USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97Linked to original sources

An environmental tolerance index for ostracodes as indicators of physical and chemical factors in aquatic habitats

Continental ostracode occurrences reflect salinity, solute composition, temperature, flow conditions, and other environmental properties of the water they inhabit. Their occurrences also reflect the variability of many of these environmental parameters. Environmental tolerance indices (ETIs) offer a new way to express the nature of an ostracode's environment. As defined herein, ETIs range in value from zero to one, and may be calculated for continuous and binary variables. For continuous variables such as salinity, the ETI is the ratio of the range of values of salinity tolerated by an ostracode to the total range of salinity values from a representative database. In this investigation, the database of continuous variables consists of information from 341 sites located throughout the United States. Binary ETIs indicate whether an environmental variable such as flowing water affects ostracode presence or absence. The binary database consists of information from 784 sites primarily from Illinois, USA. ETIs were developed in this investigation to interpret paleohydrological changes implied by fossil ostracode successions. ETI profiles may be cast in terms of a weighted average, or on presence/absence. The profiles express ostracode tolerance of environmental parameters such as salinity or currents. Tolerance of a wide range of values is taken to indicate shallow water because shallow environments are conducive to thermal variability, short-term water residence, and the development of currents from wind-driven waves.

Conference Paper↗

Stratigraphic and climatic implications of clay mineral changes around the Paleocene/Eocene boundary of the northeastern US margin

Kaolinite usually is present in relatively small amounts in most upper Paleocene and lower Eocene neritic deposits of the northern US Atlantic Coastal Plain. However, there is a short period (less than 200,000 k.y.) in the latest Paleocene (upper part of calcareous nannoplankton Zone NP 9) when kaolinite-dominated clay mineral suites replaced the usual illite/smectite-dominated suites. During this time of global biotic and lithologic changes, kaolinite increased from less than 5% of the clay mineral suite to peak proportions of 50-60% of the suite and then returned to less than 5% in uppermost Paleocene/lowermost Eocene strata. This kaolinite pulse is present at numerous localities from southern Virginia to New Jersey. These sites represent both inner and middle neritic depositional environments and reflect input from several river drainage systems. Thus, it is inferred that kaolinite-rich source areas were widespread in the northeastern US during the latest Paleocene. Erosion of these source areas contributed the kaolinite that was transported and widely dispersed into shelf environments of the Salisbury embayment. The kaolinite increase, which occurred during a time of relatively high sea level, probably is the result of intensified weathering due to increased temperature and precipitation. The southern extent of the kaolinite pulse is uncertain in that uppermost Paleocene beds have not been identified in the southern Atlantic Coastal Plain. The late Paleocene kaolinite pulse that consists of an increase to peak kaolinite levels followed by a decrease can be used for detailed correlation between more upbasin and more downbasin sections in the Salisbury embayment. Correlations show that more upbasin Paleocene/Eocene boundary sections are erosionally truncated. They have varying portions of the kaolinite increase and, if present at all, discontinuous portions of the subsequent kaolinite decrease. As these truncated sections are disconformably overlain by lower Eocene strata, rapid erosional removal of large parts of the most kaolinite-rich P/E boundary clay deposits occurred by early Eocene time. Erosion of the kaolinite-rich P/E boundary beds was enhanced during times of sea-level fall when kaolinite-rich sediments were redeposited to produce kaolinite spikes in basal beds of lower and middle Eocene sequences that have little or no kaolinite elsewhere in the sequence. In contrast, more downbasin sites document only the upper, decreasing part of the kaolinite pulse. The absence of strata documenting the earlier kaolinite increase is attributed to slow sedimentation (condensed interval) as a result of a significant sea level rise that ponded most sediments in shallower waters, combined with the probable subsequent erosional removal of these thin downbasin deposits by oceanic currents.

Sedimentary Geology↗

Fin development in stream- and hatchery-reared Atlantic salmon

To determine the effect of development and environment on fin growth, we measured fin lengths of juvenile Atlantic salmon (Salmo salar) from two hatcheries (August, October and April-May), stream-reared fish (July and October) stocked as fry into two tributaries, and smelts from the main stem of the Connecticut River (May). For stream-reared parr, there was a linear relationship between the dorsal, caudal and anal fins with fork length, while the pectoral, pelvic and adipose fins exhibited a curvilinear relationship with fork length. Parr from a high gradient stream had larger caudal fins than fish from a low gradient stream, but other fins did not differ. Regression lines for the fins of stream-reared smelts were all linear when fin length was regressed against fork length. Stream-reared parr had larger pectoral, pelvic and anal fins than smolts of similar size while dorsal and caudal fin lengths did not differ. Regression equations formulated using the fins of stream-reared parr were used to calculate the percent difference (100 x observed fin length/expected) in fin lengths between stream- and hatchery-reared parr. The pelvic, adipose, caudal and anal fins of hatchery-reared parr showed no signs of degeneration by the first sampling period 7 months after hatching, whereas degeneration in the pectoral (13-20%) and dorsal (15-18%) fins was evident at this time. By the end of the study, degeneration was present in every fin except the adipose, with the pectoral (35-65%) and dorsal (32-58%) fins exhibiting the greatest amount of fin loss. All fins of hatchery-reared parr became shorter with time. There were minor differences in fin degeneration among parr from the two hatcheries, but the overall pattern of decreasing fin size was similar, indicating a common cause of fin degeneration. Comparison of stream- and hatchery-reared fish is a valuable means of determining the impact of captive environments on fin growth.

Aquaculture↗

Modeling Np and Pu transport with a surface complexation model and spatially variant sorption capacities: Implications for reactive transport modeling and performance assessments of nuclear waste disposal sites

One-dimensional (1D) geochemical transport modeling is used to demonstrate the effects of speciation and sorption reactions on the ground-water transport of Np and Pu, two redox-sensitive elements. Earlier 1D simulations (Reardon, 1981) considered the kinetically limited dissolution of calcite and its effect on ion-exchange reactions (involving 90 Sr, Ca, Na, Mg and K), and documented the spatial variation of a 90 Sr partition coefficient under both transient and steady-state chemical conditions. In contrast, the simulations presented here assume local equilibrium for all reactions, and consider sorption on constant potential, rather than constant charge, surfaces. Reardon's (1981) seminal findings on the spatial and temporal variability of partitioning (of 90 Sr) are reexamined and found partially caused by his assumption of a kinetically limited reaction. In the present work, sorption is assumed the predominant retardation process controlling Pu and Np transport, and is simulated using a diffuse-double-layer-surface-complexation (DDLSC) model. Transport simulations consider the infiltration of Np- and Pu-contaminated waters into an initially uncontaminated environment, followed by the cleanup of the resultant contamination with uncontaminated water. Simulations are conducted using different spatial distributions of sorption capacities (with the same total potential sorption capacity, but with different variances and spatial correlation structures). Results obtained differ markedly from those that would be obtained in transport simulations using constant K d , Langmuir or Freundlich sorption models. When possible, simulation results (breakthrough curves) are fitted to a constant K d advection–dispersion transport model and compared. Functional differences often are great enough that they prevent a meaningful fit of the simulation results with a constant K d (or even a Langmuir or Freundlich) model, even in the case of Np, a weakly sorbed radionuclide under the simulation conditions. Functional behaviors that cannot be fit include concentration trend reversals and radionuclide desorption spikes. Other simulation results are fit successfully but the fitted parameters ( K d and dispersivity) vary significantly depending on simulation conditions (e.g. “infiltration” vs. “cleanup” conditions). Notably, an increase in the variance of the specified sorption capacities results in a marked increase in the dispersion of the radionuclides. The results presented have implications for the simulation of radionuclide migration in performance assessments of nuclear waste-disposal sites, for the future monitoring of those sites, and more generally for modeling contaminant transport in ground-water environments.

Computers & Geosciences↗

Organic geochemistry in Pennsylvanian tidally influenced sediments from SW Indiana

Tidal rhythmites are vertically stacked small-scale sedimentary structures that record daily variations in tidal current energy and are known to overlie some low-sulfur coals in the Illinois Basin. Tidal rhythmites from the Pennsylvanian Brazil Formation in Indiana have been analyzed sedimentologically, petrographically, and geochemically in order to understand the character and distribution of organic matter (OM) preserved in an environment of daily interactions between marine and fresh waters. The concentration of organic matter (TOC) ranges from traces to 6.9% and sulfur rarely exceeds 0.1% in individual laminae. Angular vitrinite is the major organic matter type, accounting for 50-90% of total OM. The C/S ratio decreases as the verfical distance from the underlying coal increases. A decreasing C/S ratio coupled with decreases in Pr/Ph, Pr/n-C17, Ph/n-C18 ratios and a shift of carbon isotopic composition towards less negative values suggest an increase in salinity from freshwater in the mudflat tidal rhythmite facies close to the coal to brackish/marine in the sandflat tidal rhythmite facies further above from the coal. Within an interval spanning one year of deposition, TOC and S values show monthly variability. On a daily scale, TOC and S oscillations are still detectable but they are of lower magnitude than on a monthly scale. These small-scale variations are believed to reflect oscillations in water salinity related to tidal cycles.Tidal rhythmites are vertically stacked small-scale sedimentary structures that record daily variations in tidal current energy and are known to overlie some low-sulfur coals in the Illinois Basin. Tidal rhythmites from the Pennsylvanian Brazil Formation in Indiana have been analyzed sedimentologically, petrographically, and geochemically in order to understand the character and distribution of organic matter (OM) preserved in an environment of daily interactions between marine and fresh waters. The concentration of organic matter (TOC) ranges from traces to 6.9% and sulfur rarely exceeds 0.1% in individual laminae. Angular vitrinite is the major organic matter type, accounting for 50-90% of total OM. The C/S ratio decreases as the vertical distance from the underlying coal increases. A decreasing C/S ratio coupled with decreases in Pr/Ph, Pr/n-C17, Ph/n-C18 ratios and a shift of carbon isotopic composition towards less negative values suggest an increase in salinity from freshwater in the mudflat tidal rhythmite facies close to the coal to brackish/marine in the sandflat tidal rhythmite facies further above from the coal. Within an interval spanning one year of deposition, TOC and S values show monthly variability. On a daily scale, TOC and S oscillations are still detectable but they are of lower magnitude than on a monthly scale. These small-scale variations are believed to reflect oscillations in water salinity related to tidal cycles.

Organic Geochemistry↗

Organic geochemical study of sequences overlying coal seams; example from the Mansfield Formation (Lower Pennsylvanian), Indiana

Roof successions above two coal seams from the Mansfield Formation (Lower Pennsylvanian) in the Indiana portion of the Illinois Basin have been studied with regard to sedimentary structures, organic petrology and organic geochemistry. The succession above the Blue Creek Member of the Mansfield Formation is typical of the lithologies covering low-sulphur coals (< 1%) in the area studied, whereas the succession above the unnamed Mansfield coal is typical of high-sulphur coals (>2.%). The transgressive-regressive packages above both seams reflect the periodic inundation of coastal mires by tidal flats and creeks as inferred from bioturbation and sedimentary structures such as tidal rhythmites and clay-draped ripple bedforms. Geochemistry and petrology of organic facies above the Blue Creek coal suggest that tidal flats formed inland in fresh-water environments. These overlying fresh water sediments prevented saline waters from invading the peat, contributing to low-sulphur content in the coal. Above the unnamed coal, trace fossils and geochemical and petrological characteristics of organic facies suggest more unrestricted seaward depositional environment. The absence of saline or typically marine biomarkers above this coal is interpreted as evidence of very short periods of marine transgression, as there was not enough time for establishment of the precursor organisms for marine biomarkers. However, sufficient time passed to raise SO 4 2− concentration in pore waters, resulting in the formation of authigenic pyrite and sulphur incorparation into organic matter.

International Journal of Coal Geology↗

Ecological and evolutionary traps

Organisms often rely on environmental cues to make behavioral and life-history decisions. However, in environments that have been altered suddenly by humans, formerly reliable cues might no longer be associated with adaptive outcomes. In such cases, organisms can become 'trapped' by their evolutionary responses to the cues and experience reduced survival or reproduction. Ecological traps occur when organisms make poor habitat choices based on cues that correlated formerly with habitat quality. Ecological traps are part of a broader phenomenon, evolutionary traps, involving a dissociation between cues that organisms use to make any behavioral or life-history decision and outcomes normally associated with that decision. A trap can lead to extinction if a population falls below a critical size threshold before adaptation to the novel environment occurs. Conservation and management protocols must be designed in light of, rather than in spite of, the behavioral mechanisms and evolutionary history of populations and species to avoid 'trapping' them.

Trends in Ecology and Evolution↗

Flood plain and channel dynamics of the Quinault and Queets Rivers, Washington, USA

Comparison of historic channel migration rates, modern planform conditions, and overall sediment, wood, and flow conditions and interactions for the Quinault River and Queets River in the western Olympic Peninsula, Washington, reveals decadal- to century-scale interactions between gravel-bed channels and forested flood plains in temperate maritime environments. The downstream alluvial portions of these two rivers can be divided into three reaches of different slope, flow, sediment, and wood regimes: (i) the upper Quinault River is aggrading behind Lake Quinault, a natural lake that traps most sediment and wood transported from the Olympic Mountain headwaters. (ii) The lower Quinault River, downstream of Lake Quinault, transports only sediment and wood derived from reworking of flood-plain deposits and contributed from valley margins. (iii) The Queets River has unimpeded movement of sediment and water from the mountainous headwaters to the Pacific Ocean. Measurements of channel planform characteristics and historic migration rates and patterns show that these three reaches have correspondingly distinct channel and flood-plain morphologies and dynamics. The aggrading and sediment-rich upper Quinault River has the widest flood plain, widest active channel, greatest number of low-flow channels and flanking gravel bars, and an average channel migration rate of 12.7&plusmn;3.3 m/year between 1900 and 1994. The comparatively sediment-poor lower Quinault River has the narrowest flood plain, narrowest active channel, and lowest channel migration rate (4.0&plusmn;1.2 m/year); and most flow is through a single channel with few adjacent gravel bars. The Queets River has attributes intermediate between the lower and upper Quinault Rivers, including an average channel migration rate of 7.5&plusmn;2.9 m/year. Flood-plain turnover rates are similar for all three reaches, with channels eroding the flood plain at the rate of about 0.2% of the flood-plain area per year, and with corresponding flood-plain half-lives of 300 to 500 years. Observations from this study and previous studies on the Queets River show that channel and flood-plain dynamics and morphology are affected by interactions between flow, sediment, and standing and entrained wood, some of which likely involve time frames similar to 200&ndash;500-year flood-plain half-lives. On the upper Quinault River and Queets River, log jams promote bar growth and consequent channel shifting, short-distance avulsions, and meander cutoffs, resulting in mobile and wide active channels. On the lower Quinault River, large portions of the channel are stable and flow within vegetated flood plains. However, locally, channel-spanning log jams have caused channel avulsions within reaches that have been subsequently mobile for several decades. In all three reaches, log jams appear to be areas of conifer germination and growth that may later further influence channel and flood-plain conditions on long time scales by forming flood-plain areas resistant to channel migration and by providing key members of future log jams. Appreciation of these processes and dynamics and associated temporal and spatial scales is necessary to formulate effective long-term approaches to managing fluvial ecosystems in forested environments.

Geomorphology↗

The saturated zone at Yucca Mountain: An overview of the characterization and assessment of the saturated zone as a barrier to potential radionuclide migration

The US Department of Energy is pursuing Yucca Mountain, Nevada, for the development of a geologic repository for the disposal of spent nuclear fuel and high-level radioactive waste, if the repository is able to meet applicable radiation protection standards established by the US Nuclear Regulatory Commission and the US Environmental Protection Agency (EPA). Effective performance of such a repository would rely on a number of natural and engineered barriers to isolate radioactive waste from the accessible environment. Groundwater beneath Yucca Mountain is the primary medium through which most radionuclides might move away from the potential repository. The saturated zone (SZ) system is expected to act as a natural barrier to this possible movement of radionuclides both by delaying their transport and by reducing their concentration before they reach the accessible environment. Information obtained from Yucca Mountain Site Characterization Project activities is used to estimate groundwater flow rates through the site-scale SZ flow and transport model area and to constrain general conceptual models of groundwater flow in the site-scale area. The site-scale conceptual model is a synthesis of what is known about flow and transport processes at the scale required for total system performance assessment of the site. This knowledge builds on and is consistent with knowledge that has accumulated at the regional scale but is more detailed because more data are available at the site-scale level. The mathematical basis of the site-scale model and the associated numerical approaches are designed to assist in quantifying the uncertainty in the permeability of rocks in the geologic framework model and to represent accurately the flow and transport processes included in the site-scale conceptual model. Confidence in the results of the mathematical model was obtained by comparing calculated to observed hydraulic heads, estimated to measured permeabilities, and lateral flow rates calculated by the site-scale model to those calculated by the regional-scale flow model. In addition, it was confirmed that the flow paths leaving the region of the potential repository are consistent with those inferred from gradients of measured head and those independently inferred from water-chemistry data. The general approach of the site-scale SZ flow and transport model analysis is to calculate unit breakthrough curves for radionuclides at the interface between the SZ and the biosphere using the three-dimensional site-scale SZ flow and transport model. Uncertainties are explicitly incorporated into the site-scale SZ flow and transport abstractions through key parameters and conceptual models. ?? 2002 Elsevier Science B.V. All rights reserved.

Journal of Contaminant Hydrology↗

Temporal variations of natural and anthropogenic radionuclides in sea otter skull tissue in the North Pacific Ocean

Marine mammals being among the top predators in the food web tend to accumulate organic and inorganic contaminants from the environment. The body burden of contaminants in these species could reflect their foods and thus contaminant levels could serve as proxies on the changes of ecosystem. A pilot study was carried out to investigate the possibility of radionuclide leakage at Amchitka using a suite of sea otter ( Enhydra lutris ) skulls collected near Amchitka nuclear test-sites before (1950s) and after the testing (1990s), and at Adak, another Aleutian Island, about 300 km from Amchitka, where the potential impact of radionuclide leakage from Amchitka is expected to be negligible. In addition, the naturally occurring and anthropogenic radionuclide content on the sea otter skull was also utilized to investigate if there was any significant ecosystem changes in the environment. Concentration of 210 Pb in sea otter bones collected during the 1950s was significantly higher than those collected in the 1990s. We propose that among the various factors that could cause this higher enrichment in 210 Pb, changes in the sea otter prey is the most likely one. Comparison of the 137 Cs, 90 Sr, 239,240 Pu concentrations appear not to be significantly higher in sea otter skulls collected in 1990s from Amchitka where the underground tests in 1965–71 than those from Adak, although significant differences were detected among different groups collected at various times.

Journal of Environmental Radioactivity↗

Impacts of swine manure pits on groundwater quality

Manure deep-pits are commonly used to store manure at confined animal feeding operations. However, previous to this study little information had been collected on the impacts of deep-pits on groundwater quality to provide science-based guidance in formulating regulations and waste management strategies that address risks to human health and the environment. Groundwater quality has been monitored since January 1999 at two hog finishing facilities in Illinois that use deep-pit systems for manure storage. Groundwater samples were collected on a monthly basis and analyzed for inorganic and bacteriological constituent concentrations. The two sites are located in areas with geologic environments representing different vulnerabilities for local groundwater contamination. One site is underlain by more than 6 m of clayey silt, and 7-36 m of shale. Concentrations of chloride, ammonium, phosphate, and potassium indicated that local groundwater quality had not been significantly impacted by pit leakage from this facility. Nitrate concentrations were elevated near the pit, often exceeding the 10 mg N/l drinking water standard. Isotopic nitrate signatures suggested that the nitrate was likely derived from soil organic matter and fertilizer applied to adjacent crop fields. At the other site, sandstone is located 4.6-6.1 m below land surface. Chloride concentrations and ??15N and ??18O values of dissolved nitrate indicated that this facility may have limited and localized impacts on groundwater. Other constituents, including ammonia, potassium, phosphate, and sodium were generally at or less than background concentrations. Trace- and heavy-metal concentrations in groundwater samples collected from both facilities were at concentrations less than drinking water standards. The concentration of inorganic constituents in the groundwater would not likely impact human health. Fecal streptococcus bacteria were detected at least once in groundwater from all monitoring wells at both sites. Fecal streptococcus was more common and at greater concentrations than fecal coliform. The microbiological data suggest that filtration of bacteria by soils may not be as effective as commonly assumed. The presence of fecal bacteria in the shallow groundwater may pose a significant threat to human health if the ground water is used for drinking. Both facilities are less than 4 years old and the short-term impacts of these manure storage facilities on groundwater quality have been limited. Continued monitoring of these facilities will determine if they have a long-term impact on groundwater resources. ?? 2002 Elsevier Science Ltd. All rights reserved.

Environmental Pollution↗

Monitoring long-term effects of offshore oil and gas development along the Southern California outer continental shelf and slope: Background environmental conditions in the Santa Maria Basin

Potential environmental impacts of materials discharged from oil and gas development and production platforms off the coast of southern California (Santa Maria Basin) are being monitored during an ongoing, long-term (fiveyear) field program. The study combines hypothesis testing of platform effects with basic research on the structure and dynamics of the regional ecosystem over a time series encompassing both seasonal and repeated annual scales. Oceanographic features and processes that are being measured focus on the benthos and include biological community indices and species abundances for hard-bottom and soft-bottom (macroinfauna and meiofauna) assemblages; levels and distributions of trace metals and hydrocarbons in bottom sediments, suspended particulates, animal tissues, and pore waters; water currents and otherphysical-oceanographicfeatures; various sedimentological properties (sediment grain size, total organic carbon, shear strength, distribution of mineral types, radioisotope profiles, and degrees of sediment mixing as a result of bioturbation); sediment and pollutant-transport processes; and animal-sediment-pollutant interactions. Synoptic measurement of these different environmental variables over the extended sampling period provides an opportunity to examine long-term variability in the benthic environment with respect to both natural and anthropogenic causes. Efforts to distinguish between natural variability and low-level cumulative impacts of drilling are given special attention. Results obtained during the first two years of sampling provide a basis for beginning to understand environmental processes and relations important in detecting and interpreting any subsequent impacts caused by drilling activities in this complex and productive region of the California outer continental shelf and slope. Background chemical, physical, and biological data generated during this period demonstrate that impacts of discharges from oil and gas operations should be detectable, if they occur, and should be distinguishable from natural environmental variability. Small inputs of barium and petroleum hydrocarbons have been detected and appear to be associated with the minor drilling activities that have occurred in the area thus far, however, these initial inputs have not led to any noticeable biological impacts. These initial results are hopefully of value for two reasons: (1) in providing a summary of basic chemical, physical, and biological features of the benthic environment within the Santa Maria Basin; and (2) in presenting information on research strategies that should be considered in designing studies dealing with similar resource-management problems in other parts of the world.

California↗

Interparticle migration of metal cations in stream sediments as a factor in toxics transport

Sorption of metal cations by stream sediments is an important process affecting the movement of released contaminants in the environment. The ability of cations to desorb from one sediment particle and subsequently sorb to another can greatly affect metal transport rates but rates for this process have not been reported. The objective of this study was to determine the rate at which sorbed metals can migrate from contaminated sediment particles to uncontaminated sediment particles as a function of the concentration of the contaminating solution and the duration of the contact with the contaminating solution. Samples of small sediment particles were exposed to solutions containing cobalt, after which they were rinsed and combined with larger uncontaminated sediment particles in the presence of stream water. Initial concentrations of the contaminating solution ranged from 1ng/l to 1000mg/l and exposures to the contaminating solution ranged from 6h to 14 days. The rate of the migration increased with increasing concentrations in the contaminating solution and with decreasing times of exposure to the contaminating solution. Under the conditions of these experiments, the time required for the migration to reach equilibrium was on the order of months or longer. In separate experiments, the kinetics of adsorption and desorption of cobalt were measured as a function of concentration of the contaminating solution. The time required to reach adsorption equilibrium increased with increasing concentration in the contaminating solution. Times to sorption equilibrium were on the order of months. Desorption was much slower than adsorption and, together with intraparticle diffusion, probably controls the rate of migration from contaminated to uncontaminated sediment. The results of this study show that interparticle migration of metal cations can proceed at significant rates that are strongly influenced by the length of time that the metal has been in contact with the sediment. Copyright ?? 2001 Elsevier Science B.V.Sorption of metal cations by stream sediments is an important process affecting the movement of released contaminants in the environment. The ability of cations to desorb from one sediment particle and subsequently sorb to another can greatly affect metal transport rates but rates for this process have not been reported. The objective of this study was to determine the rate at which sorbed metals can migrate from contaminated sediment particles to uncontaminated sediment particles as a function of the concentration of the contaminating solution and the duration of the contact with the contaminating solution. Samples of small sediment particles were exposed to solutions containing cobalt, after which they were rinsed and combined with larger uncontaminated sediment particles in the presence of stream water. Initial concentrations of the contaminating solution ranged from 1 ng/l to 1000 mg/l and exposures to the contaminating solution ranged from 6 h to 14 days. The rate of the migration increased with increasing concentrations in the contaminating solution and with decreasing times of exposure to the contaminating solution. Under the conditions of these experiments, the time required for the migration to reach equilibrium was on the order of months or longer. In separate experiments, the kinetics of adsorption and desorption of cobalt were measured as a function of concentration of the contaminating solution. The time required to reach adsorption equilibrium increased with increasing concentration in the contaminating solution. Times to sorption equilibrium were on the order of months. Desorption was much slower than adsorption and, together with intraparticle diffusion, probably controls the rate of migration from contaminated to uncontaminated sediment. The results of this study show that interparticle migration of metal cations can proceed at significant rates that are strongly influenced by the length of time that the metal has

Journal of Hazardous Materials↗

Recovery and validation of historical sediment quality data from coastal and estuarine areas: An integrated approach

A comprehensive database of sediment chemistry and environmental parameters has been compiled for Boston Harbor and Massachusetts Bay. This work illustrates methodologies for rescuing and validating sediment data from heterogeneous historical sources. It greatly expands spatial and temporal data coverage of estuarine and coastal sediments. The database contains about 3500 samples containing inorganic chemical, organic, texture and other environmental data dating from 1955 to 1994. Cooperation with local and federal agencies as well as universities was essential in locating and screening documents for the database. More than 80% of references utilized came from sources with limited distribution (gray literature). Task sharing was facilitated by a comprehensive and clearly defined data dictionary for sediments. It also served as a data entry template and flat file format for data processing and as a basis for interpretation and graphical illustration. Standard QA/QC protocols are usually inapplicable to historical sediment data. In this work outliers and data quality problems were identified by batch screening techniques that also provide visualizations of data relationships and geochemical affinities. No data were excluded, but qualifying comments warn users of problem data. For Boston Harbor, the proportion of irreparable or seriously questioned data was remarkably small (<5%), although concentration values for metals and organic contaminants spanned 3 orders of magnitude for many elements or compounds. Data from the historical database provide alternatives to dated cores for measuring changes in surficial sediment contamination level with time. The data indicate that spatial inhomogeneity in harbor environments can be large with respect to sediment-hosted contaminants. Boston Inner Harbor surficial sediments showed decreases in concentrations of Cu, Hg, and Zn of 40 to 60% over a 17-year period.A comprehensive database of sediment chemistry and environmental parameters has been compiled for Boston Harbor and Massachusetts Bay. This work illustrates methodologies for rescuing and validating sediment data from heterogeneous historical sources. It greatly expands spatial and temporal data coverage of estuarine and coastal sediments. The database contains about 3500 samples containing inorganic chemical, organic, texture and other environmental data dating from 1995 to 1994. Cooperation with local and federal agencies as well as universities was essential in locating and screening documents for the database. More than 80% of references utilized came from sources with limited distribution (gray Task sharing was facilitated by a comprehensive and clearly defined data dictionary for sediments. It also served as a data entry template and flat file format for data processing and as a basis for interpretation and graphical illustration. Standard QA/QC protocols are usually inapplicable to historical sediment data. In this work outliers and data quality problems were identified by batch screening techniques that also provide visualizations of data relationships and geochemical affinities. No data were excluded, but qualifying comments warn users of problem data. For Boston Harbor, the proportion of irreparable or seriously questioned data was remarkably small (<5%), although concentration values for metals and organic contaminants spanned 3 orders of magnitude for many elements or compounds. Data from the historical database provide alternatives to dated cores for measuring changes in surficial sediment contamination level with time. The data indicate that spatial inhomogeneity in harbor environments can be large with respect to sediment-hosted contaminants. Boston Inner Harbor surficial sediments showed decreases in concentrations Cu, Hg, and Zn of 40 to 60% over a 17-year period.

Massachusetts↗

Environmental fate and effects of the lampricide Bayluscide: A review

Bayluscide is an additive to TFM that increases the effectiveness of TFM as a lampricide. A review of the literature was undertaken to determine the environmental fate and effects of Bayluscide. Niclosamide (2′, 5-dichloro-4′-nitrosalicylanilide), the active ingredient of Bayluscide, degrades rapidly in natural water and sediment systems, however, the rate of degradation is very slow in autoclaved samples. This difference suggests that degradation under laboratory conditions is dependent on microbial activity and hydrolysis plays a minor role in degradation of niclosamide. The major degradation product of niclosamide has been reported to be aminoniclosamide (2′,5-dichloro-4′-aminosalicylanilide), which represented more than 50% of the residues extractable from sediments. Significantly more of the chemical is adsorbed to sediments with higher organic content and at lower pH's. The mobility of niclosamide in soil can be characterized as slight to medium; the estimated leaching distance would range from 0 to > 25 cm depending on the soil type and pH. The active ingredient of Bayluscide (niclosamide) is decomposed by ultra-violet light depending on the intensity and duration of the exposure. The uptake of residues by most invertebrates exposed to 14 C-niclosamide is fairly rapid and equilibrium is reached within 24 h. About 90% of the accumulated residues were lost within 48 h after the organisms were transferred to clean flowing water. As with invertebrates, fish rapidly accumulate and eliminate residues of niclosamide. Three distinct residues were isolated from the extracts of edible fillet tissue; parent niclosamide, the glucuronide conjugate of niclosamide, and the sulfate ester of niclosamide. Aquatic plants and agricultural crops do not appear to be adversely affected at concentrations of Bayluscide used for lamprey or snail control. Mayflies ( Hexagenia sp .). tend to be susceptible to TFM, but are relatively resistant to the effects of exposure to Bayluscide. Bayluscide was originally developed as a molluscicide to eliminate snails. Therefore, it is not surprising that mollusks are extremely sensitive to Bayluscide. Oral, dermal, and ocular administration of Bayluscide to mammals resulted in no clinical signs of systemic toxicity. Tests of the chronic effects of Bayluscide indicated that it is not mutagenic or carcinogenic. Bayluscide is not persistent in the environment; it breaks down in natural water and sediment systems through hydrolysis, photolysis, and microbial degradation. Given the limited use and tight control maintained by the U.S. Fish and Wildlife Service during applications of lampricides, Bayluscide presents minimal risk to human health and safety of the environment.

Conference Paper↗

Nearshore versus offshore copper loading in Lake Superior sediments: Implications for transport and cycling

A thorough understanding of the fate and transport of metals in Lake Superior is necessary in order to predict the ability of Lake Superior to recover from anthropogenic perturbations (copper mining). Sediment cores were collected from nearshore and offshore sites in Lake Superior and used to evaluate spatial and temporal variations in copper loading associated with mining-related activities. Although both settings have been strongly affected by anthropogenic releases of copper, copper concentrations in nearshore cores are significantly greater than those found in offshore cores, implying that nearshore copper loading is dominated by simple deposition and burial of sediment generated from mining activities. Temporal variations in copper profiles in sediments from nearshore environments closelymimic copper production rates. Conversely, copper loading histories derived from offshore sediments are not well correlated to production rates. The offshore sediment cores, when compared with analogous cores from Lakes Ontario and Michigan, show that the average, lake-wide intensity of copper loading in Lake Superior is comparable to the other two lakes, despite the fact that Lake Superior has received the largest total burden of anthropogenic copper. Cu/Zn ratios, used to evaluate the amount of copper loading derived from mining discharges, vary strongly in nearshore environments in response to loading. Cu/Zn ratios in offshore sediments are much less variable, implying that copper loading may be regulated by additional mechanisms (solution chemistry and/or biologic uptake). Study of trace metal partitioning within Lake Superior sediments indicates that the organic fraction of the sediment contains the majority of the copper. Copper concentrations in offshore sediments are significantly correlated to organic carbon content of the sediment whereas copper concentrations in nearshore sediments are not. These findings support the model that transport and deposition of particles released from mining discharges dominate copper loading in nearshore sediments, whereas biologic uptake and settling of particulate organic matter may regulate copper loading in offshore sediments.

Journal of Great Lakes Research↗

Environmental geochemistry at the global scale

Land degradation and pollution caused by population pressure and economic development pose a threat to the sustainability of the earth's surface, especially in tropical regions where a long history of chemical weathering has made the surface environment particularly fragile. Systematic baseline geochemical data provide a means of monitoring the state of the environment and identifying problem areas. Regional surveys have already been carried out in some countries, and with increased national and international funding they can be extended to cover the rest of the land surface of the globe. Preparations have been made, under the auspices of the International Union of Geological Surveys (IUGS) and the International Association of Geochemistry and Cosmochemistry (IAGC) for the establishment of just such an integrated global database. ?? 2001 NERC. Published by Elsevier Science Ltd.

Conference Paper↗

A passive integrative sampler for mercury vapor in air and neutral mercury species in water

A passive integrative mercury sampler (PIMS) based on a sealed polymeric membrane was effective for the collection and preconcentration of Hg0. Because the Hg is both oxidized and stabilized in the PIMS, sampling intervals of weeks to months are possible. The effective air sampling rate for a 15 x 2.5 cm device was about 21-equivalents/day (0.002 m3/day) and the detection limit for 4-week sampling was about 2 ng/m3 for conventional ICP-MS determination without clean-room preparation. Sampling precision was ??? 5% RSD for laboratory exposures, and 5-10% RSD for field exposures. These results suggest that the PIMS could be useful for screening assessments of Hg contamination and exposure in the environment, the laboratory, and the workplace. The PIMS approach may be particularly useful for applications requiring unattended sampling for extended periods at remote locations. Preliminary results indicate that sampling for dissolved gaseous mercury (DGM) and potentially other neutral mercury species from water is also feasible. Rigorous validation of the sampler performance is currently in progress. (C) 1999 Elsevier Science Ltd.A passive integrative mercury sampler (PIMS) based on a sealed polymeric membrane was effective for the collection and preconcentration of Hg0. Because the Hg is both oxidized and stabilized in the PIMS, sampling intervals of weeks to months are possible. The effective air sampling rate for a 15??2.5 cm device was about 21-equivalents/day (0.002 m3/day) and the detection limit for 4-week sampling was about 2 ng/m3 for conventional ICP-MS determination without clean-room preparation. Sampling precision was ???5% RSD for laboratory exposures, and 5-10% RSD for field exposures. These results suggest that the PIMS could be useful for screening assessments of Hg contamination and exposure in the environment, the laboratory, and the workplace. The PIMS approach may be particularly useful for applications requiring unattended sampling for extended periods at remote locations. Preliminary results indicate that sampling for dissolved gaseous mercury (DGM) and potentially other neutral mercury species from water is also feasible. Rigorous validation of the sampler performance is currently in progress.

Chemosphere - Global Change Science↗