rights reserved.

Geomorphology↗
USGS2010

Use of output from high‐resolution atmospheric models in landscape‐scale hydrologic models: An assessment

In this paper we investigate the feasibility of coupling regional climate models (RCMs) with landscape‐scale hydrologic models (LSHMs) for studies of the effects of climate on hydrologic systems. The RCM used is the National Center for Atmospheric Research/Pennsylvania State University mesoscale model (MM4). Output from two year‐round simulations (1983 and 1988) over the western United States is used to drive a lake model for Pyramid Lake in Nevada and a streamfiow model for Steamboat Creek in Oregon. Comparisons with observed data indicate that MM4 is able to produce meteorologic data sets that can be used to drive hydrologic models. Results from the lake model simulations indicate that the use of MM4 output produces reasonably good predictions of surface temperature and evaporation. Results from the streamflow simulations indicate that the use of MM4 output results in good simulations of the seasonal cycle of streamflow, but deficiencies in simulated wintertime precipitation resulted in underestimates of streamflow and soil moisture. Further work with climate (multiyear) simulations is necessary to achieve a complete analysis, but the results from this study indicate that coupling of LSHMs and RCMs may be a useful approach for evaluating the effects of climate change on hydrologic systems.

Water Resources Research↗
USGS2019

Simulating runoff quality with the highway-runoff database and the Stochastic Empirical Loading and Dilution Model

Stormwater practitioners need quantitative information about the quality and volume of highway runoff to assess and mitigate potential adverse effects of runoff on the Nation’s receiving waters. The U.S. Geological Survey developed the Highway Runoff Database (HRDB) in cooperation with the FHWA to provide practice-ready information to meet these information needs on the local or national scale. This paper describes the datasets that are available in version 1.1 of the HRDB and demonstrates how data and statistics from the HRDB can be used with the Stochastic Empirical Loading and Dilution Model (SELDM) to simulate highway runoff. The HRDB includes 249 sites, 6,849 runoff events, and 106,869 event mean concentrations (EMCs) collected during the 1975–2017 period. It includes data from 16 States in the conterminous United States and from Hawaii. The EMCs in the HRDB include measurements for 415 different water-quality constituents. These water-quality measurements include 32,944 trace-metal; 27,496 organic; 15,684 nutrient; 13,016 physical property; 10,307 major inorganic; 6,773 sediment; and 649 other constituent values. There are large variations in the data. For example, EMCs for total suspended solids and total phosphorus range from 0.4 to 5,440 mg/L and 0.004 to 22 mg/L, respectively; geometric means range from 1.58 to 1,379 mg/L and 0.017 to 2.82 mg/L for these constituents, respectively. The example simulations indicate that risks for adverse effects of runoff can vary by orders of magnitude; the HRDB and SELDM facilitate selection of representative statistics from available datasets.

Transportation Research Record↗
USGS1992

Causes of mortality in common loons

Summarized are necropsy results from 222 carcasses of Common Loons ( Gavia immer ) submitted to the National Wildlife Health Research Center from 1976 through 1991. The carcasses were from 18 states, and 10 or more birds each were from Minnesota, Florida, Virginia, Michigan, Wisconsin, Maine, and North Carolina. Seventy-three (33%) carcasses were emaciated, and in some of these birds emaciation was thought to be related to exposure to mercury. OVer 40% of these emaciated birds were from Florida. Trauma, including blunt trauma of unknown origin, outboard motor propeller wounds, and shooting caused the deaths of 49 (22%) loons, 30 of which were from Minnesota. Diseases, primarily avian botulism type E and aspergillosis, account for 39 (18%) moralities and lead poisoning for 14 (6%), 11 of which had fishing sinkers in their stomachs. Most of the avian botulism type E cases occurred during two outbreaks on Lake Michigan. Seven of the 14 lead-poisoned birds were from Minnesota. Nine (4%) birds died of miscellaneous causes and 9 (4%) of drowning, primarily from entanglement in nets. No diagnosis could be reached for 29 (13%) carcasses. Sample bias precludes interpretation of these data to represent actual proportional causes of mortality in the loon population. However, the sample size is sufficient to clearly identify major causes of mortality.

Minnesota, Florida, Virginia, Michigan, Wisconsin,↗
USGS2015

Coevolution of bed surface patchiness and channel morphology: 2. Numerical experiments

In gravel bed rivers, bed topography and the bed surface grain size distribution evolve simultaneously, but it is not clear how feedbacks between topography and grain sorting affect channel morphology. In this, the second of a pair of papers examining interactions between bed topography and bed surface sorting in gravel bed rivers, we use a two-dimensional morphodynamic model to perform numerical experiments designed to explore the coevolution of both free and forced bars and bed surface patches. Model runs were carried out on a computational grid simulating a 200 m long, 2.75 m wide, straight, rectangular channel, with an initially flat bed at a slope of 0.0137. Over five numerical experiments, we varied (a) whether an obstruction was present, (b) whether the sediment was a gravel mixture or a single size, and (c) whether the bed surface grain size feeds back on the hydraulic roughness field. Experiments with channel obstructions developed a train of alternate bars that became stationary and were connected to the obstruction. Freely migrating alternate bars formed in the experiments without channel obstructions. Simulations incorporating roughness feedbacks between the bed surface and flow field produced flatter, broader, and longer bars than simulations using constant roughness or uniform sediment. Our findings suggest that patches are not simply a by-product of bed topography, but they interact with the evolving bed and influence morphologic evolution.

Journal of Geophysical Research F: Earth Surface↗
USGS2010

Tidal calibration of Plate Boundary Observatory borehole strainmeters: Roles of vertical and shear coupling

A multicomponent borehole strainmeter directly measures changes in the diameter of its cylindrical housing at several azimuths. To transform these measurements to formation strains requires a calibration matrix, which must be estimated by analyzing the installed strainmeter's response to known strains. Typically, theoretical calculations of Earth tidal strains serve as the known strains. This paper carries out such an analysis for 12 Plate Boundary Observatory (PBO) borehole strainmeters, postulating that each of the strainmeters' four gauges responds ("couples") to all three horizontal components of the formation strain tensor, as well as to vertical strain. Orientation corrections are also estimated. The fourth extensometer in each PBO strainmeter provides redundant information used to reduce the chance that coupling coefficients could be misleadingly fit to inappropriate theoretical tides. Satisfactory fits between observed and theoretically calculated tides were obtained for three PBO strainmeters in California, where the calculated tides are corroborated by other instrumentation, as well as for six strainmeters in Oregon and Washington, where no other instruments have ever recorded Earth tidal strain. Several strainmeters have unexpectedly large coupling coefficients for vertical strain, which increases the strainmeter's response to atmospheric pressure. Vertical coupling diminishes, or even changes the sign of, the apparent response to areal strain caused by Earth tides or deep Earth processes because near the free surface, vertical strains are opposite in sign to areal strain. Vertical coupling does not impair the shear strain response, however. PBO borehole strainmeters can provide calibrated shear strain time series of transient strain associated with tectonic or magmatic processes.

Journal of Geophysical Research↗
USGS2016

Federal collaboration in science for invasive mammal management in U.S. National Parks and Wildlife Refuges of the Pacific Islands

Some of the most isolated islands in the Pacific Ocean are home to US National Parks and Wildlife Refuges. These islands are known for flora and fauna that occur nowhere else, but also for invasive species and other factors which have resulted in the disproportionate extinction of native species. The control of invasive mammals is the single most expensive natural resource management activity essential for restoring ecological integrity to parks in the Hawaiian Islands, American Samoa, and the islands of Guam and Saipan. Science-based applications supporting management efforts have been shaped by longstanding collaborative federal research programs over the past four decades. Consequently, feral goats (Capra hircus) have been removed from >690 km2 in National Parks, and feral pigs (Sus scrofa) have been removed from >367 km2 of federal lands of Hawai‘i, bringing about the gradual recovery of forest ecosystems. The exclusion of other non-native ungulates and invasive mammals is now being undertaken with more sophisticated control techniques and fences. New fence designs are now capable of excluding feral cats (Felis catus) from large areas to protect endangered native waterfowl and nesting seabirds. Rodenticides which have been tested and registered for hand and aerial broadcast in Hawai‘i have been used to eradicate rats from small offshore islands to protect nesting seabirds and are now being applied to montane environments of larger islands to protect forest birds. Forward-looking infrared radar (FLIR) is also being applied to locate wild ungulates which were more recently introduced to some islands. All invasive mammals have been eradicated from some remote small islands, and it may soon be possible to manage areas on larger islands to be free of invasive mammals at least during seasonally important periods for native species.

Conference Paper↗
USGS1956

Host rocks and their alterations as related to uranium-bearing veins in the United States

This paper, dealing with the different kinds of host rocks and their alterations associated with uranium-bearing veins in the United States, is a chapter of a comprehensive report entitled , "Geology of uranium-bearing vein deposits in the United States," in preparation by George W. Walker, Frank W. Osterwald, and others. The comprehensive report will include detailed information on tectonic and structural setting, kinds of host rocks, wall-rock alteration, mineralogy, physical characteristics, processes of deposition, and concepts of origin of uraniferous veins; but, because it will not be completed until sometime in the future, some chapters of the report are being transmitted as they are finished. Part of an introductory chapter to the comprehensive report entitled, "Classification and distribution of uranium-bearing veins in the United States" (Walker and Osterwald, 1956) has already been transmitted; several of the terms used herein are defined in the introductory chapter. Data included in this chapter demonstrate that uranium-bearing veins are: 1) in rocks of nearly all textural, chemical, and mineralogic types; 2) most abundant in holocrystalline, commonly equigranular, igeneous and metamorphic rocks characterized by a moderate to high silica content and and by similar physical properties. Although some of the physiochemical properties of the host rocks are discussed in terms of favorability or nonfavoribility for uranium deposition, the principal purpose of this chapter is to establish the petroloic environment in which uranium-bearing veins have been found. Because favorability or nonfavorability of host rocks is related complexly to the chemistry of ore solutions and to methods or uranium transport and deposition, several hypothetical processes of transport and deposition have been referred to briefly; these and other hypotheses will be outlines and discussed in greater detail in a subsequent chapter. The compilation of data leading to this report and its preparation by a member of the Uranium Research and Resource Section, U.S. Geological Survey, was done on behalf of the Division of Raw Materials, U.S. Atomic Energy Commission. The report is based on both published and unpublished information collected principally by personnel of the U.S. Geological Survey, the U.S. Atomic Energy Commission or its predecessor organization, the Manhattan Engineer District, and to a lesser extent by staff members of other Federal or State agencies and by geologists in private industry. Information concerning foreign uranium-bearing vein deposits has been extracted almost exclusively from published reports; references to these and other data are included at appropriate places.

Trace Elements Investigations↗