SEARCH · USGS Science

Results for “The Depositional Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94Linked to original sources

USGS1986

Geophysical maps of the Dos Cabezas Mountains Wilderness Study Area, Cochise County, Arizona

The Dos Cabezas Mountains Wilderness Study Area, Arizona, lies along part of the crest and northeast flank of the Dos Cabezas Mountains, Cochise County, near the southeast corner of Arizona (fig. 1). The U.S. Bureau of Land Management requested mineral surveys of about 11,921 acres of the approximately 15,000 acre wilderness study area. In this report "wilderness study area" refers to the 11,921 acres that were studied. The Dos Cabezas Mountains are in many ways a typical mountain range of the Basin-and-Range physiographic province. They are a northwest-trending block-faulted range separated from adjacent ranges by broad valleys. The range is about 22 mi long and 8 mi wide, and it reaches an elevation of 8,354 ft at Dos Cabezas Peaks, located about 2 mi west of the study area. The terrain of the area is rugged. Roadheads and trails provide adequate access for foot traverses. In the Dos Cabezas Mountains the Apache Pass fault zone is the major structural feature, barely skirting the southwest side of the study area. It extends several miles to the northwest and tens of miles to the southeast, across the Chiricahua Mountains beyond Apache Pass. It is typically made up of a pair of bounding faults and some anastomosing faults between them. The study area is underlain by a variety of sedimentary, igneous, and metamorphic rocks that provide only a fragmentary record of geologic events between Precambrian and Holocene times. A suite of metamorphic and igneous (primarily crystalline) rocks forms the basement terrain. Paleozoic and Mesozoic sedimentary rocks and also Paleozoic and Mesozoic volcanic rocks overlie the basement rocks but are extensively eroded away and may be covered. A pile of volcanic rocks of Late Cretaceous and Paleocene age caps the older rocks in much of the study area. Mid-Tertiary intrusive rocks underlie the eastern part of the study area as well as some very small, widely scattered additional localities. Quaternary gravel deposits occur in the major valleys and along the mountain front.

Arizona↗

USGS2014

Hydrologic models and analysis of water availability in Cuyama Valley, California

Changes in population, agricultural development practices (including shifts to more water-intensive crops), and climate variability are placing increasingly larger demands on available water resources, particularly groundwater, in the Cuyama Valley, one of the most productive agricultural regions in Santa Barbara County. The goal of this study was to produce a model capable of being accurate at scales relevant to water management decisions that could be considered in the evaluation of the sustainable water supply. The Cuyama Valley Hydrologic Model (CUVHM) was designed to simulate the most important natural and human components of the hydrologic system, including components dependent on variations in climate, thereby providing a reliable assessment of groundwater conditions and processes that can inform water users and help to improve planning for future conditions. Model development included a revision of the conceptual model of the flow system, construction of a precipitation-runoff model using the Basin Characterization Model (BCM), and construction of an integrated hydrologic flow model with MODFLOW-One-Water Hydrologic Flow Model (MF-OWHM). The hydrologic models were calibrated to historical conditions of water and land use and, then, used to assess the use and movement of water throughout the Valley. These tools provide a means to understand the evolution of water use in the Valley, its availability, and the limits of sustainability. The conceptual model identified inflows and outflows that include the movement and use of water in both natural and anthropogenic systems. The groundwater flow system is characterized by a layered geologic sedimentary sequence that—in combination with the effects of groundwater pumping, natural recharge, and the application of irrigation water at the land surface—displays vertical hydraulic-head gradients. Overall, most of the agricultural demand for water in the Cuyama Valley in the initial part of the growing season is supplied by groundwater, which is augmented by precipitation during wet winter and spring seasons. In addition, the amount of groundwater used for irrigation varies from year to year in response to climate variation and can increase dramatically in dry years. Model simulation results, however, also indicated that irrigation may have been less efficient during wet years. Agricultural pumpage is a major component to simulated outflow that is often poorly recorded. Therefore, an integrated, coupled farm-process model is used to estimate historical pumpage for water-balance subregions that evolved with the development of groundwater in the Valley from 1949 through 2010. The integrated hydrologic model includes these water-balance subregions and delineates natural, municipal, and agricultural land use; streamflow networks; and groundwater flow systems. The redefinition of the geohydrologic framework (including the internal architecture of the sedimentary units) and incorporation of these units into the simulation of the regional groundwater flow system indicated that faults have compartmentalized the alluvial deposits into subregions, which have responded differently to regional groundwater flow, locations of recharge, and the effects of development. The Cuyama Valley comprises nine subregions grouped into three regional zones, the Main, Ventucopa Uplands, and Sierra Madre Foothills, which are fault bounded, represent different proportions of the three alluvial aquifers, and have different water quality. The CUVHM uses MF-OWHM to simulate and assess the use and movement of water, including the evolution of land use and related water-balance regions. The model is capable of being accurate at annual to interannual time frames and at subregional to valley-wide spatial scales, which allows for analysis of the groundwater hydrologic budget for the water years 1950–2010, as well as potential assessment of the sustainable use of groundwater. Simulated changes in storage over time showed that significant withdrawals from storage generally occurred not only during drought years (1976–77 and 1988–92) but also during the early stages of industrial agriculture, which was initially dominated by alfalfa production. Since the 1990s, agriculture has shifted to more water-intensive crops. Measured and simulated groundwater levels indicated substantial declines in selected subregions, mining of groundwater that is thousands to tens of thousands of years old, increased groundwater storage depletion, and land subsidence. Most of the recharge occurs in the upland regions of Ventucopa and Sierra Madre Foothills, and the largest fractions of pumpage and storage depletion occur in the Main subregion. The long-term imbalance between inflows and outflows resulted in simulated overdraft (groundwater withdrawals in excess of natural recharge) of the groundwater basin over the 61-year period of 1949–2010. Changes in storage varied considerably from year to year, depending on land use, pumpage, and climate conditions. Climatically driven factors can greatly affect inflows, outflows, and water use by more than a factor of two between wet and dry years. Although precipitation during inter-decadal wet years previously replenished the basin, the water use and storage depletion have lessened the effects of these major recharge events. Simulated and measured water-level altitudes indicated the presence of large areas where depressed water levels have resulted in large desaturated zones in the younger and Older Alluvium layers in the Main-zone subregions. The results of modeled projection of the base-case scenario 61 years into the future indicated that current supply-and-demand are unsustainable and will result in additional groundwater-level declines and related storage depletion and land subsidence. The reduced-supply and reduced-demand projections reduced groundwater storage depletion but may not allow for sustainable agriculture under current demands, agricultural practices, and land use.

California↗

USGS2004

The geochemical and magnetic record of coal combustion products in West Virginia reservoir sediments and soils

Western West Virginia lies downwind from numerous coal-fired power plants along the Ohio River Valley. To test whether geochemical and mineralogical impacts from these power plants are detectable on the West Virginia landscape, we obtained reservoir cores, soils, and rocks from two separate sites in West Virginia, one in Harrison County (Hinkel and Deegan Reservoirs) and the other in Roane County (Miletree Run Reservoir). Both have small drainage basins that have the effect of maximizing atmospheric inputs relative to weathering inputs. Sediments from Hinkel Reservoir were dated using the 137 Cs method, and by knowledge of the age of the base of the sedimentary section. Major elements in Hinkel Reservoir sediments do not vary systematically over time, suggesting that the depositional history of these sediments has been relatively constant. In contrast, minor elements and sulfur do show dramatic shifts. Zn, Pb, As, S, Cd, Ge, and Hg all peak during the late 1960s and early 1970s. Polyaromatic hydrocarbons associated with combustion processes likewise show this same behavior. Coincident with these maxima is a peak in isothermal remnant magnetization (IRM), a parameter that is proportional to magnetite abundance. We separated the magnetic fraction of the sediments and examined this fraction petrographically. It is dominated by magnetite with a spherical morphology, which is characteristic of magnetite produced by combustion processes. Chemical analyses on local rocks showed that they were not the likely source for the trace element and magnetite enrichments. To compare soils and reservoir sediments, we normalized geochemical data to Ti; the underlying assumption is that Ti will track physical inputs of soil materials into the reservoir sediments. The normalized sediment data for the elements Zn, Pb, As, and S are all higher for sediments deposited during the late 1960s and early 1970s compared to normalized soil data, implying that soils are not the source for the element enrichments. We thus attribute the enrichment to atmospheric inputs. However, a coal-burning zinc smelter within 10 km of the reservoir site that operated until 1971 may have supplied some or all of the anomalous input: There are no nearby major atmospheric pollution sites near Miletree Run Reservoir. A core from this reservoir was dated based on knowledge of the time it was impounded. Like Hinkel Reservoir, there are no systematic shifts in major element contents over its depositional history. Like Hinkel Reservoir, there are also significant shifts in trace elements and IRM that cannot be explained by local soil sources. Magnetic separates from this reservoir are also dominated by spherical combustion-produced magnetite. Covariance over the period 1930-1980 between magnetite and sulfur with US SO 2 production (which comes dominantly from coal combustion) is strongly suggestive of a significant atmospheric input into Miletree Run Reservoir sediments. The nearest upwind power plants are between 50 and 75 km distant. Thus, relatively long distance transmission of particulate matter from the power plants of the Ohio River Valley is likely in this case.

West Virginia↗

USGS1971

Surf-beat origin for pulsating bottom currents in the Rio Balsas submarine canyon, Mexico

A previously unreported process was observed at the head of a tributary to the Rio Balsas submarine canyon system in Mexico. During a period of large surf, river discharge deflected a pulsating longshore current [peaking at over 7 km/hr (2 m/sec)] seaward over the tributary heading in the surf zone. This pulsating flow occasionally entered the river mouth, causing rhythmic fluctuations with amplitudes of at least 30 cm and a period of about 3 minutes within the mouth, as recorded by a partially filtered tide gage. In diving to the bottom of the tributary at a depth of 18 m, we encountered current pulses with estimated velocities of 4 km/hr (more than 1 m/sec) transporting large amounts of suspended sand down an axial slope of 26°. This bottom flow was at least 3 m thick, and was characterized by pulses separated by quiet periods in phase with the surface rip current. The upper 20 cm of the canyon fill during this time consisted of sand smoothly laminated parallel to the bottom, indicating net deposition on the steeply sloping floor. Estimated water budget suggested that the entire water column below the rip current at 18 m was not flowing seaward during the pulses. The bottom flow landward of the dive site probably separated from the surface flow and was propagated downslope as a turbidity current. Its magnitude was sufficient to erode the canyon walls. These observations substantiate that rip currents play a role in the formation of some submarine canyons. Surf-beat induced rhythmic flushing of the river mouth, however, did not cause density currents in the main canyon head. The need for future canyon studies under extreme conditions is pointed out.

Cañón de la Necesidad, Rio Balsas submarine canyon↗

USGS1985

Evaluating earthquake hazards in the Los Angeles region— An earth-science perspective

Potentially destructive earthquakes are inevitable in the Los Angeles region of California, but hazards prediction can provide a basis for reducing damage and loss. This volume identifies the principal geologically controlled earthquake hazards of the region (surface faulting, strong shaking, ground failure, and tsunamis), summarizes methods for characterizing their extent and severity, and suggests opportunities for their reduction. Two systems of active faults generate earthquakes in the Los Angeles region: northwest-trending, chiefly horizontal-slip faults, such as the San Andreas, and west-trending, chiefly vertical-slip faults, such as those of the Transverse Ranges. Faults in these two systems have produced more than 40 damaging earthquakes since 1800. Ninety-five faults have slipped in late Quaternary time (approximately the past 750,000 yr) and are judged capable of generating future moderate to large earthquakes and displacing the ground surface. Average rates of late Quaternary slip or separation along these faults provide an index of their relative activity. The San Andreas and San Jacinto faults have slip rates measured in tens of millimeters per year, but most other faults have rates of about 1 mm/yr or less. Intermediate rates of as much as 6 mm/yr characterize a belt of Transverse Ranges faults that extends from near Santa Barbara to near San Bernardino. The dimensions of late Quaternary faults provide a basis for estimating the maximum sizes of likely future earthquakes in the Los Angeles region: moment magnitude .(M) 8 for the San Andreas, M 7 for the other northwest-trending elements of that fault system, and M 7.5 for the Transverse Ranges faults. Geologic and seismologic evidence along these faults, however, suggests that, for planning and designing noncritical facilities, appropriate sizes would be M 8 for the San Andreas, M 7 for the San Jacinto, M 6.5 for other northwest-trending faults, and M 6.5 to 7 for the Transverse Ranges faults. The geologic and seismologic record indicates that parts of the San Andreas and San Jacinto faults have generated major earthquakes having recurrence intervals of several tens to a few hundred years. In contrast, the geologic evidence at points along other active faults suggests recurrence intervals measured in many hundreds to several thousands of years. The distribution and character of late Quaternary surface faulting permit estimation of the likely location, style, and amount of future surface displacements. An extensive body of geologic and geotechnical information is used to evaluate areal differences in future levels of shaking. Bedrock and alluvial deposits are differentiated according to the physical properties that control shaking response; maps of these properties are prepared by analyzing existing geologic and soils maps, the geomorphology of surficial units, and. geotechnical data obtained from boreholes. The shear-wave velocities of near-surface geologic units must be estimated for some methods of evaluating shaking potential. Regional-scale maps of highly generalized shearwave velocity groups, based on the age and texture of exposed geologic units and on a simple two-dimensional model of Quaternary sediment distribution, provide a first approximation of the areal variability in shaking response. More accurate depictions of near-surface shear-wave velocity useful for predicting ground-motion parameters take into account the thickness of the Quaternary deposits, vertical variations in sediment .type, and the correlation of shear-wave velocity with standard penetration resistance of different sediments. A map of the upper Santa Ana River basin showing shear-wave velocities to depths equal to one-quarter wavelength of a 1-s shear wave demonstrates the three-dimensional mapping procedure. Four methods for predicting the distribution and strength of shaking from future earthquakes are presented. These techniques use different measures of strong-motion

California↗

USGS1998

Streamflow losses in the Black Hills of western South Dakota

Losses occur in numerous streams that cross outcrops of various sedimentary rocks that are exposed around the periphery of the Black Hills of South Dakota. These streamflow losses are recognized as an important source of local recharge to regional bedrock aquifers. Most streams lose all of their flow up to some threshold rate. Streamflow is maintained through a loss zone when the threshold is exceeded. Streamflow records for 86 measurement sites are used to determine bedrock loss thresholds for 24 area streams, which have individual loss thresholds that range from negligible (no loss) to as much as 50 cubic feet per second. In addition, insights are provided regarding springflow that occurs in the immediate vicinity of selected loss zones. Most losses occur to outcrops of the Madison Limestone and Minnelusa Formation. Losses to the Deadwood Formation probably are minimal. Losses to the Minnekahta Limestone generally are small; however, they are difficult to quantify because of potential losses to extensive alluvial deposits that commonly are located near Minnekahta outcrops. Loss thresholds for each stream are shown to be relatively constant, without measurable effects from streamflow rates or duration of flow through the loss zones. Calculated losses for measurements made during high-flow conditions generally have larger variability than calculated losses for low-flow conditions; however, consistent relations between losses and streamflow have not been identified. Some of this variability results from the inability to account for tributary inflows and changes in storage. Calculated losses are shown to decrease, in some cases, during periods of extended flow through loss zones. Decreased 'net' losses, however, generally can be attributed to springflow (ground-water discharge) within a loss zone, which may occur during prolonged periods of wet climatic conditions. Losses to unsaturated alluvial deposits located adjacent to the stream channels are found to have significant effects on determination of bedrock losses. Large losses occur in filling initial storage in unsaturated alluvial deposits downstream from loss zones, when bedrock loss thresholds are first exceeded. Losses to alluvial deposits in the range of tens of cubic feet per second and alluvial storage capacities in the range of hundreds of acre-feet are documented. Significant changes in loss thresholds for Grace Coolidge Creek, Spring Creek, and Whitewood Creek are documented. Introduction of large quantities of fine-grained sediments into these stream channels may have affected loss thresholds for various periods of time.

South Dakota↗

USGS1991

Cenozoic prograding sequences of the Antarctic continental margin: a record of glacio-eustatic and tectonic events

Sedimentary sections up to 6-14 km thick lie beneath many areas of the Antarctic continental margin. The upper parts of the sections contain up to 6 km of Cenozoic glacial and possibly non-glacial sequences that have prograded the continental shelf up to 85 km. We describe the Cenozoic sequences using two general categories based on their acoustic geometries. Type IA sequences, which account for most prograding of the Antarctic continental shelf, have complex sigmoidal geometries and some acoustic characteristics atypical of low-latitude margins, such as troughs and mounds lying parallel and normal to the shelf edge and high velocities (2.0-2.6 km/s) for flat layers within 150 m of the seafloor. Type IIA sequences, which principally aggrade the paleoshelf, lie beneath type IA sequences and have mostly simple geometries and gently dipping reflections. The prograding sequences are commonly located near the seaward edges of major Mesozoic and older margin structures. Relatively rapid Cenozoic subsidence has occurred due to the probable rifting in the Ross Sea, thermal subsidence in the Antarctic Peninsula, and isostatic crustal flexure in Wilkes Land. In Prydz Bay and the Weddell Sea, prograding sequences cover Mesozoic basins that have undergone little apparent Cenozoic tectonism. Grounded ice sheets are viewed by us, and others, as the principal mechanism for depositing the Antarctic prograding sequences. During the initial advance of grounded ice the continental shelf is flexurally overdeepened, the inner shelf is heavily eroded, and gently dipping glacial strata are deposited on the shelf (i.e type IIA sequences). The overdeepened shelf profile is preserved (a) during glacial times, by grounded ice sheets episodically crossing the shelf, eroding sediments from onshore and inner shelf areas, and depositing sediments at the front of the ice sheet as outer shelf topset-banks and continental slope foreset-aprons (i.e. type IA sequences), and (b) during interglacial times, like today, by little or no clastic sedimentation on the continental shelf other than beneath retreated ice shelves lying far from the continental sheld edge. Ice streams carve broad depressions across the shelf and carry abundant basal sediments directly to the continental shelf edge, thereby creating troughmouth fans and sheet-like prograding sequences (i.e. type IA sequences). Numerous acoustic unconformities and multiple overcompacted layers within the prograding sequences suggest major fluctuations of the Antarctic Ice Sheet. The available drilling and seismic interpretations provide the following history: (1) Cenozoic ice sheets have existed in places near the continental shelf since middle to late Eocene time. (2) A grounded Antarctic ice sheet first expanded to the continental shelf edge, with probable overdeepening of the outer shelf, in late Eucene to early Oligocene time in Prydz Bay, possibly in early Miocene time in the Ross Sea, and at least by middle Miocene time in the Weddell Sea. (3) The relative amounts of shelf prograding and inferred ice-volume variations (and related sea-level changes) have increased since middle to late Miocene time in the eastern Ross Sea, Prydz Bay, and possibly Weddell Sea. Our analysis is preliminary. Further acoustic surveys and scientific drilling are needed to resolve the proximal Antarctic record of glacio-eustatic, climatic, and tectonic events recorded by the prograding sequences.

Marine Geology↗

USGS2012

Geology of the Mount St. Helens area: Record of discontinuous volcanic and plutonic activity in the Cascade Arc of southern Washington

The Quaternary edifice of Mount St. Helens volcano was built upon a deeply eroded terrane of gently folded and altered volcanic and plutonic rocks that represent the core of the Tertiary Cascade magmatic arc. These rocks constitute an east dipping homoclinal sequence, several kilometers thick, of subaerially erupted mafic to silicic flows and volcaniclastic strata; K‐Ar ages from this section range from about 28 to 23 Ma (late Oligocene and earliest Miocene), which corresponds to an apparent lull in Cascade volcanism to the north of Mount Rainier. Volcanism was essentially continuous during this period of time, and neither a well‐defined base nor top of the section is exposed within the mapped area. Basalt and basaltic andesite dominate the lower part of the mid‐Tertiary section, whereas andesitic and dacitic rocks comprise most of the upper part. This section was intruded by numerous mafic to silicic dikes, sills, and irregular plutonic bodies, most no more than a few million years younger than their host rocks, and subjected to pervasive burial metamorphism and widespread hydrothermal alteration. Large areas of hornfelsed rock surrounding even relatively small intrusions indicate that the proportion of plutonic rock becomes significantly greater at shallow depth beneath the existing erosion surface. A large granitic pluton intruded the mid‐Tertiary section north of Spirit Lake at about 21 Ma. The Earl porphyry copper deposit occurs within the pluton but appears too young (17 Ma) to be genetically related to it. In contrast to the rather continuous and voluminous Oligocene to early Miocene activity, volcanism since then in the Mount St. Helens area has been localized and Volumetrically minor. Products of three younger eruptive periods have been recognized: a sequence of 15 m.y. old pyroxene andesite flows resting unconformably on mid‐Tertiary strata south of Mount St. Helens, widespread shallow dikes and sills of pyroxene andesite between 10 and 8 m.y. old, and compositionally diverse rocks erupted during the past 3 m.y. The Quaternary lavas are more potassic than the Tertiary lavas and typically contain phenocrysts of hornblende and biotite, which are absent from the older rocks. A number of Tertiary structures define a broad NNE trending zone that may reflect a deep‐seated lithospheric flaw that has controlled the locus of Cascade magmatism in southern Washington for the past 25 m.y. Mount St. Helens lies within this zone at the intersection of the NNW striking St. Helens seismic zone (SHZ) and an ENE trending alignment of Pleistocene silicic plug‐domes. No surface breakage has been detected along the SHZ, which is apparently very young. The linear zone of silicic vents is probably controlled by a fault that has been interpreted from seismic records to occur directly beneath the volcano. This zone parallels the directions of regional maximum horizontal compressive stress and North America/Juan de Fuca plate convergence. Mount St. Helens is an example of a low‐volume tectonically controlled magmatic system in an early stage of development.

Washington↗

USGS2025

Foundational uncertainties in terminal Ediacaran chronostratigraphy revealed by high-precision zircon U-Pb geochronology of the Nama Group, Namibia

The Nama Group of southern Namibia and northwestern South Africa hosts the best-dated mixed carbonate-siliciclastic foreland basin succession of the terminal Ediacaran [ca. 551 million years (Ma) ago to <538 Ma] and is key for resolving the chronology of early metazoan evolution. Numerous silicified volcanic tuff interbeds are present, but differing interpretations regarding the fidelity of their ages lead to different regional stratigraphic correlations, especially for the Urusis Formation of the Schwarzrand Subgroup. An expanded record of the Urusis Formation is found in the Swartpunt area of southern Namibia, which has yielded an important metazoan biota. But the succession in this area is preserved as a series of thrusts at the leading edge of the Gariep orogenic belt and zircon U-Pb data show systematic age repetition. We use regional stratigraphic and structural mapping, integrated with carbonate carbon isotope (δ 13 C carb ) chemostratigraphy and high-precision radioisotope U-Pb zircon geochronology from outcrop and recently acquired drill core to develop a temporally calibrated basin-wide depositional model. This integrated dataset either reflects complex zircon reworking, inheritance, or potential analytical biases (Scenario 1) or the presence of a Gariep-related cryptic décollement within the Spitskop Member that has resulted in stratigraphic repetition (Scenario 2). We investigate the evidence for and against both scenarios and consider their implications for stratigraphic and δ 13 C carb correlations between the Swartpunt area and coeval exposures along the Orange River border with South Africa. Given that these issues are in an area that hosts numerous silicified ash beds and extensive exposure, an inability to confidently discount either scenario highlights a level of compounding uncertainty in zircon U-Pb geochronology that must be considered when attempting to build global chronostratigraphic frameworks. Scenario 1 implies that some of the weighted mean ages and Bayesian eruption ages from the Swartpunt area may be >1 Myr older than the depositional age of their respective ash beds when assuming existing stratigraphic correlations. If this scenario is preferred, then a cautious approach would be to consider all weighted mean zircon U-Pb ages from ash beds to reflect maximum depositional ages. Both scenarios support deposition of the Huns Member >540 Ma in the Swartpunt area if the oldest weighted mean age reported here represents a near-depositional age, which has significant implications for the temporal calibration of important terminal Ediacaran ichnofossil assemblages and future cyclostratigraphic studies. Stratigraphic correlations common to both scenarios allow us to temporally calibrate a basin evolution model for the Nama Group. Temporal trends in initial hafnium isotope (εHf) compositions of zircon grains from ash beds throughout the succession may support progressive crustal thickening associated with underplating of the Damara orogenic belt along the northern periphery of the Kalahari craton from ca. 547 Ma to ca. 538 Ma. The compilation of new and published zircon U-Pb ages may also imply that the locus of carbonate platform development migrated from north to south (present co-ordinates), tracking the migration of foredeep subsidence.

Earth-Science Reviews↗

USGS2001

Geologic map of Colorado National Monument and adjacent areas, Mesa County, Colorado

New 1:24,000-scale geologic mapping in the Colorado National Monument Quadrangle and adjacent areas, in support of the USGS Western Colorado I-70 Corridor Cooperative Geologic Mapping Project, provides new interpretations of and data for the stratigraphy, structure, geologic hazards in the area from the Colorado River in Grand Valley onto the Uncompahgre Plateau. The plateau drops abruptly along northwest-trending structures toward the northeast 800 m to the Redlands area and the Colorado River in Grand Valley. In addition to common alluvial and colluvial deposits, surficial deposits include Holocene and late Pleistocene charcoal-bearing valley-fill deposits, late to middle Pleistocene river-gravel terrace deposits, Holocene to middle Pleistocene younger, intermediate, and old fan-alluvium deposits, late to middle Pleistocene local gravel deposits, Holocene to late Pleistocene rock-fall deposits, Holocene to middle Pleistocene young and old landslide deposits, Holocene to late Pleistocene sheetwash deposits and eolian deposits, and Holocene Cienga-type deposits. Only the lowest part of the Upper Cretaceous Mancos Shale is exposed in the map area near the Colorado River. The Upper and Lower? Cretaceous Dakota Formation and the Lower Cretaceous Burro Canyon Formation form resistant dipslopes in the Grand Valley and a prominent ridge on the plateau. Less resistant strata of the Upper Jurassic Morrison Formation consisting of the Brushy Basin, Salt Wash, and Tidwell Members form slopes on the plateau and low areas below the mountain front of the plateau. The Middle Jurassic Wanakah Formation nomenclature replaces the previously used Summerville Formation. Because an upper part of the Middle Jurassic Entrada Formation is not obviously correlated with strata found elsewhere, it is therefore not formally named; however, the lower rounded cliff former Slickrock Member is clearly present. The Lower Jurassic silica-cemented Kayenta Formation forms the cap rock for the Lower Jurassic carbonate-cemented Wingate Sandstone, which forms the impressive cliffs of the monument. The Upper Triassic Chinle Formation was deposited on the eroded and weathered Middle Proterozoic meta-igneous gneiss, pegmatite dikes, and migmatitic gneiss. Structurally the area is deceptively challenging. Nearly flat-lying strata on the plateau are folded by northwest-trending fault-propagation folds into at least two S-shaped folds along the mountain front of the plateau. Strata under Grand Valley dip at about 6 degrees to the northeast. In the absence of local evidence, the uplifted plateau is attributed to Laramide deformation by dated analogous structures elsewhere in the Colorado Plateau. The major exposed fault records high-angle reverse relationships in the basement rocks but dissipates strain as a triangular zone of distributed microfractures and cataclastic flow into overlying Mesozoic strata that absorb the fault strain, leaving only folds. Evidence for younger, probably late Pliocene or early Pleistocene, uplift does exist at the antecedent Unaweep Canyon south and east of the map area. To what degree this younger deformation affected the map area is unknown. Several geologic hazards affect the area. Middle and late Pleistocene landslides involving the smectite-bearing Brushy Basin Member of the Morrison Formation are extensive on the plateau and common in the Redlands below the plateau. Expansive clay in the Brushy Basin and other strata create foundation stability problems for roads and homes. Flash floods create a serious hazard to people on foot in narrow canyons in the monument and to homes close to water courses downstream from narrow restrictions close to the monument boundary.

Colorado↗

USGS1998

Water resources of Lac Vieux Desert indian community and vicinity, western Upper Peninsula, Michigan

Lac Vieux Desert, a 6.6 square-mile lake on the Michigan-Wisconsin border, is the headwaters of the Wisconsin River. The Lac Vieux Desert Band of Lake Superior Chippewa Indians have a number of homes and tribal property on the Lake's north shore. Most drinking water is obtained from wells drilled in unconsolidated glacial deposits. A gravel layer at or near the bedrock surface is the most productive aquifer on tribal property. Water quality of Lac Vieux Desert is a concern for tribal members. To assess general water-quality conditions, water samples were collected at three sites on the lake in March 1996 and at 10 sites in October 1996. Profiles of pH, dissolved oxygen, specific conductance, and temperature indicate that the lake is well mixed in the fall but not when the lake is ice covered in winter. Between 1913 and 1995, the minimum and maximum daily recorded lake levels were 1,679.28 feet (in 1925) and 1,682.16 feet (in 1951) above sea level. Since the early 1950's, the annual minimum lake-level has been lower and less variable than before the 1950's. Although the level of Lac Vieux Desert is regulated, historical levels show year-to-year fluctuations that reflect transient changes in precipitation amounts.

Michigan↗

USGS2013

Roman, Visigothic and Islamic evidence of earthquakes recorded in the archaeological site of “El Tolmo de Minateda” (Prebetic Zone, southeast of Spain)

The archaeological site of “El Tolmo de Minateda” is located within the Albacete province (SE of Spain) and shows a continuous time record of ancient civilizations from 3500 yr BP onwards. However, three temporal gaps were identified in this archaeological record, all of them in relationship with a sudden and unclear abandonment of the city (Centuries 1st, 7th and 9-10th). The Archaeological Earthquake Effects (EAEs) supports the possibility that moderate to strong earthquakes were the cause of such abandonments: oriented columns fallen, collapsed walls and arches, abandonment of irrigation systems and fresh-water supplies, crashed pottery, etc. Despite of the scarce of instrumental seismicity and a few historical chronicles, paleoseismic studies performed in the neighbouring zone (Tobarra) suggest the presence of closer seismic sources as faults (Pozohondo Fault) affecting Quaternary alluvial, lacustrine deposits and colluviums. In this work, we propose the possibility that three moderate earthquakes devastated the ancient Roman city of Ilunum (Century 1st AD), the Visigothic city of Elo (Century 7th AD) and the Islamic city of Madinat Iyih (Century 9th-10thAD), all of them the same place: “El Tolmo de Minateda”.

Cuaternario y Geomorfologia↗

USGS2024

To mix or not to mix: Details of magma storage, recharge, and remobilization during the Pacheco stage at Misti Volcano, Peru (≤21–2 ka)

We investigate ten of the most recent tephra-fall deposits emplaced between ≤21–2 ka from the Pacheco stage of Misti volcano, Peru, to elucidate magma dynamics and explosive eruption triggers related to magma storage, recharge, and remobilization. Whole-rock, glass, and mineral textures and compositions indicate the presence of broadly felsic, intermediate, and mafic magmas in a chemically and thermally stratified magma storage system (Zones 1–3) that interact to differing extents prior to eruption. Intermediate magmas are defined by plagioclase + amphibole + two-pyroxenes + Fe-Ti oxides and phase equilibria indicate they formed at ~300–600 MPa and ~950–1000 °C. Intermediate magmas dominate the Pacheco stage and either erupted alone as hybridized magmas or mingled with minor volumes of cool felsic magmas (~800 °C) in which only plagioclase + Fe-Ti oxides are stable. Felsic magmas do not exclusively comprise any tephra-fall deposit emplaced during the Pacheco stage but were remobilized by recharge and mixing with intermediate magmas in order to erupt. Furthermore, felsic-hosted amphibole cognate to the intermediate magmas are reacted despite the felsic magmas being water saturated, which suggests they are staged above the amphibole stability limit (≤200 MPa). The cryptic presence of mafic magmas is indicated by high-An plagioclase cores (An 74–88 ), rare anhedral olivine (Fo 77–80 ), and possibly high Mg# augite and amphibole (up to Mg# 84 and 77, respectively). The dearth of basalt to basaltic andesite melts recorded in erupted glasses and exclusivity of high-An plagioclase to crystal cores signals mafic magmas are staged deeper in the crust than the intermediate magmas. Periodic interactions between these magmas tracked via glass compositions and crystal exchange reveal an alternation between the production of mingled magmas and their eruption shortly after a recharge event, followed by a period of homogenization and eruption of hybridized magmas. As such, we identify magma recharge as a key mechanism by which half of the explosive eruptions were triggered in the Pacheco stage. A >100 °C increase in Misti’s fumarole temperatures from 1967 to 2018 coincident with changes in fumarolic gas composition is consistent with degassing of a mafic recharge magma, signaling that Misti could produce similar explosive eruptions in the future.

Misti Volcano↗

USGS2016

Reevaluating the age of the Walden Creek Group and the kinematic evolution of the western Blue Ridge, southern Appalachians

An integrated synthesis of existing datasets (detailed geologic mapping, geochronologic, paleontologic, geophysical) with new paleontologic and geochemical investigations of rocks previously interpreted as part of the Neoproterozoic Walden Creek Group in southeastern Tennessee suggest a necessary reevaluation of the kinematics and structural architecture of the Blue Ridge Foothills. The western Blue Ridge of Tennessee, North Carolina, and Georgia is composed of numerous northwest-directed early and late Paleozoic thrust sheets, which record pronounced variation in stratigraphic/structural architecture and timing of metamorphism. The detailed spatial, temporal, and kinematic relationships of these rocks have remained controversial. Two fault blocks that are structurally isolated between the Great Smoky and Miller Cove-Greenbrier thrust sheets, here designated the Maggies Mill and Citico thrust sheets, contain Late Ordovician-Devonian conodonts and stable isotope chemostratigraphic signatures consistent with a mid-Paleozoic age. Geochemical and paleontological analyses of Walden Creek Group rocks northwest and southeast of these two thrust sheets, however, are more consistent with a Late Neoproterozoic (550–545 Ma) depositional age. Consequently, the structural juxtaposition of mid-Paleozoic rocks within a demonstrably Neoproterozoic-Cambrian succession between the Great Smoky and Miller Cove-Greenbrier thrust sheets suggests that a simple foreland-propagating thrust sequence model is not applicable in the Blue Ridge Foothills. We propose that these younger rocks were deposited landward of the Ocoee Supergroup, and were subsequently plucked from the Great Smoky fault footwall as a horse, and breached through the Great Smoky thrust sheet during Alleghanian emplacement of that structure.

North Carolina, Tennessee↗

USGS1903

The mineral resources of the Mount Wrangell district, Alaska

The Tenth Census, taken in 1880, gives the number of white inhabitants of the Territory of Alaska as 430. In the decade from 1880 to 1890 this number had increased to 4,298, and in the following decade, that between 1890 and 1900, a further increase to 30,493 is recorded. The Director of the Mint in his report for 1891 gives the value of the yield of the Territory in precious metals as $772,197. By 1900 these figures were increased to $8,265,772. These statistics of the growth in population and in mineral output of Alaska serve as an index to the general increase in the importance and· commercial value of the Territory as an integral part of the domain of the United States. The larger part of this growth began with the discovery, late in the autumn of 1896, of the placer deposits of Klondike River in Canadian Yukon territory. Soon after this discovery there was a great influx of prospectors, miners, and, business men to all parts of Alaska, but particularly to the regions tributary to the Yukon, and with this increase in population came a proportional increase in transportation facilities and business interests.

Alaska↗

USGS1970

Sediment transport by streams in the Palouse River basin, Washington and Idaho, July 1961-June 1965

The Palouse River basin covers about 3,300 square miles in southeastern Washington and northwestern Idaho. The eastern part of the basin is composed of steptoes and foothills which are generally above an altitude of 2,600 feet; the central part is of moderate local relief and is mantled chiefly by thick loess deposits; and the western part is characterized by low relief and scabland topography and is underlain mostly by basalt. Precipitation increases eastward across the study area. It ranges annually from 12 to 18 inches in the western part and from 14 to 23 inches in the central part, and it exceeds 40 inches in the eastern part. Surface runoff from the basin for the 4-year period of study (July 1961-June 1965) averaged 408,000 acre-feet per year, compared with 445,200 acre-feet per year for the 27-year period of record. The eastern part of the basin contributed about 55 percent of the total, whereas the central and western parts contributed 37 percent and 8 percent, respectively. Most sediment transport from the Palouse River basin and the highest sediment concentrations in streams occurred in the winter. Of the several storms during the study period, those of February 3-9, 1963, December 22-27, 1964, and January 27-February 4, 1965, accounted for 81 percent of the total 4-year suspended-sediment load; the storm of February 3-9, 1963, accounted for nearly one-half the total load. The discharge-weighted mean concentration of suspended sediment carried in the Palouse River past Hooper during the study period was 2,970 milligrams per liter. The average annual sediment discharge of the Palouse River at its mouth was about 1,580,000 tons per year, and the estimated average annual sediment yield was 480 tons per square mile. The yield ranged from 5 tons per square mile from the western part of the basin to 2,100 tons per square mile from the central part. The high yield from the central part is attributed to a scarcity of vegetal cover, to the fine-grained loess soils, and to rapid runoff during winter storms. Sediment yield from the eastern part of the basin ranged from 460 to more than 1,000 tons per square mile. During high flow, silt particles make up the largest part of the suspended-sediment load, whereas during low flow, clay particles represent the greatest part. On the average, the suspended sediment transported by the Palouse River past Hooper contained 3 percent sand, 68 percent silt, and 29 percent clay. Unmeasured sediment discharge was estimated to have been 5 percent of the total sediment discharge. Data collected during the 4-year period of study show that sediment loads were higher than those recorded by V. G. Kaiser during the longer period 1939-65. Whereas Kaiser's study showed an average annual soil loss of 9.6 million tons, the average annual loss during the recent study was 14.2 million tons. The factor that has had the greatest effect on the increase of sediment yields is land use. Lands once covered and protected by natural vegetation have been extensively, cultivated, and much of the soil has become susceptible to erosion, particularly in areas mantled by loessal soils.

Idaho, Washington↗

USGS2020

Photoluminescence imaging of whole zircon grains on a petrographic microscope—An underused aide for geochronologic studies

The refractory nature of zircon to temperature and pressure allows even a single zircon grain to preserve a rich history of magmatic, metamorphic, and hydrothermal processes. Isotopic dating of micro-domains exposed in cross-sections of zircon grains allows us to interrogate this history. Unfortunately, our ability to select the zircon grains in a heavy mineral concentrate that records the most geochronologic information is limited by our inability to predict internal zonation from observations of whole grains. Here we document the use of a petrographic microscope to observe and image the photoluminescence (PL) response of whole zircon grains excited under ultraviolet (UV) light, and the utility of this PL response in selecting grains for geochronology. While zircon fluorescence has long been known, there is limited documentation of its utility for and application to geochronologic studies. Our observations of zircon from an un-metamorphosed igneous rock, two meta-igneous rocks, and a placer deposit show that variations in the PL color are readily observable in real-time, both among grains in a population of zircons and within single grains. Analyses of cross-sections of the same grains demonstrate that the changes in PL correlate with zoning in backscattered electron (BSE) and cathodoluminescence (CL) images as well as with changes in U + Th concentration and spectroscopic proxies for radiation damage. In other words, the whole grain PL provides a low-resolution preview of the U + Th zoning expected in a cross-sectioned grain. We demonstrate the usefulness of this “preview” in identifying and selecting the subset of zircon grains in a heavy mineral separate that has metamorphic rims of sufficient width to date by secondary ionization mass spectrometry (SIMS). The data are also used to place preliminary constraints on the age and U + Th concentrations at which a yellow PL response is observed in natural samples. The PL response of zircon is well-known among spectroscopists, and these simple applications demonstrate several ways in which the response might be more effectively used by geochronologists.

Minerals↗

USGS2017

The 3.6 ka Aniakchak tephra in the Arctic Ocean: A constraint on the Holocene radiocarbon reservoir age in the Chukchi Sea

The caldera-forming eruption of the Aniakchak volcano in the Aleutian Range on the Alaskan Peninsula at 3.6 cal kyr BP was one of the largest Holocene eruptions worldwide. The resulting ash is found as a visible sediment layer in several Alaskan sites and as a cryptotephra on Newfoundland and Greenland. This large geographic distribution, combined with the fact that the eruption is relatively well constrained in time using radiocarbon dating of lake sediments and annual layer counts in ice cores, makes it an excellent stratigraphic marker for dating and correlating mid–late Holocene sediment and paleoclimate records. This study presents the outcome of a targeted search for the Aniakchak tephra in a marine sediment core from the Arctic Ocean, namely Core SWERUS-L2-2-PC1 (2PC), raised from 57 m water depth in Herald Canyon, western Chukchi Sea. High concentrations of tephra shards, with a geochemical signature matching that of Aniakchak ash, were observed across a more than 1.5 m long sediment sequence. Since the primary input of volcanic ash is through atmospheric transport, and assuming that bioturbation can account for mixing up to ca. 10 cm of the marine sediment deposited at the coring site, the broad signal is interpreted as sustained reworking at the sediment source input. The isochron is therefore placed at the base of the sudden increase in tephra concentrations rather than at the maximum concentration. This interpretation of major reworking is strengthened by analysis of grain size distribution which points to ice rafting as an important secondary transport mechanism of volcanic ash. Combined with radiocarbon dates on mollusks in the same sediment core, the volcanic marker is used to calculate a marine radiocarbon reservoir age offset Δ R = 477 ± 60 years. This relatively high value may be explained by the major influence of typically "carbon-old" Pacific waters, and it agrees well with recent estimates of Δ R along the northwest Alaskan coast, possibly indicating stable oceanographic conditions during the second half of the Holocene. Our use of a volcanic absolute age marker to obtain the marine reservoir age offset is the first of its kind in the Arctic Ocean and provides an important framework for improving chronologies and correlating marine sediment archives in this region. Core 2PC has a high sediment accumulation rate averaging 200 cm kyr throughout the last 4000 years, and the chronology presented here provides a solid base for high-resolution reconstructions of late Holocene climate and ocean variability in the Chukchi Sea.

Alaska↗