USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Earth Observer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92Linked to original sources

Petrography and geochemistry of selected lignite beds in the Gibbons Creek mine (Manning Formation, Jackson Group, Paleocene) of east-central Texas

This study examined the petrographic and geochemical characteristics of two lignite beds (3500 and 4500 beds, Manning Formation, Jackson Group, Eocene) that are mined at the Gibbons Creek mine in east-central Texas. The purpose of the study was to identify the relations among sample ash yield, coal petrography, and trace-element concentrations in lignite and adjoining rock layers of the Gibbons Creek mine. Particular interest was given to the distribution of 12 environmentally sensitive trace elements (As, Be, Cd, Cr, Co, Hg, Mn, Ni, Pb, Sb, Se, and U) that have been identified as potentially hazardous air pollutants (HAPs) in the United States Clean Air Act Amendments of 1990. Eleven lignite, floor, and rock parting samples were collected from incremental channel samples of the 3500 and 4500 beds that were exposed in a highwall of pit A3 at the Gibbons Creek mine. Short proximate and ultimate and forms of sulfur analyses were performed on all lignite samples, and lignite and rock samples were analyzed for 60 major, minor and trace elements. Representative splits of all lignite samples were ground and cast into pellets, and polished for petrographic analyses in blue-light fluorescence and reflected white light to determine liptinite, inertinite, and huminite maceral group percentages. The following observations summarize our results and conclusions about the geochemistry, petrography, and sedimentology of the 3500 and 4500 beds of the Gibbons Creek lignite deposit: (1) Weighted average dry (db) ash yield for the two beds is 29.7%, average total sulfur content is 2.6%, and average calorific value is 7832 Btu (18.22 MJ/kg). Ash yields are greatest in the lower bench (59.33% db) of the 3500 bed and in the upper bench of the 4500 bed (74.61% db). (2) For lignite samples (on a whole-coal basis), the distributions of two of the HAPs (Pb and Sb) are positively related to ash yield, probably indicating an inorganic affinity for these elements. By using cluster analysis we found that Be and Cd were poorly associated with ash yield, indicating a possible organic affinity, and that Ni, Se, Hg, U, and Pb cluster with most of the rare-earth elements. (3) The dominance of the crypto-eugelinite maceral subgroup over the crypto-humotelinite subgroup suggests that all Gibbons Creek lignites were subjected to peat-forming conditions (either biogenic or chemical) conducive to the degradation of wood cellular material into matrix gels, or that original plant material was not very woody and was prone to formation of matrix gels. The latter idea is supported by pollen studies of Gibbons Creek lignite beds; results indicate that the peat was derived in part from marsh plants low in wood tissue. (4) The occurrence of siliceous sponge spicules in the lower benches of the 3500 bed suggests the original peat in this part of the bed was deposited in standing, fresh water. (5) The petrographic data indicate that the upper sample interval of the 3500 bed contains more inertinite (3%) than the other samples studied. Increases in inertinite content in the upper part of the 3500 bed may have been associated with alteration of the peat by acids derived from the volcanic ash or could have been caused by fire, oxidation and drying, or biologic alteration of the peat in the paleo-mire.

International Journal of Coal Geology↗

Full-range, solar-reflected hyperspectral microscopy to support earth remote sensing research

Over the past 20 years, hyperspectral microscopy has grown into a robust field of analysis for a number of applications. The visible to near-infrared (VNIR; 400 to 1000 nm) region of the spectrum has demonstrated utility for the characterization of healthy and diseased tissue and of biomolecular indicators at the cellular level. Here, we describe the development of a hyperspectral imaging (HSI) microscope that is aimed at material characterization to complement traditional stand-off, earth remote sensing with hyperspectral sensors. We combine commercial off the shelf technology to build an HSI microscope to collect spectral data with illumination provided by a tunable laser. Hyperspectral imaging microscopy (HIM) facilitates detailed examination of target materials at the subcentimeter spatial scale. The custom-built, laser illumination HSI microscope covers the NIR to shortwave infrared (NIR/SWIR; 900 to 2500 nm) solar-reflected spectral range. It is combined with a separate VNIR sensor (400 to 900 nm) that utilizes quartz–tungsten–halogen lamps for illumination. The combined sensors provide a means to collect <10,000 s of spectra in the full VNIR/SWIR spectral range from both pure substances and precisely engineered linear and nonlinear mixtures. The large abundance of spectra allows for a more detailed understanding of the variability and multivariate probability distributions of spectral signatures. This additional information aids in understanding the variability observed in ground truth spectra collected from portable spectrometers, and it greatly enhances sample description and metadata content. In addition, HIM data cubes can serve as proxies, as “microscenes,” for systems engineering applications such as trade studies for HSI acquired by air- and space-borne sensors.

Journal of Applied Remote Sensing↗

Analog field-scale acoustic study of volcanic eruption directivity using a tiltable liquid nitrogen-charged water cannon

Laterally directed explosive eruptions are responsible for multiple fatalities over the past decade and are an increasingly important volcanology problem. To understand the energy dynamics for these events, we collected field-scale explosion data from nine acoustic sensors surrounding a tiltable cannon as part of an exploratory experimental design. For each cannon discharge, the blast direction was varied systematically at 0°, 12°, and 24° from vertical, capturing acoustic wavefield directivity related to the tilt angle. While each event was similar in energy discharge potential, the resulting acoustic signal features were variable event-to-event, producing non-repetitious waveforms and spectra. Systematic features were observed in a subset of individual events for vertical and lateral discharges. For vertical discharges, the acoustic energy had a uniform radiation pattern. The lateral discharges showed an asymmetric radiation pattern with higher frequencies in the direction of the blast and depletion of those frequencies behind the cannon. Results suggest that, in natural volcanic systems, near-field blast directionality may be elucidated from acoustic sensors in absence of visual data, with implications for volcano monitoring and hazard assessment.

Earth, Planets and Space↗

Space-based imaging radar studies of U.S. volcanoes

The arrival of space-based imaging radar as a revolutionary land-surface mapping and monitoring tool little more than a quarter century ago enabled a spate of innovative volcano research worldwide. Soon after launch of European Space Agency’s ERS-1 spacecraft in 1991, the U.S. Geological Survey began SAR and InSAR studies of volcanoes in the Aleutian and Cascades arcs, in Hawai’i, and elsewhere in the western U.S. including the Yellowstone and Long Valley calderas. This paper summarizes results of that effort and presents new findings concerning: (1) prevalence of volcano deformation in the Aleutian and Cascade arcs; (2) surface-change detection and hazard assessment during eruptions at Aleutian and Hawaiian volcanoes; (3) geodetic imaging of magma storage and transport systems in Hawai’i; and (4) deformation sources and processes at the Yellowstone and Long Valley calderas. Surface deformation caused by a variety of processes is common in arc settings and could easily escape detection without systematic InSAR surveillance. Space-based SAR imaging of active lava flows and domes in remote or heavily vegetated settings, including during periods of bad weather and darkness, extends land-based monitoring capabilities and improves hazards assessments. At Kīlauea Volcano, comprehensive SAR and InSAR observations identify multiple magma storage zones beneath the summit area and along the East Rift Zone, and illuminate magma transport pathways. The same approach at Yellowstone tracks the ascent of magmatic volatiles from a mid-crustal intrusion to shallow depth and relates that process to increased hydrothermal activity at the surface. Together with recent and planned launches of highly capable imaging-radar satellites, these findings support an optimistic outlook for near-real time surveillance of volcanoes at global scale in the coming decade.

Frontiers in Earth Science↗

The deep structure of a sea-floor hydrothermal deposit

Hydrothermal circulation at the crests of mid-ocean ridges plays an important role in transferring heat from the interior of the Earth. A consequence of this hydrothermal circulation is the formation of metallic ore bodies known as volcanic-associated massive sulphide deposits. Such deposits, preserved on land, were important sources of copper for ancient civilizations and continue to provide a significant source of base metals (for example, copper and zinc). Here we present results from Ocean Drilling Program Leg 169, which drilled through a massive sulphide deposit on the northern Juan de Fuca spreading centre and penetrated the hydrothermal feeder zone through which the metal-rich fluids reached the sea floor. We found that the style of feeder-zone mineralization changes with depth in response to changes in the pore pressure of the hydrothermal fluids and discovered a stratified zone of high-grade copper-rich replacement mineralization below the massive sulphide deposit. This copper-rich zone represents a type of mineralization not previously observed below sea-floor deposits, and may provide new targets for land-based mineral exploration.

Nature↗

Rare earth mineral potential in the southeastern U.S. Coastal Plain from integrated geophysical, geochemical, and geological approaches

We combined geophysical, geochemical, mineralogical, and geological data to evaluate the regional presence of rare earth element (REE)−bearing minerals in heavy mineral sand deposits of the southeastern U.S. Coastal Plain. We also analyzed regional differences in these data to determine probable sedimentary provenance. Analyses of heavy mineral separates covering the region show strong correlations between thorium, monazite, and xenotime, suggesting that radiometric equivalent thorium (eTh) can be used as a geophysical proxy for those REE-bearing minerals. Airborne radiometric data collected during the National Uranium Resource Evaluation (NURE) program cover the southeastern United States with line spacing varying from ∼2 to 10 km. These data show eTh highs over Cretaceous and Tertiary Coastal Plain sediments from the Cape Fear arch in North Carolina to eastern Alabama; these highs decrease with distance from the Piedmont. Quaternary sediments along the modern coasts show weaker eTh anomalies, except near coast-parallel ridges from South Carolina to northern Florida. Prominent eTh anomalies are also observed over large riverbeds and their floodplains, even north of the Cape Fear arch where surrounding areas are relatively low. These variations were verified using ground geophysical measurements and sample analyses, indicating that radiometric methods are a useful exploration tool at varying scales. Further analyses of heavy mineral separates showed regional differences, not only in concentrations of monazite, but also of rutile and staurolite, and in magnetic susceptibility. The combined properties suggest the presence of subregions where heavy mineral sediments are primarily sourced from high-grade metamorphic, low-grade metamorphic, or igneous terrains, or where they represent a mixing of these sources. Comparisons between interpreted sources of heavy mineral sands near the Fall Line and igneous and metamorphic Piedmont and Blue Ridge units showed a strong correspondence with rocks closest to the Fall Line and poor correspondence with rocks farther inland. This strongly suggests that the primary source of those heavy minerals, especially monazite, is the rocks that formed the rocky coast that was present during opening of the Atlantic Ocean, which in turn indicates the importance of coastal processes in forming heavy mineral sand concentrations. Furthermore, narrow radiometric eTh and K anomalies are associated with major rivers, indicating limited spatial influence of fluvial processes. Later coastal plain sediment deposition appears to have involved reworking of sediments, providing an “inheritance” of the rocky coast composition that persists for some distance from the Fall Line. However, this inheritance is reduced with distance, and sediments within ∼100 km of the coast in Georgia and Florida exhibit properties indicative of mixing from multiple sources.

GSA Bulletin↗

Characterizing riverbed sediment using high-frequency acoustics 2: scattering signatures of Colorado River bed sediment in Marble and Grand Canyons

In this, the second of a pair of papers on the statistical signatures of riverbed sediment in high-frequency acoustic backscatter, spatially explicit maps of the stochastic geometries (length- and amplitude-scales) of backscatter are related to patches of riverbed surfaces composed of known sediment types, as determined by geo-referenced underwater video observations. Statistics of backscatter magnitudes alone are found to be poor discriminators between sediment types. However, the variance of the power spectrum, and the intercept and slope from a power-law spectral form (termed the spectral strength and exponent, respectively) successfully discriminate between sediment types. A decision-tree approach was able to classify spatially heterogeneous patches of homogeneous sands, gravels (and sand-gravel mixtures), and cobbles/boulders with 95, 88, and 91% accuracy, respectively. Application to sites outside the calibration, and surveys made at calibration sites at different times, were plausible based on observations from underwater video. Analysis of decision trees built with different training data sets suggested that the spectral exponent was consistently the most important variable in the classification. In the absence of theory concerning how spatially variable sediment surfaces scatter high-frequency sound, the primary advantage of this data-driven approach to classify bed sediment over alternatives is that spectral methods have well understood properties and make no assumptions about the distributional form of the fluctuating component of backscatter over small spatial scales.

Arizona↗

Strength recovery in quartzite is controlled by changes in friction in experiments at hydrothermal conditions up to 200°C

The rate of fault zone restrengthening between earthquakes can be influenced by both frictional and cohesive healing processes. Friction is dependent on effective normal stress while cohesion is independent of normal stress, potentially explaining—in part—the lack of depth dependence of earthquake stress drops. Although amenable to laboratory testing, few studies have systematically addressed the normal stress dependence of restrengthening rate. This is partially due to difficulty in separating relative contributions of friction and cohesion in recovery of fault strength. We present results from a series of slide-hold-slide tests on thin layers (≤10 𝜇m) of ultrafine quartz gouge that develop during shearing of initially bare-surface quartzite. Tests were conducted at 10 MPa constant pore pressure, 20–200 MPa constant effective normal stress, and temperatures of 22°–200°C. Restrengthening, defined as the difference between peak shear stress measured after resumption of sliding and steady-state sliding shear stress, increases with the log of hold duration. The 200°C healing rate, 0.014 per e-fold increase in time, is comparable to that determined from seismological observations along the Calaveras Fault, California. Construction of Mohr-Coulomb failure envelopes shows that changes in cohesion are small (<1 MPa) and independent of hold durations to 10 5 s, indicating that the increased strength is due to changes in the friction coefficient. These experimental results are inconsistent with the hypothesis that cohesive healing explains the depth independence of earthquake stress drop, but higher temperatures, longer time-scales, and more complex mineralogy could facilitate cohesive healing in natural fault systems.

Journal of Geophysical Research - Solid Earth↗

Exploring the dynamic interactions between the Southern San Andreas Fault and a normal fault under the Salton Sea

We investigate the dynamic interactions between the Southern San Andreas Fault (SSAF) and a proximal normal fault (NF) beneath the Salton Sea in southern California. The NF, positioned near the SSAF terminus at Bombay Beach, exhibits 11–15 displacement events across 14 stratigraphic sequences, with a range of 0.2–1.4 m of vertical offset since ∼2–3 ka. Notably, four of these events may align temporally with SSAF earthquakes, raising questions about the possible interplay between the two faults. Utilizing dynamic rupture models, we analyze the coseismic interactions between the SSAF and NF, addressing under what conditions the SSAF induces slip on the NF. Our findings reveal that a suite of SSAF ruptures, particularly those propagating from north to south, can trigger slip on the normal fault and replicate observed vertical offsets. If the SSAF extends beneath the Salton Sea, earthquakes originating south of the NF intersection are less likely to trigger normal fault slip, although we cannot exclude this possibility. Some SSAF ruptures do not trigger discernible slip on the NF, rendering such events undetectable in the stratigraphic record. Our research contributes toward discussions regarding the seismic hazard in southern California, shedding light on the interplay between the SSAF and NF.

California↗

Geodolite measurements of deformation near Hollister, California, 1971-1978

A 24‐station trilateration network spanning the San Andreas and Calaveras faults near Hollister, California, has been surveyed each year between 1971 and 1978, inclusive. Two moderate ( M L = 5) earthquakes have occurred within the network during the interval. No convincing preseismic or coseismic anomalies associated with those earthquakes have been identified. The deformation of the network can be described roughly by rigid body motion of the three blocks bounded by the two faults with accommodation occurring by right‐lateral strike slip on the San Andreas (13±2 mm/a) and Calaveras (17±2 mm/a) faults. The required slip rates are within the range of the observed fault creep on those faults. A more detailed analysis of the deformation indicates appreciable strain accumulation (0.4 μstrain/a tensor shear) within the block lying between the San Andreas and Calaveras faults. Many of the features of the observed deformation can be produced by an elementary dislocation model, indicating that most of the deformation is associated directly with slip on the major faults. The network is not extensive enough to define uniquely the relative motion across the San Andreas fault system, but the data are consistent with a value of about 38 mm/a. The rate of deformation in 1971–1978 was not uniform but rather appears to have been higher than normal in 1973–1974 and lower than normal in 1975–1976.

California↗

The Steens Mountain (Oregon) geomagnetic polarity transition, 2. Field intensity variations and discussion of reversal models

We carried out an extensive paleointensity study of the 15.5±0.3 m.y. Miocene reversed‐to‐normal polarity transition recorded in lava flows from Steens Mountain (south central Oregon). One hundred eighty‐five samples from the collection whose paleodirectional study is reported by Mankinen et al. (this issue) were chosen for paleointensity investigations because of their low viscosity index, high Curie point and reversibility, or near reversibility, of the strong field magnetization curve versus temperature. Application of the Thellier stepwise double heating method was very successful, yielding 157 usable paleointensity estimates corresponding to 73 distinct lava flows. After grouping successive lava flows that did not differ significantly in direction and intensity, we obtained 51 distinguishable, complete field vectors of which 10 are reversed, 28 are transitional, and 13 are normal. The record is complex, quite unlike that predicted by simple flooding or standing nondipole field models. It begins with an estimated several thousand years of reversed polarity with an average intensity of 31.5±8.5 μT, about one third lower than the expected Miocene intensity. This difference is interpreted as a long‐term reduction of the dipole moment prior to the reversal. When site directions and intensities are considered, truly transitional directions and intensities appear almost at the same time at the beginning of the transition, and they disappear simultaneously at the end of the reversal. Large deviations in declination occur during this approximately 4500±1000 year transition period that are compatible with roughly similar average magnitudes of zonal and nonzonal field components at the site. The transitional intensity is generally low, with an average of 10.9±4.9 μT for directions more than 45° away from the dipole field and a minimum of about 5 μT. The root‐mean‐square of the three field components X , Y , and Z are of the same order of magnitude for the transitional field and the historical nondipole field at the site latitude. However, a field intensity increase to pretransitional values occurs when the field temporarily reaches normal directions, which suggests that dipolar structure could have been briefly regenerated during the transition in an aborted attempt to reestablish a stationary field. Changes in the field vector are progressive but jerky, with at least two, and possibly three, large swings at astonishingly high rates. Each of those transitional geomagnetic impulses occurs when the field intensity is low (less than 10 μT) and is followed by an interval of directional stasis during which the magnitude of the field increases greatly. For the best documented geomagnetic impulse the rapid directional change corresponds to a vectorial intensity change of 6700±2700 nT yr −1 , which is about 15–50 times larger than the maximum rate of change of the nondipole field observed during the last centuries. The occurrence of geomagnetic impulses seems to support reversal models assuming an increase in the level of turbulence within the liquid core during transitions. The record closes with an estimated several thousand years of normal polarity with an average intensity of 46.7±20.1 μT, agreeing with the expected Miocene value. However, the occurrence of rather large and apparently rapid intensity fluctuations accompanied by little change in direction suggests that the newly reestablished dipole was still somewhat unstable.

Journal of Geophysical Research B: Solid Earth↗

Building damage survey and microtremor measurements for the source region of the 2015 Gorkha, Nepal, earthquake

We performed a damage survey of buildings and carried out microtremor observations in the source region of the 2015 Gorkha earthquake. Our survey area spans the Kathmandu valley and areas to the east and north of the valley. Damage of buildings in the Kathmandu valley was localized, and the percentage of the totally collapsed buildings was less than 5 %. East of the Kathmandu valley, especially in Sindhupalchok district, damage of buildings was more severe. In the center of Chautara and Bahrabise, towns in Sindhupalchok district, the percentage of the totally collapsed houses exceeded 40 %. North of the Kathmandu valley, the damage was moderate, and 20–30 % of the buildings were totally collapsed in Dhunche. Based on the past studies and our microtremor observations near the strong motion station, the H/V spectrum in Kathmandu has a peak at around 0.3 Hz, which reflects the velocity contrast of the deep sedimentary basin. The H/V spectra in Bahrabise, Chautara, and Dhunche do not show clear peaks, which suggests that the sites have stiff soil conditions. Therefore, the more severe damage outside the Kathmandu valley compared with the relatively light damage levels in the valley is probably due to the source characteristics of the earthquake and/or the seismic performance of buildings, rather than the local site conditions.

Earth, Planets and Space↗

Complex seasonal patterns of primary producers at the land-sea interface

Seasonal fluctuations of plant biomass and photosynthesis are key features of the Earth system because they drive variability of atmospheric CO 2 , water and nutrient cycling, and food supply to consumers. There is no inventory of phytoplankton seasonal cycles in nearshore coastal ecosystems where forcings from ocean, land and atmosphere intersect. We compiled time series of phytoplankton biomass (chlorophyll a ) from 114 estuaries, lagoons, inland seas, bays and shallow coastal waters around the world, and searched for seasonal patterns as common timing and amplitude of monthly variability. The data revealed a broad continuum of seasonal patterns, with large variability across and within ecosystems. This contrasts with annual cycles of terrestrial and oceanic primary producers for which seasonal fluctuations are recurrent and synchronous over large geographic regions. This finding bears on two fundamental ecological questions: (1) how do estuarine and coastal consumers adapt to an irregular and unpredictable food supply, and (2) how can we extract signals of climate change from phytoplankton observations in coastal ecosystems where local‐scale processes can mask responses to changing climate?

Ecology Letters↗

Part 3: Volcano investigations on Umnak Island, 1946

Umnak Island is a dumbbell-shaped island in the eastern part of the Aleutian Islands. The island is 70 miles long and trends northeast-southwest. During 1946 volcano investigations were begun on the island and geologic mapping of most of northeastern Umnak Island was completed. Okmok Volcano, a large, broad volcanic mountain rising to altitudes of 3,000 to 3,500 feet, occupies the central portion of northeastern Umnak Island. Fort Glenn, and Army airbase, is situated on the eastern end of the island, approximately 9 miles east of Okmok Volcano. The central part of Okmok Volcano is indented by Okmok caldera, a large cliff-rimmed volcanic depression, 7%, miles in maximum diameter. The floor of the caldera is 1,500 to 2,500 feet below the caldera rim. Nine large cinder cones and many small ones lie on the caldera floor, chiefly along two arcuate zones. The caldera is drained by Crater Creek, which flows through a deep gorge cut in the northeastern wall of the caldera, and into Bering Sea. Mount Tulik (4,111 feet altitude) and Mount Idak (1,918 feet altitude) arc important centers of ancient volcanism on the flanks of Okmok Volcano. The geologic history of Okmok Volcano falls into three stages: The first includes the upbuilding of an ancient cone—Mount Okmok—to an altitude of at least 6;500 feet on the site of the present caldera; the second encompasses the destruction in a castastrophic eruption of the summit cone and the formation of the caldera; the third comprises events since the great eruption. The earliest activity at Mount Okmok probably dates hack to the late Tertiary period. A composite cone, concave-sided in profile, was built by the alternate eruption of ash, coarse pyroclastics, and basalt flows. During the late Pleistocene, volcanic activity at Mount Okmok was greatly reduced and a topography of late youth was carved on the lower slopes by streams and valley glaciers. The summit of Mount Okmok was upwarped and dikes and necks were injected into the resulting fractures. A large volcano at the site of Mount Idak was active during part of the period of upbuilding at Mount Okmok but became extinct during the middle Pleistocene. A parasitic vent, Mount Tulik, became active during the late Pleistocene and built a steep-sided cone before it became extinct, shortly before the formation of Okmok caldera. A cataclysmic eruption terminated the period of dissection at Mount Okmok, 10,000 or more years ago. Part of the summit was blown away by the explosive violence of this eruption. Nuees ardentes (glowing clouds) and mudflows deposited tuff-breccia and agglomerate in the glacial valleys; later phases of the eruption blanketed the landscape with ash. Near the end of the eruption, the remaining upper part of the volcano collapsed along arcuate fractures: large blocks subsided several thousand feet and are now concealed in the caldera Poor beneath later deposits. A large arcuate fault block which subsided less than other blocks stands above the floor in the northeastern part of the caldera. After the eruption, water collected in the caldera, forming a lake. Small but frequently active cones built islands in the lake and covered its bottom with pyroclastic debris. The lake eventually overflowed the lowest point in the rim of the caldera, and Crater Creek Gorge was carved, draining the lake and dissecting its deposits. Renewed movement along faults at the head of Crater Creek Gorge later raised a harrier which temporarily dammed the drainage and formed a second caldera lake. Readjustments among subsided blocks in the caldera floor resulted in the folding of postcaldera deposits at several localities. Much of the caldera floor has been covered by lava flows extruded from several cones since the draining of the first caldera lake. In general, however, volcanic activity seems to have declined since the great caldera-forming eruption. Seven eruptions from cones on the caldera floor have been recorded since 1817; the latest occurred in 1945. As part of the geochemical program for the study of Okmok Volcano, temperatures of fumaroles were measured and samples of the products of the volcanic activity were analyzed. Average temperatures of fumaroles at one source of the 1945 lava low dropped from 320° C. on July 19 to 90° C. on September 5. The temperatures of fumaroles associated with the crater vents on both Cones A and C ranged from 95° C. to 97" C., which is slightly below the condensation point of steam, indicating the presence of minor quantities of gases other than steam. The magmatic gases of fumaroles on Cone A consisted of carbon dioxide and sulfur dioxide in about equal amounts. The lack of halogen acid gases in the fumaroles and the steadily dropping temperatures arc interpreted as indicating that the present quiescence of Cone A will continue for many months. Solid reaction products from areas of fumarolic activity on Cone A are sulfates of sodium, calcium, and iron. The presence of hydrogen sulfide as the dominant sulfur gas at Cone C is interpreted as indicating the dying stages of the present cycle of activity of Cone C. Thermal springs along the north base of Cone D have a total discharge of 115 cubic feet per second. Their average temperature is approximately 7° C. above the annual mean. From these figures it is calculated that about 21,000 kilogram calories per second are being given off by Cone D. The spring waters contain minute quantities of boron which is indicative of a magmatic source for a small part of the water. Hence, Cone D though quiescent is not extinct. Evidence is presented to show that most of the spring water from Cone D is meteoric in origin. Thermal waters in the southwestern part of Umnak Island at Hot Springs Cove and south of Geyser Bight contain lithium, boron, arsenic, and antimony in solution. These elements are regarded as derived from underlying magmas that are in an advanced state of crystallization and hence not likely to give rise in the near future to large-scale volcanic activity. Three portable seismographs were placed on the flanks of Okmok Volcano and were in operation during most of the period from June 1 to October 1. During this period several slight tremors and one moderate tremor, all of distant origin, were registered, but no tremors attributable to Okmok Volcano were recorded. The lack of tremor records, however, may have been due more to the insensitivity of the instruments than to the absence of tremors. Earth-current investigations were carried on during August and September by comparison of records obtained from a base station at Fort Glenn with those from a station 1 V2 miles southwest of Mount Tulik. The records obtained indicate that no difference in magnitude or direction of earth currents existed between the Fort Glenn and Mount Tulik areas. The similarity of record obtained is indicative of the absence of a disturbing factor such as a large body of live magma beneath Okmok Volcano. Future eruptions of Okmok Volcano are expected to he of mild to moderate intensity, and will he chiefly in the form of ash falls from vents inside the caldera. There would be a great menace—in the form of lava flows, nuees ardentes, and mudflows—to installations at Fort Glenn if a new center of volcanism came into existence on the east slope of Okmok Volcano. Small postcaldera cones now exposed there indicate that extra-caldera eruptions have occurred in the recent past and can be expected in the future. The possibility of another catastrophic eruption of the caldera-forming type, however, is remote. Okmok Volcano should be kept under close observation, partly because of its possible threat to Fort Glenn and partly because it is a readily accessible locale for accumulating information on details of volcanic processes, applicable to other volcanoes in the Aleutian arc and elsewhere.

Alaska↗

River channel response to invasive plant treatment across the American Southwest

Invasive riparian plants were introduced to the American Southwest in the early 19th century and contributed to regional trends of decreasing river channel width and migration rate in the 20th century. More recently, efforts to remove invasive riparian vegetation (IRV) have been widespread, especially since 1990. To what extent has IRV treatment reversed the earlier trend of channel narrowing and reduced dynamism? In this study, paired treated and untreated reaches at 15 sites along 13 rivers were compared before and after IRV treatment using repeat aerial imagery to assess long-term (~10-year) channel change due to treatment on a regional scale across the Southwest USA. We found that IRV treatment significantly increased channel width and floodplain destruction. Treated reaches had higher floodplain destruction than untreated reaches at 14 of 15 sites, and IRV treatment increased the rate of floodplain destruction by a median factor of 1.9. The effect of treatment increased with the stream power of the largest flow over the study period. Resolving observations of channel change into separate measures of floodplain destruction and formation provided more information on underlying processes than simple measurements of channel width and centerline migration rate. Restoration practitioners who perform IRV treatment projects often focus on wildlife or vegetation response; however, geomorphic processes should be considered in restoration planning because they drive aquatic habitat and vegetation dynamics, and because of the potential for damage to downstream infrastructure. Depending on the restoration goal, management practices can be used to enhance or minimize the increase in channel dynamism caused by IRV treatment.

Arizona, California, Colorado, New Mexico, Texas, ↗

Microscale spatial variations in coseismic temperature rise on hematite fault mirrors in the Wasatch fault damage zone

Coseismic temperature rise activates fault dynamic weakening that promotes earthquake rupture propagation. The spatial scales over which peak temperatures vary on slip surfaces are challenging to identify in the rock record. We present microstructural observations and electron backscatter diffraction data from three small-displacement hematite-coated fault mirrors (FMs) in the Wasatch fault damage zone, Utah, to evaluate relations between fault properties, strain localization, temperature rise, and weakening mechanisms during FM development. Millimeter- to cm-thick, matrix-supported, hematite-cemented breccia is cut by ∼25–200 μm-thick, texturally heterogeneous veins that form the hematite FM volume (FMV). Grain morphologies and textures vary with FMV thickness over μm to mm lengthscales. Cataclasite grades to ultracataclasite where FMV thickness is greatest. Thinner FMVs and geometric asperities are characterized by particles with subgrains, serrated grain boundaries, and(or) low-strain polygonal grains that increase in size with proximity to the FM surface. Comparison to prior hematite deformation experiments suggests FM temperatures broadly range from ≥400°C to ≥800–1100°C, compatible with observed coeval brittle and plastic deformation mechanisms, over sub-mm scales on individual slip surfaces during seismic slip. We present a model of FM development by episodic hematite precipitation, fault reactivation, and strain localization, where the thickness of hematite veins controls the width of the deforming zones during subsequent fault slip, facilitating temperature rise and thermally activated weakening. Our data document intrasample coseismic temperatures, resultant deformation and dynamic weakening mechanisms, and the length scales over which these vary on slip surfaces.

Utah↗

Geomagnetic paleointensities from excursion sequences in lavas on Oahu, Hawaii

Paleomagnetic data demonstrating three late Tertiary excursions in the direction of the geomagnetic field recorded in sequences of basaltic lavas on the island of Oahu, Hawaii were published by R. R. Doell and G. B. Dalrymple in 1973. We have determined geomagnetic paleointensities by the Thelliers' method for 14 lavas from the three sites. During these experiments, considerable difficulty was encountered because of the presence of titanomaghemite in many lavas and the contamination of natural remanent magnetization by lightning in many others. Moreover, we often observed the production of spurious high‐temperature chemical remanent magnetization during the Thellier experiments. An analysis of this particularly troublesome problem is presented. Two of the sites showed low paleointensities associated with angular departures of the paleomagnetic field direction from that of a geocentric axial dipole, which suggests that these excursions represent aborted reversals or fragments of reversals. At the third site, however, the paleointensity did not become low as the field diverged. This excursion may reflect the variation of a large nondipole source near Hawaii.

Hawaii↗

An enhanced model of land water and energy for global hydrologic and earth-system studies

LM3 is a new model of terrestrial water, energy, and carbon, intended for use in global hydrologic analyses and as a component of earth-system and physical-climate models. It is designed to improve upon the performance and to extend the scope of the predecessor Land Dynamics (LaD) and LM3V models by better quantifying the physical controls of climate and biogeochemistry and by relating more directly to components of the global water system that touch human concerns. LM3 includes multilayer representations of temperature, liquid water content, and ice content of both snowpack and macroporous soil–bedrock; topography-based description of saturated area and groundwater discharge; and transport of runoff to the ocean via a global river and lake network. Sensible heat transport by water mass is accounted throughout for a complete energy balance. Carbon and vegetation dynamics and biophysics are represented as in LM3V. In numerical experiments, LM3 avoids some of the limitations of the LaD model and provides qualitatively (though not always quantitatively) reasonable estimates, from a global perspective, of observed spatial and/or temporal variations of vegetation density, albedo, streamflow, water-table depth, permafrost, and lake levels. Amplitude and phase of annual cycle of total water storage are simulated well. Realism of modeled lake levels varies widely. The water table tends to be consistently too shallow in humid regions. Biophysical properties have an artificial stepwise spatial structure, and equilibrium vegetation is sensitive to initial conditions. Explicit resolution of thick (>100 m) unsaturated zones and permafrost is possible, but only at the cost of long (≫300 yr) model spinup times.

Journal of Hydrometeorology↗