USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93Linked to original sources
USGS2003

Geologic map and digital database of the Yucaipa 7.5’ quadrangle, San Bernardino and Riverside Counties, California

Introduction This geologic database of the Yucaipa 7.5' quadrangle was prepared by the Southern California Areal Mapping Project (SCAMP), a regional geologic-mapping project sponsored jointly by the U.S. Geological Survey and the California Geological Survey. The database was developed as a contribution to the National Cooperative Geologic Mapping Program's National Geologic Map Database, and is intended to provide a general geologic setting of the Yucaipa quadrangle. The database and map provide information about earth materials and geologic structures, including faults and folds that have developed in the quadrangle due to complexities in the San Andreas Fault system. The Yucaipa 7.5' quadrangle contains materials and structures that provide unique insight into the Mesozoic and Cenozoic geologic evolution of southern California. Stratigraphic and structural elements include: (1) strands of the San Andreas Fault that bound far-traveled terranes of crystalline and sedimentary rock; (2) Mesozoic crystalline rocks that form lower and upper plates of the regionwide Vincent-Orocopia Thrust system; and (3) late Tertiary and Quaternary sedimentary materials and geologic structures that formed during the last million years or so and that record complex geologic interactions within the San Andreas Fault system. These materials and the structures that deform them provide the geologic framework for investigations of geologic hazards and ground-water recharge and subsurface flow. Geologic information contained in the Yucaipa database is general-purpose data that is applicable to land-related investigations in the earth and biological sciences. The term "generalpurpose" means that all geologic-feature classes have minimal information content adequate to characterize their general geologic characteristics and to interpret their general geologic history. However, no single feature class has enough information to definitively characterize its properties and origin. For this reason the database cannot be used for site-specific geologic evaluations, although it can be used to plan and guide investigations at the site-specific level.

California↗
USGS2003

Station corrections for the Katmai Region Seismic Network

Most procedures for routinely locating earthquake hypocenters within a local network are constrained to using laterally homogeneous velocity models to represent the Earth's crustal velocity structure. As a result, earthquake location errors may arise due to actual lateral variations in the Earth's velocity structure. Station corrections can be used to compensate for heterogeneous velocity structure near individual stations (Douglas, 1967; Pujol, 1988). The HYPOELLIPSE program (Lahr, 1999) used by the Alaska Volcano Observatory (AVO) to locate earthquakes in Cook Inlet and the Aleutian Islands is a robust and efficient program that uses one-dimensional velocity models to determine hypocenters of local and regional earthquakes. This program does have the capability of utilizing station corrections within it's earthquake location proceedure. The velocity structures of Cook Inlet and Aleutian volcanoes very likely contain laterally varying heterogeneities. For this reason, the accuracy of earthquake locations in these areas will benefit from the determination and addition of station corrections. In this study, I determine corrections for each station in the Katmai region. The Katmai region is defined to lie between latitudes 57.5 degrees North and 59.00 degrees north and longitudes -154.00 and -156.00 (see Figure 1) and includes Mount Katmai, Novarupta, Mount Martin, Mount Mageik, Snowy Mountain, Mount Trident, and Mount Griggs volcanoes. Station corrections were determined using the computer program VELEST (Kissling, 1994). VELEST inverts arrival time data for one-dimensional velocity models and station corrections using a joint hypocenter determination technique. VELEST can also be used to locate single events.

Alaska↗
USGS2003

Sediment-hosted copper deposits of the world: Deposit models and database

Introduction This publication contains four descriptive models and four grade-tonnage models for sediment hosted copper deposits. Descriptive models are useful in exploration planning and resource assessment because they enable the user to identify deposits in the field and to identify areas on geologic and geophysical maps where deposits could occur. Grade and tonnage models are used in resource assessment to predict the likelihood of different combinations of grades and tonnages that could occur in undiscovered deposits in a specific area. They are also useful in exploration in deciding what deposit types meet the economic objectives of the exploration company. The models in this report supersede the sediment-hosted copper models in USGS Bulletin 1693 (Cox, 1986, and Mosier and others, 1986) and are subdivided into a general type and three subtypes. The general model is useful in classifying deposits whose features are obscured by metamorphism or are otherwise poorly described, and for assessing regions in which the geologic environments are poorly understood. The three subtypes are based on differences in deposit form and environments of deposition. These differences are described under subtypes in the general model. Deposit models are based on the descriptions of geologic environments and physical characteristics, and on metal grades and tonnages of many individual deposits. Data used in this study are presented in a database representing 785 deposits in nine continents. This database was derived partly from data published by Kirkham and others (1994) and from new information in recent publications. To facilitate the construction of grade and tonnage models, the information, presented by Kirkham in disaggregated form, was brought together to provide a single grade and a single tonnage for each deposit. Throughout the report individual deposits are defined as being more than 2,000 meters from the nearest adjacent deposit. The deposit models are presented here as a PDF file. The database can be most conveniently read in FileMaker Pro. For those who do not have the FileMaker application, Microsoft-Excel, tab-delimited-ASCII and comma-separated-value files are included. The reader may be interested in a similar publication on porphyry copper deposits (Singer and others, 2005) also available online. The Google Earth image is not intended to be viewed at the highest possible magnification because the resolution of the database is plus or minus two kilometers. At extreme zoom settings, the deposit locations may not coincide with the Google-Earth images of the mine workings.

Open-File Report↗
USGS2004

Surficial materials in the conterminous United States

Introduction: The Earth's bedrock is overlain in many places by a loosely compacted and mostly unconsolidated blanket of sediments in which soils commonly are developed. These sediments generally were eroded from underlying rock, and then were transported and deposited. In places, they exceed 1,000 ft (330 m) in thickness. Where the sediment blanket is absent, bedrock is either exposed or has been weathered to produce a residual soil. This map shows the sediments and the weathered, residual material; for ease of discussion, these are referred to here as 'surficial materials.' Certain areas on this map include a significant number of rock outcrops, which cannot be shown at the scale of the map; this is noted in the 'Description of Map Units' section. Most daily human activities occur on or near the Earth's surface. Homeowners, communities, and governments can make improved decisions about hazard, resource, and environmental issues, when they understand the nature of surficial materials and how they vary from place to place. For example, are the surficial materials upon which a home is built stable enough to resist subsidence or lateral movement during an earthquake? Do these materials support a ground water resource adequate for new homes? Can they adequately filter contaminants and protect buried aquifers both in underlying sediments and in bedrock? Are they suitable for development of a new wetland? Where can we find materials suitable for aggregate? The USGS National Cooperative Geologic Mapping Program (NCGMP) works with the State geological surveys to identify priority areas for mapping of surficial materials (for example, in areas of complex and poorly understood deposits of various sediment types, where metropolitan areas are experiencing rapid growth). To help establish these priorities, a modern, synoptic overview of the geology is needed. This map represents an overview of our current knowledge of the composition and distribution of surficial materials in the conterminous United States. (The map covers only the conterminous U.S. because similar geologic information in digital form was not readily available for Alaska and Hawaii.) The best available map has been a highly generalized depiction at 1:7,500,000-scale (about 120 miles to the inch), prepared for the USGS National Atlas (Hunt, 1979; 1986). This map is compiled at a slightly more detailed scale (about 80 miles to the inch) than Hunt (1979; 1986). We used digital methods, which enabled us to rapidly incorporate the variety of source maps available to us. State-scale geologic maps from the western United States were brought directly into this map, without expending the time needed to resolve interpretive differences among them. Therefore, abrupt changes in surficial materials are indicated along many State boundaries. This of course is an artifact of our compilation technique, and a limitation on its utility. However, this approach supports the basic premise of the map -- to provide an overview of surficial materials, and to identify areas where additional work may be needed in order to resolve scientific issues that can, in turn, lead to improved mapping.

Open-File Report↗
USGS2004

The Cottage Lake aeromagnetic lineament: A possible onshore extension of the southern Whidbey Island fault, Washington

The northwest-striking southern Whidbey Island fault zone (SWIF) was mapped previously using borehole data and potential-field anomalies on Whidbey Island and marine seismic surveys beneath surrounding waterways. Abrupt subsidence at a coastal marsh on south-central Whidbey Island suggests that the SWIF experienced a MW 6.5 to 7.0 earthquake about 3000 years ago. Southeast of Whidbey Island, a hypothesized southeastward projection of the SWIF would make landfall between the cities of Seattle and Everett. As part of systematic, ongoing studies by the U.S. Geological Survey, University of Washington, and other earth science organizations to evaluate potentially active faults and other earth hazards throughout the Puget Lowland, we test this hypothesis using aeromagnetic, lidar, and borehole data. Linear, northwest-striking magnetic anomalies traversing the mainland region project southeastward toward the communities of Woodinville and Maltby, Washington. All of these magnetic anomalies are low in amplitude and best illuminated in residual magnetic fields. The most prominent of the residual magnetic anomalies extends at least 16 km, lies approximately on strike with the SWIF on Whidbey Island, and passes near Crystal and Cottage Lakes, about 27 km southeast of downtown Everett. In places, this magnetic anomaly is associated with topographic lineaments, but spectral analysis indicates that the source of the anomaly extends to depths greater than 2 km and cannot be explained entirely by topographic effects. The Alderwood #1 oil exploration well located on strike with the Cottage Lake aeromagnetic lineament shows evidence of deformation over a total depth range of 3000 m; some beds within this interval exhibit intense fracturing and shearing, although deformation within the well can only be constrained as post-early Oligocene and pre-Pleistocene. Boreholes acquired as part of a wastewater tunnel project show evidence of soil disturbance at locations where some topographic and aeromagnetic lineaments cross the tunnel alignment. Some of the disturbance is likely tectonic in origin, although other explanations are possible. Some of the soil disturbance demonstrably predates the 15-13 ka Fraser glaciation of the Puget Lowland; other samples have inconclusive ages and may be younger. Subtle scarps in Pleistocene surfaces are visible on high-resolution lidar topography at a number of locations along the Cottage Lake aeromagnetic lineament. Collectively, the scarps are parallel to the trend of the aeromagnetic lineament and extend a total distance of 18 km. In the field, scarps exhibit 1 to 5 m of north-side-up offset. The scarps provide targets for future paleoseismic trenching studies to test the hypothesis that they have a tectonic origin.

Washington↗
USGS2004

NADM Conceptual Model 1.0 -- A Conceptual Model for Geologic Map Information

Executive Summary -- The NADM Data Model Design Team was established in 1999 by the North American Geologic Map Data Model Steering Committee (NADMSC) with the purpose of drafting a geologic map data model for consideration as a standard for developing interoperable geologic map-centered databases by state, provincial, and federal geological surveys. The model is designed to be a technology-neutral conceptual model that can form the basis for a web-based interchange format using evolving information technology (e.g., XML, RDF, OWL), and guide implementation of geoscience databases in a common conceptual framework. The intended purpose is to allow geologic information sharing between geologic map data providers and users, independent of local information system implementation. The model emphasizes geoscience concepts and relationships related to information presented on geologic maps. Design has been guided by an informal requirements analysis, documentation of existing databases, technology developments, and other standardization efforts in the geoscience and computer-science communities. A key aspect of the model is the notion that representation of the conceptual framework (ontology) that underlies geologic map data must be part of the model, because this framework changes with time and understanding, and varies between information providers. The top level of the model distinguishes geologic concepts, geologic representation concepts, and metadata. The geologic representation part of the model provides a framework for representing the ontology that underlies geologic map data through a controlled vocabulary, and for establishing the relationships between this vocabulary and a geologic map visualization or portrayal. Top-level geologic classes in the model are Earth material (substance), geologic unit (parts of the Earth), geologic age, geologic structure, fossil, geologic process, geologic relation, and geologic event.

Open-File Report↗
USGS2005

Preliminary geologic map of the Los Angeles 30' x 60' quadrangle, Southern California

This data set maps and describes the geology of the Los Angeles 30? x 60? quadrangle, southern California. Compilation of the Los Angeles quadrangle is based upon published mapping at scales of 1:12,000 and smaller, unpublished mapping at scales of 1:12,000 and smaller, with reconnaissance mapping by the compilers to resolve some edge-matching problems. The Los Angeles 30' x 60' quadrangle covers approximately 5,000 km2 including some of the most densely populated urban and suburban areas of the southern California megalopolis. It extends about 90 km E-W and about 55 km N-S, from Fillmore and Thousand Oaks in the west to Vincent in the northeast and Montebello in the southeast, and includes urban San Gabriel Valley and San Gabriel Mountain foothill communities from Monrovia to Pasadena, as well as Glendale, downtown Los Angeles, Hollywood, Santa Monica, Malibu, in addition to all the communities in the San Fernando Valley, Simi Valley, and the upper Santa Clara River Valley. From the 2000 Census, the population of these urban and suburban areas totals approximately 5.6 million, and estimates of property value total hundreds of billions of dollars. Residents and transient visitors are subject to potential hazards from earthquakes, debris flows and other landslides, floods, wildfires, subsidence from ground water and petroleum withdrawal, and swelling soils; and coastal areas are exposed to flooding and erosion by storm and tsunami waves. Topographic relief ranges from about one hundred meters sub sea (in Santa Monica Bay) to more than 2,000 meters above sea level at Pacifico Mountain in the high San Gabriel Mountains. In addition to the populated area, the quadrangle includes significant areas of wilderness in the Angeles and Los Padres National Forests, in the Santa Monica Mountains National Recreation Area, and the Sespe Condor Sanctuary. The geologic map illustrates the general distribution of the rocks and surficial deposits in the area and their structural and stratigraphic relations to one another. The principal characteristics of the map units are described and are part of the database. The map provides a regional geologic framework as an aid to better evaluations of the potential for hazard from active earth processes. It synthesizes and combines studies by many earth scientists. Most of the source maps are at more detailed scales than 1:100,000, and we utilized the most detailed source materials available. We have not attempted to resolve all problems of stratigraphic correlation and nomenclature. In most areas we have retained the unit designations of source-map authors, but in some areas, particularly in the igneous-metamorphic complex of the San Gabriel Mountains, some unit designations have been changed. Hopefully, this map will stimulate further work to describe and correlate the many units within the scope of a more coherent, more accurate geologic history.

California↗
USGS2006

Two-dimensional magnetotelluric model of deep resistivity structure in the Bodie-Aurora district of California

Introduction: Magnetotelluric data were acquired during October 2001 by the U.S. Geological Survey (USGS) as part of a study to examine the structural nature of basins in the transition zone between the Sierra Nevada Mountains of California and the Basin and Range province of Nevada. Magnetotelluric (MT) geophysical studies assist the mapping of geologic structure and the inference of lithologic packages that are concealed beneath the Earth's surface. The Basin and Range province has a complicated geologic history, which includes extension and compression of the Earth's crust to form the basins and ranges that blanket much of Nevada. The basins and ranges in the vicinity of this study trend northeastward and are bounded by steeply dipping strike slip faults. Interestingly, deep east-west magnetic trends occur in the aeromagnetic data of this study area indicating that the northeast-trending basins and ranges represent only thin-skinned deformation at the surface with an underlying east-west structure. To investigate this issue, MT data were acquired at seven stations in eastern California, 20 km east of Mono Lake. The purpose of this report is to present a two-dimensional apparent resistivity model of the MT data acquired for this study.

Open-File Report↗
USGS2007

U.S. Geological Survey Scientific Activities in the Exploration of Antarctica: Introduction to Antarctica (Including USGS Field Personnel: 1946-59)

INTRODUCTION Antarctica is the planet's fifth largest continent [13.2 million km2 (5.1 million mi2)]; it contains the Earth's largest (of two) remaining ice sheets; it is considered to be one of the most important scientific laboratories on Earth. This report is the introduction to a series that covers 60 years of U.S. Geological Survey (USGS) scientific activity in Antarctica. It will concentrate primarily on three major topics: 1) a brief chronological record of the historical search, discovery, and exploration of the southern continent by humans; 2) early USGS scientific activities in Antarctica, listing expeditions, projects, people and resulting professional publications for Operation Highjump, 1946-47; Operation Windmill, 1947-48; USS Atka Reconnaissance Cruise, 1954-55; and Operation Deep Freeze I, II, III, and IV, 1955-59, including IGY; 3) significant changes that have occurred in Antarctic exploration and research since World War II will be discussed at the end of this report. Subsequent Open-File Reports will provide a year-by-year documentation of USGS scientific activities and accomplishments in Antarctica beginning with the post-IGY, 1959-60 research team. One Open-File Report is planned to be written for each field-based season. For an example of the series format, see Open-File Reports 2006-1113 (Meunier, 2007a) and 2006-1114 (Meunier, 2007b). This report is a companion document to Open-File Report 2006-1116 (Meunier, 2007c). The USGS mapping and science programs in Antarctica are among the longest continuously funded projects in the United States Antarctic Program (USAP). The 2005-06 field season is the 56th consecutive U.S. expedition in which USGS scientists have been participants, starting in 1946. USGS and the National Science Foundation (NSF) cooperation began with the establishment by NSF of the U.S. Antarctic (Research) Program [USA(R)P] in 1958-59 under Operation Deep Freeze IV (DF IV) and was given the responsibility for the principal coordination and management of all U.S. scientific activities in Antarctica in Deep Freeze 60 (DF 60) (1959-60). Financial support from NSF, mostly in the form of Memorandum of Understandings (MOUs) and Cooperative Agreements, extends back to this period and can be attributed to the need for accurate geologic, geophysical, and topographic base maps of specific field areas or regions where NSF-funded science projects were planned. The epoch of Antarctic exploration during the IGY was driven by science and, in a spirit of peaceful cooperation, the international scientific community wanted to limit military activities on the continent to logistical support (Meunier, 1979 [2007], p. 38). The USGS, a Federal civilian science agency in the Department of the Interior, has, since its founding in 1879, carried out numerous field-based national (and some international) programs in biology, geology, geophysics, hydrology, and mapping. Therefore, the USGS was the obvious choice for these tasks, because it already had a professional staff of experienced mapmakers, scientists, and program managers with the foresight, dedication, and understanding of the need for accurate maps to support the science programs in Antarctica when asked to do so by the U.S. National Academy of Sciences. Public Laws 85-743 and 87-626, signed in August 1958, and in September 1962, respectively, authorized the Secretary, U.S. Department of the Interior, through the USGS, to support mapping and scientific work in Antarctica (Meunier, 1979 [2007], appendix A). Open-File Report 2006-1116 includes scanned facsimiles of postal cachets. It has become an international practice to create postal cachets to commemorate special events and projects in Antarctica. A cachet is defined as a seal or commemorative design printed or stamped on an envelope to mark a philatelic or special event. The inked impression illustrates to the scientist, historian, stamp collector, and general public the multidisciplinary science projects staffed by USGS and collaborating scientists during the field season. Since 1960, philatelic cachets have been created by team members for each USGS field season and, in most cases, these cachets depict the specific geographic areas and field season program objectives. The cachets become a convenient documentation of the people, projects, and geographic places of interest for that year. Because the cachets are representative of USGS activities, each year's cachet is included as a digital facsimile in that year's Open-File Report. In the 1980s, multiple USGS cachets were prepared each year, one for use by the winter team at Amundsen-Scott South Pole Station and the other for the project work areas of the austral summer field season programs.

Open-File Report↗
USGS2006

National Geomagnetism Program: Current Status & Five-Year Plan, 2006-2010

Executive Summary: The U.S. Geological Survey's Geomagnetism Program serves the scientific community and the broader public by collecting and distributing magnetometer data from an array of ground-based observatories and by conducting scientific analysis on those data. Preliminary, variational time-series can be collected and distributed in near-real time, while fully calibrated, absolute time-series are distributed after processing. The data are used by the civilian and military parts of the Federal Government, by private industry, and by academia, for a wide variety of purposes of both immediately practical importance and long-term scientific interest, including space-weather diagnosis and related hazard mitigation, mapping of the magnetic field and measurement of its activity, and research on the nature of the Earth's interior and the near-Earth space environment. This document reviews the current status of the Program, in terms of its situation within the Government and within the scientific community; summarizes the Program's operations, its staffing situation, and its facilities; describes the diversity of uses of Program magnetometer data; and presents a plan for the next 5 years for enhancing the Program's data-based services, developing products, and conducting scientific research.

Open-File Report↗
USGS2007

SCIAMACHY’s View of the Polar Atmosphere

The instrument SCIAMACHY onboard the European ENVISAT mission provides unique capabilities for deriving atmospheric geophysical parameters. Since its launch in early 2002 it has operated successfully in orbit. Due to ENVISAT’s high inclination orbit the polar regions are monitored continuously. We report here results about the status of the polar atmosphere in the past 5 years with special emphasis on the southern hemisphere. This part of the atmosphere is considered to be highly sensitive to anthropogenic impacts on the Earth system and thus to climate change. The acquired data permit retrieving information on the Earth’s atmosphere from troposphere up to the mesosphere

Open-File Report↗
USGS2009

U.S. Geological Survey Global Seismographic Network - Five-Year Plan 2006-2010

The Global Seismographic Network provides data for earthquake alerting, tsunami warning, nuclear treaty verification, and Earth science research. The system consists of nearly 150 permanent digital stations, distributed across the globe, connected by a modern telecommunications network. It serves as a multi-use scientific facility and societal resource for monitoring, research, and education, by providing nearly uniform, worldwide monitoring of the Earth. The network was developed and is operated through a partnership among the National Science Foundation (http://www.nsf.gov), the Incorporated Research Institutions for Seismology (http://www.iris.edu/hq/programs/gsn), and the U.S. Geological Survey (http://earthquake.usgs.gov/gsn).

Open-File Report↗
USGS2009

Experimental Advanced Airborne Research Lidar (EAARL) Data Processing Manual

The Experimental Advanced Airborne Research Lidar (EAARL) is an example of a Light Detection and Ranging (Lidar) system that utilizes a blue-green wavelength (532 nanometers) to determine the distance to an object. The distance is determined by recording the travel time of a transmitted pulse at the speed of light (fig. 1). This system uses raster laser scanning with full-waveform (multi-peak) resolving capabilities to measure submerged topography and adjacent coastal land elevations simultaneously (Nayegandhi and others, 2009). This document reviews procedures for the post-processing of EAARL data using the custom-built Airborne Lidar Processing System (ALPS). ALPS software was developed in an open-source programming environment operated on a Linux platform. It has the ability to combine the laser return backscatter digitized at 1-nanosecond intervals with aircraft positioning information. This solution enables the exploration and processing of the EAARL data in an interactive or batch mode. ALPS also includes modules for the creation of bare earth, canopy-top, and submerged topography Digital Elevation Models (DEMs). The EAARL system uses an Earth-centered coordinate and reference system that removes the necessity to reference submerged topography data relative to water level or tide gages (Nayegandhi and others, 2006). The EAARL system can be mounted in an array of small twin-engine aircraft that operate at 300 meters above ground level (AGL) at a speed of 60 meters per second (117 knots). While other systems strive to maximize operational depth limits, EAARL has a narrow transmit beam and receiver field of view (1.5 to 2 milliradians), which improves the depth-measurement accuracy in shallow, clear water but limits the maximum depth to about 1.5 Secchi disk depth (~20 meters) in clear water. The laser transmitter [Continuum EPO-5000 yttrium aluminum garnet (YAG)] produces up to 5,000 short-duration (1.2 nanosecond), low-power (70 microjoules) pulses each second. Each pulse is focused into an illumination area that has a radius of about 20 centimeters on the ground. The pulse-repetition frequency of the EAARL transmitter varies along each across-track scan to produce equal cross-track sample spacing and near uniform density (Nayegandhi and others, 2006). Targets can have varying physical and optical characteristics that cause extreme fluctuations in laser backscatter complexity and signal strength. To accommodate this dynamic range, EAARL has the real-time ability to detect, capture, and automatically adapt to each laser return backscatter. The backscattered energy is collected by an array of four high-speed waveform digitizers connected to an array of four sub-nanosecond photodetectors. Each of the four photodetectors receives a finite range of the returning laser backscatter photons. The most sensitive channel receives 90% of the photons, the least sensitive receives 0.9%, and the middle channel receives 9% (Wright and Brock, 2002). The fourth channel is available for detection but is not currently being utilized. All four channels are digitized simultaneously into 65,536 samples for every laser pulse. Receiver optics consists of a 15-centimeter-diameter dielectric-coated Newtonian telescope, a computer-driven raster scanning mirror oscillating at 12.5 hertz (25 rasters per second), and an array of sub-nanosecond photodetectors. The signal emitted by the pulsed laser transmitter is amplified as backscatter by the optical telescope receiver. The photomultiplier tube (PMT) then converts the optical energy into electrical impulses (Nayegandhi and others, 2006). In addition to the full-waveform resolving laser, the EAARL sensor suite includes a down-looking 70-centimeter-resolution Red-Green-Blue (RGB) digital network camera, a high-resolution color infrared (CIR) multispectral camera (14-centimeter-resolution), two precision dual-frequency kinematic carrier-phase global positioning system (GPS) receivers, and an

Open-File Report↗
USGS2009

Carbonatites of the world, explored deposits of Nb and REE— Database and grade and tonnage models

This report is based on published tonnage and grade data on 58 Nb- and rare-earth-element (REE)-bearing carbonatite deposits that are mostly well explored and are partially mined or contain resources of these elements. The deposits represent only a part of the known 527 carbonatites around the world, but they are characterized by reliable quantitative data on ore tonnages and grades of niobium and REE. Grade and tonnage models are an important component of mineral resource assessments. Carbonatites present one of the main natural sources of niobium and rare-earth elements, the economic importance of which grows consistently. A purpose of this report is to update earlier publications. New information about known deposits, as well as data on new deposits published during the last decade, are incorporated in the present paper. The compiled database (appendix 1; linked to right) contains 60 explored Nb- and REE-bearing carbonatite deposits - resources of 55 of these deposits are taken from publications. In the present updated grade-tonnage model we have added 24 deposits comparing with the previous model of Singer (1998). Resources of most deposits are residuum ores in the upper part of carbonatite bodies. Mineral-deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types vary significantly, and (2) deposits of different types are present in distinct geologic settings that can be identified from geologic maps. Mineral-deposit models combine the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Globally based deposit models allow recognition of important features and demonstrate how common different features are. Well-designed deposit models allow geologists to deduce possible mineral-deposit types in a given geologic environment, and the grade and tonnage models allow economists to estimate the possible economic viability of these resources. Thus, mineral-deposit models play a central role in presenting geoscience information in a useful form to policy makers. The foundation of mineral-deposit models is information about known deposits. This publication presents the latest geologic information and newly developed grade and tonnage models for Nb- and REE-carbonatite deposits in digital form. The publication contains computer files with information on deposits from around the world. It also contains a text file allowing locations of all deposits to be plotted in geographic information system (GIS) programs. The data are presented in FileMaker Pro as well as in .xls and text files to make the information available to a broadly based audience. The value of this information and any derived analyses depends critically on the consistent manner of data gathering. For this reason, we first discuss the rules used in this compilation. Next, the fields of the database are explained. Finally, we provide new grade and tonnage models and analysis of the information in the file.

Open-File Report↗
USGS2010

Chemistry of selected core samples, concentrate, tailings, and tailings pond waters: Pea Ridge iron (-lanthanide-gold) deposit, Washington County, Missouri

The Minerals at Risk and for Emerging Technologies Project of the U.S. Geological Survey (USGS) Mineral Resources Program is examining potential sources of lanthanide elements (rare earth elements) as part of its objective to provide up-to-date geologic information regarding mineral commodities likely to have increased demand in the near term. As part of the examination effort, a short visit was made to the Pea Ridge iron (-lanthanide-gold) deposit, Washington County, Missouri in October 2008. The deposit, currently owned by Wings Enterprises, Inc. of St. Louis, Missouri (Wings), contains concentrations of lanthanides that may be economic as a primary product or as a byproduct of iron ore production. This report tabulates the results of chemical analyses of the Pea Ridge samples and compares rare earth elements contents for world class lanthanide deposits with those of the Pea Ridge deposit. The data presented for the Pea Ridge deposit are preliminary and include some company data that have not been verified by the USGS or by the Missouri Department of Natural Resources, Division of Geology and Land Survey (DGLS), Geological Survey Program (MGS). The inclusion of company data is for comparative purposes only and does not imply an endorsement by either the USGS or MGS.

Missouri↗
USGS2011

Partnership of Environmental Education and Research-A compilation of student research, 1999-2008

The U.S. Geological Survey (USGS) Tennessee Water Science Center and the College of Engineering and Technology at Tennessee State University developed a Partnership in Environmental Education and Research (PEER) to support environmental research at TSU and to expand the environmental research capabilities of the USGS in Tennessee. The PEER program is driven by the research needs to better define the occurrence, fate, and transport of contaminants in groundwater and surface water. Research in the PEER program has primarily focused on the transport and remediation of organic contamination in karst settings. Research conducted through the program has also expanded to a variety of media and settings. Research areas include contaminant occurrence and transport, natural and enhanced bioremediation, geochemical conditions in karst aquifers, mathematical modeling for contaminant transport and degradation, new methods to evaluate groundwater contamination, the resuspension of bacteria from sediment in streams, the use of bioluminescence and chemiluminescence to identify the presence of contaminants, and contaminant remediation in wetlands. The PEER program has increased research and education opportunities for students in the College of Engineering, Technology, and Computer Science and has provided students with experience in presenting the results of their research. Students in the program have participated in state, regional, national and international conferences with more than 140 presentations since 1998 and more than 40 student awards. The PEER program also supports TSU outreach activities and efforts to increase minority participation in environmental and earth science programs at the undergraduate and graduate levels. TSU students and USGS staff participate in the TSU summer programs for elementary and high school students to promote earth sciences. The 2007 summer camps included more than 130 students from 20 different States and Washington DC.

Tennessee↗
USGS2011

Isostatic gravity map of the Point Sur 30' x 60' quadrangle and adjacent areas, California

This isostatic residual gravity map is part of a regional effort to investigate the tectonics and water resources of the central Coast Range. This map serves as a basis for modeling the shape of basins and for determining the location and geometry of faults in the area. Local spatial variations in the Earth's gravity field (after removing variations caused by instrument drift, earth-tides, latitude, elevation, terrain, and deep crustal structure), as expressed by the isostatic anomaly, reflect the distribution of densities in the mid- to upper crust, which in turn can be related to rock type. Steep gradients in the isostatic gravity field often indicate lithologic or structural boundaries. Gravity highs reflect the Mesozoic granitic and Franciscan Complex basement rocks that comprise both the northwest-trending Santa Lucia and Gabilan Ranges, whereas gravity lows in Salinas Valley and the offshore basins reflect the thick accumulations of low-density alluvial and marine sediment. Gravity lows also occur where there are thick deposits of low-density Monterey Formation in the hills southeast of Arroyo Seco (>2 km, Marion, 1986). Within the map area, isostatic residual gravity values range from approximately -60 mGal offshore in the northern part of the Sur basin to approximately 22 mGal in the Santa Lucia Range.

California↗
USGS2011

Global multi-resolution terrain elevation data 2010 (GMTED2010)

In 1996, the U.S. Geological Survey (USGS) developed a global topographic elevation model designated as GTOPO30 at a horizontal resolution of 30 arc-seconds for the entire Earth. Because no single source of topographic information covered the entire land surface, GTOPO30 was derived from eight raster and vector sources that included a substantial amount of U.S. Defense Mapping Agency data. The quality of the elevation data in GTOPO30 varies widely; there are no spatially-referenced metadata, and the major topographic features such as ridgelines and valleys are not well represented. Despite its coarse resolution and limited attributes, GTOPO30 has been widely used for a variety of hydrological, climatological, and geomorphological applications as well as military applications, where a regional, continental, or global scale topographic model is required. These applications have ranged from delineating drainage networks and watersheds to using digital elevation data for the extraction of topographic structure and three-dimensional (3D) visualization exercises (Jenson and Domingue, 1988; Verdin and Greenlee, 1996; Lehner and others, 2008). Many of the fundamental geophysical processes active at the Earth's surface are controlled or strongly influenced by topography, thus the critical need for high-quality terrain data (Gesch, 1994). U.S. Department of Defense requirements for mission planning, geographic registration of remotely sensed imagery, terrain visualization, and map production are similarly dependent on global topographic data. Since the time GTOPO30 was completed, the availability of higher-quality elevation data over large geographic areas has improved markedly. New data sources include global Digital Terrain Elevation Data (DTEDRegistered) from the Shuttle Radar Topography Mission (SRTM), Canadian elevation data, and data from the Ice, Cloud, and land Elevation Satellite (ICESat). Given the widespread use of GTOPO30 and the equivalent 30-arc-second DTEDRegistered level 0, the USGS and the National Geospatial-Intelligence Agency (NGA) have collaborated to produce an enhanced replacement for GTOPO30, the Global Land One-km Base Elevation (GLOBE) model and other comparable 30-arc-second-resolution global models, using the best available data. The new model is called the Global Multi-resolution Terrain Elevation Data 2010, or GMTED2010 for short. This suite of products at three different resolutions (approximately 1,000, 500, and 250 meters) is designed to support many applications directly by providing users with generic products (for example, maximum, minimum, and median elevations) that have been derived directly from the raw input data that would not be available to the general user or would be very costly and time-consuming to produce for individual applications. The source of all the elevation data is captured in metadata for reference purposes. It is also hoped that as better data become available in the future, the GMTED2010 model will be updated.

Open-File Report↗