USGS Science⌕ Search

SEARCH · USGS Science

Results for “Map Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94Linked to original sources
USGS2009

EAARL Coastal Topography-Assateague Island National Seashore, 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Assateague Island National Seashore in Maryland and Virginia, acquired March 24-25, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for pre-survey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2009

EAARL Coastal Topography-Assateague Island National Seashore, 2008: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Assateague Island National Seashore in Maryland and Virginia, acquired March 24-25, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for pre-survey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2011

EAARL Coastal Topography--Cape Canaveral, Florida, 2009: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Kennedy Space Center, FL. This project provides highly detailed and accurate datasets of a portion of the eastern Florida coastline beachface, acquired on May 28, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2007

Outcrop descriptions and fossils from the Upper Cretaceous Frontier Formation, Wind River Basin and adjacent areas, Wyoming: Chapter 11 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

The Wind River Basin of central Wyoming trends west-northwest from near the community of Alcova to near the town of Dubois (fig. 1). On the perimeter of the basin, outcrops of the Frontier Formation were examined and described during the years 1972-1975. Invertebrate fossils were collected from those outcrops during the years 1972-1996, in places with the assistance of other earth scientists (see Acknowledgments). The Frontier Formation in the Wind River Basin, ranging in thickness from 650 to 1,000 ft thick, consists mainly of sandstone, siltstone, shale, and bentonite of early Late Cretaceous age. The Frontier conformably overlies the Mowry Shale and is conformably overlain by the Cody Shale. A basal unit of the Cody, a sequence of marine noncalcareous shale, is named the Sage Breaks Member. The Frontier consists of two or three members, separated by disconformities; in ascending order, the Belle Fourche, Emigrant Gap, and Wall Creek. At several localities, the Emigrant Gap Member is missing. The formation was deposited mainly in marine environments, although nonmarine beds are conspicuous in the western part of the basin. Strata of the Frontier record a succession of marine regressions and transgressions. Molluscan fossils from the marine beds were identified and related to the chronostratigraphic chart shown in figure 2. The absolute ages on the chart were determined and supplied by J.D. Obradovich (Cobban and others, 2006). In this region, the Belle Fourche is of Cenomanian age, the Emigrant Gap is of early middle Turonian age, and the Wall Creek is of late Turonian and early Coniacian ages. The main purpose of this report is to present biostratigraphic information from studies of the Frontier Formation in the Wind River Basin that could be useful for future stratigraphic investigations of the formation throughout Wyoming. Locations of outcrop sections and associated fossil collections are depicted on accompanying maps and aerial photographs. Graphic descriptions of strata in the outcrops and identifications of fossils from nearby localities also are presented. Those fossils named on the graphic sections commonly have the most restricted time-spans. Fossils collected near the outcrops studied are not always named on the enclosed graphic sections because (1) the specimens are less useful for dating the enclosing beds, (2) the specimens are duplicates, or (3) the specimens could not be related to specific strata in the sections. The names, locations, and members of the outcrop sections and the approximate ages of the constituent strata are summarized in table 1. The index maps used to show locations of outcrop sections and fossil collections are from scanned versions of U.S. Geological Survey topographic maps of various scales and were obtained from TerraServer®. The portion of each map used depended on the areal distribution of the localities involved. The named quadrangles used for locality descriptions, however, all refer to 7½-minute, 1:24,000-scale quadrangles (for example, “Alcova”). The aerial photographs also are from TerraServer®; http://www.terraserver.com/.

Wyoming↗
USGS2007

Source rock potential of upper cretaceous marine shales in the Wind River Basin, Wyoming: Chapter 8 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

Seventy-eight samples collected from marine shales from the Cretaceous Mowry Shale, the lower part of the Frontier Formation, and the lower shaly and upper sandy members of the Cody Shale in the Wind River Basin, Wyoming, were analyzed using Rock-Eval and total organic carbon analysis to determine the source rock potential. Results indicate that the Mowry Shale has a generative potential based on organic richness that is considered to be fair to very good, and hydrogen indices and S 2 /S 3 ratios indicate a capability to generate both oil and gas. Maps of the Mowry indicate that it is most organic rich and oil-prone in the eastern part of the basin. Results of total organic carbon and Rock-Eval analyses for the Frontier Formation indicate that it is composed of mainly type III gas-prone kerogen, with organic richness levels that are generally poor to fair. Results of similar analyses of samples from the lower shaly member of the Cody Shale show a generative potential ranging from fair to excellent, and hydrogen indices and S 2 /S 3 ratios indicate that it is capable of generating both oil and gas. Maps showing the distribution of kerogen types and organic richness for the lower shaly member of the Cody Shale are similar to the Mowry and show that lower shaly member of the Cody is more organic rich and more oil-prone in the eastern part of the basin. Analyses of samples of the upper sandy member of the Cody Shale indicate that it has little or no potential as a source rock. Thermal maturity mapping based on vitrinite reflectance measurements in the coal-bearing post-Cody Upper Cretaceous and Paleocene rocks shows that Upper Cretaceous marine shales in the deeper parts of the Wind River Basin are thermally mature to overmature with respect to hydrocarbon generation.

Wyoming↗
USGS2008

Modeling and dynamic monitoring of ecosystem performance in the Yukon River Basin

Central Alaska is ecologically sensitive and experiencing stress in response to marked regional warming. Resource managers would benefit from an improved ability to monitor ecosystem processes in response to climate change, fire, insect damage, and management policies and to predict responses to future climate scenarios. We have developed a method for analyzing ecosystem performance as represented by the growing season integral of normalized difference vegetation index (NDVI), which is a measure of greenness that can be interpreted in terms of plant growth or photosynthetic activity (gross primary productivity). The approach illustrates the status and trends of ecosystem changes and separates the influences of climate and local site conditions from the influences of disturbances and land management. We emphasize the ability to quantify ecosystem processes, not simply changes in land cover, across the entire period of the remote sensing archive (Wylie and others, 2008). The method builds upon remotely sensed measures of vegetation greenness for each growing season. By itself, however, a time series of greenness often reflects annual climate variations in temperature and precipitation. Our method seeks to remove the influence of climate so that changes in underlying ecological conditions are identified and quantified. We define an "expected ecosystem performance" to represent the greenness response expected in a particular year given the climate of that year. We distinguish "performance anomalies" as cases where the ecosystem response is significantly different from the expected ecosystem performance. Maps of the performance anomalies (fig. 1) and trends in the anomalies give valuable information on the ecosystems for land managers and policy makers at a resolution of 1 km to 250 m.

Fact Sheet↗
USGS1975

Flood of April 1975 at Meridian Township, Michigan

On April 18 between 5 p.m. and 12 p.m. Meridian Township experienced an intense rain storm that caused the Red Cedar River to overflow its banks resulting in extensive flooding. The Federal Disaster Assistance Administration report that five homes were destroyed, and 332 homes and 10 businesses damaged. Early estimates indicated that damages may be as high as $6.25 million. During the flood the U.S. Geological Survey obtained aerial photography and streamflow data to document the disaster. This report shows, on photomosaic base maps, the extent of flooding along the Red Cedar River and the lower reach of Pine Lake Outlet. Streamflow data obtained at the gaging station on the Red Cedar River at East Lansing, about 3/4 mile (1.2 km) downstream from the western margin of the report area, are given. Information provided within the report is useful in making decisions regarding use of flood plains in the area. It is one of a series of reports on the April 1975 flood in the Lansing metropolitan area.

Michigan↗
USGS2015

Sequence stratigraphic framework of upper pliocene to holocene sediments of the Los Angeles Basin, California: Implications for aquifer architecture

Executive Summary Groundwater provides more than one-third of the municipal water supply for the coastal Los Angeles Basin and defining the aquifer architecture is a high priority for ground-water managers. Sequence stratigraphy, the state-of-the-art method for delineating reservoir geometry and continuity in the petroleum industry, is now being incorporated into ground water resource assessments and environmental investigations. By evaluating subsurface data using sequence stratigraphy, the geometry and distribution of aquifer and aquitard sediments are linked to the original depositional processes that formed the sediments. Skyline Ridge, Inc., the U.S. Geological Survey (USGS), in cooperation with Los Angeles County Department of Public Works (LACDPW) and the Water Replenishment District of Southern California (WRDSC) completed an investigation of the Wilmington – Long Beach area by integrating data from new exploratory research boreholes, marine reflection seismic, vintage land reflection seismic, and high-resolution gravity measurements. Sequence stratigraphy is shown to define pathways for saltwater intrusion into freshwater coastal aquifers by integrating preexisting data with (1) the new borehole observations and (2) structural and physical properties data derived from the geophysical measurements. By constructing a series of seismic reflection and well log cross sections (presented as sheets), this investigation further defines and delineates ten sequences of Late Pliocene to Holocene age in the Wilmington – Long Beach area of the Los Angeles Basin. These sequences were first described by Ponti and others (2007), and the implications for sea water intrusion was discussed by Edwards and others (2009a). In addition, this investigation presents regional seismic facies – environment of deposition maps for the five youngest sequences: 1) the Dominquez Sequence; 2) the Mesa Sequence; 3) the Pacific Sequence; the Harbor Sequence; and 4) the Bent Spring Sequence. The stratigraphic framework established in the Wilmington – Long Beach area is extended into the Central Basin of the greater Los Angeles area by utilizing 1980s and older vintage petroleum exploration land seismic reflection data. Tying this data to the available groundwater monitoring well network in the Central and West Coast Basins demonstrate aquifer correlation problems, and may provide insights into establishing a more robust groundwater model for the greater Los Angeles Basin area.

Book↗
USGS2005

Nebraska, Kansas, and Oklahoma aeromagnetic and gravity maps and data: A web site for distribution of data

The Nebraska, Kansas, and Oklahoma aeromagnetic grid is constructed from grids that combine information collected in 28 separate aeromagnetic surveys conducted between 1954 and 1985. The data from these surveys are of varying quality. The design and specifications (terrain clearance, sampling rates, line spacing, and reduction procedures) varied from survey to survey depending on the purpose of the project and the technology of that time. Every attempt was made to acquire the data in digital form. Most of the available digital data were obtained from aeromagnetic surveys flown by the U.S. Geological Survey (USGS), flown on contract with the USGS, or were obtained from other Federal agencies and State universities. The Kansas data were flown by and acquired from the Kansas Geological Survey. Some of the 1954, 1963, and 1964 data are available only on hand-contoured maps and had to be digitized. These maps were digitized along flight-line/contour-line intersections, which is considered to be the most accurate method of recovering the original data. All surveys have been continued to 304.8 m (1,000 ft) above ground and then blended or merged together.

Kansas, Nebraska, Okalhoma↗
USGS2011

EAARL Coastal Topography-Cape Hatteras National Seashore, North Carolina, Post-Nor'Ida, 2009: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the National Park Service Southeast Coast Network's Cape Hatteras National Seashore in North Carolina, acquired post-Nor'Ida (November 2009 nor'easter) on November 27 and 29 and December 1, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2000

Global GIS database. Digital atlas of Central and South America

This CD-ROM contains a digital atlas of the countries of Central and South America. This atlas is part of a global database compiled from USGS and other data sources at the nominal scale of 1:1 million and is intended to be used as a regional-scale reference and analytical tool by government officials, researchers, the private sector, and the general public. The atlas includes free GIS software or may also be used with ESRI's ArcView software. Customized ArcView tools, specifically designed to make the atlas easier to use, are also included. The atlas contains the following datasets: country political boundaries, digital shaded relief map, elevation, slope, hydrology, locations of cities and towns, airfields, roads, railroads, utility lines, population density, geology, ecological regions, historical seismicity, volcanoes, ore deposits, oil and gas fields, climate data, landcover, vegetation index, and lights at night.

Data Series↗
USGS2012

Recent wetland land loss due to hurricanes: Improved estimates based upon multiple source images

The objective of this study was to provide a moderate resolution 30-m fractional water map of the Chenier Plain for 2003, 2006 and 2009 by using information contained in high-resolution satellite imagery of a subset of the study area. Indices and transforms pertaining to vegetation and water were created using the high-resolution imagery, and a threshold was applied to obtain a categorical land/water map. The high-resolution data was used to train a decision-tree classifier to estimate percent water in a lower resolution (Landsat) image. Two new water indices based on the tasseled cap transformation were proposed for IKONOS imagery in wetland environments and more than 700 input parameter combinations were considered for each Landsat image classified. Final selection and thresholding of the resulting percent water maps involved over 5,000 unambiguous classified random points using corresponding 1-m resolution aerial photographs, and a statistical optimization procedure to determine the threshold at which the maximum Kappa coefficient occurs. Each selected dataset has a Kappa coefficient, percent correctly classified (PCC) water, land and total greater than 90%. An accuracy assessment using 1,000 independent random points was performed. Using the validation points, the PCC values decreased to around 90%. The time series change analysis indicated that due to Hurricane Rita, the study area lost 6.5% of marsh area, and transient changes were less than 3% for either land or water. Hurricane Ike resulted in an additional 8% land loss, although not enough time has passed to discriminate between persistent and transient changes.

Louisana↗
USGS2019

Geologic map of the Hartsel Quadrangle, Park County, Colorado

The Hartsel quadrangle sits nearly in the center of the complex South Park Laramide structural basin. Generally, the basin can be described as an asymmetrical down-faulted feature, dipping to the east. It is bounded by two northwest-trending uplifts: the Sawatch uplift to the west and the Front Range uplift to the east. The west-verging Elkhorn thrust, which places Proterozoic intrusive and metamorphic rocks within the Front Range uplift over Phanerozoic sediments in the basin, passes just east of the quadrangle. Seismic data and deep oil and gas well logs indicate that a series of imbricate thrust faults extend west, and in front of, the Elk horn thrust fault. The Hartsel uplift is a westward-jutting structural salient of the Front Range uplift that brings Proterozoic rocks farther into the basin south of the town of Hartsel. The quadrangle also spans the late Paleozoic boundary between the central Colorado trough (DeVoto, 1972) to the west and Frontrangia (Mallory, 1958) to the east. The Neogene Rio Grande rift system lies to the west of South Park Basin in the upper Arkansas River valley. Examples of Neogene extension can be found throughout South Park, as described by Stark and others (1949), De Voto (1971), and Ruleman and others (2011). In addition, there is evidence of ongoing local deformation related to dissolution and possible collapse of Paleozoic evaporite deposits across much of the west side of the basin (Kirkham and others, 2012).

Colorado↗
USGS2021

U.S. Geological Survey science for the Wyoming Landscape Conservation Initiative—2018 annual report

The Wyoming Landscape Conservation Initiative (WLCI) was established in 2007 as a collaborative interagency partnership to develop and implement science-based conservation actions. During the past 11 years, partners from U.S. Geological Survey (USGS), State and Federal land management agencies, universities, and the public have collaborated to implement a long-term (more than 10 years) science-based program that assesses and enhances the quality and quantity of wildlife habitats in the southwest Wyoming region while facilitating responsible development. The USGS WLCI Science Team completes scientific research and develops tools that inform and support WLCI partner planning, decision making, and on-the-ground management actions. In fiscal year 2018, the USGS initiated 3 new projects and continued efforts on 21 ongoing science and web-development projects. The first new project was initiated to support Secretarial Order 3362 which calls on the USGS to assist Western States in mapping big-game migration corridors and developing new mapping tools. During 2018, the USGS hosted a workshop in Laramie, Wyoming, which included more than 70 State and Federal wildlife experts from Colorado, New Mexico, Texas, and Wyoming. Most of the mapping and migration tool curricula used in the workshop were derived from prior WLCI studies and mapping efforts of big-game migration movement in habitats undergoing large-scale energy development. The second new project was in response for WLCI partners to better understand sedimentation and hydrogeomorphic processes in a cold-desert headwater and the third new project was designed to improve our approach for people to access, manage, and analyze WLCI data and WLCI resource information. The USGS published 18 products (including peer-reviewed journal articles, USGS series publications, and data releases) and provided more than a dozen professional oral and poster presentations at scientific meetings and numerous informal presentations to WLCI partners at meetings and workshops. This report summarizes the objectives and status of each project and highlights the USGS 2018 accomplishments and products.

Wyoming↗
USGS2015

Newberry Volcano's youngest lava flows

Most of Newberry Volcano's youngest lava flows are found within the Newberry National Volcanic Monument in central Oregon. Established November 5, 1990, the monument is managed by the U.S. Forest Service as part of the Deschutes National Forest. Since 2011, a series of aerial surveys over the monument collected elevation data using lidar (light detection and ranging) technology, which uses lasers to directly measure the ground surface. These data record previously unseen detail in the volcano’s numerous lava flows and vents. On average, a laser return was collected from the ground’s surface every 2.17 feet (ft) with ±1.3 inches vertical precision. The central caldera is visible in the lower right corner of the center map, outlined by the black dashed line. The caldera collapsed about 75,000 years ago when massive explosions sent volcanic ash as far as the San Francisco Bay area and created a 3,000-ft-deep hole in the center of the volcano. The caldera is now partly refilled by Paulina and East Lakes, and the byproducts from younger eruptions, including Newberry Volcano’s youngest rhyolitic lavas, shown in red and orange. The majority of Newberry Volcano’s many lava flows and cinder cones are blanketed by as much as 5 feet of volcanic ash from the catastrophic eruption of Mount Mazama that created Crater Lake caldera approximately 7,700 years ago. This ash supports abundant tree growth and obscures the youthful appearance of Newberry Volcano. Only the youngest volcanic vents and lava flows are well exposed and unmantled by volcanic ash. More than one hundred of these young volcanic vents and lava flows erupted 7,000 years ago during Newberry Volcano’s northwest rift zone eruption.

Oregon↗
USGS1970

Water Resources Data for California, 1966, 1967, 1968; Part 3: Ground Water Records

Ground-water records for wells in California in which periodic measurements of water level have been made during the years 1966-68 are given in this report. The records were collected and processed by the U.S. Geological Survey, Water Resources Division, under the overall supervision of R. Stanley Lord, district chief in charge of water-resources investigations in California. Beginning with this report, water-level data will be released in the annual Geological Survey series "Water Resources Data for California." Prior records of water level and many additional well data are contained in the reports listed in the References section of this report. The observation-well program in California is carried on principally in cooperation with the several agencies listed on page III. In addition, several other agencies, also listed on page III, have provided data and their cooperation is gratefully acknowledged. Figure I shows, insofar as the map scale permits, the location of observation wells for which data are included in this report. The water-level records are arranged alphabetically by county, and for each county by valley or ground-water basin. Thus, each group of data pertains to a distinct ground-water area, as indicated by subheadings in the report. Under each subhead, the records are arranged numerically by well number.

California↗
USGS1997

Contrasts within an outlier-reef system: Evidence for differential quaternary evolution, south Florida windward margin, U.S.A.

Closely spaced, high-resolution, seismic-reflection profiles acquired off the upper Florida Keys (i.e., north) reveal a platform-margin reef-and-trough system grossly similar to, yet quite different from, that previously described off the lower Keys (i.e., south). Profiles and maps generated for both areas show that development was controlled by antecedent Pleistocene topography (presence or absence of an upper-slope bedrock terrace), sediment availability, fluctuating sea level, and coral growth rate and distribution. The north terrace is sediment-covered and exhibits linear, buried, low-relief, seismic features of unknown character and origin. The south terrace is essentially sediment-free and supports multiple, massive, high-relief outlier reefs. Uranium disequilibrium series dates on outlier-reef corals indicate a Pleistocene age (~83-84 ka). A massive Pleistocene reef with both aggradational (north) and progradational (south) aspects forms the modern margin escarpment landward of the terrace. Depending upon interpretation (the north margin-escarpment reef may or may not be an outlier reef), the north margin is either more advanced or less advanced than the south margin. During Holocene sea-level rise, Pleistocene bedrock was inundated earlier and faster first to the north (deeper offbank terrace), then to the south (deeper platform surface). Holocene overgrowth is thick (8 m) on the north outer-bank reefs but thin (0.3 m) on the south outlier reefs. Differential evolution resulted from interplay between fluctuating sea level and energy regime established by prevailing east-southeasterly winds and waves along an arcuate (ENE-WSW) platform margin.

Journal of Coastal Research↗
USGS1959

Annual water-level measurements in observation wells, 1951-1955, and atlas of maps showing changes in water levels for various periods from beginning of record through 1954, New Mexico

This report tabulates the annual measurements of water level in the observation wells in the various irrigated areas, primarily from 1951 through 1955. It summarizes changes in water level by discussion and with an atlas of nearly all the maps of change of water level for the period of record to 1955 for each area in which observations are being made. Included also are hydrographs for the period of record through 1954 of several selected wells in the various areas irrigated from ground-water sources. The annual measurements of water level before 1951, seasonal measurements, and daily records of water levels in wells equipped with recording gages have been published in an annual series of U. S. Geological Survey water-supply papers.

New Mexico↗