SEARCH · USGS Science

Results for “Research Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95Linked to original sources

USGS2002

Eagle collapse center: Interpretation of evidence for late Cenozoic evaporite-related deformation in the Eagle River basin, Colorado

Evaporite tectonism resulted in deformation and collapse over an area of ~2500 km2 that is referred to as the Eagle collapse center. The collapse center includes much of the Eagle and Colorado River drainage basins between Vail, Dotsero, and McCoy, Colorado. The volume loss of evaporitic rocks by dissolution in the collapse center is estimated to be nearly 1700 km3 3 . Before ca. 10 Ma, Miocene basaltic flows partly covered an extensive, nearly horizontal, low-relief surface. Parts of this surface collapsed 1.3 km near the present-day Eagle and Colorado Rivers. Remnants of this surface outside the area of collapse, such as highlands of the White River uplift, the flank of the Gore Range, and Basalt Mountain, stand at elevations of 2.9–3.6 km. The high-standing Castle Peak basaltic cap, situated near the center of the Eagle collapse center, may not have collapsed, or collapsed little. The areas of collapse lie within or nearby known and inferred limits of the Pennsylvanian Eagle Valley Evaporite (mostly halite, gypsum, and anhydrite) that was deposited in the Central Colorado trough. Our geologic mapping and research in the Eagle collapse center delineate synclinal sags in the basaltic flows with amplitudes of 0.5–1 km, sinuous and discontinuous high-angle faults that cut basaltic flows, elongate grabens, evaporite-cored anticlines, and an ellipsoidal fault system that drops a 30 km X 10 km mountain block of younger strata into evaporite. Collapse as far as 20 km from the Colorado and Eagle Rivers suggests that the greater load on evaporite beneath surrounding highlands causes lateral flow of evaporite toward anticlinal crests in river valleys. Thus, gravity-driven evaporite flow and removal of evaporite by dissolution in groundwater and by subsequent discharge to surface waters combine to produce large-scale collapse. Although most evaporite tectonism post dates the basaltic flow capped surface, local angular unconformities under this surface record earlier, possibly Laramide evaporite tectonism, and overthickened post-evaporite red beds record some late Paleozoic evaporite deformation

Colorado↗

USGS2014

Characterizing riverbed sediment using high-frequency acoustics 1: spectral properties of scattering

Bed-sediment classification using high-frequency hydro-acoustic instruments is challenging when sediments are spatially heterogeneous, which is often the case in rivers. The use of acoustic backscatter to classify sediments is an attractive alternative to analysis of topography because it is potentially sensitive to grain-scale roughness. Here, a new method is presented which uses high-frequency acoustic backscatter from multibeam sonar to classify heterogeneous riverbed sediments by type (sand, gravel,rock) continuously in space and at small spatial resolution. In this, the first of a pair of papers that examine the scattering signatures from a heterogeneous riverbed, methods are presented to construct spatially explicit maps of spectral properties from geo-referenced point clouds of geometrically and radiometrically corrected echoes. Backscatter power spectra are computed to produce scale and amplitude metrics that collectively characterize the length scales of stochastic measures of riverbed scattering, termed ‘stochastic geometries’. Backscatter aggregated over small spatial scales have spectra that obey a power-law. This apparently self-affine behavior could instead arise from morphological- and grain-scale roughnesses over multiple overlapping scales, or riverbed scattering being transitional between Rayleigh and geometric regimes. Relationships exist between stochastic geometries of backscatter and areas of rough and smooth sediments. However, no one parameter can uniquely characterize a particular substrate, nor definitively separate the relative contributions of roughness and acoustic impedance (hardness). Combinations of spectral quantities do, however, have the potential to delineate riverbed sediment patchiness, in a data-driven approach comparing backscatter with bed-sediment observations (which is the subject of part two of this manuscript).

Journal of Geophysical Research F: Earth Surface↗

USGS2010

A solute flux approach to transport in heterogeneous formations: 2. Uncertainty analysis

Uncertainty in the mass flux for advection dominated solute movement in heterogeneous porous media is investigated using the Lagrangian framework developed in paper 1 by Dagan et al. (this issue). Expressions for the covariance of the mass flux and cumulative mass flux are derived as functions of the injection volume and sampling area size relative to the scale of heterogeneity. The result is illustrated for solute advection in three types of heterogeneous porous media: stratified formations, two‐ and three‐dimensional porous media; small perturbation approximation is used for the two‐ and three‐dimensional cases. Variances of the mass flux and cumulative mass flux are evaluated as functions of the injection volume (area) scale versus log‐hydraulic conductivity integral scale. The greatest decrease in coefficient of variation (CV) of the mass flux is for the source scale 1–5 times the hydraulic conductivity integral scale; further increase in the source size decreases CV comparatively less. The variance of the cumulative mass flux (or total discharge) indicates that for the source size of 20 hydraulic conductivity integral scales, the transport conditions are almost ergodic. The present results also indicate that the cumulative mass flux is a relatively robust quantity for describing field‐scale solute transport.

Water Resources Research↗

USGS1972

Limnology and fish ecology of sockeye salmon nursery lakes of the world

Many important, recently glaciated oligotrophic lakes that lie in coastal regions around the northern rim of the Pacific Ocean produce anadromous populations of sockeye salmon, Oncorhynchus nerka. This paper describes the limnology and fish ecology of two such lakes in British Columbia, five in Alaska, and one in Kamchatka. Then we discuss the following general topics: the biogenic eutrophication of nursery lakes from the nutrients released from salmon carcasses wherein during years of highest numbers of spawners, lake phosphate balances in Lakes Babine, Iliamna, and Dalnee are significantly affected; the use of nursery lakes by young sockeye that reveals five patterns related to size and configuration of lake basins and the distribution of spawning areas; the interactions between various life history stages of sockeye salmon and such resident predators, competitors, and prey as Arctic char, lake trout, Dolly Varden, cutthroat trout, lake whitefish, pygmy whitefish, pond smelt, sticklebacks, and sculpins; the self-regulation of sockeye salmon abundance in these nursery lakes as controlled by density-dependent processes; the interrelations between young sockeye salmon biomass and growth rates, and zooplankton abundance in Babine Lake; and finally, the diel, vertical, pelagial migratory behavior of young sockeye in Babine Lake and the new hypothesis dealing with bioenergetic conservation.

Journal of the Fisheries Research Board of Canada↗

USGS1987

Overview of the land analysis system (LAS)

The Land Analysis System (LAS) is a fully integrated digital analysis system designed to support remote sensing, image processing, and geographic information systems research. LAS is being developed through a cooperative effort between the National Aeronautics and Space Administration Goddard Space Flight Center and the U. S. Geological Survey Earth Resources Observation Systems (EROS) Data Center. LAS has over 275 analysis modules capable to performing input and output, radiometric correction, geometric registration, signal processing, logical operations, data transformation, classification, spatial analysis, nominal filtering, conversion between raster and vector data types, and display manipulation of image and ancillary data. LAS is currently implant using the Transportable Applications Executive (TAE). While TAE was designed primarily to be transportable, it still provides the necessary components for a standard user interface, terminal handling, input and output services, display management, and intersystem communications. With TAE the analyst uses the same interface to the processing modules regardless of the host computer or operating system. LAS was originally implemented at EROS on a Digital Equipment Corporation computer system under the Virtual Memorial System operating system with DeAnza displays and is presently being converted to run on a Gould Power Node and Sun workstation under the Berkeley System Distribution UNIX operating system.

Conference Paper↗

USGS2011

A working environment for digital planetary data processing and mapping using ISIS and GRASS GIS

Since the beginning of planetary exploration, mapping has been fundamental to summarize observations returned by scientific missions. Sensor-based mapping has been used to highlight specific features from the planetary surfaces by means of processing. Interpretative mapping makes use of instrumental observations to produce thematic maps that summarize observations of actual data into a specific theme. Geologic maps, for example, are thematic interpretative maps that focus on the representation of materials and processes and their relative timing. The advancements in technology of the last 30 years have allowed us to develop specialized systems where the mapping process can be made entirely in the digital domain. The spread of networked computers on a global scale allowed the rapid propagation of software and digital data such that every researcher can now access digital mapping facilities on his desktop. The efforts to maintain planetary missions data accessible to the scientific community have led to the creation of standardized digital archives that facilitate the access to different datasets by software capable of processing these data from the raw level to the map projected one. Geographic Information Systems (GIS) have been developed to optimize the storage, the analysis, and the retrieval of spatially referenced Earth based environmental geodata; since the last decade these computer programs have become popular among the planetary science community, and recent mission data start to be distributed in formats compatible with these systems. Among all the systems developed for the analysis of planetary and spatially referenced data, we have created a working environment combining two software suites that have similar characteristics in their modular design, their development history, their policy of distribution and their support system. The first, the Integrated Software for Imagers and Spectrometers (ISIS) developed by the United States Geological Survey, represents the state of the art for processing planetary remote sensing data, from the raw unprocessed state to the map projected product. The second, the Geographic Resources Analysis Support System (GRASS) is a Geographic Information System developed by an international team of developers, and one of the core projects promoted by the Open Source Geospatial Foundation (OSGeo). We have worked on enabling the combined use of these software systems throughout the set-up of a common user interface, the unification of the cartographic reference system nomenclature and the minimization of data conversion. Both software packages are distributed with free open source licenses, as well as the source code, scripts and configuration files hereafter presented. In this paper we describe our work done to merge these working environments into a common one, where the user benefits from functionalities of both systems without the need to switch or transfer data from one software suite to the other one. Thereafter we provide an example of its usage in the handling of planetary data and the crafting of a digital geologic map. ?? 2010 Elsevier Ltd. All rights reserved.

Conference Paper↗

USGS2013

Wind erosion from a sagebrush steppe burned by wildfire: measurements of PM 10 and total horizontal sediment flux

Wind erosion and aeolian transport processes are under studied compared to rainfall-induced erosion and sediment transport on burned landscapes. Post-ﬁre wind erosion studies have predominantly focused on near-surface sediment transport and associated impacts such as on-site soil loss and site fertility. Downwind impacts, including air quality degradation and deposition of dust or contaminants, are also likely post-ﬁre effects; however, quantitative ﬁeld measurements of post-ﬁre dust emissions are needed for assessment of these downwind risks. A wind erosion monitoring system was installed immediately following a desert sagebrush and grass wildﬁre in southeastern Idaho, USA to measure wind erosion from the burned landscape. This paper presents measurements of horizontal sediment ﬂux and PM 10 vertical ﬂux from the burned area. We determined threshold wind speeds and corresponding threshold friction velocities to be 6.0 and 20 m s -1 , respectively, for the 4 months immediately following the ﬁre and 10 and 0.55 m s -1 for the following spring months. Several major wind erosion events were measured in the months following the July 2010 Jefferson Fire. The largest wind erosion event occurred in early September 2010 and produced 1495 kg m -1 of horizontal sediment transport within the ﬁrst 2 m above the soil surface, had a maximum PM 10 vertical ﬂux of 100 mg m -2 s -1 , and generated a large dust plume that was visible in satellite imagery. The peak PM 10 concentration measured on-site at a height of 2 m in the downwind portion of the burned area was 690 mg m -3 . Our results indicate that wildﬁre can convert a relatively stable landscape into one that is a major dust source.

Idaho↗

USGS2008

Monte Carlo method for determining earthquake recurrence parameters from short paleoseismic catalogs: Example calculations for California

Paleoearthquake observations often lack enough events at a given site to directly define a probability density function (PDF) for earthquake recurrence. Sites with fewer than 10-15 intervals do not provide enough information to reliably determine the shape of the PDF using standard maximum-likelihood techniques (e.g., Ellsworth et al., 1999). In this paper I present a method that attempts to fit wide ranges of distribution parameters to short paleoseismic series. From repeated Monte Carlo draws, it becomes possible to quantitatively estimate most likely recurrence PDF parameters, and a ranked distribution of parameters is returned that can be used to assess uncertainties in hazard calculations. In tests on short synthetic earthquake series, the method gives results that cluster around the mean of the input distribution, whereas maximum likelihood methods return the sample means (e.g., NIST/SEMATECH, 2006). For short series (fewer than 10 intervals), sample means tend to reflect the median of an asymmetric recurrence distribution, possibly leading to an overestimate of the hazard should they be used in probability calculations. Therefore a Monte Carlo approach may be useful for assessing recurrence from limited paleoearthquake records. Further, the degree of functional dependence among parameters like mean recurrence interval and coefficient of variation can be established. The method is described for use with time-independent and time-dependent PDFs, and results from 19 paleoseismic sequences on strike-slip faults throughout the state of California are given.

Journal of Geophysical Research B: Solid Earth↗

USGS2010

Dating of shallow groundwater: Comparison of the transient tracers 3H/3He, chlorofluorocarbons, and 85Kr

This paper describes a direct comparison of apparent ages derived from 3 H/ 3 He, chlorofluorocarbons (CCl 3 F and CCl 2 F 2 ), and 85 Kr measurements in shallow groundwater. Wells chosen for this study are completed in the unconfined surficial aquifers in late Cenozoic Atlantic Coastal Plain sediments of the Delmarva Peninsula, on the east coast of the United States. Most of the apparent tracer ages agree within 2 years of each other for recharge dates between 1965 and 1990. Discrepancies in apparent tracer ages usually can be explained by hydrological processes such as mixing in a discharge area. Recharge rate calculations based on apparent tracer age gradients at multilevel well locations agree with previous recharge estimates. High recharge rates on the Delmarva Peninsula result in nearly complete dissolved-gas confinement in the groundwater. The remarkable agreement between the different tracer ages indicates negligible mixing of waters of different ages, insignificant dispersion, minimal gas loss to the atmosphere, and insignificant sorption-desorption processes at this location.

Water Resources Research↗

USGS1998

Detecting influential observations in nonlinear regression modeling of groundwater flow

Nonlinear regression is used to estimate optimal parameter values in models of groundwater flow to ensure that differences between predicted and observed heads and flows do not result from nonoptimal parameter values. Parameter estimates can be affected, however, by observations that disproportionately influence the regression, such as outliers that exert undue leverage on the objective function. Certain statistics developed for linear regression can be used to detect influential observations in nonlinear regression if the models are approximately linear. This paper discusses the application of Cook's D , which measures the effect of omitting a single observation on a set of estimated parameter values, and the statistical parameter DFBETAS, which quantifies the influence of an observation on each parameter. The influence statistics were used to (1) identify the influential observations in the calibration of a three-dimensional, groundwater flow model of a fractured-rock aquifer through nonlinear regression, and (2) quantify the effect of omitting influential observations on the set of estimated parameter values. Comparison of the spatial distribution of Cook's D with plots of model sensitivity shows that influential observations correspond to areas where the model heads are most sensitive to certain parameters, and where predicted groundwater flow rates are largest. Five of the six discharge observations were identified as influential, indicating that reliable measurements of groundwater flow rates are valuable data in model calibration. DFBETAS are computed and examined for an alternative model of the aquifer system to identify a parameterization error in the model design that resulted in overestimation of the effect of anisotropy on horizontal hydraulic conductivity.

Water Resources Research↗

USGS2024

U.S. Geological Survey Grand Canyon Monitoring and Research Center: Proceedings of the fiscal year 2023 annual reporting meeting to the Glen Canyon Dam Adaptive Management Program

This proceedings is prepared for the USBR and Glen Canyon Dam Adaptive Management Program (GCDAMP) to account for work conducted and products delivered in FY 2023 by SBSC's Grand Canyon Monitoring and Research Center (GCMRC) and to inform the Technical Work Group of science conducted by GCMRC and its cooperators in support of the GCDAMP. It includes a summary of accomplishments, modifications to work plans, and results related to projects included in GCMRC’s FY 2021-23 Triennial Work Plan. This work was done to support the 11 resource goals identified in the Glen Canyon Dam Long-Term Experimental and Management Plan (LTEMP) Environmental Impact Statement and Record of Decision.

Arizona, Nevada, Utah↗

USGS2015

Wildlife specimen collection, preservation, and shipment

Specimens are used to provide supporting information leading to the determination of the cause of disease or death in wildlife and for disease monitoring or surveillance. Commonly used specimens for wildlife disease investigations include intact carcasses, tissues from carcasses, euthanized or moribund animals, parasites, ingested food, feces, or environmental samples. Samples from live animals or the environment (e.g., contaminated feed) in the same vicinity as a mortality event also may be helpful. The type of specimen collected is determined by availability of samples and biological objectives. Multiple fresh, intact carcasses from affected species are the most useful in establishing a cause for a mortality event. Submission of entire carcasses allows observation of gross lesions and abnormalities, as well as disease testing of multiple tissues. Samples from live animals may be more appropriate when sick animals cannot be euthanized (e.g., threatened or endangered species) or for research and monitoring projects examining disease or agents circulating in apparently healthy animals or those not exhibiting clinical signs. Samples from live animals may include collections of blood, hair, feathers, feces, or ectoparasites, or samples obtained by swabbing lesions or orifices. Photographs and videos are useful additions for recording field and clinical signs and conveying conditions at the site. Collection of environmental samples (e.g., feces, water, feed, or soil) may be appropriate when animals cannot be captured for sampling or the disease agent may persist in the environment. If lethal collection is considered necessary, biologists should refer to the policies, procedures, and permit requirements of their institution/facility and the agency responsible for species management (U.S. Fish and Wildlife Service or State natural resource agency) prior to use in the field. If threatened or endangered species are found dead, or there is evidence of illegal take, field personal should contact local wildlife law enforcement authorities immediately and prior to handling the carcass. Prior to collecting samples, it is important to determine the capabilities and submission criteria of the laboratory receiving the samples. Some laboratories may specialize in a limited number of tests, be equipped to accept only certain types of tissues (instead of entire carcasses), or specialize in particular species or group of animals (e.g., reptiles, birds, mammals). Diagnostic laboratories have specific requirements regarding preparation, labeling, and shipping of samples. Adherence to these requirements helps ensure the usefulness of any submitted specimens. Although laboratories may vary in the cost and turnaround times for diagnostic tests, some laboratories may be able to prioritize samples and accommodate accelerated time frames if communicated at the time of submission. Keeping a prepacked kit with basic carcass-collection supplies, including a paper copy of the specimen history form (available for download from the Web sites of most diagnostic laboratories), in the office or vehicle will decrease the chances of forgetting an essential item and decrease response time for arriving at an event.

Techniques and Methods↗

USGS2010

Ground surface deformation patterns, magma supply, and magma storage at Okmok volcano, Alaska, from InSAR analysis: 2. Coeruptive deflation, July-August 2008

A hydrovolcanic eruption near Cone D on the floor of Okmok caldera, Alaska, began on 12 July 2008 and continued until late August 2008. The eruption was preceded by inflation of a magma reservoir located beneath the center of the caldera and ∼3 km below sea level (bsl), which began immediately after Okmok's previous eruption in 1997. In this paper we use data from several radar satellites and advanced interferometric synthetic aperture radar (InSAR) techniques to produce a suite of 2008 coeruption deformation maps. Most of the surface deformation that occurred during the eruption is explained by deflation of a Mogi-type source located beneath the center of the caldera and 2–3 km bsl, i.e., essentially the same source that inflated prior to the eruption. During the eruption the reservoir deflated at a rate that decreased exponentially with time with a 1/ e time constant of ∼13 days. We envision a sponge-like network of interconnected fractures and melt bodies that in aggregate constitute a complex magma storage zone beneath Okmok caldera. The rate at which the reservoir deflates during an eruption may be controlled by the diminishing pressure difference between the reservoir and surface. A similar mechanism might explain the tendency for reservoir inflation to slow as an eruption approaches until the pressure difference between a deep magma production zone and the reservoir is great enough to drive an intrusion or eruption along the caldera ring-fracture system.

Alaska↗

USGS2021

DAS 3DVSP survey at Stratigraphic Test Well (Hydrate-01)

This proceeding outlines the acquisition, processing, and fault interpretation of the largest known onshore distributed acoustic sensing (DAS) 3D vertical seismic profile (VSP) survey. This survey was carried out to detect the distribution of faults near the gas hydrate research well (Stratigraphic Test Well: Hydrate-01) on the North Slope of Alaska within the Prudhoe Bay Unit (PBU). The data were recorded with a single-mode DAS cable which is permanently installed and cemented behind the casing of the Hydrate-01 well. A total of 1701 shot records were successfully acquired in 12 days using a DAS interrogator with two vibroseis sources. The data were converted from strain rate to a geophone equivalent for further data processing. Traveltime tomography was carried out using the first break of each shot and was used to build a 3D tilted transverse isotropy (TTI) velocity model. The data were processed with a sequence designed to produce a precise and high resolution P wave image, that included editing, redatum, band pass filtering, denoise, upgoing / downgoing wavefield separation, deconvolution and migration. Faults around the Hydrate-01 were interpreted using the 3DVSP volume and its attributes. These faults were clearly observed in the 3DVSP volume but they cannot be recognized by an existing 3D surface seismic volume.

Conference Paper↗

USGS2023

Automated mapping of culverts, bridges, and dams

Accurate maps of built structures around stream channels, such as dams, culverts, and bridges, are vital in monitoring infrastructure, risk management, and hydrologic modeling. Hydrologic modeling is essential for research and decisionmaking related to infrastructure and development planning, emergency management, ecology, and developing hydrographic data. Technological advances in remote sensing afford increasingly fine-scale elevation data, such as the U.S. Geological Survey 1-meter digital elevation models (DEMs), that can accurately model the Earth’s surface characteristics and related hydrologic dynamics. A long-standing challenge in flow modeling is the presence of built structures in an elevation model that resist flow in a way that does not reflect actual dynamics, such as culverts, bridges, and dams. This challenge is exacerbated in fine-scale elevation data as more built structures are resolved. Here we present a test of the extensibility of a culvert and dam detection workflow, culvert-net (CN). CN was developed using a large dataset of field-validated culverts, bridges, and dam locations for Alexander County, North Carolina, USA, supplemented by manual review and identification of additional features. In this workflow, the CN model is tested on a new study area in western Michigan, USA, where culverts and associated hydrography have recently been manually compiled.

Conference Paper↗

USGS2012

Canadian SAR remote sensing for the Terrestrial Wetland Global Change Research Network (TWGCRN)

The Canada Centre for Remote Sensing (CCRS) has more than 30 years of experience investigating the use of SAR remote sensing for many applications related to terrestrial water resources. Recently, CCRS scientists began contributing to the Terrestrial Wetland Global Change Research Network (TWGCRN), a bi-national research network dedicated to assessing impacts of global change on interconnected wetland-upland landscapes across a vital portion of North America. CCRS scientists are applying SAR remote sensing to characterize wetland components of these landscapes in three ways. First, they are using a comprehensive set of RADARSAT-2 SAR data collected during April to September 2009 to extract multi-temporal surface water information for key TWGCRN study landscapes in North America. Second, they are analyzing polarimetric RADARSAT-2 data to determine areas where double-bounce represents the primary scattering mechanism and is indicative of flooded vegetation in these landscapes. Third, they are testing advanced interferometric SAR techniques to estimate water levels with RADARSAT-2 Fine Quad polarimetric image pairs. The combined information from these three SAR analysis activities will provide TWGCRN scientists with an integrated view and monitoring capability for these dynamic wetland-upland landscapes. These data are being used in conjunction with other remote sensing and field data to study interactions between landscape and animal (birds and amphibians) responses to climate/global change.

Conference Paper↗

USGS2014

Inference of strata separation and gas emission paths in longwall overburden using continuous wavelet transform of well logs and geostatistical simulation

Prediction of potential methane emission pathways from various sources into active mine workings or sealed gobs from longwall overburden is important for controlling methane and for improving mining safety. The aim of this paper is to infer strata separation intervals and thus gas emission pathways from standard well log data. The proposed technique was applied to well logs acquired through the Mary Lee/Blue Creek coal seam of the Upper Pottsville Formation in the Black Warrior Basin, Alabama, using well logs from a series of boreholes aligned along a nearly linear profile. For this purpose, continuous wavelet transform (CWT) of digitized gamma well logs was performed by using Mexican hat and Morlet, as the mother wavelets, to identify potential discontinuities in the signal. Pointwise Hölder exponents (PHE) of gamma logs were also computed using the generalized quadratic variations (GQV) method to identify the location and strength of singularities of well log signals as a complementary analysis. PHEs and wavelet coefficients were analyzed to find the locations of singularities along the logs. Using the well logs in this study, locations of predicted singularities were used as indicators in single normal equation simulation (SNESIM) to generate equi-probable realizations of potential strata separation intervals. Horizontal and vertical variograms of realizations were then analyzed and compared with those of indicator data and training image (TI) data using the Kruskal–Wallis test. A sum of squared differences was employed to select the most probable realization representing the locations of potential strata separations and methane flow paths. Results indicated that singularities located in well log signals reliably correlated with strata transitions or discontinuities within the strata. Geostatistical simulation of these discontinuities provided information about the location and extents of the continuous channels that may form during mining. If there is a gas source within their zone of influence, paths may develop and allow methane movement towards sealed or active gobs under pressure differentials. Knowledge gained from this research will better prepare mine operations for potential methane inflows, thus improving mine safety.

Journal of Applied Geophysics↗

USGS2005

Influence of sediment storage on downstream delivery of contaminated sediment

Sediment storage in alluvial valleys can strongly modulate the downstream migration of sediment and associated contaminants through landscapes. Traditional methods for routing contaminated sediment through valleys focus on in‐channel sediment transport but ignore the influence of sediment exchanges with temporary sediment storage reservoirs outside the channel, such as floodplains. In theory, probabilistic analysis of particle trajectories through valleys offers a useful strategy for quantifying the influence of sediment storage on the downstream movement of contaminated sediment. This paper describes a field application and test of this theory, using 137 Cs as a sediment tracer over 45 years (1952–1997), downstream of a historical effluent outfall at the Los Alamos National Laboratory (LANL), New Mexico. The theory is parameterized using a sediment budget based on field data and an estimate of the 137 Cs release history at the upstream boundary. The uncalibrated model reasonably replicates the approximate magnitude and spatial distribution of channel‐ and floodplain‐stored 137 Cs measured in an independent field study. Model runs quantify the role of sediment storage in the long‐term migration of a pulse of contaminated sediment, quantify the downstream impact of upstream mitigation, and mathematically decompose the future 137 Cs flux near the LANL property boundary to evaluate the relative contributions of various upstream contaminant sources. The fate of many sediment‐bound contaminants is determined by the relative timescales of contaminant degradation and particle residence time in different types of sedimentary environments. The theory provides a viable approach for quantifying the long‐term movement of contaminated sediment through valleys.

Water Resources Research↗