USGS Science⌕ Search

SEARCH · USGS Science

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96Linked to original sources
USGS2016

Nature, distribution, and origin of Titan’s Undifferentiated Plains

The Undifferentiated Plains on Titan, first mapped by Lopes et al. (Lopes, R.M.C. et al., 2010. Icarus, 205, 540–588), are vast expanses of terrains that appear radar-dark and fairly uniform in Cassini Synthetic Aperture Radar (SAR) images. As a result, these terrains are often referred to as “blandlands”. While the interpretation of several other geologic units on Titan – such as dunes, lakes, and well-preserved impact craters – has been relatively straightforward, the origin of the Undifferentiated Plains has remained elusive. SAR images show that these “blandlands” are mostly found at mid-latitudes and appear relatively featureless at radar wavelengths, with no major topographic features. Their gradational boundaries and paucity of recognizable features in SAR data make geologic interpretation particularly challenging. We have mapped the distribution of these terrains using SAR swaths up to flyby T92 (July 2013), which cover >50% of Titan’s surface. We compared SAR images with other data sets where available, including topography derived from the SARTopo method and stereo DEMs, the response from RADAR radiometry, hyperspectral imaging data from Cassini’s Visual and Infrared Mapping Spectrometer (VIMS), and near infrared imaging from the Imaging Science Subsystem (ISS). We examined and evaluated different formation mechanisms, including (i) cryovolcanic origin, consisting of overlapping flows of low relief or (ii) sedimentary origins, resulting from fluvial/lacustrine or aeolian deposition, or accumulation of photolysis products created in the atmosphere. Our analysis indicates that the Undifferentiated Plains unit is consistent with a composition predominantly containing organic rather than icy materials and formed by depositional and/or sedimentary processes. We conclude that aeolian processes played a major part in the formation of the Undifferentiated Plains; however, other processes (fluvial, deposition of photolysis products) are likely to have contributed, possibly in differing proportions depending on location.

Icarus↗
USGS1996

Drilling, construction, and caliper-log data for wells 3-3406-14 and -15, Helemano exploratory wells I and II, Oahu, Hawaii

The Helemano exploratory wells I and II (State well numbers 3-3406-14 and -15) were drilled near Weed Circle, about 3,000 feet south of the town of Haleiwa. The wells are located on agricultural land in the Waialua ground-water area. The wells penetrate through sedimentary deposits (caprock) and into a basalt aquifer. Both wells have short open intervals cased with well screen at the bottom of the hole, and are cased and sealed through the caprock and basalt to the well screen. The shallow well, Helemano exploratory well I, penetrates about 10 feet into the basalt aquifer below the contact of the caprock and basalt. The deep well, Helemano exploratory well II, penetrates about 210 feet into the basalt aquifer. The deep well has a 20-foot open interval at the bottom. Well construction data, logs of drilling notes, geologic descriptions for drill samples, and caliper-log data are presented for the wells. The wells are two of twelve exploratory wells drilled in the north-central Oahu area between July 1993 and May 1994 in cooperation with the Honolulu Board of Water Supply.

Open-File Report↗
USGS2013

Hydrogeology and hydrologic conditions of the Northern Atlantic Coastal Plain aquifer System from Long Island, New York, to North Carolina

The seaward-dipping sedimentary wedge that underlies the Northern Atlantic Coastal Plain forms a complex groundwater system. This major source of water provides for public and domestic supply and serves as a vital source of freshwater for industrial and agricultural uses throughout the region. Population increases and land-use and climate changes, however, have led to competing demands for water. The regional response of the aquifer system to these stresses poses regional challenges for water-resources management at the State level because hydrologic effects often extend beyond State boundaries. In response to these challenges, the U.S. Geological Survey Groundwater Resources Program began a regional assessment of the groundwater availability of the Northern Atlantic Coastal Plain aquifer system in 2010. The initial phase of this investigation included a refinement of the hydrogeologic framework and an updated hydrologic budget of this aquifer system from the last regional aquifer system assessment completed by the U.S. Geological Survey in the 1980s. Refinements to the hydrogeologic framework include revision of the regional aquifer names to be more consistent with local names in New York, New Jersey, Delaware, Maryland, and Virginia, the primary States included in the study area. Other revisions to the framework include characterization of the aquifers of the regional Potomac aquifer system. The regional Potomac aquifer system is subdivided for this report into two regional aquifers. These aquifers include the single Potomac aquifer in Virginia and two aquifers in Maryland, Delaware, and New Jersey, where the Potomac aquifer system thickens within the Salisbury Embayment. The two regional aquifers making up the Potomac aquifer system include the Potomac-Patapsco aquifer and the underlying Potomac-Patuxent aquifer. The Potomac-Patuxent aquifer includes the Lower Potomac-Raritan-Magothy aquifer in southern New Jersey and the Patuxent aquifers in Delaware and Maryland. In northern New Jersey and on Long Island, New York, the PotomacPatuxent aquifer is absent, but the Late Cretaceous fluvialdeltaic aquifer that is laterally equivalent with the upper part of the Potomac Formation now is considered part of the regional Potomac-Patapsco aquifer. This aquifer includes the Middle Potomac-Raritan-Magothy aquifer in New Jersey and the Lloyd aquifer on Long Island. The name “Upper Potomac aquifer” has been removed as part of this regional framework revision. The local aquifer previously considered part of the Upper Potomac aquifer now are part of the regional Magothy aquifer. These units include the Upper Potomac-Raritan-Magothy aquifer in New Jersey, the Magothy aquifers on Long Island, Delaware, and Maryland, and the Virginia Beach aquifer in Virginia. Updates to the regional hydrologic budget include revised estimates of aquifer recharge, water use and streamflow data. Inflow to the aquifer system of about 20,000 million gallons per day (Mgal/d) includes 19,600 Mgal/d from recharge from precipitation, 200 Mgal/d of recharge from wastewater via onsite domestic septic systems, and 200 Mgal/d from the release of water from aquifer storage. Outflow from the aquifer system includes groundwater discharge to streams (11,900 Mgal/d), groundwater withdrawals (1,500 Mgal/d), and groundwater discharge to coastal waters (6,600 Mgal/d). A numerical modeling analysis is required to improve this hydrologic budget calculation and to forecast future changes in water levels and aquifer storage caused by groundwater withdrawals, land-use changes, and the effects of climate variability and change.

Delaware, Maryland, New Jersey, New York, North Ca↗
USGS1969

Geology and regional metamorphism of some high-grade cordierite gneisses, Front Range, Colorado

Cordierite is common in regional metamorphic gneisses of Precambrian age in the central part of the Front Range. It occurs in discontinuous stratigraphic units that are structurally a minor component, except locally, of the thick succession of biotite gneisses that comprise the widespread Idaho Springs Formation. The rocks have mineral assemblages, that are characteristic of the sillimanite grade of metamorphism. The cordierite occurs in three principal rock types: (1) potassic feldspar-bearing cordierite-garnet-sillimanite-biotite gneiss, (2) cordierite-biotite gneiss, and (3) cordierite-gedrite-biotite gneiss; each type contains several characteristic mineral assemblages. The rock types are gradational and overlap in areal distribution, and mainly owe their diversity in mineralogy to differences in bulk chemical composition. The field relations are consistent with an interpretation that the diverse cordierite rocks were derived from original sedimentary rocks, largely pelitic sediments. The potassic feldspar-bearing cordierite-garnet gneisses were formed from shales that contained more MgO and FeO than the more abundant sedimentary facies that yielded sillimanitic biotite gneisses. Cordierite-gedrite-biotite gneisses contain much aluminum, iron, and magnesium and little sodium and potassium as compared to the other biotite gneisses; they have an extremely low content of minor elements. Although their chemical compositions are unlike those of known modern sediments, the cordierite-gedrite gneisses are considered also to have been derived from sedimentary rocks. The physical properties and chemical compositions of the mineral phases vary somewhat from one rock type to another. Biotite varies systematically in composition, and the changes are closely related to rock type and thus to bulk composition; the MgO/FeO ratios range from 1.7 in the more mafic cordierite-gedrite rocks to 0.49 in potassic feldspar-bearing cordierite-garnet gneisses. Cordierite is magnesium-rich and intermediate in the range of composition of all analyzed cordierites (Leake, 1960); its MgO/FeO ratio is higher in the gedrite-bearing gneisses than in the potassic feldspar-bearing gneisses. The garnets consist dominantly of the almandine and pyrope molecules, and range from 64 to 75 percent almandine and from 14 to 27 pyrope. These crystals are zoned; their rims are slightly more ferrous and less magnesian than their cores. Both monoclinic and triclinic alkali feldspars coexist in the potassic feldspar-bearing cordierite-garnet gneisses. The potassic feldspars contain from 18 to 27 weight percent NaAlSi 3 O 8 . Plagioclase (oligoclase-andesine) is uncommon in the rocks. Gedrite has an MgO/FeO ratio ranging from 1 to 1.2. Associated minor minerals include iron oxides, andalusite, spinel and its alteration product högbomite, and corundum. The mineral assemblages can be correlated imperfectly with episodes of deformation and metamorphism. Relict staurolite and associated garnet occur locally as remnants of an assemblage formed early in regional metamorphism, presumably early in the first period of deformation. The dominant assemblage biotite-cordierite-garnet-magnetite-plagioclase-potassic feldspar-quartz-sillimanite and associated assemblages having fewer phases, were formed during period one and period two deformations, the principal episodes of regional dynamothermal metamorphism in the central part of the Front Range. A minor assemblage andalusite-biotite-magnetite-plagioclase-quartz was formed later, possibly coincident with a third period of deformation, largely cataclastic in effects, which was more local than the earlier deformations and metamorphism. Phase equilibria studies of the assemblage biotite-cordierite-garnet-magnetite-plagioclase-potassic feldspar-quartz-sillimanite and associated assemblages are interpreted to indicate that the cordierite assemblages approach a state of chemical equilibrium. The scatter of points in a distribution diagram can be interpreted in terms of at least two sets of equilibrium conditions that prevailed during the major plastic deformations. Other discrepancies indicating departure from a homogeneous equilibrium can be explained as a result of mosaic equilibrium involving limited diffusion of iron and magnesium for short distances. The mineral assemblages and the compositions of the ferromagnesian minerals in the cordierite rocks of this region are dependent primarily on the bulk composition of the rocks and variations in the mineral species that comprise the rocks and, to a lesser degree, on the grade of metamorphism. Biotite and cordierite are markedly more magnesian in the more mafic cordierite-gedrite-biotite gneiss than in the potassic feldspar-bearing cordierite-garnet-sillimanite-biotite gneiss. Associated microcline gneiss and biotite-sillimanite gneiss that contains muscovite as a primary stable mineral provides a means to define the metamorphic grade in the area of study. It is concluded from analyses of the assemblages with respect to theoretical phase relations in the system SiO 2 -Al 2 O 3 -Na 2 O-K 2 O-H 2 O that at least some of the rocks in the Central City-Nederland area are above the sillimanite-potassic feldspar isograd as defined by Evans and Guidotti (1966). In rocks of appropriate composition, muscovite is a stable phase in assemblages containing potassic feldspar and sillimanite. The cordierite assemblages and associated rocks are inferred to have formed in an environment having a load pressure of 3–5 kilobars (fluid pressure equaled load pressure) and a temperature somewhat in excess of 620° C.

Colorado↗
USGS1995

Alteration of basalt hyaloclastite at the off-axis Sea Cliff hydrothermal field, Gorda Ridge

The Sea Cliff hydrothermal field on the northern segment of the Gorda Ridge is situated along a rift-bounding normal fault about 2.6 km east of the neovolcanic zone and approximately 300 m above the spreading axis. The structural setting of this hydrothermal field differs from that of most other active seafloor hydrothermal sites investigated to date, which are typically situated in the neovolcanic zone. Mineralization occurs in basaltic talus covering a large normal-fault scarp. Hydrothermal crusts cover much of the seafloor in the area of the active hydrothermal field. These crusts form by extensive alteration of basaltic hyaloclastite in a zone of mixing between ascending hydrothermal fluid and entrained seawater. The initial stage of alteration is magnesian metasomatism of both crystalline basalt and basaltic glass, converting the rock to Mg-rich smectite and smectite/chlorite. Further alteration removes nearly all cations and ultimately leads to silicification. Preservation of basaltic texture in the silicified rocks provides evidence that even such sparingly soluble elements as A1 and Ti have been removed. Oxygen-isotopic ratios of the altered rocks constrain initial alteration to temperatures near 220°C, close to the maximum measured vent temperatures of 247°C. Silicification proceeded to much lower temperatures, and most amorphous silica deposition occurred at temperatures below 100°C. Sulfur-, strontium-, and lead-isotopic data all indicate a predominantly basaltic source, with important contributions from seawater but no significant contribution from sedimentary sources. Comparison with ophiolite-hosted massive sulfide deposits shows that the structural setting, alteration sequence, and depositional environment are all similar and suggests that mineralization and replacement of basaltic breccia in the Sea Cliff hydrothermal field likely occur in the subsurface beneath a capping layer of silicified hyaloclastite.

California, Oregon↗
USGS1994

Third-order Middle Miocene-Early Pliocene depositional sequences in the prograding delta complex of the Pannonian Basin

Few studies exist in the geologic literature that show the distribution of seismic facies and depositional sequences within a lacustrine basin. The Pannonian Basin of Central Europe offers a unique opportunity to evaluate the influence of the eustatic signal on lacustrine deposition. Seismic stratigraphie and sedimentological studies indicate that the Middle Miocene-Early Pliocene infill of the transtensional Pannonian Basin was formed by large delta systems. Systematic sequence stratigraphie analysis of 6000 km of reflection seismic data and more than 100 hydrocarbon exploration wells in Hungary allowed the identification of twelve third-order sequence boundaries in the late Neogene sedimentary fill. This number of depositional sequences corresponds to that of the published global eustatic curve for this time period. Furthermore, based on magnetostratigraphic and radiometric data, the ages of these depositional sequences can be tentatively correlated with the global eustatic curve. The Pannonian Basin became isolated from the world sea at the Sarmatian/Pannonian (11.5 Ma) boundary and formed a large lake. The stratal patterns and sedimentary facies of individual systems tracts within the lacustrine sequences display the same characteristics as marine depositional sequences. The relatively low rate of thermal subsidence and the high rate of sediment supply resulted in a good sequence resolution. Within the third-order sequences higher-order sequences can be recognized with an average duration of about 0.1-0.5 Ma.

Tectonophysics↗
USGS1973

Aeromagnetic discovery of a Baltimore Gneiss dome in the Piedmont of northwestern Delaware and southeastern Pennsylvania

In the central Appalachian Piedmont the “basement complex” is an assemblage of 1,100- to 1,300-m.y.-old gneisses, migmatites, and amphibolites that crops out in “domes” mantled by younger meta-sedimentary rocks of the Glenarm Series. Aeromagnetic data and reconnaissance field work indicate that a previously unknown Baltimore Gneiss dome, here called the Mill Creek dome, is present in southeastern Pennsylvania and northwestern Delaware. The discovery of previously unknown domes of Baltimore Gneiss has bearing on the thickness, structure, and regional relations of the Glenarm Series.

Delaware, Pennsylvania↗
USGS1994

Geologic map of the MTM -85080 quadrangle (revised), Planum Australe region of Mars

Published geologic maps of south polar region of Mars have been based on either Mariner 9 (Condit Soderblom, 1978; Scott and Carr, 1978) or Viking Orbiter (Tanaka and Scott, 1987) images. The mapped extent of the southern layered deposits differs in many places on these maps and on our maps. These differences reflect the difficulty in accurately determining the location of the contact between the layered deposits and subjacent units. The polar layered deposit gradually thin toward their margin in many places, and the smooth surface features that characterize the layered deposits are also found on other sedimentary blankets in the south polar region (Murray and others, 1972; Sharp, 1973). Previous workers have also reached different conclusions regarding the origin of the lower member of the Dorsa Argentea Formation, which was named by Tanaka and Scott (1987) and interpreted by them as volcanic in origin (based on observation of flow fronts in areas far outside this quadrangle). The lower member, previously called pitted material, and other sedimentary, and other sedimentary units were recognized in Mariner 9 images and described by Murray and others (1972), Sharp (1973), and Cutts (1973b). Sharp (1973) argued for exhumation of pits by wind, perhaps aided by sublimation of volatiles. He concluded that the massive pitted sediments of the lower member unconformably overlie older massive units. We have mapped one of these older units ridged and knobby material. Condit and Soderblom (1978) found some layered deposits within pits, which indicates that erosion of the pits was completed before accumulation of the layered deposits commenced. Howard’s (1981) suggestion that the pits may be formed by basal melting of ground ice is consistent with either a volcanic or sedimentary origin for the lower (pitted) member. Plaut and others (1988) mapped the extent of the pitted material and found that it overlies volcanic plains wherever the contact is visible. They concluded that the pitted material is no more than 1 km thick and is about 3.3 billion years old (Late Hesperian).

IMAP↗
USGS2002

Vitrinite reflectance data for the Greater Green River basin, southwestern Wyoming, northwestern Colorado, and northeastern Utah

The Greater Green River Basin is a large Laramide (Late Cretaceous through Eocene) structural and sedimentary basin that encompasses about 25,000 square miles in southwestern Wyoming, northwestern Colorado, and northeastern Utah (fig. 1). Important conventional oil and gas resources have been discovered and produced from reservoirs ranging in age from Cambrian through Tertiary (Law, 1996). In addition, an extensive overpressured basin - centered gas accumulation has also been identified in Cretaceous and Tertiary reservoirs by numerous researchers including Law (1984a, 1996), Law and others (1980, 1989), McPeek (1981), and Spencer (1987). The purpose of this report is to present new vitrinite reflectance data to be used in support of the U.S Geological Survey assessment of undiscovered oil and gas resources of the Greater Green River Basin. One hundred eighty-six samples were collected from Cretaceous and Tertiary coalbearing strata (figs. 1 and 2) in an effort to better understand and characterize the thermal maturation and burial history of potential source rocks. Two samples were from core, one from outcrop, and the remainder from well cuttings. These data were collected to supplement previously published data by Law (1984b), Pawlewicz and others (1986), Merewether and others (1987), and Garcia-Gonzalez and Surdam (1995) and are presented in table 1.

Colorado, Utah, Wyoming↗
USGS2007

Ground-Water Quality and Potential Effects of Individual Sewage Disposal System Effluent on Ground-Water Quality in Park County, Colorado, 2001-2004

In 2000, the U.S. Geological Survey, in cooperation with Park County, Colorado, began a study to evaluate ground-water quality in the various aquifers in Park County that supply water to domestic wells. The focus of this study was to identify and describe the principal natural and human factors that affect ground-water quality. In addition, the potential effects of individual sewage disposal system (ISDS) effluent on ground-water quality were evaluated. Ground-water samples were collected from domestic water-supply wells from July 2001 through October 2004 in the alluvial, crystalline-rock, sedimentary-rock, and volcanic-rock aquifers to assess general ground-water quality and effects of ISDS's on ground-water quality throughout Park County. Samples were analyzed for physical properties, major ions, nutrients, bacteria, and boron; and selected samples also were analyzed for dissolved organic carbon, human-related (wastewater) compounds, trace elements, radionuclides, and age-dating constituents (tritium and chlorofluorocarbons). Drinking-water quality is adequate for domestic use throughout Park County with a few exceptions. Only about 3 percent of wells had concentrations of fluoride, nitrate, and (or) uranium that exceeded U.S. Environmental Protection Agency national, primary drinking-water standards. These primary drinking-water standards were exceeded only in wells completed in the crystalline-rock aquifers in eastern Park County. Escherichia coli bacteria were detected in one well near Guffey, and total coliform bacteria were detected in about 11 percent of wells sampled throughout the county. The highest total coliform concentrations were measured southeast of the city of Jefferson and west of Tarryall Reservoir. Secondary drinking-water standards were exceeded more frequently. About 19 percent of wells had concentrations of one or more constituents (pH, chloride, fluoride, sulfate, and dissolved solids) that exceeded secondary drinking-water standards. Currently (2004), there is no federally enforced drinking-water standard for radon in public water-supply systems, but proposed regulations suggest a maximum contaminant level of 300 picocuries per liter (pCi/L) and an alternative maximum contaminant level of 4,000 pCi/L contingent on other mitigating remedial activities to reduce radon levels in indoor air. Radon concentrations in about 91 percent of ground-water samples were greater than or equal to 300 pCi/L, and about 25 percent had radon concentrations greater than or equal to 4,000 pCi/L. Generally, the highest radon concentrations were measured in samples collected from wells completed in the crystalline-rock aquifers. Analyses of ground-water-quality data indicate that recharge from ISDS effluent has affected some local ground-water systems in Park County. Because roughly 90 percent of domestic water used is assumed to be recharged by ISDS's, detections of human-related (wastewater) compounds in ground water in Park County are not surprising; however, concentrations of constituents associated with ISDS effluent generally are low (concentrations near the laboratory reporting levels). Thirty-eight different organic wastewater compounds were detected in 46 percent of ground-water samples, and the number of compounds detected per sample ranged from 1 to 17 compounds. Samples collected from wells with detections of wastewater compounds also had significantly higher (p-value < 0.05) chloride and boron concentrations than samples from wells with no detections of wastewater compounds. ISDS density (average subdivision lot size used to estimate ISDS density) was related to ground-water quality in Park County. Chloride and boron concentrations were significantly higher in ground-water samples collected from wells located in areas that had average subdivision lot sizes of less than 1 acre than in areas that had average subdivision lot sizes greater than or equal to 1 acre. For wells completed in the crystalline-

Scientific Investigations Report↗
USGS2017

Estimation of the groundwater resources of the bedrock aquifers at the Kettle Moraine Springs State Fish Hatchery, Sheboygan County, Wisconsin

Groundwater resources information was needed to understand regional aquifer systems and water available to wells and springs for rearing important Lake Michigan fish species at the Kettle Moraine Springs State Fish Hatchery in Sheboygan County, Wisconsin. As a basis for estimating the groundwater resources available, an existing groundwater-flow model was refined, and new groundwater-flow models were developed for the Kettle Moraine Springs State Fish Hatchery area using the U.S. Geological Survey (USGS) finite-difference code MODFLOW. This report describes the origin and construction of these groundwater-flow models and their use in testing conceptual models and simulating the hydrogeologic system. The study area is in the Eastern Ridges and Lowlands geographical province of Wisconsin, and the hatchery property is situated on the southeastern edge of the Kettle Moraine, a north-south trending topographic high of glacial origin. The bedrock units underlying the study area consist of Cambrian, Ordovician, and Silurian units of carbonate and siliciclastic lithology. In the Sheboygan County area, the sedimentary bedrock sequence reaches a thickness of as much as about 1,600 feet (ft). Two aquifer systems are present at the Kettle Moraine Springs State Fish Hatchery. A shallow system is made up of Silurian bedrock, consisting chiefly of dolomite, overlain by unconsolidated Quaternary-age glacial deposits. The glacial deposits of this aquifer system are the typical source of water to local springs, including the springs that have historically supplied the hatchery. The shallow aquifer system, therefore, consists of the unconsolidated glacial aquifer and the underlying bedrock Silurian aquifer. Most residential wells in the area draw from the Silurian aquifer. A deeper confined aquifer system is made up of Cambrian- and Ordovician-age bedrock units including sandstone formations. Because of its depth, very few wells are completed in the Cambrian-Ordovician aquifer system (COAS) near the Kettle Moraine Springs State Fish Hatchery. Three groundwater-flow models were used to estimate the water resources available to the hatchery from bedrock aquifers under selected scenarios of well placement and seasonal water requirements and subject to constraints on the effects of pumping on neighboring wells, local springs, and creeks. Model input data (recharge, water withdrawal, and boundary conditions) for these models were compiled from a number of data and information sources. The first model, named the “KMS model,” (KMS stands for Kettle Moraine Springs) is an inset model derived from a published USGS regional Lake Michigan Basin model and was constructed to simulate groundwater pumping from the semiconfined Silurian aquifer. The second model, named the “Pumping Test model,” was constructed to evaluate an aquifer pumping test conducted in the COAS as part of this project. The Pumping Test model was also used to simulate the local effects of 20 years of groundwater pumping from this deep bedrock aquifer for future hatchery operations. The third model, named the “LMB modified model,” is a version of the published Lake Michigan Basin (LMB) model that was modified with aquifer parameters refined in an area around the hatchery (approximately a 5-mile radius circle, corresponding to the area stressed by the aquifer pumping test). This LMB modified model was applied to evaluate regional effects of pumping from the confined COAS. The available Silurian aquifer groundwater resource was estimated using the KMS model with three scenarios—named “AllConstraints,” “Constraints2,” and “Constraints3”—that specified local water-level and flow constraints such as drawdown at nearby household wells, water levels inside pumping well boreholes, and flow in local streams and springs. Each scenario utilized the MODFLOW Groundwater Management Process (GWM) to select three locations from six candidate locations that provided the greatest combined flow while satisfying the constraints. The three constraint scenarios provided estimates of 430 gallons per minute (gal/min), 480 gal/min, and 520 gal/min pumping from three wells—AllConstraints, Constraints2, and Constraints3, respectively. The same three wells were selected for the scenarios that estimated 480 gal/min and 520 gal/min; the scenario that estimated 430 gal/min shared two of these same wells, but the third selected well was different. The available COAS groundwater resource was estimated by two scenarios with each conducted over a period of 20 years with the Pumping Test model and the LMB modified model . The Pumping Test model was used to simulate local effects of pumping, and the LMB modified model was used to simulate regional effects of pumping. The scenarios simulate a range of total and seasonal pumping rates potentially linked to site activities. Scenario 1 simulates two wells completed in the Cambrian-Ordovician aquifer system, each pumping for 8 months at 300 gal/min, followed by pumping for 4 months at 600 gal/min. The average yearly pumping rate of Scenario 1 is 800 gal/min. Scenario 2 simulates three wells completed in the Cambrian-Ordovician aquifer system pumping for 8 months at 200 gal/min, followed by pumping for 4 months at 500 gal/min. The average yearly pumping rate of Scenario 2 is 900 gal/min. The Pumping Test model simulations confirmed that drawdown in the boreholes of the pumping wells at the selected 2-well or 3-well rates will meet the desired condition that the pumping water level remains at least 100 ft above the highest Cambrian-Ordovician unit open to the well. The LMB modified model was used to evaluate the regional drawdown of the pumping from the confined COAS under the same 2-well and 3-well scenarios. At the nearest known existing COAS well, Campbellsport production well #4, the simulated drawdown for Scenario 1 after 20 years of cyclical pumping with two pumping wells averaging a total of 800 gal/min is 16.9 ft, whereas the simulated drawdown for Scenario 2 after 20 years of pumping with three pumping wells averaging a total of 900 gal/min is 19.0 ft. The total deep aquifer thickness at the Campbellsport location is on the order of 620 ft, meaning that the simulated drawdown for either scenario is about 3 percent of the confined aquifer thickness. The models developed as part of this project are archived in the project data release. The archive includes the model input and output files as well as MODFLOW source code and executables. ( Haserodt and others, 2017 ).

Wisconsin↗
USGS2002

Geologic map of the Storm King Mountain quadrangle, Garfield County, Colorado

New 1:24,000-scale geologic mapping in the Storm King Mountain 7.5' quadrangle, in support of the USGS Western Colorado I-70 Corridor Cooperative Geologic Mapping Project, provides new data on the structure on the south margin of the White River uplift and the Grand Hogback and on the nature, history, and distribution of surficial geologic units. Rocks ranging from Holocene to Proterozoic in age are shown on the map. The Canyon Creek Conglomerate, a unit presently known to only occur in this quadrangle, is interpreted to have been deposited in a very steep sided local basin formed by dissolution of Pennsylvanian evaporite late in Tertiary time. At the top of the Late Cretaceous Williams Fork Formation is a unit of sandstone, siltstone, and claystone from which Late Cretaceous palynomorphs were obtained in one locality. This interval has been mapped previously as Ohio Creek Conglomerate, but it does not fit the current interpretation of the origin of the Ohio Creek. Rocks previously mapped as Frontier Sandstone and Mowry Shale are here mapped as the lower member of the Mancos Shale and contain beds equivalent to the Juana Lopez Member of the Mancos Shale in northwestern New Mexico. The Pennsylvanian Eagle Valley Formation in this quadrangle grades into Eagle Valley Evaporite as mapped by Kirkham and others (1997) in the Glenwood Springs area. The Storm King Mountain quadrangle spans the south margin of the White River uplift and crosses the Grand Hogback monocline into the Piceance basin. Nearly flat lying Mississippian through Cambrian sedimentary rocks capping the White River uplift are bent into gentle south dips and broken by faults at the edge of the uplift. South of these faults the beds dip moderately to steeply to the south and are locally overturned. These dips are interrupted by a structural terrace on which are superposed numerous gentle minor folds and faults. This terrace has an east-west extent similar to that of the Canyon Creek Conglomerate to the north. We interpret that the terrace formed by movement of Eagle Evaporite from below in response to dissolution and diapirism in the area underlain by the conglomerate. A low-angle normal fault dipping gently north near the north margin of the quadrangle may have formed also in response to diapirism and dissolution in the area of the Canyon Creek Conglomerate. Along the east edge of the quadrangle Miocene basalt flows are offset by faults along bedding planes in underlying south-dipping Cretaceous rocks, probably because of diapiric movement of evaporite into the Cattle Creek anticline (Kirkham and Widmann, 1997). Steep topography and weak rocks combine to produce a variety of geologic hazards in the quadrangle.

Miscellaneous Field Studies Map↗
USGS2020

Bedrock geologic map of the Springfield 7.5- x 15-minute quadrangle, Windsor County, Vermont, and Sullivan County, New Hampshire

The bedrock geology of the 7.5- by 15-minute Springfield quadrangle consists of highly deformed and metamorphosed Mesoproterozoic through Devonian metasedimentary and meta-igneous rocks. In the west, Mesoproterozoic gneisses of the Mount Holly Complex are the oldest rocks and form the eastern side of the Chester dome. The Moretown slice structurally overlies the Chester dome along the Keyes Mountain thrust fault which represents the Ordovician Taconic suture (Red Indian Line) between Laurentian and Ganderian crust. The allochthonous Cambrian through Ordovician Moretown slice includes the Moretown and Cram Hill Formations and the North River Igneous Suite. Silurian and Devonian metasedimentary and metavolcanic rocks of the Connecticut Valley trough (CVT) unconformably overlie the Moretown slice. Ordovician to Silurian and Devonian metasedimentary and meta-igneous rocks of the New Hampshire sequence structurally overlie the CVT along the Devonian, Acadian Monroe thrust fault. The oldest part of the New Hampshire sequence consists of Ordovician metamorphosed volcanic, plutonic, and sedimentary rocks of the Bronson Hill arc including the Ammonoosuc Volcanics, the Partridge Formation, and the Oliverian Plutonic Suite. The Ammonoosuc Volcanics are the base of the exposed arc section in the map area. The Bronson Hill arc rocks are exposed in fault-bounded structural belts, including the Monroe thrust sheet, the Claremont belt, the Sugar River and Unity domes, and the footwall of the Brennan Hill thrust fault. Silurian to Devonian metasedimentary rocks of the Clough Quartzite, and Fitch and Littleton Formations unconformably overlie the Bronson Hill arc rocks. Devonian granitic and pegmatitic dikes and sills of the New Hampshire Plutonic Suite intruded previously deformed rocks. Devonian, Acadian F 1 fold nappes have a sheath fold geometry and are truncated by multiple generations of faults. The Bronson Hill arc structurally overlies the CVT along the Acadian Monroe fault with preserved tectonic mélange in the footwall. Upright dome-stage F 2 folds post-date amphibolite facies metamorphism and locally developed into sheath folds in high-strain zones. F 3 folds exhibit sinistral rotation associated with Alleghanian lower-greenschist facies faults. Late Paleozoic Alleghanian to Mesozoic shear zones transpose stratigraphy, early structures, and peak metamorphic isograds. 40 Ar/ 39 Ar white-mica growth ages (300–250 million years before present [Ma]) indicate that retrograde deformation continued into the latest Paleozoic and earliest Mesozoic. Apatite fission track data show that brittle faults were active prior to about 100 Ma and experienced Late Cretaceous and even Paleocene re-activation. The bedrock geology was mapped to study the tectonic history of the area and to provide a framework for ongoing characterization of the bedrock of Vermont and New Hampshire. This Scientific Investigations Map of the Springfield 7.5- x 15-minute quadrangle consists of sheets 1 and 2 as well as a geographic information system (GIS) database that includes bedrock geologic units, faults, outcrops, and structural geologic information. Sheet 1 of the report includes a bedrock geologic map, a correlation of map units, and a description of map units. Sheet 2 includes a discussion of the geology, references cited, two cross sections from the geologic map on sheet 1, a tectonic map showing major structural features, and a structural domain map showing the orientation of brittle features.

New Hampshire, Vermont↗
USGS2006

The fate of diamondoids in coals and sedimentary rocks

Diamondoids were detected in the extracts of a series of coals and rocks varying in maturity, lithology, source input, and depositional environment. At the same maturity level, diamondoids are generally about a magnitude more abundant in source rocks than in coals. The concentrations of diamondoids are maturity dependent. However, while diamondoids become more abundant with the increasing thermal maturity, a diminution in diamondoid concentrations is observed at the maturity value of about Ro = 4.0% in both coals and rocks. The occurrence of diamantane destruction at 550 ??C during pyrolysis suggests that diamondoids may be eventually destroyed at high temperatures in the Earth. Here we propose three main phases of diamondoid life in nature: diamondoid generation (phase I, Ro < 1.1%), diamondoid generation and enrichment (phase II, 1.1% ??? Ro ??? 4.0%), and diamondoid destruction (phase III, Ro > 4.0%). ?? 2006 Geological Society of America.

Geology↗
USGS2009

Allogenic sedimentary components of Bear Lake, Utah and Idaho

Bear Lake is a long-lived lake filling a tectonic depression between the Bear River Range to the west and the Bear River Plateau to the east, and straddling the border between Utah and Idaho. Mineralogy, elemental geochemistry, and magnetic properties provide information about variations in provenance of allogenic lithic material in last-glacial-age, quartz-rich sediment in Bear Lake. Grain-size data from the siliciclastic fraction of late-glacial to Holocene carbonate-rich sediments provide information about variations in lake level. For the quartz-rich lower unit, which was deposited while the Bear River fl owed into and out of the lake, four source areas are recognized on the basis of modern fluvial samples with contrasting properties that reflect differences in bedrock geology and in magnetite content from dust. One of these areas is underlain by hematite-rich Uinta Mountain Group rocks in the headwaters of the Bear River. Although Uinta Mountain Group rocks make up a small fraction of the catchment, hematite-rich material from this area is an important component of the lower unit. This material is interpreted to be glacial fl our. Variations in the input of glacial flour are interpreted as having caused quasi-cyclical variations in mineralogical and elemental concentrations, and in magnetic properties within the lower unit. The carbonate-rich younger unit was deposited under conditions similar to those of the modern lake, with the Bear River largely bypassing the lake. For two cores taken in more than 30 m of water, median grain sizes in this unit range from ???6 ??m to more than 30 ??m, with the coarsest grain sizes associated with beach or shallow-water deposits. Similar grain-size variations are observed as a function of water depth in the modern lake and provide the basis for interpreting the core grain-size data in terms of lake level. Copyright ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America↗
USGS1990

Studies of geology and hydrology in the Basin and Range Province, Southwestern United States, for isolation of high-level radioactive waste - Characterization of the Bonneville region, Utah and Nevada

The Bonneville region of the Basin and Range province in westcentral Utah and adjacent Nevada includes several basins lying south of the Great Salt Lake Desert. Physiographically, the region consists of linear, north-trending mountain ranges separated by valleys, many of which are closed basins underlain by thick sequences of fill. Surface drainage of open basins and ground-water flow is to the Great Salt Lake Desert. In structure and composition the ranges are faulted Paleozoic rocks, locally intruded by Mesozoic and Tertiary plugs and stocks. In the southern and northeastern parts of the region, volcanic rocks are widespread and form large parts of some mountain ranges. The Paleozoic sedimentary rocks include great thicknesses of carbonate rocks which compose a significant aquifer in the region Media considered to have potential for isolation of high-level radioactive waste in the region include intrusive rocks, such as granite; ash-flow tuff; and basalt and basaltic andesite lava flows. These rock types, basin fill, and possibly other rock types, may have potential as host media in the unsaturated zone. Quaternary tectonism in the region is evidenced by seismic activity, local areas of above-normal geothermal heat flow, Quaternary faulting, late Cenozoic volcanic activity, and active vertical crustal movement. The Bonneville region is part of a large ground-water flow system that is integrated partly through basin-fill deposits, but largely through an underlying carbonate-rock sequence. The region includes: (1) several topographically closed basins with virtually no local surface discharge that are drained by the underlying carbonate-rock aquifer; (2) closed basins with local surface discharge by evapotranspiration; and (3) basins open to the Great Salt Lake Desert that discharge by groundwater underflow and evapotranspiration. The carbonate-rock aquifer discharges to large springs in the Desert and in basins tributary to the Desert. The climate is arid to semiarid with the greatest precipitation in the mountain ranges. Most recharge probably occurs by infiltration of runoff as it leaves the mountains, although some recharge probably occurs directly to the carbonate rocks in the mountain areas. The concentration of dissolved solids in ground water is generally less than 500 milligrams per liter. Dissolved-solids concentrations increase in the Great Salt Lake Desert and in major valleys adjoining the Desert. The predominant chemical constituents in ground water are calcium, magnesium, and sodium bicarbonate. Chloride-type water is associated with the higher dissolved-solids content of water in and near the Great Salt Lake Desert. The majority of the mineral occurrences containing base- and precious-metal deposits in the Bonneville region are of Tertiary age. Fluorspar is the primary industrial mineral. Coal, oil, and gas have not been produced in significant amounts.

Nevada, Utah↗
USGS2017

Fractional crystallization-induced variations in sulfides from the Noril’sk-Talnakh mining district (polar Siberia, Russia)

The distribution of platinum-group elements (PGE) within zoned magmatic ore bodies has been extensively studied and appears to be controlled by the partitioning behavior of the PGE during fractional crystallization of magmatic sulfide liquids. However, other chalcophile elements, especially TABS (Te, As, Bi, Sb, and Sn) have been neglected despite their critical role in forming platinum-group minerals (PGM). TABS are volatile trace elements that are considered to be mobile so investigating their primary distribution may be challenging in magmatic ore bodies that have been somewhat altered. Magmatic sulfide ore bodies from the Noril’sk-Talnakh mining district (polar Siberia, Russia) offer an exceptional opportunity to investigate the behavior of TABS during fractional crystallization of sulfide liquids and PGM formation as the primary features of the ore bodies have been relatively well preserved. In this study, new petrographic (2D and 3D) and whole-rock geochemical data from Cu-poor to Cu-rich sulfide ores of the Noril’sk-Talnakh mining district are integrated with published data to consider the role of fractional crystallization in generating mineralogical and geochemical variations across the different ore types (disseminated to massive). Despite textural variations in Cu-rich massive sulfides (lenses, veins, and breccias), these sulfides have similar chemical compositions, which suggests that Cu-rich veins and breccias formed from fractionated sulfide liquids that were injected into the surrounding rocks. Numerical modeling using the median disseminated sulfide composition as the initial sulfide liquid composition and recent DMSS/liq and DISS/liq predicts the compositional variations observed in the massive sulfides, especially in terms of Pt, Pd, and TABS. Therefore, distribution of these elements in the massive sulfides was likely controlled by their partitioning behavior during sulfide liquid fractional crystallization, prior to PGM formation. Our observations indicate that in the Cu-poor massive sulfides the PGM formed as the result of exsolution from sulfide minerals whereas in the Cu-rich massive sulfides the PGM formed by crystallization from late-stage fractionated sulfide liquids. We suggest that the significant amount of Sn-bearing PGM may be related to crustal contamination from granodiorite, whereas As, Bi, Te, and Sb were likely added to the magma along with S from sedimentary rocks. Large PGM that are scarce and randomly distributed may account for most of the whole-rock Pt budget. Based on our results, we propose a holistic genetic model for the formation of the magmatic sulfide ore bodies of the Noril’sk-Talnakh mining district.

Siberia↗
USGS1994

'The Kesterson effect'

Hypothesized to be derived from Cretaceous marine sedimentary rocks, selenium contamination of the Kesterson National Wildlife Refuge is traced through irrigation drainage to the source bedrock of the California Coast Ranges. This biogeochemical pathway of selenium is defined here as the 'Kesterson effect.' At the refuge ponds, this effect culminated in 1983 in a 64% rate of deformity and death of embryos and hatchlings of wild aquatic birds. From the previous companion paper on irrigation drainage, the Kesterson effect has been implicated in nine of 11 reconnaissance areas studied in the western United States. Deformities have resulted in at least five of these sites. Climatic, geologic, hydrologic, and soil conditions in these reconnaissance areas are similar to those in the area surrounding Kesterson National Wildlife Refuge in the west-central San Joaquin Valley of California, in California, selenium as selenate, was ultimately found weathered with sulfur from marine sources in soluble sodium and magnesium sulfate salts, which are concentrated by evaporation on farmland soils. The Se, mobilized by irrigation drainage, is bioaccumulated to toxic levels in refuge wetland ponds that are located mainly in hydrologically closed basins and thus act as concentrating disposal points. The depositional environment of the ponds may be similar to that of the nutrient-rich continental shelf edge and slope in which Cretaceous, Eocene, and Miocene sediments found to be seleniferous in the California Coast Ranges were deposited. Bioaccumulation may be therefore a primary mechanism of selenium enrichment in ancient sediments in addition to that of the formerly suggested Cretaceous volcanic pathway.

California↗