USGS Science⌕ Search

SEARCH · USGS Science

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93Linked to original sources

Geologic map of the Mound Spring quadrangle, Nye and Clark Counties, Nevada, and Inyo County, California

The Mound Spring quadrangle, the southwestern-most 7.5' quadrangle of the area of the Las Vegas 1:100,000-scale quadrangle, is entirely within the Pahrump Valley, spanning the Nevada/California State line. New geologic mapping of the predominantly Quaternary materials is combined with new studies of gravity and geochronology in this quadrangle. Eleven predominantly fine-grained units are delineated, including playa sediment, dune sand, and deposits associated with several cycles of past groundwater discharge and distal fan sedimentation. These units are intercalated with 5 predominantly coarse-grained alluvial-fan and wash gravel units mainly derived from the Spring Mountains. The gravel units are distinguished on the basis of soil development and associated surficial characteristics. Thermoluminescence and U-series geochronology constrain most of the units to the Holocene and late and middle Pleistocene. Deposits of late Pleistocene groundwater discharge in the northeast part of the quadrangle are associated with a down-to-the-southwest fault zone that is expressed by surface fault scarps and a steep gravity gradient. The gravity field also defines a northwest-trending uplift along the State line, in which the oldest sediments are poorly exposed. About 2 km to the northeast a prominent southwest-facing erosional escarpment is formed by resistant beds in middle Pleistocene fine-grained sediments that dip northeast away from the uplift. These sediments include cycles of groundwater discharge that were probably caused by upwelling of southwesterly groundwater flow that encountered the horst.

Miscellaneous Field Studies Map↗

Generalized surficial geologic map of the Denver 1° x 2° quadrangle, Colorado

Thirty-nine types of surficial geologic deposits and residual materials of Quaternary age are described and mapped in the greater Denver area, in part of the Front Range, and in the piedmont and plains east of Denver, Boulder, and Castle Rock. Descriptions appear in the pamphlet that accompanies the map. Landslide deposits, colluvium, residuum, alluvium, and other deposits or materials are described in terms of predominant grain size, mineral or rock composition (e.g., gypsiferous, calcareous, granitic, andesitic), thickness of deposits, and other physical characteristics. Origins and ages of the deposits and geologic hazards related to them are noted. Many lines between geologic units on our map were placed by generalizing contacts on published maps. However, in 1997-1999 we mapped new boundaries, as well. The map was projected to the UTM projection. This large map area extends from the Continental Divide near Winter Park and Fairplay (on the west edge), eastward about 107 mi (172 km); and extends from Boulder on the north edge to Woodland Park at the south edge (68 mi; 109 km).

Colorado↗

Log and data from a trench across the Hubbell Spring Fault Zone, Bernalillo County, New Mexico

This report contains field and laboratory data resulting from a trench study of the Hubbell Spring fault zone near Albuquerque, New Mexico. This trench was excavated in September, 1997, as part of earthquake hazards investigations of Quaternary faults in the Albuquerque metropolitan area. The trench was excavated across the youngest of several fault strands near the northern end of the Hubbell Spring fault zone. The site is located on Pueblo of Isleta tribal lands, approximately 1 km south of the southern boundary of Kirtland Air Force Base. Thus the paleoearthquake data derived from investigations at the Hubbell Spring site will be useful in assessing potential earthquake hazards in Isleta Pueblo, Kirtland Air Force Base/Sandia National Laboratories, and the Albuquerque metropolitan area. The purpose of this report is to present a detailed trench log, a scarp profile, soils data (table 1), magnetic susceptibility data (table 2), luminescence and uranium-series ages (tables 3 and 4), and detailed unit descriptions (table 5) obtained in this investigation. S.F. Personius had primary responsibility for siting, excavating, describing, and interpreting the trench; S.A. Mahan did the luminescence dating, and James B. Paces did the uranium-series dating. M.C. Eppes and D.W. Love assisted with trench logging and mapping; and M.C. Eppes, D.K. Mitchell, and A. Murphy did the soils analyses.

New Mexico↗

Hydrostructural maps of the Death Valley regional flow system, Nevada and California

The locations of principal faults and structural zones that may influence ground-water flow were compiled in support of a three-dimensional ground-water model for the Death Valley regional flow system (DVRFS), which covers 80,000 square km in southwestern Nevada and southeastern California. Faults include Neogene extensional and strike-slip faults and pre-Tertiary thrust faults. Emphasis was given to characteristics of faults and deformed zones that may have a high potential for influencing hydraulic conductivity. These include: (1) faulting that results in the juxtaposition of stratigraphic units with contrasting hydrologic properties, which may cause ground-water discharge and other perturbations in the flow system; (2) special physical characteristics of the fault zones, such as brecciation and fracturing, that may cause specific parts of the zone to act either as conduits or as barriers to fluid flow; (3) the presence of a variety of lithologies whose physical and deformational characteristics may serve to impede or enhance flow in fault zones; (4) orientation of a fault with respect to the present-day stress field, possibly influencing hydraulic conductivity along the fault zone; and (5) faults that have been active in late Pleistocene or Holocene time and areas of contemporary seismicity, which may be associated with enhanced permeabilities. The faults shown on maps A and B are largely from Workman and others (in press), and fit one or more of the following criteria: (1) faults that are more than 10 km in map length; (2) faults with more than 500 m of displacement; and (3) faults in sets that define a significant structural fabric that characterizes a particular domain of the DVRFS. The following fault types are shown: Neogene normal, Neogene strike-slip, Neogene low-angle normal, pre-Tertiary thrust, and structural boundaries of Miocene calderas. We have highlighted faults that have late Pleistocene to Holocene displacement (Piety, 1996). Areas of thick Neogene basin-fill deposits (thicknesses 1-2 km, 2-3 km, and >3 km) are shown on map A, based on gravity anomalies and depth-to-basement modeling by Blakely and others (1999). We have interpreted the positions of faults in the subsurface, generally following the interpretations of Blakely and others (1999). Where geophysical constraints are not present, the faults beneath late Tertiary and Quaternary cover have been extended based on geologic reasoning. Nearly all of these concealed faults are shown with continuous solid lines on maps A and B, in order to provide continuous structures for incorporation into the hydrogeologic framework model (HFM). Map A also shows the potentiometric surface, regional springs (25-35 degrees Celsius, D'Agnese and others, 1997), and cold springs (Turner and others, 1996).

Nevada;California↗

Generalized surficial geologic map of the Pueblo 1° x 2° quadrangle, Colorado

Fifty-three types of surficial geologic deposits and residual materials of Quaternary age are described in a pamphlet and located on a map of the greater Pueblo area, in part of the Front Range, in the Wet and Sangre de Cristo Mountains, and on the plains east of Colorado Springs and Pueblo. Deposits formed by landslides, wind, and glaciers, as well as colluvium, residuum, alluvium, and others are described in terms of predominant grain size, mineral or rock composition (e.g., gypsiferous, calcareous, granitic, andesitic), thickness, and other physical characteristics. Origins and ages of the deposits and geologic hazards related to them are noted. Many lines drawn between units on our map were placed by generalizing contacts on published maps. However, in 1997-1999 we mapped new boundaries as well. The map was projected to the UTM projection. This large map area extends from near Salida (on the west edge), eastward about 107 mi (172 km), and from Antero Reservoir and Woodland Park on the north edge to near Colorado City at the south edge (68 mi; 109 km).

Colorado↗

Geologic map of the Pinedale quadrangle, McKinley County, New Mexico

The 1:24,000-scale geologic map of the Pinedale 7.5' quadrangle lies in the western part of the Grants uranium mineral belt, which was mapped and studied under a cooperative agreement between the USGS and the U.S. Department of Energy. A spectacular panoramic view of the southern half of the Pinedale quadrangle is obtained looking northward from Interstate Highway 40, particularly from the New Mexico State travelers' rest stop near the Shell Oil Company's Ciniza Refinery, 28.5 kilometers (17.8 miles) east of Gallup. A west-trending escarpment, 200 meters high, of massive red sandstone, rises above a broad valley, its continuity broken only by a few deep and picturesque canyons in the western half of the quadrangle. The escarpment is formed by the eolian Entrada Sandstone of Late Jurassic age. The Entrada unconformably overlies the Chinle Formation of Late Triassic age, which occupies the valley below. The Chinle Formation consists of cherty mottled limestone and mudstone of the Owl Rock Member and underlying, poorly consolidated, red to purple fluvial siltstone, mudstone, and sandstone beds of the Petrified Forest Member. The pinyon- and juniper-covered bench that tops the escarpment is underlain by the Todilto Limestone. A quarry operation, located just north of the Indian community of Iyanbito in the southwestern part of the quadrangle, produces crushed limestone aggregate for highway construction and railroad ballast. Beyond the escarpment to the north and rising prominently above it, is the northwest-trending Fallen Timber Ridge. Near the west side of the quadrangle lie the peaks of Midget Mesa, and Mesa Butte, the latter of which has the highest altitude in the area at 2,635 meters (8,030 feet) above sea level. The prominences are capped by buff-colored resistant beds of the Dakota Sandstone of Late Cretaceous age, containing some interbedded coal. These beds unconformably overlie the uranium-bearing Morrison Formation, which consists of red, green, and gray shale, orange feldspathic sandstone, and green tuffaceous mudstone, deposited in ancient lakes, alluvial fans, and rivers during the Upper Jurassic Period. Thick, crossbedded, white beds of the Cow Springs Sandstone, derived from ancient windblown desert sands, underlie the Morrison. In the northern part of the quadrangle, the Dakota Sandstone is overlain by gray Mancos Shale and yellowish-gray Two Wells and Gallup Sandstones that were deposited in Late Cretaceous seas. Unconsolidated deposits of Quaternary age are found throughout the quadrangle in talus, slope wash, fans, valley alluviums, pediments, and as windblown sands in dunes and blanket deposits. The strata conform to the regional dip of about three degrees to north, except where they are down-folded some 200 meters along the Pinedale monocline, whose limbs follow a sinuous west-northwest trend across the northern half of the quadrangle. The monocline is beautifully exposed at Pinedale, where it shows as much as 20 degrees dip on the pine-studded bare rock slope of the Two Wells Sandstone. A north-plunging broad anticline and accompanying syncline is developed in the east-central part of the quadrangle but dies out against the monocline. A minor fault, with barely 3 meters of vertical displacement, extends several kilometers westward across the Todilto Limestone bench. A large landslide mass, 1.5 kilometers long by 0.7 kilometers wide occurs in the Mancos Shale west of Pinedale. Exploration drilling for uranium in the Morrison Formation has been extensive in the quadrangle, particularly north of the monocline, which adjoins the Old Church Rock mine area, west northwest of the quadrangle.

Miscellaneous Field Studies Map↗

Geologic map of the Bonners Ferry 30' x 60' quadrangle, Idaho and Montana

This data set maps and describes the geology of the Bonners Ferry 30' x 60' quadrangle, Idaho and Montana. The bedrock geology of the Bonners Ferry quadrangle consists of sedimentary, metamorphic, and granitic rocks ranging in age from Middle Proterozoic to Eocene. Bedrock units include rocks of (1) the Middle Proterozoic Belt Supergroup (2) the Middle Proterozoic Deer Trail Group, (3) the Late Proterozoic Windermere Group, (4) miogeoclinal or shelf facies lower Paleozoic rocks, and (5) Mesozoic and Tertiary granitic rocks. The Belt Supergroup, a thick sequence of argillite, siltite, quartzite, and impure carbonate rocks up to 9,000 m thick, occurs in two non-contiguous sequences in the quadrangle: (1) the Clark Fork-Eastport Sequence east of the Purcell trench and (2) the Newport Sequence in the hanging wall of the Newport Fault. Only the two lowest Belt formations of the Newport Sequence are found in the Bonners Ferry quadrangle, but these two units are part of a continuous section, which extends southwestward to the town of Newport. Belt Supergroup rocks of the Clark Fork-Eastport Sequence are separated from those of the Newport Sequence by the Newport Fault, Priest River Complex, and Purcell Trench Fault. Some formations of the Belt Supergroup show differences in thickness and (or) lithofacies from one sequence to the other that are greater than those predicted from an empirical depositional model for the distances currently separating the sequences. These anomalous thickness and facies differences suggest that there has been a net contraction along structures separating the sequences despite Eocene extension associated with emplacement of the Priest River Complex. In addition to these two Belt sequences, probable Belt rocks are present in the Priest River Complex as high metamorphic grade crystalline schist and gneiss. Northwest of the Newport Sequence of Belt Supergroup is the Deer Trail Group, a distinct Middle Proterozoic sequence of argillite, siltite, quartzite, and carbonate rocks lithostratigraphically similar to the Belt Supergroup, but separated from all Belt Supergroup rocks by the Jumpoff Joe Fault. Rocks of the Deer Trail Group are pervasively phyllitic and noticeably more deformed than rocks in the Belt Supergroup sequences. Lithostratigraphically the Deer Trail Group is equivalent to part of the upper part of the Belt Supergroup. Differences in lithostratigraphy and thickness between individual Deer Trail and Belt units and between the Deer Trail and Belt sequences as a whole indicate that they were probably much farther apart when they were deposited. The Windermere Group is a lithologically varied sequence of volcanic rocks and coarse-grained, mostly immature, clastic sedimentary rocks up to 8,000 m thick. It is characterized by extreme differences in thickness and lithofacies over short distances caused by syndepositional faulting associated with initial stages of continental rifting in the Late Proterozoic. Strata of the Windermere Group unconformably overlie only the Deer Trail Group, and are nowhere found in depositional contact with Belt Supergroup rocks. Paleozoic rocks in the Bonners Ferry quadrangle consist of a thin, fault-bounded remnant preserved within the Clark Fork-Eastport Belt Supergroup Sequence. Mesozoic granitic rocks underlie at least 50 percent of the Bonners Ferry quadrangle. They fall into two petrogenetic suites, hornblende-biotite plutons and muscovite-biotite (two-mica) plutons, most of which are Cretaceous in age. Both suites are represented in the mid-crustal Priest River Complex and in the higher level plutons that flank the complex; by far the majority of the Priest River Complex are Cretaceous, two-mica bodies. Tertiary rocks are restricted to a single small stock, numerous hypabyssal dikes that are too small to show at the scale of the map, and to cataclastic rocks related to the Newport Fault. Quaternary deposits include unconsolidated to poorl

Miscellaneous Field Studies Map↗

Geologic map of the Phosphate Reserve in the Lander area, Fremont County, Wyoming

The area was mapped as part of the U.S. Geological Survey program of classifying and evaluating lands in the public domain. Resources of economic interest in the map area include oil, gas, water, phosphate rock, gypsum, and analcime. The area mapped includes the rocks between the Tensleep Sandstone and the Morrison Formation and Tertiary and Quaternary deposits.

Wyoming↗

Water-level data for the Albuquerque Basin and adjacent areas, central New Mexico, period of record through 1999

The Albuquerque Basin, located in central New Mexico, is about 100 miles long and 25 to 40 miles wide. The basin is defined as the extent of consolidated and unconsolidated deposits of Tertiary and Quaternary age that encompass the structural Rio Grande Rift within the basin. Drinking-water supplies throughout the Albuquerque Basin are obtained solely from ground-water resources. An increase in the population of about 35 percent from 1980 to 1990 has resulted in an increased demand for water. From April 1982 through September 1983, a network of wells was established to monitor changes in ground-water levels throughout the Albuquerque Basin. This network consisted of 6 wells with analog-to-digital recorders and 27 wells where water levels were measured monthly. Currently (1999), the network consists of 221 wells and piezometers. U.S. Geological Survey personnel collect water-level measurements at sites 1-88 and sites 165-221. Water-level and other data for sites 89-164 are measured by other agencies and reported to the USGS.

Open-File Report↗

Preliminary report on geophysics of the Verde River headwaters region, Arizona

This report summarizes the acquisition, data processing, and preliminary interpretation of a high-resolution aeromagnetic and radiometric survey near the confluence of the Big and Little Chino basins in the headwaters of the Verde River, Arizona. The goal of the aeromagnetic study is to improve understanding of the geologic framework as it affects groundwater flow, particularly in relation to the occurrence of springs in the upper Verde River headwaters region. Radiometric data were also collected to map surficial rocks and soils, thus aiding geologic mapping of the basin fill. Additional gravity data were collected to enhance existing coverage. Both aeromagnetic and gravity data indicate a large gradient along the Big Chino fault, a fault with Quaternary movement. Filtered aeromagnetic data show other possible faults within the basin fill and areas where volcanic rocks are shallowly buried. Gravity lows associated with Big Chino and Williamson Valleys indicate potentially significant accumulations of low-density basin fill. The absence of a gravity low associated with Little Chino Valley indicates that high-density rocks are shallow. The radiometric maps show higher radioactivity associated with the Tertiary latites and with the sediments derived from them. The surficial materials on the eastern side of the Big Chino Valley are significantly lower in radioactivity and reflect the materials derived from the limestone and basalt east of the valley. The dividing line between the low radioactivity materials to the east and the higher radioactiviy materials to the west coincides approximately with the major drainage system of the valley, locally known as Big Chino Wash. This feature is remarkably straight and is approximately parallel to the Big Chino Fault. The uranium map shows large areas with concentrations greater than 5 ppm eU, and we expect that these areas will have a significantly higher risk potential for indoor radon.

Arizona↗

Bathymetric, geophysical and geologic sample data from Medicine Lake, Siskiyou County, northern California

In September, 1999, the U.S. Geological Survey acquired high-resolution bathymetry, seismic reflection profiles, and geologic sample data from Medicine Lake, a high altitude (2,036 m) lake located within the summit caldera/basin at Medicine Lake volcano (MLV), a dormant Quaternary shield volcano located in the Cascade Range, 50 km northeast of Mt. Shasta. It last erupted less than 1000 years ago.The purpose of this work was to assess whether sediments in the lake might provide a high-resolution record of the climate, volcanic and geochemical (particularly mercury) history of the region. We are still working with our data to assess whether the sediments are appropriate for further study. This report provides a summary of what we have learned to date.

California↗

Water-level data for the Albuquerque Basin and adjacent areas, central New Mexico, period of record through 2000

The Albuquerque Basin, located in central New Mexico, is about 100 miles long and 25 to 40 miles wide. The basin is defined as the extent of consolidated and unconsolidated deposits of Tertiary and Quaternary age that encompass the structural Rio Grande Rift within the basin. Drinking-water supplies throughout the Albuquerque Basin are obtained solely from ground- water resources. An increase of about 35 percent in the population from 1980 to 1990 has resulted in an increased demand for water. From April 1982 through September 1983, a network of wells was established to monitor changes in ground-water levels throughout the Albuquerque Basin. This network consisted of 6 wells with analog- to-digital recorders and 27 wells where water levels were measured monthly. Currently (2000), the network consists of 221 wells and piezometers. U.S. Geological Survey personnel collect water- level measurements at sites 1-88 and sites 165-221. Water-level and other data for sites 89-164 are measured by other agencies and reported to the U.S. Geological Survey.

Open-File Report↗

Density and velocity relationships for digital sonic and density logs from coastal Washington and laboratory measurements of Olympic Peninsula mafic rocks and greywackes

Three-dimensional velocity models for the basins along the coast of Washington and in Puget Lowland provide a means for better understanding the lateral variations in strong ground motions recorded there. We have compiled 16 sonic and 18 density logs from 22 oil test wells to help us determine the geometry and physical properties of the Cenozoic basins along coastal Washington. The depth ranges sampled by the test-well logs fall between 0.3 and 2.1 km. These well logs sample Quaternary to middle Eocene sedimentary rocks of the Quinault Formation, Montesano Formation, and Hoh rock assemblage. Most (18 or 82%) of the wells are from Grays Harbor County, and many of these are from the Ocean City area. These Grays Harbor County wells sample the Quinault Formation, Montesano Formation, and frequently bottom in the Hoh rock assemblage. These wells show that the sonic velocity and density normally increase significantly across the contacts between the Quinault or the Montesano Formations and the Hoh rock assemblage. Reflection coefficients calculated for vertically traveling compressional waves from the average velocities and densities for these units suggest that the top of the Hoh rock assemblage is a strong reflector of downward-propagating seismic waves: these reflection coefficients lie between 11 and 20%. Thus, this boundary may reflect seismic energy upward and trap a substantial portion of the seismic energy generated by future earthquakes within the Miocene and younger sedimentary basins found along the Washington coast. Three wells from Jefferson County provide data for the Hoh rock assemblage for the entire length of the logs. One well (Eastern Petroleum Sniffer Forks #1), from the Forks area in Clallam County, also exclusively samples the Hoh rock assemblage. This report presents the locations, elevations, depths, stratigraphic, and other information for all the oil test wells, and provides plots showing the density and sonic velocities as a function of depth for each well log. We also present two-way traveltimes for 15 of the wells calculated from the sonic velocities. Average velocities and densities for the wells having both logs can be reasonably well related using a modified Gardner’s rule, with p=1825v(1/4), where p is the density (in kg/m3) and v is the sonic velocity (in km/s). In contrast, a similar analysis of published well logs from Puget Lowland is best matched by a Gardner’s rule of p=1730v(1/4), close to the p=1740v(1/4) proposed by Gardner et al. (1974). Finally, we present laboratory measurements of compressional-wave velocity, shear-wave velocity, and density for 11 greywackes and 29 mafic rocks from the Olympic Peninsula and Puget Lowland. These units have significance for earthquake-hazard investigations in Puget Lowland as they dip eastward beneath the Lowland, forming the “bedrock” beneath much of the lowland. Average Vp/Vs ratios for the mafic rocks, mainly Crescent Formation volcanics, lie between 1.81 and 1.86. Average Vp/Vs ratios for the greywackes from the accretionary core complex in the Olympic Peninsula show greater scatter but lie between 1.77 and 1.88. Both the Olympic Peninsula mafic rocks and greywackes have lower shear-wave velocities than would be expected for a Poisson solid (Vp/Vs=1.732). Although the P-wave velocities and densities in the greywackes can be related by a Gardner’s rule of p=1720v(1/4), close to the p=1740v(1/4) proposed by Gardner et al. (1974), the velocities and densities of the mafic rocks are best related by a Gardner’s rule of p=1840v(1/4). Thus, the density/velocity relations are similar for the Puget Lowland well logs and greywackes from the Olympic Peninsula. Density/velocity relations are similar for the Washington coastal well logs and mafic rocks from the Olympic Peninsula, but differ from those of the Puget Lowland well logs and greywackes from the Olympic Peninsula.

Washington↗

Lithology of gravel deposits of the Front Range urban corridor, Colorado: data and multivariate statistical analysis

Pebble count data from Quaternary gravel deposits north of Denver, Colo., were analyzed by multivariate statistical methods to identify lithologic factors that might affect aggregate quality. The pebble count data used in this analysis were taken from the map by Colton and Fitch (1974) and are supplemented by data reported by the Front Range Infrastructure Resources Project. This report provides data tables and results of the statistical analysis. The multivariate statistical analysis used here consists of log-contrast principal components analysis (method of Reyment and Savazzi, 1999) followed by rotation of principal components and factor interpretation. Three lithologic factors that might affect aggregate quality were identified: 1) granite and gneiss versus pegmatite, 2) quartz + quartzite versus total volcanic rocks, and 3) total sedimentary rocks (mainly sandstone) versus granite. Factor 1 (grain size of igneous and metamorphic rocks) may represent destruction during weathering and transport or varying proportions of rocks in source areas. Factor 2 (resistant source rocks) represents the dispersion shadow of metaquartzite detritus, perhaps enhanced by resistance of quartz and quartzite during weathering and transport. Factor 3 (proximity to sandstone source) represents dilution of gravel by soft sedimentary rocks (mainly sandstone), which are exposed mainly in hogbacks near the mountain front. Factor 1 probably does not affect aggregate quality. Factor 2 would be expected to enhance aggregate quality as measured by the Los Angeles degradation test. Factor 3 may diminish aggregate quality.

Open-File Report↗

Geologic map and digital database of the Porcupine Wash 7.5 minute Quadrangle, Riverside County, southern California

This data set maps and describes the geology of the Porcupine Wash 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses parts of the Hexie Mountains, Cottonwood Mountains, northern Eagle Mountains, and south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle and Cottonwood Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle and Hexie Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults and an east-west trending system of high-angle dip- and left-slip faults. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Porcupine Wash database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a scanned topographic base at a scale of 1:24,000, and (5) attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

California↗

Geologic map and digital database of the Conejo Well 7.5 minute quadrangle, Riverside County, southern California

This data set maps and describes the geology of the Conejo Well 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses part of the northern Eagle Mountains and part of the south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults in the Eagle Mountains and an east-west trending system of high-angle dip- and left-slip faults. In and adjacent to the Conejo Well quadrangle, faults of the northwest-trending set displace Miocene sedimentary rocks and basalt deposited on the Tertiary erosion surface and Pliocene and (or) Pleistocene deposits that accumulated on the oldest pediment. Faults of this system appear to be overlain by Pleistocene deposits that accumulated on younger pediments. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Conejo Well database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a point coverage containing line ornamentation, and (5) a scanned topographic base at a scale of 1:24,000. The coverages include attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

California↗

Implications for the formation of the Hollywood Basin from gravity interpretations of the northern Los Angeles Basin, California

Gravity data provide insights on the complex tectonic history and structural development of the northern Los Angeles Basin region. The Hollywood basin appears to be a long (> 12 km), narrow (up to 2 km wide) trough lying between the Santa Monica Mountains and the Wilshire arch. In the deepest parts of the Hollywood basin, the modeled average thickness ranges from roughly 250 m if filled with only Quaternary sediments to approximately 600 m if Pliocene sediments are also present. Interpretations of conflicting drill hole data force us to consider both these scenarios. Because of the marked density contrast between the dense Santa Monica Mountains and the low-density sediments in the Los Angeles Basin, the gravity method is particularly useful in mapping the maximum displacement along the Santa Monica-Hollywood-Raymond fault zone. The gravity-defined Santa Monica–Hollywood fault zone deviates, in places, from the mapped active fault and fold scarps located with boreholes and trenching and by geomorphological mapping by Dolan and others (1997). Our models suggest that the Santa Monica–Hollywood fault zone dips northward approximately 63°. Three structural models are considered for the origin of the Hollywood basin: pull-apart basin, flexural basin, and a basin related to a back limb of a major fold. Although our preferred structural model involves flexure, the available geologic and geophysical data do not preclude contributions to the deepening of the basin from one or both of the other two models. Of particular interest is that the distribution of red-tagged buildings and structures damaged by the Northridge earthquake has a strong spatial correlation with the axis of the Hollywood basin defined by the gravity data. Several explanations for this correlation are explored, but two preferred geologic factors for the amplification of ground motion besides local site effects are (1) focussing of energy by a fault along the axis of the Hollywood basin and (2) focussing effects related to differential refraction of seismic rays across the basin.

California↗

Post-glacial inflation-deflation cycles, tilting, and faulting in the Yellowstone Caldera based on Yellowstone Lake shorelines

The Yellowstone caldera, like many other later Quaternary calderas of the world, exhibits dramatic unrest. Between 1923 and 1985, the center of the Yellowstone caldera rose nearly one meter along an axis between its two resurgent domes (Pelton and Smith, 1979, Dzurisin and Yamashita, 1987). From 1985 until 1995-6, it subsided at about two cm/yr (Dzurisin and others, 1990). More recent radar interferometry studies show renewed inflation of the northeastern resurgent dome between 1995 and 1996; this inflation migrated to the southwestern resurgent dome from 1996 to 1997 (Wicks and others, 1998). We extend this record back in time using dated geomorphic evidence of postglacial Yellowstone Lake shorelines around the northern shore, and Yellowstone River levels in the outlet area. We date these shorelines using carbon isotopic and archeological methods. Following Meyer and Locke (1986) and Locke and Meyer (1994), we identify the modern shoreline as S1 (1.9 ? 0.3 m above the lake gage datum), map paleoshoreline terraces S2 to S6, and infer that the prominent shorelines were cut during intracaldera uplift episodes that produced rising water levels. Doming along the caldera axis reduces the gradient of the Yellowstone River from Le Hardys Rapids to the Yellowstone Lake outlet and ultimately causes an increase in lake level. The 1923-1985 doming is part of a longer uplift episode that has reduced the Yellowstone River gradient to a ?pool? with a drop of only 0.25 m over most of this 5 km reach. We also present new evidence that doming has caused submergence of some Holocene lake and river levels. Shoreline S5 is about 14 m above datum and estimated to be ~12.6 ka, because it post-dates a large hydrothermal explosion deposit from the Mary Bay area (MB-II) that occurred ~13 ka. S4 formed about 8 m above datum ~10.7 ka as dated by archeology and 14C, and was accompanied by offset on the Fishing Bridge fault. About 9.7 ka, the Yellowstone River eroded the ?S-meander?, followed by a ~5 m rise in lake level to S2. The lowest generally recognizable shoreline is S2. It is ~5 m above datum (3 m above S1) and is ~8 ka, as dated on both sides of the outlet. Yellowstone Lake and the river near Fishing Bridge were 5-6 m below their present level about 3-4 ka, as indicated by 14C ages from submerged beach deposits, drowned valleys, and submerged Yellowstone River gravels. Thus, the lake in the outlet region has been below or near its present level for about half the time since a 1 km-thick icecap melted from the Yellowstone Lake basin about 16 ka. The amplitude of two rises in lake and river level can be estimated based on the altitude of Le Hardys Rapids, indicators of former lake and river levels, and reconstruction of the river gradient from the outlet to Le Hardys Rapids. Both between ~9.5 ka and ~8.5 ka, and after ~3 ka, Le Hardys Rapids (LHR) was uplifted about 8 meters above the outlet, suggesting a cyclic deformation process. Older possible rises in lake level are suggested by locations where the ~10.7 ka S4 truncates older shorelines, and valleys truncated by the ~12.6 ka S5 shoreline. Using these controls, a plot of lake level through time shows 5-7 millennial-scale oscillations since 14.5 ka. Major cycles of inflation and deflation are thousands of years long. Le Hardys Rapids has twice been uplifted ~8 m relative to the lake outlet. These two locations span only the central 25% of the historic caldera doming, so that if we use historic doming as a model, total projected uplift would be ~32 m. This ?heavy breathing? of the central part of the Yellowstone caldera may reflect a combination of several possible processes: magmatic inflation, tectonic stretching and deflation, and hydrothermal fluid sealing and inflation followed by cracking of the seal, pressure release, and deflation. Over the entire postglacial period, subsidence has balanced or slightly exceeded uplift as shown by older shorelines that descend towards the caldera axis. We

Open-File Report↗