USGS Science⌕ Search

SEARCH · USGS Science

Results for “Water-Resources Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93Linked to original sources
USGS2001

The response of the Iao aquifer to ground-water development, rainfall, and land-use practices between 1940 and 1998, Island of Maui, Hawaii

Ground water pumped from the Iao aquifer has been used for agricultural purposes since 1948, and domestic purposes since 1955. In 1990, the Hawaii State Commission on Water Resource Management established a value of 20 million gallons per day for the sustainable yield of the aquifer. Water-level data from observation wells throughout the aquifer and information on the depth to and thickness of the transition zone between freshwater and saltwater at the Waiehu deep monitor well indicate that pumping rates near the sustainable yield value of 20 million gallons per day could result in saltwater intrusion in some pumped wells. Since the introduction of pumpage in 1948 and the reduction of recharge in 1980, water levels have declined, chloride concentrations of the pumped water have increased, and the transition zone between freshwater and saltwater has risen. Water levels declined by about 18 feet between 1940 and 1998 in the area near Iao Stream, and by as much as 6 feet between 1977 and 1997 in the vicinity of the major well fields near Waiehu Stream. Chloride concentrations of pumped water have risen at all the well fields, but are presently below the U.S. Environmental Protection Agency recommended standard of 250 milligrams per liter. The chloride concentration of water pumped from Mokuhau 2, however, was 460 milligrams per liter in late 1996 when pumping was halted at this well. The midpoint of the transition zone, as measured at the Waiehu deep monitor well, rose by about 108 feet between 1985 and 1998.

Hawaii↗
USGS2001

Concentration of selected sulfonylurea, sulfonamide, and imidazolinone herbicides, other pesticides, and nutrients in 71 streams, 5 reservoir outflows, and 25 wells in the Midwestern United States, 1998

Sulfonylurea (SU), sulfonamide (SA), and imidazolinone (IMI) herbicides are recently developed herbicides that function by inhibiting the action of a key plant enzyme, stopping plant growth, and eventually killing the plant. These compounds generally have low mammalian toxicity, but crop and non-crop plants demonstrate a wide range in sensitivity to SUs, SAs, and IMIs, with over a 10,000-fold difference in observed toxicity levels for some compounds. SUs, SAs, and IMIs are applied either pre- or post-emergence to crops commonly at 1/50th or less of the rate of other herbicides. Little is known about their occurrence, fate, or transport in surface water or ground water in the United States. To obtain information on the occurrence of SU, SA, and IMI herbicides in the Midwestern United States, 214 water samples were collected from 76 surface-water and 25 ground-water sites in 1998. These samples were analyzed for 16 SU, SA, and IMI herbicides by using highperformance liquid chromatography/mass spectrometry. Samples also were analyzed for 46 pesticides and pesticide degradation products and 13 herbicides and 10 herbicide degradates. At least 1 of the 16 SUs, SAs, or IMIs was detected at or above the method reporting limit of 0.010 microgram per liter (ug/L) in 83 percent of 133 stream samples. Imazethapyr was detected most frequently (69 percent of samples), followed by flumetsulam (65 percent of samples) and nicosulfuron (53 percent of samples). At least one SU, SA, or IMI herbicide was detected at or above the method reporting limit in 6 of 8 reservoir samples and 5 of 25 ground-water samples. SU, SA, and IMI herbicides occurred less frequently and at a fraction (often 1/50th or less) of the concentrations of other herbicides such as atrazine. Acetochlor, atrazine, cyanazine, and metolachlor were all detected in 95 percent or more of 136 stream samples.

Water-Resources Investigations Report↗
USGS2001

Relation of Mercury to Other Chemical Constituents in Ground Water in the Kirkwood-Cohansey Aquifer System, New Jersey Coastal Plain, and Mechanisms for Mobilization of Mercury from Sediments to Ground Water

Water from 265 domestic wells that tap the unconfined Kirkwood-Cohansey aquifer system in the Coastal Plain of New Jersey contained concentrations of mercury that are equal to or exceed the U.S. Environmental Protection Agency maximum contaminant level (MCL) of 2 ug/L (micrograms per liter). The wells range in depth from 50 to 200 feet, and are located in 32 discrete, mostly residential, areas that were developed primarily on former agricultural land during the 1950?s through the 1970?s. Concentrations in two other areas exceeded 1 ug/L. Naturally occurring mercury concentrations in ground water from the Kirkwood-Cohansey aquifer system typically are less than 0.01 ug/L, but concentrations in water from some wells were as much as 42 ug/L. No evidence currently exists that conclusively links known point sources such as landfills, industrial operations, or commercial enterprises to most of the elevated concentrations of mercury in ground water in the residential areas. Possible sources of the mercury include pesticides and atmospheric deposition. Analysis of water from wells in 6 of the 34 areas for other constituents indicates that nitrate concentrations also commonly are elevated above background levels (which typically are undetectable at 0.01 milligrams per liter), and exceed the MCL of 10 milligrams per liter in some samples. Several volatile organic compounds (VOCs), including chloroform, also have been measured in water from wells at many of the 34 sites. Analytical results for water samples collected at several depths from boreholes at 2 of the 34 sites indicate elevated concentrations of calcium, magnesium, barium, strontium, nitrate, and chloride, which may be related to both agricultural chemical applications and septic-system effluent. Determinations of tritium and helium concentrations indicate that water containing elevated concentrations of mercury recharged the aquifer between 9.4 and 79 years ago, which includes the period during which many of the 34 sites were undergoing a change from agricultural or undeveloped to residential land use. Batch equilibrium experiments were used to measure adsorption of dissolved mercury, mercuric chloride, and phenylmercuric acetate by aquifer sediments at pH 3.5-4.0, 4.5-5.0, and 5.5-6.0. In nearly all cases, 55 to 95 percent of the mercury added to the sediments was adsorbed. Mercury mobilization from aquifer sediments inoculated with mercury was investigated by leaching the sediments with two concentrations of nitric acid (a component of acid rain), a sodium chloride solution (simulating road salt), and three fertilizer solutions. A solution of 20-20-20 (nitrogenphosphorous-potassium) fertilizer removed virtually all of the mercury with which the sediments had been inoculated. The sodium chloride solution was moderately effective in removing applied mercury from the sediments, as was a solution of nitric acid. A more dilute nitric acid solution and two sodium nitrate fertilizer solutions were less effective. Results of these experiments indicate that mercury adsorbs to aquifer sediments, but that varying amounts can be removed by infiltrating solutions, some of which can be related to specific land uses. Land-use history at the 34 sites generally indicates a change from agricultural or undeveloped settings to residential settings. Whatever the source of mercury to these sites, a change in the geochemical environment of the soil and aquifer brought about by land-use change probably provides mechanisms for mobilizing the mercury from soils and sediments to ground water.

Water-Resources Investigations Report↗
USGS2001

Relation of shallow water quality in the Central Oklahoma Aquifer to geology, soils, and land use

The purpose of this report is to identify, describe, and explain relations between natural and land-use factors and ground-water quality in the Central Oklahoma aquifer NAWQA study unit. Natural factors compared to water quality included the geologic unit in which the sampled wells were completed and the properties of soils in the areas surrounding the wells. Land-use factors included types of land use and population densities surrounding sampled wells. Ground-water quality was characterized by concentrations of inorganic constituents, and by frequencies of detection of volatile organic compounds and pesticides. Water-quality data were from samples collected from wells 91 meters (300 feet) or less in depth as part of Permian and Quaternary geologic unit survey networks and from an urban survey network. Concentrations of many inorganic constituents were significantly related to geology. In addition, concentrations of many inorganic constituents were greater in water from wells from the Oklahoma City urban sampling network than in water from wells from low-density survey networks designed to evaluate ambient water quality in the Central Oklahoma aquifer study unit. However, sampling bias may have been induced by differences in hydrogeologic factors between sampling networks, limiting the ability to determine land-use effects on concentrations of inorganic constituents. Frequencies of detection of pesticide and volatile organic compounds (VOC's) in ground-water samples were related to land use and population density, with these compounds being more frequently detected in densely-populated areas. Geology and soil properties were not significantly correlated to pesticide or VOC occurrence in ground water. Lesser frequencies of detection of pesticides in water from wells in rural areas may be due to low to moderate use of those compounds on agricultural lands in the study unit, with livestock production being the primary agricultural activity. There are many possible sources of pesticides and VOC's in the urban areas of Central Oklahoma. Because only existing water-supply wells were sampled, it is not clear from the data collected whether pesticides and VOC's: (1) occur in low concentrations throughout upper portions of the aquifer in urban areas, or (2) are present in ground water only in the immediate vicinity of the wells due to back-flow of those chemicals into the wells or to inflow around cement seals and through gravel packs surrounding well casings of surface runoff containing those compounds.

Oklahoma↗
USGS2001

Numerical Simulation of Ground-Water Flow and Assessment of the Effects of Artificial Recharge in the Rialto-Colton Basin, San Bernardino County, California

The Rialto?Colton Basin, in western San Bernardino County, California, was chosen for storage of imported water because of the good quality of native ground water, the known storage capacity for additional ground-water storage in the basin, and the availability of imported water. To supplement native ground-water resources and offset overdraft conditions in the basin during dry periods, artificial-recharge operations during wet periods in the Rialto?Colton Basin were begun in 1982 to store surplus imported water. Local water purveyors recognized that determining the movement and ultimate disposition of the artificially recharged imported water would require a better understanding of the ground-water flow system. In this study, a finite-difference model was used to simulate ground-water flow in the Rialto?Colton Basin to gain a better understanding of the ground-water flow system and to evaluate the hydraulic effects of artificial recharge of imported water. The ground-water basin was simulated as four horizontal layers representing the river- channel deposits and the upper, middle, and lower water-bearing units. Several flow barriers bordering and internal to the Rialto?Colton Basin influence the direction of ground-water flow. Ground water may flow relatively unrestricted in the shallow parts of the flow system; however, the faults generally become more restrictive at depth. A particle-tracking model was used to simulate advective transport of imported water within the ground-water flow system and to evaluate three artificial-recharge alternatives. The ground-water flow model was calibrated to transient conditions for 1945?96. Initial conditions for the transient-state simulation were established by using 1945 recharge and discharge rates, and assuming no change in storage in the basin. Average hydrologic conditions for 1945?96 were used for the predictive simulations (1997?2027). Ground-water-level measurements made during 1945 were used for comparison with the initial-conditions simulation to determine if there was a reasonable match, and thus reasonable starting heads, for the transient simulation. The comparison between simulated head and measured water levels indicates that, overall, the simulated heads match measured water levels well; the goodness-of-fit value is 0.99. The largest differences between simulated head and measured water level occurred between Barrier H and the Rialto?Colton Fault. Simulated heads near the Santa Ana River and Warm Creek, and simulated heads northwest of Barrier J, generally are within 30 feet of measured water levels and five are within 20 feet. Model-simulated heads were compared with measured long-term changes in hydrographs of composite water levels in selected wells, and with measured short-term changes in hydrographs of water levels in multiple-depth observation wells installed for this project. Simulated hydraulic heads generally matched measured water levels in wells northwest of Barrier J (in the northwestern part of the basin) and in the central part of the basin during 1945?96. In addition, the model adequately simulated water levels in the southeastern part of the basin near the Santa Ana River and Warm Creek and east of an unnamed fault that subparallels the San Jacinto Fault. Simulated heads and measured water levels in the central part of the basin generally are within 10 feet until about 1982?85 when differences become greater. In the northwestern part of the basin southeast of Barrier J, simulated heads were as much as 50 feet higher than measured water levels during 1945?82 but matched measured water levels well after 1982. In the compartment between Barrier H and the Rialto?Colton Fault, simulated heads match well during 1945?82 but are comparatively low during 1982?96. Near the Santa Ana River and Warm Creek, simulated heads generally rose above measured water levels except during 1965?72 when simulated heads compared well with measured water levels. Average

Water-Resources Investigations Report↗
USGS2001

Analytical versus numerical estimates of water-level declines caused by pumping, and a case study of the Iao Aquifer, Maui, Hawaii

Comparisons were made between model-calculated water levels from a one-dimensional analytical model referred to as RAM (Robust Analytical Model) and those from numerical ground-water flow models using a sharp-interface model code. RAM incorporates the horizontal-flow assumption and the Ghyben-Herzberg relation to represent flow in a one-dimensional unconfined aquifer that contains a body of freshwater floating on denser saltwater. RAM does not account for the presence of a low-permeability coastal confining unit (caprock), which impedes the discharge of fresh ground water from the aquifer to the ocean, nor for the spatial distribution of ground-water withdrawals from wells, which is significant because water-level declines are greatest in the vicinity of withdrawal wells. Numerical ground-water flow models can readily account for discharge through a coastal confining unit and for the spatial distribution of ground-water withdrawals from wells. For a given aquifer hydraulic-conductivity value, recharge rate, and withdrawal rate, model-calculated steady-state water-level declines from RAM can be significantly less than those from numerical ground-water flow models. The differences between model-calculated water-level declines from RAM and those from numerical models are partly dependent on the hydraulic properties of the aquifer system and the spatial distribution of ground-water withdrawals from wells. RAM invariably predicts the greatest water-level declines at the inland extent of the aquifer where the freshwater body is thickest and the potential for saltwater intrusion is lowest. For cases in which a low-permeability confining unit overlies the aquifer near the coast, however, water-level declines calculated from numerical models may exceed those from RAM even at the inland extent of the aquifer. Since 1990, RAM has been used by the State of Hawaii Commission on Water Resource Management for establishing sustainable-yield values for the State?s aquifers. Data from the Iao aquifer, which lies on the northeastern flank of the West Maui Volcano and which is confined near the coast by caprock, are now available to evaluate the predictive capability of RAM for this system. In 1995 and 1996, withdrawal from the Iao aquifer reached the 20 million gallon per day sustainable-yield value derived using RAM. However, even before 1996, water levels in the aquifer had declined significantly below those predicted by RAM, and continued to decline in 1997. To halt the decline of water levels and to preclude the intrusion of salt-water into the four major well fields in the aquifer, it was necessary to reduce withdrawal from the aquifer system below the sustainable-yield value derived using RAM. In the Iao aquifer, the decline of measured water levels below those predicted by RAM is consistent with the results of the numerical model analysis. Relative to model-calculated water-level declines from numerical ground-water flow models, (1) RAM underestimates water-level declines in areas where a low-permeability confining unit exists, and (2) RAM underestimates water-level declines in the vicinity of withdrawal wells.

Hawaii↗
USGS2001

Factors affecting reservoir and stream-water quality in the Cambridge, Massachusetts, drinking-water source area and implications for source-water protection

This report presents the results of a study conducted by the U.S. Geological Survey, in cooperation with the city of Cambridge, Massachusetts, Water Department, to assess reservoir and tributary-stream quality in the Cambridge drinking-water source area, and to use the information gained to help guide the design of a comprehensive water-quality monitoring program for the source area. Assessments of the quality and trophic state of the three primary storage reservoirs, Hobbs Brook Reservoir, Stony Brook Reservoir, and Fresh Pond, were conducted (September 1997-November 1998) to provide baseline information on the state of these resources and to determine the vulnerability of the reservoirs to increased loads of nutrients and other contaminants. The effects of land use, land cover, and other drainage-basin characteristics on sources, transport, and fate of fecal-indicator bacteria, highway deicing chemicals, nutrients, selected metals, and naturally occurring organic compounds in 11 subbasins that contribute water to the reservoirs also was investigated, and the data used to select sampling stations for incorporation into a water-quality monitoring network for the source area. All three reservoirs exhibited thermal and chemical stratification, despite artificial mixing by air hoses in Stony Brook Reservoir and Fresh Pond. The stratification produced anoxic or hypoxic conditions in the deepest parts of the reservoirs and these conditions resulted in the release of ammonia nitrogen orthophosphate phosphorus, and dissolved iron and manganese from the reservoir bed sediments. Concentrations of sodium and chloride in the reservoirs usually were higher than the amounts recommended by the U.S. Environmental Protection agency for drinking-water sources (20 milligrams per liter for sodium and 250 milligrams per liter for chloride). Maximum measured sodium concentrations were highest in Hobbs Brook Reservoir (113 milligrams per liter), intermediate in Stony Brook Reservoir (62 milligrams per liter), and lowest in Fresh Pond (54 milligrams per liter). Bed sediments in Hobbs Brook and Stony Brook Reservoirs were enriched in iron, manganese, and arsenic relative to those in the impounded lower Charles River in Boston, Massachusetts. Trophic state indices, calculated for each reservoir based on nutrient concentrations, water-column transparency, and phytoplankton abundances, indicated that the upper and middle basins of Hobbs Brook Reservoir were moderately to highly productive and likely to produce algal blooms; the lower basin of Hobbs Brook Reservoir and Stony Brook Reservoir were similar and intermediate in productivity, and Fresh Pond was relatively unproductive and unlikely to produce algal blooms. This pattern is likely due to sedimentation of organic and inorganic particles in the three basins of Hobbs Brook Reservoir and in Stony Brook Reservoir. Molar ratios of nitrogen to phosphorus ranged from 55 in Stony Brook Reservoir to 120 in Hobbs Brook Reservoir, indicating that phytoplankton algae in these water bodies may be phosphorus limited and therefore sensitive to small increases in phosphorus loading from the drainage basin. Nitrogen loads were found to be less important than phosphorus to the trophic condition of the reservoirs. Hobbs Brook and Stony Brook, the two principle streams draining the Cambridge drinking-water source area, differed in their relative contributions to many of the estimated constituent loads. The estimated load of fecal coliform bacteria was more than seven times larger for the mainly residential Stony Brook subbasin upstream from Kendal Green, Mass., than it was for the more commercial and industrial Hobbs Brook subbasin, though the drainage areas of the two subbasins differ only by about 20 percent. The State standard for fecal coliform bacteria in streams in the Cambridge drinking-water source area (20 colony forming units per 100 milliliters) was exceeded at all sampling stations. Estimated s

Massachusetts↗
USGS2001

Simulation of flow in the upper North Coast Limestone Aquifer, Manati-Vega Baja area, Puerto Rico

A two-dimensional computer ground-water model was constructed of the Manati-Vega Baja area to improve the understanding of the unconfined upper aquifer within the North Coast Province of Puerto Rico. The modeled area covers approximately 79 square miles within the municipios of Manati and Vega Baja and small portions of Vega Alta and Barceloneta. Steady-state two-dimensional ground-water simulations were correlated to conditions prior to construction of the Laguna Tortuguero outlet channel in 1940 and calibrated to the observed potentiometric surface in March 1995. At the regional scale, the unconfined Upper North Coast Limestone aquifer is a diffuse ground-water flow system through the Aguada and Aymamon limestone units. The calibrated model input parameters for aquifer recharge varied from 2 inches per year in coastal areas to 18 inches per year in the upland areas south of Manati and Vega Baja. The calibrated transmissivity values ranged from less than 500 feet squared per day in the upland areas near the southern boundary to 70,000 feet squared per day in the areas west of Vega Baja. Increased ground-water withdrawals from 1.0 cubic foot per second for 1940 conditions to 26.3 cubic feet per second in 1995, has reduced the natural ground-water discharge to springs and wetland areas, and induced additional recharge from the rivers. The most important regional drainage feature is Laguna Tortuguero, which is the major ground-water discharge body for the upper aquifer, and has a drainage area of approximately 17 square miles. The discharge to the sea from Laguna Tortuguero through the outlet channel has been measured on a bi-monthly basis since 1974. The outflow represents a combination of ground- and surface-water discharge over the drainage area. Hydrologic conditions, prior to construction of the Laguna Tortuguero outlet channel in 1943, can be considered natural conditions with minimal ground-water pumpage (1.0 cubic foot per second), and heads in the lagoon were 2.4 feet higher. The model was calibrated to March 1995 conditions during a dry period of minimal aquifer recharge and relatively constant water levels in the upper aquifer. For the steady-state 1995 model simulation, however, ground-water pumpage had been increased to 26.3 cubic foot per second, due to increased demand for public water supply, the heads at 0.9 feet, and the outflow to the sea at Laguna Tortuguero had been lowered considerably. Simulated ground-water inflow for 1940 hydrologic conditions included 35.9 cubic feet per second from areal recharge, contributions from streamflow along the southern boundary of 1.6 cubic feet per second, and streamflow infiltration to the upper aquifer of 4.2 cubic feet per second. Simulated ground-water outflow for 1940 hydrologic conditions are discharge to springs of 17.4 cubic feet per second, total ground-water withdrawals of 1.0 cubic feet per second, and aquifer contribution to streamflow or wetland areas of 23.4 cubic feet per second. Simulated ground-water inflow for hydrologic conditions of March 1995 include d contributions from streamflow along the southern boundary of 1.6 cubic feet per second, areal recharge of 35.9 cubic feet per second, and streamflow infiltration to the upper aquifer of 11 cubic feet per second. Simulated ground-water outflow for hydrologic conditions of March 1995 are ground-water withdrawals of 26.3 cubic feet per second, discharge from springs of 7.3 cubic feet per second, and aquifer contribution to streamflow or wetland areas of 14 .9 cubic feet per second. The overall ground-water budget increased from 41.8 cubic feet per second for 1940 conditions to 48.6 cubic feet per second for the hydrologic conditions of March 1995. The increase in ground-water budget is a direct result of increased ground-water withdrawals, which induced greater streamflow infiltration. Simulated ground-water flux to Laguna Tortuguero for 1940 conditions was 11 cubic feet per second, which drop

Water-Resources Investigations Report↗
USGS2001

Saline contamination of soil and water on Pawnee tribal trust land, eastern Payne County, Oklahoma

The Bureau of Land Management reported evidence of saline contamination of soils and water in Payne County on Pawnee tribal trust land. Representatives of the Bureau of Land Management and U.S. Geological Survey inspected the site, in September 1997, and observed dead grass, small shrubs, and large trees near some abandoned oil production wells, a tank yard, an pit, and pipelines. Soil and bedrock slumps and large dead trees were observed near a repaired pipeline on the side of the steep slope dipping toward an unnamed tributary of Eagle Creek. The U.S. Geological Survey, in cooperation with the Bureau of Land Management, initiated an investigation in March 1998 to examine soil conductance and water quality on 160 acres of Pawnee tribal trust land where there was evidence of saline contamination and concern about saline contamination of the Ada Group, the shallowest freshwater aquifer in the area. The proximity of high specific conductance in streams to areas containing pipeline spill, abandoned oil wells, the tank yard, and the pit indicates that surface-water quality is affected by production brines. Specific conductances measured in Eagle Creek and Eagle Creek tributary ranged from 1,187 to 10,230 microsiemens per centimeter, with the greatest specific conductance measured downgradient of a pipeline spill. Specific conductance in an unnamed tributary of Salt Creek ranged from 961 to 11,500 microsiemens per centimeter. Specific conductance in three ponds ranged from 295 to 967 microsiemens per centimeter, with the greatest specific conductance measured in a pond located downhill from the tank yard and the abandoned oil well. Specific conductance in water from two brine storage pits ranged from 9,840 to 100,000 microsiemens per centimeter, with water from the pit near a tank yard having the greater specific conductance. Bartlesville brine samples from the oil well and injection well have the greatest specific conductance, chloride concentration, and dissolved solids concentrations, and plot the furthest from meteoric water on a graph of 8 deuterium and d 18oxygen. Waterflooding of the Bartlesville sand in the study area started in 1957 and continued until 1998. Waterflooding is the process of injecting brine water under pressure to drive the remaining oil to the production wells. The high dissolved solids concentration samples from observation wells 1, 3B, 5,7, and 8 could result from mixing of the Bartlesville brine from the waterfiood with meteoric water.

Water-Resources Investigations Report↗
USGS2000

Water quality of lakes in Voyageurs National Park, northern Minnesota, 1999

Water-quality samples were collected during July 1999 from selected lakes and bays, and the mouths of two rivers that flow into Voyageurs National Park in northern Minnesota. Results of laboratory analyses and field measurements of chemical and physical properties were compared to similar data collected during 1977-83. Water-quality data were evaluated for changes in specific conductance, alkalinity, nutrients, trace metals, bacteria, and trophic state. Specific conductance and alkalinity were similar to the 1977-83 period in much of the Park, but in some lakes and bays these properties may have been influenced by above normal runoff during summer 1999. Fecal-coliform bacteria colony counts were within guidelines for water-contact recreation. Nitrite plus nitrate nitrogen concentrations generally were lower throughout the Park and total phosphorus concentrations were lower in Kabetogama Lake and Black Bay relative to 1977-83. Concentrations of most trace metals were lower compared to 1977-83. Trophic state indices, based on chlorophyll a concentrations, indicated lower algal productivity throughout the Park. The largest changes in algal productivity, relative to 1977-83, were in Kabetogama Lake, Black Bay, and Sullivan Bay.

Minnesota↗
USGS2001

Sedimentation history of Waimaluhia Reservoir during highway construction, Oahu, Hawaii, 1983-98

Nine sedimentation surveys conducted from 1983 to 1998 at Waimaluhia Reservoir determined the rate of sediment accumulation in the reservoir during H-3 Highway construction upstream of the reservoir. Rates of storage-capacity loss ranged from 1.1 acre-feet per year between 1983 and 1988 to 4.9 acre-feet per year between 1988 and 1992. The average loss rate during the period of intensive construction between 1983 to 1992 was 2.7 acre-ft per year. The average loss rate during the study period between 1983 and 1998 equals the design loss rate of 2.0 acre-feet per year. The average bulk density of deposited sediments was 29 pounds per cubic foot. From the bulk density data, loss of storage capacity, and suspended-sediment data collected downstream of the reservoir, a total of 26,950 tons of sediment was delivered to the reservoir from 1983 to 1998, of which 19,100 tons were trapped in the reservoir. From these sediment loads, a sediment yield of 565 tons per square mile per year and trap efficiency of 71 percent were computed. A trap efficiency of 60 percent, bulk density of 65 pounds per cubic foot, and sediment yield of 1,500 tons per square mile per year were used to compute the design loss rate of 2.0 acre-feet per year.

Hawaii↗
USGS2001

Total Phosphorus Loads for Selected Tributaries to Sebago Lake, Maine

The streamflow and water-quality datacollection networks of the Portland Water District (PWD) and the U.S. Geological Survey (USGS) as of February 2000 were analyzed in terms of their applicability for estimating total phosphorus loads for selected tributaries to Sebago Lake in southern Maine. The long-term unit-area mean annual flows for the Songo River and for small, ungaged tributaries are similar to the long-term unit-area mean annual flows for the Crooked River and other gaged tributaries to Sebago Lake, based on a regression equation that estimates mean annual streamflows in Maine. Unit-area peak streamflows of Sebago Lake tributaries can be quite different, based on a regression equation that estimates peak streamflows for Maine. Crooked River had a statistically significant positive relation (Kendall's Tau test, p=0.0004) between streamflow and total phosphorus concentration. Panther Run had a statistically significant negative relation (p=0.0015). Significant positive relations may indicate contributions from nonpoint sources or sediment resuspension, whereas significant negative relations may indicate dilution of point sources. Total phosphorus concentrations were significantly larger in the Crooked River than in the Songo River (Wilcoxon rank-sum test, p<0.0001). Evidence was insufficient, however, to indicate that phosphorus concentrations from medium-sized drainage basins, at a significance level of 0.05, were different from each other or that concentrations in small-sized drainage basins were different from each other (Kruskal-Wallis test, p= 0.0980, 0.1265). All large- and medium-sized drainage basins were sampled for total phosphorus approximately monthly. Although not all small drainage basins were sampled, they may be well represented by the small drainage basins that were sampled. If the tributaries gaged by PWD had adequate streamflow data, the current PWD tributary monitoring program would probably produce total phosphorus loading data that would represent all gaged and ungaged tributaries to Sebago Lake. Outside the PWD tributary-monitoring program, the largest ungaged tributary to Sebago Lake contains 1.5 percent of the area draining to the lake. In the absence of unique point or nonpoint sources of phosphorus, ungaged tributaries are unlikely to have total phosphorus concentrations that differ significantly from those in the small tributaries that have concentration data. The regression method, also known as the rating-curve method, was used to estimate the annual total phosphorus load for Crooked River, Northwest River, and Rich Mill Pond Outlet for water years 1996-98. The MOVE.1 method was used to estimate daily streamflows for the regression method at Northwest River and Rich Mill Pond Outlet, where streamflows were not continuously monitored. An averaging method also was used to compute annual loads at the three sites. The difference between the regression estimate and the averaging estimate for each of the three tributaries was consistent with what was expected from previous studies.

Water-Resources Investigations Report↗
USGS2001

Concentrations of Escherichia coli in streams in the Kankakee and lower Wabash River watersheds in Indiana, June-September 1999

Water samples collected from 58 surface- water sites in the Kankakee and Lower Wabash River Watersheds from June through September 1999 were analyzed for concentrations of Escherichia coli bacteria. Each sitewas sampled five times in a 30-day period. Twentynine sites were sampled during June and July, and 29 different sites were sampled during August and September. A five-sample geometric mean of concentrations was computed for each site. Concentrations of Escherichia coli (E. coli) in 126 of the 289 samples exceeded the State of Indiana single-sample standard of 235 colonies per 100 milliliters for waters used for recreation. Concentrations in samples from 38 of the 58 sites exceeded the State of Indiana standard for a five-sample geometric mean of 125 colonies per 100 milliliters for waters used for recreation. Ten of the 58 sites were at or near U.S. Geological Survey streamflow-gaging stations. Based on records from the streamflowgaging stations, 18 percent of the samples collected at these sites were collected at streamflows above the median daily discharge for each station. E. coli concentrations and turbidity measurements collected during 1999 were analyzed in concert with similar concentration and turbidity data collected in 1998 at streams within the Upper Wabash River Watershed in Indiana to investigate the relation between concentrations of bacteria and turbidity. The analysis indicated a statistically significant correlation between concentrations of E. coli and turbidity. If the turbidity was greater than 83 nephelometric turbidity units, the E. coli concentration always exceeded the singlesample standard. If, however, the turbidity was less than 83 nephelometric turbidity units, concentrations of E. coli were not always below the single-sample standard.

Illinois, Indiana↗
USGS2002

Standards for the Analysis and Processing of Surface-Water Data and Information Using Electronic Methods

Surface-water computation methods and procedures are described in this report to provide standards from which a completely automated electronic processing system can be developed. To the greatest extent possible, the traditional U. S. Geological Survey (USGS) methodology and standards for streamflow data collection and analysis have been incorporated into these standards. Although USGS methodology and standards are the basis for this report, the report is applicable to other organizations doing similar work. The proposed electronic processing system allows field measurement data, including data stored on automatic field recording devices and data recorded by the field hydrographer (a person who collects streamflow and other surface-water data) in electronic field notebooks, to be input easily and automatically. A user of the electronic processing system easily can monitor the incoming data and verify and edit the data, if necessary. Input of the computational procedures, rating curves, shift requirements, and other special methods are interactive processes between the user and the electronic processing system, with much of this processing being automatic. Special computation procedures are provided for complex stations such as velocity-index, slope, control structures, and unsteady-flow models, such as the Branch-Network Dynamic Flow Model (BRANCH). Navigation paths are designed to lead the user through the computational steps for each type of gaging station (stage-only, stagedischarge, velocity-index, slope, rate-of-change in stage, reservoir, tide, structure, and hydraulic model stations). The proposed electronic processing system emphasizes the use of interactive graphics to provide good visual tools for unit values editing, rating curve and shift analysis, hydrograph comparisons, data-estimation procedures, data review, and other needs. Documentation, review, finalization, and publication of records are provided for with the electronic processing system, as well as archiving, quality assurance, and quality control.

Water-Resources Investigations Report↗
USGS2001

Ages and Origins of Calcite and Opal in the Exploratory Studies Facility Tunnel, Yucca Mountain, Nevada

Deposits of calcite and opal are present as coatings on open fractures and lithophysal cavities in unsaturated-zone tuffs at Yucca Mountain, Nevada, site of a potential high-level radioactive waste repository. Outermost layers of calcite and opal have radiocarbon ages of 16,000 to 44,000 years before present and thorium-230/uranium ages of 28,000 to more than 500,000 years before present. These ages are young relative to the 13-million-year age of the host rocks. Multiple subsamples from the same outer layer typically show a range of ages with youngest ages from the thinnest subsamples. Initial uranium-234/uranium-238 activity ratios between 1 and 9.5 show a distinct negative correlation with thorium-230/uranium age and are greater than 4 for all but one sample younger than 100,000 years before present. These data, along with micrometer-scale layering and distinctive crystal morphologies, are interpreted to indicate that deposits formed very slowly from water films migrating through open cavities. Exchanges of carbon dioxide and water vapor probably took place between downward-migrating liquids and upward-migrating gases at low rates, resulting in oversaturation of mineral constituents at crystal extremities and more or less continuous deposition of very thin layers. Therefore, subsamples represent mixtures of older and younger layers on a scale finer than sampling techniques can resolve. Slow, long-term rates of deposition (less than about 5 millimeters of mineral per million years) are inferred from subsamples of outermost calcite and opal. These growth rates are similar to those calculated assuming that total coating thicknesses of 10 to 40 millimeters accumulated over 12 million years. Calcite has a wide range of delta carbon-13 values from about -8.2 to 8.5 per mil and delta oxygen-18 values from about 10 to 21 per mil. Systematic microsampling across individual mineral coatings indicates basal (older) calcite tends to have the largest delta carbon-13 values and smallest delta oxygen-18 values compared to calcite from intermediate and outer positions. Basal calcite has relatively small strontium-87/strontium-86 ratios, between 0.7105 and 0.7120, that are similar to the initial isotopic compositions of the strontium-rich tuff units, whereas outer calcite has more radiogenic strontium-87/strontium-86 ratios between 0.7115 and 0.7127. Isotopic compositions of strontium, oxygen, and carbon in the outer (youngest) unsaturated-zone calcite are coincident with those measured in Yucca Mountain calcrete, which formed by pedogenic processes. The physical and isotopic data from calcite and opal indicate that they formed from solutions of meteoric origin percolating through a limited network of connected fracture pathways in the unsaturated zone rather than by inundation from ascending ground water originating in the saturated zone. Mineral assemblages, textures, and distributions within the unsaturated zone are distinctly different from those deposited below the water table at Yucca Mountain. The calcite and opal typically are present only on footwall surfaces of a small fraction of fractures and only on floors of a small fraction of lithophysal cavities. The similarities in the carbon, oxygen, and strontium isotopic compositions between fracture calcite and soil-zone calcite, as well as the gradation of textures from detritus-rich micrite in the soil to detritus-free spar 10 to 30 meters below the surface, also support a genetic link between the two depositional environments. Older deposits contain oxygen isotope compositions that indicate elevated temperatures of mineral formation during the early stages of deposition; however, in the youngest deposits these values are consistent with deposition under geothermal gradients similar to modern conditions. Correlations between mineral ages and varying Pleistocene climate conditions are not apparent from the current data. Cumulative evidence from calcite and opal deposits indicate

Water-Resources Investigations Report↗
USGS2001

User's Guide for Mixed-Size Sediment Transport Model for Networks of One-Dimensional Open Channels

This user's guide describes a mathematical model for predicting the transport of mixed sizes of sediment by flow in networks of one-dimensional open channels. The simulation package is useful for general sediment routing problems, prediction of erosion and deposition following dam removal, and scour in channels at road embankment crossings or other artificial structures. The model treats input hydrographs as stepwise steady-state, and the flow computation algorithm automatically switches between sub- and supercritical flow as dictated by channel geometry and discharge. A variety of boundary conditions including weirs and rating curves may be applied both external and internal to the flow network. The model may be used to compute flow around islands and through multiple openings in embankments, but the network must be 'simple' in the sense that the flow directions in all channels can be specified before simulation commences. The location and shape of channel banks are user specified, and all bedelevation changes take place between these banks and above a user-specified bedrock elevation. Computation of sediment-transport emphasizes the sand-size range (0.0625-2.0 millimeter) but the user may select any desired range of particle diameters including silt and finer (<0.0625 millimeter). As part of data input, the user may set the original bed-sediment composition of any number of layers of known thickness. The model computes the time evolution of total transport and the size composition of bed- and suspended-load sand through any cross section of interest. It also tracks bed -surface elevation and size composition. The model is written in the FORTRAN programming language for implementation on personal computers using the WINDOWS operating system and, along with certain graphical output display capability, is accessed from a graphical user interface (GUI). The GUI provides a framework for selecting input files and parameters of a number of components of the sediment-transport process. There are no restrictions in the use of the model as to numbers of channels, channel junctions, cross sections per channel, or points defining the cross sections. Following completion of the simulation computations, the GUI accommodates display of longitudinal plots of either bed elevation and size composition, or of transport rate and size composition of the various components, for individual channels and selected times during the simulation period. For individual cross sections, the GUI also allows display of time series of transport rate and size composition of the various components and of bed elevation and size composition.

Water-Resources Investigations Report↗
USGS2001

Simulated Ground-Water-Flow Responses to Geohydrologic Characteristics, Corinna, Maine

Ground-water-flow simulations of an idealization of surficial and bedrock aquifers of the East Branch Sebasticook River Valley, in Corinna, Maine, were done to test the effects of known or hypothesized geohydrologic characteristics on the local and regional ground-water-flow system. The purpose of the simulations was to develop a better understanding of the aquifer system to aid in planning for the eventual removal of contaminants. The effects of eight individual geohydrologic characteristics on simulated ground-water flow were compared with a base simulation. The eight geohydrologic characteristics simulated were (1) a northeast-southwest transmissive bedding- plane fracture system, (2) a northwest-southeast valley floor transmissive fracture zone, (3) an upper weathered bedrock transmissive zone, (4) river- and pond-stage changes, (5) river- and pondbottom conductivity changes, (6) multiple withdrawals, (7) a combination of some of these characteristics, and (8) relocation of a pond-outlet stream. The effects of many of the analyzed characteristics are slight or relatively minor with respect to a simulated bedrock aquifer. The simulated ground-water flow through the bedrock aquifer is a small percentage (about 1 percent) of the total flow to the system; therefore, the effects of most geohydrologic characteristics simulated are minimal in the aquifer. Some characteristics, for example, anisotropy imparted on the bedrock system by a northeast-southwest transmissive bedding-plane fracture system, strongly affect flow patterns in the bedrock aquifer but not in the surficial aquifer. Individually, most of the geohydrologic characteristics evaluated only slightly affect the groundwater flow in the bedrock; however, in combination, these characteristics significantly affected the entire simulated ground-water-flow system. Domestic or remedial withdrawal wells generally had little effect on the regional ground-water-flow system but did affect the local ground-water-flow patterns, which could affect the extent and movement of contaminants.

Water-Resources Investigations Report↗