USGS Science⌕ Search

SEARCH · USGS Science

Results for “The R Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95Linked to original sources
USGS1985

Digital to analog conversion and visual evaluation of Thematic Mapper data

As a part of the National Aeronautics and Space Administration Landsat D Image Data Quality Analysis Program, the Earth Resources Observation Systems Data Center (EDC) developed procedures to optimize the visual information content of Thematic Mapper data and evaluate the resulting photographic products by visual interpretation. A digital-to-analog transfer function was developed which would properly place the digital values on the most useable portion of a film response curve. Individual black-and-white transparencies generated using the resulting look-up tables were utilized in the production of color-composite images with varying band combinations. Four experienced photointerpreters ranked 2-cm-diameter (0. 75 inch) chips of selected image features of each band combination for ease of interpretability. A nonparametric rank-order test determined the significance of interpreter preference for the band combinations.

Journal of Imaging Technology↗
USGS1977

Microwave radiometric survey of the San Joaquin nuclear project site, Kern County, California

An airborne microwave survey was made in the region of the San Joaquin nuclear project site near Bakersfield, Calif. The purpose of the study was to determine if the variability of soil emissivity due to moisture content is a valid near-surface expression of buried fault systems. The results showed the existence of linear-emissivity anomalies paralleling, and to some extent, overlying the Greeley and Pond-Poso Creek faults. The anomalies seem to be direct expressions of silt-filled, northwesterly trending channels of the Pond-Poso Creek-Tulare Lake distributary system. The location, orientation, and linearity of the distributary channels suggest an association with buried faults, but no relationship has yet been determined.

California↗
USGS1977

Spherulitic rhyolite dike from Goat Island, southeastern Alaska

Spherulites, as much as 4 mm in diameter, locally constitute almost 50 percent by volume of a dark-red rhyolite dike that intrudes porphyritic pyroxene gabbro along the northeast coast of Goat Island, 3.2 km northwest of Hydaburg, southeastern Alaska. The largest spherulites are composed mainly of o-quartz, whereas the smallest consist of a microcrystalline intergrowth of tridymite and alkali feldspar. Textural relations indicate that the radial and concentrically zoned structures are the products.of devitrification of glassy lava. The mineralogy of the dike is similar to that of other spherulitic rhyolites except that quartz occurs to the exclusion of cristobalite. The posteruptive formation of the spherulites has also resulted in alkali transfer, the groundmass of the dike being enriched in both sodium and potassium relative to the spherulites.

Alaska↗
USGS1977

Relation of surflcial erosion on hillslopes to profile geometry

Differences in erosion rates in relation to the geometry of hillslope profiles were hypothesized by R. E. Horton in 1945. Experimental testing of this hypothesis is described for natural hillslopes in western Colorado using a rainfall simulator to apply five "storms" each having an intensity of 1.85 inches per hour (47 millimeters per hour). Erosion from straight hillslope segments was about twice the amount from convex and concave segments along nine hillslope transects. Standard deviations of erosion measurements for each segment show that the greatest variation occurs in concave slope segments. This is probably because the concave segment is the only place on the profile where deposition occurs. Analysis of variance indicates that the amount of erosion is significant at the 1-percent level of confidence between convex and straight slope segments and at the 5-percent level of confidence between straight and convex slope segments.

Colorado↗
USGS1976

Bulk chemical analyses of petrographic thin sections of rocks of the Samli area, western Turkey

Petrographic thin sections have been analyzed for their major-element composition using a fusion-dilution technique and measuring the intensity of X-rays by means of the electron microprobe. The balsam-mounted thin sections were removed from the glass slides by soaking them in methylene chloride. The freed sections were mixed with twice their weight of Li 2 B 4 O 7 , and fused at 1100° C. A fragment of the resulting glasslike bead was mounted for probe analysis. Both wavelength and energy-dispersive detector systems were used for quantitative determinations of elements sodium through iron. Because the samples and standards are diluted and fused, powdered rock standards may be used as reference materials. The calibration curves obtained by plotting X-ray intensity versus concentration of the analyte are linear over the concentration ranges used in this work and have an overall range of error of 2 to 8 percent. Although some of the analytical values show excessive scatter for petrographically similar rocks, in general the analyses are acceptable given the sample size and analytical uncertainties. Bulk chemical analyses were made of 18 thin sections, including altered diabase, amphibolite, and calc-silicate hornfels produced by progressive contact metamorphism and associated with metasomatic magnetite deposits in the Samli area, western Turkey. Normative plots indicate that (1) diabase and amphibolite are compositionally related and are similar to average compositions of basalts and orthoamphibolites, and (2) calc-silicate hornfels appears to have been derived in part from amphibolite and in part from crystalline limestone that underlies much of the region.

Journal of Research of the U.S. Geological Survey↗
USGS1973

Potential shale-oil resources of a stratigraphic sequence above the Mahogany Zone, Green River Formation, Piceance Creek Basin, Colorado

In the southern part of the Piceance Creek basin the upper part of the Green River Formation above the Mahogany zone contains beds of rich oil shale which may be economically recoverable by a surface-mining operation. Four units within this sequence were evaluated for thickness, distribution, oil yield, and potential shale-oil resources. In the area appraised, total estimated resources of 128.5 billion bbl of oil are contained within the sequence. It is thickest in T. 3 S., R. 96 W., where 354 feet of oil shale yields an average of 14 gal of oil per ton, with a total resource of 9.0 billion bbl. It is richest in T. 5 S., R. 96 W., where 250 feet of oil shale yields an average of 19 gal of oil per ton, with a total resource of 6.5 billion bbl. Resources are tabulated for four units of the sequence.

Colorado, Utah, Wyoming↗
USGS1973

A study of the distribution of the polychlorinated biphenyls in the aquatic environment

Data gathered from monitoring activities and project studies indicate the ubiquitous occurrence and distribution of polychlorinated biphenyls in the aquatic environment. Residues have been detected in samples from 19 States, representing nearly every region of the country. Concentrations ranged from 0.1 to 4.0 ug/l in unfiltered water samples and 5.0 to 3,200 ug/kg in bottom sediments. PCB residues were also found in fish and aquatic plants. Samples were prepared by the same techniques used for general chlorinated insecticide detection, with special attention to cleanup and separation of PCB's from other compounds. Basic identification and quantification were made by dual-column electron-capture gas chromatography and confirmed by gas chromatography mass spectrometry whenever possible. The sampling program is expected to be broadened geographically in 1973 and increased in successive years in order to more adequately define the distribution of PCB residues in the major drainage basins of the United States.

Journal of Research of the U.S. Geological Survey↗
USGS1974

Stable isotope and lead isotope study of the Cortez, Nevada, gold deposit and surrounding area

Isotope studies of sulfur, carbon, hydrogen, oxygen, and lead were carried out to clarify the age and origin of the Cortex gold deposit and the surrounding mineralized area. The hydrogen isotope data indicate that meteoric water was the dominant component of the ore-forming fluids at Cortez. The hydrogen isotope data support geologic evidence for a Tertiary age for the deposit. The oxidation of the ore probably occurred during the deposition of postore calcite and was caused by waters whose oxygen isotopic composition was distinctly different from that of the ore fluids. The carbon isotope data suggest that the only carbon present in the ore fluids was derived from solution of the host rock. The lead and sulfur data are consistent with a possible sedimentary derivation for the gold in the ore. Lead and sulfur isotope distributions indicate that much of the galena mineralization in the area occurred during the Jurassic.

Nevada↗
USGS1976

Trace-metal variation in soils and sagebrush in the Powder River Basin, Wyoming and Montana

A reconnaissance study of 28 trace metals in samples of surface soil (0-2.5 cm deep), subsurface soil (15-20 cm deep), and big sagebrush ( Artemisia tridentata ) that were collected from the Powder River Basin in Wyoming and Montana indicates that little variation occurs in nature at scales greater than about 35 km. This general lack of broadscale variation suggests that simple summary statistics for these materials could provide basinwide geochemical baselines for use in monitoring secular changes in the local geochemical environment. Samples of big sagebrush near the Dave Johnston Power Plant at the southern edge of the basin exhibit statistically significant reductions of strontium, vanadium, uranium, and selenium eastward from the plant.

Montana, Wyoming↗
USGS1976

Age and origin of the Darrough Felsite, southern Toiyabe Range, Nevada

The name Darrough Felsite was originally assigned to a body of fine-grained quartzofeldspathic igneous rock probably greater than 3 km thick that is exposed continuously over 100 km 2 in the southern Toiyabe Range of central Nevada. The Darrough was supposed to consist mostly of intrusive rocks of probable Permian age. Reexamination of parts of the Darrough Felsite indicates that it is Tertiary and has no genetic affiliation to pre-Tertiary sedimentary and volcanic rocks of the Toiyabe Range. The Darrough constitutes an enormously thick succession of crystal-lithic tuff, tuff breccia, crystal tuff, and volcanogenic sedimentary breccia and sandstone. The tuffaceous rocks are strongly compacted where ash particles are the dominant constituent but are much less compacted where lithic fragments and crystals constitute a rigid framework. Much of the Darrough Felsite may have undergone extensive siliciflcation, probably as a postcompaction event. Contact relations of the Darrough Felsite indicate that it is younger than pre-Tertiary rocks of the southern Toiyabe Range and the Ophir pluton, here dated at 53.9 m.y. (K-Ar, biotite). Three K-Ar ages of minerals from tuff of the Darrough are 26.1, 22.7, and 22.3 m.y., suggesting a middle Tertiary age. A large dike intruding the Darrough. previously assigned a Jurassic age, gives a K-Ar-biotite age of 29.4 m.y. We tentatively interpret the Darrough Felsite to represent an accumulation of ash and breccia flows in a volcanotectonic depression.

Nevada↗
USGS1978

Significance of age relations above and below upper jurassic ophiolite in the Geysers-Clear Lake region, California

In The Geysers-Clear Lake area of northern California, a fragmented Upper Jurassic ophiolite overlain depositionally by the Great Valley sequence is juxtaposed over deformed and metomorphosed rocks of the Franciscan assemblage along the Coast Range thrust. The basal strata of the Great Valley sequence consist of thick breccias of mafic clasts, identical in composition to the upper part of the ophiolite. These breccias and their contact relations suggest that more than 1 km of the upper part of the ophiolite was locally eroded in early Tithonian time. On the basis of their radiolarian faunas, cherts in the Franciscan assemblage below the ophiolite range in age from Late Jurassic (early Tithonian) to Late Cretaceous (early Cenomanian). Of particular significance is an individual chert body (= The Geysers chert) of this age range. The early Cenomanian radiolarians, except for two occurrences associated with pelagic limestone, are significantly younger than those previously reported from the Franciscan assemblage. The existence of a sequence of Late Jurassic to Late Cretaceous radiolarian chert places critical constraints on subduction models for emplacement of the Franciscan assemblage beneath the Coast Range ophiolite and Great Valley sequence in The Geysers-Clear Lake area. From early Tithonian to post-early Cenomanian time, the Franciscan assemblage received pelagic sedimentation far from any site of subduction. By other data, blueschist metamorphism of subducted Franciscan strata also occurred during this time. The radiolarian data from The Geysers area permit a correlation with Upper Cretaceous pelagic limestones in the Laytonville area northwest of The Geysers and also imply that the Great Valley sequence was never depositionally in contact with the Franciscan assemblage.

California↗
USGS1975

Analysis for tellurium in rocks to 5 parts per billion

In the proposed method, a 12.5-g sample is digested with nitric acid and evaporated to dryness; the excess nitric acid is removed by reaction with formic acid. Tellurium is extracted from the dried residue into hydrobromic acid and is then coprecipitated with arsenic, using hypophosphorous acid as the reducing agent. The precipitate is dissolved in a solution of hydrobromic acid and bromine, from which the tellurium is extracted into 0.6 ml of methyl isobutyl ketone. Tellurium content is estimated by atomic absorption spectrophotometry. Recovery of tellurium from nitric acid solutions carried through the procedure approached 100 percent through the analytical range 5-200 ppb. The relative standard deviation of five consecutive analyses of USGS standard rock GSP-1 was 5.26 percent at a mean concentration of 20.8 ppb. Under optimum conditions an average of 20 samples may be analyzed per man-day.

Colorado↗
USGS1994

Biological monitoring of environmental quality: The use of developmental instability

Distributed robustness is thought to influence the buffering of random phenotypic variation through the scale-free topology of gene regulatory, metabolic, and protein-protein interaction networks. If this hypothesis is true, then the phenotypic response to the perturbation of particular nodes in such a network should be proportional to the number of links those nodes make with neighboring nodes. This suggests a probability distribution approximating an inverse power-law of random phenotypic variation. Zero phenotypic variation, however, is impossible, because random molecular and cellular processes are essential to normal development. Consequently, a more realistic distribution should have a y-intercept close to zero in the lower tail, a mode greater than zero, and a long (fat) upper tail. The double Pareto-lognormal (DPLN) distribution is an ideal candidate distribution. It consists of a mixture of a lognormal body and upper and lower power-law tails.

Journal of Environmental Engineering↗
USGS1976

The heat capacities at low temperatures and entropies at 298.15 K of low albite, analbite, microline, and high sanidine

The heat capacities of low albite and analbite, NaAlSi 3 O 8 , and of microcline and high sanidine, KAlSi 3 Og, have been measured from 15 to 375 K using an adiabatic calorimeter. Tables of the thermodynamic functions C° p , (H° T –H° 0 )/T, (G° T –H° 0 )/T, and S° T –S° 0 are presented for these four feldspars from 0 to 370 K. At 298.15 K (25.0°C) the values for S° T S° 0 for low albite, analbite, microcline, and high sanidine are 207.4±0.4, 207.7±0.4, 214.2±0.4, and 214.2±0.4 J/(mol . K), respectively. The effect of the state of Al/Si order upon the heat capacity is quite small. The difference, ΔC° p , between albite-analbite and microcline-sanidine never exceeds 0.5 percent at temperatures below 400 K. With the exception of microcline, the heat capacities of these four feldspars follow a smooth S-shaped curve between 15 and 375 K, with no indication of transitions or anomalous behavior. Above 250 K, the heat capacity of microcline shows a form of thermal hysteresis. In the temperature range 250 to 375 K, the heat capacity of microcline is dependent upon its past thermal history. At 375 K, microcline which had been cooled to 230 K before the measurement of C° p has a heat capacity greater by approximately 1.2 percent than microcline which had not been previously cooled below 295 K. After a day of annealing at about 300 K, C° p of the previously cooled microcline decreases to essentially the same value as the microcline which had never been at a temperature below 300 K.

Journal of Research of the U.S. Geological Survey↗
USGS1976

Development of a standard rating for the Price pygmy current meter

Fifty new Price pygmy current meters, 50 used Price pygmy meters with used rotors, 50 used Price pygmy meters with new rotors, and 26 used Price pygmy meters with straight uniform (nonbeaded) contact wires were rated individually in a towing tank. A standard rating of V =0.961 N +0.039 ( V =0.293 N +0.012), where V is the velocity in feet per second (metres per second) and N is the meter rotation in revolutions per second, was established for the group of new meters. Repeated ratings of two new meters showed that under the best rating conditions, the individual Price pygmy rating is repeatable to within 1 percent. The standard errors of velocities predicted using the individual ratings and the standard ratings were compared. The use of the standard rating resulted in statistically higher standard errors than the individual ratings for all groups of meters. However, the differences are a fraction of 1 percent higher and are not of concern for practical purposes. The individual ratings and standard rating for the used meters with new straight contact wires were found to be statistically similar to the ratings for the new meters. Continuation of the use of individual ratings of Price pygmy current meters is probably unnecessary with the implementation of precise standards in their manufacture, rating of a random sample, and use.

Journal of Research of the U.S. Geological Survey↗
USGS1978

Stable isotope studies of bedded barite at East Northumberland Canyon in Toquima Range, central Nevada

Several beds of barite occur in the Slaven Chert at East Northumberland Canyon in the Toquima Range of central Nevada. Most of the barite is internally laminated but shows massive weathering. However, rosette, disseminated, conglomeratic, and concretionary varieties also occur. New fossil evidence from conodonts and brachiopods indicates a Late Devonian age for the Slaven Chert at East Northumberland Canyon. Preliminary δ 34 S values of most disseminated and massive-laminated barite within the Slaven Chert average about 25 permil; these are within the range of values that is typical of sulfate from Late Devonian seawater and are distinctly different from δ 34 S values of most crosscutting hydrothermal barite veins in the area. Primary δ 34 S values of the bedded barite appear to be retained during recrystallization and hydrothermal alteration, suggesting that δ 34 S data of bedded barites could be developed into a useful stratigraphic tool. The δ 34 S values of rosette and concrectionary barites range from 29.1 to 56.3 permil and indicate that these varieties of barite formed in restricted microenvironments where extensive bacterial reduction of seawater sulfate occurred. The δ 18 O data on cherts associated with the barite beds and δ 14 C and δ 18 O data on carbonate beds within the Slaven Chert indicate that the depositional environment at tames had restricted communication with normal seawater of the open ocean.

Nevada↗
USGS1977

Mercury in oil shale from the mahogany zone of the Green River formation, eastern Utah and western Colorado

Mercury has been reported in concentrations as high as 4 parts per million from oil shale in the Green River Formation near the Federal oil-shale prototype lease-tracts U-a and U-b in eastern Utah. This high concentration of mercury if present throughout a minable zone, would be of concern in commercial oil-shale operations processing large volumes of shale. Using an improved analytical method, surface samples from eastern Utah previously reported to contain high concentrations of mercury were reanalyzed, and an additional 183 drill core samples from the Mahogany zone and adjacent beds were analyzed. The reanalyzed samples averaged slightly more than 0.35 ppm mercury and the drill-core samples averaged 0.37 ppm. The products from a Fischer assay of 100-gram sample of oil shale, found to yield 35 gallons pier ton of oil and 43 ppm of mercury, were analyzed for their mercury content. The spent shale contained only 2 percent of the total mercury in the assay products and the gas fraction contained about 58 percent.

Colorado, Utah↗
USGS1976

Brannerite from the Penn Haven Junction uranium occurrence, Carbon County, Pennsylvania

Thorium-free brannerite has been identified in Upper Devonian uraniferous sandstone from Penn Haven Junction, Carbon County, Pa. The brannerite was located by a variation of the "Lexan" technique and is associated with galena, uraninite, and clausthalite. The angular thorium-free nature of the brannerite suggests that it formed by metamorphism of uranium-saturated leucoxene. As a result of the metamorphism some uranium may be in less soluble minerals than those found in the uranium deposits of the Western United States. For this reason, in-place leaching of the uranium may be impractical.

Pennsylvania↗