SEARCH · USGS Science

Results for “Evolution”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97Linked to original sources

USGS2021

Insights on the characteristics and sources of gas from an underground coal mine using compositional data analysis

Coal mine gas originates from the gas emission zone (GEZ) of the mine, as well as the longwall face and pillars. Gas emissions are controlled directly at the sources using horizontal or vertical boreholes drilled from surface or from the entries in advance of mining, or it is captured from the fractured and caved zones (gob) using ventholes during mining. The rest of the gas, especially that gas that originates from the longwall face and caved zone, mixes with the ventilation air and travels through bleeder and return entries before being exhausted to atmosphere from air shafts. Although the gas associated with mining mostly focuses on methane, the gas is not pure methane but is a mixture (where both the components and their quantities vary depending on the sampling location). Understanding the evolution of the composition of the gas from source to different sampling and evaluation points in mines using proper statistical analysis and interpretation methods can lead to better designed degasification and ventilation systems and the selection of the most adequate utilization method for generating energy from the gas. In this work, we present the results of compositional data analysis (CoDa) of gases sampled at different locations in a longwall mine operating in Pennsylvanian coal-bearing strata in the Northern Appalachian coal basin. Sampling locations were from accessible parts of the bleeder entries, returns, bleeder evaluation points and shafts within the mine, and also from gob gas ventholes (GGV) and coal degasification boreholes drilled in the panel areas. In addition, desorbed gas samples from seams that are important for the mine were included in the analyses for comparison. The compositional data analysis showed that the gas composition shifts based on the sampling location, putting in-mine and pure coalbed gases on the opposite ends. Removal of air from the samples did not change this observation suggesting that oxygen is depleted especially for in-mine samples, which is due to oxidation. Results also suggested that desorbed gas samples may not represent the composition of the coal seam gas.

International Journal of Coal Geology↗

USGS2008

Evaluation of the physical process controlling beach changes adjacent to nearshore dredge pits

Numerical modeling of a beach nourishment project is conducted to enable a detailed evaluation of the processes associated with the effects of nearshore dredge pits on nourishment evolution and formation of erosion hot spots. A process-based numerical model, Delft3D, is used for this purpose. The analysis is based on the modification of existing bathymetry to simulate "what if" scenarios with/without the bathymetric features of interest. Borrow pits dredged about 30??years ago to provide sand for the nourishment project have a significant influence on project performance and formation of erosional hot spots. It was found that the main processes controlling beach response to these offshore bathymetric features were feedbacks between wave forces (roller force or alongshore component of the radiation stress), pressure gradients due to differentials in wave set-up/set-down and bed shear stress. Modeling results also indicated that backfilling of selected borrow sites showed a net positive effect within the beach fill limits and caused a reduction in the magnitude of hot spot erosion. ?? 2008 Elsevier B.V. All rights reserved.

Coastal Engineering↗

USGS2014

Evaluation of wave runup predictions from numerical and parametric models

Wave runup during storms is a primary driver of coastal evolution, including shoreline and dune erosion and barrier island overwash. Runup and its components, setup and swash, can be predicted from a parameterized model that was developed by comparing runup observations to offshore wave height, wave period, and local beach slope. Because observations during extreme storms are often unavailable, a numerical model is used to simulate the storm-driven runup to compare to the parameterized model and then develop an approach to improve the accuracy of the parameterization. Numerically simulated and parameterized runup were compared to observations to evaluate model accuracies. The analysis demonstrated that setup was accurately predicted by both the parameterized model and numerical simulations. Infragravity swash heights were most accurately predicted by the parameterized model. The numerical model suffered from bias and gain errors that depended on whether a one-dimensional or two-dimensional spatial domain was used. Nonetheless, all of the predictions were significantly correlated to the observations, implying that the systematic errors can be corrected. The numerical simulations did not resolve the incident-band swash motions, as expected, and the parameterized model performed best at predicting incident-band swash heights. An assimilated prediction using a weighted average of the parameterized model and the numerical simulations resulted in a reduction in prediction error variance. Finally, the numerical simulations were extended to include storm conditions that have not been previously observed. These results indicated that the parameterized predictions of setup may need modification for extreme conditions; numerical simulations can be used to extend the validity of the parameterized predictions of infragravity swash; and numerical simulations systematically underpredict incident swash, which is relatively unimportant under extreme conditions.

Coastal Engineering↗

USGS2016

Wave attenuation in the shallows of San Francisco Bay

Waves propagating over broad, gently-sloped shallows decrease in height due to frictional dissipation at the bed. We quantified wave-height evolution across 7 km of mudflat in San Pablo Bay (northern San Francisco Bay), an environment where tidal mixing prevents the formation of fluid mud. Wave height was measured along a cross shore transect (elevation range−2mto+0.45mMLLW) in winter 2011 and summer 2012. Wave height decreased more than 50% across the transect. The exponential decay coefficient λ was inversely related to depth squared (λ=6×10 −4 h −2 ). The physical roughness length scale k b , estimated from near-bed turbulence measurements, was 3.5×10 −3 m in winter and 1.1×10 −2 m in summer. Estimated wave friction factor f w determined from wave-height data suggests that bottom friction dominates dissipation at high Re w but not at low Re w . Predictions of near-shore wave height based on offshore wave height and a rough formulation for f w were quite accurate, with errors about half as great as those based on the smooth formulation for f w . Researchers often assume that the wave boundary layer is smooth for settings with fine-grained sediments. At this site, use of a smooth f w results in an underestimate of wave shear stress by a factor of 2 for typical waves and as much as 5 for more energetic waves. It also inadequately captures the effectiveness of the mudflats in protecting the shoreline through wave attenuation.

California↗

USGS2018

Wave attenuation across a tidal marsh in San Francisco Bay

Wave attenuation is a central process in the mechanics of a healthy salt marsh. Understanding how wave attenuation varies with vegetation and hydrodynamic conditions informs models of other marsh processes that are a function of wave energy (e.g. sediment transport) and allows for the incorporation of marshes into coastal protection plans. Here, we examine the evolution of wave height across a tidal salt marsh in San Francisco Bay. Instruments were deployed along a cross-shore transect, starting on the mudflat and crossing through zones dominated by Spartina foliosa and Salicornia pacifica . This dataset is the first to quantify wave attenuation for these vegetation species, which are abundant in the intertidal zone of California estuaries. Measurements were collected in the summer and winter to assess seasonal variation in wave attenuation. Calculated drag coefficients of S. foliosa and S. pacifica were similar, indicating equal amounts of vegetation would lead to similar energy dissipation; however, S. pacifica has much greater biomass close to the bed (<20 cm) and retains biomass throughout the year, and therefore, it causes more total attenuation. S. foliosa dies back in the winter, and waves often grow across this section of the marsh. For both vegetation types, attenuation was greatest for low water depths, when the vegetation was emergent. For both seasons, attenuation rates across S. pacifica were the highest and were greater than published attenuation rates across similar ( Spartina alterniflora ) salt marshes for the comparable depths. These results can inform designs for marsh restorations and management plans in San Francisco Bay and other estuaries containing these species.

California↗

USGS2018

A framework for modeling scenario-based barrier island storm impacts

Methods for investigating the vulnerability of existing or proposed coastal features to storm impacts often rely on simplified parametric models or one-dimensional process-based modeling studies that focus on changes to a profile across a dune or barrier island. These simple studies tend to neglect the impacts to curvilinear or alongshore varying island planforms, influence of non-uniform nearshore hydrodynamics and sediment transport, irregular morphology of the offshore bathymetry, and impacts from low magnitude wave events (e.g. cold fronts). Presented here is a framework for simulating regionally specific, low and high magnitude scenario-based storm impacts to assess the alongshore variable vulnerabilities of a coastal feature. Storm scenarios based on historic hydrodynamic conditions were derived and simulated using the process-based morphologic evolution model XBeach. Model results show that the scenarios predicted similar patterns of erosion and overwash when compared to observed qualitative morphologic changes from recent storm events that were not included in the dataset used to build the scenarios. The framework model simulations were capable of predicting specific areas of vulnerability in the existing feature and the results illustrate how this storm vulnerability simulation framework could be used as a tool to help inform the decision-making process for scientists, engineers, and stakeholders involved in coastal zone management or restoration projects.

Chandeleur Islands↗

USGS2006

The Cretaceous Tetori biota in Japan and its evolutionary significance for terrestrial ecosystems in Asia

Cretaceous nonmarine deposits are widely distributed on the Asian continent and include various kinds of zoo- and phyto-assemblages. The Tetori Group is one of the most important Mesozoic terrestrial deposits in East Asia, and for this reason its geology, stratigraphy, and biota have been studied intensively by our group for more than a decade. We present the main results herein. We confirm that formations as lithostratigraphic units are the best geological correlation tools for the Tetori Group and the best tools for a geological mapping of the group. Although subgroups have previously been used for correlation, proper designation and evaluation of subgroups is required if they are to be used effectively, and we show that previous geological correlation of the Tetori Group has been confused by inappropriate definition of these subgroups. We located fossil localities including reported zoo- and phyto-assemblages in the framework of formations correlated by our stratigraphy. The occurrence of zoo-assemblages was probably controlled by environments (i.e., most are in situ), but phyto-assemblages were mostly transported and rapidly buried by high-energy river systems. Although two distinct dinosaur faunas and four floras have been named for the zoo- and phyto-assemblages in the Tetori Group, in reality there is only one Tetori Dinosaur Fauna and one Tetori Flora, as proved by careful correlation. Two types of zoo-assemblages co-occur in the Tetori Group: vertebrate species whose ancestors flourished in the Jurassic (as found in China), and their descendants from the Late Cretaceous. As the latter modern type of assemblage is more abundant than the former, changeable environments at the continental margin probably accelerated evolution of more modern species. We can employ nonmarine molluscan species as geological correlation tools in some cases, i.e., when their taxon ranges are well-confirmed by independent evidence. However, because freshwater molluscan species and terrestrial vertebrate species had many opportunities to move to optimum habitat as environments changed through time on the Cretaceous Asian continent, their correlation potential is uncertain. Many nonmarine molluscan species from the Japanese and Chinese Cretaceous had their stratigraphic occurrences controlled by changing environments. ?? 2005 Elsevier Ltd. All rights reserved.

Cretaceous Research↗

USGS2008

Storm-driven sediment transport in Massachusetts Bay

Massachusetts Bay is a semi-enclosed embayment in the western Gulf of Maine about 50 km wide and 100 km long. Bottom sediment resuspension is controlled predominately by storm-induced surface waves and transport by the tidal- and wind-driven circulation. Because the Bay is open to the northeast, winds from the northeast ('Northeasters') generate the largest surface waves and are thus the most effective in resuspending sediments. The three-dimensional oceanographic circulation model Regional Ocean Modeling System (ROMS) is used to explore the resuspension, transport, and deposition of sediment caused by Northeasters. The model transports multiple sediment classes and tracks the evolution of a multilevel sediment bed. The surficial sediment characteristics of the bed are coupled to one of several bottom-boundary layer modules that calculate enhanced bottom roughness due to wave-current interaction. The wave field is calculated from the model Simulating WAves Nearshore (SWAN). Two idealized simulations were carried out to explore the effects of Northeasters on the transport and fate of sediments. In one simulation, an initially spatially uniform bed of mixed sediments exposed to a series of Northeasters evolved to a pattern similar to the existing surficial sediment distribution. A second set of simulations explored sediment-transport pathways caused by storms with winds from the northeast quadrant by simulating release of sediment at selected locations. Storms with winds from the north cause transport southward along the western shore of Massachusetts Bay, while storms with winds from the east and southeast drive northerly nearshore flow. The simulations show that Northeasters can effectively transport sediments from Boston Harbor and the area offshore of the harbor to the southeast into Cape Cod Bay and offshore into Stellwagen Basin. This transport pattern is consistent with Boston Harbor as the source of silver found in the surficial sediments of Cape Cod Bay and Stellwagen Basin.

Massachusetts↗

USGS2008

Anatomy of a shoreface sand ridge revisited using foraminifera: False Cape Shoals, Virginia/North Carolina inner shelf

Certain details regarding the origin and evolution of shelf sand ridges remain elusive. Knowledge of their internal stratigraphy and microfossil distribution is necessary to define the origin and to determine the processes that modify sand ridges. Fourteen vibracores from False Cape Shoal A, a well-developed shoreface-attached sand ridge on the Virginia/North Carolina inner continental shelf, were examined to document the internal stratigraphy and benthic foraminiferal assemblages, as well as to reconstruct the depositional environments recorded in down-core sediments. Seven sedimentary and foraminiferal facies correspond to the following stratigraphic units: fossiliferous silt, barren sand, clay to sandy clay, laminated and bioturbated sand, poorly sorted massive sand, fine clean sand, and poorly sorted clay to gravel. The units represent a Pleistocene estuary and shoreface, a Holocene estuary, ebb tidal delta, modern shelf, modern shoreface, and swale fill, respectively. The succession of depositional environments reflects a Pleistocene sea-level highstand and subsequent regression followed by the Holocene transgression in which barrier island/spit systems formed along the Virginia/North Carolina inner shelf ???5.2 ka and migrated landward and an ebb tidal delta that was deposited, reworked, and covered by shelf sand.

Continental Shelf Research↗

USGS2017

Inner-shelf ocean dynamics and seafloor morphologic changes during Hurricane Sandy

Hurricane Sandy was one of the most destructive hurricanes in US history, making landfall on the New Jersey coast on Oct 30, 2012. Storm impacts included several barrier island breaches, massive coastal erosion, and flooding. While changes to the subaerial landscape are relatively easily observed, storm-induced changes to the adjacent shoreface and inner continental shelf are more difficult to evaluate. These regions provide a framework for the coastal zone, are important for navigation, aggregate resources, marine ecosystems, and coastal evolution. Here we provide unprecedented perspective regarding regional inner continental shelf sediment dynamics based on both observations and numerical modeling over time scales associated with these types of large storm events. Oceanographic conditions and seafloor morphologic changes are evaluated using both a coupled atmospheric-ocean-wave-sediment numerical modeling system and observation analysis from a series of geologic surveys and oceanographic instrument deployments focused on a region offshore of Fire Island, NY. The geologic investigations conducted in 2011 and 2014 revealed lateral movement of sedimentary structures of distances up to 450 m and in water depths up to 30 m, and vertical changes in sediment thickness greater than 1 m in some locations. The modeling investigations utilize a system with grid refinement designed to simulate oceanographic conditions with progressively increasing resolutions for the entire US East Coast (5-km grid), the New York Bight (700-m grid), and offshore of Fire Island, NY (100-m grid), allowing larger scale dynamics to drive smaller scale coastal changes. Model results in the New York Bight identify maximum storm surge of up to 3 m, surface currents on the order of 2 ms-1 along the New Jersey coast, waves up to 8 m in height, and bottom stresses exceeding 10 Pa. Flow down the Hudson Shelf Valley is shown to result in convergent sediment transport and deposition along its axis. Modeled sediment redistribution along Fire Island showed erosion across the crests of inner shelf sand ridges and sedimentation in adjacent troughs, consistent with the geologic observations.

Continental Shelf Research↗

USGS2019

Observations of mixing and transport on a steep beach

Surfzone mixing and transport on a sandy, steep (∼1/8 slope), reflective beach at Carmel River State Beach, California, are described for a range of wave and alongshore flow conditions. Depth-limited wave breaking occurred close to the shore due to the steepness of the beach, creating a narrow surf/swash zone (∼10 m wide). Fluorescent Rhodamine dye was released as a slug in the surfzone, and the temporal and spatial evolution was measured using in-situ dye sensors. Dye concentration measured as a function of time reveals sharp fronts that quickly decay resulting in narrow peaks near the dye release, which subsequently broaden and decrease in peak concentration with alongshore distance. The measurements indicate two stages of mixing and transport occur inside the surfzone on the steep beach. 1) In the near-field (<50 m downstream of the dye release location), the dye fully mixed throughout the water column after a few incident waves then continued to disperse in two dimensions, with both advection and diffusion processes being important. 2) In the far-field (>50 m downstream from the dye release location), the mass transport was dominated by advection. The distance to the far-field is much shorter in the alongshore on a steep beach compared with a dissipative beach. Estimates of cross-shore and alongshore diffusion coefficients ( κ x , κ y ) were found to be similar in magnitude within the surfzone. Outside the surfzone in the far-field, the results suggest that the mixing processes are independent of those inside the surfzone. The mixing and transport of material observed on this steep beach are found to be analogous to that previously measured on dissipative beaches, however the diffusion coefficients within and outside the surfzone were found to be smaller on this steep beach.

California↗

USGS2011

Description of an elasmobranch TCR coreceptor: CD8α from Rhinobatos productus

Cell-mediated immunity plays an essential role for the control and eradication of intracellular pathogens. To learn more about the evolutionary origins of the first signal (Signal 1) for T-cell activation, we cloned CD8α from an elasmobranch, Rhinobatos productus. Similar to full-length CD8α cDNAs from other vertebrates, Rhpr-CD8α (1800 bp) encodes a 219 amino acid open reading frame composed of a signal peptide, an extracellular IgSF V domain and a stalk/hinge region followed by a well-conserved transmembrane domain and cytoplasmic tail. Overall, the mature Rhpr-CD8α protein (201 aa) displays ~30% amino acid identity with mammalian CD8α including absolute conservation of cysteine residues involved in the IgSf V domain fold and dimerization of CD8αα and CD8αβ. One prominent feature is the absence of the LCK association motif (CXC) that is needed for achieving signal 1 in tetrapods. Both elasmobranch and teleost CD8α protein sequences possess a similar but distinctly different motif (CXH) in the cytoplasmic tail. The overall genomic structure of CD8α has been conserved during the course of vertebrate evolution both for the number of exons and phase of splicing. Finally, quantitative RTPCR demonstrated that elasmobranch CD8α is expressed in lymphoid-rich tissues similar to CD8 in other vertebrates. The results from this study indicate the existence of CD8 prior to the emergence of the gnathostomes (>450 MYA) while providing evidence that the canonical LCK association motif in mammals is likely a derived characteristic of tetrapod CD8α, suggesting potential differences for T-cell education and activation in the various gnathostomes.

Developmental and Comparative Immunology↗

USGS2005

Sub-seafloor acoustic characterization of seamounts near the Ogasawara Fracture Zone in the western Pacific using chirp (3-7 kHz) subbottom profiles

A detailed analysis of chirp (3-7 kHz) subbottom profiles and bathymetry was performed on data collected from seamounts near the Ogasawara Fracture Zone (OFZ) in the western Pacific. The OFZ, which is a 150 km wide rift zone showing 600 km of right-lateral movement in a NW-SE direction, is unique among the fracture zones of the Pacific in that it includes many old seamounts (e.g., Magellan Seamounts and seamounts on Dutton Ridge). Sub-seafloor acoustic echoes on the seamounts are classified into nine specific types based on the nature and continuity of the echoes, subbottom structure, and morphology of the seafloor: (1) distinct echoes (types I-1, I-2, I-3), (2) indistinct echoes (types II-1, II-2, II-3), and (3) hyperbolic echoes (types III-1, III-2, III-3). Type I-2 pelagic sediments, characterized by thin and intermittent coverage, were probably deposited in topographically sheltered areas when bottom currents were strong, whereas type I-1 pelagic sediments accumulated during continuous and widespread sedimentation. Development of seamount flank rift zones in the OFZ may have been influenced by preexisting structures in the transform fracture zone at the time of volcanism, whereas those on Ita Mai Tai seamount in the Pigafetta Basin originated solely by edifice-building processes. Flank rift zones that formed by dike intrusions and eruptions played an important role in mass wasting. Mass-wasting processes included block faulting or block slides around the summit margin, sliding/slumping, debris flows, and turbidites, which may have been triggered by faulting, volcanism, dike injection, and weathering during various stages in the evolution of the seamounts. ?? 2005 Elsevier Ltd. All rights reserved.

Deep-Sea Research Part I: Oceanographic Research P↗

USGS2007

Authigenic carbonate formation at hydrocarbon seeps in continental margin sediments: A comparative study

Authigenic carbonates from five continental margin locations, the Eel River Basin, Monterey Bay, Santa Barbara Basin, the Sea of Okhotsk, and the North Sea, exhibit a wide range of mineralogical and stable isotopic compositions. These precipitates include aragonite, low- and high-Mg calcite, and dolomite. The carbon isotopic composition of carbonates varies widely, ranging from −60‰ to +26‰, indicating complex carbon sources that include 13 C-depleted microbial and thermogenic methane and residual, 13 C-enriched, bicarbonate. A similarly large variability of δ 18 O values (−5.5‰ to +8.9‰) demonstrates the geochemical complexity of these sites, with some samples pointing toward an 18 O-enriched oxygen source possibly related to advection of 18 O-enriched formation water or to the decomposition of gas hydrate. Samples depleted in 18 O are consistent with formation deeper in the sediment or mixing of pore fluids with meteoric water during carbonate precipitation. A wide range of isotopic and mineralogical variation in authigenic carbonate composition within individual study areas but common trends across multiple geographic areas suggest that these parameters alone are not indicative for certain tectonic or geochemical settings. Rather, the observed variations probably reflect local controls on the flux of carbon and other reduced ions, such as faults, fluid conduits, the presence or absence of gas hydrate in the sediment, and the temporal evolution of the local carbon reservoir. Areas with seafloor carbonates that indicate formation at greater depth below the sediment–water interface must have undergone uplift and erosion in the past or are still being uplifted. Consequently, the occurrence of carbonate slabs on the seafloor in areas of active hydrocarbon seepage is commonly an indicator of exhumation following carbonate precipitation in the shallow subsurface. Therefore, careful petrographic and geochemical analyses are critical components necessary for the correct interpretation of processes related to hydrocarbon seepage in continental margin environments and elsewhere.

Deep-Sea Research Part II: Topical Studies in Ocea↗

USGS2013

Cold-seep habitat mapping: high-resolution spatial characterization of the Blake Ridge Diapir seep field

Relationships among seep community biomass, diversity, and physiographic controls such as underlying geology are not well understood. Previous efforts to constrain these relationships at the Blake Ridge Diapir were limited to observations from piloted deep-submergence vehicles. In August 2012, the autonomous underwater vehicle (AUV) Sentry collected geophysical and photographic data over a 0.131 km2 area at the Blake Ridge Diapir seeps. A nested survey approach was used that began with a regional or reconnaissance-style survey using sub-bottom mapping systems to locate and identify seeps and underlying conduits. This survey was followed by AUV-mounted sidescan sonar and multibeam echosounder systems mapping on a mesoscale to characterize the seabed physiography. At the most detailed survey level, digital photographic imaging was used to resolve sub-meter characteristics of the biology. Four pockmarks (25–70 m diameter) were documented, each supporting chemosynthetic communities. Concentric zonation of mussels and clams suggests the influence of chemical gradients on megafaunal distribution. Data collection and analytical techniques used here yield high-resolution habitat maps that can serve as baselines to constrain temporal evolution of seafloor seeps, and to inform ecological niche modeling and resource management.

Deep-Sea Research Part II: Topical Studies in Ocea↗

USGS2005

Macropolygon morphology, development, and classification on North Panamint and Eureka playas, Death Valley National Park CA

Panamint and Eureka playas, both located within Death Valley National Park, exhibit a host of surficial features including fissures, pits, mounds, and plant-covered ridges, representing topographic highs and lows that vary up to 2 m of relief from the playa surface. Aerial photographs reveal that these linear strands often converge to form polygons, ranging in length from several meters to nearly a kilometer. These features stand out in generally dark contrast to the brighter intervening expanse of flat, plant-free, desiccated mud of the typical playa surface. Ground-truth mapping of playa features with differential GPS (Global Positioning System) was conducted in 1999 (North Panamint Valley) and 2002 (Eureka Valley). High-resolution digital maps reveal that both playas possess macropolygons of similar scale and geometry, and that fissures may be categorized into one of two genetic groups: (1) shore-parallel or playa-interior desiccation and shrinkage; and (2) tectonic-induced cracks. Early investigations of these features in Eureka Valley concluded that their origin may have been related to agricultural activity by paleo-Indian communities. Although human artifacts are abundant at each locale, there is no evidence to support the inference that surface features reported on Eureka Playa are anthropogenic in origin. Our assumptions into the genesis of polygons on playas is based on our fortuitous experience of witnessing a fissure in the process of formation on Panamint Playa after a flash flood (May 1999); our observations revealed a paradox that saturation of the upper playa crusts contributes to the establishment of some desiccation features. Follow-up visits to the same feature over 2 yrs' time are a foundation for insight into the evolution and possible longevity of these features. ?? 2005 Elsevier B.V. All rights reserved.

Earth-Science Reviews↗

USGS2015

Analyzing high resolution topography for advancing the understanding of mass and energy transfer through landscapes: A review

The study of mass and energy transfer across landscapes has recently evolved to comprehensive considerations acknowledging the role of biota and humans as geomorphic agents, as well as the importance of small-scale landscape features. A contributing and supporting factor to this evolution is the emergence over the last two decades of technologies able to acquire high resolution topography (HRT) (meter and sub-meter resolution) data. Landscape features can now be captured at an appropriately fine spatial resolution at which surface processes operate; this has revolutionized the way we study Earth-surface processes. The wealth of information contained in HRT also presents considerable challenges. For example, selection of the most appropriate type of HRT data for a given application is not trivial. No definitive approach exists for identifying and filtering erroneous or unwanted data, yet inappropriate filtering can create artifacts or eliminate/distort critical features. Estimates of errors and uncertainty are often poorly defined and typically fail to represent the spatial heterogeneity of the dataset, which may introduce bias or error for many analyses. For ease of use, gridded products are typically preferred rather than the more information-rich point cloud representations. Thus many users take advantage of only a fraction of the available data, which has furthermore been subjected to a series of operations often not known or investigated by the user. Lastly, standard HRT analysis work-flows are yet to be established for many popular HRT operations, which has contributed to the limited use of point cloud data. In this review, we identify key research questions relevant to the Earth-surface processes community within the theme of mass and energy transfer across landscapes and offer guidance on how to identify the most appropriate topographic data type for the analysis of interest. We describe the operations commonly performed from raw data to raster products and we identify key considerations and suggest appropriate work-flows for each, pointing to useful resources and available tools. Future research directions should stimulate further development of tools that take advantage of the wealth of information contained in the HRT data and address the present and upcoming research needs such as the ability to filter out unwanted data, compute spatially variable estimates of uncertainty and perform multi-scale analyses. While we focus primarily on HRT applications for mass and energy transfer, we envision this review to be relevant beyond the Earth-surface processes community for a much broader range of applications involving the analysis of HRT.

Earth-Science Reviews↗

USGS2018

Distinguishing brackish lacustrine from brackish marine deposits in the stratigraphic record: A case study from the late Miocene and early Pliocene Bouse Formation, Arizona and California, USA

Brackish marine and brackish continental environments are fundamentally different from a compositional perspective. Brackish water is often defined as having salinity lower than that of standard seawater but higher than that of freshwater, but less regard is given to the origin of the salts involved. The simple dilution of standard seawater by freshwater in a coastal or estuarine setting constitutes a brackish environment, but so do lakes where continental fresh water is impounded and becomes more saline through a variety of solute evolution pathways. The range of potential compositions of brackish lake water is diverse and includes water with “seawater-like” compositions. Isolated brackish lake environments located hundreds of kilometers inland can evolve towards sodium chloride-dominated, low alkalinityenvironments that mimic the composition of brackish seawater environments. These types of lakes can harbor a variety of continentally invasive but typically marine organisms, including but not limited to algae, foraminifers, mollusks, diatoms, and crustaceans . Distinguishing brackish marine from brackish lake environments in the geologic record can be difficult. In this paper, the enigmatic late Miocene and early Pliocene southern Bouse Formation of southern Arizona and California, USA, considered by many to represent a marine transgression along the lower Colorado River corridor, is discussed within a broad framework that incorporates hydrochemical, biogeographical, and species niche concepts. A brackish lake interpretation provides a powerful platform that can comprehensively account for the enigmatic mixed marine and continental fossil assemblage and possible tidal rhythmites that feature prominently in the southern Bouse Formation controversy. A review of the broader regional (paleo)environmental context for the southern Bouse supports a sodium chloride-dominated, low alkalinity, mildly brackish (10-5 ppt) Colorado River-fed lake depositional environment that was populated by an intriguing but predictable array of euryhaline, opportunistic, and continentally invasive marginal marine organisms.

Arizona, California↗