USGS Science⌕ Search

SEARCH · USGS Science

Results for “Chemical Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95Linked to original sources
USGS1989

Hydrologic and geochemical monitoring in Long Valley caldera, Mono County, California, 1986

The U.S. Geological Survey continued to monitor hydrologic and geochemical conditions in the Long Valley caldera during 1986. The monitoring is directed toward detecting changes in the hydrologic system caused by tectonic or magmatic processes. Data collected during 1986 include chemical and isotopic composition of water from selected streams sites, springs, and wells; pumpage from four geothermal wells; flow rates of selected springs and stream sites; mean daily water or gas temperatures at selected sites; mean daily atmospheric pressures and water level at selected wells, and precipitation records for two sites. Seismicity within the caldera persisted at a relatively low level compared with the more active periods of 1978-84. The most significant events of seismicity that affected hydrologic monitoring sites in Long Valley during 1986 occurred during July , in response to the Chalfant Valley earthquakes, centered about 20 miles southeast of the caldera. Water level records for three wells show distinct responses to the Chalfant Valley earthquakes. (USGS)

Water-Resources Investigations Report↗
USGS2006

Health benefits of geologic materials and geologic processes

The reemerging field of Medical Geology is concerned with the impacts of geologic materials and geologic processes on animal and human health. Most medical geology research has been focused on health problems caused by excess or deficiency of trace elements, exposure to ambient dust, and on other geologically related health problems or health problems for which geoscience tools, techniques, or databases could be applied. Little, if any, attention has been focused on the beneficial health effects of rocks, minerals, and geologic processes. These beneficial effects may have been recognized as long as two million years ago and include emotional, mental, and physical health benefits. Some of the earliest known medicines were derived from rocks and minerals. For thousands of years various clays have been used as an antidote for poisons. “Terra sigillata,” still in use today, may have been the first patented medicine. Many trace elements, rocks, and minerals are used today in a wide variety of pharmaceuticals and health care products. There is also a segment of society that believes in the curative and preventative properties of crystals (talismans and amulets). Metals and trace elements are being used in some of today’s most sophisticated medical applications. Other recent examples of beneficial effects of geologic materials and processes include epidemiological studies in Japan that have identified a wide range of health problems (such as muscle and joint pain, hemorrhoids, burns, gout, etc.) that may be treated by one or more of nine chemically distinct types of hot springs, and a study in China indicating that residential coal combustion may be mobilizing sufficient iodine to prevent iodine deficiency disease.

International Journal of Environmental Research an↗
USGS1997

Sulfur isotope analyses using the laser microprobe

Since the first studies of sulfur isotope variations in natural materials (Thode, 1949), it has been apparent that there are large and dramatic variations of 34 S/ 32 S ratios and that sulfur isotope studies are a powerful tool for interpreting the origins of sulfur-bearing minerals. However, sulfur is such a common element in the Earth's crust (sixteenth most abundant, averaging 0.03 wt %; Mason, 1966), and is involved in so many igneous, hydrothermal, biological, and surficial processes that a simple measurement of δ 34 S, without constraining geological, biological, and geochemical data, is often unenlightening. In many sedimentary and hydrothermal systems, geologists are confronted with multiple sulfur sources, large fractionations of sulfur isotopes during oxidation-reduction reactions that sometimes produce disequilibrium effects, and strong chemical and physical gradients at the site of mineral deposition. Despite significant advances in the understanding and utilization of sulfur isotopes to characterize ore-forming processes (Ohmoto, 1972; Ohmoto and Rye, 1979; Shanks et al., 1981; Janecky and Shanks, 1988), interpretations may be ambiguous and, in ancient ore deposits, difficult to test. Part of this difficulty has been due to an inability to resolve fine-scale spatial variations in isotopic fractionation between successive zones or between coexisting minerals.

Book chapter↗
USGS1974

Developing a state water plan: Ground-water conditions in Utah, spring of 1974

This report is the eleventh in a series of annual reports that describe ground-water conditions in Utah. Reports in this series, prepared cooperatively by the U.S. Geological Survey and the Utah Division of Water Resources, provide data to enable interested parties such as legislators, administrators, and planners to keep abreast of changing ground-water conditions. This report, like the others (see references, p. 18), contains information on well construction, ground-water withdrawals, water-level changes, and related changes in precipitation and streamflow. Supplementary data such as graphs showing chemical quality of water and maps showing water-table configuration are included in reports of this series only for those years or areas for which applicable data are available and are important to a discussion of changing ground-water conditions. The report includes individual discussions of the most important areas of ground-water withdrawal in the State for the calendar year 1973. Water-level fluctuations, however, are described for the period spring 1973 to spring 1974. Many of the data used in the report were collected by the Geological Survey in cooperation with the Division of Water Rights, Utah Department of Natural Resources.

Utah↗
USGS1968

Mineral investigations between Khamis Mushayt and Bi'r Idimah, Saudi Arabia

Mineral investigations between Khamis Mushayt and Bi'r Idimah in the Asir quadrangle, sheet 1-217 (Brown and Jackson, 1959) began September 24, 1964 and ended November 20. Total distance travelled was 6264 kilometers. Sixteen camps were set, and 483 samples of various geologic materials, principally wadi sands, laterite, and gossan, were taken. Not all the area originally scheduled to be covered was examined, owing principally to more time being spent on scheelite and laterite than originally planned. No work was done in the area covered by the two 1:50,000 mosaics numbered 9E and 8E. They will be blocked out in January 1965. The area completed includes parts or all of the 1:50,000 scale mosaics numbered 8B, 8C, 8D, 8F, 9B, 9C, 9D, and 9F. No megascopic indication of an exploitable mineral deposit of any type, except the small occurrences of marble cited in the October 1964 report and slate already in use, was discovered. A previously unknown ancient working was found, but it is small. Unless spectro-chemical analysis of samples discloses anomalously great amounts of some element, the area examined must be considered as unfavorable for ore deposits, except possibly the gossan exposed south of Bi'r Idimah.

Open-File Report↗
USGS2001

USGS Mineral Resources Program; national maps and datasets for research and land planning

The U.S. Geological Survey, the Nation’s leader in producing and maintaining earth science data, serves as an advisor to Congress, the Department of the Interior, and many other Federal and State agencies. Nationwide datasets that are easily available and of high quality are critical for addressing a wide range of land-planning, resource, and environmental issues. Four types of digital databases (geological, geophysical, geochemical, and mineral occurrence) are being compiled and upgraded by the Mineral Resources Program on regional and national scales to meet these needs. Where existing data are incomplete, new data are being collected to ensure national coverage. Maps and analyses produced from these databases provide basic information essential for mineral resource assessments and environmental studies, as well as fundamental information for regional and national land-use studies. Maps and analyses produced from the databases are instrumental to ongoing basic research, such as the identification of mineral deposit origins, determination of regional background values of chemical elements with known environmental impact, and study of the relationships between toxic elements or mining practices to human health. As datasets are completed or revised, the information is made available through a variety of media, including the Internet. Much of the available information is the result of cooperative activities with State and other Federal agencies. The upgraded Mineral Resources Program datasets make geologic, geophysical, geochemical, and mineral occurrence information at the state, regional, and national scales available to members of Congress, State and Federal government agencies, researchers in academia, and the general public. The status of the Mineral Resources Program datasets is outlined below.

Fact Sheet↗
USGS1975

Developing a state water plan: Ground-water conditions in Utah, spring of 1975

This report is the twelfth in a series of annual reports that describe ground-water conditions in Utah. Reports in this series, prepared cooperatively by the U.S. Geological Survey and the Utah Division of Water Resources, provide data to enable interested parties such as legislators, administrators, and planners to keep abreast of changing ground-water conditions. This report, like the others (see references, p. 16), contains information on well construction, ground-water withdrawals, water-level changes, and related changes in precipitation and streamflow. Supplementary data such as graphs showing chemical quality of water and maps showing water-table configuration are included in reports of this series only for those years or areas for which applicable data are available and are important to a discussion of changing ground-water conditions. The report includes individual discussions of the most important areas of ground-water withdrawal in the State for the calendar year 1974. Water-level fluctuations, however, are described for the period spring 1974 to spring 1975. Many of the data used in the report were collected by the U.S. Geological Survey in cooperation with the Division of Water Rights, Utah Department of Natural Resources.

Utah↗
USGS2021

Assessment of streamflow and water quality in the Upper Yampa River Basin, Colorado, 1992–2018

The Upper Yampa River Basin drains approximately 2,100 square miles west of the Continental Divide in north-western Colorado. There is a growing need to understand potential changes in the quantity and quality of water resources as the basin is undergoing increasing land and water development to support growing municipal, industrial, and recreational needs. The U.S. Geological Survey, in cooperation with stakeholders in the Upper Yampa River Basin water community, began a study to characterize and identify changes in streamflow and selected water-quality constituents, including suspended sediment, Kjeldahl nitrogen, total nitrogen, total phosphorus, and orthophosphate, in the basin. This study used streamflow and water-quality data from selected U.S. Geological Survey sites to provide a better understanding of how major factors, including land use, climate change, and geological features, may influence streamflow and water quality. Analysis of long-term (1910–2018) and short-term (1992–2018) records of streamflow at main-stem Yampa River and tributary sites indicate downward trends in one or more streamflow statistics, including 1-day maximum, mean, and 7-day minimum. Long-term downward trends in daily mean streamflow in April (22 percent overall) at Yampa River at Steamboat Springs, Colorado, correspond to observed changes in streamflow documented across western North America and the Colorado River Basin that are predominately associated with changes in snowmelt runoff and temperatures. During the short-term period of analysis, decreases in streamflow at main-stem Yampa River and some tributary sites are likely related to changes in consumptive use and reservoir management or, at sites with no upstream flow impoundments, changes in irrigation diversions and climate. Concentrations of water-quality constituents were typically highest in spring (March, April, and May) during the early snowmelt runoff period as material that is washed off the land surface drains into streams. Highest concentrations occurred slightly later, in May, June, and July, at Yampa River above Stagecoach Reservoir, Colo., and slightly earlier, in February and March at Yampa River at Milner, Colo., indicating that these sites may have different or additional sources of phosphorus from upstream inputs. Yampa River at Milner, Colo., and Yampa River above Elkhead Creek, Colo., had the highest net yields of suspended sediment, Kjeldahl nitrogen, and total phosphorus, and are likely influenced by land use and erosion as the basins of both of these sites are underlain by highly erodible Cretaceous shales. Upward trends in estimated Kjeldahl nitrogen and total phosphorus concentrations and loads were found at Yampa River at Steamboat Springs, Colo. From 1999 to 2018, the Kjeldahl nitrogen concentration increased by 10 percent or 0.035 milligram per liter, and load increased by 22 percent or 26 tons. Total phosphorus concentration increased by 20 percent or 0.0081 milligram per liter, and loads increased by 41 percent or 6.2 tons. Decreases in streamflow and changes in land use may contribute to these trends. During multiple summer sampling events at Stagecoach Reservoir, the physical and chemical factors indicated conditions conducive to cyanobacterial blooms, including surface-water temperatures greater than 20 degrees Celsius and total phosphorus and total nitrogen concentrations in exceedance of Colorado Department of Public Health and Environment interim concentrations for water-quality standards. Local geological features (predominately sandstones and shales) and additional inputs from upstream land use likely contribute to the elevated nutrient conditions in Stagecoach Reservoir.

Colorado↗
USGS2016

Groundwater contaminant plume maps and volumes, 100-K and 100-N Areas, Hanford Site, Washington

This study provides an independent estimate of the areal and volumetric extent of groundwater contaminant plumes which are affected by waste disposal in the 100-K and 100-N Areas (study area) along the Columbia River Corridor of the Hanford Site. The Hanford Natural Resource Trustee Council requested that the U.S. Geological Survey perform this interpolation to assess the accuracy of delineations previously conducted by the U.S. Department of Energy and its contractors, in order to assure that the Natural Resource Damage Assessment could rely on these analyses. This study is based on previously existing chemical (or radionuclide) sampling and analysis data downloaded from publicly available Hanford Site Internet sources, geostatistically selected and interpreted as representative of current (from 2009 through part of 2012) but average conditions for groundwater contamination in the study area. The study is limited in scope to five contaminants—hexavalent chromium, tritium, nitrate, strontium-90, and carbon-14, all detected at concentrations greater than regulatory limits in the past. All recent analytical concentrations (or activities) for each contaminant, adjusted for radioactive decay, non-detections, and co-located wells, were converted to log-normal distributions and these transformed values were averaged for each well location. The log-normally linearized well averages were spatially interpolated on a 50 × 50-meter (m) grid extending across the combined 100-N and 100-K Areas study area but limited to avoid unrepresentative extrapolation, using the minimum curvature geostatistical interpolation method provided by SURFER ® data analysis software. Plume extents were interpreted by interpolating the log-normally transformed data, again using SURFER ® , along lines of equal contaminant concentration at an appropriate established regulatory concentration . Total areas for each plume were calculated as an indicator of relative environmental damage. These plume extents are shown graphically and in tabular form for comparison to previous estimates. Plume data also were interpolated to a finer grid (10 × 10 m) for some processing, particularly to estimate volumes of contaminated groundwater. However, hydrogeologic transport modeling was not considered for the interpolation. The compilation of plume extents for each contaminant also allowed estimates of overlap of the plumes or areas with more than one contaminant above regulatory standards. A mapping of saturated aquifer thickness also was derived across the 100-K and 100–N study area, based on the vertical difference between the groundwater level (water table) at the top and the altitude of the top of the Ringold Upper Mud geologic unit, considered the bottom of the uppermost unconfined aquifer. Saturated thickness was calculated for each cell in the finer (10 × 10 m) grid. The summation of the cells’ saturated thickness values within each polygon of plume regulatory exceedance provided an estimate of the total volume of contaminated aquifer, and the results also were checked using a SURFER ® volumetric integration procedure. The total volume of contaminated groundwater in each plume was derived by multiplying the aquifer saturated thickness volume by a locally representative value of porosity (0.3). Estimates of the uncertainty of the plume delineation also are presented. “Upper limit” plume delineations were calculated for each contaminant using the same procedure as the “average” plume extent except with values at each well that are set at a 95-percent upper confidence limit around the log-normally transformed mean concentrations, based on the standard error for the distribution of the mean value in that well; “lower limit” plumes are calculated at a 5-percent confidence limit around the geometric mean. These upper- and lower-limit estimates are considered unrealistic because the statistics were increased or decreased at each well simultaneously and were not adjusted for correlation among the well distributions (i.e., it is not realistic that all wells would be high simultaneously). Sources of the variability in the distributions used in the upper- and lower-extent maps include time varying concentrations and analytical errors. The plume delineations developed in this study are similar to the previous plume descriptions developed by U.S. Department of Energy and its contractors. The differences are primarily due to data selection and interpolation methodology. The differences in delineated plumes are not sufficient to result in the Hanford Natural Resource Trustee Council adjusting its understandings of contaminant impact or remediation.

Washington↗
USGS1967

Northern part, Ten Mile and Taunton River basins

The northern part of the Ten Mile and Taunton River basins is an area of about 195 square miles within Norfolk, Plymouth, and Bristol Counties in southeastern Massachusetts. The northern boundary of the area (plate 1) is the drainage divide separating these basins from that of the Charles, Neponset, and Weymouth River basins. The western boundary is, for the most part, the divide separating the basins from the Blackstone River basin. The eastern boundary is at the edge of the Brockton-Pembroke area (Petersen, 1962; Petersen and Shaw, 1961). The southern boundary in Seekonk is the northern limit of the East Providence quadrangle, for which a ground-water map was prepared by Allen and Gorman (1959); eastward, the southern boundaries of the city of Attleboro and the towns of Norton, Easton, and West Bridgewater form the southern boundary of the area. This report is one of two prepared by the Geological Survey for the Water Resources Commission. The principal purpose of this report is to make available the basic data on which the other, a map showing availability of ground water, is based. This basic-data report also can be used by engineers, planners, and others interested in or responsible for water-resources planning to determine the materials to be encountered (tables 3 and 4) and the yields which may be obtained from wells and test holes (tables 1 and 2) in the stratified sand and gravel that are the principal source of ground water and in bedrock. Partial and complete chemical analyses (tables 7 and 8) of these test holes and of some privately-owned wells provide information on the general quality of the water for domestic and other uses. A tabulation of existing municipal supplies, their capacity, production (table 5), and chemical quality of the water (table 6) may be used for regional planning purposes. Water-level measurements (figure 1) can be used to determine the annual fluctuations of the water table in certain types of materials. Seismic work (table 9) in the Canoe River valley, Norton, and test drilling with a power augur (tables 2 and 4) were done for the Geological Survey as part of the investigation.

Massachusetts↗
USGS1999

Seafloor environments in the Long Island Sound estuarine system

Four categories of modern seafloor sedimentary environments have been identified and mapped across the large, glaciated, topographically complex Long Island Sound estuary by means of an extensive regional set of sidescan sonographs, bottom samples, and video-camera observations and supplemental marine-geologic and modeled physical-oceanographic data. (1) Environments of erosion or nondeposition contain sediments which range from boulder fields to gravelly coarse-to-medium sands and appear on the sonographs either as patterns with isolated reflections (caused by outcrops of glacial drift and bedrock) or as patterns of strong backscatter (caused by coarse lag deposits). Areas of erosion or nondeposition were found across the rugged seafloor at the eastern entrance of the Sound and atop bathymetric highs and within constricted depressions in other parts of the basin. (2) Environments of bedload transport contain mostly coarse-to-fine sand with only small amounts of mud and are depicted by sonograph patterns of sand ribbons and sand waves. Areas of bedload transport were found primarily in the eastern Sound where bottom currents have sculptured the surface of a Holocene marine delta and are moving these sediments toward the WSW into the estuary. (3) Environments of sediment sorting and reworking comprise variable amounts of fine sand and mud and are characterized either by patterns of moderate backscatter or by patterns with patches of moderate-to-weak backscatter that reflect a combination of erosion and deposition. Areas of sediment sorting and reworking were found around the periphery of the zone of bedload transport in the eastern Sound and along the southern nearshore margin. They also are located atop low knolls, on the flanks of shoal complexes, and within segments of the axial depression in the western Sound. (4) Environments of deposition are blanketed by muds and muddy fine sands that produce patterns of uniformly weak backscatter. Depositional areas occupy broad areas of the basin floor in the western part of the Sound. The regional distribution of seafloor environments reflects fundamental differences in marine-geologic conditions between the eastern and western parts of the Sound. In the funnel-shaped eastern part, a gradient of strong tidal currents coupled with the net nontidal (estuarine) bottom drift produce a westward progression of environments ranging from erosion or nondeposition at the narrow entrance to the Sound, through an extensive area of bedload transport, to a peripheral zone of sediment sorting. In the generally broader western part of the Sound, a weak tidal-current regime combined with the production of particle aggregates by biologic or chemical processes, cause large areas of deposition that are locally interrupted by a patchy distribution of various other environments where the bottom currents are enhanced by and interact with the seafloor topography.

Marine Geology↗
USGS2014

The effects of sample scheduling and sample numbers on estimates of the annual fluxes of suspended sediment in fluvial systems

Since the 1970s, there has been both continuing and growing interest in developing accurate estimates of the annual fluvial transport (fluxes and loads) of suspended sediment and sediment-associated chemical constituents. This study provides an evaluation of the effects of manual sample numbers (from 4 to 12 year −1 ) and sample scheduling (random-based, calendar-based and hydrology-based) on the precision, bias and accuracy of annual suspended sediment flux estimates. The evaluation is based on data from selected US Geological Survey daily suspended sediment stations in the USA and covers basins ranging in area from just over 900 km 2 to nearly 2 million km 2 and annual suspended sediment fluxes ranging from about 4 Kt year −1 to about 200 Mt year −1 . The results appear to indicate that there is a scale effect for random-based and calendar-based sampling schemes, with larger sample numbers required as basin size decreases. All the sampling schemes evaluated display some level of positive (overestimates) or negative (underestimates) bias. The study further indicates that hydrology-based sampling schemes are likely to generate the most accurate annual suspended sediment flux estimates with the fewest number of samples, regardless of basin size. This type of scheme seems most appropriate when the determination of suspended sediment concentrations, sediment-associated chemical concentrations, annual suspended sediment and annual suspended sediment-associated chemical fluxes only represent a few of the parameters of interest in multidisciplinary, multiparameter monitoring programmes. The results are just as applicable to the calibration of autosamplers/suspended sediment surrogates currently used to measure/estimate suspended sediment concentrations and ultimately, annual suspended sediment fluxes, because manual samples are required to adjust the sample data/measurements generated by these techniques so that they provide depth-integrated and cross-sectionally representative data.

Hydrological Processes↗
USGS2009

Ground-water conditions in Utah, spring of 2009

This is the forty-sixth in a series of annual reports that describe ground-water conditions in Utah. Reports in this series, published cooperatively by the U.S. Geological Survey and the Utah Department of Natural Resources, Division of Water Resources and Division of Water Rights, and the Utah Department of Environmental Quality, Division of Water Quality, provide data to enable interested parties to maintain awareness of changing ground-water conditions. This report, like the others in the series, contains information on well construction, ground-water withdrawal from wells, water-level changes, precipitation, streamflow, and chemical quality of water. Information on well construction included in this report refers only to wells constructed for new appropriations of ground water. Supplementary data are included in reports of this series only for those years or areas which are important to a discussion of changing ground-water conditions and for which applicable data are available. This report includes individual discussions of selected significant areas of ground-water development in the State for calendar year 2008. Most of the reported data were collected by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Division of Water Resources and Division of Water Rights, and the Utah Department of Environmental Quality, Division of Water Quality. This report is available online at http://www.waterrights. utah.gov/techinfo/ and http://ut.water.usgs.gov/publications/ GW2009.pdf.

Utah↗
USGS2008

Ground-water conditions in Utah, spring of 2008

This is the forty-fifth in a series of annual reports that describe ground-water conditions in Utah. Reports in this series, published cooperatively by the U.S. Geological Survey and the Utah Department of Natural Resources, Division of Water Resources and Division of Water Rights, and the Utah Department of Environmental Quality, Division of Water Quality, provide data to enable interested parties to maintain awareness of changing ground-water conditions. This report, like the others in the series, contains information on well construction, ground-water withdrawal from wells, water-level changes, precipitation, streamflow, and chemical quality of water. Information on well construction included in this report refers only to wells constructed for new appropriations of ground water. Supplementary data are included in reports of this series only for those years or areas which are important to a discussion of changing ground-water conditions and for which applicable data are available. This report includes individual discussions of selected significant areas of ground-water development in the State for calendar year 2007. Most of the reported data were collected by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Division of Water Resources and Division of Water Rights, and the Utah Department of Environmental Quality, Division of Water Quality. This report is available online at http://www.waterrights.utah.gov/techinfo/ and http://ut.water.usgs.gov/publications/GW2008.pdf .

Utah↗
USGS2007

Ground-water conditions in Utah, spring of 2007

This is the forty-fourth in a series of annual reports that describe ground-water conditions in Utah. Reports in this series, published cooperatively by the U.S. Geological Survey and the Utah Department of Natural Resources, Division of Water Resources and Division of Water Rights, and the Utah Department of Environmental Quality, Division of Water Quality, provide data to enable interested parties to maintain awareness of changing ground-water conditions. This report, like the others in the series, contains information on well construction, ground-water withdrawal from wells, water-level changes, precipitation, streamflow, and chemical quality of water. Information on well construction included in this report refers only to wells constructed for new appropriations of ground water. Supplementary data are included in reports of this series only for those years or areas which are important to a discussion of changing ground-water conditions and for which applicable data are available. This report includes individual discussions of selected significant areas of ground-water development in the State for calendar year 2006. Most of the reported data were collected by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Division of Water Resources and Division of Water Rights, and the Utah Department of Environmental Quality, Division of Water Quality. This report is available online at http://www.waterrights.utah. gov/ and http://ut.water.usgs.gov/newUTAH/GW2007.pdf.

Utah↗
USGS2006

Ground-water conditions in Utah, spring of 2006

This is the forty-third in a series of annual reports that describe ground-water conditions in Utah. Reports in this series, published cooperatively by the U.S. Geological Survey and the Utah Department of Natural Resources, Division of Water Resources and Division of Water Rights, and the Utah Department of Environmental Quality, Division of Water Quality, provide data to enable inter­ested parties to maintain awareness of changing ground-water conditions. This report, like the others in the series, contains information on well construction, ground-water with­drawal from wells, water-level changes, precipitation, streamflow, and chemical quality of water. Information on well construction included in this report refers only to wells constructed for new appropriations of ground water. Supplementary data are included in reports of this series only for those years or areas which are important to a discussion of changing ground-water conditions and for which applicable data are available. This report includes individual discussions of selected significant areas of ground-water development in the State for calendar year 2005. Most of the reported data were collected by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Division of Water Resources and Division of Water Rights, and the Utah Department of Environmental Quality, Division of Water Quality. This report is available online at http://www.waterrights.utah. gov/techinfo/wwwpub/gw2006.pdf and http://ut.water.usgs. gov/publications/GW2006.pdf.

Utah↗
USGS1989

The chemical structure of highly aromatic humic acids in three volcanic ash soils as determined by dipolar dephasing NMR studies

Dipolar dephasing 13 C NMR studies of three highly aromatic humic acids, one from a modern soil and two from paleosols, have permitted the determination of the degree of aromatic substitution. From these data and the normal solid-state 13 C NMR data we have been able to develop a model for the average chemical structure of these humic acids that generally correlates well with permanganate oxidation data. The models depict these humic acids as benzene di- and tricarboxylic acids interconnected by biphenyl linkages. An increasing degree of substitution is observed with increasing geologic age. These structures may be characteristic of the resistant aromatic part of the “core” of humic substances that survives degradation.

Geochimica et Cosmochimica Acta↗
USGS2026

Estimating paleotemperature using stable isotopes of soil-formed phyllosilicates from paleosols: A review

Fossilized soils, or paleosols, contain soil-formed phyllosilicates whose stable isotopic compositions may be used to calculate paleotemperature and thus reconstruct ancient terrestrial environments. Though paleosols are common in the geologic record, the use of phyllosilicates as paleotemperature proxies is limited in the literature owing to difficulties with selecting optimal paleosols, isolation from non-clay minerals and organic materials, mixtures of phyllosilicates in natural samples, wide variations of chemical compositions for phyllosilicates, and limited to undefined equilibrium fractionation factors between phyllosilicates-water. Here, we address these challenges by examining and comparing methods used for sample selection, mineral isolation, pretreatments, mineral identification, conventional and developing methods for oxygen and hydrogen isotopic analyses, and determination of phyllosilicate-water equilibrium fractionation factors, concluding with recommendations for best approaches for paleotemperature estimation. Additionally, we discuss how to identify and avoid detrital phyllosilicates, the impacts of diagenesis, comparison of stable isotope and non-isotope paleosol paleotemperature proxies, and challenges and opportunities for broadly using paleosols as paleoclimate archives. With ongoing efforts to refine this multi-faceted paleotemperature approach, the stable isotope geochemistry of soil-formed phyllosilicates continues to be an invaluable proxy system, enhancing our understanding of terrestrial paleoenvironments and paleoclimate.

Kansas↗