USGS Science⌕ Search

SEARCH · USGS Science

Results for “Stages”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95Linked to original sources
USGS2005

Identification of amoebae implicated in the life cycle of Pfiesteria and Pfiesteria-like dinoflagellates

This study was undertaken to assess whether amoebae commonly found in mesohaline environments are in fact stages in the life cycles of Pfiesteria and Pfiesteria-like dinoflagellates. Primary isolations of amoebae and dinoflagellates were made from water and sediment samples from five tributaries of the Chesapeake Bay. Additional amoebae were also cloned from bioassay aquaria where fish mortality was attributed to Pfiesteria . Electron microscopy and small subunit (SSU) rRNA gene sequence analysis of these isolates clearly demonstrated that the commonly depicted amoeboid form of Pfiesteria is very likely a species of Korotnevella and is unrelated to Pfiesteria or Pfiesteria -like dinoflagellates. We have determined that the Pfiesteria and Pfiesteria -like dinoflagellates examined in this study undergo a typical homothallic life cycle without amoeboid stages. Furthermore, we have demonstrated that cloned amoebae sharing morphological characteristics described for stages in the life cycle of Pfiesteria do not transform into dinozoites. The strict clonal isolation and cultivation techniques used in this study substantially support the conclusion that the amoebae and some of the flagellates depicted in the life cycle of Pfiesteria are environmental contaminants of the Pfiesteria culture system and that the Ambush Predator Hypothesis needs to be rigorously reevaluated.

Maryland, Virginia↗
USGS2013

Parasites as prey in aquatic food webs: implications for predator infection and parasite transmission

While the recent inclusion of parasites into food-web studies has highlighted the role of parasites as consumers, there is accumulating evidence that parasites can also serve as prey for predators. Here we investigated empirical patterns of predation on parasites and their relationships with parasite transmission in eight topological food webs representing marine and freshwater ecosystems. Within each food web, we examined links in the typical predator–prey sub web as well as the predator–parasite sub web, i.e. the quadrant of the food web indicating which predators eat parasites. Most predator– parasite links represented ‘concomitant predation’ (consumption and death of a parasite along with the prey/host; 58–72%), followed by ‘trophic transmission’ (predator feeds on infected prey and becomes infected; 8–32%) and predation on free-living parasite life-cycle stages (4–30%). Parasite life-cycle stages had, on average, between 4.2 and 14.2 predators. Among the food webs, as predator richness increased, the number of links exploited by trophically transmitted parasites increased at about the same rate as did the number of links where these stages serve as prey. On the whole, our analyses suggest that predation on parasites has important consequences for both predators and parasites, and food web structure. Because our analysis is solely based on topological webs, determining the strength of these interactions is a promising avenue for future research.

Oikos↗
USGS2005

Implementation and use of direct-flow connections in a coupled ground-water and surface-water model

The U.S. Geological Survey's MODFLOW finite-difference ground-water flow model has been coupled with three surface-water packages - the MODBRANCH, River, and Stream packages - to simulate surface water and its interaction with ground water. Prior to the development of the coupling packages, the only interaction between these modeling packages was that leakage values could be passed between MODFLOW and the three surface-water packages. To facilitate wider and more flexible uses of the models, a computer program was developed and added to MODFLOW to allow direct flows or stages to be passed between any of the packages and MODFLOW. The flows or stages calculated in one package can be set as boundary discharges or stages to be used in another package. Several modeling packages can be used in the same simulation depending upon the level of sophistication needed in the various reaches being modeled. This computer program is especially useful when any of the River, Stream, or MODBRANCH packages are used to model a river flowing directly into or out of wetlands in direct connection with the aquifer and represented in the model as an aquifer block. A field case study is shown to illustrate an application.

Groundwater↗
USGS2005

Simulating ground water-lake interactions: Approaches and insights

Approaches for modeling lake-ground water interactions have evolved significantly from early simulations that used fixed lake stages specified as constant head to sophisticated LAK packages for MODFLOW. Although model input can be complex, the LAK package capabilities and output are superior to methods that rely on a fixed lake stage and compare well to other simple methods where lake stage can be calculated. Regardless of the approach, guidelines presented here for model grid size, location of three-dimensional flow, and extent of vertical capture can facilitate the construction of appropriately detailed models that simulate important lake-ground water interactions without adding unnecessary complexity. In addition to MODFLOW approaches, lake simulation has been formulated in terms of analytic elements. The analytic element lake package had acceptable agreement with a published LAK1 problem, even though there were differences in the total lake conductance and number of layers used in the two models. The grid size used in the original LAK1 problem, however, violated a grid size guideline presented in this paper. Grid sensitivity analyses demonstrated that an appreciable discrepancy in the distribution of stream and lake flux was related to the large grid size used in the original LAK1 problem. This artifact is expected regardless of MODFLOW LAK package used. When the grid size was reduced, a finite-difference formulation approached the analytic element results. These insights and guidelines can help ensure that the proper lake simulation tool is being selected and applied.

Ground Water↗
USGS2012

Crowdsourcing to Acquire Hydrologic Data and Engage Citizen Scientists: CrowdHydrology

Spatially and temporally distributed measurements of processes, such as baseflow at the watershed scale, come at substantial equipment and personnel cost. Research presented here focuses on building a crowdsourced database of inexpensive distributed stream stage measurements. Signs on staff gauges encourage citizen scientists to voluntarily send hydrologic measurements (e.g., stream stage) via text message to a server that stores and displays the data on the web. Based on the crowdsourced stream stage, we evaluate the accuracy of citizen scientist measurements and measurement approach. The results show that crowdsourced data collection is a supplemental method for collecting hydrologic data and a promising method of public engagement.

Ground Water↗
USGS2021

Accuracy of histology, endoscopy, ultrasonography, and plasma sex steroids in describing the population reproductive structure of hatchery-origin and wild white sturgeon

Hatchery-origin white sturgeon Acipenser transmontanus in the lower Columbia River, Canada are approaching puberty, and describing the reproductive structure of the population is critical to determine if they are capable of contributing to spawning events in the wild, a key management uncertainty. Few studies have compared the accuracy of available tools (histology, ultrasound, endoscopy, and plasma sex steroids) used to assign sex and stage of maturity within the same population of prepubertal and post-pubertal sturgeon. Population reproductive structure was described using these tools in 332 hatchery-origin and 75 wild individuals over 2 years (2017 and 2018). True sex was determined using histological analysis of gonadal tissue, which is 100% accurate at assigning sex and stage of maturity in fish when germ cells are present in the biopsy. All hatchery-origin fish assessed had not reached puberty and were pre-meiotic males ( n = 158) or pre-vitellogenic females ( n = 174). Assignment of true sex using histology was 97% in hatchery-origin and 94% in wild fish as several biopsies did not contain germ cells. Fish with gonadal biopsies that did not contain germ cells and intersex fish ( n = 3) were not included in further analyses of other tools. Accuracy in assigning sex to both the hatchery-origin (98%) and wild (100%) fish was highest using endoscopy (an otoscope). The other tools evaluated were less accurate, with 69% accuracy in hatchery-origin and 74% accuracy in wild fish for plasma sex steroids and 57% accuracy in hatchery-origin and 70% accuracy in wild fish for ultrasonography. Based on these results, endoscopy was the most reliable tool for assigning sex in both prepubertal and post-pubertal fish and can be easily complimented with histology when determining stage of maturity or describing population reproductive structure.

British Columbia, Washington↗
USGS2022

Hidden in plain sight: Migration routes of the elusive Anadyr bar-tailed godwit revealed by satellite tracking

Satellite and GPS tracking technology continues to reveal new migration patterns of birds which enables comparative studies of migration strategies and distributional information useful in conservation. Bar-tailed godwits in the East Asian–Australasian Flyway Limosa lapponica baueri and L. l. menzbieri are known for their long non-stop flights, however these populations are in steep decline. A third subspecies in this flyway, L. l. anadyrensis , breeds in the Anadyr River basin, Chukotka, Russia, and is morphologically distinct from menzbieri and baueri based on comparison of museum specimens collected from breeding areas. However, the non-breeding distribution, migration route and population size of anadyrensis are entirely unknown. Among 24 female bar-tailed godwits tracked in 2015–2018 from northwest Australia, the main non-breeding area for menzbieri , two birds migrated further east than the rest to breed in the Anadyr River basin, i.e. they belonged to the anadyrensis subspecies. During pre-breeding migration, all birds staged in the Yellow Sea and then flew to the breeding grounds in the eastern Russian Arctic. After breeding, these two birds migrated southwestward to stage in Russia on the Kamchatka Peninsula and on Sakhalin Island en route to the Yellow Sea. This contrasts with the other 22 tracked godwits that followed the previously described route of menzbieri , i.e. they all migrated northwards to stage in the New Siberian Islands before turning south towards the Yellow Sea, and onwards to northwest Australia. Since the Kamchatka Peninsula was not used by any of the tracked menzbieri birds, the 4500 godwits counted in the Khairusova–Belogolovaya estuary in western Kamchatka may well be anadyrensis . Comparing migration patterns across the three bar-tailed godwits subspecies, the migration strategy of anadyrensis lies between that of menzbieri and baueri . Future investigations combining migration tracks with genomic data could reveal how differences in migration routines are evolved and maintained.

Journal of Avian Biology↗
USGS2000

Hydrologic budget of the late Oligocene Lake Creede and the evolution of the upper Rio Grande drainage system

The filling history, hydrologic budget, and geomorphic development of ancient Lake Creede and its tributary basin are evaluated to determine the factors that controlled its character. The lake filled the Creede caldera that formed in the late Oligocene as a consequence of the eruption of the Snowshoe Mountain Tuff. The caldera's sedimentary fill accumlated to a depth of about 1.26 km and had a volume of about 89 km 3 . The highest lake level was ~3300 m (10,800 ft) present altitude before it drained eastward across a broad volcanic plateau as the ancestral Rio Grande. A tributary canyon several hundred meters deep was cut into hard rhyolite in the north wall of the caldera before the lake was more than half full; its presence demonstrates that ancient Lake Creede filled slowly and thus occupied a long-lived, closed basin. The slow filling rate is incompatible with the present water flux through the Creede caldera basin, because such a flow would fill the basin geologically instantaneously. This mismatch, together with the recognition that the Oligocene climate was similar to that of today, forces the reexamination of the hydrologic and geomorphic history of the caldera. That appraisal shows that the caldera cannot have resurged rapidly immediately after caldera collapse, and that ancient watershed must have been lass than half as large as the present upper Rio Grande basin. The ancient lake had a more or less constant surface area of about 200 km 2 that approximated a steady-state condition between inflow and evaporation. Although the lake level fluctuated with climatic variations, its surface elevation steadily climbed as sediment accumulated, accelerating as resurgance and dome growth usurped spacewithin the basin. It could have had one playa stage early in its development and another after the basin had nearly filled with sediment, but there is no direct evidence for either. At least the lower half of the sedimentary column (the part sampled by the scientific drilling) formed in an euxinic environment. This argues against a persistent early playa, although evaporative accumulation of brine was inevitable. When the rate of resurgance was rapid relative to sedimentary infilling, the lake would have been deep (i.e., bordered by bedrock rather than sedimentary fans). The geomorphic evolution of the Creede caldera and its watershed tracks a two-phase topographic history, the first the Oligocene through Miocene, and the second for Pliocene to the recent. In Oligocene time, the San Juan volcanic field was a hydrologically immature, gently undulating, and outward sloping, constructional volcanic plateau straddling the ancient Continental Divide. West of the Creede caldera, a dendritic drainage discharged northeastward into ancestral Cebolla Creek (a tributary of the ancestral Gunnison River) through an early stage of the Clear Creek graben in the vicinity of Spring Creek Pass. Miocene basalt choked, but did not reconstruct, the drainage. By the end of Miocene time a mature topography of moderate relief developed, exposing some of the higher ores in the Creede district to weathering. In the late Miocene-early Pliocene time the San Juan Mountains were uplifted and titled eastward; the ancestral Rio Grande was revitalized and cut deeply into the older terrain, excavating much of the accessible sediment from the moat of the Creede caldera and exposing successively lowe levels in the Creede district to oxidation. Simultaneously, the southeast end of the Clear Creek graben was reactivated and breached the southwest wall of the Creede caldera. The rejuvenated Rio Grande captured the formerly northeast-directed headwaters of ancestral Cebolla Creek, shifting more than 1000 km 2 from the Pacific-directed drainage to the Atlantic. The water budget for ancient Lake Creede was strictly limited by the early stages of the fist geomorphic cycle; the modern water budget is the product of the second cycle.

Colorado↗
USGS1945

Glaciation of Mauna Kea, Hawaii

Wentworth and Powers have described four stages of glaciation on Mauna Kea, Hawaii. The type localities of the deposits have been studied by the writer, and only the latest or Makanaka deposits can be accepted as definitely glacial drift. The deposits of the first and second stages are paroxysmal explosion deposits. Those of the third stage are a fanglomerate that could have been laid down in early Wisconsin time by floods caused by hot lava melting the icecap.

Hawaii↗
USGS1957

Thermal waters of volcanic origin

Waters of widely differing chemical compositions have been considered at least in part volcanic in origin, and are commonly associated with each other in the same area. Do any or all of these types contain volcanic components, and if so, how are the different types derived? To determine the probable characteristics of volcanic waters, the writer has selected hot-spring groups that are particularly high in temperature and associated heat flow, are associated with late Tertiary or Quaternary volcanism, and are therefore most likely to contain some water and chemical components of direct volcanic origin. Of the different types of water that occur in these groups, one of the most common is characterized chemically by a dominance of sodium chloride. Isotopic evidence indicates that the contribution of water of direct volcanic origin is not large and is probably no more than 5 per cent in typical sodium-chloride springs. The compositions of volcanic waters are believed to be determined by: [1] type of magma and stage of crystallization; [2] temperature and pressure of the emanation at different stages during and after departure from the magma; [3] chemical composition, relative quantity, and depth of penetration of mixing meteoric water and water of other origin; and [4] reactions with wall rocks. Although the type of magma and its stage of crystallization are of major interest and have been emphasized in the past, the outstanding characteristics of volcanic emanations at and near the surface of the earth seem to be controlled for the most part by the other factors. Nonvolatile compounds are slightly to highly soluble in steam at high pressure, and high-density steam has solvent properties similar to those of liquid water. In the volcanic sodium-chloride waters, the high ratio of lithium to sodium and potassium is shown to indicate that alkalies were transported as alkali halides dissolved in a dense vapor. This in turn demands a deep circulation of meteoric water for steam to condense at high pressure and for the halides to remain in solution. The depth of circulation of meteoric water in the sodium-chloride spring systems is believed to be in the order of 2 miles. Where circulation of meteoric water is shallow, the vapors rise and expand at low pressure, which does not permit transport of substances of low volatility; some type of water other than the sodium-chloride type is formed. The common volcanic sodium-chloride waters are therefore concluded to be the diluted product of high-density emanations, modified by reactions with wall rocks and by precipitation of the less soluble components. Emanations at high temperature and relatively low pressure consist almost entirely of steam and volatile components. Their compositions are therefore relatively simple, and their ability to transport matter of low volatility is very limited. The sodium-chloride type is probably gradational into acid-sulfate-chloride waters. There is some evidence that, under conditions not well understood, sulfur may be emitted as SO 2 , SO 3 , or other sulfur species of intermediate valence, rather than as H 2 S or S. Other major types of volcanic waters are called sodium bicarbonate, acid sulfate, and calcium bicarbonate; the first two tend to be distinct, but the calcium-bicarbonate type clearly grades into the sodium-chloride type. The writer concludes that, in general, all these are derived from the sodium-chloride waters as a result of physical environment or of reactions with wall rocks.

GSA Bulletin↗
USGS1984

Mineralogy and chemistry of massive sulfide deposits from the Juan de Fuca Ridge

Six hydrothermal vent sites and associated benthic communities were located in the axial valley of the southern Juan de Fuca Ridge using transponder-navigated bottom photography. The hydrothermal deposits form ledges and shallow mounds within a central zone characterized by a linear bathymetric depression and numerous collapse features. The flat valley floor adjacent to the central zone consists of ferrobasalt lobate flows and sheet flows; sediment cover is minimal. Vent sites are characterized by concentrations of tube worms, clams, benthic siphonophores, and several unidentified fauna. Two types of massive sulfide were dredged from one of the vent sites. Type A samples are angular slabs of dark gray Zn-rich sulfide with interlayers and a thin, partly oxidized crust of Fe sulfide. These layered sulfide aggregates appear to be fragments of a sulfide wall enclosing an active hydrothermal vent. The outer sulfide wall is composed mainly of colloform Fe sulfide and Fe-poor sphalerite deposited under lower-temperature conditions whereby sea water and hydrothermal fluid mix above the discharge point. With continued sulfide deposition, the wall inhibits mixing of sea water and hydrothermal fluid. Inside the wall, the intensifying hydrothermal system deposits a higher-temperature assemblage of granular Fe-rich sphalerite, wurtzite, pyrite, and minor Cu-Fe sulfide. The zonation in wurtzite from Fe-rich cores to Fe-poor rims may result from a late-stage cooling of the hydrothermal fluid and(or) a change in fluid chemistry. The sulfide wall grows outward where a rupture in it permits the escape of high-temperature fluid and then deposition of a secondary shell over the breakthrough point. As temperature increases, earlier-formed minerals dissolve, and Zn, Fe, and Pb migrate toward the outer sulfide wall. Tube worms flourished in the outer wall of type A samples, and abandoned tube structures served as conduits for the late-stage hydrothermal fluids. Type B sulfide samples are subrounded, spongy-textured fragments composed almost entirely of dendritic aggregates of pale, Fe-poor colloform sphalerite and opaline silica. This type of sulfide is deposited in open space by moderate- to low-temperature fluid discharging at a slow but variable rate; the fluid becomes increasingly oxidizing, resulting in late-stage deposition of hematite, barite, and sulfur. Type B samples show little evidence of burrowing animals; this type of sulfide may be deposited in settings peripheral to sites of focused discharge.

Geological Society of America Bulletin↗
USGS1998

Pleistocene to Holocene contrasts in organic matter production and preservation on the California continental margin

Organic matter in sediments from cores collected from the upper continental slope (200–2700 m) off California and southern Oregon shows marked differences in concentration and marine character between the last glacial interval (ca. 24–10 ka) and either Holocene time or last interstadial (oxygen isotope stage 3, ca. 60–24 ka). In general, sediments deposited during Holocene time and stage 3 contain higher amounts of marine organic matter than those deposited during the last glacial interval, and this contrast is greatest in cores collected off southern California. The most profound differences in stage 3 sediments are between predominantly bioturbated sediments and occasional interbeds of laminated sediments. The sediments are from cores collected within the present oxygen minimum zone on the upper continental slope from as far north as the Oregon-California border to as far south as Point Conception. These upper Pleistocene laminated sediments contain more abundant hydrogen-rich (type II) marine algal organic matter than even surface sediments that have large amounts of nonrefractory organic matter. The stable carbon-isotopic composition of the organic matter does not change with time between bioturbated and laminated sediments, indicating that the greater abundance of type II organic matter in the laminated sediments is not due to a change in source but rather represents a greater degree of production and preservation of marine organic matter. The presence of abundant, well-preserved organic matter supports the theory that the oxygen minimum zone in the northeastern Pacific Ocean was more intense, and possibly anoxic, during late Pleistocene time as a result of increased coastal upwelling that enhanced algal productivity.

California↗
USGS2021

Middle and late Pleistocene pluvial history of Newark Valley, central Nevada, USA

Newark Valley lies between the two largest pluvial lake systems in the Great Basin, Lake Lahontan and Lake Bonneville. Soils and geomorphology, stratigraphic interpretations, radiocarbon ages, and amino acid racemization geochronology analyses were employed to interpret the relative and numerical ages of lacustrine deposits in the valley. The marine oxygen isotope stage (MIS) 2 beach barriers are characterized by well-preserved morphology and deposits with youthful soil development, with Bwk horizons and maximum stage I+ carbonate morphology. Radiocarbon ages of gastropods and tufas within these MIS 2–age deposits permit construction of a latest Pleistocene lake-level curve for Newark Valley, including a maximum limiting age of 13,780 ± 50 14 C yr B.P. for the most recent highstand, and they provide a calibration point for soil development in lacustrine deposits in the central Great Basin. The MIS 8–age to MIS 4–age beach barriers are higher in elevation and represent a larger lake than existed during MIS 2. The beach barriers have subdued morphology, are only preserved in short segments, and have stronger soil development, with Bkm and/or Bkmt horizons and maximum stage III+ to IV carbonate morphology. Newark Lake reached elevations higher than the MIS 2 highstand during at least two additional pluvial periods, MIS 16 and MIS 12, 10, or 8. These oldest lacustrine deposits do not have preserved shoreline features and are represented only by gravel lags, buried deposits, and buried soils with similar strong soil development. This sequence of middle and latest Pleistocene shorelines records a long-term pluvial history in this basin that remained internally drained for the last four or more pluvial cycles. Obtaining numerical ages from material within lacustrine deposits in the Great Basin can be challenging. Amino acid D/L values from gastropod shells and mollusk valves proved to be a valuable tool to correlate lacustrine deposits within Newark Valley. Comparison of soils and geomorphology results to independent 36 Cl cosmogenic nuclide ages from a different study indicated unexpected changes in rates of soil development during the past ~200,000 yr and suggested that common stratigraphic changes in lake stratigraphy could obscure incremental changes in soil development and/or complicate 36 Cl cosmogenic nuclide age estimates.

Nevada↗
USGS2013

Modeling volcano growth on the Island of Hawaii: Deep-water perspectives

Recent ocean-bottom geophysical surveys, dredging, and dives, which complement surface data and scientific drilling at the Island of Hawaii, document that evolutionary stages during volcano growth are more diverse than previously described. Based on combining available composition, isotopic age, and geologically constrained volume data for each of the component volcanoes, this overview provides the first integrated models for overall growth of any Hawaiian island. In contrast to prior morphologic models for volcano evolution (preshield, shield, postshield), growth increasingly can be tracked by age and volume (magma supply), defining waxing alkalic, sustained tholeiitic, and waning alkalic stages. Data and estimates for individual volcanoes are used to model changing magma supply during successive compositional stages, to place limits on volcano life spans, and to interpret composite assembly of the island. Volcano volumes vary by an order of magnitude; peak magma supply also varies sizably among edifices but is challenging to quantify because of uncertainty about volcano life spans. Three alternative models are compared: (1) near-constant volcano propagation, (2) near-equal volcano durations, (3) high peak-tholeiite magma supply. These models define inconsistencies with prior geodynamic models, indicate that composite growth at Hawaii peaked ca. 800–400 ka, and demonstrate a lower current rate. Recent age determinations for Kilauea and Kohala define a volcano propagation rate of 8.6 cm/yr that yields plausible inception ages for other volcanoes of the Kea trend. In contrast, a similar propagation rate for the less-constrained Loa trend would require inception of Loihi Seamount in the future and ages that become implausibly large for the older volcanoes. An alternative rate of 10.6 cm/yr for Loa-trend volcanoes is reasonably consistent with ages and volcano spacing, but younger Loa volcanoes are offset from the Kea trend in age-distance plots. Variable magma flux at the Island of Hawaii, and longer-term growth of the Hawaiian chain as discrete islands rather than a continuous ridge, may record pulsed magma flow in the hotspot/plume source.

Hawai'i↗
USGS2015

Ignimbrites to batholiths: integrating perspectives from geological, geophysical, and geochronological data

Multistage histories of incremental accumulation, fractionation, and solidification during construction of large subvolcanic magma bodies that remained sufficiently liquid to erupt are recorded by Tertiary ignimbrites, source calderas, and granitoid intrusions associated with large gravity lows at the Southern Rocky Mountain volcanic field (SRMVF). Geophysical data combined with geological constraints and comparisons with tilted plutons and magmatic-arc sections elsewhere are consistent with the presence of vertically extensive (>20 km) intermediate to silicic batholiths (with intrusive:extrusive ratios of 10:1 or greater) beneath the major SRMVF volcanic loci (Sawatch, San Juan, Questa-Latir). Isotopic data require involvement of voluminous mantle-derived mafic magmas on a scale equal to or greater than that of the intermediate to silicic volcanic and plutonic rocks. Early waxing-stage intrusions (35–30 Ma) that fed intermediate-composition central volcanoes of the San Juan locus are more widespread than the geophysically defined batholith; these likely heated and processed the crust, preparatory for ignimbrite volcanism (32–27 Ma) and large-scale upper-crustal batholith growth. Age and compositional similarities indicate that SRMVF ignimbrites and granitic intrusions are closely related, but the extent to which the plutons record remnants of former magma reservoirs that lost melt to volcanic eruptions has been controversial. Published Ar/Ar-feldspar and U-Pb-zircon ages for plutons spatially associated with ignimbrite calderas document final crystallization of granitoid intrusions at times indistinguishable from the tuff to ages several million years younger. These ages also show that SRMVF caldera-related intrusions cooled and solidified soon after zircon crystallization, as magma supply waned. Some researchers interpret these results as recording pluton assembly in small increments that crystallized rapidly, leading to temporal disconnects between ignimbrite eruption and intrusion growth. Alternatively, crystallization ages of the granitic rocks are here inferred to record late solidification, after protracted open-system evolution involving voluminous mantle input, lengthy residence (10 5 –10 6 yr) as near-solidus crystal mush, and intermittent separation of liquid to supply volcanic eruptions. The compositions of the least-evolved ignimbrite magmas tend to merge with those of caldera-related plutons, suggesting that the plutons record nonerupted parts of long-lived cogenetic magmatic systems, variably modified prior to final solidification. Precambrian-source zircons are scarce in caldera plutons, in contrast to their abundance in some peripheral waning-stage intrusions of the SRMVF, implying dissolution of inherited crustal zircon during lengthy magma assembly for the ignimbrite eruptions and construction of a subvolcanic batholith. Broad age spans of zircons (to several million years) from individual samples of some ignimbrites and intrusions, commonly averaged and interpreted as “intrusion-emplacement age,” alternatively provide an incomplete record of intermittent crystallization during protracted incremental magma-body assembly, with final solidification only when the system began to wane. Analyses of whole zircons cannot resolve late stages of crystal growth, and early growth in a long-lived magmatic system may be poorly recorded due to periods of zircon dissolution. Overall, construction of a batholith can take longer than recorded by zircon-crystallization ages, while the time interval for separation and shallow assembly of eruptible magma may be much shorter. Magma-supply estimates (from ages and volcano-plutonic volumes) yield focused intrusion-assembly rates sufficient to generate ignimbrite-scale volumes of eruptible magma, based on published thermal models. Mid-Tertiary processes of batholith assembly associated with the SRMVF caused drastic chemical and physical reconstruction of the entire lithosphere, probably accompanied by asthenospheric input.

Colorado, New Mexico↗
USGS1968

Resurgent cauldrons

Resurgent cauldrons are defined as cauldrons (calderas) in which the cauldron block, following subsidence, has been uplifted, usually in the form of a structural dome. Seven of the best known resurgent cauldrons are: Valles, Toba, Creede, San Juan, Silverton, Lake City, and Timber Mountain. Geologic summaries of these and Long Valley, California, a probable resurgent caldera, are presented. Using the Valles caldera as a model, but augmented by information from other cauldrons, seven stages of volcanic, structural, sedimentary, and plutonic events are recognized in the development of resurgent cauldrons. They are: (I) Regional tumescence and generation of ring fractures; (II) Calderaforming eruptions; (III) Caldera collapse; (IV) Preresurgence volcanism and sedimentation; (V) Resurgent doming; (VI) Major ring-fracture volcanism; (VII) Terminal solfatara and hot-spring activity. These stages define the terminal cycle of resurgent cauldrons, which in the Valles caldera spanned more than 1 million years. The known and inferred occurrence of the seven stages in the eight cauldrons discussed, together with some time control in four cauldrons, indicates that resurgent doming is early in the postcollapse history; hence, it seems part of a pattern and not fortuitous. Doming of the cauldron block by magma pressure is preferred to doming by stock or laccolithic intrusion, although these processes may be subsidiary. Magma rise that produces doming may be explained in several ways, but the principal cause is not known. Nor is it known why some otherwise similar calderas do not have resurgent domes, although size and thickness of the cauldron block and the degree to which it was deformed during caldera collapse may be factors. All known resurgent structures are larger than 8 miles in diameter and are associated with silicic and, presumably, high-viscosity magmas. Genetically, resurgent cauldrons belong to a cauldron group in which subsidence of a central mass takes place along ring fractures and is related to eruption of voluminous ash flows, thereby differing from Kilauean-type calderas. It is proposed that typical Krakatoan-type calderas differ in that collapse is chaotic and ring fractures are not essential to their formation. Krakatoan calderas typically occur in the andesitic volcanoes of island arcs or the eugeosynclinal environment, and their sub-volcanic analogues are not known, whereas resurgent and related Glen Coe-type cauldrons are more common in cratonic or post-orogenic environments as are their sub-volcanic analogues - granitic ring complexes. Granitic ring complexes, such as Lirue, Sande, Ossipee, and Alnsj0, are probably the closest sub-volcanic analogues of resurgent calderas. The source areas of most of the ash-flow sheets of western United States and Mexico are yet to be found. It is suggested that many of them will prove to be resurgent structures. Present evidence suggests that ore deposits are more commonly associated with resurgent cauldrons than with other cauldron types.

Memoir of the Geological Society of America↗
USGS1968

Biostratigraphic classification of the marine Triassic in North America

Ammonoid faunas representative of every major part of Triassic time occur at one place or another in the marine Triassic strata of western and arctic North America. Though some intracontinental provincialism is evident, particularly among Lower and Middle Triassic ammonoid faunas, various local sections where parts of the faunal sequence are preserved—sections in southeastern Idaho, western Nevada, northern California, northeastern Oregon, northeastern British Columbia, southwestern British Columbia, southeastern and southern Alaska, and the Arctic Islands of Canada—can be pieced together in overlapping fashion into a unified sequential framework of biostratigraphic units presented in an annotated zonal chart. At least 35 zonal units of demonstrably different age are now recognized; these units are apportioned among the Griesbachian, Dienerian, Smithian, and Spathian Stages of the Lower Triassic; the Anisian and Ladinian Stages of the Middle Triassic; and the Karnian, Norian and Rhaetian Stages of the Upper Triassic. This zonation based on North American ammonoid faunas for the first time provides an objective and reasonably detailed standard of reference for expressing the age and correlation of the marine Triassic rocks of Canada and the United States.

Alaska, Arctic, British Columbia, California, Idah↗
USGS1992

On the age of the penultimate full glaciation of New England

Tills that discontinuously underlie the late Wisconsinan till throughout New England represent the penultimate full glaciation of the region. In southern New England, the late Wisconsinan till and the tills that locally underlie it are informally referred to as upper and lower tills, respectively. For the most part, the ages of the lower tills are not firmly established, and regional correlations between occurrences of lower till, including those on Long Island, New York, are tenuous. Where a lower till underlies deposits having limiting middle Wisconsinan radiocarbon ages (e.g., the Montauk till member of the Manhassett Formation on Long Island at Port Washington, New York, and the lower till at New Sharon, Maine), many workers have assigned the till an early Wisconsinan age. However, lower tills throughout much of New England may be Illinoian or older in age and may correlate with a lower till exposed at Sankaty Head, Nantucket Island, Massachusetts, that is pre-Sangamonian in age. The till at Sankaty Head lies below marine beds containing marine faunas indicative of sea-water temperatures both warmer and slightly cooler than those off Nantucket today and that have uranium-thorium and amino-acid racemization (AAR) age estimates suggesting a Sangamonian age (marine oxygen-isotope stage 5). The lower till at Sankaty Head and the Montauk till member on Long Island were deposited during a full glaciation of New England that was at least as extensive as the late Wisconsinan advance of the Laurentide ice. Global ice-volume data from the marine oxygen-isotope record and the late Pleistocene eustatic sea-level record inferred from raised coral terraces support an advance of this magnitude during marine oxygenisotope stage 6, but not during stage 4. An early Wisconsinan age of the southern New England lower tills and, hence, of the penultimate glaciation there is problematic in terms of the pre-Sangamonian age of the lower till on Nantucket, and in terms of the late Pleistocene global ice-volume and sea-level records. An Illinoian age for the tills and for the penultimate full glaciation of New England is compatible with all the available evidence except some equivocal radiocarbon ages and AAR age estimates.

GSA Special Papers↗